Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2014: Proceedings from the International Thermal Spray Conference

Aerospace Applications

Bond Coat Engineering Influence on the Evolution of the Microstructure, Bond Strength and Failure of TBCs Subjected to Thermal Cycling

R. S. Lima; B. R. Marple; D. Nagy

ITSC 2014; 1-7https://doi.org/10.31399/asm.cp.itsc2014p0001

View Articletitled, Bond Coat Engineering Influence on the Evolution of the Microstructure, Bond Strength and Failure of TBCs Subjected to Thermal Cycling

Axial Injection Plasma Sprayed Thermal Barrier Coatings

Z. Tang; G. Masindo

ITSC 2014; 8-12https://doi.org/10.31399/asm.cp.itsc2014p0008

View Articletitled, Axial Injection Plasma Sprayed Thermal Barrier Coatings

Elastic and Anelastic Behavior of TBCs Sprayed at High Deposition Rates

ITSC 2014; 13-19https://doi.org/10.31399/asm.cp.itsc2014p0013

View Articletitled, Elastic and Anelastic Behavior of TBCs Sprayed at High Deposition Rates

Relationships Between In-Flight Characteristics and Microstructural Properties of Plasma Sprayed Yttria Stabilized Zirconia

M. L. Sesso; C. C. Berndt; Y. C. Wong; A. S. M Ang

ITSC 2014; 173-178https://doi.org/10.31399/asm.cp.itsc2014p0173

View Articletitled, Relationships Between In-Flight Characteristics and Microstructural Properties of Plasma Sprayed Yttria Stabilized Zirconia

Lanthanum and Gadolinium Zirconate Thermal Barrier Coatings Structure and Properties Evolution

I. Mazilin; L. Baldaev; D. Drobot

ITSC 2014; 179-183https://doi.org/10.31399/asm.cp.itsc2014p0179

View Articletitled, Lanthanum and Gadolinium Zirconate Thermal Barrier Coatings Structure and Properties Evolution

Cold Spray of Carbon Fiber Reinforced Polymer for Lightning Strike Protection

H. Che; S. Yue

ITSC 2014; 497-499https://doi.org/10.31399/asm.cp.itsc2014p0497

View Articletitled, Cold Spray of Carbon Fiber Reinforced Polymer for Lightning Strike Protection

Study of the Residual Stress Distribution of Thermally-Sprayed TBCs Involving Various Interfaces and Laser Drilling

C. Guinard; V. Guipont; M. Jeandin; G. Montay

ITSC 2014; 500-505https://doi.org/10.31399/asm.cp.itsc2014p0500

View Articletitled, Study of the Residual Stress Distribution of Thermally-Sprayed TBCs Involving Various Interfaces and Laser Drilling

Properties, Characterization, and Testing

Shrouded Plasma-Sprayed Cr₃C₂-NiCr Coatings: Effect of Shroud-Substrate Distance

S. Matthews

ITSC 2014; 20-25https://doi.org/10.31399/asm.cp.itsc2014p0020

View Articletitled, Shrouded Plasma-Sprayed Cr<sub>3</sub>C<sub>2</sub>-NiCr Coatings: Effect of Shroud-Substrate Distance

Characterization of a HVOF-Sprayed WC-CoCr Coating Before and After Laser-Assisted Turning

K. Bobzin; L. Zhao; M. Öte; T. F. Linke; F. Klocke; C. Brummer; S. Graefe

ITSC 2014; 26-30https://doi.org/10.31399/asm.cp.itsc2014p0026

View Articletitled, Characterization of a HVOF-Sprayed WC-CoCr Coating Before and After Laser-Assisted Turning

Interface Fracture Characterization of Plasma Sprayed and HIP Bonded Zr Coatings on U-Mo Sheet using Bulge Testing

K. Hollis; C. Liu; R. Leckie; M. Lovato

ITSC 2014; 31-36https://doi.org/10.31399/asm.cp.itsc2014p0031

View Articletitled, Interface Fracture Characterization of Plasma Sprayed and HIP Bonded Zr Coatings on U-Mo Sheet using Bulge Testing

Plasma Spraying

Optimization of an Emulator Based on Nonlinear Auto Regressive Model with Exogenous Inputs for an Atmospheric Plasma Spray Torch

T. Liu; M.-P. Planche; S. Deng; G. Montavon

ITSC 2014; 37-42https://doi.org/10.31399/asm.cp.itsc2014p0037

View Articletitled, Optimization of an Emulator Based on Nonlinear Auto Regressive Model with Exogenous Inputs for an Atmospheric Plasma Spray Torch

Tailoring the Spray Conditions for Suspension Plasma Spraying

A. Joulia; W. Duarte; S. Goutier; M. Vardelle; A. Vardelle; S. Rossignol

ITSC 2014; 43-47https://doi.org/10.31399/asm.cp.itsc2014p0043

View Articletitled, Tailoring the Spray Conditions for Suspension Plasma Spraying

Influence of Process Parameters and Feedstock Selection on Coating Microstructures with a Cascaded Plasma Torch

D. Chen; C. Dambra; O. Sabouni

ITSC 2014; 48-52https://doi.org/10.31399/asm.cp.itsc2014p0048

View Articletitled, Influence of Process Parameters and Feedstock Selection on Coating Microstructures with a Cascaded Plasma Torch

Influence of Welding HAZ Stresses on Adhesion Strength of APS Ceramic Coatings

J. Barr; C. Estrada; J. Harrison; B. White

ITSC 2014; 53-58https://doi.org/10.31399/asm.cp.itsc2014p0053

View Articletitled, Influence of Welding HAZ Stresses on Adhesion Strength of APS Ceramic Coatings

Plasma Spraying of Ceramics with Particular Difficulties in Processing

G. Mauer; N. Schlegel; A. Guignard; M. O. Jarligo; S. Rezanka; A. Hospach; R. Vaßen

ITSC 2014; 397-402https://doi.org/10.31399/asm.cp.itsc2014p0397

View Articletitled, Plasma Spraying of Ceramics with Particular Difficulties in Processing

Effect of Vacuum Annealing on the Microstructure and Tribological Properties of Fe-40Al Coatings Deposited by Atmospheric Plasma Spraying

B. Song; S. Dong; H. Liao; C. Coddet

ITSC 2014; 403-407https://doi.org/10.31399/asm.cp.itsc2014p0403

View Articletitled, Effect of Vacuum Annealing on the Microstructure and Tribological Properties of Fe-40Al Coatings Deposited by Atmospheric Plasma Spraying

Synthesis and Phase Stability of Scandia, Gadolinia and Ytterbia Co-Doped Zirconia for Thermal Barrier Coating Application

Q. Li; X. Cui; S. Li; W. Yang; C. Wang; Q. Cao

ITSC 2014; 408-413https://doi.org/10.31399/asm.cp.itsc2014p0408

View Articletitled, Synthesis and Phase Stability of Scandia, Gadolinia and Ytterbia Co-Doped Zirconia for Thermal Barrier Coating Application

Examination of the Origin of Intersplat Interface Debonding During Plasma Spraying of Ceramic Coating

L. Chen; G.-J. Yang; C.-X. Li; C.-J. Li

ITSC 2014; 414-419https://doi.org/10.31399/asm.cp.itsc2014p0414

View Articletitled, Examination of the Origin of Intersplat Interface Debonding During Plasma Spraying of Ceramic Coating

Cold Spray

Cold Spraying of Cu-Al-Bronze for Cavitation Protection in Marine Environments

S. Krebs; F. Gärtner; T. Klassen

ITSC 2014; 59-64https://doi.org/10.31399/asm.cp.itsc2014p0059

View Articletitled, Cold Spraying of Cu-Al-Bronze for Cavitation Protection in Marine Environments

Characterization and Optimization of Cold Sprayed Nickel and Nickel-Based Alloys on Aluminum and Steel Substrates for Corrosion Protection and High Temperature Applications

S. Lubkowitz; F. Trenkle; J. Luth; S. Hartmann

ITSC 2014; 65-68https://doi.org/10.31399/asm.cp.itsc2014p0065

View Articletitled, Characterization and Optimization of Cold Sprayed Nickel and Nickel-Based Alloys on Aluminum and Steel Substrates for Corrosion Protection and High Temperature Applications

Influence of Spray Angle on Cold Spray with Al for the Repair of Aircraft Components

Q. Blochet; F. Delloro; F. N’Guyen; F. Borit; M. Jeandin; K. Roche; G. Surdon

ITSC 2014; 69-74https://doi.org/10.31399/asm.cp.itsc2014p0069

View Articletitled, Influence of Spray Angle on Cold Spray with Al for the Repair of Aircraft Components

Integration of Electrical Functionality by Transplantation of Cold Sprayed Electrically Conductive Cu Tracks via Injection Molding

K. Bobzin; M. Öte; T. F. Linke; C. Schulz; C. Hopmann; J. Wunderle

ITSC 2014; 215-220https://doi.org/10.31399/asm.cp.itsc2014p0215

View Articletitled, Integration of Electrical Functionality by Transplantation of Cold Sprayed Electrically Conductive Cu Tracks via Injection Molding

A Morphological Approach to the Modeling of the Cold Spray Process

F. Delloro; M. Faessel; H. Proudhon; D. Jeulin; M. Jeandin; E. Meillot; L. Bianchi

ITSC 2014; 221-226https://doi.org/10.31399/asm.cp.itsc2014p0221

View Articletitled, A Morphological Approach to the Modeling of the Cold Spray Process

