Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2023: Proceedings from the International Thermal Spray Conference

AI, Machine Learning, Materials and Process Informatics, Modeling and Simulations, LCAs

Influence of Surface Geometry and Microstructural Features on the Delamination and Crack Propagation of Brittle Convex Thermal Barrier Films during Thermal Cyclic Loading

Aleksandra Nastic; Larry Pershin; Javad Mostaghimi

ITSC 2023; 1-8https://doi.org/10.31399/asm.cp.itsc2023p0001

View Articletitled, Influence of Surface Geometry and Microstructural Features on the Delamination and Crack Propagation of Brittle Convex Thermal Barrier Films during Thermal Cyclic Loading

Case Study on the Application of Microstructural Features Extracted by Convolutional Neural Network for Cold Spray of Aluminum Alloys

Siyu Tu; Phuong Vo

ITSC 2023; 9-14https://doi.org/10.31399/asm.cp.itsc2023p0009

View Articletitled, Case Study on the Application of Microstructural Features Extracted by Convolutional Neural Network for Cold Spray of Aluminum Alloys

Data-Driven Overlapping Track Profile Modelling in Cold Spray Additive Manufacturing

Daiki Ikeuchi; Alejandro Vargas-Uscategui; Peter C. King; Xiaofeng Wu

ITSC 2023; 15-21https://doi.org/10.31399/asm.cp.itsc2023p0015

View Articletitled, Data-Driven Overlapping Track Profile Modelling in Cold Spray Additive Manufacturing

Visual Navigation for Autonomous Mobile Material Deposition Systems using Remote Sensing

S. Maleki; A. McDonald; E. Hashemi

ITSC 2023; 22-29https://doi.org/10.31399/asm.cp.itsc2023p0022

View Articletitled, Visual Navigation for Autonomous Mobile Material Deposition Systems using Remote Sensing

Phase Field Modelling of Microstructure Evolution of Cold-Sprayed Ni-Ti Composite upon Post-Spray Heat Treatment

R. Nikbakht; H. Assadi

ITSC 2023; 30-37https://doi.org/10.31399/asm.cp.itsc2023p0030

View Articletitled, Phase Field Modelling of Microstructure Evolution of Cold-Sprayed Ni-Ti Composite upon Post-Spray Heat Treatment

Application of Machine Learning for Optimization of HVOF Process Parameters

Daniel Gerner; Fardad Azarmi; Martin McDonnell; Uchechi Okeke

ITSC 2023; 38-45https://doi.org/10.31399/asm.cp.itsc2023p0038

View Articletitled, Application of Machine Learning for Optimization of HVOF Process Parameters

Aircraft and Engine Structural Components Coatings

Microstructural, Mechanical, and Tribological Evaluation of CuAl-Based Coatings Deposited by APS and HVOF

C. Bidmeshki; A. C. Liberati; A. Roy; F. Ben Ettouil; C. Moreau; A. I. Encalada; S. A. Alidokht; R. R. Chromik; P. Stoyanov

ITSC 2023; 46-53https://doi.org/10.31399/asm.cp.itsc2023p0046

View Articletitled, Microstructural, Mechanical, and Tribological Evaluation of CuAl-Based Coatings Deposited by APS and HVOF

Antimicrobial Coatings

A Novel Antibacterial and Biocompatible Ta-Ag Coating Fabricated by Cold Spray Technology

Pengfei Yu; Shuo Yin; Rocco Lupoi; Fergal J O'Brien; Katelyn J Genoud; Yingchun Xie

ITSC 2023; 54-61https://doi.org/10.31399/asm.cp.itsc2023p0054

View Articletitled, A Novel Antibacterial and Biocompatible Ta-Ag Coating Fabricated by Cold Spray Technology

Automotive Applications

Thermo-Physical Properties of Plasma-Sprayed K₂Ti₆O₁₃ Coatings for Diesel Engine Piston

Yin-Qiu Sun; Yong-Sheng Zhu; Xiao-Tao Luo; Jiu-Tao Gao; Chang-Jiu Li

ITSC 2023; 62-69https://doi.org/10.31399/asm.cp.itsc2023p0062

View Articletitled, Thermo-Physical Properties of Plasma-Sprayed K<sub>2</sub>Ti<sub>6</sub>O<sub>13</sub> Coatings for Diesel Engine Piston

Enhancing Production Control for PTWA Engine Bore Coating

K. Kowalsky; D. Barton; D. Cook; C. Berghorn

ITSC 2023; 70-76https://doi.org/10.31399/asm.cp.itsc2023p0070

View Articletitled, Enhancing Production Control for PTWA Engine Bore Coating

Characterization and New Evaluation Techniques

Quantitative and Qualitative Nondestructive Evaluation of Cold Spray Manufactured Copper and Aluminum Samples

Ozan C. Ozdemir; Kishore Kumar Indu Kumar; Mann Baijukumar Patel; Samuel Boese

ITSC 2023; 77-84https://doi.org/10.31399/asm.cp.itsc2023p0077

View Articletitled, Quantitative and Qualitative Nondestructive Evaluation of Cold Spray Manufactured Copper and Aluminum Samples

Cold Sprayed Deposits Characterized by Positron Annihilation Spectroscopy

Jan Cizek; Jan Medricky; Filip Stefanik; Jakub Cizek; Oksana Melikhova

ITSC 2023; 85-90https://doi.org/10.31399/asm.cp.itsc2023p0085

View Articletitled, Cold Sprayed Deposits Characterized by Positron Annihilation Spectroscopy

Oxide Characterization of Copper Cold Spray Feedstock Powders with X-Ray Photoelectron Spectroscopy

Christina Maria Katsari; Yannis Kotsakis; Stephen Yue; Bruno Guerreiro; Dominique Poirier; Jason D. Giallonardo

ITSC 2023; 91-97https://doi.org/10.31399/asm.cp.itsc2023p0091

View Articletitled, Oxide Characterization of Copper Cold Spray Feedstock Powders with X-Ray Photoelectron Spectroscopy

Application of In Situ Observation Techniques for Understanding the Principles of the Cold Spray Coating Formation

Yijun Yao; Wenbo Li; Zhoukun Shi; Marie-Pierre Planche; Hanlin Liao; Sihao Deng

ITSC 2023; 98-103https://doi.org/10.31399/asm.cp.itsc2023p0098

View Articletitled, Application of In Situ Observation Techniques for Understanding the Principles of the Cold Spray Coating Formation

