Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2024: Proceedings from the International Thermal Spray Conference

Industry Applications

Development of Dense and Low Oxide Titanium Coatings for PEMWE Application

K. Bobzin; H. Heinemann; E. Olesch; K. Radermacher

ITSC 2024; 1-7https://doi.org/10.31399/asm.cp.itsc2024p0001

View Articletitled, Development of Dense and Low Oxide Titanium Coatings for PEMWE Application

Plasma-Spray Deposition of Na₃Zr₂Si₂PO₁₂ Electrolyte for High Performance all Solid-State Sodium-Ion Battery

Xiao-Chen Bu; Nan Chen; Xiao-Tao Luo; Chang-Jiu Li

ITSC 2024; 8-16https://doi.org/10.31399/asm.cp.itsc2024p0008

View Articletitled, Plasma-Spray Deposition of Na<sub>3</sub>Zr<sub>2</sub>Si<sub>2</sub>PO<sub>12</sub> Electrolyte for High Performance all Solid-State Sodium-Ion Battery

Cold Atmospheric Plasma Metallization of Power Semiconductor Devices with CuSn Pseudo-Alloys for Diffusion Soldering

Manuela Ockel; Aleyna Gökçen; Bettina Ottinger; Matthias Petersen; Christian Voigt; Jörg Franke

ITSC 2024; 17-26https://doi.org/10.31399/asm.cp.itsc2024p0017

View Articletitled, Cold Atmospheric Plasma Metallization of Power Semiconductor Devices with CuSn Pseudo-Alloys for Diffusion Soldering

Thermally Sprayed Coatings for Dynamic Magnetic Data Storage

M. Nicolaus; M. Arndt; M. Wurz; K. Möhwald; H. J. Maier

ITSC 2024; 34-39https://doi.org/10.31399/asm.cp.itsc2024p0034

View Articletitled, Thermally Sprayed Coatings for Dynamic Magnetic Data Storage

Processing and Suspension Plasma Spray Deposition of ZrO₂-Based Ceramic Materials for Thermal Barrier Coatings

María Catalina Galeano Camacho; Hélène Ageorges; J. Muñoz-Saldaña

ITSC 2024; 75-82https://doi.org/10.31399/asm.cp.itsc2024p0075

View Articletitled, Processing and Suspension Plasma Spray Deposition of ZrO<sub>2</sub>-Based Ceramic Materials for Thermal Barrier Coatings

Cold Spray of Ta-Ag Composites: Correlation Between Microstructure and Antibacterial Properties

Pengfei Yu; Gopinath Perumal; Katelyn J Genoud; Rocco Lupoi; Shuo Yin; Fergal J O'Brien; Dermot Brabazon

ITSC 2024; 83-99https://doi.org/10.31399/asm.cp.itsc2024p0083

View Articletitled, Cold Spray of Ta-Ag Composites: Correlation Between Microstructure and Antibacterial Properties

Properties of Novel Partially Amorphous Fe-Based Thermal Barrier Coatings under the Influence of Cryogenic Temperature and Hydrogen

M. Hauer; L. Möhrke; P. Biswal; O. Brätz; A. Gericke; B. Allebrodt; K.-M. Henkel

ITSC 2024; 204-212https://doi.org/10.31399/asm.cp.itsc2024p0204

View Articletitled, Properties of Novel Partially Amorphous Fe-Based Thermal Barrier Coatings under the Influence of Cryogenic Temperature and Hydrogen

Refurbishment Process of Platform Combustion System of SGT5-8000H

Bernd Burbaum; Ingo Just; Wilfried Remmert; Matthias Gralki

ITSC 2024; 213-220https://doi.org/10.31399/asm.cp.itsc2024p0213

View Articletitled, Refurbishment Process of Platform Combustion System of SGT5-8000H

Air Plasma-Sprayed MCrAlY Coatings with Low Oxide Content Enabled by Adding a Deoxidizer

Yong-Sheng Zhu; Xuan Xue; Xiao-Tao Luo; Chang-Jiu Li

ITSC 2024; 221-227https://doi.org/10.31399/asm.cp.itsc2024p0221

View Articletitled, Air Plasma-Sprayed MCrAlY Coatings with Low Oxide Content Enabled by Adding a Deoxidizer

Hot Corrosion Behavior of Yttria Stabilized Zirconia and La₂Ce₂C₇ Based Dual Coatings

Amirhossein Pakseresht; Ariharan Suyambulingam; Anusha Sekar; Milan Parchovianský

ITSC 2024; 228-232https://doi.org/10.31399/asm.cp.itsc2024p0228

View Articletitled, Hot Corrosion Behavior of Yttria Stabilized Zirconia and La<sub>2</sub>Ce<sub>2</sub>C<sub>7</sub> Based Dual Coatings

Data-Driven Mitigation of Process Fluctuations in Wire-Arc Spraying

K. Bobzin; H. Heinemann; L. M. Johann

ITSC 2024; 233-239https://doi.org/10.31399/asm.cp.itsc2024p0233

View Articletitled, Data-Driven Mitigation of Process Fluctuations in Wire-Arc Spraying