Interface Characterization and Bonding Mechanisms of Cold Gas Sprayed Al Coatings on Ceramic Substrates

R. Drehmann; T. Grund; T. Lampke; B. Wielage; K. Manygoats; T. Schucknecht; D. Rafaja

ITSC 2014; 379-384https://doi.org/10.31399/asm.cp.itsc2014p0379

View Articletitled, Interface Characterization and Bonding Mechanisms of Cold Gas Sprayed Al Coatings on Ceramic Substrates

Influence of Substrate Temperature on Adhesion Strength of Cold-Sprayed Coatings

Y. Watanabe; C. Yoshida; K. Atsumi; M. Yamada; M. Fukumoto

ITSC 2014; 385-390https://doi.org/10.31399/asm.cp.itsc2014p0385

View Articletitled, Influence of Substrate Temperature on Adhesion Strength of Cold-Sprayed Coatings

Properties and Comparison of WC-25/17/12Co Cold Spray Coatings onto Al7075-T6

M. Couto; S. Dosta; J. M. Guilemany; J. Putzier

ITSC 2014; 391-396https://doi.org/10.31399/asm.cp.itsc2014p0391

View Articletitled, Properties and Comparison of WC-25/17/12Co Cold Spray Coatings onto Al7075-T6

The Deposition Behavior and Bonding Features of Kinetic Sprayed Mixed Al-Ni Binary Metallic Powders

J. Kim; G. Byun; C. Lee

ITSC 2014; 695-700https://doi.org/10.31399/asm.cp.itsc2014p0695

View Articletitled, The Deposition Behavior and Bonding Features of Kinetic Sprayed Mixed Al-Ni Binary Metallic Powders

Microstructure Characterization of In-Situ Al₅Fe₂ Intermetallics Particles Reinforced Al Matrix Composite Coating by Annealing Treatment of Cold Sprayed Precursor

H.-T. Wang; X. Chen; X.-B. Bai; G.-C. Ji; Z.-X. Dong

ITSC 2014; 701-706https://doi.org/10.31399/asm.cp.itsc2014p0701

View Articletitled, Microstructure Characterization of In-Situ Al<sub>5</sub>Fe<sub>2</sub> Intermetallics Particles Reinforced Al Matrix Composite Coating by Annealing Treatment of Cold Sprayed Precursor

Micro-Scale Interface Strength Evaluation of Cold Sprayed Deposit

Y. Ichikawa; Y. Watanabe; I. Nonaka; H. Miura

ITSC 2014; 707-710https://doi.org/10.31399/asm.cp.itsc2014p0707

View Articletitled, Micro-Scale Interface Strength Evaluation of Cold Sprayed Deposit

Disorder and Bonding in Cold Spraying of Fe40Al

N. Cinca; F. Gärtner; T. Klassen; J. M. Guilemany

ITSC 2014; 711-715https://doi.org/10.31399/asm.cp.itsc2014p0711

View Articletitled, Disorder and Bonding in Cold Spraying of Fe40Al

Annealing Treatment on the Microstructure and Properties of Cold-Sprayed FeAl-40%WC Composite Coating

H.-T. Wang; X. Chen; X.-B. Bai; G.-C. Ji; Z.-X. Dong

ITSC 2014; 716-721https://doi.org/10.31399/asm.cp.itsc2014p0716

View Articletitled, Annealing Treatment on the Microstructure and Properties of Cold-Sprayed FeAl-40%WC Composite Coating

Automotive Applications

Corrosion Resistant Coatings for Cylinder Bore Applications in Passenger Car Engines

F. Ernst; D. Kube; F.-A. Xavier; J. Schmid

ITSC 2014; 75-78https://doi.org/10.31399/asm.cp.itsc2014p0075

View Articletitled, Corrosion Resistant Coatings for Cylinder Bore Applications in Passenger Car Engines

State-of-the-Art Control and Measurement Techniques for High Performance Arc Sprayed Cylinder Bore Coating in Automotive Engine Production

W. Wagener; P. Woisetschläger; A. Bauer

ITSC 2014; 79-87https://doi.org/10.31399/asm.cp.itsc2014p0079

View Articletitled, State-of-the-Art Control and Measurement Techniques for High Performance Arc Sprayed Cylinder Bore Coating in Automotive Engine Production

Study on PTWA Process and Application to Car Engine Cylinder Bores

G. Darut; H. Liao; C. Coddet; J. M. Bordes

ITSC 2014; 88-93https://doi.org/10.31399/asm.cp.itsc2014p0088

View Articletitled, Study on PTWA Process and Application to Car Engine Cylinder Bores

Quality Designed Twin Wire Arc Spraying of Aluminum Bores

J. König; M. Lahres; O. T. Methner

ITSC 2014; 227-233https://doi.org/10.31399/asm.cp.itsc2014p0227

View Articletitled, Quality Designed Twin Wire Arc Spraying of Aluminum Bores

Laser Texturing Surface Pre-Treatment Before PTWA Process Applied to Car Engine Cylinder Bores

S. Costil; G. Darut; A. Mahfoud; A. Lamraoui; J. M. Bordes

ITSC 2014; 234-238https://doi.org/10.31399/asm.cp.itsc2014p0234

View Articletitled, Laser Texturing Surface Pre-Treatment Before PTWA Process Applied to Car Engine Cylinder Bores

Investigation of HVOF-Sprayed (Ti, Mo)(C, N)-Ni Hardmetal Coatings for Static Friction Applications

L.-M. Berger; I. Shakhverdova; R. Puschmann; M. Gräfensteiner; E. Leidich; S. Schiefer; M. Gerlach

ITSC 2014; 239-245https://doi.org/10.31399/asm.cp.itsc2014p0239

View Articletitled, Investigation of HVOF-Sprayed (Ti, Mo)(C, N)-Ni Hardmetal Coatings for Static Friction Applications

Thermal Cycling Assessment of Steel-Based Thermal Barrier Coatings for Al Protection

D. Poirier; J.-M. Lamarre; J.-G. Legoux

ITSC 2014; 246-251https://doi.org/10.31399/asm.cp.itsc2014p0246

View Articletitled, Thermal Cycling Assessment of Steel-Based Thermal Barrier Coatings for Al Protection

Application and Practice of WC Cermet Sprayed Composite Coating Technology in the Hot-Dip Galvanizing Line

L. Wang

ITSC 2014; 252-256https://doi.org/10.31399/asm.cp.itsc2014p0252

View Articletitled, Application and Practice of WC Cermet Sprayed Composite Coating Technology in the Hot-Dip Galvanizing Line

Industrial Gas Turbine Applications

Thermal Sprayed Y₂O₃-Al₂O₃-SiO₂ (YAS) Coatings for Environmental Protection of SiC Ceramics

E. García; A. Nistal; M. A. Sainz; M. I. Osendi; P. Miranzo; F. Martín de la Escalera; A. Khalifa

ITSC 2014; 94-99https://doi.org/10.31399/asm.cp.itsc2014p0094

View Articletitled, Thermal Sprayed Y<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-SiO<sub>2</sub> (YAS) Coatings for Environmental Protection of SiC Ceramics

Detrimental Effects of the HVOF Process on CoNiCrAlY

M. Thoma; A. Scrivani

ITSC 2014; 100-103https://doi.org/10.31399/asm.cp.itsc2014p0100

View Articletitled, Detrimental Effects of the HVOF Process on CoNiCrAlY

Evolution of Thermal Barrier Coatings for Land Based Gas Turbines at MHI

Y. Okajima; D. Kudo; N. Okaya; T. Torigoe; H. Kaneko; M. Mega; E. Ito; J. Masada; K. Tsukagoshi

ITSC 2014; 257-262https://doi.org/10.31399/asm.cp.itsc2014p0257

View Articletitled, Evolution of Thermal Barrier Coatings for Land Based Gas Turbines at MHI

A Comparison of Microstructure and of Thermal Transport Properties of Yttria and Ceria Stabilized Zirconia Coatings Deposited by Suspension Plasma Spraying

P. Sokołowski; L. Łatka; S. Kozerski; A. Ambroziak; L. Pawłowski; B. Pateyron

ITSC 2014; 263-267https://doi.org/10.31399/asm.cp.itsc2014p0263

View Articletitled, A Comparison of Microstructure and of Thermal Transport Properties of Yttria and Ceria Stabilized Zirconia Coatings Deposited by Suspension Plasma Spraying

A Preliminary Microstructure Investigation of YSZ Coatings Deposited by Plasma Spray-Physical Vapor Deposition using a Shrouded Plasma Torch

Q.-Y. Chen; C.-J. Li; C.-X. Li; G.-J. Yang; J.-Z. Zhao

ITSC 2014; 268-272https://doi.org/10.31399/asm.cp.itsc2014p0268

View Articletitled, A Preliminary Microstructure Investigation of YSZ Coatings Deposited by Plasma Spray-Physical Vapor Deposition using a Shrouded Plasma Torch

Intermediate PVD Layers as Diffusion Barriers in Turbine Coating Systems

I. E. Ali; D. Wett; T. Grund; D. Nestler; B. Wielage; T. Lampke

ITSC 2014; 273-278https://doi.org/10.31399/asm.cp.itsc2014p0273

View Articletitled, Intermediate PVD Layers as Diffusion Barriers in Turbine Coating Systems