Comparative Study of Ni-, Co- and Fe-Based Laser Cladding Coatings for Wear and Corrosion Resistance

Bernard Larouche; Rolf Hepp; Guido Reisel; Petr Fiala

ITSC 2023; 104-111https://doi.org/10.31399/asm.cp.itsc2023p0104

View Articletitled, Comparative Study of Ni-, Co- and Fe-Based Laser Cladding Coatings for Wear and Corrosion Resistance

Microstructural Evaluation of Tungsten Carbide-Cobalt (WC-17Co) Alloy Deposited by Cold Spraying, High Velocity Air Fuel, and High Velocity Oxygen Fuel Spraying Technologies

Theresa Grabowski; Daniel Gerner; Fardad Azarmi; Martin McDonnell; Uchechi Okeke

ITSC 2023; 112-118https://doi.org/10.31399/asm.cp.itsc2023p0112

View Articletitled, Microstructural Evaluation of Tungsten Carbide-Cobalt (WC-17Co) Alloy Deposited by Cold Spraying, High Velocity Air Fuel, and High Velocity Oxygen Fuel Spraying Technologies

Cavitation Performance of Steel Substrate and HVOF Sprayed WC-Co-Cr Coatings

Ahmed Algoburi; Rehan Ahmed; Mehdi Nazarinia

ITSC 2023; 119-126https://doi.org/10.31399/asm.cp.itsc2023p0119

View Articletitled, Cavitation Performance of Steel Substrate and HVOF Sprayed WC-Co-Cr Coatings

Influence of Nozzle Diameter on Electric Arc Dynamics in a Cascaded-Anode Plasma Torch

Céline Ruelle; Simon Goutier; Vincent Rat; Alan Kéromnés; Geoffroy Rivaud; Christophe Chazelas; Érick Meillot

ITSC 2023; 127-134https://doi.org/10.31399/asm.cp.itsc2023p0127

View Articletitled, Influence of Nozzle Diameter on Electric Arc Dynamics in a Cascaded-Anode Plasma Torch

How to Determine Process Fluctuations in Wire-Arc Spraying

K. Bobzin; H. Heinemann; E. Burbaum; H. Naber

ITSC 2023; 135-141https://doi.org/10.31399/asm.cp.itsc2023p0135

View Articletitled, How to Determine Process Fluctuations in Wire-Arc Spraying

A Novel Approach to In Situ Coating Thickness Measurements in Thermal Spraying

Uroš Hudomalj; Ehsan Fallahi Sichani; Lukas Weiss; Majid Nabavi; Konrad Wegener

ITSC 2023; 142-147https://doi.org/10.31399/asm.cp.itsc2023p0142

View Articletitled, A Novel Approach to In Situ Coating Thickness Measurements in Thermal Spraying

Coatings for Carbon Neutrality and Environmental Impact

The Effect of a Gradient Porous Structure on the Performance of Cold-Sprayed Electrodes used in Alkaline Water Electrolysis

Xinge Jiang; Taikai Liu; Hanlin Liao

ITSC 2023; 148-154https://doi.org/10.31399/asm.cp.itsc2023p0148

View Articletitled, The Effect of a Gradient Porous Structure on the Performance of Cold-Sprayed Electrodes used in Alkaline Water Electrolysis

Cold Spray and Thermal Spray Additive Manufacturing

Towards a General Cold Spray Additive Manufacturing Framework for Fabricating Complex Structural Components

Wenbo Li; Hongjian Wu; Zhoukun Shi; Hanlin Liao; Sophie Costil; Sihao Deng

ITSC 2023; 155-160https://doi.org/10.31399/asm.cp.itsc2023p0155

View Articletitled, Towards a General Cold Spray Additive Manufacturing Framework for Fabricating Complex Structural Components

Additive Manufacturing of Multi-Material Assembly

Amela Kusuran; Geoffrey Darut; Ludovic Vitu; Marie-Pierre Planche; David Mercs

ITSC 2023; 161-166https://doi.org/10.31399/asm.cp.itsc2023p0161

View Articletitled, Additive Manufacturing of Multi-Material Assembly

Property Characterization of Al1050 Bulk Cold Spray Deposits and Numerical Study of Thermomechanical Effects during the Additive Growth

Mohamed Sokore; Sihao Deng; Hanlin Liao; Rija Nrina Raoelison; Shuohong Gao

ITSC 2023; 167-172https://doi.org/10.31399/asm.cp.itsc2023p0167

View Articletitled, Property Characterization of Al1050 Bulk Cold Spray Deposits and Numerical Study of Thermomechanical Effects during the Additive Growth

Cold Gas Spraying 3D Printing of Ti Bipolar Plates for PEM Water Electrolyzers Cost Reduction

A. Garfias; R. Vaz; V. Albaladejo-Fuentes; J. Sánchez; M. Sarret; T. Andreu; I.G. Cano; A. Rocha; R.B. Ferreira; D.S. Falcão; A.M.F.R Pinto

ITSC 2023; 173-178https://doi.org/10.31399/asm.cp.itsc2023p0173

View Articletitled, Cold Gas Spraying 3D Printing of Ti Bipolar Plates for PEM Water Electrolyzers Cost Reduction

Additive Manufacturing of Channels and Surface Features Using Wire-Arc Spray

Joshua Palumbo; Ramgopal Varma Ramaraju; Sanjeev Chandra

ITSC 2023; 179-185https://doi.org/10.31399/asm.cp.itsc2023p0179

View Articletitled, Additive Manufacturing of Channels and Surface Features Using Wire-Arc Spray

Mixed-Material Feedstocks for Cold Spray Additive Manufacturing of Metal-Polymer Composites

Matthew S. Schwenger; Madison S. Kaminskyj; Francis M. Haas; Joseph F. Stanzione, III

ITSC 2023; 186-191https://doi.org/10.31399/asm.cp.itsc2023p0186

View Articletitled, Mixed-Material Feedstocks for Cold Spray Additive Manufacturing of Metal-Polymer Composites

Methods for 3D Volume Building in Cold Spray Additive Manufacturing

Hongjian Wu; Alexander List; Frank Gärtner; Thomas Klassen; Sihao Deng

ITSC 2023; 193-199https://doi.org/10.31399/asm.cp.itsc2023p0193

View Articletitled, Methods for 3D Volume Building in Cold Spray Additive Manufacturing