In-Field Repair for Maritime Hardware Using High-Pressure Cold Spray

Helmut P. Höll; Kris Klus; Aaron T. Nardi; Rose M. Gerani; Dan Stanley; Tim J. Eden

ITSC 2024; 240-247https://doi.org/10.31399/asm.cp.itsc2024p0240

View Articletitled, In-Field Repair for Maritime Hardware Using High-Pressure Cold Spray

Cavitation Erosion in HVOF Thermally Sprayed WC-NiCrBSi Coatings

Ahmed Algoburi; Rehan Ahmed; Vishakh Kumar

ITSC 2024; 248-255https://doi.org/10.31399/asm.cp.itsc2024p0248

View Articletitled, Cavitation Erosion in HVOF Thermally Sprayed WC-NiCrBSi Coatings

Laser Cladding

Comparative Studies of SUS316L Layer Deposited by Conventional Laser Cladding and Extreme High Speed Laser Cladding

T. Izumi; A. Yano; M. Arai

ITSC 2024; 27-33https://doi.org/10.31399/asm.cp.itsc2024p0027

View Articletitled, Comparative Studies of SUS316L Layer Deposited by Conventional Laser Cladding and Extreme High Speed Laser Cladding

Investigations on Laser Cladding of Tin-Bronze on Steel

Hannes Freisse; Emilie Isère; Timo Schudeleit; Francesco Rippa; Dominik Keller

ITSC 2024; 108-113https://doi.org/10.31399/asm.cp.itsc2024p0108

View Articletitled, Investigations on Laser Cladding of Tin-Bronze on Steel

COAXquattro: A Versatile High-Power Multi-Wire Laser Cladding Technology

Filofteia-Laura Toma; Holger Hillig; Marc Kaubisch; Irina Shakhverdova; Marko Seifert; Frank Brückner

ITSC 2024; 114-122https://doi.org/10.31399/asm.cp.itsc2024p0114

View Articletitled, COAXquattro: A Versatile High-Power Multi-Wire Laser Cladding Technology

Young Professionals

Subsurface Weave Pattern Influences on Cold Spray Deposits onto Woven Fiber Reinforced Composites

Madison Kaminskyj; Nicholas Mennie; Nand Singh; Behrad Koohbor; Francis M. Haas

ITSC 2024; 40-48https://doi.org/10.31399/asm.cp.itsc2024p0040

View Articletitled, Subsurface Weave Pattern Influences on Cold Spray Deposits onto Woven Fiber Reinforced Composites

Techno-Economic Assessment of Utilization of Cold Spraying Process for Fabrication of Resistive Heating Elements for Temperature Protection of Steel Pipes

M. Rezvani Rad; P. Menghesha; M. O. Jarligo; A. McDonald

ITSC 2024; 49-58https://doi.org/10.31399/asm.cp.itsc2024p0049

View Articletitled, Techno-Economic Assessment of Utilization of Cold Spraying Process for Fabrication of Resistive Heating Elements for Temperature Protection of Steel Pipes

Soilless Cultivation via Thermal Spraying

P. Biswal; M. Hauer; L. Möhrke; A. Gericke; S. Rasche; H. Schinkel; Knuth-Michael Henkel

ITSC 2024; 59-66https://doi.org/10.31399/asm.cp.itsc2024p0059

View Articletitled, Soilless Cultivation via Thermal Spraying

Calibration of the Critical Velocity in Cold Gas Spraying

L. Wiehler; J. Capan; Z. Arabgol; C. Huang; A. List; F. Gärtner; T. Klassen

ITSC 2024; 67-73https://doi.org/10.31399/asm.cp.itsc2024p0067

View Articletitled, Calibration of the Critical Velocity in Cold Gas Spraying

Modelling and Simulation

Understanding the Effect of Mo Concentration on the Strength of AlCoCrFeMo High-Entropy Alloy Using Atomistic Simulations

Nashit Jalal; Maria Ophelia Jarligo; André McDonald; Wylie Stroberg

ITSC 2024; 100-107https://doi.org/10.31399/asm.cp.itsc2024p0100

View Articletitled, Understanding the Effect of Mo Concentration on the Strength of AlCoCrFeMo High-Entropy Alloy Using Atomistic Simulations

Repair and Recycling

Trajectory Optimization for Repair by Robot-Guided Cold Spray

Marcel Lewke; Hongjian Wu; Alexander List; Frank Gärtner; Thomas Klassen; Alexander Fay

ITSC 2024; 123-129https://doi.org/10.31399/asm.cp.itsc2024p0123

View Articletitled, Trajectory Optimization for Repair by Robot-Guided Cold Spray

Numerical Simulation of the Shaft Parts Repairing Process by Laser Metal Deposition Technique

Yuxian Meng; Masayuki Arai; Taisei Izumi

ITSC 2024; 130-137https://doi.org/10.31399/asm.cp.itsc2024p0130

View Articletitled, Numerical Simulation of the Shaft Parts Repairing Process by Laser Metal Deposition Technique