Comparing Thermal Spray to other Surfacing Technologies

A Case Study of the Potential of Wire Arc Spraying as a Cost Effective Alternative to Established Weld Overlay Processes

P. T. Nielsen; C. Jensen; C. Jensen; P. Bräsel

ITSC 2014; 104-108https://doi.org/10.31399/asm.cp.itsc2014p0104

View Articletitled, A Case Study of the Potential of Wire Arc Spraying as a Cost Effective Alternative to Established Weld Overlay Processes

Surface Morphology and Bioactivity of Copper Alloy Coatings

R. Shafaghi; L. Pershin; J. Mostaghimi; M. Ringuette

ITSC 2014; 109-112https://doi.org/10.31399/asm.cp.itsc2014p0109

View Articletitled, Surface Morphology and Bioactivity of Copper Alloy Coatings

Suspension Spraying

Columnar Structured Thermal Barrier Coatings (TBCs) by Suspension Plasma Spraying (SPS)

N. Schlegel; S. Ebert; G. Mauer; R. Vaßen

ITSC 2014; 113-118https://doi.org/10.31399/asm.cp.itsc2014p0113

View Articletitled, Columnar Structured Thermal Barrier Coatings (TBCs) by Suspension Plasma Spraying (SPS)

Morphology and Wetting Behavior of Atmospheric Plasma Sprayed Titanium Dioxide

N. Sharifi; M. Pugh; C. Moreau; A. Dolatabadi

ITSC 2014; 119-124https://doi.org/10.31399/asm.cp.itsc2014p0119

View Articletitled, Morphology and Wetting Behavior of Atmospheric Plasma Sprayed Titanium Dioxide

Electrocatalytic Behavior of Nickel Coatings Formed by APS and SPS Processes

M. Aghasibeig; R. Wuthrich; C. Moreau; A. Dolatabadi

ITSC 2014; 739-744https://doi.org/10.31399/asm.cp.itsc2014p0739

View Articletitled, Electrocatalytic Behavior of Nickel Coatings Formed by APS and SPS Processes

Columnar Structured Thermal Barrier Coatings Deposited by Suspension Plasma Spraying

S. Tao; X. Zhong; H. Zhao; Y. Zhao; D. Li; C. Ding

ITSC 2014; 745-750https://doi.org/10.31399/asm.cp.itsc2014p0745

View Articletitled, Columnar Structured Thermal Barrier Coatings Deposited by Suspension Plasma Spraying

Microstructural Characterization and Gas Sensing Properties of Solution Precursor Plasma-Sprayed Zinc Oxide (ZnO) Nanostructured Coatings

C. Zhang; H. Li; P. He; M. Planche; H. Liao; M. Olivier; M. Debliquy

ITSC 2014; 751-755https://doi.org/10.31399/asm.cp.itsc2014p0751

View Articletitled, Microstructural Characterization and Gas Sensing Properties of Solution Precursor Plasma-Sprayed Zinc Oxide (ZnO) Nanostructured Coatings

Young Professionals

Cold Spray Deposition of a WC-25Co Cermet onto Al7075-T6 and Carbon Steel Substrates

M. Couto; S. Dosta; J. M. Guilemany

ITSC 2014; 125-129https://doi.org/10.31399/asm.cp.itsc2014p0125

View Articletitled, Cold Spray Deposition of a WC-25Co Cermet onto Al7075-T6 and Carbon Steel Substrates

Influence of the Powder Morphology and Plasma Spray Process Parameters on the Structure and Properties of Al₂O₃ Based Plasma Sprayed Coatings

V. Matikainen; H. Koivuluoto; P. Vuoristo; J. Larjo

ITSC 2014; 130-135https://doi.org/10.31399/asm.cp.itsc2014p0130

View Articletitled, Influence of the Powder Morphology and Plasma Spray Process Parameters on the Structure and Properties of Al<sub>2</sub>O<sub>3</sub> Based Plasma Sprayed Coatings

Cold Spraying of Amorphous Cu₅₀Zr₅₀ Alloys

A. List; F. Gärtner; H. Assadi; T. Klassen; T. Mori; S. Kuroda

ITSC 2014; 136-141https://doi.org/10.31399/asm.cp.itsc2014p0136

View Articletitled, Cold Spraying of Amorphous Cu<sub>50</sub>Zr<sub>50</sub> Alloys

Transfer of Micro-Structures by Transplantation of Thermal Sprayed Coatings

P. Knödler; A. Peuker; D. Freiburg; M. Otten; K. Möhwald; D. Biermann

ITSC 2014; 142-145https://doi.org/10.31399/asm.cp.itsc2014p0142

View Articletitled, Transfer of Micro-Structures by Transplantation of Thermal Sprayed Coatings

Microstructure and High-Temperature Corrosion Behavior of Wire-Arc Sprayed Fe-Based Coatings

R. Li; D. He; Z. Zhou; G. Wang; J. Jiang

ITSC 2014; 146-156https://doi.org/10.31399/asm.cp.itsc2014p0146

View Articletitled, Microstructure and High-Temperature Corrosion Behavior of Wire-Arc Sprayed Fe-Based Coatings

Plasma Sprayed Y₂O₃ Coating on C-FRP with Aim of Development of Future Mold Materials for Integrated Circuit Encapsulation

A. Ganesan; M. Yamada; M. Fukumoto; S. Kitaoka

ITSC 2014; 157-161https://doi.org/10.31399/asm.cp.itsc2014p0157

View Articletitled, Plasma Sprayed Y<sub>2</sub>O<sub>3</sub> Coating on C-FRP with Aim of Development of Future Mold Materials for Integrated Circuit Encapsulation

Mechanical Properties of Cu-Ag Alloys Deposited by Cold Spray

P. Coddet; C. Verdy; C. Coddet; F. Debray

ITSC 2014; 162-168https://doi.org/10.31399/asm.cp.itsc2014p0162

View Articletitled, Mechanical Properties of Cu-Ag Alloys Deposited by Cold Spray

Insulating Coatings for High-Performance Electronic Components Produced by Thermal Spraying Considering Electrical and Mechanical Characteristics

M. Cichosz; F. Trenkle; S. Hartmann; J. Wilde

ITSC 2014; 169-172https://doi.org/10.31399/asm.cp.itsc2014p0169

View Articletitled, Insulating Coatings for High-Performance Electronic Components Produced by Thermal Spraying Considering Electrical and Mechanical Characteristics

Ceramic Coatings

On the Dielectric Behavior of Annealed Plasma Sprayed Forsterite and Alumina Coatings

J.-M. Lamarre; C. V. Cojocaru; J.-G. Legoux

ITSC 2014; 184-189https://doi.org/10.31399/asm.cp.itsc2014p0184

View Articletitled, On the Dielectric Behavior of Annealed Plasma Sprayed Forsterite and Alumina Coatings

Residual Stress Analysis on Thermally Sprayed Coatings by Means of Optical and Mechanical Methods

V. Martínez García; G. Pedrini; A. Killinger; R. Gadow; W. Osten

ITSC 2014; 190-195https://doi.org/10.31399/asm.cp.itsc2014p0190

View Articletitled, Residual Stress Analysis on Thermally Sprayed Coatings by Means of Optical and Mechanical Methods

Nanostructured and Conventional Cr₂O₃, TiO₂, and TiO₂-Cr₂O₃ Thermal Sprayed Coatings for Metal Seated Ball Valve Applications in Hydrometallurgy

L. Vernhes; C. Bekins; N. Lourdel; D. Poirier; R. S. Lima; D. Li; J. E. Klemberg-Sapieha

ITSC 2014; 653-667https://doi.org/10.31399/asm.cp.itsc2014p0653

View Articletitled, Nanostructured and Conventional Cr<sub>2</sub>O<sub>3</sub>, TiO<sub>2</sub>, and TiO<sub>2</sub>-Cr<sub>2</sub>O<sub>3</sub> Thermal Sprayed Coatings for Metal Seated Ball Valve Applications in Hydrometallurgy

Detonation Spraying of Hollow Microspherical Alumina Powder

V. Yu. Ulianitsky; O. P. Solonenko; A. V. Smirnov; I. S. Batraev

ITSC 2014; 668-673https://doi.org/10.31399/asm.cp.itsc2014p0668

View Articletitled, Detonation Spraying of Hollow Microspherical Alumina Powder

Investigation of Oxide Formation on Sliding Interfaces of WC-CoCr in Relation to Friction and Wear

J. A. Wesmann; R. Johnsen; N. Espallargas; J. Herland; D. Twist; H. Araki; M. Watanabe; S. Kuroda

ITSC 2014; 674-679https://doi.org/10.31399/asm.cp.itsc2014p0674

View Articletitled, Investigation of Oxide Formation on Sliding Interfaces of WC-CoCr in Relation to Friction and Wear

Optimization of High Porosity Thermal Barrier Coatings Generated with a Porosity Former

J. Medricky; M. Vilemova; T. Chraska; N. Curry; N. Markocsan

ITSC 2014; 680-685https://doi.org/10.31399/asm.cp.itsc2014p0680

View Articletitled, Optimization of High Porosity Thermal Barrier Coatings Generated with a Porosity Former

Investigation of Crack Propagation Behavior of Thermal Barrier Coatings Fabricated by Atmospheric Plasma Spraying in the Process of Uniaxial Tension Using Acoustic Emission Technique