Cold Spray Applications

Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings

Reza Jafari; Minnamari Vippola; Heli Koivuluoto; Jan Cizek; Frantisek Lukac; Ladislav Cvrcek; Matej Buril; Jan Walter; Jarkko Kiilakoski; Mari Honkanen; Minnamari Vippola

ITSC 2023; 200-207https://doi.org/10.31399/asm.cp.itsc2023p0200

View Articletitled, Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings

Development of a Duplex Sn-Cu Coating on Carbon Fiber-Reinforced Polymers (CFRPs) using Cold Spray and Electrodeposition Processes

Panteha Fallah; Stephen Yue; André McDonald

ITSC 2023; 208-213https://doi.org/10.31399/asm.cp.itsc2023p0208

View Articletitled, Development of a Duplex Sn-Cu Coating on Carbon Fiber-Reinforced Polymers (CFRPs) using Cold Spray and Electrodeposition Processes

Cold Spray Process Fundamentals

Independent Control of Particle Temperature and Velocity Using a Novel Powder Preheater Design for Low Pressure Cold Spray

D. MacDonald; B. Jodoin

ITSC 2023; 214-221https://doi.org/10.31399/asm.cp.itsc2023p0214

View Articletitled, Independent Control of Particle Temperature and Velocity Using a Novel Powder Preheater Design for Low Pressure Cold Spray

Analyzing Cold Spray of Polymer-Coated Metal Particles on Polymeric and Composite Substrates

Nand Kishore Singh; Nicholas Beau Mennie; Isaac Nault; Behrad Koohbor; Francis M. Haas; Ratneshwar Jha

ITSC 2023; 222-228https://doi.org/10.31399/asm.cp.itsc2023p0222

View Articletitled, Analyzing Cold Spray of Polymer-Coated Metal Particles on Polymeric and Composite Substrates

A Concept of Aerospike Nozzle for Cold Spray Additive Manufacturing—Towards a Potential Solution for Preventing the Issue of Clogging

Rija Nrina Raoelison; Sabeur Msolli; Sihao Deng; Ashish Vashishtha; Amit Sharma; Dean Callaghan; Wassim Zaim-Mounajed; Teng Zhang; Essolé Padayodi; Jean-Claude Sagot; Ramesh Raghavendra

ITSC 2023; 229-234https://doi.org/10.31399/asm.cp.itsc2023p0229

View Articletitled, A Concept of Aerospike Nozzle for Cold Spray Additive Manufacturing—Towards a Potential Solution for Preventing the Issue of Clogging

Investigation of a Modified Circular Nozzle for Cold Spray Applications

Amit Kumar Sharma; Ashish Vashishtha; Dean Callaghan; Srinivasan Rao Bakshi; M. Kamaraj; Ramesh Raghavendra

ITSC 2023; 235-241https://doi.org/10.31399/asm.cp.itsc2023p0235

View Articletitled, Investigation of a Modified Circular Nozzle for Cold Spray Applications

Cold Sprayed or Aerosol Deposition: Metals, Polymers, Ceramics, and Metal Matrix Composite Coatings

Erosion Behaviour of Cold Sprayed Coatings Made of CrMnFeCoNi High-Entropy Alloy or Composite Powders Containing WC Hard Particles in a Pure Nickel Matrix

Giacomo Cappelli; Shuo Yin; Rocco Lupoi

ITSC 2023; 242-249https://doi.org/10.31399/asm.cp.itsc2023p0242

View Articletitled, Erosion Behaviour of Cold Sprayed Coatings Made of CrMnFeCoNi High-Entropy Alloy or Composite Powders Containing WC Hard Particles in a Pure Nickel Matrix

High Ductility and Strength by Internal Interface Recrystallization of Cold Sprayed Zinc and its Fracture Behavior

Chunjie Huang; Levke Wiehler; Alexander List; Andreas Elsenberg; Frank Gärtner; Thomas Klassen; Banglong Fu; Ting Chen; Benjamin Klusemann; Zhengmao Zhang; Wenya Li

ITSC 2023; 250-257https://doi.org/10.31399/asm.cp.itsc2023p0250

View Articletitled, High Ductility and Strength by Internal Interface Recrystallization of Cold Sprayed Zinc and its Fracture Behavior

Forming Behaviour of Additively Manufactured Al/Ti Material Compounds Produced by Cold Spraying

Rico Drehmann; Marcel Graf; Thomas Lampke; Pascal Colditz; Birgit Awiszus; Alexander List; Frank Gärtner

ITSC 2023; 258-265https://doi.org/10.31399/asm.cp.itsc2023p0258

View Articletitled, Forming Behaviour of Additively Manufactured Al/Ti Material Compounds Produced by Cold Spraying

Cold Spraying of Inconel 625 Thick Deposits

Farrokh Taherkhani; A. List; S. Keller; N. Kashaev; F. Gärtner; T. Klassen

ITSC 2023; 266-272https://doi.org/10.31399/asm.cp.itsc2023p0266

View Articletitled, Cold Spraying of Inconel 625 Thick Deposits

Multi-Purpose Additives Towards a Better Polymer Cold Spray Process

Tristan W. Bacha; Francis M. Haas; Joseph F. Stanzione III

ITSC 2023; 273-279https://doi.org/10.31399/asm.cp.itsc2023p0273

View Articletitled, Multi-Purpose Additives Towards a Better Polymer Cold Spray Process

Effect of Carbon Fiber Orientation when Cold Spraying Metallic Powders onto Carbon Fiber Reinforced Polymers

Andre C. Liberati; Payank Patel; Amit Roy; Phuong Vo; Chunzhou Pan; Christian Moreau; Richard R. Chromik; Stephen Yue; Pantcho Stoyanov

ITSC 2023; 280-287https://doi.org/10.31399/asm.cp.itsc2023p0280

View Articletitled, Effect of Carbon Fiber Orientation when Cold Spraying Metallic Powders onto Carbon Fiber Reinforced Polymers

Improvement of the Cold Sprayability of Hard Steel Alloy Powders

B. Guerreiro; D. Poirier; Y. Thomas

ITSC 2023; 288-294https://doi.org/10.31399/asm.cp.itsc2023p0288

View Articletitled, Improvement of the Cold Sprayability of Hard Steel Alloy Powders

