Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2012: Proceedings from the International Thermal Spray Conference

Advanced Thermal Spray Coatings

Temperature Measurements of Polymer Composite Flat Plates Coated with Aluminum-12Silicon

D. Therrien; A. McDonald; P. Mertiny

ITSC 2012; 1-6https://doi.org/10.31399/asm.cp.itsc2012p0001

View Articletitled, Temperature Measurements of Polymer Composite Flat Plates Coated with Aluminum-12Silicon

Microstructure Characteristics and Oxidation Behavior of Molybdenum Disilicide Coatings Prepared by Low Pressure Plasma Spraying

Y. Niu; X. Fei; H. Wang; X. Zheng; C. Ding

ITSC 2012; 7-11https://doi.org/10.31399/asm.cp.itsc2012p0007

View Articletitled, Microstructure Characteristics and Oxidation Behavior of Molybdenum Disilicide Coatings Prepared by Low Pressure Plasma Spraying

Influence of Parameter Variations on WC-Co Splat Formation in an HVOF Process Using a New Beam-Cutter Device

W. Tillmann; B. Hussong; T. Priggemeier; S. Kuhnt; N. Rudak; H. Weinert

ITSC 2012; 12-21https://doi.org/10.31399/asm.cp.itsc2012p0012

View Articletitled, Influence of Parameter Variations on WC-Co Splat Formation in an HVOF Process Using a New Beam-Cutter Device

Engineering HVOF-Sprayed Cr₃C₂-NiCr Coatings: The Effect of Particle Morphology and Spraying Parameters on the Microstructure, Properties and High Temperature Wear Performance

D. Poirier; J.-G. Legoux; R. S. Lima

ITSC 2012; 22-27https://doi.org/10.31399/asm.cp.itsc2012p0022

View Articletitled, Engineering HVOF-Sprayed Cr<sub>3</sub>C<sub>2</sub>-NiCr Coatings: The Effect of Particle Morphology and Spraying Parameters on the Microstructure, Properties and High Temperature Wear Performance

Influence of Processes and Parameters on the Microstructure and Properties of Thermal Barrier Coatings Produced with a Nanostructured YSZ Powder

K. Bobzin; L. Zhao; N. Kopp; T. Warda

ITSC 2012; 28-33https://doi.org/10.31399/asm.cp.itsc2012p0028

View Articletitled, Influence of Processes and Parameters on the Microstructure and Properties of Thermal Barrier Coatings Produced with a Nanostructured YSZ Powder

Preparation of Al/SiC Composite Coatings on the Surface of Aluminum Alloy through Atmospheric Plasma Spraying

Jianping Li; Lei Li; Zhong Yang; Yongchun Guo; Peihu Gao

ITSC 2012; 34-39https://doi.org/10.31399/asm.cp.itsc2012p0034

View Articletitled, Preparation of Al/SiC Composite Coatings on the Surface of Aluminum Alloy through Atmospheric Plasma Spraying

Recent Development of Porous Materials and Structured Surface Fabrication by Spray Deposition of Surface-Molten Particles

Chang-Jiu Li; Guan-Jun Yang; Cheng-Xin Li

ITSC 2012; 40-46https://doi.org/10.31399/asm.cp.itsc2012p0040

View Articletitled, Recent Development of Porous Materials and Structured Surface Fabrication by Spray Deposition of Surface-Molten Particles

Development of the Particle Interface Bonding in Thermal Spray Coatings for Expanding High Performance Applications

Chang-Jiu Li; Guan-Jun Yang; Cheng-Xin Li

ITSC 2012; 47-57https://doi.org/10.31399/asm.cp.itsc2012p0047

View Articletitled, Development of the Particle Interface Bonding in Thermal Spray Coatings for Expanding High Performance Applications

Double Rare-Earth Oxides Co-Doped Strontium Zirconate as a New Thermal Barrier Coating Material

H.-Y. Dong; D.-X. Wang; W.-S. Lun; W.-Y. He; W. Ma; X.-B. Zheng

ITSC 2012; 58-63https://doi.org/10.31399/asm.cp.itsc2012p0058

View Articletitled, Double Rare-Earth Oxides Co-Doped Strontium Zirconate as a New Thermal Barrier Coating Material

Deposition and Characterization of Thermally Sprayed Coatings Prepared by a Nanostructured Martensitic Steel Powder

D. Zois; A. Lekatou; A.E. Karantzalis; M. Vardavoulias; A. Vazdirvanidis

ITSC 2012; 64-69https://doi.org/10.31399/asm.cp.itsc2012p0064

View Articletitled, Deposition and Characterization of Thermally Sprayed Coatings Prepared by a Nanostructured Martensitic Steel Powder

Bond Strength Characterization of Plasma Sprayed Zirconium on Uranium Alloy by Microcantilever Testing

K. Hollis; N. Mara; R. Field; T. Wynn; P. Dickerson

ITSC 2012; 70-75https://doi.org/10.31399/asm.cp.itsc2012p0070

View Articletitled, Bond Strength Characterization of Plasma Sprayed Zirconium on Uranium Alloy by Microcantilever Testing

Dynamic Corrosion and Wear Testing of Corrosion Resistant Thermal Spray Coatings and Wrought Reference Material in Chlorine Containing Conditions with Low pH Values

J. Laurila; K. Niemi; P. Vuoristo; J. Vajala

ITSC 2012; 76-80https://doi.org/10.31399/asm.cp.itsc2012p0076

View Articletitled, Dynamic Corrosion and Wear Testing of Corrosion Resistant Thermal Spray Coatings and Wrought Reference Material in Chlorine Containing Conditions with Low pH Values

Optimizing NiCr Thermal Spray Coating with Process Map Methodology for High Temperature Power Plant Boiler Application

M. Oksa; T. Varis; T. Suhonen; M. Jokipii

ITSC 2012; 81-86https://doi.org/10.31399/asm.cp.itsc2012p0081

View Articletitled, Optimizing NiCr Thermal Spray Coating with Process Map Methodology for High Temperature Power Plant Boiler Application

Combined Diffusion Barrier and Wear-Resistant Thermal Spray Coatings on Light-Weight Charging Racks in Furnace Applications

T. Lampke; R. Drehmann; C. Rupprecht; D. Trimis; M. Gilbert; V. Uhlig

ITSC 2012; 87-92https://doi.org/10.31399/asm.cp.itsc2012p0087

View Articletitled, Combined Diffusion Barrier and Wear-Resistant Thermal Spray Coatings on Light-Weight Charging Racks in Furnace Applications

Casting Requirements on Light Metal Crankcases for Thermally Sprayed Fe-Based Bore Coatings

F. Ernst; D. Kube; G. Klaus

ITSC 2012; 93-97https://doi.org/10.31399/asm.cp.itsc2012p0093

View Articletitled, Casting Requirements on Light Metal Crankcases for Thermally Sprayed Fe-Based Bore Coatings

Innovative Coating Developments Using a New, User Friendly HVOF and Metal Based Powders

G. R. Heath; A. Tremblay; P. Andersson; A. Arizmendi Morquecho

ITSC 2012; 98-103https://doi.org/10.31399/asm.cp.itsc2012p0098

View Articletitled, Innovative Coating Developments Using a New, User Friendly HVOF and Metal Based Powders

Applications and Case Studies

Thermal Spraying of Zinc and Zinc-Aluminium Alloys for Corrosion Protection

Frank Prenger; Jochen Spriestersbach

ITSC 2012; 104-109https://doi.org/10.31399/asm.cp.itsc2012p0104

View Articletitled, Thermal Spraying of Zinc and Zinc-Aluminium Alloys for Corrosion Protection

A New Hybrid Process for Repair Brazing and Coating of Turbine Blades

M. Nicolaus; K. Möhwald; Fr.-W. Bach

ITSC 2012; 110-113https://doi.org/10.31399/asm.cp.itsc2012p0110

View Articletitled, A New Hybrid Process for Repair Brazing and Coating of Turbine Blades

Study of Delamination Induced by Laser-Drilling of Thermally-Sprayed TBC Interfaces