L. Wang; X. H. Zhong; Y. X. Zhao; H.Y. Zhao; J. S. Yang; S. Y. Tao; Y. Wang

ITSC 2014; 686-694https://doi.org/10.31399/asm.cp.itsc2014p0686

View Articletitled, Investigation of Crack Propagation Behavior of Thermal Barrier Coatings Fabricated by Atmospheric Plasma Spraying in the Process of Uniaxial Tension Using Acoustic Emission Technique

Process Modeling and Simulation

Numerical Modelling of Arc Dynamics in a Conventional DC Plasma Spray Torch

M. Alaya; C. Chazelas; G. Mariaux; A. Vardelle

ITSC 2014; 196-202https://doi.org/10.31399/asm.cp.itsc2014p0196

View Articletitled, Numerical Modelling of Arc Dynamics in a Conventional DC Plasma Spray Torch

Modelling of Impact and Bonding of Inhomogeneous Particles in Cold Spraying

H. Assadi; T. Klassen; F. Gärtner; T. Nanbu; Y. Kawashita; Y. Uehara

ITSC 2014; 203-207https://doi.org/10.31399/asm.cp.itsc2014p0203

View Articletitled, Modelling of Impact and Bonding of Inhomogeneous Particles in Cold Spraying

Design of Experiment Oriented Fluid Simulation for the Virtual Improvement of the Air-Cap Configuration in Twin-Wire Arc-Spraying (TWAS) Process

W. Tillmann; M. Abdulgader; N. Anjami; L. Hagen

ITSC 2014; 208-214https://doi.org/10.31399/asm.cp.itsc2014p0208

View Articletitled, Design of Experiment Oriented Fluid Simulation for the Virtual Improvement of the Air-Cap Configuration in Twin-Wire Arc-Spraying (TWAS) Process

A Three-Dimensional Analysis of the Suspension Plasma Spray Impinging on a Flat Substrate

M. Jadidi; M. Mousavi; F. Jabbari; S. Moghtadernejad; A. Dolatabadi

ITSC 2014; 426-431https://doi.org/10.31399/asm.cp.itsc2014p0426

View Articletitled, A Three-Dimensional Analysis of the Suspension Plasma Spray Impinging on a Flat Substrate

Transient Thermal Analysis of NiCrBSi Coatings Manufactured Via Hybrid Plasma Spray Process by Finite Element Method

J. Liu; R. Bolot; S. Costil; M. P. Planche

ITSC 2014; 432-437https://doi.org/10.31399/asm.cp.itsc2014p0432

View Articletitled, Transient Thermal Analysis of NiCrBSi Coatings Manufactured Via Hybrid Plasma Spray Process by Finite Element Method

Phase Selection During Rapid Solidification of Plasma-Sprayed Alumina Splats on an Alumina Substrate

E.-J. Yang; J.-J. Xin; C.-J. Li; G.-X. Wang; G.-J. Yang

ITSC 2014; 438-443https://doi.org/10.31399/asm.cp.itsc2014p0438

View Articletitled, Phase Selection During Rapid Solidification of Plasma-Sprayed Alumina Splats on an Alumina Substrate

Effect of Pore Size on the Plasma Sprayed Coating’s Stress Distribution

W. Wang; L. Wang; Z. Yu; F. Xuan

ITSC 2014; 444-454https://doi.org/10.31399/asm.cp.itsc2014p0444

View Articletitled, Effect of Pore Size on the Plasma Sprayed Coating’s Stress Distribution

Wear Protection

The Impact and Sliding Wear Performance of Thermal Spray HVAF Thick Carbide Coatings on Steel Substrates

R Waudby; T. Suhonen; T. Varis; K. Holmberg

ITSC 2014; 279-284https://doi.org/10.31399/asm.cp.itsc2014p0279

View Articletitled, The Impact and Sliding Wear Performance of Thermal Spray HVAF Thick Carbide Coatings on Steel Substrates

Ultra-Smooth Hardface Coatings Applied by Advanced HVOF Process

X. Ma; P. Ruggiero

ITSC 2014; 285-290https://doi.org/10.31399/asm.cp.itsc2014p0285

View Articletitled, Ultra-Smooth Hardface Coatings Applied by Advanced HVOF Process

Influence of Binder Phase Content on the Microstructure and Properties of TiB₂-Ni Coatings Sprayed by HVOF

X. Chen; H. T. Wang; G. C. Ji; X. B. Bai; Z. X. Dong

ITSC 2014; 291-300https://doi.org/10.31399/asm.cp.itsc2014p0291

View Articletitled, Influence of Binder Phase Content on the Microstructure and Properties of TiB<sub>2</sub>-Ni Coatings Sprayed by HVOF

Thermal Sprayed Protective Coatings for Superplastic Forming Ceramic Dies: A Monitoring System of Die Condition

A. Staiano; W. Ion; L. O’Hare

ITSC 2014; 301-305https://doi.org/10.31399/asm.cp.itsc2014p0301

View Articletitled, Thermal Sprayed Protective Coatings for Superplastic Forming Ceramic Dies: A Monitoring System of Die Condition

High Velocity Oxy- and Air-Fuel Spraying Processes

Design of Experiment for Advanced Nanostructured WC-12Co Coating HVOF: Three-Point Bending Tests

A. A. Al-Hamed; K. Y. Benyounis; H. Y. Al-Fadhli; B. S. Yilbas; M. S. J. Hashmi; J. Stokes

ITSC 2014; 306-311https://doi.org/10.31399/asm.cp.itsc2014p0306

View Articletitled, Design of Experiment for Advanced Nanostructured WC-12Co Coating HVOF: Three-Point Bending Tests

Thermal Spray Coatings for High Temperature Corrosion Protection in Biomass Co-Fired Boilers

M. Oksa; J. Metsäjoki; J. Kärki

ITSC 2014; 312-317https://doi.org/10.31399/asm.cp.itsc2014p0312

View Articletitled, Thermal Spray Coatings for High Temperature Corrosion Protection in Biomass Co-Fired Boilers

Optimization of Grit Blasting Conditions by Supersonic Air Spraying

C. Lyphout; S. Björklund; P. Boccaccio

ITSC 2014; 318-323https://doi.org/10.31399/asm.cp.itsc2014p0318

View Articletitled, Optimization of Grit Blasting Conditions by Supersonic Air Spraying

Influence of the Handling Parameters on the Characteristics of HVOF Sprayed Coatings Processed by Means of Fine WC-12Co (2-10 µm) Powders

W. Tillmann; I. Baumann; P. Hollingsworth; M. Dildrop; A. Eilers; H. Müller; T. Wiederkehr

ITSC 2014; 324-333https://doi.org/10.31399/asm.cp.itsc2014p0324

View Articletitled, Influence of the Handling Parameters on the Characteristics of HVOF Sprayed Coatings Processed by Means of Fine WC-12Co (2-10 µm) Powders

Influence of the Spray Gun Type on Microstructure and Properties of HVAF Sprayed Fe-Based Corrosion Resistant Coatings

A. Milanti; H. Koivuluoto; P. Vuoristo

ITSC 2014; 334-339https://doi.org/10.31399/asm.cp.itsc2014p0334

View Articletitled, Influence of the Spray Gun Type on Microstructure and Properties of HVAF Sprayed Fe-Based Corrosion Resistant Coatings

Novel Industrial Applications

A 25 Year Exposure Test of Thermal Sprayed Zn, Al, and Zn-Al Coatings in Marine Environments

S. Kuroda; S. Uematus; K. Kato; Y. Ichiryu; H. Saitoh

ITSC 2014; 340-344https://doi.org/10.31399/asm.cp.itsc2014p0340

View Articletitled, A 25 Year Exposure Test of Thermal Sprayed Zn, Al, and Zn-Al Coatings in Marine Environments

Improved Efficiency in Paper Making by Thermal Spray Coatings

H. Jungklaus

ITSC 2014; 345-348https://doi.org/10.31399/asm.cp.itsc2014p0345

View Articletitled, Improved Efficiency in Paper Making by Thermal Spray Coatings

Deposition of Dense Ceramic Coatings by Detonation Spraying

V. Ulianitsky; A. Shtertser; I. Batraev; I. Smurov

ITSC 2014; 349-352https://doi.org/10.31399/asm.cp.itsc2014p0349

View Articletitled, Deposition of Dense Ceramic Coatings by Detonation Spraying

Effect of Al Enrichment by Pack Cementation of FeCr Coatings Deposited by HVOF

A. Bellucci; S. Bellini; R. Pileggi; D. Stocchi; T. Satu

ITSC 2014; 353-358https://doi.org/10.31399/asm.cp.itsc2014p0353

View Articletitled, Effect of Al Enrichment by Pack Cementation of FeCr Coatings Deposited by HVOF

Pulsed Laminar Arc Jet Associated with Phase Injection of Suspension for Coating Elaboration

J. Krowka; V. Rat; C. Chazelas; J. F. Coudert

ITSC 2014; 359-362https://doi.org/10.31399/asm.cp.itsc2014p0359

View Articletitled, Pulsed Laminar Arc Jet Associated with Phase Injection of Suspension for Coating Elaboration