Characterization and Testing Methods

Exploring the Crack Propagation Behavior in Suspension Plasma Sprayed Thermal Barrier Coatings: An In-Situ Three-point Bending Study in Scanning Electron Microscope

Mohamed Amer; Nicholas Curry; Muhammad Arshad; Qamar Hayat; Vit Janik; Jon Nottingham; Mingwen Bai

ITSC 2024; 139-151https://doi.org/10.31399/asm.cp.itsc2024p0139

View Articletitled, Exploring the Crack Propagation Behavior in Suspension Plasma Sprayed Thermal Barrier Coatings: An In-Situ Three-point Bending Study in Scanning Electron Microscope

Performance of Thermally Sprayed Inconel Coatings in Erosion-Corrosion Conditions of Biomass-Fired Boilers

Rajan Verma; Gagandeep Kaushal

ITSC 2024; 152-158https://doi.org/10.31399/asm.cp.itsc2024p0152

View Articletitled, Performance of Thermally Sprayed Inconel Coatings in Erosion-Corrosion Conditions of Biomass-Fired Boilers

The Influence of Incursion Rate on Abradability of AlSi-hBN Abradable Seal Coating

Tong Liu; Jianming Liu; Deming Zhang; Yubai Hou

ITSC 2024; 159-165https://doi.org/10.31399/asm.cp.itsc2024p0159

View Articletitled, The Influence of Incursion Rate on Abradability of AlSi-hBN Abradable Seal Coating

Fast and Non-Destructive Mechanical Characterization of Coatings from Thermal Spraying and Laser Cladding: Automated Surface Acoustic Wave Spectroscopy as a New Tool for Quality Control and Research

Martin Zawischa; Stefan Makowski

ITSC 2024; 427-436https://doi.org/10.31399/asm.cp.itsc2024p0427

View Articletitled, Fast and Non-Destructive Mechanical Characterization of Coatings from Thermal Spraying and Laser Cladding: Automated Surface Acoustic Wave Spectroscopy as a New Tool for Quality Control and Research

Characterizing Deformation by Positron Annihilation Spectroscopy: Cold Spray vs. High-Pressure Torsion

Jan Cizek; Jan Medricky; Filip Stefanik; Frantisek Lukac; Oksana Melikhova; Jakub Cizek

ITSC 2024; 437-443https://doi.org/10.31399/asm.cp.itsc2024p0437

View Articletitled, Characterizing Deformation by Positron Annihilation Spectroscopy: Cold Spray vs. High-Pressure Torsion

A Micro-Spectroscopic Approach to Characterizing Residual Stresses and Subsurface Modifications Due to High-Speed Collision During Cold Spray Deposition of Metals on Glass Substrates

Ali K. Elkholey; Dominique De Ligny; Rija Nirina Raoelison; Christophe Verdy; Pierre Bertrand; Cecile Langlade

ITSC 2024; 444-451https://doi.org/10.31399/asm.cp.itsc2024p0444

View Articletitled, A Micro-Spectroscopic Approach to Characterizing Residual Stresses and Subsurface Modifications Due to High-Speed Collision During Cold Spray Deposition of Metals on Glass Substrates

Ceramic Coatings

Understanding the Formation of Different Surface Structures of Hydrophobic Ceramic Coatings Deposited in the SPAPS Process and SPVPS Process

Pengyun Xu; Xiaomu Sui; Thomas W. Coyle; Larry Pershin; Javad Mostaghimi

ITSC 2024; 166-175https://doi.org/10.31399/asm.cp.itsc2024p0166

View Articletitled, Understanding the Formation of Different Surface Structures of Hydrophobic Ceramic Coatings Deposited in the SPAPS Process and SPVPS Process

Development and Understanding of CMAS Coating on YSZ Using APS Technique

Amit Roy; Fadhel Ben Ettouil; Rogerio S. Lima; Christian Moreau

ITSC 2024; 176-184https://doi.org/10.31399/asm.cp.itsc2024p0176

View Articletitled, Development and Understanding of CMAS Coating on YSZ Using APS Technique

Corrosion Protection

Comparative Analysis of Cold Sprayed and HVOF Sprayed NiCrTiCRe Coating on T22 Boiler Steel in Thermal Power Plant Boiler Environment

Niraj Bala; Harpreet Singh; Satya Prakash

ITSC 2024; 185-193https://doi.org/10.31399/asm.cp.itsc2024p0185

View Articletitled, Comparative Analysis of Cold Sprayed and HVOF Sprayed NiCrTiCRe Coating on T22 Boiler Steel in Thermal Power Plant Boiler Environment

Investigation on Oxidation and Interdiffusion in the Systems of Aluminiferous Coatings and Superalloys

Xiaoyu Sun; Johan Moverare; Xin-Hai Li; Ru Lin Peng

ITSC 2024; 382-385https://doi.org/10.31399/asm.cp.itsc2024p0382

View Articletitled, Investigation on Oxidation and Interdiffusion in the Systems of Aluminiferous Coatings and Superalloys

