Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 1997: Proceedings from the United Thermal Spray Conference

Industrial Application of Coatings

Thermal Spray Coating Developments for Piston Rings to be Used in Tomorrow’s Duty Engines

M. Delaet; C. Coddet

ITSC 1997; 1-9https://doi.org/10.31399/asm.cp.itsc1997p0001

View Articletitled, Thermal Spray Coating Developments for Piston Rings to be Used in Tomorrow’s Duty Engines

Internal Plasma Spray Process for Cylinder Bores in Automotive Industry

G. Barbezat; S. Keller; G. Wuest

ITSC 1997; 11-19https://doi.org/10.31399/asm.cp.itsc1997p0011

View Articletitled, Internal Plasma Spray Process for Cylinder Bores in Automotive Industry

Supersonic Induction Plasma Spraying of Dense YSZ Electrolyte Membranes

K. Mailhot; F. Gitzhofer; M.I. Boulos

ITSC 1997; 21-25https://doi.org/10.31399/asm.cp.itsc1997p0021

View Articletitled, Supersonic Induction Plasma Spraying of Dense YSZ Electrolyte Membranes

Plasma Spraying of Solid Oxide Fuel Cell Components

G. Schiller; M. Müller; R. Ruckdäschel; R. Henne; M. Lang

ITSC 1997; 27-34https://doi.org/10.31399/asm.cp.itsc1997p0027

View Articletitled, Plasma Spraying of Solid Oxide Fuel Cell Components

Thermal Spraying as a Forming Process of Thermoelectric Material

E. Lugseheider; G. Langer; C. Herbst; J. Schilz; E. Müller

ITSC 1997; 35-39https://doi.org/10.31399/asm.cp.itsc1997p0035

View Articletitled, Thermal Spraying as a Forming Process of Thermoelectric Material

Modeling of the Laser Engraving at Plasma Sprayed AI₂O₃, TiO₂ and AI₂TiO₅ Coatings for Anilox Rolls

M. Groc; L. Pawlowski; I. Smurov

ITSC 1997; 41-48https://doi.org/10.31399/asm.cp.itsc1997p0041

View Articletitled, Modeling of the Laser Engraving at Plasma Sprayed AI<sub>2</sub>O<sub>3</sub>, TiO<sub>2</sub> and AI<sub>2</sub>TiO<sub>5</sub> Coatings for Anilox Rolls

Plasma Spraying of Self-Lubricating Cr₂O₃-CaF₂ Coatings

F. Vos; L. Delaey; M. De Bonte; L. Froyen

ITSC 1997; 49-54https://doi.org/10.31399/asm.cp.itsc1997p0049

View Articletitled, Plasma Spraying of Self-Lubricating Cr<sub>2</sub>O<sub>3</sub>-CaF<sub>2</sub> Coatings

Thermal Shock Resistance of Plasma Sprayed Tungsten Coatings

M. Urquiaga Valdes; R.G. Saint-Jacques; C. Moreau

ITSC 1997; 55-57https://doi.org/10.31399/asm.cp.itsc1997p0055

View Articletitled, Thermal Shock Resistance of Plasma Sprayed Tungsten Coatings

Technology Transfer

G. Naisbitt; T. Alderton; C. Bruce

ITSC 1997; 59-63https://doi.org/10.31399/asm.cp.itsc1997p0059

View Articletitled, Technology Transfer

Hard and Erosion Wear Resistant Coatings

Erosion Resistance of Arc Sprayed Coatings to Iron Ore at 25°C and 330°C

S. Dallaire; H. Levert

ITSC 1997; 65-72https://doi.org/10.31399/asm.cp.itsc1997p0065

View Articletitled, Erosion Resistance of Arc Sprayed Coatings to Iron Ore at 25°C and 330°C

Performance of WC-Based, HVOF-Processed Coatings in Sliding Wear

B.R. Marple; B. Arsenault; J. Voyer

ITSC 1997; 73-81https://doi.org/10.31399/asm.cp.itsc1997p0073

View Articletitled, Performance of WC-Based, HVOF-Processed Coatings in Sliding Wear

Cavitation Resistance of Thermal Spray Coatings

A. Kumar; J. Boy; R. Zatorski; P. March

ITSC 1997; 83-90https://doi.org/10.31399/asm.cp.itsc1997p0083

View Articletitled, Cavitation Resistance of Thermal Spray Coatings

Abrasive Wear Characteristics of Ni-base Self-fluxing Alloy Spraywelding Overlays

Z. Ding; R. Knight; R.W. Smith

ITSC 1997; 91-95https://doi.org/10.31399/asm.cp.itsc1997p0091

View Articletitled, Abrasive Wear Characteristics of Ni-base Self-fluxing Alloy Spraywelding Overlays

