Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2025: Proceedings from the International Thermal Spray Conference

Cold Sprayed or Aerosol Deposition: Metals, Polymers, Ceramics, and Metal Matrix Composite Coatings

Modification of Cold Sprayed Inconel 625 Deposits by Laser Shock Peening

Farrokh Taherkhani; Max Gündel; Frank Gärtner; Thomas Klassen; Nikolai Kashaev

ITSC 2025; 1-6https://doi.org/10.31399/asm.cp.itsc2025p0001

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The Influence of Nozzle Geometry on Aerosol Deposition Studied Using 3D Computational Fluid Dynamics Simulations

Julio Gutierrez; Andreas Elsenberg; Luca Bachnick; Frank Gärtner; Thomas Klassen

ITSC 2025; 7-14https://doi.org/10.31399/asm.cp.itsc2025p0007

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Serendipitous Deposition of Composite Coatings by Aerosol Deposition

Zhenying Yang; Ali Dolatabadi; Thomas W. Coyle

ITSC 2025; 198-205https://doi.org/10.31399/asm.cp.itsc2025p0198

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influence of Design and Thermal Spraying Methods on the Techno-Economic Outcomes of a Coating-Based Deicing System for Mitigating Frozen Pipe Incidents

Milad Rezvani Rad; Peter Menghesha; Maria Ophelia Jarligo; André McDonald

ITSC 2025; 221-229https://doi.org/10.31399/asm.cp.itsc2025p0221

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Cold Sprayed Bell Metal: Improving Adhesion by Substrate Laser Surface Texturing

O. Kovarik; M. Baryshnikova; R. Singh; J. Kondas; S. Kraft; D. Bartocha; J. Cizek

ITSC 2025; 391-397https://doi.org/10.31399/asm.cp.itsc2025p0391

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Numerical Analysis of Fine Particle Behavior in Supersonic Hybrid Aerosol Deposition

Yuki Akedo; Kentaro Shinoda; Takayasu Fujino

ITSC 2025; 442-449https://doi.org/10.31399/asm.cp.itsc2025p0442

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Key Factors Governing the Deposition of Hard Phases When Cold Spraying Metallic Matrix with Mechanically Mixed Powders

XiaoTao Luo; ZengHui Du; ChangJiu Li

ITSC 2025; 484-491https://doi.org/10.31399/asm.cp.itsc2025p0484

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of Heat Treatment on Oxide Coatings Deposited by Hybrid Aerosol Deposition

Kentaro Shinoda; Mitsugu Sato; Mohammed Shahien; Takashi Nagoshi; Masato Suzuki

ITSC 2025; 492-499https://doi.org/10.31399/asm.cp.itsc2025p0492

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Thermal and Environmental Barrier Coatings for Gas Turbines

Effects of Various Air Plasma Spraying Processes on the Spraying Power and Bond Strength of Yb₂Si₂O₇/Si-HfO₂ Environmental Barrier Coatings

Kaibin Li; Weize Wang; Shilong Yang; Yangguang Liu; Hongchen Li; Wenkang Zhang; Changliang Wang; Xiuxin Du

ITSC 2025; 15-22https://doi.org/10.31399/asm.cp.itsc2025p0015

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Performance Comparison of Atmospheric Plasma Spraying and Plasma Spraying Physical Vapor Deposition for Environmental Barrier Coatings

Xiaofeng Zhang; Min Liu; Ziqian Deng; Chunming Deng; Changguang Deng

ITSC 2025; 52-59https://doi.org/10.31399/asm.cp.itsc2025p0052

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The Influence of Particle Size Distribution for Homogeneity of Ytterbium Silicate Coating Prepared by Atmospheric Plasma Spraying

Kohei Seki; Shinya Watanabe; Takaya Masuda; Hiroyuki Ibe

ITSC 2025; 457-464https://doi.org/10.31399/asm.cp.itsc2025p0457

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Treatment of Columnar YSZ Coatings Produced by Suspension Plasma Spraying

Peyman Saffarzade; Amit Roy; Fadhel Ben Ettouil; Martin Pugh; Christian Moreau; Rogerio S. Lima