Thermal Oxidation of Heavily Deformed Zn Coatings Produced by Cold Spray and Formation of ZnO Nanowires

Maryam Razavipour; Denise Criado; Alejandro Zúñiga; Bertrand Jodoin

ITSC 2023; 295-302https://doi.org/10.31399/asm.cp.itsc2023p0295

View Articletitled, Thermal Oxidation of Heavily Deformed Zn Coatings Produced by Cold Spray and Formation of ZnO Nanowires

Equipment, Consumables, and Economics

Design of Powder Feedstocks for Net Shape Coatings

Oliver Lanz; Manuel Schubert; Wellington Goes; Giuseppe Ruggiero; Stefan Björklund; Shrikant Joshi

ITSC 2023; 303-309https://doi.org/10.31399/asm.cp.itsc2023p0303

View Articletitled, Design of Powder Feedstocks for Net Shape Coatings

Influence of Current Modulation on Particle Sizes by Wire Arc Atomizing

Sebastian Weis; Stefan Brumm; Robin Grunert; Manuel Halmaghi; Jan Morgenschweis; Jürgen Bosler

ITSC 2023; 310-315https://doi.org/10.31399/asm.cp.itsc2023p0310

View Articletitled, Influence of Current Modulation on Particle Sizes by Wire Arc Atomizing

Functional Coatings

Printed Thermal Sensors for Harsh Environment by Plasma Spray

Florin D. Duminica; Muthu Karuppasamy; Philippe Guaino

ITSC 2023; 316-322https://doi.org/10.31399/asm.cp.itsc2023p0316

View Articletitled, Printed Thermal Sensors for Harsh Environment by Plasma Spray

Process Innovation for the Internal Coating of Carbon Fiber Reinforced Plastic (CFRP) Tubes via Thermal Spraying

Christian Semmler; Andreas Killinger

ITSC 2023; 323-329https://doi.org/10.31399/asm.cp.itsc2023p0323

View Articletitled, Process Innovation for the Internal Coating of Carbon Fiber Reinforced Plastic (CFRP) Tubes via Thermal Spraying

Functionalization of Fiber-Reinforced Thermoplastics for EMF-Shielding Applications

Manuel Reif; Jana Gebauer; Alexander Paul; Christiane Rothe; Andrés Fabián Lasagni

ITSC 2023; 330-335https://doi.org/10.31399/asm.cp.itsc2023p0330

View Articletitled, Functionalization of Fiber-Reinforced Thermoplastics for EMF-Shielding Applications

Manufacturing and Icephobic Performance Evaluation of Cold Sprayed Adhesive Perfluoroalkoxy Alkane Coatings

Z. Leclerc; B. Jodoin; L.E. McMunn; N. Ben; A. Nastic

ITSC 2023; 336-343https://doi.org/10.31399/asm.cp.itsc2023p0336

View Articletitled, Manufacturing and Icephobic Performance Evaluation of Cold Sprayed Adhesive Perfluoroalkoxy Alkane Coatings

Novel Coatings

A Novel Bond Coat with Excellent Adhesive Strength Deposited by Plasma-Spraying of Mo-Clad Core-Shell-Structured Metal Powders

Chang-Jiu Li; Jiu-Jing Song; Xiao-Tao Luo; Xin-Yuan Dong; Li Zhang

ITSC 2023; 344-350https://doi.org/10.31399/asm.cp.itsc2023p0344

View Articletitled, A Novel Bond Coat with Excellent Adhesive Strength Deposited by Plasma-Spraying of Mo-Clad Core-Shell-Structured Metal Powders

Novel Approach to Deposit Thermally Sensitive Materials Using Hybrid Plasma Spraying

Tomas Tesar; Radek Musalek; Frantisek Lukac; Jonas Dudik

ITSC 2023; 351-356https://doi.org/10.31399/asm.cp.itsc2023p0351

View Articletitled, Novel Approach to Deposit Thermally Sensitive Materials Using Hybrid Plasma Spraying

Novel Fe- and Ni-Based HVOF-Sprayed Coatings Compared to APS-Sprayed TBC Systems for Improved Thermal Insulation Capabilities in Cryogenic Environments

Michél Hauer; Andreas Gericke; Lukas Möhrke; Werner Krömmer; Knuth-Michael Henkel

ITSC 2023; 357-364https://doi.org/10.31399/asm.cp.itsc2023p0357

View Articletitled, Novel Fe- and Ni-Based HVOF-Sprayed Coatings Compared to APS-Sprayed TBC Systems for Improved Thermal Insulation Capabilities in Cryogenic Environments

Characterisation of Shrouded Plasma-Sprayed Al₄C₃-Ni Alloy Composite Coatings as Novel Bond Coats for TBCs

Wen-Fa Kan; Steven Matthews

ITSC 2023; 365-372https://doi.org/10.31399/asm.cp.itsc2023p0365

View Articletitled, Characterisation of Shrouded Plasma-Sprayed Al<sub>4</sub>C<sub>3</sub>-Ni Alloy Composite Coatings as Novel Bond Coats for TBCs

The Steady-State Composition and Microstructure of 42%WC-42%Cr₃C₂-16%Ni HVOF and Shrouded Plasma Sprayed Coatings at 900°C

Steven Matthews; Francesca O’Neil

ITSC 2023; 373-379https://doi.org/10.31399/asm.cp.itsc2023p0373

View Articletitled, The Steady-State Composition and Microstructure of 42%WC-42%Cr<sub>3</sub>C<sub>2</sub>-16%Ni HVOF and Shrouded Plasma Sprayed Coatings at 900°C

Characterization of Thermally Protective Al₂O₃-TiO₂ Coating Fabricated by Atmospheric Plasma Spraying

Hansol Kwon; Yeonwoo Yoo; Youngjin Park; Uk Hee Nam; Eungsun Byon

ITSC 2023; 380-385https://doi.org/10.31399/asm.cp.itsc2023p0380

View Articletitled, Characterization of Thermally Protective Al<sub>2</sub>O<sub>3</sub>-TiO<sub>2</sub> Coating Fabricated by Atmospheric Plasma Spraying

Formation of AlSiCCr Columnar Medium-Entropy Coating via Aluminizing of Cr₃C₂ 25NiCr HVOF Coating

Andre Renan Mayer; Willian Rafael de Oliveira; Luciano Augusto Lourençato; Anderson Geraldo Marenda Pukasiewicz