C. Guinard; V. Guipont; H. Proudhon; M. Jeandin; J. Girardot; M. Schneider; L. Berthe; A. Martin

ITSC 2012; 114-119https://doi.org/10.31399/asm.cp.itsc2012p0114

View Articletitled, Study of Delamination Induced by Laser-Drilling of Thermally-Sprayed TBC Interfaces

Studies of Air Plasma Sprayed Thermal Barrier Coatings and Their Surface Roughness for Applications in Siemens Medium Size Gas Turbines

Xin-Hai Li; Sebastian Heinze; Håkan Brodin; Robert Eriksson

ITSC 2012; 120-125https://doi.org/10.31399/asm.cp.itsc2012p0120

View Articletitled, Studies of Air Plasma Sprayed Thermal Barrier Coatings and Their Surface Roughness for Applications in Siemens Medium Size Gas Turbines

Formation of Abradable Alumina Ceramic Coatings through Deposition of Semi-Molten Ceramic Particles by Flame Spray

J. Zou; C.-J. Li; H.-B. Huo; B. Chen; C.-X. Li; G.-J. Yang

ITSC 2012; 126-130https://doi.org/10.31399/asm.cp.itsc2012p0126

View Articletitled, Formation of Abradable Alumina Ceramic Coatings through Deposition of Semi-Molten Ceramic Particles by Flame Spray

High Performance Aluminum Titanium Coatings for Anti-Slip Applications

D. Wixson; S. Barker

ITSC 2012; 131-136https://doi.org/10.31399/asm.cp.itsc2012p0131

View Articletitled, High Performance Aluminum Titanium Coatings for Anti-Slip Applications

A Laser Thermal Cycling Rig as a New Method to Characterize the Evolution of Coating Adhesion under Thermal Cycle

D. Poirier; E. Irissou; J.G. Legoux

ITSC 2012; 137-142https://doi.org/10.31399/asm.cp.itsc2012p0137

View Articletitled, A Laser Thermal Cycling Rig as a New Method to Characterize the Evolution of Coating Adhesion under Thermal Cycle

Current and Next-Generation Titanium Blade Compatible Compressor Abradable Coatings

D. Sporer; S. Wilson

ITSC 2012; 143-148https://doi.org/10.31399/asm.cp.itsc2012p0143

View Articletitled, Current and Next-Generation Titanium Blade Compatible Compressor Abradable Coatings

Effect of 20% Gadolinia – 80% Zirconia Thermal Barrier Coating for Diesel Engine Performance

L. Chandrasagar

ITSC 2012; 149-153https://doi.org/10.31399/asm.cp.itsc2012p0149

View Articletitled, Effect of 20% Gadolinia – 80% Zirconia Thermal Barrier Coating for Diesel Engine Performance

Integrated Study of APS YSZ Coatings with Different Spray Angle

Y.K. Chen; Y. Tan; S. Tessarini; S. Sampath

ITSC 2012; 154-159https://doi.org/10.31399/asm.cp.itsc2012p0154

View Articletitled, Integrated Study of APS YSZ Coatings with Different Spray Angle

Molten Zinc Corrosion Mechanism of HVOF Sprayed WC-Co Coatings

Tsai-Shang Huang

ITSC 2012; 160-165https://doi.org/10.31399/asm.cp.itsc2012p0160

View Articletitled, Molten Zinc Corrosion Mechanism of HVOF Sprayed WC-Co Coatings

Improved Blade Tips for Abradable Coatings used in Gas Turbines

Komal Laul; Suebali Rahemanji; Ravi Shankar; Richard Fenton; Carl Perrin; Andrew McMillan

ITSC 2012; 166-171https://doi.org/10.31399/asm.cp.itsc2012p0166

View Articletitled, Improved Blade Tips for Abradable Coatings used in Gas Turbines

HVOF Coating Case Study for Power Plant Process Control Ball Valve Application

Luc Vernhes; David A. Lee; Dominique Poirier; Duanjie Li; J.E. Klemberg-Sapieha

ITSC 2012; 172-177https://doi.org/10.31399/asm.cp.itsc2012p0172

View Articletitled, HVOF Coating Case Study for Power Plant Process Control Ball Valve Application

Role of Process Conditions on the Interfacial Fracture Toughness of Plasma Sprayed Zirconia

Y. Okajima; T. Nakamura; S. Sampath

ITSC 2012; 178-183https://doi.org/10.31399/asm.cp.itsc2012p0178

View Articletitled, Role of Process Conditions on the Interfacial Fracture Toughness of Plasma Sprayed Zirconia

Corrosion Testing of HVOF Coatings in High Temperature Environments for Biomass Applications

S. Paul; M. D. F. Harvey

ITSC 2012; 184-189https://doi.org/10.31399/asm.cp.itsc2012p0184

View Articletitled, Corrosion Testing of HVOF Coatings in High Temperature Environments for Biomass Applications

The Effects of Abrasive Conditions on the Performance of Tungsten Carbide-Based Metal Matrix Composite Overlays

G. Fisher; T. Wolfe

ITSC 2012; 190-193https://doi.org/10.31399/asm.cp.itsc2012p0190

View Articletitled, The Effects of Abrasive Conditions on the Performance of Tungsten Carbide-Based Metal Matrix Composite Overlays

Effects of PTA Torch Selection on Microstructure and Performance of WC-MMC Overlays

T. Wolfe; G. Fisher

ITSC 2012; 194-199https://doi.org/10.31399/asm.cp.itsc2012p0194

View Articletitled, Effects of PTA Torch Selection on Microstructure and Performance of WC-MMC Overlays

Application of Granulated Nano Al₂O₃ Powders in Thermal Barrier Coatings at Elevated Temperatures

M. S. Hussain; M. R. Daroonparvar

ITSC 2012; 200-205https://doi.org/10.31399/asm.cp.itsc2012p0200

View Articletitled, Application of Granulated Nano Al<sub>2</sub>O<sub>3</sub> Powders in Thermal Barrier Coatings at Elevated Temperatures

Biomedical Applications

Effect of Coating Thickness on the Stress Distribution in Hip Implants

W.-Z. Wang; P. Han; S.-T. Tu; L.-B. Wang; F.-Z. Xuan

ITSC 2012; 206-209https://doi.org/10.31399/asm.cp.itsc2012p0206

View Articletitled, Effect of Coating Thickness on the Stress Distribution in Hip Implants

Wire Arc Spray Copper Coatings in Medical Applications

O. Sharif Ahmadian; H. Salimi Jazi; M. H. Fathi; J. Mostaghimi; L. Pershin

ITSC 2012; 210-214https://doi.org/10.31399/asm.cp.itsc2012p0210

View Articletitled, Wire Arc Spray Copper Coatings in Medical Applications

High Velocity Suspension Flame Sprayed (HVSFS) Bioactive Coatings for Biomedical Applications

N. Stiegler; A. Killinger; R. Gadow

ITSC 2012; 215-218https://doi.org/10.31399/asm.cp.itsc2012p0215

View Articletitled, High Velocity Suspension Flame Sprayed (HVSFS) Bioactive Coatings for Biomedical Applications

Design of Experiments Analysis of Flame Sprayed PCL/PMMA Bioactive Coatings

A. Chebbi; J. Stokes

ITSC 2012; 219-224https://doi.org/10.31399/asm.cp.itsc2012p0219

View Articletitled, Design of Experiments Analysis of Flame Sprayed PCL/PMMA Bioactive Coatings

Modeling of Phenomena Occurring in Plasma Jet at Suspension Spraying of Hydroxyapatite Coatings

G. Delluc; B. Pateyron; L. Pawłowski; N. Calve; A. Denoirjean

ITSC 2012; 225-230https://doi.org/10.31399/asm.cp.itsc2012p0225

View Articletitled, Modeling of Phenomena Occurring in Plasma Jet at Suspension Spraying of Hydroxyapatite Coatings

Cold Spray

Fabrication of Aluminum-Alumina Metal Matrix Composite Coatings Via Cold Gas Dynamic Spraying at Low Pressure Followed by Friction-Stir Processing

