Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 1999: Proceedings from the United Thermal Spray Conference

Keynote Address

Development of the Thermal Spray (TS) Industry Into Year 2000 From a Spray Shop Point of View

Chr. Wasserman

ITSC 1999; 1-4https://doi.org/10.31399/asm.cp.itsc1999p0001

View Articletitled, Development of the Thermal Spray (TS) Industry Into Year 2000 From a Spray Shop Point of View

Combustion Engine Applications

Instandsetzung von verschleißgeschädigten Zylinderoberflächen durch Thermisches Spritzen (Repair of Damaged Cylinder Surfaces by Thermal Spraying)

K. Ebert; H. Königshofen; M. Osthoff; C. Verpoort; H. Poredda; U. Gebauer; G. Kissner; H. Gedon

ITSC 1999; 5-9https://doi.org/10.31399/asm.cp.itsc1999p0005

View Articletitled, Instandsetzung von verschleißgeschädigten Zylinderoberflächen durch Thermisches Spritzen (Repair of Damaged Cylinder Surfaces by Thermal Spraying)

The Advantages of the Plasma Spray Process for the Coating of Cylinder Bores on ALSi Cast Alloy in the Automotive Industry

G. Barbezat; S. Keller; G. Wuest

ITSC 1999; 10-14https://doi.org/10.31399/asm.cp.itsc1999p0010

View Articletitled, The Advantages of the Plasma Spray Process for the Coating of Cylinder Bores on ALSi Cast Alloy in the Automotive Industry

Spray Forming Composite Combustion Chamber Structures

J. Vlcek; H. Huber; J. Kretschmer; T. Schenkel; H. Voggenreiter

ITSC 1999; 15-19https://doi.org/10.31399/asm.cp.itsc1999p0015

View Articletitled, Spray Forming Composite Combustion Chamber Structures

Evaluation of Molybdenum-Based Silicides in a Combustion and Endothermic Environment

R. G. Castro; R. U. Vaidya; A. Ayala; B. D. Bartram; D. E. Gallegos; H. S. Kurek

ITSC 1999; 20-24https://doi.org/10.31399/asm.cp.itsc1999p0020

View Articletitled, Evaluation of Molybdenum-Based Silicides in a Combustion and Endothermic Environment

Special Applications

New Coating Systems for Biomedical Implants

S. Kyeck; B. Nitoumbi; Chr. Wasserman

ITSC 1999; 25-26https://doi.org/10.31399/asm.cp.itsc1999p0025

View Articletitled, New Coating Systems for Biomedical Implants

Plasma Spraying of Hydroxyapatite/Ti-6AI-4V Composite Coatings

C. H. Quek; K. A. Khor; P. Cheang

ITSC 1999; 27-31https://doi.org/10.31399/asm.cp.itsc1999p0027

View Articletitled, Plasma Spraying of Hydroxyapatite/Ti-6AI-4V Composite Coatings

Vakuumplasmaspritzen hartmagnetischer Schichten auf Nd-Fe-B-Basis (Vacuum Plasma Spraying of Hard Magnetic Coatings Based on Neodymium-Iron-Boron)

Fr.-W. Bach; T. Duda; W. Unterberg; G. Rieger; J. Wecker; W. Rodewald; W. Sattler

ITSC 1999; 32-34https://doi.org/10.31399/asm.cp.itsc1999p0032

View Articletitled, Vakuumplasmaspritzen hartmagnetischer Schichten auf Nd-Fe-B-Basis (Vacuum Plasma Spraying of Hard Magnetic Coatings Based on Neodymium-Iron-Boron)

Microstructure-Properties Relationship

Synthetisierte Verbundpulver für das thermische Spritzen (Synthesized Composite Powders for Thermal Spraying)

A. Ilyuschenko; T. Azarova; B. Wielage; S. Steinhäuser; U. Hofmann

ITSC 1999; 35-38https://doi.org/10.31399/asm.cp.itsc1999p0035

View Articletitled, Synthetisierte Verbundpulver für das thermische Spritzen (Synthesized Composite Powders for Thermal Spraying)

Potentiodynamic Corrosion Testing of HVOF Sprayed Stainless Steel Alloy

C. M. Eminoglu; R. Knight; J. DeFalco; M. Dorfman

ITSC 1999; 39-44https://doi.org/10.31399/asm.cp.itsc1999p0039

View Articletitled, Potentiodynamic Corrosion Testing of HVOF Sprayed Stainless Steel Alloy

Mechanisms of Oxidation of Thermally Sprayed Coatings

V. V. Sobolev; J. M. Guilemany

ITSC 1999; 45-50https://doi.org/10.31399/asm.cp.itsc1999p0045

View Articletitled, Mechanisms of Oxidation of Thermally Sprayed Coatings

Corrosion and Wear Resistance of WC Based Coatings with High Alloy Binders

J. Berget; T. Rogne; T. Solem

ITSC 1999; 51-56https://doi.org/10.31399/asm.cp.itsc1999p0051

View Articletitled, Corrosion and Wear Resistance of WC Based Coatings with High Alloy Binders

Microstructure-Wear Resistance Relationships for YSZ and Alumina Plasma-Sprayed Deposits

J. Ilavsky; H. Boukari

ITSC 1999; 57-62https://doi.org/10.31399/asm.cp.itsc1999p0057

View Articletitled, Microstructure-Wear Resistance Relationships for YSZ and Alumina Plasma-Sprayed Deposits

Thermal Spray Coating for Food Processing: The Problem of Compatibility and Migration Tests

A. Scrivani; N. Antolotti; S. Bertini; R. Groppetti; T. Gutema; A. Mangia; C. Mucchino; G. Rizzi

ITSC 1999; 63-68https://doi.org/10.31399/asm.cp.itsc1999p0063

View Articletitled, Thermal Spray Coating for Food Processing: The Problem of Compatibility and Migration Tests

Energy Generation

Separation and Insulating Layers of Atmospheric Plasma-Sprayed Ceramics for High Temperature Fuel Cells - Development and Implementation

T. Jansing; R. Fleck; J. Decker; C. Verpoort

ITSC 1999; 69-75https://doi.org/10.31399/asm.cp.itsc1999p0069

View Articletitled, Separation and Insulating Layers of Atmospheric Plasma-Sprayed Ceramics for High Temperature Fuel Cells - Development and Implementation

Spray Forming of FeSi₂ Thermoelectric Device

K. Ueno; S. Sodeoka; M. Suzuki; T. Inoue; H. Yamada; A. Tsutsumi; K. Kuramoto; J. Sawazaki; K. Yoshida; H. Huang; K. Nagai; H. Kondoh; S. Nakahama

ITSC 1999; 76-81https://doi.org/10.31399/asm.cp.itsc1999p0076

View Articletitled, Spray Forming of FeSi<sub>2</sub> Thermoelectric Device

Surface Protection of Components for Hydro Power Stations

S. Gustafsson; Chr. Wasserman; L. Chapuis

ITSC 1999; 82-85https://doi.org/10.31399/asm.cp.itsc1999p0082

View Articletitled, Surface Protection of Components for Hydro Power Stations

Practical Aspects

Metallische Beschichtungen zum Schutz gegen schweren Verschleiß (Metallic Coatings for Heavy-Wear-Protection)

H. Reimann

ITSC 1999; 86-89https://doi.org/10.31399/asm.cp.itsc1999p0086

View Articletitled, Metallische Beschichtungen zum Schutz gegen schweren Verschleiß (Metallic Coatings for Heavy-Wear-Protection)

Neue Entwicklungen beim thermischen Spritzen - Systeme, Spritzwerkstoffe und Anwendungen (New Developments for Thermal Spray Systems, Materials and Applications)

H. Kreye; A. Kirsten; R. Schwetzke

ITSC 1999; 90-94https://doi.org/10.31399/asm.cp.itsc1999p0090

View Articletitled, Neue Entwicklungen beim thermischen Spritzen - Systeme, Spritzwerkstoffe und Anwendungen (New Developments for Thermal Spray Systems, Materials and Applications)

Technische Gase beim thermisches Spritzen – von der Herstellung bis zum Einsatz mit der erforderlichen Reinheit (Industrial Gases for Thermal Spraying – From Production to Application, with the Required Purity)

P. Heinrich; Ch. Penszior; H. Meinaß

ITSC 1999; 95-105https://doi.org/10.31399/asm.cp.itsc1999p0095

View Articletitled, Technische Gase beim thermisches Spritzen – von der Herstellung bis zum Einsatz mit der erforderlichen Reinheit (Industrial Gases for Thermal Spraying – From Production to Application, with the Required Purity)

Thermally Sprayed Zinc Coatings for the Corrosion Protection of Concrete Structures

M. Knepper; J. Spriestersbach; J. Wisniewski

ITSC 1999; 106-110https://doi.org/10.31399/asm.cp.itsc1999p0106

View Articletitled, Thermally Sprayed Zinc Coatings for the Corrosion Protection of Concrete Structures