ITSC 2023; 386-391https://doi.org/10.31399/asm.cp.itsc2023p0386

View Articletitled, Formation of AlSiCCr Columnar Medium-Entropy Coating via Aluminizing of Cr<sub>3</sub>C<sub>2</sub> 25NiCr HVOF Coating

Novel Coatings: Tribological Coatings

Investigating the Effect of Solid Lubricants Addition on Friction and Wear Behaviour of Thermally Sprayed Coatings

J. Patrikalos; P. Ioannou; D. Andreouli; I. Georgiopoulos; D. Skaltsas; C. I. Papadopoulos; Ch. I. Sarafoglou

ITSC 2023; 392-399https://doi.org/10.31399/asm.cp.itsc2023p0392

View Articletitled, Investigating the Effect of Solid Lubricants Addition on Friction and Wear Behaviour of Thermally Sprayed Coatings

Novel Coatings: High Entropy Alloys

Effect of Heat-Treatment on the Microstructure and Mechanical Properties of CoCrFeNiMn High Entropy Alloy Additively Manufactured via Cold Spray

Cletus J. Akisin; Chris J. Bennett; Federico Venturi; Tanvir Hussain

ITSC 2023; 400-407https://doi.org/10.31399/asm.cp.itsc2023p0400

View Articletitled, Effect of Heat-Treatment on the Microstructure and Mechanical Properties of CoCrFeNiMn High Entropy Alloy Additively Manufactured via Cold Spray

Supersaturated Solid Solution Formation in the Metastable Eutectic High-Entropy Alloy Al_0.3CoCrFeNiMo_0.75 by Laser Metal Deposition and Degradation of Wear Resistance by Segregation

Bianca Preuß; Thomas Lindner; Thomas Lampke

ITSC 2023; 408-413https://doi.org/10.31399/asm.cp.itsc2023p0408

View Articletitled, Supersaturated Solid Solution Formation in the Metastable Eutectic High-Entropy Alloy Al<sub>0.3</sub>CoCrFeNiMo<sub>0.75</sub> by Laser Metal Deposition and Degradation of Wear Resistance by Segregation

Alloy Design of Feedstock Material for Additive Manufacturing—Exploring the Al-Co-Cr-Fe-Ni-Ti Compositionally Complex Alloys

L. Gerdt; M. Müller; M. Heidowitzsch; J. Kaspar; E. Lopez; M. Zimmermann; C. Leyens; A. Hilhorst; P.J. Jacques

ITSC 2023; 414-421https://doi.org/10.31399/asm.cp.itsc2023p0414

View Articletitled, Alloy Design of Feedstock Material for Additive Manufacturing—Exploring the Al-Co-Cr-Fe-Ni-Ti Compositionally Complex Alloys

Novel Coatings: Hydrophobic Coatings and TBCs

Effects of Thermal Exposure on Microstructure of Thermal Barriers Deposited by Hybrid Plasma Spraying

Radek Musalek; Tomas Tesar; Jan Medricky; Frantisek Lukac; Jonas Dudik

ITSC 2023; 422-427https://doi.org/10.31399/asm.cp.itsc2023p0422

View Articletitled, Effects of Thermal Exposure on Microstructure of Thermal Barriers Deposited by Hybrid Plasma Spraying

Novel Processes: Hybrid Manufacturing, Laser Processing, Additive Manufacturing and Repair

Laser Texturing as Interfacial Treatment for Enhancing the Material Behaviors—The Real Influence of the Laser Treatment

Sophie Costil; Laura Convert; Eric Bourillot; Nicolas Pocholle; Manuel François

ITSC 2023; 428-435https://doi.org/10.31399/asm.cp.itsc2023p0428

View Articletitled, Laser Texturing as Interfacial Treatment for Enhancing the Material Behaviors—The Real Influence of the Laser Treatment

Automated Path and Trajectory Planning for Automated Repair of Damaged Components by Cold Spray

Marcel Lewke; Hongjian Wu; Alexander List; Frank Gärtner; Thomas Klassen; Alexander Fay

ITSC 2023; 436-442https://doi.org/10.31399/asm.cp.itsc2023p0436

View Articletitled, Automated Path and Trajectory Planning for Automated Repair of Damaged Components by Cold Spray

Hybrid Aerosol Deposition of Dense Al₂O₃ Coatings and Evaluation of the Through-Thickness Effect

Mohammed Shahien; Kentaro Shinoda

ITSC 2023; 443-449https://doi.org/10.31399/asm.cp.itsc2023p0443

View Articletitled, Hybrid Aerosol Deposition of Dense Al<sub>2</sub>O<sub>3</sub> Coatings and Evaluation of the Through-Thickness Effect

Development and Characterization of Micro-Plasma Additive Manufacturing Process for Inconel 718 Superalloy

Jason Nagy; Adria Barcelo Singh; Xiao Huang

ITSC 2023; 450-457https://doi.org/10.31399/asm.cp.itsc2023p0450

View Articletitled, Development and Characterization of Micro-Plasma Additive Manufacturing Process for Inconel 718 Superalloy

Effects of Plume Quenching on Controlled Atmosphere Plasma Sprayed Metals

Emma Peleg; Andrew Vackel

ITSC 2023; 458-465https://doi.org/10.31399/asm.cp.itsc2023p0458

View Articletitled, Effects of Plume Quenching on Controlled Atmosphere Plasma Sprayed Metals

Effect of Laser Cladding Process Parameters on Microstructure and Properties of Martensitic Stainless Steel Cladding Layer

Kaiping Du; Ziqiang Pi; Xu Wang; Xing Chen; Yao Ma; Zhaorao Zheng

ITSC 2023; 467-472https://doi.org/10.31399/asm.cp.itsc2023p0467

View Articletitled, Effect of Laser Cladding Process Parameters on Microstructure and Properties of Martensitic Stainless Steel Cladding Layer

Anisotropy of Mechanical Properties of DMD Build Inconel 738

Ondrej Kovarik; Jaroslav Cech; Egehan Kiziklioglu; Jan Cizek; Tobias Stittgen

ITSC 2023; 473-479https://doi.org/10.31399/asm.cp.itsc2023p0473

View Articletitled, Anisotropy of Mechanical Properties of DMD Build Inconel 738

Novel Processes for Wear and Corrosion Protection Coatings

Cost-Effective UHVOF-Sprayed Coatings for the Wear Protection of Valves

Kirsten Bobzin; Hendrik Heinemann; Elisa Burbaum; Marvin Schulz

ITSC 2023; 480-486https://doi.org/10.31399/asm.cp.itsc2023p0480

View Articletitled, Cost-Effective UHVOF-Sprayed Coatings for the Wear Protection of Valves