Kevin Hodder; Adrian Gerlich; Julio Villafuerte; André McDonald

ITSC 2012; 231-236https://doi.org/10.31399/asm.cp.itsc2012p0231

View Articletitled, Fabrication of Aluminum-Alumina Metal Matrix Composite Coatings Via Cold Gas Dynamic Spraying at Low Pressure Followed by Friction-Stir Processing

Gas Substrate Heat Exchange during Cold-Gas Dynamic Spraying

A. McDonald; A. Ryabinin; E. Irissou; J.-G. Legoux

ITSC 2012; 237-242https://doi.org/10.31399/asm.cp.itsc2012p0237

View Articletitled, Gas Substrate Heat Exchange during Cold-Gas Dynamic Spraying

Cold Spray Forming Inconel 718

W. Wong; E. Irissou; J.-G. Legoux; F. Bernier; P. Vo; S. Yue; S. Michiyoshi; H. Fukanuma

ITSC 2012; 243-248https://doi.org/10.31399/asm.cp.itsc2012p0243

View Articletitled, Cold Spray Forming Inconel 718

Deposition of Amorphous Aluminium Powder Using Cold Spray

P.K. Koh; P. Cheang; K. Loke; S.C.M. Yu; S.M. Ang

ITSC 2012; 249-253https://doi.org/10.31399/asm.cp.itsc2012p0249

View Articletitled, Deposition of Amorphous Aluminium Powder Using Cold Spray

Research on Corrosion Behavior of Cold Sprayed Copper Coating on Aluminum Substrate

Huang Guosheng; Gu Daming; Li Xiangbo; Xing Lukuo; Wang Hongren

ITSC 2012; 254-258https://doi.org/10.31399/asm.cp.itsc2012p0254

View Articletitled, Research on Corrosion Behavior of Cold Sprayed Copper Coating on Aluminum Substrate

Advanced Image Processing of Ag-Based Composite Powders for the Modeling of the Cold Spray Process

Y. Zeralli; H. Proudhon; F. N’Guyen; M. Jeandin; N. Lenoir; L. Doublet

ITSC 2012; 259-264https://doi.org/10.31399/asm.cp.itsc2012p0259

View Articletitled, Advanced Image Processing of Ag-Based Composite Powders for the Modeling of the Cold Spray Process

Metallization of a Polymer Using Cold Spray: Application to Aluminum Coating of Polyamide 66

D. Giraud; F. Borit; V. Guipont; M. Jeandin; J.M. Malhaire

ITSC 2012; 265-270https://doi.org/10.31399/asm.cp.itsc2012p0265

View Articletitled, Metallization of a Polymer Using Cold Spray: Application to Aluminum Coating of Polyamide 66

Residual Stress Measurements in Cold Sprayed Tantalum Coatings

O. Bailly; T. Laguionie; L. Bianchi; M. Vardelle; A. Vardelle

ITSC 2012; 271-276https://doi.org/10.31399/asm.cp.itsc2012p0271

View Articletitled, Residual Stress Measurements in Cold Sprayed Tantalum Coatings

Impacting Behavior of Large Oxidized Copper Particles in Cold Spraying

Wenya Li; Min Yu; Xueping Guo; Hanlin Liao

ITSC 2012; 277-282https://doi.org/10.31399/asm.cp.itsc2012p0277

View Articletitled, Impacting Behavior of Large Oxidized Copper Particles in Cold Spraying

Comparison of the Characteristics of CoNiCrAlY Coatings Prepared by Cold Spray and LPPS Process

M. Sone; H. Fukanuma; R. Huang; N. Ohno

ITSC 2012; 283-286https://doi.org/10.31399/asm.cp.itsc2012p0283

View Articletitled, Comparison of the Characteristics of CoNiCrAlY Coatings Prepared by Cold Spray and LPPS Process

Development of Nano-Porous Alumina Catalyst Support by Anodic Oxidation of Thermally and Kinetically Sprayed Aluminum Coatings

K. Sakata; K. Tagomori; N. Sugiyama; M. Takenouchi; Y. Shinya; Y. Suzuki

ITSC 2012; 287-291https://doi.org/10.31399/asm.cp.itsc2012p0287

View Articletitled, Development of Nano-Porous Alumina Catalyst Support by Anodic Oxidation of Thermally and Kinetically Sprayed Aluminum Coatings

Prediction of Coating Formation in Shockwave-Induced Spray Process Through Modeling

M. Karimi; G.W. Rankin; B. Jodoin

ITSC 2012; 292-297https://doi.org/10.31399/asm.cp.itsc2012p0292

View Articletitled, Prediction of Coating Formation in Shockwave-Induced Spray Process Through Modeling

Effect of SiC Particle Size on Microstructure and Properties of Cold Sprayed Al5056/SiC Composite Coatings

Min Yu; Wenya Li; Xinkun Suo; Hanlin Liao

ITSC 2012; 298-304https://doi.org/10.31399/asm.cp.itsc2012p0298

View Articletitled, Effect of SiC Particle Size on Microstructure and Properties of Cold Sprayed Al5056/SiC Composite Coatings

Kinetic Metallization Repair of Alclad

R. Tapphorn; H. Gabel; K. Hashimoto; T. Crowe

ITSC 2012; 305-310https://doi.org/10.31399/asm.cp.itsc2012p0305

View Articletitled, Kinetic Metallization Repair of Alclad

Kinetic Metallization of Interior Diameter Bores

R. Tapphorn; H. Gabel; K. Hashimoto; T. Crowe

ITSC 2012; 311-316https://doi.org/10.31399/asm.cp.itsc2012p0311

View Articletitled, Kinetic Metallization of Interior Diameter Bores

Effect of Substrate Preheating on Bonding Strength of Cold-Sprayed Mg Coatings

X.-K Suo; M. Yu; M.P. Planche; H. Liao; M. Yu; W.-Y. Li

ITSC 2012; 317-322https://doi.org/10.31399/asm.cp.itsc2012p0317

View Articletitled, Effect of Substrate Preheating on Bonding Strength of Cold-Sprayed Mg Coatings

Phase Transformation of Cold-Sprayed Ni/Al-Al₂O₃ Composite Coatings during Post-Spraying Annealing Treatment

G.-J. Yang; S.-N. Zhao; C.-X. Li; C.-J. Li

ITSC 2012; 323-328https://doi.org/10.31399/asm.cp.itsc2012p0323

View Articletitled, Phase Transformation of Cold-Sprayed Ni/Al-Al<sub>2</sub>O<sub>3</sub> Composite Coatings during Post-Spraying Annealing Treatment

As Coated Compounding of Intermetallics from Feedstock of High and Low Melting Points by Cold Spraying

K. H. Ko; J. O. Choi; H. Lee

ITSC 2012; 329-333https://doi.org/10.31399/asm.cp.itsc2012p0329

View Articletitled, As Coated Compounding of Intermetallics from Feedstock of High and Low Melting Points by Cold Spraying

Influence of Accelerating Gas Flow Rate on Optical Property and Cohesion/Adhesion of Vacuum Cold Sprayed TiO₂ Scattering Layer

X.-L. He; G.-J. Yang; C.-X. Li; C.-J. Li; S.-Q. Fan

ITSC 2012; 334-339https://doi.org/10.31399/asm.cp.itsc2012p0334

View Articletitled, Influence of Accelerating Gas Flow Rate on Optical Property and Cohesion/Adhesion of Vacuum Cold Sprayed TiO<sub>2</sub> Scattering Layer

Deposition Behavior and Microstructural Features of Vacuum Kinetic Sprayed AlN

H. Park; J. Heo; Cao Fei; J. Kwon; K. Kang; G. Bae; C. Lee

ITSC 2012; 340-344https://doi.org/10.31399/asm.cp.itsc2012p0340

View Articletitled, Deposition Behavior and Microstructural Features of Vacuum Kinetic Sprayed AlN

Restoration of Damaged Aircraft Skin by Cold Spray Technique: The Advantages and the Challenges