Wiederverwertung aufbereiteter Schleifschlämme durch thermisches Spritzen (Re-Usage of Upgraded Grinding Muds by Thermal Spraying)

A. Schulz; J. Eckebrecht; M. Weber; H. Grützner

ITSC 1999; 111-116https://doi.org/10.31399/asm.cp.itsc1999p0111

View Articletitled, Wiederverwertung aufbereiteter Schleifschlämme durch thermisches Spritzen (Re-Usage of Upgraded Grinding Muds by Thermal Spraying)

Wear

Investigation of Thermal Spray Coatings for Applications with Abrasion, Erosion, Corrosion and Cavitation Wear

K. Berreth; M. Buchmann; R. Gadow

ITSC 1999; 117-121https://doi.org/10.31399/asm.cp.itsc1999p0117

View Articletitled, Investigation of Thermal Spray Coatings for Applications with Abrasion, Erosion, Corrosion and Cavitation Wear

Tungsten Carbide-Based Coatings as Alternatives to Electrodeposited Hard Chromium

B.R. Marple; J. Voyer; S. Simard

ITSC 1999; 122-127https://doi.org/10.31399/asm.cp.itsc1999p0122

View Articletitled, Tungsten Carbide-Based Coatings as Alternatives to Electrodeposited Hard Chromium

Development and Application of TiC-Ni-Based Plasma Sprayed Coatings

L.-M. Berger; M. Nebelung; P. Vuoristo; M. Heinonen; T. Mäntylä; T. Reinhardt; M. Delaet

ITSC 1999; 128-133https://doi.org/10.31399/asm.cp.itsc1999p0128

View Articletitled, Development and Application of TiC-Ni-Based Plasma Sprayed Coatings

An Experimental and Analytical Study of the Air Plasma Spraying of Tribaloy 800

P. Nylén; J. Wigren; M.O. Hansson; A.C. Leger

ITSC 1999; 134-140https://doi.org/10.31399/asm.cp.itsc1999p0134

View Articletitled, An Experimental and Analytical Study of the Air Plasma Spraying of Tribaloy 800

High Temperature Sliding Wear of Co-Based Plasma Sprayed Coatings for Aeronautical Applications

S. Economou; D. Grimanelis; E. Georgiopoulos; C. Stournaras; M. Vardavoulias

ITSC 1999; 141-146https://doi.org/10.31399/asm.cp.itsc1999p0141

View Articletitled, High Temperature Sliding Wear of Co-Based Plasma Sprayed Coatings for Aeronautical Applications

Untersuchungen zum Mineralgleitverschleiß von thermisch gespritzten Hartstoffschichten (Survey of Sliding Wear of Thermally Sprayed Hard-Coatings with Minerals)

A. Köhler; D. Adam; P. Männel; G. Stehr

ITSC 1999; 147-152https://doi.org/10.31399/asm.cp.itsc1999p0147

View Articletitled, Untersuchungen zum Mineralgleitverschleiß von thermisch gespritzten Hartstoffschichten (Survey of Sliding Wear of Thermally Sprayed Hard-Coatings with Minerals)

New Thermal Spray Coating Solutions for Sliding Wear Under Starved Lubrication

J.A. Peters; W. Straub; M. Dorfman; A.R. Nicoll

ITSC 1999; 153-157https://doi.org/10.31399/asm.cp.itsc1999p0153

View Articletitled, New Thermal Spray Coating Solutions for Sliding Wear Under Starved Lubrication

Hartstoffsynthese aus flüssigen Precursoren auf Siliziumbasis mittels DC-Plasmajet (Hard Material Coatings Synthesized of Silicon Based Liquid Precursors by DC-Plasmajet)

J. Wilden; A. Wank

ITSC 1999; 158-162https://doi.org/10.31399/asm.cp.itsc1999p0158

View Articletitled, Hartstoffsynthese aus flüssigen Precursoren auf Siliziumbasis mittels DC-Plasmajet (Hard Material Coatings Synthesized of Silicon Based Liquid Precursors by DC-Plasmajet)

Auswirkungen der Abscheidebedingungen auf das Kavitationsverhalten von Plasmajet-CVD-Diamantschichten (Effects of the Conditions of Diamond Synthesis on the Cavitation Behaviour of Plasma Jet CVD Diamond Coatings)

F. Deuerler; H. Gruner; M. Pohl; L. Tikana

ITSC 1999; 163-168https://doi.org/10.31399/asm.cp.itsc1999p0163

View Articletitled, Auswirkungen der Abscheidebedingungen auf das Kavitationsverhalten von Plasmajet-CVD-Diamantschichten (Effects of the Conditions of Diamond Synthesis on the Cavitation Behaviour of Plasma Jet CVD Diamond Coatings)

Einbindung und Nachweis von Polymeren in thermisch gespritzten Schichten (Implementation and Characterization of Polymers in Thermally Sprayed Coatings)

S. Hartmann; F. Bültmann; F. Janke

ITSC 1999; 169-173https://doi.org/10.31399/asm.cp.itsc1999p0169

View Articletitled, Einbindung und Nachweis von Polymeren in thermisch gespritzten Schichten (Implementation and Characterization of Polymers in Thermally Sprayed Coatings)

Thermal Spraying of Coatings Containing Solid Lubricants

A. Borisova; Y. Borisov; A. Tunik; L. Adeeva; E. Lugscheider; Chr. Herbst

ITSC 1999; 174-181https://doi.org/10.31399/asm.cp.itsc1999p0174

View Articletitled, Thermal Spraying of Coatings Containing Solid Lubricants

Process-Coating Relationship

Arc Spray Process Efficiency Analysis for Zinc and Aluminium Coatings

V. Belashchenko; R. Unger; A. Ivanov; J. Murdock; V. Sedov; E. Smith

ITSC 1999; 182-184https://doi.org/10.31399/asm.cp.itsc1999p0182

View Articletitled, Arc Spray Process Efficiency Analysis for Zinc and Aluminium Coatings

The Deposition Efficiency of Thermally Sprayed Nanopowders

S.M. Jaffe; E.J. Lavernia

ITSC 1999; 185-189https://doi.org/10.31399/asm.cp.itsc1999p0185

View Articletitled, The Deposition Efficiency of Thermally Sprayed Nanopowders

Spraying Characteristics of Nanostructured Zirconia Particles

R.S. Lima; U. Senturk; C.C. Berndt; C.R.C. Lima

ITSC 1999; 190-195https://doi.org/10.31399/asm.cp.itsc1999p0190

View Articletitled, Spraying Characteristics of Nanostructured Zirconia Particles

Pre-treatment

Thermal Spray Deposition of Metallic and Ceramic Coating on Aluminium and Titanium Alloys using the PROTAL Process

F. Folio; G. Barbezat; C. Coddet; G. Montavon; S. Costil; O. Fréneaux

ITSC 1999; 196-201https://doi.org/10.31399/asm.cp.itsc1999p0196

View Articletitled, Thermal Spray Deposition of Metallic and Ceramic Coating on Aluminium and Titanium Alloys using the PROTAL Process

Investigation of Transferred-Arc Cleaning for Thin Film Removal

K. Hollis; R. Castro; B. Bartram

ITSC 1999; 202-207https://doi.org/10.31399/asm.cp.itsc1999p0202

View Articletitled, Investigation of Transferred-Arc Cleaning for Thin Film Removal

Adhesion Improvement of Plasma-Sprayed Ceramic Coatings on Steel Through Boronizing

V. Brožek; V. Dufek; K. Neufuss

ITSC 1999; 208-212https://doi.org/10.31399/asm.cp.itsc1999p0208

View Articletitled, Adhesion Improvement of Plasma-Sprayed Ceramic Coatings on Steel Through Boronizing

Post-treatment and Finishing

Improvement of Coating Characteristics and End-Use Performance of Thermal Sprayed Coatings Through Posttreatments Like Hardening, Nitriding or Carburizing

M.C. Nestler; H.-J. Spies; K. Herrmann

ITSC 1999; 213-218https://doi.org/10.31399/asm.cp.itsc1999p0213

View Articletitled, Improvement of Coating Characteristics and End-Use Performance of Thermal Sprayed Coatings Through Posttreatments Like Hardening, Nitriding or Carburizing

Residual Stresses in Plasma Sprayed Alumina and Chromia Coatings and Their Effect on Wear

S. Ahmaniemi; J. Knuuttila; T. Mäntylä

ITSC 1999; 219-222https://doi.org/10.31399/asm.cp.itsc1999p0219

View Articletitled, Residual Stresses in Plasma Sprayed Alumina and Chromia Coatings and Their Effect on Wear

Nachbehandlung thermisch gespritzter Schichten auf Magnesiumwerkstoffen (Post-Treatment of Coatings Plasma-Sprayed Onto Magnesium Alloys)

B. Wielage; K. Fleischer; R. Zenker; S. Schammer

ITSC 1999; 223-227https://doi.org/10.31399/asm.cp.itsc1999p0223

View Articletitled, Nachbehandlung thermisch gespritzter Schichten auf Magnesiumwerkstoffen (Post-Treatment of Coatings Plasma-Sprayed Onto Magnesium Alloys)