ITSC 2025; 477-483https://doi.org/10.31399/asm.cp.itsc2025p0477

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Wear and Corrosion Protection Applications

Evaluation of Thermal Sprayed Corrosion Protection Systems on Cast Materials for Use in Marine Power Plants

Michél Hauer; Lukas Möhrke; Pratidhwani Biswal; Benjamin Ripsch; Andreas Gericke; Knuth-Michael Henkel

ITSC 2025; 23-30https://doi.org/10.31399/asm.cp.itsc2025p0023

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optimization of Cr₃C₂-NiCr Coatings Using ID-HVOF: A Statistical Approach to Key Process Parameters

Mark Dennis Kensy; Ingor Baumann; Jonas Zajaczkowski; Leif Hagen; Wolfgang Tillmann

ITSC 2025; 287-294https://doi.org/10.31399/asm.cp.itsc2025p0287

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High-Velocity Oxygen Fuel Sprayed Cr-Coating on Zircaloy-4 Fuel Cladding for Accident-Tolerant Fuel Applications

Satish Tailor; Ankur Modi

ITSC 2025; 335-339https://doi.org/10.31399/asm.cp.itsc2025p0335

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Thermally Sprayed Coatings for Concrete Protection in Cold Marine Environments

Betül Aktas; Heli Koivuluoto; Magdalena Rajczakowska; Andrzej Cwirzen

ITSC 2025; 369-375https://doi.org/10.31399/asm.cp.itsc2025p0369

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Pre-Oxidized High-Velocity Oxygen Fuel Sprayed CoNiCrAlY Coating as An Environmental Barrier Against Ammonia Corrosion for Pure Ammonia Combustion Gas Turbines

Tina Ghara; Seiji Kuroda; Takashi Yanagisawa; Mohammed Shahien; Kentaro Shinoda; Masato Suzuki; Takahiro Inoue

ITSC 2025; 450-456https://doi.org/10.31399/asm.cp.itsc2025p0450

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Oxidation Resistance of High-Velocity Oxygen Fuel Sprayed WC-Cr₃C₂-Ni Hardmetal Coatings

Lutz-Michael Berger; Kerstin Gnauck; Susan Conze

ITSC 2025; 465-470https://doi.org/10.31399/asm.cp.itsc2025p0465

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Cold Spray Process Fundamentals, Simulation, and Particle Impact

Considerations for Estimating Bow Shock Stand-Off Distance in Cold Spray Supersonic Jet Impingement

Mehdi Barhoumi; Francis M. Haas

ITSC 2025; 31-37https://doi.org/10.31399/asm.cp.itsc2025p0031

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Numerical Prediction of Critical Velocity and Spray Angle Windows for Particle Adhesion in Cold Spray Using Peridynamic Simulations

Haijun Zhang; Baihua Ren; Stephen Yue; Jun Song

ITSC 2025; 74-79https://doi.org/10.31399/asm.cp.itsc2025p0074

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Deposition Simulation for an Automated Cold Spray Additive Manufacturing Process

Eckart Uhlmann; Thomas Braun; Xinyu Zhang

ITSC 2025; 112-119https://doi.org/10.31399/asm.cp.itsc2025p0112

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The Role of Strain-Induced Heat in Cold Spray Bonding: A Numerical Study

M. Reza Hirmand; Hamid Jahed

ITSC 2025; 137-144https://doi.org/10.31399/asm.cp.itsc2025p0137

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Towards Visually Observing Viscoelastic Behavior in Polymer Cold Spray Using Ultra High-Speed Videography

Elias T. Timmons; Joseph F. Stanzione, III; Francis M. Haas; Tristan W. Bacha

ITSC 2025; 295-301https://doi.org/10.31399/asm.cp.itsc2025p0295

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Feedstock Modification and Microstructural Characterization of Cold Spraying of Inconel 718

Parcelino Sudigdo; Abdussamed Aǧır; Kah Leng; Tanvir Hussain; Philip McNutt; Dàniel Kóti; Chris Bennett