M. Yandouzi; B. Jodoin

ITSC 2012; 345-350https://doi.org/10.31399/asm.cp.itsc2012p0345

View Articletitled, Restoration of Damaged Aircraft Skin by Cold Spray Technique: The Advantages and the Challenges

Corrosion Protection of Mg-Alloys with Cold Sprayed Composite Coatings

E. Maeva; D. Dzhurinskiy; V. Leshchynsky; R.Gr. Maev

ITSC 2012; 351-356https://doi.org/10.31399/asm.cp.itsc2012p0351

View Articletitled, Corrosion Protection of Mg-Alloys with Cold Sprayed Composite Coatings

Passive and Pulse–Echo Ultrasonic Monitoring of Cold Spray Process

R. Gr. Maev; S. Titov; V. Leshchynsky

ITSC 2012; 357-362https://doi.org/10.31399/asm.cp.itsc2012p0357

View Articletitled, Passive and Pulse–Echo Ultrasonic Monitoring of Cold Spray Process

Cold Spraying of Nickel Using High-End Parameter Sets

A. List; S. P. Buschmann; F. Gärtner; T. Klassen

ITSC 2012; 363-367https://doi.org/10.31399/asm.cp.itsc2012p0363

View Articletitled, Cold Spraying of Nickel Using High-End Parameter Sets

Cold-Spraying of Ti₂AlC MAX-Phase Coatings

H. Gutzmann; F. Gärtner; T. Klassen; D. Höche; C. Blawert

ITSC 2012; 368-373https://doi.org/10.31399/asm.cp.itsc2012p0368

View Articletitled, Cold-Spraying of Ti<sub>2</sub>AlC MAX-Phase Coatings

Effect of Substrate Temperature on Cold-Gas Sprayed Coatings on Ceramic Substrates

K.-R. Ernst; J. Braeutigam; F. Gaertner; T. Klassen

ITSC 2012; 374-379https://doi.org/10.31399/asm.cp.itsc2012p0374

View Articletitled, Effect of Substrate Temperature on Cold-Gas Sprayed Coatings on Ceramic Substrates

Influence of Chemical Composition of WC Cermet Powders on Cold Spraying

K. Sato; H. Furukawa; J. Kitamura; K. Sato; D. Seo; K. Ogawa

ITSC 2012; 380-383https://doi.org/10.31399/asm.cp.itsc2012p0380

View Articletitled, Influence of Chemical Composition of WC Cermet Powders on Cold Spraying

Electronic and Semiconductor Applications

Atmospheric Plasma Sprayed Forsterite (Mg₂SiO₄) Coatings: An Investigation of the Processing-Microstructure-Performance Relationship

C.V. Cojocaru; J.-M. Lamarre; J.-G. Legoux; B.R. Marple

ITSC 2012; 384-389https://doi.org/10.31399/asm.cp.itsc2012p0384

View Articletitled, Atmospheric Plasma Sprayed Forsterite (Mg<sub>2</sub>SiO<sub>4</sub>) Coatings: An Investigation of the Processing-Microstructure-Performance Relationship

Thermal Spray Coatings: Semiconductor Equipment Design and Process Chamber Requirements for 40 nm and Beyond

J. Sommers

ITSC 2012; 390-392https://doi.org/10.31399/asm.cp.itsc2012p0390

View Articletitled, Thermal Spray Coatings: Semiconductor Equipment Design and Process Chamber Requirements for 40 nm and Beyond

Influence of Thermal Spray Parameters on Two-Wire Arc Aluminum Semiconductor Equipment Coatings

M. Watson; R. Gansert

ITSC 2012; 393-396https://doi.org/10.31399/asm.cp.itsc2012p0393

View Articletitled, Influence of Thermal Spray Parameters on Two-Wire Arc Aluminum Semiconductor Equipment Coatings

Manufacturing and Processing

Comparisons of Two Models for the Simulation of a DC Arc Plasma Torch

Renzhong Huang; Hirotaka Fukanuma; Yoshihiko Uesugi; Yasunori Tanaka

ITSC 2012; 397-402https://doi.org/10.31399/asm.cp.itsc2012p0397

View Articletitled, Comparisons of Two Models for the Simulation of a DC Arc Plasma Torch

Influence of Fine Powder Feedstock (-10 +2 μm) on the HVOF Spraying Characteristics, Coating Morphology, and Properties of WC-CoCr 86-10-4

J. Nebel; W. Tillmann; W. Piotrowski; I.-A. Laemmerhirt

ITSC 2012; 403-408https://doi.org/10.31399/asm.cp.itsc2012p0403

View Articletitled, Influence of Fine Powder Feedstock (-10 +2 μm) on the HVOF Spraying Characteristics, Coating Morphology, and Properties of WC-CoCr 86-10-4

Acoustic Emission Analysis by Twin Wire Arc Spraying Using Cored Wires with Different Powder Size

R. Zielke; W. Tillmann; G. Wang; M. Abdulgader

ITSC 2012; 409-415https://doi.org/10.31399/asm.cp.itsc2012p0409

View Articletitled, Acoustic Emission Analysis by Twin Wire Arc Spraying Using Cored Wires with Different Powder Size

Instability of the Arc Spraying Using Cored Wires

W. Tillmann; M. Abdulgader

ITSC 2012; 416-424https://doi.org/10.31399/asm.cp.itsc2012p0416

View Articletitled, Instability of the Arc Spraying Using Cored Wires

Structural and Properties Relationship of Alumina Reinforced Inconel Cold Gas Sprayed Coatings

S. Dosta; N. Cinca; J. M. Guilemany

ITSC 2012; 425-428https://doi.org/10.31399/asm.cp.itsc2012p0425

View Articletitled, Structural and Properties Relationship of Alumina Reinforced Inconel Cold Gas Sprayed Coatings

Robot Trajectory Generated on Free-Form Work Pieces for Thermal Spraying

Zhen-Hua Cai; Si-Hao Deng; Han-Lin Liao; Chun-Nian Zeng; Christian Coddet

ITSC 2012; 429-435https://doi.org/10.31399/asm.cp.itsc2012p0429

View Articletitled, Robot Trajectory Generated on Free-Form Work Pieces for Thermal Spraying

Control of Wire Arc Spraying Using Artificial Neural Networks for the Production of Thin-Walled Moulds for Carbon Fiber Reinforced Plastics

K. Hartz-Behrend; S. Kirner; J. Schein; D. P. Jonke; M. Englhart; J. Zierhut

ITSC 2012; 436-441https://doi.org/10.31399/asm.cp.itsc2012p0436

View Articletitled, Control of Wire Arc Spraying Using Artificial Neural Networks for the Production of Thin-Walled Moulds for Carbon Fiber Reinforced Plastics

High Velocity Suspension Flame Spraying and Suspension Plasma Spraying of Oxide Ceramics

A. Killinger; P. Müller; R. Gadow

ITSC 2012; 442-447https://doi.org/10.31399/asm.cp.itsc2012p0442

View Articletitled, High Velocity Suspension Flame Spraying and Suspension Plasma Spraying of Oxide Ceramics

Robot Trajectory Planning for High Quality Thermal Spray Coating Processes on Complex Shaped Components

M. Floristán; J. A. Montesinos; J. A. García-Marín; A. Killinger; R. Gadow

ITSC 2012; 448-453https://doi.org/10.31399/asm.cp.itsc2012p0448

View Articletitled, Robot Trajectory Planning for High Quality Thermal Spray Coating Processes on Complex Shaped Components

Numerical Analysis of Solution Mixture and Torch Design in High-Velocity Suspension Flame Spraying

E. Dongmo; M. Wenzelburger; R. Gadow

ITSC 2012; 454-459https://doi.org/10.31399/asm.cp.itsc2012p0454

View Articletitled, Numerical Analysis of Solution Mixture and Torch Design in High-Velocity Suspension Flame Spraying

Application of HVOF and HVSFS for High Performance Mass Transport Vehicle Chassis Components

S. Heyd; A. Manzat; A. Killinger; R. Gadow

ITSC 2012; 460-464https://doi.org/10.31399/asm.cp.itsc2012p0460

View Articletitled, Application of HVOF and HVSFS for High Performance Mass Transport Vehicle Chassis Components