Thermal Spray Powders, Wires, and Suspensions

New Composites for Electrical High Thermal Applications

D. R. Vidal; I. G. Cano; J. M. Guilemany

ITSC 2014; 363-367https://doi.org/10.31399/asm.cp.itsc2014p0363

View Articletitled, New Composites for Electrical High Thermal Applications

Demands and Economic Aspects of Thermal Spraying with Suspensions – an Overview

F.-L. Toma; L.-M. Berger; A. Potthoff; S. Langner

ITSC 2014; 368-372https://doi.org/10.31399/asm.cp.itsc2014p0368

View Articletitled, Demands and Economic Aspects of Thermal Spraying with Suspensions – an Overview

Production and Plasma Spraying of Cermet Powders TiC-NiCr with Given Volume Content of Carbide Ultra-Fine Inclusions

O. P. Solonenko; A. E. Chesnokov; A. V. Smirnov

ITSC 2014; 373-378https://doi.org/10.31399/asm.cp.itsc2014p0373

View Articletitled, Production and Plasma Spraying of Cermet Powders TiC-NiCr with Given Volume Content of Carbide Ultra-Fine Inclusions

Fuel Cell and Solar Cell Applications

Comparison of Microstructure and Properties of MCrAlY-Al₂O₃ Composite Coatings with Both Micro-Sized and Nano-Sized Ceramic Particles Deposited by Plasma Spraying, HVOF and Cold Spraying

X.-H. Tan; J.-M. Xu; Q. Li; G.-J. Yang; Y.-Y. Wang; C.-X. Li; C.-J. Li

ITSC 2014; 420-425https://doi.org/10.31399/asm.cp.itsc2014p0420

View Articletitled, Comparison of Microstructure and Properties of MCrAlY-Al<sub>2</sub>O<sub>3</sub> Composite Coatings with Both Micro-Sized and Nano-Sized Ceramic Particles Deposited by Plasma Spraying, HVOF and Cold Spraying

Arc and Laser Spraying Processes

Investigations of Technological Developments in Nozzle Design for Twin Wire Arc Spraying by Means of Spray Plume Characteristics

W. Tillmann; L. Hagen; M. Abdulgader; H. G. Rademacher; A. Schmidt; H. Müller; T. Wiederkehr

ITSC 2014; 455-460https://doi.org/10.31399/asm.cp.itsc2014p0455

View Articletitled, Investigations of Technological Developments in Nozzle Design for Twin Wire Arc Spraying by Means of Spray Plume Characteristics

Investigation of the Effect of Porosity Content on the Flexural Behavior of Nickel Foam Core Sandwich Structures with Arc Sprayed Alloy 625 Skin

S. Salavati; L. Pershin; T. W. Coyle; J. Mostaghimi

ITSC 2014; 461-466https://doi.org/10.31399/asm.cp.itsc2014p0461

View Articletitled, Investigation of the Effect of Porosity Content on the Flexural Behavior of Nickel Foam Core Sandwich Structures with Arc Sprayed Alloy 625 Skin

3D μCT and SEM Analysis of Resolidified Tips of Cored Wires Used in Twin Wire Arc Spraying

J. Nellesen; M. Abdulgader; W. Tillmann; F. Beckmann

ITSC 2014; 467-473https://doi.org/10.31399/asm.cp.itsc2014p0467

View Articletitled, 3D μCT and SEM Analysis of Resolidified Tips of Cored Wires Used in Twin Wire Arc Spraying

Study on Thermal Conductivity of Iron-Based Alloy Coatings Prepared by Wire Arc Spraying Process

J. X. Wei; R. Li; Z. Zhou; D. Y. He; J. M. Jiang; Z. H. Wang; G. H. Wang

ITSC 2014; 474-479https://doi.org/10.31399/asm.cp.itsc2014p0474

View Articletitled, Study on Thermal Conductivity of Iron-Based Alloy Coatings Prepared by Wire Arc Spraying Process

Quality, Environment, Health, and Safety

Important and in Demand Than Ever: Training and Qualification of Thermal Spray Personnel

R. Huber; A. Ohliger-Volmer

ITSC 2014; 480-484https://doi.org/10.31399/asm.cp.itsc2014p0480

View Articletitled, Important and in Demand Than Ever: Training and Qualification of Thermal Spray Personnel

Development of Thermally Sprayed Ca₂Fe₂O₅ Coatings for Thermoelectrical Applications

M. M. Barbosa; R. Puschmann; S. Thiele; F.-L. Toma; H.-P. Martin; L.-M. Berger; C. Leyens; E. Beyer; N. J. van der Laag

ITSC 2014; 485-490https://doi.org/10.31399/asm.cp.itsc2014p0485

View Articletitled, Development of Thermally Sprayed Ca<sub>2</sub>Fe<sub>2</sub>O<sub>5</sub> Coatings for Thermoelectrical Applications

Corrosion Protection for Wind Power Plants – The Influence of the Application Conditions by Thermally Spraying on the Corrosion Behaviour of ZnAl Coatings

T. Maghet; J. Maehrlein; R. Feser; T. Wilhelm; K. Klahold

ITSC 2014; 491-496https://doi.org/10.31399/asm.cp.itsc2014p0491

View Articletitled, Corrosion Protection for Wind Power Plants – The Influence of the Application Conditions by Thermally Spraying on the Corrosion Behaviour of ZnAl Coatings

Steam Power Applications

Wear Resistant HVOF Coatings for High Temperature Applications

Š. Houdková; M. Kašparová; Z. Česánek; J. Schubert

ITSC 2014; 506-512https://doi.org/10.31399/asm.cp.itsc2014p0506

View Articletitled, Wear Resistant HVOF Coatings for High Temperature Applications

Technological Approach for a Full Thermally Sprayed Thermoelectric Generator

R. Puschmann; M. M. Barbosa; S. Scheitz; L.-M. Berger; F.-L. Toma; C. Leyens; E. Beyer

ITSC 2014; 513-519https://doi.org/10.31399/asm.cp.itsc2014p0513

View Articletitled, Technological Approach for a Full Thermally Sprayed Thermoelectric Generator

New Thermal Spray Processes

Atmospheric Plasmadynamic System in Thermal Spraying and Hardening

Yu. Chivel

ITSC 2014; 520-524https://doi.org/10.31399/asm.cp.itsc2014p0520

View Articletitled, Atmospheric Plasmadynamic System in Thermal Spraying and Hardening

Chemical Reactions of Different Types in Detonation Sprayed Powders as Tools of Coating Design

V. Yu. Ulianitsky; I. S. Batraev; D. V. Dudina; N. V. Bulina

ITSC 2014; 525-530https://doi.org/10.31399/asm.cp.itsc2014p0525

View Articletitled, Chemical Reactions of Different Types in Detonation Sprayed Powders as Tools of Coating Design

Microstructure and Fundamental Properties of Low Temperature HVOF Sprayed WC-10Co4Cr Coatings

J.-F. Zhang; C.-M. Deng; M. Liu; K.-S. Zhou; J. Huang; T. Han

ITSC 2014; 531-534https://doi.org/10.31399/asm.cp.itsc2014p0531

View Articletitled, Microstructure and Fundamental Properties of Low Temperature HVOF Sprayed WC-10Co4Cr Coatings

Medical Applications

Mechanical Study of Novel VPS-Titanium Coating on Polyethylene Substrates

G. Wolinne; M. Jeandin; L. Corté; S. Ruch; A. Salito

ITSC 2014; 535-540https://doi.org/10.31399/asm.cp.itsc2014p0535

View Articletitled, Mechanical Study of Novel VPS-Titanium Coating on Polyethylene Substrates

Effects of Al Content and Addition of Third Element on Fabrication of Ti-Al Intermetallic Coatings by Heat Treatment of Warm Sprayed Precursors

J. Sienkiewicz; S. Kuroda; K. Minagawa; H. Murakami; H. Araki; K. J. Kurzydłowski

ITSC 2014; 722-727https://doi.org/10.31399/asm.cp.itsc2014p0722

View Articletitled, Effects of Al Content and Addition of Third Element on Fabrication of Ti-Al Intermetallic Coatings by Heat Treatment of Warm Sprayed Precursors

Improvement of Delamination Resistant Properties for Thermal Barrier Coatings by Formation of Wedge-Like Thermally Grown Oxide

S. Hatta; K. Ogawa; T. Takanezawa; H. Yamazaki

ITSC 2014; 728-732https://doi.org/10.31399/asm.cp.itsc2014p0728

View Articletitled, Improvement of Delamination Resistant Properties for Thermal Barrier Coatings by Formation of Wedge-Like Thermally Grown Oxide

Numerical Simulation of the Minimal Bonding Strength to Overcome Rebounding in Cold Spraying Cu/Cu

K. Wang; L. Kong; X. Cui; Y. Tao; T. Li; T. Xiong

ITSC 2014; 733-738https://doi.org/10.31399/asm.cp.itsc2014p0733

View Articletitled, Numerical Simulation of the Minimal Bonding Strength to Overcome Rebounding in Cold Spraying Cu/Cu

Corrosion Protection

Spray Plasma Processed ZrB₂-Based Coatings for Oxidation Protection

C. Barré; A. Quet; L. Bianchi; C. Sanchez; A. Sauveroche

ITSC 2014; 541-545https://doi.org/10.31399/asm.cp.itsc2014p0541

View Articletitled, Spray Plasma Processed ZrB<sub>2</sub>-Based Coatings for Oxidation Protection

Enhancing High Temperature Erosion-Corrosion Resistance of SA213-T91 Steel by HVOF Sprayed Nano-Structured Ni-20Cr Coating