Tribology Behavior of HVAF and HVOF Sprayed WC-CoCr Coatings on Light Alloys

Tunji Owoseni; Mohit Gupta; Ingmar Mare; Tommi Varis

ITSC 2024; 386-397https://doi.org/10.31399/asm.cp.itsc2024p0386

View Articletitled, Tribology Behavior of HVAF and HVOF Sprayed WC-CoCr Coatings on Light Alloys

Thermal Spray Process Overviews

Plasma Spraying—From Single to Multiple Electrodes

Georg Mauer

ITSC 2024; 194https://doi.org/10.31399/asm.cp.itsc2024p0194

View Articletitled, Plasma Spraying—From Single to Multiple Electrodes

Cold Spraying

Frank Gärtner

ITSC 2024; 196https://doi.org/10.31399/asm.cp.itsc2024p0196

View Articletitled, Cold Spraying

Isolating Coatings

Enhanced Coating Deposition by Development of Oxide Shelled Aluminium Nitride

K. Bobzin; H. Heinemann; E. Olesch; A. Aslankaya

ITSC 2024; 197-203https://doi.org/10.31399/asm.cp.itsc2024p0197

View Articletitled, Enhanced Coating Deposition by Development of Oxide Shelled Aluminium Nitride

New Processes

Influence of Substrate Patterns on the Coating Microstructure in Aerosol-Deposited Alumina Coatings

Zhenying Yang; Ali Dolatabadi; Thomas W. Coyle

ITSC 2024; 257-265https://doi.org/10.31399/asm.cp.itsc2024p0257

View Articletitled, Influence of Substrate Patterns on the Coating Microstructure in Aerosol-Deposited Alumina Coatings

In-Situ SEM Observation of Mechanical Failure of Hybrid Plasma Spray Coatings

Radek Musalek; Tomas Tesar; Jakub Minarik; Romain Genois; Jonas Dudik

ITSC 2024; 266-277https://doi.org/10.31399/asm.cp.itsc2024p0266

View Articletitled, In-Situ SEM Observation of Mechanical Failure of Hybrid Plasma Spray Coatings

A New Approach for the Application of Highly Reactive Metals

M. Rodriguez Diaz; M. Szafarska; René Gustus; K. Möhwald; H. J. Maier

ITSC 2024; 278-283https://doi.org/10.31399/asm.cp.itsc2024p0278

View Articletitled, A New Approach for the Application of Highly Reactive Metals

HVOF/HVAF-Spraying

Gas-Fuel HVOF and Its Influencing Factors: Introducing the Total Gas Flow

Carina Hambrock; Wolfgang Rannetbauer; Simon Hubmer; Ronny Ramlau

ITSC 2024; 284-290https://doi.org/10.31399/asm.cp.itsc2024p0284

View Articletitled, Gas-Fuel HVOF and Its Influencing Factors: Introducing the Total Gas Flow

Highly Porous Titanium Coatings for Proton Exchange Membrane Water Electrolysis Application by HVOF

Kirsten Bobzin; Lidong Zhao; Hendrik Heinemann; Elisa Olesch

ITSC 2024; 291-297https://doi.org/10.31399/asm.cp.itsc2024p0291

View Articletitled, Highly Porous Titanium Coatings for Proton Exchange Membrane Water Electrolysis Application by HVOF

Suspension Spraying

Physical Mechanisms in Plasma Spray Processing of Suspensions

A. Chergui; C. Lebot; V. Rat; G. Mariaux; A. Denoirjean

ITSC 2024; 298-309https://doi.org/10.31399/asm.cp.itsc2024p0298

View Articletitled, Physical Mechanisms in Plasma Spray Processing of Suspensions

Parameters Influencing the Photocatalytic Activity of Suspension Sprayed ZnO-TiO₂ Coatings

A. Meyer; F.-L. Toma; O. Kunze; A. Potthoff; C. Leyens

ITSC 2024; 310-318https://doi.org/10.31399/asm.cp.itsc2024p0310

View Articletitled, Parameters Influencing the Photocatalytic Activity of Suspension Sprayed ZnO-TiO<sub>2</sub> Coatings

Gas and Fuel Industry

An Optical and Metallurgical Comparison of Chrome Free and Chrome Containing Al-Si Slurry Diffusion Coatings for Gas Turbine Applications

Sarah Higgins; Thomas D.A. Jones; Qi Zhao

ITSC 2024; 319-324https://doi.org/10.31399/asm.cp.itsc2024p0319

View Articletitled, An Optical and Metallurgical Comparison of Chrome Free and Chrome Containing Al-Si Slurry Diffusion Coatings for Gas Turbine Applications

Study the Impact of Process Parameters of Laser Cladding Nickel-Chromium Alloy Powder on Substrate Melted Areas

Rakan A. Ahmed; Raja S. Khan; Mohammed M. Qahtani; Abduljabar Alsayoud; Abdulhameed S. Bukhari

ITSC 2024; 325-335https://doi.org/10.31399/asm.cp.itsc2024p0325

View Articletitled, Study the Impact of Process Parameters of Laser Cladding Nickel-Chromium Alloy Powder on Substrate Melted Areas