HVOF Process Control Enabling Strategies

A. Ghabchi; T. Varis; K. Holmberg; S. Sampath; T. Varis; K. Holmberg; S. Sampath

ITSC 2012; 465-471https://doi.org/10.31399/asm.cp.itsc2012p0465

View Articletitled, HVOF Process Control Enabling Strategies

Effect of Surface Roughness, Wettability and Temperature on Ceramic Droplet Flattening

G. Bidron; S. Goutier; P. Denoirjean; M. Vardelle; P. Fauchais

ITSC 2012; 472-478https://doi.org/10.31399/asm.cp.itsc2012p0472

View Articletitled, Effect of Surface Roughness, Wettability and Temperature on Ceramic Droplet Flattening

Process-Microstructure Relationships in the Twin Wire Arc Zinc Process

A. Hall; J. McCloskey; A. Johnston

ITSC 2012; 479-484https://doi.org/10.31399/asm.cp.itsc2012p0479

View Articletitled, Process-Microstructure Relationships in the Twin Wire Arc Zinc Process

Effect of Base Metal on the Thermal Cycle Properties of Heat-Resistant Plasma Sprayed Coatings

K. Sonoya; H. Sunahara; M. Nakamura; K. Ishida

ITSC 2012; 485-487https://doi.org/10.31399/asm.cp.itsc2012p0485

View Articletitled, Effect of Base Metal on the Thermal Cycle Properties of Heat-Resistant Plasma Sprayed Coatings

Improving the Properties of Plasma and HVOF Sprayed Alumina Coatings by Chromia Addition

L. Hyvärinen; J. Hakalahti; M. Kylmälahti; J. Silvonen; K. Niemi; P. Vuoristo

ITSC 2012; 488-493https://doi.org/10.31399/asm.cp.itsc2012p0488

View Articletitled, Improving the Properties of Plasma and HVOF Sprayed Alumina Coatings by Chromia Addition

Military Applications

Military Adoption of Kinetic Metallization

R. Tapphorn; H. Gabel; K. Hashimoto; Weston Wahl; T. Crowe

ITSC 2012; 494-499https://doi.org/10.31399/asm.cp.itsc2012p0494

View Articletitled, Military Adoption of Kinetic Metallization

Kinetic Metallization of Ceramic Armor Tiles

R. Tapphorn; H. Gabel; L. Premuda; T. Crowe; K. Hashimoto

ITSC 2012; 500-503https://doi.org/10.31399/asm.cp.itsc2012p0500

View Articletitled, Kinetic Metallization of Ceramic Armor Tiles

Kinetic Metallization Repair of Ion Vapor Deposited Aluminum Coatings

R. Tapphorn; H. Gabel; K. Hashimoto; T. Crowe

ITSC 2012; 504-509https://doi.org/10.31399/asm.cp.itsc2012p0504

View Articletitled, Kinetic Metallization Repair of Ion Vapor Deposited Aluminum Coatings

Thermally Enhanced Bonding and Mechanical Properties of Kinetic Sprayed Al Deposit for Double-Layered Cu Liner

J. Won; G. Bae; K. Kang; C. Lee; S. Kim; K. Lee; S. Lee

ITSC 2012; 510-514https://doi.org/10.31399/asm.cp.itsc2012p0510

View Articletitled, Thermally Enhanced Bonding and Mechanical Properties of Kinetic Sprayed Al Deposit for Double-Layered Cu Liner

Oil and Gas Applications

Cold-Sprayed WC-Ni-Cu MMC Coatings with Improved Hardness

N. Melendez; A. McDonald; G. Fisher

ITSC 2012; 515-520https://doi.org/10.31399/asm.cp.itsc2012p0515

View Articletitled, Cold-Sprayed WC-Ni-Cu MMC Coatings with Improved Hardness

Interconnected Porosity Modification of Plasma Sprayed Alumina Coating Using Excimer Laser Surface Treatment

O. Amsellem; F. Pauchet; M. Jeandin; V. Guipont

ITSC 2012; 521-528https://doi.org/10.31399/asm.cp.itsc2012p0521

View Articletitled, Interconnected Porosity Modification of Plasma Sprayed Alumina Coating Using Excimer Laser Surface Treatment

High Velocity Air-Fuel Spraying and Its Applications in Oil and Gas Industry

A. Verstak; G. Kusinski

ITSC 2012; 529-534https://doi.org/10.31399/asm.cp.itsc2012p0529

View Articletitled, High Velocity Air-Fuel Spraying and Its Applications in Oil and Gas Industry

The Effects of Carbide Characteristics on the Structure and Performance of Tungsten Carbide-Based Coatings, Deposited by HVOF-Spraying

G. Fisher; T. Wolfe

ITSC 2012; 535-539https://doi.org/10.31399/asm.cp.itsc2012p0535

View Articletitled, The Effects of Carbide Characteristics on the Structure and Performance of Tungsten Carbide-Based Coatings, Deposited by HVOF-Spraying

Thermal Spray Coatings for Application in Petrochemical Field: A Comparison of Tungsten Carbide, Chromium Carbide and Inconel 625

A. Scrivani; A. Giorgetti; F. Bianchi; L. Campanini; L. Coppelletti; H. Keller

ITSC 2012; 540-543https://doi.org/10.31399/asm.cp.itsc2012p0540

View Articletitled, Thermal Spray Coatings for Application in Petrochemical Field: A Comparison of Tungsten Carbide, Chromium Carbide and Inconel 625

Improved Coatings for Extended Design Life of 22%Cr Duplex Stainless Steel in Marine Environments

S. Paul; C. M. Lee; M. D. F. Harvey

ITSC 2012; 544-549https://doi.org/10.31399/asm.cp.itsc2012p0544

View Articletitled, Improved Coatings for Extended Design Life of 22%Cr Duplex Stainless Steel in Marine Environments

Performance of Corrosion Resistant Arc Spray Coatings as a Function of Spray Parameters

J. Cheney; G. Kusinski

ITSC 2012; 550-555https://doi.org/10.31399/asm.cp.itsc2012p0550

View Articletitled, Performance of Corrosion Resistant Arc Spray Coatings as a Function of Spray Parameters

Utilizing Computational Metallurgy to Design Amorphous and Nanocrystalline Coatings for Wear and Corrosion Resistance

J. Cheney; G. Kusinski

ITSC 2012; 556-561https://doi.org/10.31399/asm.cp.itsc2012p0556

View Articletitled, Utilizing Computational Metallurgy to Design Amorphous and Nanocrystalline Coatings for Wear and Corrosion Resistance

Poster Session

Spray Operating Parameters Optimization Based on Artificial Intelligence during Plasma Process

T. Liu; M.-P. Planche; S. Deng; G. Montavon; A.-F. Kanta

ITSC 2012; 562-567https://doi.org/10.31399/asm.cp.itsc2012p0562

View Articletitled, Spray Operating Parameters Optimization Based on Artificial Intelligence during Plasma Process

Oxidation Behavior of TiAl₃-Al Composite Coating on γ-TiAl Based Alloy at 950 °C

J. Yang; L. Kong; X. Cui; Y. Tao; T. Li; T. Xiong

ITSC 2012; 568-573https://doi.org/10.31399/asm.cp.itsc2012p0568

View Articletitled, Oxidation Behavior of TiAl<sub>3</sub>-Al Composite Coating on γ-TiAl Based Alloy at 950 °C

Multi-Response Optimization of Process Parameters for Low-Pressure Cold Spray Coating Process Using Taguchi and Utility Concept

Tarun Goyal; R.S. Walia; T.S. Sidhu; H.P.S. Sidhu

ITSC 2012; 574-579https://doi.org/10.31399/asm.cp.itsc2012p0574

View Articletitled, Multi-Response Optimization of Process Parameters for Low-Pressure Cold Spray Coating Process Using Taguchi and Utility Concept

Measurement of the Young’s Modulus of Thermal Spray Coatings by Means of Several Methods