ITSC 2025; 420-427https://doi.org/10.31399/asm.cp.itsc2025p0420

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Novel Coatings

Exploring Three Approaches for Carbon Additions to WC-Co Feedstock to Mitigate In-Flight Carbon Loss

Steven Matthews; Ingrid Horide; Miranda Graham; Sophie Hogan

ITSC 2025; 38-44https://doi.org/10.31399/asm.cp.itsc2025p0038

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Characterization of High-Velocity Oxygen Fuel and Shrouded Plasma Sprayed Cr₃C₂-CoNiCrAlY Coatings: Feedstock, As-Sprayed, and Equilibrium Heat-Treated Coatings

Steven Matthews; Praoporn Tangtrakulcharoen; Lutz-Michael Berger

ITSC 2025; 45-51https://doi.org/10.31399/asm.cp.itsc2025p0045

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Plasma Sprayed Wear-Resistant, Low-Friction, and Non-Stick Quasicrystalline Al-Cu-Fe Coatings

Ingor Baumann; Jonas Zajaczkowski; Mukul Aravind Kada; Dennis Kensy; Wolfgang Tillmann; Monika Kipp; Jannis Saelzer; Dirk Biermann; Marko Sipura; Nenad Piljic

ITSC 2025; 105-111https://doi.org/10.31399/asm.cp.itsc2025p0105

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Particle Investigation of Mechanically Alloyed Refractory High-Entropy Alloy as Feedstock for Cold Spray Additive Manufacturing

Marvin S. Tolentino; Aisa Grace D. Custodio; Clodualdo Aranas, Jr.; C. Gobinda Saha

ITSC 2025; 316-321https://doi.org/10.31399/asm.cp.itsc2025p0316

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Sustainable WC-Fe Based Coatings by High-Velocity Air Fuel Spraying: A Potential Alternative to WC-Co Based Coatings

Vasanth Gopal; Antonin Riche; Stefan Björklund; Mohit Gupta; Shrikant Joshi; Oliver Lanz; Sedigheh Bigdeli

ITSC 2025; 346-353https://doi.org/10.31399/asm.cp.itsc2025p0346

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Plasma-Sprayed NiCrCuMoB High Entropy Alloy Coating with Low Oxide Content Enabled by Boron Alloyed Powder

Xin-Ru Li; Xiao-Tao Luo; Chang-Jiu Li

ITSC 2025; 361-368https://doi.org/10.31399/asm.cp.itsc2025p0361

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Equipment, Powder, Consumables, and Economics

Investigation of Process Stability and Effectiveness Using a Multi-Arc Spraying Torch with Axial Suspension Injection

J. Schmitt; R. Vaßen; G. Mauer; S. Zimmermann; C. Kirner; J. Schein

ITSC 2025; 60-67https://doi.org/10.31399/asm.cp.itsc2025p0060

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optimizing a Modular Cascaded Plasma Torch to Manufacture Dense Alumina Coatings with High Spray Efficiency

Myriam Sleiman; Geoffrey Darut; Ralph Seulin; Marie Pierre Planche; Jean-Jacques Gonzalez; Pierre Freton; Francis Sambou; Armando Salito; Manfred Rösli

ITSC 2025; 129-136https://doi.org/10.31399/asm.cp.itsc2025p0129

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The Effect of High Energy Ball-Milling Process on Mechanical Alloying of WC-Hastelloy Material

Jinhe Yang Feng Gao; Lei Huang; Keyi Huang; Jie Li; Luyan Wang; Zhengliang Li; Xinyu Ke

ITSC 2025; 159-164https://doi.org/10.31399/asm.cp.itsc2025p0159

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Novel Processes: Hybrid Manufacturing, Laser Processing, Additive Manufacturing and Repair

Surface Strengthening of Steel by High-Velocity Cold Spray Shot Peening

Zhijie Zhang; Hanqing Che

ITSC 2025; 68-73https://doi.org/10.31399/asm.cp.itsc2025p0068

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High Power Laser Cladding Compared to Conventional Plasma Transfer Arc Cladding: Microstructural Morphology and Wear Resistance of a NiCrSiFeB Alloy