Pre- and Post-Treatment

Influence of Laser Fusing Parameters on the Microstructure Evolution of Thermally Sprayed Self-Fluxing NiCrBSiFe Coatings

B. Preuß; T. Lindner; G. Töberling; S. Kaur; T. Lampke

ITSC 2024; 336-342https://doi.org/10.31399/asm.cp.itsc2024p0336

View Articletitled, Influence of Laser Fusing Parameters on the Microstructure Evolution of Thermally Sprayed Self-Fluxing NiCrBSiFe Coatings

Effect of Surface Preparation by Laser Texturing in Thermal Spraying on the Fatigue Life of the Ti-6Al-4V Alloy

Pegane-Vingadas Eléonore; Chaussumier Michel; Soveja Adriana; Costil Sophie

ITSC 2024; 343-355https://doi.org/10.31399/asm.cp.itsc2024p0343

View Articletitled, Effect of Surface Preparation by Laser Texturing in Thermal Spraying on the Fatigue Life of the Ti-6Al-4V Alloy

Improved Adhesion of Plasma-Sprayed Ceramic Coatings on Textured Ceramic Substrates

T. Ferrasse; S. Costil; G. Darut; B. Bouteiller; M. C. Auscher

ITSC 2024; 356-364https://doi.org/10.31399/asm.cp.itsc2024p0356

View Articletitled, Improved Adhesion of Plasma-Sprayed Ceramic Coatings on Textured Ceramic Substrates

Functional Coatings

Comparative Analysis of Mechanical Properties of Thermally Sprayed Cu and Zn Coatings on Fiber-Reinforced Plastic for Enhanced EMC Applications

Jana Gebauer; Stefan Scheitz; Christiane Rothe; Alexander Paul; Pirabagini Kanagarajah; Manuel Reif

ITSC 2024; 365-375https://doi.org/10.31399/asm.cp.itsc2024p0365

View Articletitled, Comparative Analysis of Mechanical Properties of Thermally Sprayed Cu and Zn Coatings on Fiber-Reinforced Plastic for Enhanced EMC Applications

Microstructure Evolution and Oxidation Behavior of Thermal Barrier Coatings with Varying Cold Sprayed Bond Coats after Isothermal Heat Treatments

Sergi Dosta; Carlos R. C. Lima; Victor Crespo; Jaume Nin; Genis Clavé

ITSC 2024; 376-381https://doi.org/10.31399/asm.cp.itsc2024p0376

View Articletitled, Microstructure Evolution and Oxidation Behavior of Thermal Barrier Coatings with Varying Cold Sprayed Bond Coats after Isothermal Heat Treatments

Metals Processing

Optimization of the Ni-Coating Geometry and Microstructure of Large Surfaces by Laser Cladding on Cast-Iron Molds Used in Glass Industry

F. Bourahima; T. Lauridant; C. Guasch; Thierry Baudin; Anne-Laure Helbert

ITSC 2024; 399-408https://doi.org/10.31399/asm.cp.itsc2024p0399

View Articletitled, Optimization of the Ni-Coating Geometry and Microstructure of Large Surfaces by Laser Cladding on Cast-Iron Molds Used in Glass Industry

High-Speed Laser Melt Injection for Reinforcing Skin-Pass Rolls

P. Warneke; A. Bohlen; T. Seefeld

ITSC 2024; 409-417https://doi.org/10.31399/asm.cp.itsc2024p0409

View Articletitled, High-Speed Laser Melt Injection for Reinforcing Skin-Pass Rolls

Cold Spray

Comprehensive Characterization of Annealed Coatings: Investigating Roughness and Wear Performance through Wear Testing and Analysis

Nazanin Sheibanian; Raffaella Sesana; Sedat Özbilen; Rocco Lupoi

ITSC 2024; 418-426https://doi.org/10.31399/asm.cp.itsc2024p0418

View Articletitled, Comprehensive Characterization of Annealed Coatings: Investigating Roughness and Wear Performance through Wear Testing and Analysis

Evaluation of Lightning Resistance Property of Thermoplastic CFRP Metallized by Low-Pressure Cold Spray

H. Saito; W. Kai; T. Funaki; Y. Ichikawa; K. Ogawa

ITSC 2024; 521-527https://doi.org/10.31399/asm.cp.itsc2024p0521

View Articletitled, Evaluation of Lightning Resistance Property of Thermoplastic CFRP Metallized by Low-Pressure Cold Spray

Studies of Particle Deformation and Microstructure Evolution Using High Strain Rate Particle Compression Test

Gil Ju Na; Arata Hashizume; Qi Tang; Mostafa Hassani; Yuji Ichikawa

ITSC 2024; 528-534https://doi.org/10.31399/asm.cp.itsc2024p0528

View Articletitled, Studies of Particle Deformation and Microstructure Evolution Using High Strain Rate Particle Compression Test

Data Driven Models and Artificial Intelligence

Physics-Informed Neural Networks for Predicting Particle Properties in Plasma Spraying