W. Tillmann; U. Selvadurai; W. Luo

ITSC 2012; 580-587https://doi.org/10.31399/asm.cp.itsc2012p0580

View Articletitled, Measurement of the Young’s Modulus of Thermal Spray Coatings by Means of Several Methods

Influences of Spray Conditions on the Morphologies of Copper Splat in Cold Spray Process

Wenhua Ma; Renzhong Huang; Hirotaka Fukanuma

ITSC 2012; 588-593https://doi.org/10.31399/asm.cp.itsc2012p0588

View Articletitled, Influences of Spray Conditions on the Morphologies of Copper Splat in Cold Spray Process

Effect of Particle Velocity on Cold Sprayed Stainless Steel Deposits

Renzhong Huang; Wenhua Ma; Hirotaka Fukanuma

ITSC 2012; 594-599https://doi.org/10.31399/asm.cp.itsc2012p0594

View Articletitled, Effect of Particle Velocity on Cold Sprayed Stainless Steel Deposits

Bonding Mechanism in Cold-Sprayed Aluminum Coatings: Localized Interatomic Bonds

Yinyin Zhang; Jishan Zhang

ITSC 2012; 600-602https://doi.org/10.31399/asm.cp.itsc2012p0600

View Articletitled, Bonding Mechanism in Cold-Sprayed Aluminum Coatings: Localized Interatomic Bonds

Microstructure and High-Temperature Corrosion Behavior of Wire-Arc Sprayed Ni-Based Coatings

Z. Zhou; X.Z. Zhao; D.Y. He; R. Li; J.M. Jiang; Q.Y. Zhao

ITSC 2012; 603-608https://doi.org/10.31399/asm.cp.itsc2012p0603

View Articletitled, Microstructure and High-Temperature Corrosion Behavior of Wire-Arc Sprayed Ni-Based Coatings

A Comparison of Thermal Shock Behavior between APS and Low-Energy VLPPS ZrO₂-7%Y₂O₃ Thermal Barrier Coatings

L. Zhu; R. Bolot; M.P. Planche; H. Liao; C. Coddet; N. Zhang

ITSC 2012; 609-614https://doi.org/10.31399/asm.cp.itsc2012p0609

View Articletitled, A Comparison of Thermal Shock Behavior between APS and Low-Energy VLPPS ZrO<sub>2</sub>-7%Y<sub>2</sub>O<sub>3</sub> Thermal Barrier Coatings

Knudsen Effect on the Computed Effective Thermal Conductivity of Thermal Spray Coatings

J.H. Qiao; R. Bolot; H.L. Liao; C. Coddet

ITSC 2012; 615-621https://doi.org/10.31399/asm.cp.itsc2012p0615

View Articletitled, Knudsen Effect on the Computed Effective Thermal Conductivity of Thermal Spray Coatings

The Influence of Titanium Sub-Oxides in Thermal Sprayed Coatings

M. Gardon; J. M. Guilemany

ITSC 2012; 622-626https://doi.org/10.31399/asm.cp.itsc2012p0622

View Articletitled, The Influence of Titanium Sub-Oxides in Thermal Sprayed Coatings

Solid Oxide Fuel Cells Produced by Atmospheric Plasma Spray Technology: Structural and Electrochemical Characterization

M. Torrell; I.G. Cano; J.M. Miguel; J.M. Guilemany; M. A. Laguna-Bercero; V. M. Orera

ITSC 2012; 627-632https://doi.org/10.31399/asm.cp.itsc2012p0627

View Articletitled, Solid Oxide Fuel Cells Produced by Atmospheric Plasma Spray Technology: Structural and Electrochemical Characterization

Influence of Al₂O₃ Content on the Microstructure and Microhardness of NiAl- Al₂O₃ Composites with Micro-Sized Al₂O₃ Strengthening Particles by Plasma Activated Sintering

G.-J. Yang; S.-N. Zhao; C.-X. Li; C.-J. Li

ITSC 2012; 633-638https://doi.org/10.31399/asm.cp.itsc2012p0633

View Articletitled, Influence of Al<sub>2</sub>O<sub>3</sub> Content on the Microstructure and Microhardness of NiAl- Al<sub>2</sub>O<sub>3</sub> Composites with Micro-Sized Al<sub>2</sub>O<sub>3</sub> Strengthening Particles by Plasma Activated Sintering

Microstructure and Properties of Porous Ni50Cr50- Al₂O₃ Cermet Support for Solid Oxide Fuel Cells

Shan-Lin Zhang; Cheng-Xin Li; Chang-Jiu Li; Guan-Jun Yang

ITSC 2012; 639-645https://doi.org/10.31399/asm.cp.itsc2012p0639

View Articletitled, Microstructure and Properties of Porous Ni50Cr50- Al<sub>2</sub>O<sub>3</sub> Cermet Support for Solid Oxide Fuel Cells

Effects of Substrate Treated by Dry-Ice Blasting on the Formation of CoNiCrAlY Splats

S.-J. Dong; B. Song; H.-L. Liao; C. Coddet; B. Hansz

ITSC 2012; 646-650https://doi.org/10.31399/asm.cp.itsc2012p0646

View Articletitled, Effects of Substrate Treated by Dry-Ice Blasting on the Formation of CoNiCrAlY Splats

Property Improvement of Plasma-Sprayed FeAl Coating by Dry-Ice Blasting

B. Song; S.-J. Dong; H.-L. Liao; C. Coddet; B. Hansz; T. Grosdidier

ITSC 2012; 651-656https://doi.org/10.31399/asm.cp.itsc2012p0651

View Articletitled, Property Improvement of Plasma-Sprayed FeAl Coating by Dry-Ice Blasting

Preparation and Characterization of Super-Hydrophobic Surface through Particle Deposition by Vacuum Cold Spray

T. Guo; C.-J. Li; G.-J. Yang; C.-X. Li; G.-J. Qiao

ITSC 2012; 657-663https://doi.org/10.31399/asm.cp.itsc2012p0657

View Articletitled, Preparation and Characterization of Super-Hydrophobic Surface through Particle Deposition by Vacuum Cold Spray

Process and Microstructure of Nano-Zirconia Coatings Prepared by Solution Plasma Spraying

Hui. Yang

ITSC 2012; 664-668https://doi.org/10.31399/asm.cp.itsc2012p0664

View Articletitled, Process and Microstructure of Nano-Zirconia Coatings Prepared by Solution Plasma Spraying

Characterization of Nonmelted Particles in Plasma-Sprayed Al₂O₃ Coatings by Scanning Electron Microscopy, Raman Analysis and X-Ray Diffraction Analysis

G.-J. Yang; C.-X. Li; C.-J. Li

ITSC 2012; 669-675https://doi.org/10.31399/asm.cp.itsc2012p0669

View Articletitled, Characterization of Nonmelted Particles in Plasma-Sprayed Al<sub>2</sub>O<sub>3</sub> Coatings by Scanning Electron Microscopy, Raman Analysis and X-Ray Diffraction Analysis

Epitaxial Grain Growth during Splat Cooling of Alumina Droplets Produced by Atmospheric Plasma Spraying

E.-J. Yang; G.-J. Yang; X.-T. Luo; C.-J. Li; M. Takahashi

ITSC 2012; 676-680https://doi.org/10.31399/asm.cp.itsc2012p0676

View Articletitled, Epitaxial Grain Growth during Splat Cooling of Alumina Droplets Produced by Atmospheric Plasma Spraying

Fabrication of Porous Stainless Steel through Semi-Molten Spray Particles Deposition by Flame Spraying

J.-T. Yao; C.-J. Li; G.-J. Yang; C.-X. Li

ITSC 2012; 681-685https://doi.org/10.31399/asm.cp.itsc2012p0681

View Articletitled, Fabrication of Porous Stainless Steel through Semi-Molten Spray Particles Deposition by Flame Spraying

Adhesive Strength and Cohesive Strength of Thick LPPS W Coating on CuCrZr Substrate

C.-M. Deng; M. Liu; C.-G. Deng; K.-S. Zhou; Z.-Q. Kuang

ITSC 2012; 686-688https://doi.org/10.31399/asm.cp.itsc2012p0686

View Articletitled, Adhesive Strength and Cohesive Strength of Thick LPPS W Coating on CuCrZr Substrate

Effect of Powder Structure on the Adhesion and Electrical Properties of TiN Coatings Deposited by Vacuum Cold Spray

Y.-Y. Wang; Y.-J. Zhang; Y. Liu; C.-J. Li; G.-J Yang

ITSC 2012; 689-693https://doi.org/10.31399/asm.cp.itsc2012p0689

View Articletitled, Effect of Powder Structure on the Adhesion and Electrical Properties of TiN Coatings Deposited by Vacuum Cold Spray

Effect of Processing Parameters on the Deposition Characteristics and Microstructure of Vacuum Kinetic Sprayed TiN Layer

F. Cao; H. Park; W. Yong; C. Lee

ITSC 2012; 694-698https://doi.org/10.31399/asm.cp.itsc2012p0694

View Articletitled, Effect of Processing Parameters on the Deposition Characteristics and Microstructure of Vacuum Kinetic Sprayed TiN Layer

In Vitro Cytocompatibility of Plasma-Sprayed Dicalcium Silicate/Zirconia Composite Coatings

Y.T. Xie; X.B. Zheng; L.P. Huang; C. X. Ding

ITSC 2012; 699-702https://doi.org/10.31399/asm.cp.itsc2012p0699

View Articletitled, In Vitro Cytocompatibility of Plasma-Sprayed Dicalcium Silicate/Zirconia Composite Coatings

Bilayer Plasma-Sprayed Alumina for Optical Applications

J. Marthe; E. Meillot; F. Enguehard; G. Jeandel

ITSC 2012; 703-707https://doi.org/10.31399/asm.cp.itsc2012p0703

View Articletitled, Bilayer Plasma-Sprayed Alumina for Optical Applications

Evaluation of Sprayed Coatings by Electrical Method

Y. Morisawa; T. Maruyama

ITSC 2012; 708-711https://doi.org/10.31399/asm.cp.itsc2012p0708

View Articletitled, Evaluation of Sprayed Coatings by Electrical Method

Implementation of a Low Cost Monitoring and Control System to a Radial Injection Plasma Spray Process Towards Manufacturing of High-Quality, Consistent Coatings at Improved Efficiency and Lower Cost

V. Matikainen; K. Niemi; M. Kylmälahti; P. Vuoristo; J. Larjo; N. Kriikka; I. Linden

ITSC 2012; 712-717https://doi.org/10.31399/asm.cp.itsc2012p0712

View Articletitled, Implementation of a Low Cost Monitoring and Control System to a Radial Injection Plasma Spray Process Towards Manufacturing of High-Quality, Consistent Coatings at Improved Efficiency and Lower Cost

Research and Development

Flattening Mechanism of Thermal Sprayed Particles

M. Fukumoto; K. Yang; S. Yoshida; D. Mano; M. Yamada; T. Yasui

ITSC 2012; 718-723https://doi.org/10.31399/asm.cp.itsc2012p0718

View Articletitled, Flattening Mechanism of Thermal Sprayed Particles

In-Flight Particle Characterization and Coating Formation of Yttria-Stabilized Zirconia under Low Pressure Plasma Spray Condition

N. Zhang; L. Zhu; M.P. Planche; H. Liao; C. Coddet

ITSC 2012; 724-728https://doi.org/10.31399/asm.cp.itsc2012p0724

View Articletitled, In-Flight Particle Characterization and Coating Formation of Yttria-Stabilized Zirconia under Low Pressure Plasma Spray Condition

High-Temperature Oxidation Behavior of Fe-25Cr-5Al Arc Spraying Coatings

Yu. Korobov; M. Filipov; S. Nevezhin; M. Karabanalov

ITSC 2012; 729-733https://doi.org/10.31399/asm.cp.itsc2012p0729

View Articletitled, High-Temperature Oxidation Behavior of Fe-25Cr-5Al Arc Spraying Coatings

Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al₂O₃ Coatings

S.-J. Dong; B. Song; H.-L. Liao; C. Coddet; B. Hansz

ITSC 2012; 734-739https://doi.org/10.31399/asm.cp.itsc2012p0734

View Articletitled, Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al<sub>2</sub>O<sub>3</sub> Coatings

A Simplified Model for Prediction of HVOF NiCr Coating Properties through Experimental Design and Diagnostic Measurements

D. Zois; T. Wentz; S. Sampath

ITSC 2012; 740-745https://doi.org/10.31399/asm.cp.itsc2012p0740

View Articletitled, A Simplified Model for Prediction of HVOF NiCr Coating Properties through Experimental Design and Diagnostic Measurements

Multiple-Approach Evaluation of WSP Coatings Adhesion/Cohesion Strength

R. Musalek; M. Vilemova; J. Matejicek; V. Pejchal

ITSC 2012; 746-751https://doi.org/10.31399/asm.cp.itsc2012p0746

View Articletitled, Multiple-Approach Evaluation of WSP Coatings Adhesion/Cohesion Strength

Void Formation and Spatial Distribution in Plasma Sprayed Nd-Fe-B Coatings

J. A. Gan; C. C. Berndt; Y. C. Wong; J. Wang

ITSC 2012; 752-757https://doi.org/10.31399/asm.cp.itsc2012p0752

View Articletitled, Void Formation and Spatial Distribution in Plasma Sprayed Nd-Fe-B Coatings

Adhesion Properties of Sprayed Coatings on Substrate Blasted by Multiangle Blasting

T. Maruyama; T. Kishita

ITSC 2012; 758-762https://doi.org/10.31399/asm.cp.itsc2012p0758

View Articletitled, Adhesion Properties of Sprayed Coatings on Substrate Blasted by Multiangle Blasting

Surface Engineering

Improvement of Aluminum Coating Behaviours by Hybrid Process Including Plasma Spraying and Laser Ablation

S. Costil; Ch. Verdy; G. Montavon; K. Wittmann-Teneze; S. Methout; L. Bianchi

ITSC 2012; 763-769https://doi.org/10.31399/asm.cp.itsc2012p0763

View Articletitled, Improvement of Aluminum Coating Behaviours by Hybrid Process Including Plasma Spraying and Laser Ablation

Investigation of Wear and Corrosion Protection of AlSi20 Coatings Produced by Thermal Spraying and Laser Cladding on AZ31B

K. Bobzin; N. Kopp; T. Warda; C. Schulz; G. Rolink; A. Weisheit

ITSC 2012; 770-775https://doi.org/10.31399/asm.cp.itsc2012p0770

View Articletitled, Investigation of Wear and Corrosion Protection of AlSi20 Coatings Produced by Thermal Spraying and Laser Cladding on AZ31B

In-Situ Processing of Functional Graded Coatings by Means of Atmospheric Plasma Spraying

Wolfgang Tillmann; Leif Hagen; Iris-Aya Laemmerhirt

ITSC 2012; 776-781https://doi.org/10.31399/asm.cp.itsc2012p0776

View Articletitled, In-Situ Processing of Functional Graded Coatings by Means of Atmospheric Plasma Spraying

Cladding by Plasma Transferred Arc Process: Effect of the Process on Plasma Parameters Behavior and Molten Bath

H. Lucas; A. Denoirjean; M. Vardelle; A.M. Furlani

ITSC 2012; 782-787https://doi.org/10.31399/asm.cp.itsc2012p0782

View Articletitled, Cladding by Plasma Transferred Arc Process: Effect of the Process on Plasma Parameters Behavior and Molten Bath

Erosion and Abrasion Resistance of Fe₂B-Based Arc-Sprayed Coatings and Weld Overlays Containing Chromium and Carbon

S. Dallaire

ITSC 2012; 788-792https://doi.org/10.31399/asm.cp.itsc2012p0788

View Articletitled, Erosion and Abrasion Resistance of Fe<sub>2</sub>B-Based Arc-Sprayed Coatings and Weld Overlays Containing Chromium and Carbon

Suspension and Solution Plasma Spray

The Influence of Process Equipment on the Properties of Suspension Plasma Sprayed Yttria-Stabilized Zirconia Coatings

M. Marr; D. Waldbillig; O. Kesler

ITSC 2012; 793-799https://doi.org/10.31399/asm.cp.itsc2012p0793

View Articletitled, The Influence of Process Equipment on the Properties of Suspension Plasma Sprayed Yttria-Stabilized Zirconia Coatings

Thermal Diffusivity and Conductivity of Yttria Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying

L. Łatka; L. Pawłowski; S. Valette; B. Pateyron; J.P. Lecompte; A. Denoirjean; A. Cattini; R. Kumar

ITSC 2012; 800-804https://doi.org/10.31399/asm.cp.itsc2012p0800

View Articletitled, Thermal Diffusivity and Conductivity of Yttria Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying

Mechanical Properties of Yttria and Ceria Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying

L. Łatka; L. Pawłowski; A. Cattini; A. Denoirjean; D. Chicot; S. Kozerski; F. Petit

ITSC 2012; 805-809https://doi.org/10.31399/asm.cp.itsc2012p0805

View Articletitled, Mechanical Properties of Yttria and Ceria Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying

Influence of Spray Parameters and Characteristics of Solutions on Microstructure and Phase Composition of Solution Precursor Atmospheric Plasma Sprayed (SPPS) Mn-Co Spinel Coating

J. Puranen; J. Laakso; L. Hyvärinen; M. Kylmälahti; P. Vuoristo

ITSC 2012; 810-815https://doi.org/10.31399/asm.cp.itsc2012p0810

View Articletitled, Influence of Spray Parameters and Characteristics of Solutions on Microstructure and Phase Composition of Solution Precursor Atmospheric Plasma Sprayed (SPPS) Mn-Co Spinel Coating

Novel Insights into Liquid Behavior in Atmospheric Plasma Jets

D. Soysal; A. Ansar

ITSC 2012; 816-821https://doi.org/10.31399/asm.cp.itsc2012p0816

View Articletitled, Novel Insights into Liquid Behavior in Atmospheric Plasma Jets

Porous Ultra-Capacitor Electrodes Fabricated by Solution Precursor Plasma Spray: Molybdenum Oxide vs. Molybdenum Nitride

M. Golozar; K. Chien; T.W. Coyle

ITSC 2012; 822-827https://doi.org/10.31399/asm.cp.itsc2012p0822

View Articletitled, Porous Ultra-Capacitor Electrodes Fabricated by Solution Precursor Plasma Spray: Molybdenum Oxide vs. Molybdenum Nitride

Advances in Thermal Spray Technology

Process Conditions and Microstructures of Ceramic Coatings by Gas Phase Deposition Based on Plasma Spraying

G. Mauer; A. Hospach; N. Zotov; R. Vaßen

ITSC 2012; 828-833https://doi.org/10.31399/asm.cp.itsc2012p0828

View Articletitled, Process Conditions and Microstructures of Ceramic Coatings by Gas Phase Deposition Based on Plasma Spraying

A Laser Surface Texturation to Control the Coating-Substrate Interface

A. Lamraoui; S. Costil; C. Langlade; A. Roman

ITSC 2012; 834-839https://doi.org/10.31399/asm.cp.itsc2012p0834

View Articletitled, A Laser Surface Texturation to Control the Coating-Substrate Interface

Influence of the Spray Angle on the Characteristics of HVOF Sprayed Coatings Processed by Means of Fine WC-12Co (2–10 μm) Powders

W. Tillmann; I. Baumann; P. Hollingsworth; I.-A. Laemmerhirt

ITSC 2012; 840-845https://doi.org/10.31399/asm.cp.itsc2012p0840

View Articletitled, Influence of the Spray Angle on the Characteristics of HVOF Sprayed Coatings Processed by Means of Fine WC-12Co (2–10 μm) Powders

In Situ Synthesis of FeAl Dense Coatings by Very Low Pressure Reactive Plasma Spraying

L. Zhu; R. Bolot; H. Liao; C. Coddet; N. Zhang

ITSC 2012; 846-850https://doi.org/10.31399/asm.cp.itsc2012p0846

View Articletitled, In Situ Synthesis of FeAl Dense Coatings by Very Low Pressure Reactive Plasma Spraying

Preparation and Characterization of Porous Molybdenum by Low-Velocity Flame Spraying of Semi-Molten Particle Deposition

Biao Chen; Chang-Jiu Li; Guan-Jun Yang; Jian-Tao Yao; Hui-Bin Huo; Cheng-Xin Li

ITSC 2012; 851-857https://doi.org/10.31399/asm.cp.itsc2012p0851

View Articletitled, Preparation and Characterization of Porous Molybdenum by Low-Velocity Flame Spraying of Semi-Molten Particle Deposition

Deposition of WC-Co Coatings by a Novel High Pressure HVOF

B. Sun; H. Fukanuma

ITSC 2012; 858-863https://doi.org/10.31399/asm.cp.itsc2012p0858

View Articletitled, Deposition of WC-Co Coatings by a Novel High Pressure HVOF

Characterization of Yttria Coatings Synthesized by Conventional DC Plasma Spray and a Novel Plasma Torch

M. Saeidfar; H. R. Salimijazi; R. Emadi; J. Mostaghimi; L. Pershin; Thomas W. Coyle

ITSC 2012; 864-866https://doi.org/10.31399/asm.cp.itsc2012p0864

View Articletitled, Characterization of Yttria Coatings Synthesized by Conventional DC Plasma Spray and a Novel Plasma Torch

Improvement of Coating Properties in Three-Cathode Atmospheric Plasma Spraying

K. Bobzin; N. Kopp; T. Warda; I. Petković; S. Zimmermann; K. Hartz-Behrend; K. Landes; G. Forster; S. Kirner; J.-L. Marqués; J. Schein; J. Prehm; L. Xin; K. Möhwald; Fr.-W. Bach

ITSC 2012; 867-872https://doi.org/10.31399/asm.cp.itsc2012p0867

View Articletitled, Improvement of Coating Properties in Three-Cathode Atmospheric Plasma Spraying

Aluminum Nitride Coating Fabricated by Reactive Plasma Spraying of Al₂O₃

M. Shahien; M. Yamada; T. Yasui; M. Fukumoto

ITSC 2012; 873-879https://doi.org/10.31399/asm.cp.itsc2012p0873

View Articletitled, Aluminum Nitride Coating Fabricated by Reactive Plasma Spraying of Al<sub>2</sub>O<sub>3</sub>

APS TriplexPro-200/-210 and HVOF K2: Comparison of Two Modern Thermal Spray Systems with Regard to Particle In-Flight and Coating Properties Using Iron Based Feedstock Materials

K. Bobzin; T. Schläfer; T. Warda; I. Petkovic; M. Schäfer; K. Landes; G. Forster; S. Zimmermann; J. Marques-Lopez; S. Kirner; M. Kauffeld; J. Schein

ITSC 2012; 880-885https://doi.org/10.31399/asm.cp.itsc2012p0880

View Articletitled, APS TriplexPro-200/-210 and HVOF K2: Comparison of Two Modern Thermal Spray Systems with Regard to Particle In-Flight and Coating Properties Using Iron Based Feedstock Materials

Evaluating a Single Arc Cascaded Plasma Gun

D. Hawley; R. Molz; D. Chen

ITSC 2012; 886-891https://doi.org/10.31399/asm.cp.itsc2012p0886

View Articletitled, Evaluating a Single Arc Cascaded Plasma Gun

Developments to Influence Coating Properties and to Reduce Fine Particulate in Arc Spraying

Werner Kroemmer; Peter Heinrich

ITSC 2012; 892-896https://doi.org/10.31399/asm.cp.itsc2012p0892

View Articletitled, Developments to Influence Coating Properties and to Reduce Fine Particulate in Arc Spraying

Volume Information

Preface

ITSC 2012; iii-ivhttps://doi.org/10.31399/asm.cp.itsc2012fm01

View Articletitled, Preface

Organizing Committees

ITSC 2012; vhttps://doi.org/10.31399/asm.cp.itsc2012fm02

View Articletitled, Organizing Committees