Microstructural Changes in YSZ Deposits During Annealing

A.J. Allen; G.G. Long; J. Wallace; J. Ilavsky; C.C. Berndt; H. Herman

ITSC 1999; 228-233https://doi.org/10.31399/asm.cp.itsc1999p0228

View Articletitled, Microstructural Changes in YSZ Deposits During Annealing

Nitriding of Titanium Plate and Atmospheric Plasma Sprayed Titanium Coating using Nitrogen Plasma Jets Under a Low Pressure Environment

Y. Andoh; S. Tobe; H. Tahara; T. Yoshikawa

ITSC 1999; 234-239https://doi.org/10.31399/asm.cp.itsc1999p0234

View Articletitled, Nitriding of Titanium Plate and Atmospheric Plasma Sprayed Titanium Coating using Nitrogen Plasma Jets Under a Low Pressure Environment

Processes and Equipment

Hochgeschwindigkeitslichtbogenspritzen (High Velocity Arc Spraying)

Fr.-W. Bach; Z. Babiak; T. Duda; G. Tegeder

ITSC 1999; 240-241https://doi.org/10.31399/asm.cp.itsc1999p0240

View Articletitled, Hochgeschwindigkeitslichtbogenspritzen (High Velocity Arc Spraying)

A Study and Comparison of Spray Stream Formation Using Two Wire Arc 90-Degree, and 0-Degree Spray Processes

R. Benary; J. Margolies; J. Gutleber

ITSC 1999; 242-246https://doi.org/10.31399/asm.cp.itsc1999p0242

View Articletitled, A Study and Comparison of Spray Stream Formation Using Two Wire Arc 90-Degree, and 0-Degree Spray Processes

Effects of Nozzle Fluid Dynamics on the Dynamic Characteristics of a Plasma Spray Torch

Z. Duan; J. Heberlein; S. Janisson; K. Wittmann; J.F. Coudert; P. Fauchais

ITSC 1999; 247-252https://doi.org/10.31399/asm.cp.itsc1999p0247

View Articletitled, Effects of Nozzle Fluid Dynamics on the Dynamic Characteristics of a Plasma Spray Torch

PTA Reclamation of Cast Iron and Nickel-Base Alloy Substrates with Films Deposited by Tape Casting

M. Leylavergne; T. Chartier; A. Grimaud; P. Fauchais

ITSC 1999; 253-258https://doi.org/10.31399/asm.cp.itsc1999p0253

View Articletitled, PTA Reclamation of Cast Iron and Nickel-Base Alloy Substrates with Films Deposited by Tape Casting

Möglichkeiten des reaktiven thermischen Spritzens von neuen Eisenbasislegierungen (Possibilities of Reactive Thermal Spraying of New Ferrous Alloys)

O.C. Brandt; S. Siegmann

ITSC 1999; 259-264https://doi.org/10.31399/asm.cp.itsc1999p0259

View Articletitled, Möglichkeiten des reaktiven thermischen Spritzens von neuen Eisenbasislegierungen (Possibilities of Reactive Thermal Spraying of New Ferrous Alloys)

Fabrication of Ti-Nitrides by Reactive Plasma Spray

M. Suzuki; S. Sodeoka; T. Inoue; K. Ueno; T. Valente

ITSC 1999; 265-270https://doi.org/10.31399/asm.cp.itsc1999p0265

View Articletitled, Fabrication of Ti-Nitrides by Reactive Plasma Spray

New Processes

Triplex - A High Performance Plasma Torch

G. Barbezat; J. Zierhut; K.D. Landes

ITSC 1999; 271-274https://doi.org/10.31399/asm.cp.itsc1999p0271

View Articletitled, Triplex - A High Performance Plasma Torch

The Development of a Low to Medium Power Atmospheric Mobile Plasma System

M. Zwetsloot; P. Mor; R. Prince

ITSC 1999; 275-277https://doi.org/10.31399/asm.cp.itsc1999p0275

View Articletitled, The Development of a Low to Medium Power Atmospheric Mobile Plasma System

Thermal Sprayed Thin Coatings Produced by LPPS (Low Pressure Plasma Spraying)

M. Loch; G. Barbezat

ITSC 1999; 278-281https://doi.org/10.31399/asm.cp.itsc1999p0278

View Articletitled, Thermal Sprayed Thin Coatings Produced by LPPS (Low Pressure Plasma Spraying)

The High Frequency Pulse Detonation (HFPD) Spray Process

I. Fagoaga; G. Barykin; J. de Juan; T. Soroa; C. Vaquero

ITSC 1999; 282-287https://doi.org/10.31399/asm.cp.itsc1999p0282

View Articletitled, The High Frequency Pulse Detonation (HFPD) Spray Process

Spraying the Current Conducting Coatings on Electrotechnical Unit by the CGS Method

A.N. Papyrin; A.P. Alkimov; V.F. Kosarev

ITSC 1999; 288-290https://doi.org/10.31399/asm.cp.itsc1999p0288

View Articletitled, Spraying the Current Conducting Coatings on Electrotechnical Unit by the CGS Method

Thermal Coating Technology in Controlled Atmospheres (ChamPro)

P. Ambuhl; P. Meyer

ITSC 1999; 291-292https://doi.org/10.31399/asm.cp.itsc1999p0291

View Articletitled, Thermal Coating Technology in Controlled Atmospheres (ChamPro)

Materials and Powders

Plasma Coating from the Synthesized Composite Powders

P. Vityaz; A. Belyaev; T. Talako; V. Koval

ITSC 1999; 293-295https://doi.org/10.31399/asm.cp.itsc1999p0293

View Articletitled, Plasma Coating from the Synthesized Composite Powders

High Temperature Corrosion Resistance of Newly Developed Cr-Based Alloy Coatings

S. Tobe; Y. Andoh; K. Hidaka; K. Tanaka; S. Nishimura; K. Kawaharada; K. Shirai

ITSC 1999; 296-300https://doi.org/10.31399/asm.cp.itsc1999p0296

View Articletitled, High Temperature Corrosion Resistance of Newly Developed Cr-Based Alloy Coatings

Thermal Spraying of Titanium Carbide Composite Materials

B. Wielage; S. Steinhäuser; T. Schnick; U. Hofmann; A. Ilyuschenko; T. Azarova

ITSC 1999; 301-305https://doi.org/10.31399/asm.cp.itsc1999p0301

View Articletitled, Thermal Spraying of Titanium Carbide Composite Materials

On-line Diagnostics

Long-Term Stability of Plasma Spraying: Study on the Evolution of the In-Flight Particle State, Coating Microstructure, Voltage and Acoustic Signatures

L. Leblanc; C. Moreau; P. Gougeon; J. Xi

ITSC 1999; 306-311https://doi.org/10.31399/asm.cp.itsc1999p0306

View Articletitled, Long-Term Stability of Plasma Spraying: Study on the Evolution of the In-Flight Particle State, Coating Microstructure, Voltage and Acoustic Signatures

On-Line Process Monitoring During Spraying of TTBCs by Acoustic Emission Analyses

E. Lugscheider; F. Ladru; H.-A. Crostack; G. Reuss; T. Haubold

ITSC 1999; 312-317https://doi.org/10.31399/asm.cp.itsc1999p0312

View Articletitled, On-Line Process Monitoring During Spraying of TTBCs by Acoustic Emission Analyses

In-Situ Temperature Control of Coating and Workpiece in Thermal Spraying

P. Jokinen; T. Varis; K. Korpiola; T. Kauppinen

ITSC 1999; 318-320https://doi.org/10.31399/asm.cp.itsc1999p0318

View Articletitled, In-Situ Temperature Control of Coating and Workpiece in Thermal Spraying

On-Iine-Prozeßüberwachung mittels Schallemission beim Beschichten von Walzen (On-Line Control by Acoustic Emission During Coating of Rolls)

H.-A. Crostack; G. Reuss; U. Beller

ITSC 1999; 321-324https://doi.org/10.31399/asm.cp.itsc1999p0321

View Articletitled, On-Iine-Prozeßüberwachung mittels Schallemission beim Beschichten von Walzen (On-Line Control by Acoustic Emission During Coating of Rolls)

The Thin Layer Activation (TLA) Technique for the Solution of Wear Problems in Coating Industry

O. Lacroix; S. Bertini; A. Scrivani; T. Sauvage; U. Bardi

ITSC 1999; 325-328https://doi.org/10.31399/asm.cp.itsc1999p0325

View Articletitled, The Thin Layer Activation (TLA) Technique for the Solution of Wear Problems in Coating Industry

Characterization of Plasma Spray Processes by Monitoring the State of the Sprayed Particles

L. Leblanc; C. Moreau; J.-G. Legoux; B. Arsenault

ITSC 1999; 329-334https://doi.org/10.31399/asm.cp.itsc1999p0329

View Articletitled, Characterization of Plasma Spray Processes by Monitoring the State of the Sprayed Particles