Orthopedic Implants

Comparative Corrosion Behaviour of Cold Sprayed Titanium/Hydroxyapatite and Titanium/Baghdadite Composite Coatings in Simulated Body Fluid Environment

Avneesh Kumar; Teekam Chand; Ravi Kant; Harpreet Singh

ITSC 2023; 487-494https://doi.org/10.31399/asm.cp.itsc2023p0487

View Articletitled, Comparative Corrosion Behaviour of Cold Sprayed Titanium/Hydroxyapatite and Titanium/Baghdadite Composite Coatings in Simulated Body Fluid Environment

Poster Session

Effects of Plasma-Related Input Parameters on Fluctuation and Coating Characteristics in APS—Towards a Transdisciplinary Integration of Technical Assessments and Human Knowledge-Driven Evaluations

Maximilian Grimm; Rico Drehmann; Thomas Lindner; Tina Morgenstern; Anja Klichowicz; Franziska Bocklisch; Thomas Lampke

ITSC 2023; 495-502https://doi.org/10.31399/asm.cp.itsc2023p0495

View Articletitled, Effects of Plasma-Related Input Parameters on Fluctuation and Coating Characteristics in APS—Towards a Transdisciplinary Integration of Technical Assessments and Human Knowledge-Driven Evaluations

Microstructure and Properties of Fe-Based Amorphous Coating by HVOF

Ziqiang Pi; Kaiping Du; Xing Chen; Zhaoran Zheng

ITSC 2023; 503-508https://doi.org/10.31399/asm.cp.itsc2023p0503

View Articletitled, Microstructure and Properties of Fe-Based Amorphous Coating by HVOF

Cold Spray Nickel-Coated Aluminum Composite Powder Part I—Study on Microstructure of Coatings

Xiaoliang Lu; Zhaoran Zheng; Kang Yuan; Kaiping Du

ITSC 2023; 509-513https://doi.org/10.31399/asm.cp.itsc2023p0509

View Articletitled, Cold Spray Nickel-Coated Aluminum Composite Powder Part I—Study on Microstructure of Coatings

Effect of Laser Power on Forming Quality and Crystallization of Amorphous Alloy Prepared by SLM

Xing Chen; Kaiping Du; Ziqiang Pi; Zhaoran Zheng

ITSC 2023; 514-518https://doi.org/10.31399/asm.cp.itsc2023p0514

View Articletitled, Effect of Laser Power on Forming Quality and Crystallization of Amorphous Alloy Prepared by SLM

Adhesion of HVOF Sprayed Coatings on Laser Textured Steel and Ceramics Substrates

Marek Vostřák; Žaneta Dlouhá; Josef Duliškovič; Lucie Jarolímová; Šárka Houdková; Jana Na’ová; Ole Peters; Joerg Schille; Udo Loeschner; Jiří Martan

ITSC 2023; 519-524https://doi.org/10.31399/asm.cp.itsc2023p0519

View Articletitled, Adhesion of HVOF Sprayed Coatings on Laser Textured Steel and Ceramics Substrates

Investigation of Corrosion Behavior and Surface Characteristics of CoCr Alloy using Plasma-Sprayed HA/ZnO Reinforced Coatings for Biomedical Implants

Puneet Bansal; Gurpreet Singh; Hazoor Singh Sidhu

ITSC 2023; 525-530https://doi.org/10.31399/asm.cp.itsc2023p0525

View Articletitled, Investigation of Corrosion Behavior and Surface Characteristics of CoCr Alloy using Plasma-Sprayed HA/ZnO Reinforced Coatings for Biomedical Implants

Inner Diameter High-Velocity Air Fuel (ID-HVAF) Spraying of Copper, Compared to Cold Spray

Golnoush Asadiankouhidehkordi; Andre C. Liberati; Fadhel Ben Ettouil; Christian Moreau

ITSC 2023; 531-537https://doi.org/10.31399/asm.cp.itsc2023p0531

View Articletitled, Inner Diameter High-Velocity Air Fuel (ID-HVAF) Spraying of Copper, Compared to Cold Spray

Modeling the Formation of Thermal Spray Coatings on Substrates with Arbitrary Shapes

Behrouz Haghighi; Mohammad Passandideh-Fard; Javad Mostaghimi

ITSC 2023; 538-546https://doi.org/10.31399/asm.cp.itsc2023p0538

View Articletitled, Modeling the Formation of Thermal Spray Coatings on Substrates with Arbitrary Shapes

Influence of Size and Mixing Ratio of Micro-Forging Particle on Al Alloy Coating Structure via an In-Situ MF Cold Spray with Simultaneous Injection of Powder form Axial/Radial Directions of Nozzle

Kazuhiko Sakaki; Chilhaya Saito; Ryo Kawakami

ITSC 2023; 547-552https://doi.org/10.31399/asm.cp.itsc2023p0547

View Articletitled, Influence of Size and Mixing Ratio of Micro-Forging Particle on Al Alloy Coating Structure via an In-Situ MF Cold Spray with Simultaneous Injection of Powder form Axial/Radial Directions of Nozzle

Powder Tailoring and New Powder Materials Development

Effects of Zr and Si Addition on Mechanical Properties of Al_0.5CoCrFeNi High-Entropy Alloys

Kirsten Bobzin; Hendrik Heinemann; Marvin Erck; Andreas Schacht; Benedikt Korte; Paul König

ITSC 2023; 553-559https://doi.org/10.31399/asm.cp.itsc2023p0553

View Articletitled, Effects of Zr and Si Addition on Mechanical Properties of Al<sub>0.5</sub>CoCrFeNi High-Entropy Alloys

A Study on the Powder Manufacturing Effect on Flowability and Deformability of Pure Cu Powders in Cold Spray Application

Niloofar Eftekhari; Dulal Saha; Hamid Jahed

ITSC 2023; 560-566https://doi.org/10.31399/asm.cp.itsc2023p0560

View Articletitled, A Study on the Powder Manufacturing Effect on Flowability and Deformability of Pure Cu Powders in Cold Spray Application

Development of a Synthesis Route for High-Entropy Alloy Feedstock Particles for Cold Spray Following Conventional and Sequential Mechanical Milling Regimes

Aisa Grace Custodio; Gobinda C. Saha; Clodualdo Aranas, Jr.

