Hydroxyapatite/polymer composite coatings of different volume ratios were produced using a Plastic Flame Spray (PFS) system. The intent of this processing is to obtain a coating with an optimal combination of biological and mechanical properties of these two materials for skeletal implants. The composite coatings were produced with a mechanical blend of EMMA and hydroxyapatite powder from a fluidized bed powder feeder. Characterization was conducted by scanning electron microscopy on the surface morphology, polished cross-sections and fracture surface morphology of the coatings. The bioactivity of the coatings was evaluated with a calcium ion meter, and the stress-strain behavior was investigated by tensile testing. The biological and mechanical properties were found to be related to the volume and the distribution of the hydroxyapatite in the polymer matrix.

This content is only available as a PDF.
You do not currently have access to this content.