M. Kumar; H. Singh; N. Singh

ITSC 2014; 546-550https://doi.org/10.31399/asm.cp.itsc2014p0546

View Articletitled, Enhancing High Temperature Erosion-Corrosion Resistance of SA213-T91 Steel by HVOF Sprayed Nano-Structured Ni-20Cr Coating

Performance of D-Gun Sprayed Coatings in Na₂SO₄-60%V₂O₅ Environment at 900 °C

G. Kaushal; H. Singh; S. Prakash

ITSC 2014; 551-555https://doi.org/10.31399/asm.cp.itsc2014p0551

View Articletitled, Performance of D-Gun Sprayed Coatings in Na<sub>2</sub>SO<sub>4</sub>-60%V<sub>2</sub>O<sub>5</sub> Environment at 900 °C

Preparation and Characterization of WC/Co-W-C Cermet Coatings with Molten Zinc Corrosion Resistance by HVOF Spraying of Bimodal-Structured WC/Co Powder

J.-M. Xu; X.-H. Tan; Q. Wang; Q. Li; G.-J. Yang; Y.-Y. Wang; C.-X. Li; C.-J. Li

ITSC 2014; 556-561https://doi.org/10.31399/asm.cp.itsc2014p0556

View Articletitled, Preparation and Characterization of WC/Co-W-C Cermet Coatings with Molten Zinc Corrosion Resistance by HVOF Spraying of Bimodal-Structured WC/Co Powder

Tribological Coatings

New Types of Self-Lubricated Thermal Spray Coatings: The Use of Liquid Lubricants in a Metal Matrix

N. Espallargas; S. Armada

ITSC 2014; 562-567https://doi.org/10.31399/asm.cp.itsc2014p0562

View Articletitled, New Types of Self-Lubricated Thermal Spray Coatings: The Use of Liquid Lubricants in a Metal Matrix

Multiscale Modelling of Microstructural Defects and Influence on Mechanical Properties and Wear Resistance of Thermal Spray Coatings

A. Laukkanen; T. Varis; T. Suhonen; J. Metsäjoki; T. Andersson; T. Laitinen

ITSC 2014; 568-571https://doi.org/10.31399/asm.cp.itsc2014p0568

View Articletitled, Multiscale Modelling of Microstructural Defects and Influence on Mechanical Properties and Wear Resistance of Thermal Spray Coatings

Performance Analysis of Hard Coatings Applied by Different Processes on Carbon Steel

C. R. C. Lima; R. Libardi; F. Camargo; M. A. R. Mojena; H. C. Fals; V. A. Ferraresi

ITSC 2014; 572-576https://doi.org/10.31399/asm.cp.itsc2014p0572

View Articletitled, Performance Analysis of Hard Coatings Applied by Different Processes on Carbon Steel

Influence of Cold, Warm and Plasma Sprayed Layers on High-Cycle Fatigue Properties of Steel Specimens

J. Cizek; M. Matejkova; I. Dlouhy; C. M Kay; J. Karthikeyan; S. Kuroda; O. Kovarik; J. Siegl; K. A. Khor

ITSC 2014; 577-581https://doi.org/10.31399/asm.cp.itsc2014p0577

View Articletitled, Influence of Cold, Warm and Plasma Sprayed Layers on High-Cycle Fatigue Properties of Steel Specimens

Effects of Feedstock Shape on the Qualities of Cold-Sprayed Cu Coatings

K. Ko; J. Choi; H. Lee; H. Lee

ITSC 2014; 582-587https://doi.org/10.31399/asm.cp.itsc2014p0582

View Articletitled, Effects of Feedstock Shape on the Qualities of Cold-Sprayed Cu Coatings

Pre- and Post-Process Treatments

Application of Dry-Ice Blasting in High-Velocity Oxyfuel Process for Deposition of Thick WC-Co Coating

S. Dong; B. Song; B. Hansz; H. Liao; C. Coddet

ITSC 2014; 588-592https://doi.org/10.31399/asm.cp.itsc2014p0588

View Articletitled, Application of Dry-Ice Blasting in High-Velocity Oxyfuel Process for Deposition of Thick WC-Co Coating

Plasma Sprayed Ce:YAG

P. Ctibor; J. Kubát; Z. Pala; B. Nevrlá

ITSC 2014; 593-598https://doi.org/10.31399/asm.cp.itsc2014p0593

View Articletitled, Plasma Sprayed Ce:YAG

Surface Roughness of Plasma Sprayed Coatings: A Statistical Approach

J. A. Gan; C. C. Berndt

ITSC 2014; 599-604https://doi.org/10.31399/asm.cp.itsc2014p0599

View Articletitled, Surface Roughness of Plasma Sprayed Coatings: A Statistical Approach

Effects of Spray Parameters and Heat Treatment on the Microstructure and Mechanical Properties of Titanium Coatings Formed by Warm Spraying

R. Molak; S. Kuroda; H. Araki; M. Watanabe; H. Katanoda; N. Ohno; H. Fukanuma

ITSC 2014; 605-610https://doi.org/10.31399/asm.cp.itsc2014p0605

View Articletitled, Effects of Spray Parameters and Heat Treatment on the Microstructure and Mechanical Properties of Titanium Coatings Formed by Warm Spraying

The Effect of Severe Shot Peening as Pre/Post Treatment on Fatigue Behavior of Cold Spray Coating

A. Moridi; S. M. Hassani-Gangaraj; S. Vezzu; M. Guagliano

ITSC 2014; 611-616https://doi.org/10.31399/asm.cp.itsc2014p0611

View Articletitled, The Effect of Severe Shot Peening as Pre/Post Treatment on Fatigue Behavior of Cold Spray Coating

Post-Treatment of Plasma Sprayed Amorphous Ceramic Coatings by Spark Plasma Sintering

T. Chraska; J. Medřický; R. Mušálek; M. Vilémová; Z. Pala; J. Cinert

ITSC 2014; 617-622https://doi.org/10.31399/asm.cp.itsc2014p0617

View Articletitled, Post-Treatment of Plasma Sprayed Amorphous Ceramic Coatings by Spark Plasma Sintering

Process Diagnostics, Sensors, and Controls

Tomographic Particle Localization and Velocity Measurement

S. Kirner; G. Forster; J. Schein

ITSC 2014; 623-628https://doi.org/10.31399/asm.cp.itsc2014p0623

View Articletitled, Tomographic Particle Localization and Velocity Measurement

Modeling the Gas Flow and Coating Particles in the Hydrogen Fueled HVOF Process

T. Pinomaa; T. Suhonen; T. Varis

ITSC 2014; 629-633https://doi.org/10.31399/asm.cp.itsc2014p0629

View Articletitled, Modeling the Gas Flow and Coating Particles in the Hydrogen Fueled HVOF Process

Laser Diagnostic Techniques for Suspension and Solution Plasma Spraying

S. Goutier; J. Varin; W. Duarte; A. Joulia; M. Vardelle

ITSC 2014; 634-640https://doi.org/10.31399/asm.cp.itsc2014p0634

View Articletitled, Laser Diagnostic Techniques for Suspension and Solution Plasma Spraying

3D Thickness Measurement of Layer Buildup During Twin Wire Arc Spraying Process

W. Tillmann; H.-G. Rademacher; R. Zielke; M. Abdulgader; L. Hagen; B. Rüther

ITSC 2014; 641-647https://doi.org/10.31399/asm.cp.itsc2014p0641

View Articletitled, 3D Thickness Measurement of Layer Buildup During Twin Wire Arc Spraying Process

Development of Velocity Measurement Methods for Cold Sprayed Particle Clusters Using Particle Image Velocimetry Techniques

K. Sakata; K. Tagomori; N. Sugiyama; S. Sasaki; Y. Shinya; M. Yasuki; H. Sasaki; T. Nanbu; K. Takashima; H. Katanoda

ITSC 2014; 648-652https://doi.org/10.31399/asm.cp.itsc2014p0648

View Articletitled, Development of Velocity Measurement Methods for Cold Sprayed Particle Clusters Using Particle Image Velocimetry Techniques

Poster Session: Automotive Applications

Researches Regarding the Structure Investigations on New Materials of the Composite Type

A. A. Cernaianu

ITSC 2014; 756-762https://doi.org/10.31399/asm.cp.itsc2014p0756

View Articletitled, Researches Regarding the Structure Investigations on New Materials of the Composite Type

Poster Session: Aerospace Applications

The Influence of the Pass Number on the Abradability of Al-Based Coating

Y. Yu; J. Liu; J. Shen; T. Liu

ITSC 2014; 763-767https://doi.org/10.31399/asm.cp.itsc2014p0763

View Articletitled, The Influence of the Pass Number on the Abradability of Al-Based Coating

Poster Session: Fuel Cell and Solar Cell Applications

Microstructure and Properties of Suspension Plasma Sprayed SrTiO₃-Based Anodes for Intermediate-Temperature Solid Oxide Fuel Cells

S.-L. Zhang; C.-X. Li; C.-J. Li

ITSC 2014; 768-773https://doi.org/10.31399/asm.cp.itsc2014p0768

View Articletitled, Microstructure and Properties of Suspension Plasma Sprayed SrTiO<sub>3</sub>-Based Anodes for Intermediate-Temperature Solid Oxide Fuel Cells