Control of Jet Convergence in Wire Arc Spray Systems

N. Hussary; J. Schein; J. Heberlein

ITSC 1999; 335-339https://doi.org/10.31399/asm.cp.itsc1999p0335

View Articletitled, Control of Jet Convergence in Wire Arc Spray Systems

In-Situ-Diagnostik bei Verfahren des thermischen Beschichtens – Particle Flux Imaging (PFI) (In-Situ Diagnostic Related to the Process of Thermal Coating – Particle Flux Imaging (PFI))

J. Zierhut; K. Landes; C. Waas; D. Kutscher; P. Heinrich; W. Krömmer

ITSC 1999; 340-344https://doi.org/10.31399/asm.cp.itsc1999p0340

View Articletitled, In-Situ-Diagnostik bei Verfahren des thermischen Beschichtens – Particle Flux Imaging (PFI) (In-Situ Diagnostic Related to the Process of Thermal Coating – Particle Flux Imaging (PFI))

Characterization Methods

Zerstörungsfreie Prüfung von thermisch gespritzten Schichten durch Puls-Thermographie (Non-Destructive Testing of Thermal Sprayed Coatings by Pulsed Infrared Technique)

M. Dvorak; A. Rupp; C. Florin

ITSC 1999; 345-349https://doi.org/10.31399/asm.cp.itsc1999p0345

View Articletitled, Zerstörungsfreie Prüfung von thermisch gespritzten Schichten durch Puls-Thermographie (Non-Destructive Testing of Thermal Sprayed Coatings by Pulsed Infrared Technique)

Scratch Testing of Ceramic Plasma-Sprayed Coatings

L.C. Erickson; H.M. Hawthorne; T. Troczynski

ITSC 1999; 350-354https://doi.org/10.31399/asm.cp.itsc1999p0350

View Articletitled, Scratch Testing of Ceramic Plasma-Sprayed Coatings

Surface Texture Correlations with Tensile Adhesive Strength of Thermally Sprayed Coatings Using Area-Scale Fractal Analysis

S. Siegmann; C.A. Brown

ITSC 1999; 355-360https://doi.org/10.31399/asm.cp.itsc1999p0355

View Articletitled, Surface Texture Correlations with Tensile Adhesive Strength of Thermally Sprayed Coatings Using Area-Scale Fractal Analysis

Schnellthermoanalyse von Spritzpulvern (Fast Thermal Analysis of Powders for Thermal Spraying)

Fr.-W. Bach; P. Stoll; T. Duda; C. Bruns

ITSC 1999; 361-364https://doi.org/10.31399/asm.cp.itsc1999p0361

View Articletitled, Schnellthermoanalyse von Spritzpulvern (Fast Thermal Analysis of Powders for Thermal Spraying)

Vergleichende Untersuchungen zur Partikelgrößenanalyse von Spritzpulvern (Comparative Surveys for Analysing Particle Sizes)

H.-G. Suk; E. Lugscheider; R. Killing; H.-K. Lee

ITSC 1999; 365-369https://doi.org/10.31399/asm.cp.itsc1999p0365

View Articletitled, Vergleichende Untersuchungen zur Partikelgrößenanalyse von Spritzpulvern (Comparative Surveys for Analysing Particle Sizes)

Standardization

Wegweiser in die “GTS-qualifizierte Zukunft” (The Ways to the “GTS-Qualified Future”)

H.H. Höschele

ITSC 1999; 370-371https://doi.org/10.31399/asm.cp.itsc1999p0370

View Articletitled, Wegweiser in die “GTS-qualifizierte Zukunft” (The Ways to the “GTS-Qualified Future”)

Qualitätssicherung in deutschen Spritzbetrieben – Erfahrungen aus Sicht eines Auditors und eines Spritzbetriebes (Quality Assurance in German Thermal Spray Shops – Experiences from the Point of View of a Certifying Agency and a Thermal Spray Shop)

D. Böhme; R. Huber; A. Ohliger; A.L. Schumacher

ITSC 1999; 372-377https://doi.org/10.31399/asm.cp.itsc1999p0372

View Articletitled, Qualitätssicherung in deutschen Spritzbetrieben – Erfahrungen aus Sicht eines Auditors und eines Spritzbetriebes (Quality Assurance in German Thermal Spray Shops – Experiences from the Point of View of a Certifying Agency and a Thermal Spray Shop)

Thermisch gespritzte Schichtdicken-Normale für eine Kalibrierstelle – Anforderungen und Realisierung (Thermally Sprayed Layer Thickness Standards for Calibration - Requirements and Implementation)

H.R. Bürki; S. Siegmann

ITSC 1999; 378-382https://doi.org/10.31399/asm.cp.itsc1999p0378

View Articletitled, Thermisch gespritzte Schichtdicken-Normale für eine Kalibrierstelle – Anforderungen und Realisierung (Thermally Sprayed Layer Thickness Standards for Calibration - Requirements and Implementation)

Characterisation of Plasma Sprayed Ceramic Coatings for Advanced Industrial Applications

T. Gutema; P. Bracali; R. Groppetti; S. Bertini; A. Scrivani

ITSC 1999; 383-388https://doi.org/10.31399/asm.cp.itsc1999p0383

View Articletitled, Characterisation of Plasma Sprayed Ceramic Coatings for Advanced Industrial Applications

Tensile Testing of HVOF-Sprayed Coatings

T. Varis; K. Korpiola; P. Jokinen; P. Auerkari

ITSC 1999; 389-391https://doi.org/10.31399/asm.cp.itsc1999p0389

View Articletitled, Tensile Testing of HVOF-Sprayed Coatings

Safety and Personnel Qualification

Sicherheitsaspekte im TS-Anlagenbau (Safety Aspects in Designing TS-Equipment)

K. Nassenstein; S. Kill

ITSC 1999; 392-396https://doi.org/10.31399/asm.cp.itsc1999p0392

View Articletitled, Sicherheitsaspekte im TS-Anlagenbau (Safety Aspects in Designing TS-Equipment)

Safe Working Practices with Thermal Spray Gases

G. Creffield; M. Cole

ITSC 1999; 397-401https://doi.org/10.31399/asm.cp.itsc1999p0397

View Articletitled, Safe Working Practices with Thermal Spray Gases

Schulung und Prüfung von spritztechnischem Personal nach europäischen Normen und Richtlinien (Education, Training and Qualification of Thermal Spraying Personnel According to European Standards and Guidelines)

D. Böhme; A. Ohliger

ITSC 1999; 402-409https://doi.org/10.31399/asm.cp.itsc1999p0402

View Articletitled, Schulung und Prüfung von spritztechnischem Personal nach europäischen Normen und Richtlinien (Education, Training and Qualification of Thermal Spraying Personnel According to European Standards and Guidelines)

Deposition Welding

Möglichkeiten zur Verbesserung der Verschleißeigenschaften von Aluminium-Legierungen durch Plasma-Pulver-Schweißverfahren (Possibilities for Improving Wear-Properties of Aluminium-Alloys by Plasma Powder Welding Process)

E. Lugscheider; G. Langer; K. Schlimbach; U. Dilthey; L. Kabatnik

ITSC 1999; 410-413https://doi.org/10.31399/asm.cp.itsc1999p0410

View Articletitled, Möglichkeiten zur Verbesserung der Verschleißeigenschaften von Aluminium-Legierungen durch Plasma-Pulver-Schweißverfahren (Possibilities for Improving Wear-Properties of Aluminium-Alloys by Plasma Powder Welding Process)

Rollennaht-Auftragschweißen – eine Alternative zum thermischen Spritzen hochbeanspruchter Oberflächen (Resistance Roller Seam Deposition Welding – An Alternative for Thermal Spraying of High Strained Surfaces)

G. Sitte; S. Keitel

ITSC 1999; 414-417https://doi.org/10.31399/asm.cp.itsc1999p0414

View Articletitled, Rollennaht-Auftragschweißen – eine Alternative zum thermischen Spritzen hochbeanspruchter Oberflächen (Resistance Roller Seam Deposition Welding – An Alternative for Thermal Spraying of High Strained Surfaces)

Approval for Laser Beam Cladding of Marine Engine Components

S. Bludszuweit; P. Liebke; J. Hoffmann; J. Schwarte; H. Kohn; E. Schubert; C. Theiler

ITSC 1999; 418-421https://doi.org/10.31399/asm.cp.itsc1999p0418

View Articletitled, Approval for Laser Beam Cladding of Marine Engine Components

High Velocity Oxy-Fuel Spraying

Slurry and Dry Erosion of Arc-Sprayed Metal and Composite Coatings

J.G. Legoux; B. Arsenault; J.P. Immarigeon; V.R. Parameswaran; H. Hawthorne

ITSC 1999; 422-427https://doi.org/10.31399/asm.cp.itsc1999p0422

View Articletitled, Slurry and Dry Erosion of Arc-Sprayed Metal and Composite Coatings

Influence of HVOF Process Parameters on Particle Parameters During Spraying of Metal Alloys