K. Bobzin; H. Heinemann; A. Dokhanchi

ITSC 2024; 452-458https://doi.org/10.31399/asm.cp.itsc2024p0452

View Articletitled, Physics-Informed Neural Networks for Predicting Particle Properties in Plasma Spraying

Databased Optimization of Coating Characteristics—Challenges and Possible Solution

Wolfgang Rannetbauer; Carina Hambrock; Simon Hubmer; Ronny Ramlau

ITSC 2024; 459-468https://doi.org/10.31399/asm.cp.itsc2024p0459

View Articletitled, Databased Optimization of Coating Characteristics—Challenges and Possible Solution

Additive Manufacturing

Towards an Integrated Modular Cold Spray Additive Manufacturing System

Wenbo Li; Hongjian Wu; Shaowu Liu; Hanlin Liao; Sophie Costil; Sihao Deng

ITSC 2024; 469-482https://doi.org/10.31399/asm.cp.itsc2024p0469

View Articletitled, Towards an Integrated Modular Cold Spray Additive Manufacturing System

An Investigation on the Effect of Deposition Technique on Micro-Structural and Mechanical Properties of WC-17Co Deposited Using Direct Energy Deposition (DED) and High-Velocity Oxygen Fuel (HVOF)

Theresa Grabowski; Fardad Azarmi; Martin McDonnell

ITSC 2024; 483-494https://doi.org/10.31399/asm.cp.itsc2024p0483

View Articletitled, An Investigation on the Effect of Deposition Technique on Micro-Structural and Mechanical Properties of WC-17Co Deposited Using Direct Energy Deposition (DED) and High-Velocity Oxygen Fuel (HVOF)

From Anticosti Island's ‘Deep Time’ to A Cold Spray Additive Manufacturing Art Creation

A. Nastic; B. Jodoin; C. Fitzgerald; S. Desaulniers; L. Pouliot; F. Caio; D. Macdonald; A. Duval; G. Dubois; V. Tessier; C. Etienne

ITSC 2024; 495-507https://doi.org/10.31399/asm.cp.itsc2024p0495

View Articletitled, From Anticosti Island's ‘Deep Time’ to A Cold Spray Additive Manufacturing Art Creation

Experimental and Numerical Study of the Spattering Dynamic Mechanisms in Selective Laser Melting

Shaocong Qin; Wenyou Zhang; Shuo Yin; Shenghui Lei

ITSC 2024; 508-513https://doi.org/10.31399/asm.cp.itsc2024p0508

View Articletitled, Experimental and Numerical Study of the Spattering Dynamic Mechanisms in Selective Laser Melting

The Effect of Powder Particle Size on Mechanical and Fracture Properties of Cold Sprayed Al

O. Kovarik; F. Wick; L. Wiehler; C. Huang; J. Cizek; A. List; F. Gärtner; T. Klassen

ITSC 2024; 514-519https://doi.org/10.31399/asm.cp.itsc2024p0514

View Articletitled, The Effect of Powder Particle Size on Mechanical and Fracture Properties of Cold Sprayed Al

Powders, Wires, Suspensions

Plasma-Sprayed Bulk-Like Ni-Based Alloy Coating Enabled by Boron-Containing Powder Design with Exceptional High Tensile Strength

Chang-Jiu Li; Xin-Yuan Dong; Jiu-Jing Song; Yong-Sheng Zhu; Xiao-Tao Luo; Li Zhang

ITSC 2024; 536-542https://doi.org/10.31399/asm.cp.itsc2024p0536

View Articletitled, Plasma-Sprayed Bulk-Like Ni-Based Alloy Coating Enabled by Boron-Containing Powder Design with Exceptional High Tensile Strength

Process Diagnostics, Sensors and Controls

Offline Robot Programming for Generating Coating Paths Quickly and Accurately

Stephan Schneebeli; D.A. Karandikar

ITSC 2024; 543-548https://doi.org/10.31399/asm.cp.itsc2024p0543

View Articletitled, Offline Robot Programming for Generating Coating Paths Quickly and Accurately

Opportunities and Limitations of a Holistic Process Monitoring System for Arc Processes

Sebastian Weis; Stefan Brumm; Robin Grunert; Manuel Halmaghi; Jan Morgenschweis; Jürgen Bosler

ITSC 2024; 549-556https://doi.org/10.31399/asm.cp.itsc2024p0549

View Articletitled, Opportunities and Limitations of a Holistic Process Monitoring System for Arc Processes

In Situ Spray Bead Acquisition and Analysis for Coating Thickness Predictions

Uroš Hudomalj; Ivo Aschwanden; Lukas Weiss; Majid Nabavi; Konrad Wegener

ITSC 2024; 623-631https://doi.org/10.31399/asm.cp.itsc2024p0623

View Articletitled, In Situ Spray Bead Acquisition and Analysis for Coating Thickness Predictions

Tribological Coatings

A Comparative Investigation of Feedstock Materials on Multiple Properties of HVOF-Formed Cr₃C₂-NiCr Coatings: Size Effects of Powders and Carbides on Sliding Abrasive Wear Behavior