ITSC 2023; 567-573https://doi.org/10.31399/asm.cp.itsc2023p0567

View Articletitled, Development of a Synthesis Route for High-Entropy Alloy Feedstock Particles for Cold Spray Following Conventional and Sequential Mechanical Milling Regimes

Cold Spray Deposition of Aluminium 6061 Decorated with Al₂O₃ Nanoparticles

Bahareh Marzbanrad; Ehsan Marzbanrad; Hamid Jahed

ITSC 2023; 574-580https://doi.org/10.31399/asm.cp.itsc2023p0574

View Articletitled, Cold Spray Deposition of Aluminium 6061 Decorated with Al<sub>2</sub>O<sub>3</sub> Nanoparticles

Composite Capsule Embedded Coatings Deposition using Thermal Spraying

D. Skaltsas; C. I. Papadopoulos; Ch. I. Sarafoglou; P. Ioannou; D. Andreouli; I. Georgiopoulos; C. Zotiadis; D. M. Korres; S. Vouyiouka

ITSC 2023; 581-588https://doi.org/10.31399/asm.cp.itsc2023p0581

View Articletitled, Composite Capsule Embedded Coatings Deposition using Thermal Spraying

Microstructure and Properties of Cr₃C₂-Rich Binary Cr₃C₂-WC-Ni(Co) Hardmetal Coatings

Lutz-Michael Berger; Susan Conze; Kerstin Gnauck; Marek Vostřák; Šárka Houdková; Tomáš Taranda

ITSC 2023; 589-596https://doi.org/10.31399/asm.cp.itsc2023p0589

View Articletitled, Microstructure and Properties of Cr<sub>3</sub>C<sub>2</sub>-Rich Binary Cr<sub>3</sub>C<sub>2</sub>-WC-Ni(Co) Hardmetal Coatings

Renewable Energies and Storage

Tab-to-Busbar Interconnects Formed by Dual Flow Cold Spraying

Roman Gr. Maev; Volf Leshchynsky; Emil Strumban; Mircea Pantea; Brian J. Robert; Thomas P. Brackett

ITSC 2023; 597-603https://doi.org/10.31399/asm.cp.itsc2023p0597

View Articletitled, Tab-to-Busbar Interconnects Formed by Dual Flow Cold Spraying

Performance of Plasma-Sprayed Bi₂O₃–Er₂O₃–WO₃ for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs)

Rui Chen; Xiao-Tao Luo; Li Zhang; Di Wang; Cheng-Xin Li; Chang-Jiu Li

ITSC 2023; 604-609https://doi.org/10.31399/asm.cp.itsc2023p0604

View Articletitled, Performance of Plasma-Sprayed Bi<sub>2</sub>O<sub>3</sub>–Er<sub>2</sub>O<sub>3</sub>–WO<sub>3</sub> for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs)

TBCs and EBCs: APS, SPS, SPPS, and Bond-Coats

Oxidation of In-flight Particles During HVAF—A Numerical Study

Sokhna Awa Bousso Diop; Christian Moreau; Aleksandra Nasti; Ali Dolatabad

ITSC 2023; 610-617https://doi.org/10.31399/asm.cp.itsc2023p0610

View Articletitled, Oxidation of In-flight Particles During HVAF—A Numerical Study

Influence of HVAF Process Parameters on In-Flight NiCoCrAlY Particle Oxidation and Corresponding Splat Characteristics

A.K. Thoutam; M.S. Lamana; A. Mahdavi; A.C. Liberati; F. Ben Ettouil; C. Moreau; A. Dolatabadi

ITSC 2023; 618-624https://doi.org/10.31399/asm.cp.itsc2023p0618

View Articletitled, Influence of HVAF Process Parameters on In-Flight NiCoCrAlY Particle Oxidation and Corresponding Splat Characteristics

The Potential of High Velocity Air Fuel Spraying (HVAF) to Manufacture Bond Coats in Thermal Barrier Coating Systems

Georg Mauer; Karl-Heinz Rauwald; Robert Vaßen

ITSC 2023; 625-632https://doi.org/10.31399/asm.cp.itsc2023p0625

View Articletitled, The Potential of High Velocity Air Fuel Spraying (HVAF) to Manufacture Bond Coats in Thermal Barrier Coating Systems

Isothermal Oxidation Behavior of MCrAlY Bond Coats after Laser Microtexturing

Tomasz Kiełczawa; Paweł Sokołowski; Hanna Myalska-Głowacka; Grzegorz Moskal; Hanna Myalska-Głowacka; Alberto Ion; Alain Denoirjean; Alberto Ion

ITSC 2023; 633-639https://doi.org/10.31399/asm.cp.itsc2023p0633

View Articletitled, Isothermal Oxidation Behavior of MCrAlY Bond Coats after Laser Microtexturing

Effect of Spray Parameters on MCrAlY In-Flight Particle Oxidation and Coating Microstructure Deposited by Internal Diameter High Velocity Air Fuel (ID-HVAF)

M.S. Lamana; A.K. Thoutam; A. Mahdavi; A.C. Liberati; F. Ben Ettouil; C. Moreau; A. Dolatabadi

ITSC 2023; 640-646https://doi.org/10.31399/asm.cp.itsc2023p0640

View Articletitled, Effect of Spray Parameters on MCrAlY In-Flight Particle Oxidation and Coating Microstructure Deposited by Internal Diameter High Velocity Air Fuel (ID-HVAF)

Study on the Attack of Molten Silicates to Thermal Barrier Coatings at Varying Service Temperatures

Roberto Fernando Martins; Antonio Augusto Couto; Carlos Roberto Camello Lima

ITSC 2023; 647-652https://doi.org/10.31399/asm.cp.itsc2023p0647

View Articletitled, Study on the Attack of Molten Silicates to Thermal Barrier Coatings at Varying Service Temperatures

Effect of Microstructure on CMAS Interaction of Axial Suspension and Solution Precursor Plasma Sprayed Thermal Barrier Coatings—YSZ & GZ