E. Lugscheider; Chr. Herbst; A. Fischer; L. Zhao

ITSC 1999; 428-433https://doi.org/10.31399/asm.cp.itsc1999p0428

View Articletitled, Influence of HVOF Process Parameters on Particle Parameters During Spraying of Metal Alloys

Investigation of HVOF Carbides as D-gun Coating Replacements in the Gas Turbine Industry

R. Radmard; S. Stoykewich; L. Russo

ITSC 1999; 434-438https://doi.org/10.31399/asm.cp.itsc1999p0434

View Articletitled, Investigation of HVOF Carbides as D-gun Coating Replacements in the Gas Turbine Industry

Study of the Decarburisation Reactions and Phase Transformations of a WC-Co Powder

L. Jacobs; M.M. Hyland; J. Gutleber; S. Sampath

ITSC 1999; 439-445https://doi.org/10.31399/asm.cp.itsc1999p0439

View Articletitled, Study of the Decarburisation Reactions and Phase Transformations of a WC-Co Powder

Spray Gun Influence on the Oxidation of TiC+Ni-Ti Based Powders During HVOF Spraying

J.M. Guilemany; J. Sánchez; J.M. de Paco

ITSC 1999; 446-451https://doi.org/10.31399/asm.cp.itsc1999p0446

View Articletitled, Spray Gun Influence on the Oxidation of TiC+Ni-Ti Based Powders During HVOF Spraying

Experimental Validation of a Curvilinear Nozzle Design for Improved DC Plasma Spraying

I. Thomson; V. Pershin; J. Mostaghimi; S. Chandra

ITSC 1999; 452-457https://doi.org/10.31399/asm.cp.itsc1999p0452

View Articletitled, Experimental Validation of a Curvilinear Nozzle Design for Improved DC Plasma Spraying

Corrosion Behavior in Seawater of WC-Co Coatings Obtained by HVOF and APS

C. Richard; G. Béranger; F. Merlier; D. Dalmas; J. Lu

ITSC 1999; 458-461https://doi.org/10.31399/asm.cp.itsc1999p0458

View Articletitled, Corrosion Behavior in Seawater of WC-Co Coatings Obtained by HVOF and APS

HVOF Coatings for Hard-Chrome Replacement – Properties and Applications

U. Erning; M.C. Nestler; G. Tauchert; T. Seitz; G. Prenzel

ITSC 1999; 462-467https://doi.org/10.31399/asm.cp.itsc1999p0462

View Articletitled, HVOF Coatings for Hard-Chrome Replacement – Properties and Applications

Fatigue Life of HVOF Tungsten Carbide Coated Aluminum and Hard Anodized Aluminum in Cyclic Bending and the Influence of Coating Residual Stresses

J.M. Wilson; J. Kim; J.R. Shadley; E.F. Rybicki; W.A. Emery; D.A. Somerville; J.D. Nuse; R.T.R. McGrann; D.J. Greving

ITSC 1999; 468-473https://doi.org/10.31399/asm.cp.itsc1999p0468

View Articletitled, Fatigue Life of HVOF Tungsten Carbide Coated Aluminum and Hard Anodized Aluminum in Cyclic Bending and the Influence of Coating Residual Stresses

Electrochemical Measurements and Characterisation of a Thermal Sprayed HVOF Cr₃C₂-NiCr Coating in a Corrosive Environment

J.M. Guilemany; J. Fernández; J. Delgado

ITSC 1999; 474-478https://doi.org/10.31399/asm.cp.itsc1999p0474

View Articletitled, Electrochemical Measurements and Characterisation of a Thermal Sprayed HVOF Cr<sub>3</sub>C<sub>2</sub>-NiCr Coating in a Corrosive Environment

Cyclic Deformation and Fatigue Damage of Aluminum Alloy and Steel HVOF Sprayed With WC-Co Coatings

A. Ibrahim; C.C. Berndt; U. Senturk

ITSC 1999; 479-482https://doi.org/10.31399/asm.cp.itsc1999p0479

View Articletitled, Cyclic Deformation and Fatigue Damage of Aluminum Alloy and Steel HVOF Sprayed With WC-Co Coatings

Praktische Erfahrungen mit dem Hochgeschwindigkeits-Flammspritzsystem Diamond Jet Hybrid in der Papierindustrie (Practical Experiences with the HVOF Diamond Jet Hybrid System In Paper Industry Applications)

H.-M. Höhle; S. Zimmermann; M. Gwosdz-Kaupmann

ITSC 1999; 483-486https://doi.org/10.31399/asm.cp.itsc1999p0483

View Articletitled, Praktische Erfahrungen mit dem Hochgeschwindigkeits-Flammspritzsystem Diamond Jet Hybrid in der Papierindustrie (Practical Experiences with the HVOF Diamond Jet Hybrid System In Paper Industry Applications)

Comparison of Erosion-Corrosion and Wear Resistance of HVOF Sprayed Coatings with Different Types of Carbides

T. Rogne; J. Berget; T. Solem

ITSC 1999; 487-492https://doi.org/10.31399/asm.cp.itsc1999p0487

View Articletitled, Comparison of Erosion-Corrosion and Wear Resistance of HVOF Sprayed Coatings with Different Types of Carbides

HVOF-gespritzte Schichten in Wasserkraftanlagen; Herstellung, Prüfung und Erfahrungen (HVOF-Sprayed Coatings for Hydroelectrics: Process, Testing And Experiences)

O.C. Brandt; S. Siegmann; R. Hitzek

ITSC 1999; 493-497https://doi.org/10.31399/asm.cp.itsc1999p0493

View Articletitled, HVOF-gespritzte Schichten in Wasserkraftanlagen; Herstellung, Prüfung und Erfahrungen (HVOF-Sprayed Coatings for Hydroelectrics: Process, Testing And Experiences)

HVOF-Sprayed Functionally Gradient Coating

P. Jokinen

ITSC 1999; 498-501https://doi.org/10.31399/asm.cp.itsc1999p0498

View Articletitled, HVOF-Sprayed Functionally Gradient Coating

Anisotropic Behaviour of the Structure-Properties Relationship in HVOF Self-Standing Forms

J.M. Guilemany; R. Franch; C. Lorenzana; J. Llibre

ITSC 1999; 502-506https://doi.org/10.31399/asm.cp.itsc1999p0502

View Articletitled, Anisotropic Behaviour of the Structure-Properties Relationship in HVOF Self-Standing Forms

Modeling and Simulation

Modeling, Simulating and Optimizing the Robotized Plasma Deposition: An Experimental Approach

D. Montillet; E. Dombre; P. Valentin; J.M. Goubot

ITSC 1999; 507-512https://doi.org/10.31399/asm.cp.itsc1999p0507

View Articletitled, Modeling, Simulating and Optimizing the Robotized Plasma Deposition: An Experimental Approach

Mathematical Modeling of Splat Formation at Off-Normal Angles in Thermal Spray

H. Fukanuma; C.-J. Li

ITSC 1999; 513-518https://doi.org/10.31399/asm.cp.itsc1999p0513

View Articletitled, Mathematical Modeling of Splat Formation at Off-Normal Angles in Thermal Spray

Simulation of the Thermal Spray Process and Off-Line Programming

R. Bonnet; R. Bolot; C. Coddet

ITSC 1999; 519-526https://doi.org/10.31399/asm.cp.itsc1999p0519

View Articletitled, Simulation of the Thermal Spray Process and Off-Line Programming

Optical Diagnostics of Heterogeneous Gas-Flame and Plasma Jets

Y.A. Chivel; E.A. Kostyukevich; L.Y. Min’ko; V.S. Ivashko; V.A. Okovityj; V.V. Kletsko

ITSC 1999; 527-529https://doi.org/10.31399/asm.cp.itsc1999p0527

View Articletitled, Optical Diagnostics of Heterogeneous Gas-Flame and Plasma Jets

A Mechanism of the Splashing During Droplet Splatting in Thermal Spraying

C.-J. Li; J.-L. Li; W.-B. Wang; A.-J. Fu; A. Ohmori

ITSC 1999; 530-535https://doi.org/10.31399/asm.cp.itsc1999p0530

View Articletitled, A Mechanism of the Splashing During Droplet Splatting in Thermal Spraying

Thermal Barrier Coatings

Duplex Thermal Barrier Coatings for Cryogenic High-Performance Rocket Combustion Chambers

J. VIcek; H. Huber; S. Beyer; F. Neuner; H. Voggenreiter

ITSC 1999; 536-541https://doi.org/10.31399/asm.cp.itsc1999p0536

View Articletitled, Duplex Thermal Barrier Coatings for Cryogenic High-Performance Rocket Combustion Chambers

Weiterentwickelte Gebrauchseigenschaften an Wärmedämmschichten (Enhanced Properties of Thermal Barrier Coatings)

T. Cosack; E. Bayer

ITSC 1999; 542-545https://doi.org/10.31399/asm.cp.itsc1999p0542

View Articletitled, Weiterentwickelte Gebrauchseigenschaften an Wärmedämmschichten (Enhanced Properties of Thermal Barrier Coatings)