Xinqing Ma; Peter Ruggerio

ITSC 2024; 558-569https://doi.org/10.31399/asm.cp.itsc2024p0558

View Articletitled, A Comparative Investigation of Feedstock Materials on Multiple Properties of HVOF-Formed Cr<sub>3</sub>C<sub>2</sub>-NiCr Coatings: Size Effects of Powders and Carbides on Sliding Abrasive Wear Behavior

Hard-Facing Coatings for Agriculture Tools

L. Möhrke; M. Hauer; P. Biswal; A. Gericke; Knuth-Michael Henkel

ITSC 2024; 570-579https://doi.org/10.31399/asm.cp.itsc2024p0570

View Articletitled, Hard-Facing Coatings for Agriculture Tools

Dynamic Impact Wear Behavior of HVOF Sprayed Hardmetal Coatings

Š. Houdková; J. Duliškovič; M. Vostřák; T. Taranda; O. Skála; R. Musilová; J. Daniel; L.-M. Berger

ITSC 2024; 580-593https://doi.org/10.31399/asm.cp.itsc2024p0580

View Articletitled, Dynamic Impact Wear Behavior of HVOF Sprayed Hardmetal Coatings

Tribology of Self-Fluxing Ceramic Coatings Prepared Using External Feeding Hybrid Plasma Spraying

Tomas Tesar; Radek Musalek; Frantisek Lukac; Jan Walter; Ladislav Cvrcek; Jaroslav Cech

ITSC 2024; 611-616https://doi.org/10.31399/asm.cp.itsc2024p0611

View Articletitled, Tribology of Self-Fluxing Ceramic Coatings Prepared Using External Feeding Hybrid Plasma Spraying

The Performance of Metal Based Abradable Sealing Coatings Based on Peeling Medium Particle Structure Design

Dan Guo; Jianming Liu; Tong Liu; Chao Wu

ITSC 2024; 617-622https://doi.org/10.31399/asm.cp.itsc2024p0617

View Articletitled, The Performance of Metal Based Abradable Sealing Coatings Based on Peeling Medium Particle Structure Design

Metal Coatings

Enhancing the Optimized HEA Bond Coating in TBC Systems via HVAF Technique

Hossein Shahbazi; Rogerio S. Lima; Pantcho Stoyanov; Christian Moreau

ITSC 2024; 594-610https://doi.org/10.31399/asm.cp.itsc2024p0594

View Articletitled, Enhancing the Optimized HEA Bond Coating in TBC Systems via HVAF Technique

Poster Session

Analysis of Different High-Velocity Thermally Sprayed Coatings to Recover AISI H13 High-Pressure Die-Casting Molds

Andre R. Mayer; Eriel B. Sabino; Hipolito D. C. Fals; Anderson G.M. Pukasiewicz; Willian R. de Oliveira; Stefan Björklund; Shrikant Joshi

ITSC 2024; 632-642https://doi.org/10.31399/asm.cp.itsc2024p0632

View Articletitled, Analysis of Different High-Velocity Thermally Sprayed Coatings to Recover AISI H13 High-Pressure Die-Casting Molds

Deposition and Characterization of Thermally Sprayed Metallic Coatings onto Polymer Reinforced Carbon Fiber Composites

Dilkaram S. Ghuman; Marie-Laurence Cliche; Bruno C. N. M. de Castilho; Fadhel B. Ettouil; Christian Moreau; Chunzou Pan; Pantcho Stoyanov

ITSC 2024; 643-651https://doi.org/10.31399/asm.cp.itsc2024p0643

View Articletitled, Deposition and Characterization of Thermally Sprayed Metallic Coatings onto Polymer Reinforced Carbon Fiber Composites

Fluid Velocity Sensors Made by Thermal Spray

Andre Hanna; Sanjeev Chandra

ITSC 2024; 652-659https://doi.org/10.31399/asm.cp.itsc2024p0652

View Articletitled, Fluid Velocity Sensors Made by Thermal Spray

Mold-Resistant Air Filters Embedded with Copper Particles

L. Pershin; S. Delage; M. Zhang; M. Ringuette; J. Mostaghimi

ITSC 2024; 660-662https://doi.org/10.31399/asm.cp.itsc2024p0660

View Articletitled, Mold-Resistant Air Filters Embedded with Copper Particles

Antibacterial Surface Coatings by Plasma Spray (APS/SPS) and Physical Vapor Deposition (PVD) Processes: A Comparative Approach

Laurène Youssef; Audrey Prorot; Laurène Gnodé; Thibault Maerten; Simon Belvèze; Canet Acikgoz; Noora Manninen; Vincent Rat; Armelle Vardelle; A. Denoirjean

ITSC 2024; 663-669https://doi.org/10.31399/asm.cp.itsc2024p0663

View Articletitled, Antibacterial Surface Coatings by Plasma Spray (APS/SPS) and Physical Vapor Deposition (PVD) Processes: A Comparative Approach

Improvements in Cavitation and Slurry Wear Erosion of Inconel 718 Laser Cladding through the NiNb Addition

Hipolito D. C. Fals; Simone R.F. Sabino; Anderson G.M. Pukasiewicz; Jeferson T. Pacheco; Marcelo T. Veiga