Michael Schubert; Kai Treutler; Swenja Lorenz; Volker Wesling

ITSC 2025; 80-86https://doi.org/10.31399/asm.cp.itsc2025p0080

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Additive Manufacturing of a Corrosion Resistant Tool Steel with an Outlook to Further Application

Horst Hill; Jasmin Lang

ITSC 2025; 93-98https://doi.org/10.31399/asm.cp.itsc2025p0093

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influence of Carrier Gas and Post-Heat Treatment on the Microstructure and Tensile Properties of 3D-Printed Cold Spray Copper

Niloofar Eftekhari; Hamid Jahed

ITSC 2025; 153-158https://doi.org/10.31399/asm.cp.itsc2025p0153

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influence of Hydrogen-Enhanced Annealing on the Morphology of Atmospheric Plasma Sprayed Copper

Manuela Ockel; Ida Albrecht; Aleyna Gökçen; Nils Thielen; Jörg Franke; Florian Risch

ITSC 2025; 186-191https://doi.org/10.31399/asm.cp.itsc2025p0186

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Additive Brazing for New Part Production, Remanufacturing, and Wear Protection

Ino Rass; Timo Kolberg

ITSC 2025; 214-220https://doi.org/10.31399/asm.cp.itsc2025p0214

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Additive Manufacturing of cBN-Copper Grinding Wheel Coatings via High Pressure Cold Gas Spraying

W. Tillmann; J. F. Zajaczkowski; I. Baumann

ITSC 2025; 281-286https://doi.org/10.31399/asm.cp.itsc2025p0281

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Residual Stresses Relief in Selective Laser Melting and Hot Rolled 316L Stainless Steel

F. Azarmi; D. Shrestha; HR. Salimijazi

ITSC 2025; 329-334https://doi.org/10.31399/asm.cp.itsc2025p0329

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Advanced Repair Development in Stationary Gas Turbine Combustion Components

Bernd Burbaum; Ingo Just; Matthias Gralki; Matthias Kuhlee; Stefan Dederichs

ITSC 2025; 340-345https://doi.org/10.31399/asm.cp.itsc2025p0340

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Mechanical and Fracture Properties for As-Built 3DMD Inconel 718: Stability to Process Parameters Variation

O. Kovarik; S. Maffia; T. Stittgen; F. Wick; V. Lukes; J. Cizek

ITSC 2025; 434-441https://doi.org/10.31399/asm.cp.itsc2025p0434

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Cold/Thermal Spray Additive Manufacturing

Magnetic Performance and Microstructural Characterization of Cold Sprayed Ferromagnetic Materials

Hassan Hammouda; Sabeur Msolli; Nouredine Fenineche; Hanlin Liao; Olivier Marconot; Sihao Deng

ITSC 2025; 87-92https://doi.org/10.31399/asm.cp.itsc2025p0087

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Machine Learning Optimization of IN625 Coating Properties in Cold Spray Process

Avneesh Kumar; Marek Vostrak; Sarka Houdkova; Thibaut De Terris

ITSC 2025; 206-213https://doi.org/10.31399/asm.cp.itsc2025p0206

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Heat Treatment for Improved Cold-Sprayed Copper Coating Ductility

D. Poirier; B. Guerreiro; B. Jodoin; A. Weck; J.D. Giallonardo

ITSC 2025; 376-383https://doi.org/10.31399/asm.cp.itsc2025p0376

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Vitrification Processing of Thermally Sprayed Enamel Coatings

Filofteia-Laura Toma; Irina Shakhverdova; Anja Meyer; Annegret Potthoff; Imanol Cuevas; Juan Isaza; Maria Angeles Corres; Jaime Ochoa Saenz de Lafuente; Jens Putzier

ITSC 2025; 398-405https://doi.org/10.31399/asm.cp.itsc2025p0398

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Online Cold Spray Process Monitoring by Real Time Diagnostics