Entwicklung und Reproduzierbarkeit von plasmagespritzten TBCs (Spraying and Improving Reproducible Plasma Sprayed Thermal Barrier Coatings)

W. Malléner; R. Vaßen; K.-H. Rauwald; B. Siebert; D. Stöver

ITSC 1999; 546-549https://doi.org/10.31399/asm.cp.itsc1999p0546

View Articletitled, Entwicklung und Reproduzierbarkeit von plasmagespritzten TBCs (Spraying and Improving Reproducible Plasma Sprayed Thermal Barrier Coatings)

Optimization of Thermal Barrier Coatings Sprayed by the PlazJet Plasma Gun

D. Sacriste; N. Goubot; J. Dhers; A. Vardelle

ITSC 1999; 550-555https://doi.org/10.31399/asm.cp.itsc1999p0550

View Articletitled, Optimization of Thermal Barrier Coatings Sprayed by the PlazJet Plasma Gun

Comparison of TBC Coatings Obtained by Conventional and High Velocity Plasma Spraying

N. Goubot; J. Dhers; M. Ducos

ITSC 1999; 556-560https://doi.org/10.31399/asm.cp.itsc1999p0556

View Articletitled, Comparison of TBC Coatings Obtained by Conventional and High Velocity Plasma Spraying

Comparison of Vacuum and Atmospheric Plasma Sprayed ZrO₂7Y₂O₃ Thermal Barrier Coatings

Fr.-W. Bach; Z. Babiak; W. Unterberg; T. Duda

ITSC 1999; 561-564https://doi.org/10.31399/asm.cp.itsc1999p0561

View Articletitled, Comparison of Vacuum and Atmospheric Plasma Sprayed ZrO<sub>2</sub>7Y<sub>2</sub>O<sub>3</sub> Thermal Barrier Coatings

Fracture Mechanism of Thick Thermal Barrier Coating

M. Takahashi; M. Saitoh; K. Takaishi; T. Kawasaki

ITSC 1999; 565-570https://doi.org/10.31399/asm.cp.itsc1999p0565

View Articletitled, Fracture Mechanism of Thick Thermal Barrier Coating

Thermal Fatigue Characteristics of the Membrane Formed by the Plasma Spraying of ZrO₂-NiCrAIY

K. Sonoya; C.-J. Li; S. Tobe

ITSC 1999; 571-576https://doi.org/10.31399/asm.cp.itsc1999p0571

View Articletitled, Thermal Fatigue Characteristics of the Membrane Formed by the Plasma Spraying of ZrO<sub>2</sub>-NiCrAIY

Thermal Spraying of Polymers

Structure and Barrier Properties of Nano-Reinforced Polymer Coatings

E. Petrovicova; R. Knight; T.E. Twardowski; L.S. Schadler

ITSC 1999; 577-581https://doi.org/10.31399/asm.cp.itsc1999p0577

View Articletitled, Structure and Barrier Properties of Nano-Reinforced Polymer Coatings

Flame Spraying of PEEK and PPS Polymers for Engineering Applications

E. Lugscheider; A. Fischer; Chr. Herbst

ITSC 1999; 582-587https://doi.org/10.31399/asm.cp.itsc1999p0582

View Articletitled, Flame Spraying of PEEK and PPS Polymers for Engineering Applications

Thermal Spraying of Metal-Polymeric Composite Coatings with an Increased Corrosion and Wear Resistance

Y. Borisov; I. Sviridova; V. Korzhyk

ITSC 1999; 588-591https://doi.org/10.31399/asm.cp.itsc1999p0588

View Articletitled, Thermal Spraying of Metal-Polymeric Composite Coatings with an Increased Corrosion and Wear Resistance

Induction Plasma Spraying

Diagnostics on a Thermal RF Plasma Process used for the Evaporation of Zirconia Powders

P. Buchner; H. Schubert; M. Weiß; K. Willée; J. Uhlenbusch

ITSC 1999; 592-597https://doi.org/10.31399/asm.cp.itsc1999p0592

View Articletitled, Diagnostics on a Thermal RF Plasma Process used for the Evaporation of Zirconia Powders

New Applications and New Product Qualities by RF Plasma Spraying

R. Henne; V. Borck; M. Müller; R. Ruckdäschel; G. Schiller

ITSC 1999; 598-602https://doi.org/10.31399/asm.cp.itsc1999p0598

View Articletitled, New Applications and New Product Qualities by RF Plasma Spraying

Microstructural Comparison of Alumina Coatings Prepared by RF and DC Plasma Spraying

H.C. Chen; E. Pfender; B. Dzur; G. Nutsch

ITSC 1999; 603-607https://doi.org/10.31399/asm.cp.itsc1999p0603

View Articletitled, Microstructural Comparison of Alumina Coatings Prepared by RF and DC Plasma Spraying

Comparison of DC and RF Plasma Sprayed Carbon Short Fibre Reinforced Aluminum Coatings

K. Fleischer; B. Wielage; M. Müller; R. Henne; V. Borck

ITSC 1999; 608-613https://doi.org/10.31399/asm.cp.itsc1999p0608

View Articletitled, Comparison of DC and RF Plasma Sprayed Carbon Short Fibre Reinforced Aluminum Coatings

Poster Session: Applications and Case Studies

Characterization of the Thermal Spray Coatings Having Amorphous and Nanocrystalline Structure

T. Shmyreva; A. Ivanov

ITSC 1999; 615-617https://doi.org/10.31399/asm.cp.itsc1999p0615

View Articletitled, Characterization of the Thermal Spray Coatings Having Amorphous and Nanocrystalline Structure

Simulation of Particle Flattening and Solidification Under Plasma Spraying

G. Gromyko; G. Zajats; S. Kundas; A. Ilyuschenko

ITSC 1999; 618-622https://doi.org/10.31399/asm.cp.itsc1999p0618

View Articletitled, Simulation of Particle Flattening and Solidification Under Plasma Spraying

Optimization of Plasma Spraying Modes for Hydroxyapatite Coatings

A. Ilyuschenko; V. Okovity; V. Ivashko; A. Shevtsov; S. Sobolevsky; A. Kulak; L. Lesnikovich; O. Kovaleva

ITSC 1999; 623-626https://doi.org/10.31399/asm.cp.itsc1999p0623

View Articletitled, Optimization of Plasma Spraying Modes for Hydroxyapatite Coatings

Development of Scuffing Phenomena in Detonation Sprayed Coatings

B. Antoszewski; T. Otmanianowski; W. Zórawski

ITSC 1999; 627-629https://doi.org/10.31399/asm.cp.itsc1999p0627

View Articletitled, Development of Scuffing Phenomena in Detonation Sprayed Coatings

Plasma Sprayed Ceramic Coatings for Ultrasonic Wave Guidance in Severe Environments

J. Voyer; B.R. Marple; C.-K. Jen

ITSC 1999; 630-635https://doi.org/10.31399/asm.cp.itsc1999p0630

View Articletitled, Plasma Sprayed Ceramic Coatings for Ultrasonic Wave Guidance in Severe Environments

Plasma Spraying of Silicates II

K. Neufuss; J. Ilavsky; J. Dubsky; B. Kolman; P. Chraska

ITSC 1999; 636-640https://doi.org/10.31399/asm.cp.itsc1999p0636

View Articletitled, Plasma Spraying of Silicates II

Plasma Sprayed Coating – Substrate Interface Study

J. Písacka; D. Laub; F. Buffat

ITSC 1999; 641-644https://doi.org/10.31399/asm.cp.itsc1999p0641

View Articletitled, Plasma Sprayed Coating – Substrate Interface Study

Characterisation of Bond Coatings Tested in Oxidising Environments

J.M. Guilemany; J.M. de Paco; S. Armada

ITSC 1999; 645-650https://doi.org/10.31399/asm.cp.itsc1999p0645

View Articletitled, Characterisation of Bond Coatings Tested in Oxidising Environments

Influence of Substrate Deformation on Formation of Splats During Thermal Spraying

V.V. Sobolev; J.M. Guilemany

ITSC 1999; 651-654https://doi.org/10.31399/asm.cp.itsc1999p0651

View Articletitled, Influence of Substrate Deformation on Formation of Splats During Thermal Spraying

Effect of Wetting and Surface Phenomena on Development of Coatings in Thermal Spraying

V.V. Sobolev; J.M. Guilemany

ITSC 1999; 655-658https://doi.org/10.31399/asm.cp.itsc1999p0655

View Articletitled, Effect of Wetting and Surface Phenomena on Development of Coatings in Thermal Spraying

Residual Stresses and Young’s Modulus of Alumina and Chromia Plasma Sprayed Deposits

J. Dubský; B. Kolman; M. Vyšohlíd

ITSC 1999; 659-663https://doi.org/10.31399/asm.cp.itsc1999p0659

View Articletitled, Residual Stresses and Young’s Modulus of Alumina and Chromia Plasma Sprayed Deposits