Applications: Power Generation – Industrial Gas Turbines

Multi-Scale Multi-Points Inter-Splat Connection Enhanced Sintering Model for Plasma-Sprayed Lamellar TBCs

H. Xie; G.-J. Yang; C.-X. Li; C.-J. Li

ITSC 2014; 774-780https://doi.org/10.31399/asm.cp.itsc2014p0774

View Articletitled, Multi-Scale Multi-Points Inter-Splat Connection Enhanced Sintering Model for Plasma-Sprayed Lamellar TBCs

Healing of the Interface Between Splashed Particles and Underlying Bulk Coating and Its Influence on Isothermal Oxidation Behavior of LPPS MCrAlY Bond Coat

B.-Y. Zhang; J. Shi; G.-J. Yang; C.-X. Li; C.-J. Li

ITSC 2014; 781-787https://doi.org/10.31399/asm.cp.itsc2014p0781

View Articletitled, Healing of the Interface Between Splashed Particles and Underlying Bulk Coating and Its Influence on Isothermal Oxidation Behavior of LPPS MCrAlY Bond Coat

Examination of the Characteristics of Residual Pores in High Temperature Sintered Plasma-Sprayed La₂Zr₂O₇ Coatings

T. Liu; X. Chen; G.-J. Yang; C.-X. Li; C.-J. Li

ITSC 2014; 788-793https://doi.org/10.31399/asm.cp.itsc2014p0788

View Articletitled, Examination of the Characteristics of Residual Pores in High Temperature Sintered Plasma-Sprayed La<sub>2</sub>Zr<sub>2</sub>O<sub>7</sub> Coatings

The Influence of Temperature Gradient on Thermal Cyclic Lifetime of Plasma-Sprayed Thermal Barrier Coatings

H. Dong; G.-J. Yang; H. Ding; C.-X. Li; C.-J. Li

ITSC 2014; 794-798https://doi.org/10.31399/asm.cp.itsc2014p0794

View Articletitled, The Influence of Temperature Gradient on Thermal Cyclic Lifetime of Plasma-Sprayed Thermal Barrier Coatings

Poster Session: Quality, Environment, Health, and Safety

Workplace Exposure to Nickel During Thermal Spraying Processes

M. A. Blättler; C. Pletscher; D. Miedinger; M. Koller

ITSC 2014; 799-800https://doi.org/10.31399/asm.cp.itsc2014p0799

View Articletitled, Workplace Exposure to Nickel During Thermal Spraying Processes

Poster Session: Thermal Spray Gases

The Analysis of Possible Application of Different Working Gases in Cold Gas Spray Method: Dynamics and Temperatures of Particles

A. Małachowska; A. Ambroziak; B. Pateyron; L. Pawłowski

ITSC 2014; 801-805https://doi.org/10.31399/asm.cp.itsc2014p0801

View Articletitled, The Analysis of Possible Application of Different Working Gases in Cold Gas Spray Method: Dynamics and Temperatures of Particles

Poster Session: Thermal Spray Powders, Wires, and Suspensions

Influence of Cr₃C₂-NiCr Feedstock Powder Characteristics on Deposition Efficiency, Coating Microstructure, and Abrasion Wear Resistance

L.-M. Berger; S. Thiele; T. Börner; L. Janka; M. Rodriguez Ripoll

ITSC 2014; 806-812https://doi.org/10.31399/asm.cp.itsc2014p0806

View Articletitled, Influence of Cr<sub>3</sub>C<sub>2</sub>-NiCr Feedstock Powder Characteristics on Deposition Efficiency, Coating Microstructure, and Abrasion Wear Resistance

Poster Session: Process Diagnostics, Sensors, and Controls

Process Control of Thermal Spraying Processes by Means of Acoustic Emission Analysis

W. Tillmann; M. Abdulgader; G. Wang; R. Zielke

ITSC 2014; 813-818https://doi.org/10.31399/asm.cp.itsc2014p0813

View Articletitled, Process Control of Thermal Spraying Processes by Means of Acoustic Emission Analysis

Poster Session: Ceramic Coatings

Dielectric Properties of Al₂O₃ Coatings Deposited via Atmospheric Plasma Spraying and Dry-Ice Blasting Correlated with Microstructural Characteristics

S. Dong; B. Song; C. J. Li; H. Liao; C. Coddet

ITSC 2014; 819-823https://doi.org/10.31399/asm.cp.itsc2014p0819

View Articletitled, Dielectric Properties of Al<sub>2</sub>O<sub>3</sub> Coatings Deposited via Atmospheric Plasma Spraying and Dry-Ice Blasting Correlated with Microstructural Characteristics

Comparison of Alumina-Titania Coatings Deposited by Plasma and HVOF Spray Techniques

R. Trache; L.-M. Berger; C. Leyens

ITSC 2014; 824-829https://doi.org/10.31399/asm.cp.itsc2014p0824

View Articletitled, Comparison of Alumina-Titania Coatings Deposited by Plasma and HVOF Spray Techniques

Poster Session: Corrosion Protection

Mitigating Localized Corrosion Using Thermally Sprayed Aluminium Coatings on Welded 25% Cr Superduplex Stainless Steel

S. Paul; Q. Lu

ITSC 2014; 830-835https://doi.org/10.31399/asm.cp.itsc2014p0830

View Articletitled, Mitigating Localized Corrosion Using Thermally Sprayed Aluminium Coatings on Welded 25% Cr Superduplex Stainless Steel

Building a High Temperature Corrosion and Erosion Model for Thermal Spray Coatings

J. Metsäjoki; M. Oksa; J. Vaari; K. Penttilä; A. Laukkanen

ITSC 2014; 836-841https://doi.org/10.31399/asm.cp.itsc2014p0836

View Articletitled, Building a High Temperature Corrosion and Erosion Model for Thermal Spray Coatings

Poster Session: Metal Coatings

Heat-Treatment of Cold Sprayed Al/Ti Coating on γ-TiAl Alloy

J. Wang; L. Kong; T. Li; T. Xiong

ITSC 2014; 842-844https://doi.org/10.31399/asm.cp.itsc2014p0842

View Articletitled, Heat-Treatment of Cold Sprayed Al/Ti Coating on γ-TiAl Alloy

Properties and Micro-Structure Analysis of Cu-Cr-Zr Alloy Coating

G. Ma; L. Kong; Y. Liang; T. Li; T. Xiong

ITSC 2014; 845-848https://doi.org/10.31399/asm.cp.itsc2014p0845

View Articletitled, Properties and Micro-Structure Analysis of Cu-Cr-Zr Alloy Coating

Improvements in MMC Coatings – Influence of Powder Preparation (Mixture or Ball Milling) and Powder Size on the Coating Behavior

S. Costil; T. Baur; D. Aussavy; G. Montavon; O. El-kedim; A.-F. Bonnot

ITSC 2014; 849-854https://doi.org/10.31399/asm.cp.itsc2014p0849

View Articletitled, Improvements in MMC Coatings – Influence of Powder Preparation (Mixture or Ball Milling) and Powder Size on the Coating Behavior

Formation of Secondary Phases in Tunnel Plasma Sprayed Metallic Glass Coatings and Their Role on Properties

S. Yugeswaran; A. Kobayshi; T. W. Coyle; J. Mostaghimi

ITSC 2014; 855-859https://doi.org/10.31399/asm.cp.itsc2014p0855

View Articletitled, Formation of Secondary Phases in Tunnel Plasma Sprayed Metallic Glass Coatings and Their Role on Properties

The Research of Arc Sprayed Coatings Tribological Properties

J. Gargasas; A. Vaclovas Valiulis; I. Gedzevicius; H. Pokhmurska; B. Wielage; T. Lampke; R. Rosert

ITSC 2014; 860-865https://doi.org/10.31399/asm.cp.itsc2014p0860

View Articletitled, The Research of Arc Sprayed Coatings Tribological Properties

Poster Session: Nanomaterial Coatings

Effect of Substrate Hardness and Gas Temperature on Deposition Behavior of Nanostructured WC-23Co Particles in Cold Spraying Process

X. Chen; H. T. Wang; G. C. Ji; X. B. Bai; Z. X. Dong

ITSC 2014; 866-873https://doi.org/10.31399/asm.cp.itsc2014p0866

View Articletitled, Effect of Substrate Hardness and Gas Temperature on Deposition Behavior of Nanostructured WC-23Co Particles in Cold Spraying Process

Poster Session: Properties, Characterization, and Testing

Comparison of Metastable Austenite Type Structure of Fe-Based Coatings Produced by Arc Spraying and Surfacing

Yu. Korobov; M. Filippov; A. Makarov; I. Zabolotski; Yu. Khudorozhkova; G. Rimer

ITSC 2014; 874-879https://doi.org/10.31399/asm.cp.itsc2014p0874

View Articletitled, Comparison of Metastable Austenite Type Structure of Fe-Based Coatings Produced by Arc Spraying and Surfacing

Fatigue Performance of TBC on Structural Steel Exposed to Cyclic Bending

R. Musalek; O. Kovarik; J. Medricky; N. Curry; S. Bjorklund; P. Nylen

ITSC 2014; 880-885https://doi.org/10.31399/asm.cp.itsc2014p0880

View Articletitled, Fatigue Performance of TBC on Structural Steel Exposed to Cyclic Bending