ITSC 2024; 670-680https://doi.org/10.31399/asm.cp.itsc2024p0670

View Articletitled, Improvements in Cavitation and Slurry Wear Erosion of Inconel 718 Laser Cladding through the NiNb Addition

Visual Odometry for Mobile Material Deposition Systems Using RGB-D Cameras

Hadis Saadati Nezhad; Marcelo Contreras; André McDonald; Ehsan Hashemi

ITSC 2024; 681-688https://doi.org/10.31399/asm.cp.itsc2024p0681

View Articletitled, Visual Odometry for Mobile Material Deposition Systems Using RGB-D Cameras

Understanding the Impact of Binary Plasma Gas Mixtures in Plasma Spraying

K. Bobzin; H. Heinemann; M. Erck; K. Jasutyn

ITSC 2024; 689-695https://doi.org/10.31399/asm.cp.itsc2024p0689

View Articletitled, Understanding the Impact of Binary Plasma Gas Mixtures in Plasma Spraying

Effect of the Test Method on the Resulting Adhesion of the Coating

Žaneta Dlouhá; Lucie Jarolímová; Sofia Bejblíková; Tomáš Taranda

ITSC 2024; 696-703https://doi.org/10.31399/asm.cp.itsc2024p0696

View Articletitled, Effect of the Test Method on the Resulting Adhesion of the Coating

Design and Development of Cost-Effective Equipment for Tribological Evaluation of Thermally Sprayed Abradable Coatings

K. Bertuol; F. R. E. Rivadeneira; B. C. N. M. Castilho; C. Moreau; P. Stoyanov

ITSC 2024; 704-711https://doi.org/10.31399/asm.cp.itsc2024p0704

View Articletitled, Design and Development of Cost-Effective Equipment for Tribological Evaluation of Thermally Sprayed Abradable Coatings

Investigation of Mechanical Properties of Cobalt Chromium Additively Manufactured Using Direct Energy Deposition: Experimental Study and Finite Element Analysis

David Smith; Paula Pickett; Theresa Grabowski; Joncy Thorpe; Fardad Azarmi

ITSC 2024; 712-723https://doi.org/10.31399/asm.cp.itsc2024p0712

View Articletitled, Investigation of Mechanical Properties of Cobalt Chromium Additively Manufactured Using Direct Energy Deposition: Experimental Study and Finite Element Analysis

Heat Treatment Effects on Structural and Mechanical Features of Cold Sprayed 3D Aluminium Part

Mohamed Sokore; Sihao Deng; Hanlin Liao; Rija Nirina Raoelison

ITSC 2024; 724-731https://doi.org/10.31399/asm.cp.itsc2024p0724

View Articletitled, Heat Treatment Effects on Structural and Mechanical Features of Cold Sprayed 3D Aluminium Part

Cold-Sprayed Aluminum Alloys: Exploring the Differences Between 6061 and 7075

K. Rafiee; E. Barbosa de Melo; P. Vo; M.H. Martin; S. Yue

ITSC 2024; 732-742https://doi.org/10.31399/asm.cp.itsc2024p0732

View Articletitled, Cold-Sprayed Aluminum Alloys: Exploring the Differences Between 6061 and 7075

Investigation of the Pore Formation during the Cold Spray Additive Manufacturing of a Bulk Aluminum Part

Mohamed Sokore; Sihao Deng; Hanlin Liao; Rija Nirina Raoelison

ITSC 2024; 743-750https://doi.org/10.31399/asm.cp.itsc2024p0743

View Articletitled, Investigation of the Pore Formation during the Cold Spray Additive Manufacturing of a Bulk Aluminum Part

Nozzle Geometry Optimization for Cold Spray Applications by Using 3D-CFD Calculations

J. Gutiérrez de Frutos; A. List; F. Gärtner; T. Klassen

ITSC 2024; 751-758https://doi.org/10.31399/asm.cp.itsc2024p0751

View Articletitled, Nozzle Geometry Optimization for Cold Spray Applications by Using 3D-CFD Calculations

Influence of Concentrated Solar Power on Plasma Sprayed Hybrid Thermal Barrier Coatings

Jonas Dudik; losif Hulka; Tomas Tesar; Frantisek Lukac; Radek Musalek

ITSC 2024; 759-767https://doi.org/10.31399/asm.cp.itsc2024p0759

View Articletitled, Influence of Concentrated Solar Power on Plasma Sprayed Hybrid Thermal Barrier Coatings

Lightblast Laser Ablation Technology

Thomas Wanski; Patrick Herwig; Jan Hauptmann

ITSC 2024; 768-772https://doi.org/10.31399/asm.cp.itsc2024p0768

View Articletitled, Lightblast Laser Ablation Technology

Volume Information

Authors and Co-Authors

ITSC 2024; 773-782https://doi.org/10.31399/asm.cp.itsc2024fm02

View Articletitled, Authors and Co-Authors

Preface

ITSC 2024; iiihttps://doi.org/10.31399/asm.cp.itsc2024fm01

View Articletitled, Preface