Manufacturing and Experimental Evaluation of Combined Ceramic Polymer Coating Systems for Tribological Application

D. Scherer; R. Gadow; A. Killinger

ITSC 1999; 664-669https://doi.org/10.31399/asm.cp.itsc1999p0664

View Articletitled, Manufacturing and Experimental Evaluation of Combined Ceramic Polymer Coating Systems for Tribological Application

Evaluation of Residual Stresses in Thermal Sprayed Coatings

K. Berreth; M. Buchmann; R. Gadow; J. Tabellion

ITSC 1999; 670-675https://doi.org/10.31399/asm.cp.itsc1999p0670

View Articletitled, Evaluation of Residual Stresses in Thermal Sprayed Coatings

Thermally Sprayed Multilayer Coatings as Electrodes and Dielectrics in High Efficiency Ozonizer Tubes

C. Friedrich; R. Gadow; A. Killinger

ITSC 1999; 676-682https://doi.org/10.31399/asm.cp.itsc1999p0676

View Articletitled, Thermally Sprayed Multilayer Coatings as Electrodes and Dielectrics in High Efficiency Ozonizer Tubes

Characterization and High Temperature Behaviour of Cr₂O₃-NiCr Plasma Sprayed Coatings

V.H. Hidalgo; F.J.B. Varela; S.P. Martínez

ITSC 1999; 683-686https://doi.org/10.31399/asm.cp.itsc1999p0683

View Articletitled, Characterization and High Temperature Behaviour of Cr<sub>2</sub>O<sub>3</sub>-NiCr Plasma Sprayed Coatings

Thermisch gespritzte Schichten auf der Magnesiumlegierung AZ 91 zur Verbesserung der Korrosions- und Verschleißeigenschaften (Thermal Sprayed Coatings on the Magnesium Alloy AZ 91 for Improvement of Corrosion and Wear Resistance)

A. Weisheit; U. Lenz; B.L. Mordike

ITSC 1999; 687-692https://doi.org/10.31399/asm.cp.itsc1999p0687

View Articletitled, Thermisch gespritzte Schichten auf der Magnesiumlegierung AZ 91 zur Verbesserung der Korrosions- und Verschleißeigenschaften (Thermal Sprayed Coatings on the Magnesium Alloy AZ 91 for Improvement of Corrosion and Wear Resistance)

Connection of the Thermical, Displacement and Strain Processes Under Dispersive Welding

L. Péter; L. Kiss

ITSC 1999; 693-698https://doi.org/10.31399/asm.cp.itsc1999p0693

View Articletitled, Connection of the Thermical, Displacement and Strain Processes Under Dispersive Welding

The Optimization of Plasma Sprayed Ni-50%Cr Coatings by Orthogonal Experimental Design

C.-J. Li; F.-H. Li; K. Sonoya

ITSC 1999; 699-704https://doi.org/10.31399/asm.cp.itsc1999p0699

View Articletitled, The Optimization of Plasma Sprayed Ni-50%Cr Coatings by Orthogonal Experimental Design

Stabflammspritzen von oxidkeramischen Werkstoffen (Rod Flame Spraying of Oxide Ceramic Materials)

P. Harmathy

ITSC 1999; 705-707https://doi.org/10.31399/asm.cp.itsc1999p0705

View Articletitled, Stabflammspritzen von oxidkeramischen Werkstoffen (Rod Flame Spraying of Oxide Ceramic Materials)

Poster Session: Post-treatment and Finishing

Increase of Wear Resistance of the Spraying Coatings by Means of Impulse-Plasma Processing

A. Ilyuschenko; V. Ivashko; V. Okovity; N. Tolochko; A. Shevtsov; K. Buykus

ITSC 1999; 708-710https://doi.org/10.31399/asm.cp.itsc1999p0708

View Articletitled, Increase of Wear Resistance of the Spraying Coatings by Means of Impulse-Plasma Processing

Versiegeln von thermisch gespritzten Schichten (Sealing of Thermally Sprayed Coats)

B. Wielage; U. Hofmann; S. Steinhäuser

ITSC 1999; 711-714https://doi.org/10.31399/asm.cp.itsc1999p0711

View Articletitled, Versiegeln von thermisch gespritzten Schichten (Sealing of Thermally Sprayed Coats)

Poster Session: Processes and Equipment

Electromagnetic Acceleration Plasma Spraying for Ceramic Coatings

H. Tahara; T. Shibata; Y. Andoh; T. Yasui; Y. Kagaya; T. Yoshikawa

ITSC 1999; 715-719https://doi.org/10.31399/asm.cp.itsc1999p0715

View Articletitled, Electromagnetic Acceleration Plasma Spraying for Ceramic Coatings

Plasma Characteristics of Supersonic Ammonia and Nitrogen/Hydrogen-Mixture Plasma Jets Under a Low Pressure Environment

H. Tahara; T. Shibata; Y. Andoh; T. Yasui; K. Onoe; T. Yoshikawa

ITSC 1999; 720-725https://doi.org/10.31399/asm.cp.itsc1999p0720

View Articletitled, Plasma Characteristics of Supersonic Ammonia and Nitrogen/Hydrogen-Mixture Plasma Jets Under a Low Pressure Environment

High Frequency Pulse Detonation (HFPD): Processing Parameters

I. Fagoaga; G. Barykin; J. de Juan; T. Soroa; C. Vaquero

ITSC 1999; 726-730https://doi.org/10.31399/asm.cp.itsc1999p0726

View Articletitled, High Frequency Pulse Detonation (HFPD): Processing Parameters

Laser Shock Processing of Al-SiC Composite Coatings

T. Schnick; U. Hofmann; S. Steinhäuser; B. Wielage; S. Tondu; P. Peyre; E. Bartnicki; L. Pawlowski

ITSC 1999; 731-735https://doi.org/10.31399/asm.cp.itsc1999p0731

View Articletitled, Laser Shock Processing of Al-SiC Composite Coatings

Poster Session: Materials and Powders

Nanostructured Hydroxyapatite Powders and Coatings

T. Shmyreva; E. Popov; A. Papyrin; E. Smith

ITSC 1999; 736-739https://doi.org/10.31399/asm.cp.itsc1999p0736

View Articletitled, Nanostructured Hydroxyapatite Powders and Coatings

Failure Analysis of Plasma Sprayed ZrO₂-CeO₂-Y₂O₃ Thermal Barrier Coatings

H.K. Kim; H.S. Choi; C.H. Lee

ITSC 1999; 740-746https://doi.org/10.31399/asm.cp.itsc1999p0740

View Articletitled, Failure Analysis of Plasma Sprayed ZrO<sub>2</sub>-CeO<sub>2</sub>-Y<sub>2</sub>O<sub>3</sub> Thermal Barrier Coatings

Poster Session: Quality Control and Assurance

Praktische Erfahrungen beim Einsatz eines Spektrometer-Meßsystems zur Prozeßüberwachung und -optimierung beim thermischen Spritzen (Experiences with the Application of a Spectroscopic Measurement System for Thermal Spray Process Control and Optimization)

B. Aumüller; A. Lang; K. Dotzler; H.W. Bergmann; K. Schutte

ITSC 1999; 747-749https://doi.org/10.31399/asm.cp.itsc1999p0747

View Articletitled, Praktische Erfahrungen beim Einsatz eines Spektrometer-Meßsystems zur Prozeßüberwachung und -optimierung beim thermischen Spritzen (Experiences with the Application of a Spectroscopic Measurement System for Thermal Spray Process Control and Optimization)

Prozeßdiagnostik an thermischen Beschichtungsverfahren – eine DFG-geförderte Forschungsgruppe stellt sich vor (Diagnostic Methods in Thermal Coating Processes – Presentation of a Project Group Funded by the DFG)

Fr.-W. Bach; R. Henne; K. Landes; E. Lugscheider

ITSC 1999; 750-755https://doi.org/10.31399/asm.cp.itsc1999p0750

View Articletitled, Prozeßdiagnostik an thermischen Beschichtungsverfahren – eine DFG-geförderte Forschungsgruppe stellt sich vor (Diagnostic Methods in Thermal Coating Processes – Presentation of a Project Group Funded by the DFG)

Poster Session: Safety and Personnel Qualification

Ausbildung zum Europäischen Thermischen Spritzer (ETS) mit modernen Lehrmethoden (Education and Training of the European Thermal Sprayer (ETS) by Advanced Training Methods)

D. Böhme; A. Ohliger; W. Mayr; H. Voggenreiter; B. Carlson; A. Choms; P. Palme; P. Heinrich; P. Möller; M. Nestler; A. Nicoll; Nuno; M. Oechsle; L. Oesterberg; K. Sullyvan; S. Zimmermann

ITSC 1999; 756https://doi.org/10.31399/asm.cp.itsc1999p0756

View Articletitled, Ausbildung zum Europäischen Thermischen Spritzer (ETS) mit modernen Lehrmethoden (Education and Training of the European Thermal Sprayer (ETS) by Advanced Training Methods)