X-Ray Micro-Tomography and Modeling of Cold-Sprayed Coated Powders

F. Delloro; M. Faessel; H. Proudhon; D. Jeulin; M. Jeandin; E. Meillot; L. Bianchi

ITSC 2014; 886-891https://doi.org/10.31399/asm.cp.itsc2014p0886

View Articletitled, X-Ray Micro-Tomography and Modeling of Cold-Sprayed Coated Powders

Poster Session: Tribological Coatings

In Situ Wear Test on Thermal Spray Coatings in a Large Chamber Scanning Electron Microscope

W. Tillmann; W. Luo; U. Selvadurai

ITSC 2014; 892-898https://doi.org/10.31399/asm.cp.itsc2014p0892

View Articletitled, In Situ Wear Test on Thermal Spray Coatings in a Large Chamber Scanning Electron Microscope

Poster Session: Wear Protection

Solid Abrasive Wear Behavior of Cr₃C₂-20(NiCr) Deposited by HVOF

E. Altuncu; F. Ustel

ITSC 2014; 899-902https://doi.org/10.31399/asm.cp.itsc2014p0899

View Articletitled, Solid Abrasive Wear Behavior of Cr<sub>3</sub>C<sub>2</sub>-20(NiCr) Deposited by HVOF

Poster Session: Cold Spray

Influence of Cold-Sprayed Al/Ti Deposition on High-Temperature Oxidation and Mechanical Properties Deterioration of Ti-Al-Nb Intermetallic Substrates

J. Cizek; O. Man; I. Dlouhy

ITSC 2014; 903-907https://doi.org/10.31399/asm.cp.itsc2014p0903

View Articletitled, Influence of Cold-Sprayed Al/Ti Deposition on High-Temperature Oxidation and Mechanical Properties Deterioration of Ti-Al-Nb Intermetallic Substrates

Formation of Intermetallic Phases in Fe-Al Binary Cold Spray Thick Deposit

V. Jan; L. Páleníková; J. Čupera; J. Čížek

ITSC 2014; 908-911https://doi.org/10.31399/asm.cp.itsc2014p0908

View Articletitled, Formation of Intermetallic Phases in Fe-Al Binary Cold Spray Thick Deposit

Effect of SiC Particle Size and Methods for Preparing Powder on the Microstructure of Cold Spray Al5056/SiC_p Composite Coatings

S. Gojon; C. Verdy; H. Liao; O. El Kedim

ITSC 2014; 912-917https://doi.org/10.31399/asm.cp.itsc2014p0912

View Articletitled, Effect of SiC Particle Size and Methods for Preparing Powder on the Microstructure of Cold Spray Al5056/SiC<sub>p</sub> Composite Coatings

Cold Spray Deposition of a Core-Shell Structured WC-Co Coating

X.-T. Luo; C.-X. Li; G.-J. Yang; C.-J. Li

ITSC 2014; 918-922https://doi.org/10.31399/asm.cp.itsc2014p0918

View Articletitled, Cold Spray Deposition of a Core-Shell Structured WC-Co Coating

Novel In-Situ Gradient Heat Treatment During Cold Spray

Y. Zeralli; G. Rolland; M. Jeandin; C. Bourda; F. Rambaud

ITSC 2014; 923-928https://doi.org/10.31399/asm.cp.itsc2014p0923

View Articletitled, Novel In-Situ Gradient Heat Treatment During Cold Spray

Single Impact Bonding of Cold Sprayed Ti6Al4V Powders Onto Different Substrates

M. Villa Vidaller; S. Dosta; J. M. Guilemany; F. Gärtner; A. List; T. Klassen

ITSC 2014; 929-934https://doi.org/10.31399/asm.cp.itsc2014p0929

View Articletitled, Single Impact Bonding of Cold Sprayed Ti6Al4V Powders Onto Different Substrates

Properties of High Thickness Al Coatings Obtained by Cold Gas Spray to Repair Light Alloy Components

J. Bedoya; S. Dosta; I. G. Cano; J. M. Guilemany

ITSC 2014; 935-939https://doi.org/10.31399/asm.cp.itsc2014p0935

View Articletitled, Properties of High Thickness Al Coatings Obtained by Cold Gas Spray to Repair Light Alloy Components

Cold Spray Deposition on Inner Side of Pipe with Aid of Radial Supersonic Nozzle

S. V. Klinkov; V. F. Kosarev; V. N. Zaikovskii

ITSC 2014; 940-945https://doi.org/10.31399/asm.cp.itsc2014p0940

View Articletitled, Cold Spray Deposition on Inner Side of Pipe with Aid of Radial Supersonic Nozzle

Poster Session: High Velocity Oxy- and Air-Fuel Spraying Processes

PIV Measurement and Numerical Simulation of the Particle Velocity in a HVAF Spray

H. Katanoda; K. Sakata; K. Tagomori; N. Sugiyama; S. Sasaki; Y. Shinya; M. Yasuki; H. Sasaki; T. Nanbu; K. Takashima

ITSC 2014; 946-949https://doi.org/10.31399/asm.cp.itsc2014p0946

View Articletitled, PIV Measurement and Numerical Simulation of the Particle Velocity in a HVAF Spray

Adaption of the Path Strategy to Produce Near Net Shape Coatings Manufactured by HVOF Spraying

W. Tillmann; P. Hollingsworth; I. Baumann; D. Hegels; T. Wiederkehr; H. Müller; B. Johnen; B. Kuhlenkötter

ITSC 2014; 950-955https://doi.org/10.31399/asm.cp.itsc2014p0950

View Articletitled, Adaption of the Path Strategy to Produce Near Net Shape Coatings Manufactured by HVOF Spraying

Optimization of WC-Based HVAF-Sprayed Coatings for Alternative to Hard Chromium: Role of Carbides, Grain Size, and Mean Free Path in Coating Wear and Corrosion Properties

C. Lyphout; K. Sato

ITSC 2014; 956-961https://doi.org/10.31399/asm.cp.itsc2014p0956

View Articletitled, Optimization of WC-Based HVAF-Sprayed Coatings for Alternative to Hard Chromium: Role of Carbides, Grain Size, and Mean Free Path in Coating Wear and Corrosion Properties

Internal Diameter HVAF Spraying for Wear and Corrosion Applications

C. Lyphout; S. Björklund

ITSC 2014; 962-967https://doi.org/10.31399/asm.cp.itsc2014p0962

View Articletitled, Internal Diameter HVAF Spraying for Wear and Corrosion Applications

Mechanical Properties of Hastelloy C-276 Coating Sprayed by HVOF Technology

M. Prantnerová; Š. Houdková; Z. Česánek; J. Schubert

ITSC 2014; 968-972https://doi.org/10.31399/asm.cp.itsc2014p0968

View Articletitled, Mechanical Properties of Hastelloy C-276 Coating Sprayed by HVOF Technology

Poster Session: Process Modeling and Simulation

Computer Modeling of Cermet Coatings Evolution Under Pulsed High-Energy Post-Treatment

O. P. Solonenko; A. A. Golovin

ITSC 2014; 973-978https://doi.org/10.31399/asm.cp.itsc2014p0973

View Articletitled, Computer Modeling of Cermet Coatings Evolution Under Pulsed High-Energy Post-Treatment

Poster Session: New Thermal Spray Processes

A Plasma Torch Designed for Low Pressure Plasma Spraying and Formation of Yttria Stabilized Zirconia Coatings

C. Q. Sun; Y. Gao; D. M. Yang

ITSC 2014; 979-984https://doi.org/10.31399/asm.cp.itsc2014p0979

View Articletitled, A Plasma Torch Designed for Low Pressure Plasma Spraying and Formation of Yttria Stabilized Zirconia Coatings

Binary Fuel Detonation Spraying of WC-Co

V. Ulianitsky; I. Batraev; I. Smurov; A. Nikulina

ITSC 2014; 985-988https://doi.org/10.31399/asm.cp.itsc2014p0985

View Articletitled, Binary Fuel Detonation Spraying of WC-Co

Poster Session: Plasma Spraying

A TEM Study of the Bonded Splat Interface Microstructure of Plasma-Sprayed YSZ Coating

E.-J. Yang; G.-J. Yang; C.-X. Li; C.-J. Li

ITSC 2014; 989-993https://doi.org/10.31399/asm.cp.itsc2014p0989

View Articletitled, A TEM Study of the Bonded Splat Interface Microstructure of Plasma-Sprayed YSZ Coating

Poster Session: Suspension Spraying Processes

Tribological Performance of Nanostructured TiO₂ Coatings Prepared by Suspension HVOF Spraying

F. F. Zhang; S. C. Wang; B. Robinson; A. Tabecki; H. L. de Villiers-Lovelock; R. J. K. Wood

ITSC 2014; 994-999https://doi.org/10.31399/asm.cp.itsc2014p0994

View Articletitled, Tribological Performance of Nanostructured TiO<sub>2</sub> Coatings Prepared by Suspension HVOF Spraying

Parametric Study on Coating Development using Perovskite Solution Precursor

I. Georgiopoulos; E. Marathoniti; N. Vourdas; C. Andreouli; V. Stathopoulos

ITSC 2014; 1000-1004https://doi.org/10.31399/asm.cp.itsc2014p1000

View Articletitled, Parametric Study on Coating Development using Perovskite Solution Precursor

Volume Information

Preface

ITSC 2014; ivhttps://doi.org/10.31399/asm.cp.itsc2014fm01

View Articletitled, Preface