Abstract
In this study, three kinds of engineering metals, which are aluminum (1100-H12), commercially pure titanium and mild steel were combined as particle/substrate and classified into four cases, i.e., soft/soft, hard/hard, hard/soft and soft/hard, according to their physical and mechanical properties respectively. Based on finite element modeling, impacting interface elements of four cases were analyzed and impact behaviors were numerically characterized. For soft/soft and hard/hard cases, the maximum temperature at the substrate side, which approached melting point, is higher than that of particle side when the shear instabilities occur. In particular, the different size of thermal boost-up zone was numerically estimated and theoretically discussed for these two cases. Meanwhile, for soft/hard and hard/soft cases, the specific aspect of shear instability, which has very high heat-up rate, was always observed at the relatively soft impact counterpart, and a thin molten layer was expected as well. Thus, the successful bonding of the above mentioned four cases can be predicted as a result of the synergistic effect of localized shear instability with interfacial melting.