Slurry Erosion of High Velocity Oxy-fuel Thermal Sprayed Coatings

B. Arsenault; J.-G. Legoux; H. Hawthorne

ITSC 1997; 97-106https://doi.org/10.31399/asm.cp.itsc1997p0097

View Articletitled, Slurry Erosion of High Velocity Oxy-fuel Thermal Sprayed Coatings

Slurry Erosion of Arc-Sprayed Metal and Composite Coatings

B. Arsenault; J.-G. Legoux; H. Hawthorne

ITSC 1997; 107-112https://doi.org/10.31399/asm.cp.itsc1997p0107

View Articletitled, Slurry Erosion of Arc-Sprayed Metal and Composite Coatings

Effect of Metallic Matrix Composition on the Erosion-Corrosion Behavior of WC-Coatings

T. Rogne; T. Solem; J. Berget

ITSC 1997; 113-119https://doi.org/10.31399/asm.cp.itsc1997p0113

View Articletitled, Effect of Metallic Matrix Composition on the Erosion-Corrosion Behavior of WC-Coatings

Tribological Behavior of Plasma-Sprayed Coating Layers in Cr₂O₃/TiO₂

J.M. Park; S.W. Lee; B.K. Kim

ITSC 1997; 121-126https://doi.org/10.31399/asm.cp.itsc1997p0121

View Articletitled, Tribological Behavior of Plasma-Sprayed Coating Layers in Cr<sub>2</sub>O<sub>3</sub>/TiO<sub>2</sub>

Low Friction Cobalt-Based Coatings for Titanium Alloys

K. Hajmrie; A.P. Chilkowich

ITSC 1997; 127-130https://doi.org/10.31399/asm.cp.itsc1997p0127

View Articletitled, Low Friction Cobalt-Based Coatings for Titanium Alloys

Composite Fe/TiC Powders for Wear Resistance Coatings Using Plasma Spray Process

P. Vitiaz; T. Azarova; T. Talako; A. Ilyuschenko; S. Steinhauser; B. Wielage; U. Gieland

ITSC 1997; 131-134https://doi.org/10.31399/asm.cp.itsc1997p0131

View Articletitled, Composite Fe/TiC Powders for Wear Resistance Coatings Using Plasma Spray Process

Friction and Wear Behavior of Thermally Sprayed Al-Cu-Fe Quasicrystal Coatings

S. De Palo; S. Usmani; S. Sampath; D.J. Sordelet; M. Besser

ITSC 1997; 135-139https://doi.org/10.31399/asm.cp.itsc1997p0135

View Articletitled, Friction and Wear Behavior of Thermally Sprayed Al-Cu-Fe Quasicrystal Coatings

Coatings for Infrastructure and Corrosion Applications

Characterization of Thermal-Sprayed Titanium Anodes for Cathodic Protection

G.R. Holcomb; S.D. Cramer; S.J. Bullard; B.S. Covino, Jr.; W.K. Collins; R.D. Govier; G.E. McGill

ITSC 1997; 141-150https://doi.org/10.31399/asm.cp.itsc1997p0141

View Articletitled, Characterization of Thermal-Sprayed Titanium Anodes for Cathodic Protection

Characterization of Electrochemically-Aged Thermal-Spray Titanium Anodes on Concrete

B.S. Covino, Jr.; G.R. Holcomb; S.D. Cramer; S.J. Bullard; W.K. Collins; G.E. McGill

ITSC 1997; 151-160https://doi.org/10.31399/asm.cp.itsc1997p0151

View Articletitled, Characterization of Electrochemically-Aged Thermal-Spray Titanium Anodes on Concrete

The Corrosion Behaviour of a Cermet Coating Applied by HVOF Spraying

A. Neville; T. Hodgkiess

ITSC 1997; 161-166https://doi.org/10.31399/asm.cp.itsc1997p0161

View Articletitled, The Corrosion Behaviour of a Cermet Coating Applied by HVOF Spraying

An Assessment of Galvanic Effects in Thermal Sprayed Coating Systems

T. Hodgkiess; A. Neville

ITSC 1997; 167-173https://doi.org/10.31399/asm.cp.itsc1997p0167

View Articletitled, An Assessment of Galvanic Effects in Thermal Sprayed Coating Systems

Tailored Solutions for Off-Shore Applications by Plazjet Sprayed Coatings

F. Ladru; E. Lugscheider; H. Jungklaus; C. Herbst; I. Kvernes

ITSC 1997; 175-181https://doi.org/10.31399/asm.cp.itsc1997p0175

View Articletitled, Tailored Solutions for Off-Shore Applications by Plazjet Sprayed Coatings

Thermally Sprayed Ternary Materials for Enhanced Corrosion Protection

T. Lester; S.J. Harris; D. Kingerley; S. Matthews

ITSC 1997; 183-189https://doi.org/10.31399/asm.cp.itsc1997p0183

View Articletitled, Thermally Sprayed Ternary Materials for Enhanced Corrosion Protection

Coating Protection Against Atmospheric Corrosion for Iron and Steel Structural Components: Status of Metallization in Japan

G. