Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2000: Proceedings from the International Thermal Spray Conference

Diagnostics and Torch Design

Anode Boundary Layer Effects in Plasma Spray Torches

Z. Duan; J. Heberlein

ITSC 2000; 1-7https://doi.org/10.31399/asm.cp.itsc2000p0001

View Articletitled, Anode Boundary Layer Effects in Plasma Spray Torches

More on the Influence of Injector Geometry and Carrier Gas Flow Rate on Spray Pattern and Particle Temperature

J.R. Fincke; W.D. Swank; D.C. Haggard

ITSC 2000; 9-14https://doi.org/10.31399/asm.cp.itsc2000p0009

View Articletitled, More on the Influence of Injector Geometry and Carrier Gas Flow Rate on Spray Pattern and Particle Temperature

Diagnostics and Applications of an Innovative Plasma Torch Generating a Broad Plasma Jet

R. Hartmann; K.D. Landes

ITSC 2000; 15-20https://doi.org/10.31399/asm.cp.itsc2000p0015

View Articletitled, Diagnostics and Applications of an Innovative Plasma Torch Generating a Broad Plasma Jet

Diagnostic Measurement of Supersonic Ammonia and Nitrogen/Hydrogen-Mixture DC Plasma Jets for Nitriding Under a Low Pressure Environment

H. Tahara; T. Shibata; K. Mitsuo; T. Yoshikawa; Japan Y. Ando

ITSC 2000; 21-28https://doi.org/10.31399/asm.cp.itsc2000p0021

View Articletitled, Diagnostic Measurement of Supersonic Ammonia and Nitrogen/Hydrogen-Mixture DC Plasma Jets for Nitriding Under a Low Pressure Environment

Influence of Plasma Spraying Parameters on Coating Damage

L. Bianchi; N. Baradel; N. Llorca-Isern; G. Bertran-Vidai

ITSC 2000; 29-36https://doi.org/10.31399/asm.cp.itsc2000p0029

View Articletitled, Influence of Plasma Spraying Parameters on Coating Damage

Influence of External Parameters on Arc Fluctuations in a F4 DC Plasma Torch Used for Thermal Spraying

J.-L Dorier; C. Hollenstein; A. Salito; M. Loch; G. Barbezat

ITSC 2000; 37-43https://doi.org/10.31399/asm.cp.itsc2000p0037

View Articletitled, Influence of External Parameters on Arc Fluctuations in a F4 DC Plasma Torch Used for Thermal Spraying

A New Sensor for On-Line Monitoring the Temperature and Velocity of Thermal Spray Particles

G. Bourque; M. Lamontagne; C. Moreau

ITSC 2000; 45-50https://doi.org/10.31399/asm.cp.itsc2000p0045

View Articletitled, A New Sensor for On-Line Monitoring the Temperature and Velocity of Thermal Spray Particles

Particle Temperature Measurements by Spectroscopic and Two-Wavelength Streak Imaging

J.E. Craig; R.A. Parker; F.S. Biancaniello; S.D. Ridder; S.P. Mates

ITSC 2000; 51-56https://doi.org/10.31399/asm.cp.itsc2000p0051

View Articletitled, Particle Temperature Measurements by Spectroscopic and Two-Wavelength Streak Imaging

The Benefits of the PROTAL Process on the Adhesion of Thermal Sprayed Coating

G. Barbezat; F. Folio; C. Coddet; G. Montavon

ITSC 2000; 57-61https://doi.org/10.31399/asm.cp.itsc2000p0057

View Articletitled, The Benefits of the PROTAL Process on the Adhesion of Thermal Sprayed Coating

Particle Flux Imaging (PFI) In-Situ Diagnostics for Thermal Coating Process

J. Zierhut; K.D. Landes; W. Krömmer; P. Heinrich

ITSC 2000; 63-66https://doi.org/10.31399/asm.cp.itsc2000p0063

View Articletitled, Particle Flux Imaging (PFI) In-Situ Diagnostics for Thermal Coating Process

PSI: New Diagnostics for the Determination of Particle Size and Shape in Thermal Spray Processes

T. Streibl; K.D. Landes; G. Forster

ITSC 2000; 67-70https://doi.org/10.31399/asm.cp.itsc2000p0067

View Articletitled, PSI: New Diagnostics for the Determination of Particle Size and Shape in Thermal Spray Processes

Study of the Air Entrainment Within dc Plasma Jets

O. Lagnoux; J.F. Coudert; K. Wittmann; P. Fauchais

ITSC 2000; 71-77https://doi.org/10.31399/asm.cp.itsc2000p0071

View Articletitled, Study of the Air Entrainment Within dc Plasma Jets

Imaging Diagnostics in Thermal Spraying—SprayWatch System

E. Hämäläinen; J. Vattulainen; T. Alahautala; R. Hernberg; P. Vuoristo; T. Mäntylä

ITSC 2000; 79-83https://doi.org/10.31399/asm.cp.itsc2000p0079

View Articletitled, Imaging Diagnostics in Thermal Spraying—SprayWatch System

Powder Particle Velocity Measurement in Electrothermal Chemical Spraying Device

L. Rabani; S. Wald; G. Appelbaum; D. Zoler

ITSC 2000; 85-89https://doi.org/10.31399/asm.cp.itsc2000p0085

View Articletitled, Powder Particle Velocity Measurement in Electrothermal Chemical Spraying Device

The Capabilities and Limitations of Pulsed Plasma, Electrical, Chemical Thermal Spray

M. Factor; I. Roman; S. Wald

ITSC 2000; 91-98https://doi.org/10.31399/asm.cp.itsc2000p0091

View Articletitled, The Capabilities and Limitations of Pulsed Plasma, Electrical, Chemical Thermal Spray

Application of Supersonic Expanding Plasma Jets to Nitriding of Steel Materials

Y. Ando; S. Tobe; H. Tahara; T. Yoshikawa

ITSC 2000; 99-104https://doi.org/10.31399/asm.cp.itsc2000p0099

View Articletitled, Application of Supersonic Expanding Plasma Jets to Nitriding of Steel Materials

Modeling and Simulation

Numerical Modeling of Particle Laden Flow in HVOF Torch with Gas Shroud

A. Dolatabadi; J. Mostaghimi; M. Ivanovic

ITSC 2000; 105-113https://doi.org/10.31399/asm.cp.itsc2000p0105

View Articletitled, Numerical Modeling of Particle Laden Flow in HVOF Torch with Gas Shroud

A Computational Examination of the Sources of Statistical Variance in Particle Parameters During Thermal Plasma Spraying

R.L. Williamson; J.R. Fincke; C.H. Chang

ITSC 2000; 115-124https://doi.org/10.31399/asm.cp.itsc2000p0115

View Articletitled, A Computational Examination of the Sources of Statistical Variance in Particle Parameters During Thermal Plasma Spraying

Numerical Simulation of Thermal Spray Coating Formation

M. Pasandideh-Fard; J. Mostaghimi; S. Chandra

ITSC 2000; 125-134https://doi.org/10.31399/asm.cp.itsc2000p0125

View Articletitled, Numerical Simulation of Thermal Spray Coating Formation

Modeling of Oxidation of Plasma-Sprayed Molybdenum Coatings

Y.P. Wan; X.Y. Jiang; H. Zhang; S. Sampath; V. Prasad; J.R. Fincke

ITSC 2000; 135-139https://doi.org/10.31399/asm.cp.itsc2000p0135

View Articletitled, Modeling of Oxidation of Plasma-Sprayed Molybdenum Coatings

Plasma Spraying of Functionally Graded Materials: Measured and Simulated Results

J.R. Fincke; R.L. Williamson; C.H. Chang

ITSC 2000; 141-148https://doi.org/10.31399/asm.cp.itsc2000p0141

View Articletitled, Plasma Spraying of Functionally Graded Materials: Measured and Simulated Results

Process Maps for Plasma Spray Part I: Plasma-Particle Interactions

D.L. Gilmore; R.A. Neiser; Y. Wan; S. Sampath

ITSC 2000; 149-155https://doi.org/10.31399/asm.cp.itsc2000p0149

View Articletitled, Process Maps for Plasma Spray Part I: Plasma-Particle Interactions

Process Maps for Plasma Spray Part II: Deposition and Properties

X. Jiang; J. Matejicek; A. Kulkarni; H. Herman; S. Sampath; D.L. Gilmore; R.A. Neiser

ITSC 2000; 157-163https://doi.org/10.31399/asm.cp.itsc2000p0157

View Articletitled, Process Maps for Plasma Spray Part II: Deposition and Properties

Theory of Particle Composition Analysis During Thermal Spraying

J. Wilden; H. Frank

ITSC 2000; 165-171https://doi.org/10.31399/asm.cp.itsc2000p0165

View Articletitled, Theory of Particle Composition Analysis During Thermal Spraying

Thermal Shock Testing and Finite Element Modeling of Pre-Oxidized Thermal Barrier Coatings

Y. Liu; C. Persson; P. Bengtsson; A.C. Leger; J. Wigren

ITSC 2000; 173-180https://doi.org/10.31399/asm.cp.itsc2000p0173

View Articletitled, Thermal Shock Testing and Finite Element Modeling of Pre-Oxidized Thermal Barrier Coatings

An Attempt to Improve the Deposition Efficiency of AI₂O₃ Coating by HVOF Spraying

Y. Shimizu; K. Sugiura; K. Sakaki; A. Devasanapathi

ITSC 2000; 181-186https://doi.org/10.31399/asm.cp.itsc2000p0181

View Articletitled, An Attempt to Improve the Deposition Efficiency of AI<sub>2</sub>O<sub>3</sub> Coating by HVOF Spraying

Mathematical Model of In-Flight Oxidation of Metallic Particles in Thermal Spraying

A.M. Ahmed; R.H. Rangel; V.V. Sobolev; J.M. Guilemany

ITSC 2000; 187-193https://doi.org/10.31399/asm.cp.itsc2000p0187

View Articletitled, Mathematical Model of In-Flight Oxidation of Metallic Particles in Thermal Spraying

Effect of Contact Resistance and Substrate Melting on Thermal Spray Coating

D.W. Sun; J. Xu; H. Zhang; Y.P. Wan; V. Prasad; G.X. Wang

ITSC 2000; 195-201https://doi.org/10.31399/asm.cp.itsc2000p0195

View Articletitled, Effect of Contact Resistance and Substrate Melting on Thermal Spray Coating

Modeling of Spray Deposition and Robot Motion Optimization for a Gas Turbine Application

A. Hansbo; P.E. Nylén

ITSC 2000; 203-209https://doi.org/10.31399/asm.cp.itsc2000p0203

View Articletitled, Modeling of Spray Deposition and Robot Motion Optimization for a Gas Turbine Application

Computer Aided Coating Design

J. Wilden; H. Frank; T. Müller

ITSC 2000; 211-217https://doi.org/10.31399/asm.cp.itsc2000p0211

View Articletitled, Computer Aided Coating Design

Simulation of Thermal Spray Process Based on Particle Tracing Method

K. Wada; M. Ito; M. Takahashi; K. Takaishi

ITSC 2000; 219-227https://doi.org/10.31399/asm.cp.itsc2000p0219

View Articletitled, Simulation of Thermal Spray Process Based on Particle Tracing Method

Simulation and Experimental Studies of Particles Interaction with Plasma Jet in Vacuum Plasma Spraying Processes

A. Ilyuschenko; V. Okovity; S. Kundas; V. Gurevich

ITSC 2000; 229-236https://doi.org/10.31399/asm.cp.itsc2000p0229

View Articletitled, Simulation and Experimental Studies of Particles Interaction with Plasma Jet in Vacuum Plasma Spraying Processes

Computational Fluid Dynamics Analysis of Gas and Particle Flow in Flame Spraying

P.E. Nylén; R. Bandyopadhyay

ITSC 2000; 237-244https://doi.org/10.31399/asm.cp.itsc2000p0237

View Articletitled, Computational Fluid Dynamics Analysis of Gas and Particle Flow in Flame Spraying

Structure and Properties

Fracture Toughness of HVOF Sprayed WC-Co Coatings

S. De Palo; M. Mohanty; H. Marc-Charles; M. Dorfman

ITSC 2000; 245-250https://doi.org/10.31399/asm.cp.itsc2000p0245

View Articletitled, Fracture Toughness of HVOF Sprayed WC-Co Coatings

Structure and Adhesion of Ni and Ni-WC Plasma Spray Coatings

T.W. Coyle; A. Bahrami

ITSC 2000; 251-254https://doi.org/10.31399/asm.cp.itsc2000p0251

View Articletitled, Structure and Adhesion of Ni and Ni-WC Plasma Spray Coatings

Cold Spray Processing of Titanium Powder

J. Karthikeyan; C.M. Kay; J. Lindeman; R.S. Lima; C.C. Berndt

ITSC 2000; 255-262https://doi.org/10.31399/asm.cp.itsc2000p0255

View Articletitled, Cold Spray Processing of Titanium Powder

Properties of WC-Co Components Produced Using the HVOF Thermal Spray Process

J. Stokes; L. Looney

ITSC 2000; 263-271https://doi.org/10.31399/asm.cp.itsc2000p0263

View Articletitled, Properties of WC-Co Components Produced Using the HVOF Thermal Spray Process

Structure and Properties of Thermally Sprayed Amorphous Polymer Coatings

T.E. Twardowski; X.H. Fang; R. Knight

ITSC 2000; 273-279https://doi.org/10.31399/asm.cp.itsc2000p0273

View Articletitled, Structure and Properties of Thermally Sprayed Amorphous Polymer Coatings

Effect of Powder Properties such as Particle Size, Density and Melt Flow Rate on the Properties of Flame Sprayed PE Coating

E. Rajamäki; M. Leino; P. Vuoristo; P. Järvelä; T. Mäntylä

ITSC 2000; 281-287https://doi.org/10.31399/asm.cp.itsc2000p0281

View Articletitled, Effect of Powder Properties such as Particle Size, Density and Melt Flow Rate on the Properties of Flame Sprayed PE Coating

Reactive Plasma Spray for the Deposition of Ti/TiN Coatings: A Comparative Compositional Study by X-Ray Diffraction (XRD) and X-Ray Photoelectron Spectroscopy (XPS)

T. Bacci; U. Bardi; F. Borgioli; E. Galvanetto; F. Galliano; A. Lavacchi; A. Scrivani

ITSC 2000; 289-291https://doi.org/10.31399/asm.cp.itsc2000p0289

View Articletitled, Reactive Plasma Spray for the Deposition of Ti/TiN Coatings: A Comparative Compositional Study by X-Ray Diffraction (XRD) and X-Ray Photoelectron Spectroscopy (XPS)

Residual Stress Analysis of Solid Lubricant Containing Coatings on Light Metal Alloys for Aluminum Engine Components

M. Buchmann; R. Gadow

ITSC 2000; 293-298https://doi.org/10.31399/asm.cp.itsc2000p0293

View Articletitled, Residual Stress Analysis of Solid Lubricant Containing Coatings on Light Metal Alloys for Aluminum Engine Components

Characterization of Al₂O₃ and SiC Particles, Reinforced Al Powders, and Plasma Sprayed Wear Resistance Coatings

Fr.-W. Bach; T. Duda; Z. Babiak; P. Bohling; B. Formanek

ITSC 2000; 299-302https://doi.org/10.31399/asm.cp.itsc2000p0299

View Articletitled, Characterization of Al<sub>2</sub>O<sub>3</sub> and SiC Particles, Reinforced Al Powders, and Plasma Sprayed Wear Resistance Coatings

Solid Lubricant Containing Coatings for Cylinder Liners in Pressure Casted Aluminum Crankcases

M. Buchmann; R. Gadow; A. Killinger

ITSC 2000; 303-308https://doi.org/10.31399/asm.cp.itsc2000p0303

View Articletitled, Solid Lubricant Containing Coatings for Cylinder Liners in Pressure Casted Aluminum Crankcases

The Influence of Powder Characteristics on the Properties of Detonation Sprayed Cr₃C₂-25NiCr Coatings

K.R.C. Somaraju; D. Srinivasarao; G. Sivakumar; D. Sen; G.V.N. Rao; G. Sundararajan

ITSC 2000; 309-316https://doi.org/10.31399/asm.cp.itsc2000p0309

View Articletitled, The Influence of Powder Characteristics on the Properties of Detonation Sprayed Cr<sub>3</sub>C<sub>2</sub>-25NiCr Coatings

Study of Photo-Catalytic Character of Plasma Sprayed TiO₂ Coatings

A. Ohmori; H. Shoyama; S. Matsusaka; K. Ohashi; K. Moriya; C.J. Li

ITSC 2000; 317-323https://doi.org/10.31399/asm.cp.itsc2000p0317

View Articletitled, Study of Photo-Catalytic Character of Plasma Sprayed TiO<sub>2</sub> Coatings

Investigating High Temperature Damping Behavior of Plasma Sprayed Ni-Alloy Coatings

K.A. Khor; C.T. Chia; Y.W. Gu

ITSC 2000; 325-331https://doi.org/10.31399/asm.cp.itsc2000p0325

View Articletitled, Investigating High Temperature Damping Behavior of Plasma Sprayed Ni-Alloy Coatings

Structure and Properties of Plasma-Sprayed Zircon Coating

M. Suzuki; S. Sodeoka; T. Inoue; K. Shimosaka; S. Oki

ITSC 2000; 333-339https://doi.org/10.31399/asm.cp.itsc2000p0333

View Articletitled, Structure and Properties of Plasma-Sprayed Zircon Coating

Residual Stress

Characterization of Thermal Spray Coatings Used for Dimensional Restoration

R.T.R. McGrann; J. Kim; J.R. Shadley; E.F. Rybicki; N.-G. Ingesten

ITSC 2000; 341-349https://doi.org/10.31399/asm.cp.itsc2000p0341

View Articletitled, Characterization of Thermal Spray Coatings Used for Dimensional Restoration

Processing Effects on Residual Stress in Ni+5%AI Coatings–Comparison of Different Spraying Methods

J. Matejicek; S. Sampath; T. Gnaeupel-Herold; H.J. Prask

ITSC 2000; 351-354https://doi.org/10.31399/asm.cp.itsc2000p0351

View Articletitled, Processing Effects on Residual Stress in Ni+5%AI Coatings–Comparison of Different Spraying Methods

Temperature Profiles and Thermal Stress Analysis of Plasma Sprayed Glass-Composite Coatings

T. Zhang; Z. Qiu; Y. Bao; D.T. Gawne; K. Zhang

ITSC 2000; 355-361https://doi.org/10.31399/asm.cp.itsc2000p0355

View Articletitled, Temperature Profiles and Thermal Stress Analysis of Plasma Sprayed Glass-Composite Coatings

Residual Stress Determination from a Laser-Based Curvature Measurement

W.D. Swank; R.A. Gavalya; J.K. Wright; R.N. Wright

ITSC 2000; 363-369https://doi.org/10.31399/asm.cp.itsc2000p0363

View Articletitled, Residual Stress Determination from a Laser-Based Curvature Measurement

Analytical Predictions of Thermal Stress in Plasma Spray Coating and in Substrate at Low Temperature Compared with Strains Measurements

H. Gassot

ITSC 2000; 371-375https://doi.org/10.31399/asm.cp.itsc2000p0371

View Articletitled, Analytical Predictions of Thermal Stress in Plasma Spray Coating and in Substrate at Low Temperature Compared with Strains Measurements

An ASM Recommended Practice for Modified Layer Removal Method (MLRM) to Evaluate Residual Stress in Thermal Spray Coatings

E.F. Rybicki; J.R. Shadley; R.T.R. McGrann; A.C. Savarimuthu; D. Graving

ITSC 2000; 377-383https://doi.org/10.31399/asm.cp.itsc2000p0377

View Articletitled, An ASM Recommended Practice for Modified Layer Removal Method (MLRM) to Evaluate Residual Stress in Thermal Spray Coatings

Influence of Coating Removal Processes on Residual Stresses of Base Ni Sheet

N. Goubot; T. David; J. Baudoin; J. Dhers; M. Ducos; H. Michaud

ITSC 2000; 385-390https://doi.org/10.31399/asm.cp.itsc2000p0385

View Articletitled, Influence of Coating Removal Processes on Residual Stresses of Base Ni Sheet

Micro and Macroscopic Approaches to Residual Stress Generation Mechanism of Thermal Spray Coatings

S. Tobe; Y. Andou; M. Ando; S. Kuroda; K. Akita

ITSC 2000; 391-397https://doi.org/10.31399/asm.cp.itsc2000p0391

View Articletitled, Micro and Macroscopic Approaches to Residual Stress Generation Mechanism of Thermal Spray Coatings

Variation in Residual Stress Field During Fatigue Failure of Thermal Spray Coatings

R. Ahmed; M. Hadfield; S. Tobe

ITSC 2000; 399-406https://doi.org/10.31399/asm.cp.itsc2000p0399

View Articletitled, Variation in Residual Stress Field During Fatigue Failure of Thermal Spray Coatings

Microstructure

Microstructure and Property Control of CoNiCrAlY Based Abradable Coatings for Optimal Performance

X. Wei; J.R. Mallon; L.F. Correa; M.R. Dorfman; F. Ghasripoor

ITSC 2000; 407-412https://doi.org/10.31399/asm.cp.itsc2000p0407

View Articletitled, Microstructure and Property Control of CoNiCrAlY Based Abradable Coatings for Optimal Performance

Microstructure Engineering of Molybdenum Disilicide Based Materials Using Plasm a Spraying

R.U. Vaidya; R.G. Castro; D. Mendoza; A. Ayala; J.J. Petrovic; K.J. Hollis; D.E. Gallegos

ITSC 2000; 413-417https://doi.org/10.31399/asm.cp.itsc2000p0413

View Articletitled, Microstructure Engineering of Molybdenum Disilicide Based Materials Using Plasm a Spraying

Cold Spraying–A Study of Process and Coating Characteristics

H. Kreye; T. Stoltenhoff

ITSC 2000; 419-422https://doi.org/10.31399/asm.cp.itsc2000p0419

View Articletitled, Cold Spraying–A Study of Process and Coating Characteristics

Microstructure Effects on Stainless Steel Substrates from Deposition of Plasma Spray Coatings

R.N. Wright; W.D. Swank

ITSC 2000; 423-428https://doi.org/10.31399/asm.cp.itsc2000p0423

View Articletitled, Microstructure Effects on Stainless Steel Substrates from Deposition of Plasma Spray Coatings

Microstructure and Properties of TiC-CrNiMo SHS Spray Powder and Thermally Sprayed Coating

M. Väisänen; P. Vuoristo; T. Mäntylä; V. Maunu; P. Lintunen; P. Lintula

ITSC 2000; 429-434https://doi.org/10.31399/asm.cp.itsc2000p0429

View Articletitled, Microstructure and Properties of TiC-CrNiMo SHS Spray Powder and Thermally Sprayed Coating

Influence of the Plasma Spray Process on the Microstructure of Atmospheric Plasma Sprayed Yttria Stabilized ZrO₂

M. Friis; C. Persson; J. Wigren

ITSC 2000; 435-441https://doi.org/10.31399/asm.cp.itsc2000p0435

View Articletitled, Influence of the Plasma Spray Process on the Microstructure of Atmospheric Plasma Sprayed Yttria Stabilized ZrO<sub>2</sub>

Influence of Reaction Enthalpy on the Microstructure of Laser-Alloyed Coatings

J. Wilden; H. Frank

ITSC 2000; 443-447https://doi.org/10.31399/asm.cp.itsc2000p0443

View Articletitled, Influence of Reaction Enthalpy on the Microstructure of Laser-Alloyed Coatings

Microstructure-Wear and -Corrosion Relationships for Thermally Sprayed Metallic Deposits

J. Ilavsky; J. Pisacka; P. Chraska; N. Margandant; S. Siegmann; W. Wagner; P. Fiala; G. Barbezat

ITSC 2000; 449-454https://doi.org/10.31399/asm.cp.itsc2000p0449

View Articletitled, Microstructure-Wear and -Corrosion Relationships for Thermally Sprayed Metallic Deposits

Microstructure and Corrosion Resistance of HVOF Sprayed 316L Stainless Steel and Ni Base Alloy Coatings

S. Kuroda; T. Fukushima; T. Kodama; M. Sasaki

ITSC 2000; 455-462https://doi.org/10.31399/asm.cp.itsc2000p0455

View Articletitled, Microstructure and Corrosion Resistance of HVOF Sprayed 316L Stainless Steel and Ni Base Alloy Coatings

The Effect of Oxidation on Microstructure and Properties of TiC-Based Cermet Coatings

F. Gärtner; H. Kreye; V. Borck; W. Krömmer

ITSC 2000; 463-469https://doi.org/10.31399/asm.cp.itsc2000p0463

View Articletitled, The Effect of Oxidation on Microstructure and Properties of TiC-Based Cermet Coatings

High Velocity Oxygen Fuel Coatings

Tungsten Carbide-Cobalt Coatings for Industrial Applications

M. Dorfman; J. DeFalco; J. Karthikeyan

ITSC 2000; 471-478https://doi.org/10.31399/asm.cp.itsc2000p0471

View Articletitled, Tungsten Carbide-Cobalt Coatings for Industrial Applications

Evaluation of Four High Velocity Thermal Spray Guns Using WC-10Co-4Cr Cermets

J.G. Legoux; B. Arsenault; C. Moreau; V. Bouyer; L. Leblanc

ITSC 2000; 479-486https://doi.org/10.31399/asm.cp.itsc2000p0479

View Articletitled, Evaluation of Four High Velocity Thermal Spray Guns Using WC-10Co-4Cr Cermets

Influence of Flame Parameters on Stainless Steel Coatings Properties

V. Gourlaouen; E. Verna; P. Beaubien

ITSC 2000; 487-493https://doi.org/10.31399/asm.cp.itsc2000p0487

View Articletitled, Influence of Flame Parameters on Stainless Steel Coatings Properties

Structure-Dielectric Behavior Relationships in HVOF Sprayed BaTiO₃

A.H. Dent; A.S. Patel; J. Gutleber; S. Sampath; H. Herman; E. Tormey

ITSC 2000; 495-500https://doi.org/10.31399/asm.cp.itsc2000p0495

View Articletitled, Structure-Dielectric Behavior Relationships in HVOF Sprayed BaTiO<sub>3</sub>

Particle Behavior in a Powder-Laden HVOF Jet

E. Lugscheider; C. Herbst-Dederichs; L. Zhao

ITSC 2000; 501-508https://doi.org/10.31399/asm.cp.itsc2000p0501

View Articletitled, Particle Behavior in a Powder-Laden HVOF Jet

Properties of TiC-Ni Based Coatings Deposited by Different HVOF Spraying

P. Vuoristo; M. Väisänen; T. Mäntylä; L.-M. Berger

ITSC 2000; 509-514https://doi.org/10.31399/asm.cp.itsc2000p0509

View Articletitled, Properties of TiC-Ni Based Coatings Deposited by Different HVOF Spraying

Production and Characterization of HVOF Sprayed NiCr-TiC Coatings Using SHS Powder Feedstock

M.T. Blatchford; A.J. Horlock; D.G. McCartney; P.H. Shipway; J.V. Wood

ITSC 2000; 515-522https://doi.org/10.31399/asm.cp.itsc2000p0515

View Articletitled, Production and Characterization of HVOF Sprayed NiCr-TiC Coatings Using SHS Powder Feedstock

Amorphous Phase Formation of Zr-Based Alloy Coating by HVOF Spraying

H.J. Kim; B.G. Seong; K.M. Lim; C.G. Park

ITSC 2000; 523-530https://doi.org/10.31399/asm.cp.itsc2000p0523

View Articletitled, Amorphous Phase Formation of Zr-Based Alloy Coating by HVOF Spraying

Tribological Solutions for Engineering Industries by HVOF–Topgun Spraying

A. Chandak; R. Sivakumar; G. Balasubramanian

ITSC 2000; 531-536https://doi.org/10.31399/asm.cp.itsc2000p0531

View Articletitled, Tribological Solutions for Engineering Industries by HVOF–Topgun Spraying

HVOF Sprayed Titanium Carbide Composite Coatings for Wear Protection

B. Wielage; S. Steinhäuser; T. Schnick; A. Ilyuschenko; A. Azarova

ITSC 2000; 537-542https://doi.org/10.31399/asm.cp.itsc2000p0537

View Articletitled, HVOF Sprayed Titanium Carbide Composite Coatings for Wear Protection

Statistical Optimization of HVAF Sprayed Cr₃C₂-NiCr Coatings for Minimizing Decarburization

S.J. Matthews; M.M. Hyland

ITSC 2000; 543-549https://doi.org/10.31399/asm.cp.itsc2000p0543

View Articletitled, Statistical Optimization of HVAF Sprayed Cr<sub>3</sub>C<sub>2</sub>-NiCr Coatings for Minimizing Decarburization

Effect of Increase in Entrance Convergent Section Length of Gun Nozzle on HVOF Thermal Spray Process and its Application to Nozzle Design for Cold Gas-Dynamic Spray Method

K. Sakaki; Y. Shimizu

ITSC 2000; 551-559https://doi.org/10.31399/asm.cp.itsc2000p0551

View Articletitled, Effect of Increase in Entrance Convergent Section Length of Gun Nozzle on HVOF Thermal Spray Process and its Application to Nozzle Design for Cold Gas-Dynamic Spray Method

Unique Coatings

New Chromium Carbide–Nickel Chrome Materials for High Temperature Wear Applications

K. Laul; M. Dorfman

ITSC 2000; 561-566https://doi.org/10.31399/asm.cp.itsc2000p0561

View Articletitled, New Chromium Carbide–Nickel Chrome Materials for High Temperature Wear Applications

Processing Quasicrystalline Powders to Produce Variable and Unique Coating Properties

F.J. Hermanek

ITSC 2000; 567-573https://doi.org/10.31399/asm.cp.itsc2000p0567

View Articletitled, Processing Quasicrystalline Powders to Produce Variable and Unique Coating Properties

Hard Arc-Sprayed Coating with Enhanced Erosion and Abrasion Wear Resistance

S. Dallaire

ITSC 2000; 575-582https://doi.org/10.31399/asm.cp.itsc2000p0575

View Articletitled, Hard Arc-Sprayed Coating with Enhanced Erosion and Abrasion Wear Resistance

Characterizaton of Plasma Sprayed Aluminum-Beryllium for Aerospace and Space Application

R.G. Castro; D.J. Thoma; R.U. Vaidya; R.D. Field

ITSC 2000; 583-587https://doi.org/10.31399/asm.cp.itsc2000p0583

View Articletitled, Characterizaton of Plasma Sprayed Aluminum-Beryllium for Aerospace and Space Application

Properties of Nickel Superalloy Coatings As-Sprayed and with Nd-YAG Laser Remelting

J. Tuominen; P. Vuoristo; T. Mäntylä; M. Kylmälahti; J. Vihinen; P.H. Andersson

ITSC 2000; 589-596https://doi.org/10.31399/asm.cp.itsc2000p0589

View Articletitled, Properties of Nickel Superalloy Coatings As-Sprayed and with Nd-YAG Laser Remelting

Plasma Spraying of Thick Stainless Steel Coating of a Stereolithography Resin

S. Hédacq; F. Borit; V. Guipont; M. Jeandin; F.N. Guyen; R. Gibert; B. Guilhot; C. Medard

ITSC 2000; 597-601https://doi.org/10.31399/asm.cp.itsc2000p0597

View Articletitled, Plasma Spraying of Thick Stainless Steel Coating of a Stereolithography Resin

Self-Bonding, Exothermically Reactive MCrAlY Composites for Abradable-Clearance Control Coatings

F.J. Hermanek

ITSC 2000; 603-608https://doi.org/10.31399/asm.cp.itsc2000p0603

View Articletitled, Self-Bonding, Exothermically Reactive MCrAlY Composites for Abradable-Clearance Control Coatings

Wires for Arc and High Velocity Flame Spraying—Wire Design, Materials, and Coating Properties

J. Wilden; A. Wank; F. Schreiber

ITSC 2000; 609-617https://doi.org/10.31399/asm.cp.itsc2000p0609

View Articletitled, Wires for Arc and High Velocity Flame Spraying—Wire Design, Materials, and Coating Properties

Plasma-Spray-Forming of Alumina Matrix Composite Reinforced with Metal Thin Wire

S. Sodeoka; T. Inoue; M. Suzuki

ITSC 2000; 619-624https://doi.org/10.31399/asm.cp.itsc2000p0619

View Articletitled, Plasma-Spray-Forming of Alumina Matrix Composite Reinforced with Metal Thin Wire

Novel Bioactive Composites by Thermal Spray Process

K.A. Khor; Y.W. Gu; Y. Li; C.H. Quek; V.J.P. Lim; P. Cheang

ITSC 2000; 625-633https://doi.org/10.31399/asm.cp.itsc2000p0625

View Articletitled, Novel Bioactive Composites by Thermal Spray Process

Evaluation of Adhesive Strength of Coating Film on Ni-Base Superalloy for Gas Turbine

M. Okazaki; M. Okamoto; Y. Harada

ITSC 2000; 635-641https://doi.org/10.31399/asm.cp.itsc2000p0635

View Articletitled, Evaluation of Adhesive Strength of Coating Film on Ni-Base Superalloy for Gas Turbine

Spraying Coatings by Supersonic Metallization

I. Karp; A. Rudoy

ITSC 2000; 643-646https://doi.org/10.31399/asm.cp.itsc2000p0643

View Articletitled, Spraying Coatings by Supersonic Metallization

Preliminary Investigation on the Potential of VC-WC-Co HP/HVOF Powders and Coatings

H.L. de Villiers-Lovelock; S. Luyckx

ITSC 2000; 647-656https://doi.org/10.31399/asm.cp.itsc2000p0647

View Articletitled, Preliminary Investigation on the Potential of VC-WC-Co HP/HVOF Powders and Coatings

Electric Arc Processes and Applications

Transferred-Arc Cleaning of Tungsten

K.J. Hollis; R.G. Castro; B.D. Bartram

ITSC 2000; 657-661https://doi.org/10.31399/asm.cp.itsc2000p0657

View Articletitled, Transferred-Arc Cleaning of Tungsten

High Velocity Pulsed Wire-Arc Spray

R.W. Kincaid; F.D. Witherspoon

ITSC 2000; 663-668https://doi.org/10.31399/asm.cp.itsc2000p0663

View Articletitled, High Velocity Pulsed Wire-Arc Spray

High Velocity Pulsed Plasma Thermal Spray

F.D. Witherspoon; D.W. Massey; R.W. Kincaid; G.C. Whichard; T.A. Mozhi

ITSC 2000; 669-678https://doi.org/10.31399/asm.cp.itsc2000p0669

View Articletitled, High Velocity Pulsed Plasma Thermal Spray

Properties of Cored Wire Arc Sprayed AI/AI₂O₃ Composite Coatings

S. Ma; Y. Zhu; C. Yang

ITSC 2000; 679-683https://doi.org/10.31399/asm.cp.itsc2000p0679

View Articletitled, Properties of Cored Wire Arc Sprayed AI/AI<sub>2</sub>O<sub>3</sub> Composite Coatings

Enhanced Copper Coating Properties Obtained by Electric Wire Arc Spraying Process

V. Gourlaouen; E. Verna; P. Beaubien

ITSC 2000; 685-690https://doi.org/10.31399/asm.cp.itsc2000p0685

View Articletitled, Enhanced Copper Coating Properties Obtained by Electric Wire Arc Spraying Process

Benefits and Technology Developed to Arc Spray 3/16 Inch (4.8mm) Diameter Wires Used for Corrosion Protection of Steel

F.S. Rogers

ITSC 2000; 691-695https://doi.org/10.31399/asm.cp.itsc2000p0691

View Articletitled, Benefits and Technology Developed to Arc Spray 3/16 Inch (4.8mm) Diameter Wires Used for Corrosion Protection of Steel

Microstructure and Corrosion Behavior of Arc Sprayed Stainless Steel Coatings

T. Tajiri; Z. Zeng

ITSC 2000; 697-703https://doi.org/10.31399/asm.cp.itsc2000p0697

View Articletitled, Microstructure and Corrosion Behavior of Arc Sprayed Stainless Steel Coatings

Arc Sprayed Coatings of Ferroalloy-Base Flux-Cored Wires

A.L. Borisova; I.V. Mitz; A. Kleyman

ITSC 2000; 705-708https://doi.org/10.31399/asm.cp.itsc2000p0705

View Articletitled, Arc Sprayed Coatings of Ferroalloy-Base Flux-Cored Wires

High Definition Single-Wire-Arc-Spray

R.R. Carlson; J.V.R. Heberlein; N. Hussary; K. Shi

ITSC 2000; 709-716https://doi.org/10.31399/asm.cp.itsc2000p0709

View Articletitled, High Definition Single-Wire-Arc-Spray

New Arc Wire Approvals for Aircraft Power Plant Overhaul

E.R. Sampson; P. Sahoo

ITSC 2000; 717-719https://doi.org/10.31399/asm.cp.itsc2000p0717

View Articletitled, New Arc Wire Approvals for Aircraft Power Plant Overhaul

Formation, Impact, and Solidification of Droplets

Splashing of Nickel Droplets During Plasma Spraying

V. Pershin; I. Thomson; S. Chandra; J. Mostaghimi

ITSC 2000; 721-727https://doi.org/10.31399/asm.cp.itsc2000p0721

View Articletitled, Splashing of Nickel Droplets During Plasma Spraying

Investigation of Splat/Substrate Contact During Molybdenum Thermal Spraying

X.Y. Jiang; Y.P. Wan; X.Y. Wang; H. Zhang; R. Goswami; H. Herman; S. Sampath

ITSC 2000; 729-736https://doi.org/10.31399/asm.cp.itsc2000p0729

View Articletitled, Investigation of Splat/Substrate Contact During Molybdenum Thermal Spraying

Investigations of Arc Behavior and Particle Formation in the Wire Arc Spray Process Using High Speed Photography

N.A. Hussary; J. Heberlein

ITSC 2000; 737-742https://doi.org/10.31399/asm.cp.itsc2000p0737

View Articletitled, Investigations of Arc Behavior and Particle Formation in the Wire Arc Spray Process Using High Speed Photography

Visualization of Particle Impact in Thermal Spray

C. Escure; M. Vardelle; P. Fauchais; A. Grimaud

ITSC 2000; 743-752https://doi.org/10.31399/asm.cp.itsc2000p0743

View Articletitled, Visualization of Particle Impact in Thermal Spray

The Splat Morphology of Plasma Sprayed Particle and the Relation to Coating Property

N. Sakakibara; H. Tsukuda; A. Notomi

ITSC 2000; 753-758https://doi.org/10.31399/asm.cp.itsc2000p0753

View Articletitled, The Splat Morphology of Plasma Sprayed Particle and the Relation to Coating Property

Influence of Substrate Preheating Monitoring on Alumina Splat Formation in DC Plasma Process

J. Pech; B. Hannoyer; A. Denoirjean; P. Fauchais

ITSC 2000; 759-765https://doi.org/10.31399/asm.cp.itsc2000p0759

View Articletitled, Influence of Substrate Preheating Monitoring on Alumina Splat Formation in DC Plasma Process

Splat Formation in Off-Normal Angle Spray

H. Fukanuma; Y. Huang

ITSC 2000; 767-776https://doi.org/10.31399/asm.cp.itsc2000p0767

View Articletitled, Splat Formation in Off-Normal Angle Spray

Transient Droplet/Substrate Contact Pressure During Droplet Flattening on Flat Substrate in Plasma Spraying

C.-J. Li; J.-L. Li

ITSC 2000; 777-782https://doi.org/10.31399/asm.cp.itsc2000p0777

View Articletitled, Transient Droplet/Substrate Contact Pressure During Droplet Flattening on Flat Substrate in Plasma Spraying

Splats and Coatings of Stainless Steel Particles Coated with an Alumina Shell

H. Ageorges; P. Fauchais

ITSC 2000; 783-789https://doi.org/10.31399/asm.cp.itsc2000p0783

View Articletitled, Splats and Coatings of Stainless Steel Particles Coated with an Alumina Shell

Effect of Melting State of Spray Particles on the Adhesive Strength of HVOF Nickel-Based Alloy Coatings

C.-J. Li; Y-Y. Wang; A. Ohmori

ITSC 2000; 791-796https://doi.org/10.31399/asm.cp.itsc2000p0791

View Articletitled, Effect of Melting State of Spray Particles on the Adhesive Strength of HVOF Nickel-Based Alloy Coatings

Effect of Interface Wetting on Flattening of Freely Fallen Metal Droplet Onto Flat Substrate Surface

M. Fukumoto; E. Nishioka; T. Matsubara

ITSC 2000; 797-802https://doi.org/10.31399/asm.cp.itsc2000p0797

View Articletitled, Effect of Interface Wetting on Flattening of Freely Fallen Metal Droplet Onto Flat Substrate Surface

Nonmetallic Materials

Effects of Spraying Parameters on Phase Formation and Distribution in Plasma-Sprayed Hydroxyapatite Coatings

L. Sun; C.C. Berndt; R.S. Lima; A. Kucuk; K.A. Khor

ITSC 2000; 803-811https://doi.org/10.31399/asm.cp.itsc2000p0803

View Articletitled, Effects of Spraying Parameters on Phase Formation and Distribution in Plasma-Sprayed Hydroxyapatite Coatings

Micro-and Nano-Scaled Composites via Decomposition of Plasma Sprayed Ceramics

J. Colaizzi; B.H. Kear; W.E. Mayo; R. Shropshire; R.W. Rigney; S. Brunhouse

ITSC 2000; 813-820https://doi.org/10.31399/asm.cp.itsc2000p0813

View Articletitled, Micro-and Nano-Scaled Composites via Decomposition of Plasma Sprayed Ceramics

Fabrication of SiC Fibre Reinforced MoSi₂ Based Composites by Low Pressure Plasm a Spraying

K.H. Baik; P.S. Grant; A.R. Bhatti; R.A. Shatwell

ITSC 2000; 821-827https://doi.org/10.31399/asm.cp.itsc2000p0821

View Articletitled, Fabrication of SiC Fibre Reinforced MoSi<sub>2</sub> Based Composites by Low Pressure Plasm a Spraying

Development of Cordierite Coatings for Low Thermal Expansion Refractory Concretes

D.T. Weaver; F.S. Miller; D.C. Van Aken; J.D. Smith

ITSC 2000; 829-835https://doi.org/10.31399/asm.cp.itsc2000p0829

View Articletitled, Development of Cordierite Coatings for Low Thermal Expansion Refractory Concretes

Plasma Sprayed Ultra High Temperature Ceramics for Thermal Protection Systems

T. Valente; C. Bartuli; G. Visconti; M. Tului

ITSC 2000; 837-841https://doi.org/10.31399/asm.cp.itsc2000p0837

View Articletitled, Plasma Sprayed Ultra High Temperature Ceramics for Thermal Protection Systems

Thermally Sprayed Quasicrystal Composite Coatings for Bearings and Other Friction Threaded Applications

E. Lugscheider; C. Herbst-Dederichs; A. Reimann

ITSC 2000; 843-849https://doi.org/10.31399/asm.cp.itsc2000p0843

View Articletitled, Thermally Sprayed Quasicrystal Composite Coatings for Bearings and Other Friction Threaded Applications

Plasma Arc Spraying of Cu-Ti-Zr-Ni Amorphous Alloys

D.J. Sordelet; P. Huang; M.F. Besser; E. Lepecheva

ITSC 2000; 851-858https://doi.org/10.31399/asm.cp.itsc2000p0851

View Articletitled, Plasma Arc Spraying of Cu-Ti-Zr-Ni Amorphous Alloys

Comparison of Wear and Friction Characteristics of HVOF Sprayed WC-Co Coating and Carbon Steel

V. Kollia-Rafailidi; A. Neville

ITSC 2000; 859-864https://doi.org/10.31399/asm.cp.itsc2000p0859

View Articletitled, Comparison of Wear and Friction Characteristics of HVOF Sprayed WC-Co Coating and Carbon Steel

Vacuum Plasma Spraying of Pre-reacted MoSi₂ and SiC-Reinforced MoSi₂ Produced by a New Kind of Powder Processing

B. Wielage; S. Steinhäuser; G. Reisel; I. Morgenthal; R. Scholl

ITSC 2000; 865-869https://doi.org/10.31399/asm.cp.itsc2000p0865

View Articletitled, Vacuum Plasma Spraying of Pre-reacted MoSi<sub>2</sub> and SiC-Reinforced MoSi<sub>2</sub> Produced by a New Kind of Powder Processing

Plasma Spheroidized Alumina/Zircon Mixtures

Y. Li; K.A. Khor

ITSC 2000; 871-880https://doi.org/10.31399/asm.cp.itsc2000p0871

View Articletitled, Plasma Spheroidized Alumina/Zircon Mixtures

Plasma Technology TRIPLEX for the Deposition of Ceramic Coatings in the Industry

G. Barbezat; K. Landes

ITSC 2000; 881-885https://doi.org/10.31399/asm.cp.itsc2000p0881

View Articletitled, Plasma Technology TRIPLEX for the Deposition of Ceramic Coatings in the Industry

Process Techniques

Powder Spheroidization Using Induction Plasma Technology

N.M. Dignard; M.I. Boulos

ITSC 2000; 887-893https://doi.org/10.31399/asm.cp.itsc2000p0887

View Articletitled, Powder Spheroidization Using Induction Plasma Technology

Thermal Spray Processing of WC-Co Nanomaterials

J. Voyer; B.R. Marple

ITSC 2000; 895-904https://doi.org/10.31399/asm.cp.itsc2000p0895

View Articletitled, Thermal Spray Processing of WC-Co Nanomaterials

Post-Processing of Cold-Spray Deposits of Copper and Iron

R.C. McCune; R.P. Cooper; O.O. Popoola

ITSC 2000; 905-908https://doi.org/10.31399/asm.cp.itsc2000p0905

View Articletitled, Post-Processing of Cold-Spray Deposits of Copper and Iron

Improved Wear Performance by the Incorporation of Solid Lubricants During Thermal Spraying

B.R. Marple; J. Voyer

ITSC 2000; 909-918https://doi.org/10.31399/asm.cp.itsc2000p0909

View Articletitled, Improved Wear Performance by the Incorporation of Solid Lubricants During Thermal Spraying

SiC Coating Synthesis by RF Induction Plasma Spraying from Liquid Silane Precursor

E. Bouyer; M. Müller; R.H. Henne; G. Schiller

ITSC 2000; 919-928https://doi.org/10.31399/asm.cp.itsc2000p0919

View Articletitled, SiC Coating Synthesis by RF Induction Plasma Spraying from Liquid Silane Precursor

SOFC/CeO₂ Doped Electrolyte Deposition Using Suspension Plasma Spraying

M. Bonneau; F. Gitzhofer; M. Boulos

ITSC 2000; 929-934https://doi.org/10.31399/asm.cp.itsc2000p0929

View Articletitled, SOFC/CeO<sub>2</sub> Doped Electrolyte Deposition Using Suspension Plasma Spraying

Vacuum Plasma Spray Deposition of Spherical Plasma Atomized Ti-6AI-4V

T.A. Brzezinski; S. Grenier; M.E. Smagorinski; G.E. Kim

ITSC 2000; 935-939https://doi.org/10.31399/asm.cp.itsc2000p0935

View Articletitled, Vacuum Plasma Spray Deposition of Spherical Plasma Atomized Ti-6AI-4V

High Velocity Wire Flame Spraying (HVWFS) of Molybdenum

Fr.-W. Bach; T. Copitzky; Z. Babiak; T. Duda

ITSC 2000; 941-944https://doi.org/10.31399/asm.cp.itsc2000p0941

View Articletitled, High Velocity Wire Flame Spraying (HVWFS) of Molybdenum

Plasma Spraying of Titanates I

P. Ctibor; P. Rohan; K. Neufuss; B. Kolman; J. Dubsky; P. Chraska

ITSC 2000; 945-950https://doi.org/10.31399/asm.cp.itsc2000p0945

View Articletitled, Plasma Spraying of Titanates I

An Electromagnetic Acceleration Plasma Generator for Titanium Nitride Reactive Spray Coatings

T. Shibata; H. Tahara; T. Yasui; Y. Kagaya; T. Yoshikawa

ITSC 2000; 951-955https://doi.org/10.31399/asm.cp.itsc2000p0951

View Articletitled, An Electromagnetic Acceleration Plasma Generator for Titanium Nitride Reactive Spray Coatings

The Optimizing of the Superficial Cold-Burst Hardening Process of the Inner Cylindrical Metallic Surfaces by Knocking with Centrifuged Balls

D. Bulancea; V. Bulancea; I. Alexandru; D. Condurache

ITSC 2000; 957-962https://doi.org/10.31399/asm.cp.itsc2000p0957

View Articletitled, The Optimizing of the Superficial Cold-Burst Hardening Process of the Inner Cylindrical Metallic Surfaces by Knocking with Centrifuged Balls

Novel Concept for Totally Integrated Automation (TIA) Using Siemens Bus System and WinCC Online Control

T. Frederking; R. Gadow

ITSC 2000; 963-966https://doi.org/10.31399/asm.cp.itsc2000p0963

View Articletitled, Novel Concept for Totally Integrated Automation (TIA) Using Siemens Bus System and WinCC Online Control

Development of Tailored Metallographic Preparation Techniques for Thermally Sprayed Coatings

E. Kharlanova; S. Lafrenière; G.E. Kim; T.A. Brzezinski

ITSC 2000; 967-970https://doi.org/10.31399/asm.cp.itsc2000p0967

View Articletitled, Development of Tailored Metallographic Preparation Techniques for Thermally Sprayed Coatings

Wear and Corrosion

On the Influence of Powder Feed Structure on Wear Properties of HVOF Sprayed WC/Co Hardcoatings

G. Skandan; M. Jain; T.E. Fischer; B.H. Kear; W.R. Rigney; R. Shropshire; S. Brunhouse

ITSC 2000; 971-976https://doi.org/10.31399/asm.cp.itsc2000p0971

View Articletitled, On the Influence of Powder Feed Structure on Wear Properties of HVOF Sprayed WC/Co Hardcoatings

Abrasive Wear Resistance of Plasma-Sprayed Glass-Composite Coatings

D.T. Gawne; Z. Qiu; T. Zhang; Y. Bao; K. Zhang

ITSC 2000; 977-981https://doi.org/10.31399/asm.cp.itsc2000p0977

View Articletitled, Abrasive Wear Resistance of Plasma-Sprayed Glass-Composite Coatings

Performance of HVOF-Sprayed Carbide Coatings in Aqueous Corrosive Environments

S. Simard; B. Arsenault; K. Laul; M.R. Dorfman

ITSC 2000; 983-990https://doi.org/10.31399/asm.cp.itsc2000p0983

View Articletitled, Performance of HVOF-Sprayed Carbide Coatings in Aqueous Corrosive Environments

The Development of Corrosion Resistant Coatings by HVOF Spraying

D. Harvey; O. Lunder; R. Henriksen

ITSC 2000; 991-997https://doi.org/10.31399/asm.cp.itsc2000p0991

View Articletitled, The Development of Corrosion Resistant Coatings by HVOF Spraying

Wear Resistance of Laser Alloyed ZrB₂ Coatings on Mild Steel

A. Gadkari; A.S. Khanna; N.B. Dahotre

ITSC 2000; 999-1004https://doi.org/10.31399/asm.cp.itsc2000p0999

View Articletitled, Wear Resistance of Laser Alloyed ZrB<sub>2</sub> Coatings on Mild Steel

Cyclic and Isothermal Oxidation at 1200°C of HVOF NiCrAlY Sprayed Coatings

S. Serghini; S. Dallaire

ITSC 2000; 1005-1009https://doi.org/10.31399/asm.cp.itsc2000p1005

View Articletitled, Cyclic and Isothermal Oxidation at 1200°C of HVOF NiCrAlY Sprayed Coatings

The Electrochemical Corrosion Behavior of HVOF Sprayed Coatings

A.J. Sturgeon; D.C. Buxton

ITSC 2000; 1011-1015https://doi.org/10.31399/asm.cp.itsc2000p1011

View Articletitled, The Electrochemical Corrosion Behavior of HVOF Sprayed Coatings

Ten Year Interim Report of Thermal Sprayed Zn, Al, and Zn-Al Coatings Exposed to Marine Corrosion by Japan Association of Corrosion Control

S. Kuroda; M. Takemoto

ITSC 2000; 1017-1024https://doi.org/10.31399/asm.cp.itsc2000p1017

View Articletitled, Ten Year Interim Report of Thermal Sprayed Zn, Al, and Zn-Al Coatings Exposed to Marine Corrosion by Japan Association of Corrosion Control

Aqueous Corrosion Behavior of Thermally Sprayed Coatings for Steel Substrate

K. Tani; M. Adachi; A. Nakahira; Y. Takatani

ITSC 2000; 1025-1031https://doi.org/10.31399/asm.cp.itsc2000p1025

View Articletitled, Aqueous Corrosion Behavior of Thermally Sprayed Coatings for Steel Substrate

Some Aspects of the Erosion and Corrosion Behavior of a WC-Co-Cr HVOF Sprayed Coating

J.M. Perry; T. Hodgkiess; A. Neville

ITSC 2000; 1033-1038https://doi.org/10.31399/asm.cp.itsc2000p1033

View Articletitled, Some Aspects of the Erosion and Corrosion Behavior of a WC-Co-Cr HVOF Sprayed Coating

High Velocity Arc Spray–Superior Surface Anti-Corrosion Technology

X. Binshi; L. Shican; M.A. Shining; Z. Zhenxue

ITSC 2000; 1039-1043https://doi.org/10.31399/asm.cp.itsc2000p1039

View Articletitled, High Velocity Arc Spray–Superior Surface Anti-Corrosion Technology

Arc Spraying for the Production of Multi-Component Zinc Anodes for Corrosion Protection of Concrete Structures

M. Knepper; A. Melzer; J. Spriestersbach; J. Wisniewski; A. Winkels

ITSC 2000; 1045-1049https://doi.org/10.31399/asm.cp.itsc2000p1045

View Articletitled, Arc Spraying for the Production of Multi-Component Zinc Anodes for Corrosion Protection of Concrete Structures

Development of Highly Wear Resistant Coatings for Deflector Blades in Paper Industry

A. Fritsch; R. Gadow; A. Killinger

ITSC 2000; 1051-1055https://doi.org/10.31399/asm.cp.itsc2000p1051

View Articletitled, Development of Highly Wear Resistant Coatings for Deflector Blades in Paper Industry

Porosity

Thermal Conductivity Behavior of Sol-Gel Post-Treated Thermal Barrier Coatings

C.R.C. Lima; U. Senturk; R.S. Lima; C.C. Berndt

ITSC 2000; 1057-1060https://doi.org/10.31399/asm.cp.itsc2000p1057

View Articletitled, Thermal Conductivity Behavior of Sol-Gel Post-Treated Thermal Barrier Coatings