S. Lokachari; K. Leng; A. Rincon Romero; T. Hussain

ITSC 2023; 653-658https://doi.org/10.31399/asm.cp.itsc2023p0653

View Articletitled, Effect of Microstructure on CMAS Interaction of Axial Suspension and Solution Precursor Plasma Sprayed Thermal Barrier Coatings—YSZ & GZ

High Entropy Alloy (HEA) Bond Coats for Thermal Barrier Coatings (TBCs)—A Review

H. Shahbazi; H. Vakilifard; R.B. Nair; A.C. Liberati; C. Moreau; R S. Lima

ITSC 2023; 659-666https://doi.org/10.31399/asm.cp.itsc2023p0659

View Articletitled, High Entropy Alloy (HEA) Bond Coats for Thermal Barrier Coatings (TBCs)—A Review

High Entropy Oxides as Promising Materials for Thermal Barrier Topcoats—A Review

H. Vakilifard; H. Shahbazi; A.C. Liberati; R.B. Nair; C. Moreau; R. S. Lima

ITSC 2023; 667-674https://doi.org/10.31399/asm.cp.itsc2023p0667

View Articletitled, High Entropy Oxides as Promising Materials for Thermal Barrier Topcoats—A Review

Suspension Sprayed YSZ Thermal Barrier Coatings on Inconel 718 Aerospike Manufactured by Laser Powder Bed Fusion

Filofteia-Laura Toma; Samira Gruber; Alex Selbmann; Christoph Leyens; Martin Propst; Tim Dorau; Christian Bach

ITSC 2023; 675-682https://doi.org/10.31399/asm.cp.itsc2023p0675

View Articletitled, Suspension Sprayed YSZ Thermal Barrier Coatings on Inconel 718 Aerospike Manufactured by Laser Powder Bed Fusion

Advanced Techniques for Evaluation of Thermal Shock Durability of Thermal Barrier Coating

Kazuma Takeno; Yoshifumi Okajima; Taiji Torigoe; Seiji Kuroda; Kaita Ito

ITSC 2023; 683-688https://doi.org/10.31399/asm.cp.itsc2023p0683

View Articletitled, Advanced Techniques for Evaluation of Thermal Shock Durability of Thermal Barrier Coating

Comparative Study of Mo and W Bonding Layers on Graphite during Plasma Spraying

Sik-Chol Kwon; Neo Kang; S-K Hyun; J-K Kim; I-S Kim; T-H Park; H-M Bong

ITSC 2023; 689-694https://doi.org/10.31399/asm.cp.itsc2023p0689

View Articletitled, Comparative Study of Mo and W Bonding Layers on Graphite during Plasma Spraying

Wear and Corrosion Protection

Electrochemical Investigations and Corrosion Behavior of HVOF WC-12Co Coatings Obtained from Powder and Aqueous Suspension

Ulrike Langklotz; Filofteia-Laura Toma; Anja Meyer; Milena Stallmann

ITSC 2023; 695-701https://doi.org/10.31399/asm.cp.itsc2023p0695

View Articletitled, Electrochemical Investigations and Corrosion Behavior of HVOF WC-12Co Coatings Obtained from Powder and Aqueous Suspension

Optimization of Parameters for HVOF Spraying of Fine WC-NiCr Powders

Surinder Singh; Alexander Osi; Scott Wade; Christopher C. Berndt; Andrew Siao Ming Ang; Hugo Howse; Thomas Schlӓfer

ITSC 2023; 702-709https://doi.org/10.31399/asm.cp.itsc2023p0702

View Articletitled, Optimization of Parameters for HVOF Spraying of Fine WC-NiCr Powders

Effect of Boron Alloying on the Fretting Wear Performance of Plasma-Sprayed CuNiIn Coatings

Yong-Sheng Zhu; Xiao-Tao Luo; Yuan Ren; Chang-Jiu Li

ITSC 2023; 710-716https://doi.org/10.31399/asm.cp.itsc2023p0710

View Articletitled, Effect of Boron Alloying on the Fretting Wear Performance of Plasma-Sprayed CuNiIn Coatings

Young Professionals Competition

Antipathogenic Coatings for Antibiotics Reduction in Broiler Farming

Anne Breitrück; Bernd Kreikemeyer; K.-M. Henkel

ITSC 2023; 717-723https://doi.org/10.31399/asm.cp.itsc2023p0717

View Articletitled, Antipathogenic Coatings for Antibiotics Reduction in Broiler Farming

Development of a Wear-Resistant Self-Fluxing Thermal Spray Coating by Solid Lubricant Incorporation

Bianca Preuß; Thomas Lindner; Thomas Lampke; Wolfgang Wietheger

ITSC 2023; 724-729https://doi.org/10.31399/asm.cp.itsc2023p0724

View Articletitled, Development of a Wear-Resistant Self-Fluxing Thermal Spray Coating by Solid Lubricant Incorporation

Long-Term Corrosion Behavior of Atmospheric Plasma Sprayed NiCr Alloy Containing Boron in 3.5 wt.% NaCl Solution

Xin-Yuan Dong; Yong-Sheng Zhu; Xiao-Tao Luo; Chang-Jiu Li

ITSC 2023; 730-734https://doi.org/10.31399/asm.cp.itsc2023p0730

View Articletitled, Long-Term Corrosion Behavior of Atmospheric Plasma Sprayed NiCr Alloy Containing Boron in 3.5 wt.% NaCl Solution

Ultrasonic Atomization as a Novel Route for the Metal Powder Development

Adam Sajbura; Pawel Sokolowski

ITSC 2023; 735-741https://doi.org/10.31399/asm.cp.itsc2023p0735

View Articletitled, Ultrasonic Atomization as a Novel Route for the Metal Powder Development

Repair of Damaged Fiber Reinforced Polymer Composites with Cold Spray

Ibnaj Anamika Anni; Madison S. Kaminskyj; Kazi Zahir Uddin; Francis M. Haas; Behrad Koohbor; Madison S. Kaminskyj; Joseph F. Stanzione III; Francis M. Haas; Behrad Koohbor; Joseph F. Stanzione III

ITSC 2023; 742-747https://doi.org/10.31399/asm.cp.itsc2023p0742

View Articletitled, Repair of Damaged Fiber Reinforced Polymer Composites with Cold Spray

Volume Information

ITSC 2023 Organizing Committee

ITSC 2023; i-iihttps://doi.org/10.31399/asm.cp.itsc2023fm01

View Articletitled, ITSC 2023 Organizing Committee