Heli Koivuluoto; Yaman Sahu; Reza Jafari; Jussi Larjo

ITSC 2025; 406-412https://doi.org/10.31399/asm.cp.itsc2025p0406

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influence of Pulsed Laser Ablation Parameters on Adhesion of Cold Spray Al6061 Coatings on Extruded Al6061 Substrates

Jagannadh Sripada; Alexis Thibault; Philippe Bocher; Jean-François Béland; Phuong Vo; Éric Irissou

ITSC 2025; 413-419https://doi.org/10.31399/asm.cp.itsc2025p0413

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microstructural Evolution and Mechanical Characterization of Cold Spray Additively Manufactured Copper: A Story of Heat Treatment

Amina. Hussain; T. Hussain; D. Koti; L.A. Parry

ITSC 2025; 471-476https://doi.org/10.31399/asm.cp.itsc2025p0471

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Surface Preparation, Load-bearing, Tribology, Corrosion, Abradable, and Repair

Microstructural Study of Nickel Chromium Coating with Complex Composition for High-Performance Application

Nadia Akter; Grace Wagner; Fardad Azarmi; Ying Huan

ITSC 2025; 99-104https://doi.org/10.31399/asm.cp.itsc2025p0099

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A Comprehensive Review of High-Temperature Ceramic Abradable Coatings Used in Aero and Industrial Gas Turbines

M. Ghorban; P. Stoyanov; R S. Lima

ITSC 2025; 120-128https://doi.org/10.31399/asm.cp.itsc2025p0120

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Research on the Performance of Plasma-Sprayed Aluminum Bronze Polyester Coating

Tong Liu; Deming Zhang; Jianming Liu; Dan Guo; Yueguang Yu

ITSC 2025; 172-178https://doi.org/10.31399/asm.cp.itsc2025p0172

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

AI, Machine Learning, Materials and Process Informatics, Modeling and Simulations

Enhancement and Validation of Diagnostic Systems for the Measurement of Particle Properties in High-Kinetic Thermal Spray Processes

Georg Mauer; Johannes C. Schmitt; Karl-Heinz Rauwald; Robert Vaßen; Jussi Larjo

ITSC 2025; 145-152https://doi.org/10.31399/asm.cp.itsc2025p0145

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Solid Shroud for Energy Efficiency and Oxidation Control in Plasma Spraying

K. Bobzin; H. Heinemann; K. Jasutyn

ITSC 2025; 230-236https://doi.org/10.31399/asm.cp.itsc2025p0230

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Comparison and Parametric Analysis of SPS Coatings Fabricated with Conventional and Cascaded Torches

Zhoukun Shi; Marie-Pierre Planche; Geoffrey Darut; Hanlin Liao

ITSC 2025; 245-252https://doi.org/10.31399/asm.cp.itsc2025p0245

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

AccurasprayHub: Leveraging AI and Machine Learning to Define and Optimize Process Windows in Thermal Spray Operations

J.N. Robert; D. Georgaris; J.F. Henri; D. Lessard; T. Garcin; A. Nadeau

ITSC 2025; 310-315https://doi.org/10.31399/asm.cp.itsc2025p0310

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Double Effect of Super-Hot Molten Droplets on the Formation of Oxide-Free Metal Droplets and Intersplat Bonding during APS Using Deoxidizer-Containing Powders

Chang-Jiu Li; Yong-Sheng Zhu; Xiao-Tao Luo; Xin-Yuan Dong; Xuan Xue

ITSC 2025; 354-360https://doi.org/10.31399/asm.cp.itsc2025p0354

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Novel Powders and Advances in Feedstock Materials

Nonfluorinated Superhydrophobic TiO₂-Based Coatings by Suspension Flame Spraying

Razieh Alikhanifaradonbeh; Reza Jafari; Jarkko Lehti; Anssi Metsähonkala,; Heli Koivuluoto

ITSC 2025; 165-171https://doi.org/10.31399/asm.cp.itsc2025p0165

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Characterization and Cold Spray Performance of Ultrasonically Atomized 316 Stainless Steel Powders