Porosity-Thermal Conductivity Relationships in Plasma Sprayed Zirconia Coatings

A.A. Kulkarni; S. Sampath; A. Goland; H. Herman

ITSC 2000; 1061-1066https://doi.org/10.31399/asm.cp.itsc2000p1061

View Articletitled, Porosity-Thermal Conductivity Relationships in Plasma Sprayed Zirconia Coatings

Applications

Relation Between Thermal Expansion Coefficient and Porosity in Thick Zircon and Alumina Coatings

P. Rohan; P. Chraska; P. Ctibor; K. Neufuss

ITSC 2000; 1067-1070https://doi.org/10.31399/asm.cp.itsc2000p1067

View Articletitled, Relation Between Thermal Expansion Coefficient and Porosity in Thick Zircon and Alumina Coatings

Application of Plane Fractal Geometry to Adhesion Strength of Thermal Sprayed Coatings

S. Amada; T. Hirose

ITSC 2000; 1071-1076https://doi.org/10.31399/asm.cp.itsc2000p1071

View Articletitled, Application of Plane Fractal Geometry to Adhesion Strength of Thermal Sprayed Coatings

Painting of Arc Sprayed Zinc Coatings with Water-Based Paints

R.T. Lahtinen; P.J.T. Jokinen

ITSC 2000; 1077-1080https://doi.org/10.31399/asm.cp.itsc2000p1077

View Articletitled, Painting of Arc Sprayed Zinc Coatings with Water-Based Paints

Effect of Aluminum Phosphate Sealing Treatment on Properties of Thick Thermal Barrier Coatings

S. Ahmaniemi; E. Rajamäki; P. Vuoristo; T. Mäntylä

ITSC 2000; 1081-1086https://doi.org/10.31399/asm.cp.itsc2000p1081

View Articletitled, Effect of Aluminum Phosphate Sealing Treatment on Properties of Thick Thermal Barrier Coatings

An Overview of Compressor Abradables

R.K. Schmid; F. Ghasripoor; M. Dorfman; X. Wei

ITSC 2000; 1087-1093https://doi.org/10.31399/asm.cp.itsc2000p1087

View Articletitled, An Overview of Compressor Abradables

Sliding Wear Behavior as a Criterion for Replacement of Chromium Electroplate by Tungsten Carbide (WC) Thermal Spray Coatings in Aircraft Applications

A.C. Savarimuthu; I. Megat; H.F. Taber; J.R. Shadley; E.F. Rybicki; W.A. Emery; J.D. Nuse; D.A. Somerville

ITSC 2000; 1095-1104https://doi.org/10.31399/asm.cp.itsc2000p1095

View Articletitled, Sliding Wear Behavior as a Criterion for Replacement of Chromium Electroplate by Tungsten Carbide (WC) Thermal Spray Coatings in Aircraft Applications

Near Net Shape Spray Forming—Metals

T. McKechnie

ITSC 2000; 1105-1116https://doi.org/10.31399/asm.cp.itsc2000p1105

View Articletitled, Near Net Shape Spray Forming—Metals

Case Studies in Wear Resistance Using HVOF, PTAW, and Spray Fusion Surfacing

K.W.D. Hart; D.H. Harper; M.J. Gill

ITSC 2000; 1117-1125https://doi.org/10.31399/asm.cp.itsc2000p1117

View Articletitled, Case Studies in Wear Resistance Using HVOF, PTAW, and Spray Fusion Surfacing

Cavitation Resistant Thermal Spray Coatings on Diesel Engine Parts

Y. Borisov; V. Bogush

ITSC 2000; 1127-1130https://doi.org/10.31399/asm.cp.itsc2000p1127

View Articletitled, Cavitation Resistant Thermal Spray Coatings on Diesel Engine Parts

Practical Applications of Spray Plume Sensors in the Aeronautic and Automotive Industries

F. Nadeau; L. Pouliot; J. Blain

ITSC 2000; 1131-1134https://doi.org/10.31399/asm.cp.itsc2000p1131

View Articletitled, Practical Applications of Spray Plume Sensors in the Aeronautic and Automotive Industries

Tribological Requirements of Thermally Sprayed Coatings for Wear Resistant Applications

S.D. Siegmann; O.C. Brandt; N.M. Margadant

ITSC 2000; 1135-1140https://doi.org/10.31399/asm.cp.itsc2000p1135

View Articletitled, Tribological Requirements of Thermally Sprayed Coatings for Wear Resistant Applications

Characteristics and Potential Application of Thermally Sprayed Thin Film Coatings

M. Loch; G. Barbezat

ITSC 2000; 1141-1144https://doi.org/10.31399/asm.cp.itsc2000p1141

View Articletitled, Characteristics and Potential Application of Thermally Sprayed Thin Film Coatings

Hard Chrome Replacement and Other Thermal Spray Applications in the Chilean Navy

J. Streeter; E.R. Sampson

ITSC 2000; 1145-1148https://doi.org/10.31399/asm.cp.itsc2000p1145

View Articletitled, Hard Chrome Replacement and Other Thermal Spray Applications in the Chilean Navy

Thermal Spray Coatings for Ball Valves Used in Nickel/Cobalt Pressure Acid Leaching

G.E. Kim; T.A. Brzezinski; L. Leblanc; E. Kharlanova

ITSC 2000; 1149-1153https://doi.org/10.31399/asm.cp.itsc2000p1149

View Articletitled, Thermal Spray Coatings for Ball Valves Used in Nickel/Cobalt Pressure Acid Leaching

Atmospheric Plasma Spraying of Run-in Coatings for Twin-Screw Compressors

Fr.-W. Bach; T. Duda; W. Unterberg; L.A. Josefiak

ITSC 2000; 1155-1157https://doi.org/10.31399/asm.cp.itsc2000p1155

View Articletitled, Atmospheric Plasma Spraying of Run-in Coatings for Twin-Screw Compressors

Observation on the WC-Co Coating Used in a Zinc Pot of a Continuous Galvanizing Line

B.G. Seong; S.Y. Hwang; M.C. Kim; K.Y. Kim

ITSC 2000; 1159-1167https://doi.org/10.31399/asm.cp.itsc2000p1159

View Articletitled, Observation on the WC-Co Coating Used in a Zinc Pot of a Continuous Galvanizing Line

PTA Reclamation of Cast Iron Substrates Using Tape Casting Process—The Role of the Organic Binder Concentration

M. Leylavergne; T. Chartier; A. Grimaud; P. Fauchais

ITSC 2000; 1169-1177https://doi.org/10.31399/asm.cp.itsc2000p1169

View Articletitled, PTA Reclamation of Cast Iron Substrates Using Tape Casting Process—The Role of the Organic Binder Concentration

Thermal Barrier and High Temperature Coatings

Evaluation of CeSZ Thermal Barrier Coatings for Diesels

P.J. Huang; J.J. Swab; P.J. Patel; W.S. Chu

ITSC 2000; 1179-1183https://doi.org/10.31399/asm.cp.itsc2000p1179

View Articletitled, Evaluation of CeSZ Thermal Barrier Coatings for Diesels

Thermal-Spray Yttria-Stabilized Zirconia Phase Changes During Annealing

J. Ilavsky; J. Wallace; J.K. Stalick

ITSC 2000; 1185-1189https://doi.org/10.31399/asm.cp.itsc2000p1185

View Articletitled, Thermal-Spray Yttria-Stabilized Zirconia Phase Changes During Annealing

High Temperature Erosion Properties of Thermal Barrier Coatings Produced by Acetylene Sprayed High Velocity Oxygen Fuel Process

M.A. Cole; R. Walker

ITSC 2000; 1191-1199https://doi.org/10.31399/asm.cp.itsc2000p1191

View Articletitled, High Temperature Erosion Properties of Thermal Barrier Coatings Produced by Acetylene Sprayed High Velocity Oxygen Fuel Process

Correlation Between Deposition Efficiency, Hardness, and Elastic Modulus for Thermally Sprayed Zirconia

R.S. Lima; A. Kucuk; C.C. Berndt

ITSC 2000; 1201-1205https://doi.org/10.31399/asm.cp.itsc2000p1201

View Articletitled, Correlation Between Deposition Efficiency, Hardness, and Elastic Modulus for Thermally Sprayed Zirconia

On the Experimental Correlation Between Plasma Spray Process Conditions and Yttria Partially Stabilized Zirconia Coatings Properties

A. Scrivani; U. Bardi; N. Antolotti; S. Bertini; R. Groppetti

ITSC 2000; 1207-1210https://doi.org/10.31399/asm.cp.itsc2000p1207

View Articletitled, On the Experimental Correlation Between Plasma Spray Process Conditions and Yttria Partially Stabilized Zirconia Coatings Properties

Characterization of Mechanical Properties of TBCs via a Taguchi Experimental Design

A. Kucuk; C.C. Berndt; U. Senturk; R.S. Lima

ITSC 2000; 1211-1217https://doi.org/10.31399/asm.cp.itsc2000p1211

View Articletitled, Characterization of Mechanical Properties of TBCs via a Taguchi Experimental Design

Lanthane Aluminate—A New Material for Atmospheric Plasma Spraying of Advanced Thermal Barrier Coatings

C.J. Friedrich; R. Gadow; T. Schirmer

ITSC 2000; 1219-1226https://doi.org/10.31399/asm.cp.itsc2000p1219

View Articletitled, Lanthane Aluminate—A New Material for Atmospheric Plasma Spraying of Advanced Thermal Barrier Coatings