Poster Session: Deposition Welding

Plasma-Pulver-Auftragschweißen unter erhöhtem Umgebungsdruck (Plasma Powder Welding under Raised Pressure Environment)

Fr.-W. Bach; P. Stoll; J. Zühlsdorf

ITSC 1999; 757-760https://doi.org/10.31399/asm.cp.itsc1999p0757

View Articletitled, Plasma-Pulver-Auftragschweißen unter erhöhtem Umgebungsdruck (Plasma Powder Welding under Raised Pressure Environment)

Poster Session: High Velocity Oxy-Fuel Spraying

Changes in Properties of Detonation Sprayed Coatings as a Function of Temperature

T. Babul

ITSC 1999; 761-764https://doi.org/10.31399/asm.cp.itsc1999p0761

View Articletitled, Changes in Properties of Detonation Sprayed Coatings as a Function of Temperature

Study and Characterisation of the W₂C-Phase Formation During the HVOF Spraying of WC+12%Co Powders

J.M. Guilemany; J.M. de Paco

ITSC 1999; 765-770https://doi.org/10.31399/asm.cp.itsc1999p0765

View Articletitled, Study and Characterisation of the W<sub>2</sub>C-Phase Formation During the HVOF Spraying of WC+12%Co Powders

Residual Stresses in HVOF-Sprayed Cr₃C₂/NiCr-Coatings

J.-J. Han; R. Knight; L.S. Schadler

ITSC 1999; 771-776https://doi.org/10.31399/asm.cp.itsc1999p0771

View Articletitled, Residual Stresses in HVOF-Sprayed Cr<sub>3</sub>C<sub>2</sub>/NiCr-Coatings

Poster Session: Modeling and Simulation

Integrated Simulation of Low Pressure Plasma Spraying Process

S. Kundas; V. Gurevich; A. Dostanko; A. Ilyuschenko; V. Ivashko; V. Okovity; E. Lugscheider; U. Eritt

ITSC 1999; 777-782https://doi.org/10.31399/asm.cp.itsc1999p0777

View Articletitled, Integrated Simulation of Low Pressure Plasma Spraying Process

Numerical Results of Off-Angle Thermal Spray Particle Impact

M. Bussmann; S. Chandra; J. Mostaghimi

ITSC 1999; 783-786https://doi.org/10.31399/asm.cp.itsc1999p0783

View Articletitled, Numerical Results of Off-Angle Thermal Spray Particle Impact

Numerically Calculated Thermal Stresses in Thermal Barrier Coatings on Cylindrical Substrates

G. Kerkhoff; R. Vaßen; D. Stöver

ITSC 1999; 787-792https://doi.org/10.31399/asm.cp.itsc1999p0787

View Articletitled, Numerically Calculated Thermal Stresses in Thermal Barrier Coatings on Cylindrical Substrates

Modeling of Simultaneous Plasma Spraying of Two Powders

B. Dussoubs; A. Vardelle; G. Mariaux; P. Fauchais; N.J. Themelis

ITSC 1999; 793-798https://doi.org/10.31399/asm.cp.itsc1999p0793

View Articletitled, Modeling of Simultaneous Plasma Spraying of Two Powders

Poster Session: Thermal Barrier Coatings

The Role of Feedstock Particle Size on the Microstructural Behavior of Plasma-Sprayed YSZ Deposits During Annealing

H. Boukari; A.J. Allen; G.G. Long; J. Wallace; J. Ilavsky; C.C. Berndt; H. Herman

ITSC 1999; 799-804https://doi.org/10.31399/asm.cp.itsc1999p0799

View Articletitled, The Role of Feedstock Particle Size on the Microstructural Behavior of Plasma-Sprayed YSZ Deposits During Annealing

Analysis of the Formation of Plasma Sprayed Thermal Barrier Coatings

V. Okovity; A. Ilyuschenko; T. Talako; N. Tolochko; V. Ivashko; S. Sobolevsky

ITSC 1999; 805-808https://doi.org/10.31399/asm.cp.itsc1999p0805

View Articletitled, Analysis of the Formation of Plasma Sprayed Thermal Barrier Coatings

Investigations of Thermal Barrier Coatings with Loading and Unloading to Various Stress Levels

C.K. Lin; U. Senturk; R. Lima; C.C. Berndt; J.C. Shieh; P.Y. Lee

ITSC 1999; 809-814https://doi.org/10.31399/asm.cp.itsc1999p0809

View Articletitled, Investigations of Thermal Barrier Coatings with Loading and Unloading to Various Stress Levels

Processing and Mechanical Properties of Plasma Sprayed Thermal Barrier Coatings

U. Senturk; R.S. Lima; C.C. Berndt; C.K. Lin; C.R.C. Lima

ITSC 1999; 815-819https://doi.org/10.31399/asm.cp.itsc1999p0815

View Articletitled, Processing and Mechanical Properties of Plasma Sprayed Thermal Barrier Coatings

Influence of Spray Angle on the Microstructure of YSZ and Alumina Plasma-Sprayed Deposits

J. Ilavsky; B. Kolman; K. Neufuss; P. Chraska

ITSC 1999; 820-824https://doi.org/10.31399/asm.cp.itsc1999p0820

View Articletitled, Influence of Spray Angle on the Microstructure of YSZ and Alumina Plasma-Sprayed Deposits

Factors Influencing the Surface Roughness of TBC Bond Coats

D. Zhangxiong; R. Knight

ITSC 1999; 825-829https://doi.org/10.31399/asm.cp.itsc1999p0825

View Articletitled, Factors Influencing the Surface Roughness of TBC Bond Coats

La₂Zr₂O₇ – A New Candidate for Thermal Barrier Coatings

R. Vaßen; X. Cao; F. Tietz; G. Kerkhoff; D. Stöver

ITSC 1999; 830-834https://doi.org/10.31399/asm.cp.itsc1999p0830

View Articletitled, La<sub>2</sub>Zr<sub>2</sub>O<sub>7</sub> – A New Candidate for Thermal Barrier Coatings

The Stiffness of Plasma Sprayed Zirconia Top Coats in TBCS

J.A. Thompson; T.W. Clyne

ITSC 1999; 835-840https://doi.org/10.31399/asm.cp.itsc1999p0835

View Articletitled, The Stiffness of Plasma Sprayed Zirconia Top Coats in TBCS

Poster Session: Thermal Spraying of Polymers

Plastic Coating Properties Obtained by Flame Spraying Process and Their Applications

V. Gourlaouen; R. Dominguez; F. Monerie-Moulin; M. Mendelsohn

ITSC 1999; 841-845https://doi.org/10.31399/asm.cp.itsc1999p0841

View Articletitled, Plastic Coating Properties Obtained by Flame Spraying Process and Their Applications

Variation in Molar Mass of Polymers During Thermal Spray Deposition

D.T. Gawne; Y. Bao; T. Zhang

ITSC 1999; 846-848https://doi.org/10.31399/asm.cp.itsc1999p0846

View Articletitled, Variation in Molar Mass of Polymers During Thermal Spray Deposition

Poster Session: Induction Plasma Spraying

Induction Thermal Plasma Deposition of Mo₅Si₃-B-Composites

X. Fan; T. Ishigaki

ITSC 1999; 849-852https://doi.org/10.31399/asm.cp.itsc1999p0849

View Articletitled, Induction Thermal Plasma Deposition of Mo<sub>5</sub>Si<sub>3</sub>-B-Composites

Conversion of Silanes Into SiC by RF Plasma Technology

E. Bouyer; M. Müller; G. Schiller; R. Henne

ITSC 1999; 853-858https://doi.org/10.31399/asm.cp.itsc1999p0853

View Articletitled, Conversion of Silanes Into SiC by RF Plasma Technology

Production of Porous Functional Coatings with Radio-Frequency Plasma Spraying

H. Thaler; V. Borck; R. Henne; G. Schiller

ITSC 1999; 859-863https://doi.org/10.31399/asm.cp.itsc1999p0859

View Articletitled, Production of Porous Functional Coatings with Radio-Frequency Plasma Spraying

Komponenten- und Verfahrensentwicklung beim DLR für das DC- und das HF-Plasmaspritzen (Components and process development of DC- and RF-plasma spraying at the German aerospace center DLR)

V. Borck; G. Schneider; R. Henne; G. Schiller; M. Fischer

ITSC 1999; 864-868https://doi.org/10.31399/asm.cp.itsc1999p0864

View Articletitled, Komponenten- und Verfahrensentwicklung beim DLR für das DC- und das HF-Plasmaspritzen (Components and process development of DC- and RF-plasma spraying at the German aerospace center DLR)

Volume Information

List of authors

ITSC 1999; 869-879https://doi.org/10.31399/asm.cp.itsc1999fm03

View Articletitled, List of authors

Organizing Committees

ITSC 1999; iihttps://doi.org/10.31399/asm.cp.itsc1999fm01

View Articletitled, Organizing Committees

Vorwort (Preface)

ITSC 1999; iiihttps://doi.org/10.31399/asm.cp.itsc1999fm02

View Articletitled, Vorwort (Preface)