D. Poirier; J. Orlandi; B. Guerreiro; M. Martin; S. Yue

ITSC 2025; 384-390https://doi.org/10.31399/asm.cp.itsc2025p0384

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Young Professionals

Catalytic Decomposition of Methane Using Thermally Sprayed Coatings

P. Biswal; M. Hauer; L. Möhrke; A. Gericke; Knuth-Michael Henkel

ITSC 2025; 179-185https://doi.org/10.31399/asm.cp.itsc2025p0179

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influence of Secondary Parameters in Cold Gas Spraying of 6061 Aluminum

Luca Klingler; Sören Nielsen; Alexander List; Frank Gärtner; Thomas Klassen

ITSC 2025; 302-309https://doi.org/10.31399/asm.cp.itsc2025p0302

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A Novel Advanced Photocatalytic Coatings of TiO₂-Fe₃O₄ Graphene Oxide via Aerosol Deposition

Azadeh Vahedi; Thomas W. Coyle; Javad Mostaghimi

ITSC 2025; 500-507https://doi.org/10.31399/asm.cp.itsc2025p0500

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Characterization and New Evaluation Techniques

Optimizing Thin Electric Functional Copper Coatings via Atmospheric Plasma Spray: Impact of Particle Temperature and Velocity

Aleyna Gökçen; Manuela Ockel; Matthias Petersen; Nils Thielen; Jörg Franke; Florian Risch

ITSC 2025; 192-197https://doi.org/10.31399/asm.cp.itsc2025p0192

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Infrared Pyrometric Technique for In-Situ Temperature Measurements Inside the Substrate in Atmospheric Plasma Spray Coating Processes

Jose Martínez-García; Venancio Martínez-García; Andreas Killinger

ITSC 2025; 261-267https://doi.org/10.31399/asm.cp.itsc2025p0261

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Use of Thermally Sprayed Heating Elements on Free-Form Geometries for Use in Plastic Injection Moulds

K. Bobzin; H. Heinemann; M. Erck; J. Körner

ITSC 2025; 322-328https://doi.org/10.31399/asm.cp.itsc2025p0322

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

ITSC Poster Session

Reshaping Thermal Spraying: Explainable Artificial Intelligence Meets Plasma Spraying

K. Bobzin; H. Heinemann; M. Erck; G. Nassar

ITSC 2025; 237-244https://doi.org/10.31399/asm.cp.itsc2025p0237

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Modeling the Formation of Thermal Spray Coatings on a Rough Substrate

Behrouz Haghighi; Mohammad Passandideh-Fard; Javad Mostaghimi

ITSC 2025; 253-260https://doi.org/10.31399/asm.cp.itsc2025p0253

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Application of Multilayer Coatings in the Waste Incinerator ZEVO Pilsen

Zdeněk Česánek; Jiří Frank; Jakub Antoš; Tomáš Taranda; Marek Vostřák; Jan Hruška; Pavel Veselý

ITSC 2025; 268-273https://doi.org/10.31399/asm.cp.itsc2025p0268

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Isothermal Oxidation Behavior of Multilayered Thermal Barrier Coatings

Arezoo Sezavar; Seyed Abdolkarim Sajjadi

ITSC 2025; 428-433https://doi.org/10.31399/asm.cp.itsc2025p0428

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Climate Action for Carbon Neutrality, Battery and Sustainable Energy Applications

New Interface for PEMWE Electrolysis by Thermally Sprayed BPP-PTL-Compound

K. Bobzin; H. Heinemann; M. Erck; K. Radermacher

ITSC 2025; 274-280https://doi.org/10.31399/asm.cp.itsc2025p0274

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Repair, Refurbishment, and Remanufacturing for the Circular Economy

Increasing the Mechanical Characteristics of the Disc Harrow Component by APS Thermal Coatings

Corneliu Munteanu; Bogdan Istrate; Fabian Cezar Lupu; Marcelin Benchea

ITSC 2025; 508-514https://doi.org/10.31399/asm.cp.itsc2025p0508

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Volume Information

ITSC 2025 Organizing Committee

ITSC 2025; iii-vhttps://doi.org/10.31399/asm.cp.itsc2025fm01

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text