Synthesis, Thermo-Mechanical Properties, and Frictional Response of NiCrAlY-Zirconia Composite and Graded Coatings

S. Sampath; L. Prchlik; K. Kishi

ITSC 2000; 1227-1232https://doi.org/10.31399/asm.cp.itsc2000p1227

View Articletitled, Synthesis, Thermo-Mechanical Properties, and Frictional Response of NiCrAlY-Zirconia Composite and Graded Coatings

Study on the Long-Term Stability of Plasma Spraying

L. Leblanc; C. Moreau

ITSC 2000; 1233-1239https://doi.org/10.31399/asm.cp.itsc2000p1233

View Articletitled, Study on the Long-Term Stability of Plasma Spraying

Properties of Plasma Sprayed Functionally Graded YSZ/NiCoCrAlY Composite Coatings

K.A. Khor; Y.W. Gu; Z.L. Dong

ITSC 2000; 1241-1248https://doi.org/10.31399/asm.cp.itsc2000p1241

View Articletitled, Properties of Plasma Sprayed Functionally Graded YSZ/NiCoCrAlY Composite Coatings

Extension of Life of Thermal Barrier Sprayed Coatings by Incorporating MoSi₂

K. Sonoya; S. Tobe

ITSC 2000; 1249-1253https://doi.org/10.31399/asm.cp.itsc2000p1249

View Articletitled, Extension of Life of Thermal Barrier Sprayed Coatings by Incorporating MoSi<sub>2</sub>

Acoustic Emission Techniques for the Nondestructive Evaluation of TBCs Under Thermal Cycling Conditions

P. Robin; F. Gitzhofer; M.I. Boulos

ITSC 2000; 1255-1263https://doi.org/10.31399/asm.cp.itsc2000p1255

View Articletitled, Acoustic Emission Techniques for the Nondestructive Evaluation of TBCs Under Thermal Cycling Conditions

Influence of Starting Powder Properties on Thermal Barrier Coatings

W. Malléner; K.-H. Rauwald; R. Vaßen

ITSC 2000; 1265-1271https://doi.org/10.31399/asm.cp.itsc2000p1265

View Articletitled, Influence of Starting Powder Properties on Thermal Barrier Coatings

The Isothermal Oxidation Behaviors of APS NiCrAlY Bond Coatings

H.S. Choi; J.Y. Moon; C.H. Lee

ITSC 2000; 1273-1279https://doi.org/10.31399/asm.cp.itsc2000p1273

View Articletitled, The Isothermal Oxidation Behaviors of APS NiCrAlY Bond Coatings

Quality, Standards, and Testing

Photothermal Radiometry of Thermal Spray Coatings: Thermophysical Properties and Disbonding Effects Characterization

A. Mandelis; J.A. Garcia; B. Farahbarhsh

ITSC 2000; 1281-1289https://doi.org/10.31399/asm.cp.itsc2000p1281

View Articletitled, Photothermal Radiometry of Thermal Spray Coatings: Thermophysical Properties and Disbonding Effects Characterization

An ASM Recommended Practice for Evaluation of Young’s Modulus and Poisson’s Ratio of Thermal Spray Coatings Bonded to a Substrate

J.R. Shadley; E.F. Rybicki; Y. Xiong; R.T.R. McGrann; A.C. Savarimuthu

ITSC 2000; 1291-1295https://doi.org/10.31399/asm.cp.itsc2000p1291

View Articletitled, An ASM Recommended Practice for Evaluation of Young’s Modulus and Poisson’s Ratio of Thermal Spray Coatings Bonded to a Substrate

The Effect of HFPD Thermally Sprayed WC-Co Coatings on the Fatigue Behavior and Deformation of Al 2024-T4

A. Ibrahim; C.C. Berndt

ITSC 2000; 1297-1301https://doi.org/10.31399/asm.cp.itsc2000p1297

View Articletitled, The Effect of HFPD Thermally Sprayed WC-Co Coatings on the Fatigue Behavior and Deformation of Al 2024-T4

Advanced Thermal Spray Coatings for Fatigue Sensitive Applications

J. Quets

ITSC 2000; 1303-1307https://doi.org/10.31399/asm.cp.itsc2000p1303

View Articletitled, Advanced Thermal Spray Coatings for Fatigue Sensitive Applications

Development of Machine Element OEM and Repair Specifications

E.R. Sampson; R. Sulit

ITSC 2000; 1309-1312https://doi.org/10.31399/asm.cp.itsc2000p1309

View Articletitled, Development of Machine Element OEM and Repair Specifications

Standards for the Thermal Spray Industry

M.M. Bhusari; R.A. Sulit

ITSC 2000; 1313-1317https://doi.org/10.31399/asm.cp.itsc2000p1313

View Articletitled, Standards for the Thermal Spray Industry

Deposition and Testing of Thermal Barrier Coatings on Gas Turbine Vanes

M. Tului; G.C. Gualco; R. Scarpellini

ITSC 2000; 1319-1323https://doi.org/10.31399/asm.cp.itsc2000p1319

View Articletitled, Deposition and Testing of Thermal Barrier Coatings on Gas Turbine Vanes

Development and Performance Evaluation of Thick Air Plasma Sprayed Thermal Barrier Coatings

Z.Z. Mutasim; Y.L. Nava

ITSC 2000; 1325-1330https://doi.org/10.31399/asm.cp.itsc2000p1325

View Articletitled, Development and Performance Evaluation of Thick Air Plasma Sprayed Thermal Barrier Coatings

Characterization of Thermal Sprayed Coatings with Lock-In Thermography

B. Wielage; U. Hofmann

ITSC 2000; 1331-1334https://doi.org/10.31399/asm.cp.itsc2000p1331

View Articletitled, Characterization of Thermal Sprayed Coatings with Lock-In Thermography

Characterization of Cracking Within WC-Co Coated Materials by an Acoustic Emission Method During Four Points Bending Tests

D. Dalmas; S. Benmedakhene; C. Richard; A. Laksimi; T. Gregoire

ITSC 2000; 1335-1340https://doi.org/10.31399/asm.cp.itsc2000p1335

View Articletitled, Characterization of Cracking Within WC-Co Coated Materials by an Acoustic Emission Method During Four Points Bending Tests

X-Rays and TEM Characterization of Nanocrystalline Iron Aluminide Coatings Prepared by HVOF Thermal Spraying

T. Grosdidier; H.L. Liao; A. Tidu

ITSC 2000; 1341-1344https://doi.org/10.31399/asm.cp.itsc2000p1341

View Articletitled, X-Rays and TEM Characterization of Nanocrystalline Iron Aluminide Coatings Prepared by HVOF Thermal Spraying

A Critical Evaluation of the Employment of Microhardness Techniques for Characterizing and Optimizing Thermal Spray Coatings

M. Factor; I. Roman

ITSC 2000; 1345-1354https://doi.org/10.31399/asm.cp.itsc2000p1345

View Articletitled, A Critical Evaluation of the Employment of Microhardness Techniques for Characterizing and Optimizing Thermal Spray Coatings

What Role Do Industrial Gases Play in the Quality of Thermal Spraying

W. Kroemmer; P. Heinrich

ITSC 2000; 1355-1360https://doi.org/10.31399/asm.cp.itsc2000p1355

View Articletitled, What Role Do Industrial Gases Play in the Quality of Thermal Spraying

Optimization of the Characterization of Thermal Spray Coatings

V. Begon; J. Baudoin; O. Dugne

ITSC 2000; 1361-1369https://doi.org/10.31399/asm.cp.itsc2000p1361

View Articletitled, Optimization of the Characterization of Thermal Spray Coatings

Additional Papers

Plasma Spraying of Spray-Dried AI₂O₃ Powders

G. Bertrand; B. Hansz; F. Tourenne; C. Coddet

ITSC 2000; 1371-1376https://doi.org/10.31399/asm.cp.itsc2000p1371

View Articletitled, Plasma Spraying of Spray-Dried AI<sub>2</sub>O<sub>3</sub> Powders

Thermal Effects on the Structure and Characteristics of Plasma Sprayed Self-Fluxing Alloys

G. Bertrand; C. Malavolta; F. Tourenne; B. Hansz; C. Coddet; V. Gourlaouen

ITSC 2000; 1377-1381https://doi.org/10.31399/asm.cp.itsc2000p1377

View Articletitled, Thermal Effects on the Structure and Characteristics of Plasma Sprayed Self-Fluxing Alloys

On-Line Control of Particle Spray Jet and Residual Stresses in Plasma Sprays

T. Renault; M. Vardelle; A. Grimaud; P. Fauchais; H. Hoffman

ITSC 2000; 1383-1391https://doi.org/10.31399/asm.cp.itsc2000p1383

View Articletitled, On-Line Control of Particle Spray Jet and Residual Stresses in Plasma Sprays

Volume Information

Preface

ITSC 2000; iii-vihttps://doi.org/10.31399/asm.cp.itsc2000fm01

View Articletitled, Preface

Thermal Spray Hall of Fame Inductees

ITSC 2000; ixhttps://doi.org/10.31399/asm.cp.itsc2000fm03

View Articletitled, Thermal Spray Hall of Fame Inductees

ITSC 2000 Organizing Committee

ITSC 2000; vii-viiihttps://doi.org/10.31399/asm.cp.itsc2000fm02

View Articletitled, ITSC 2000 Organizing Committee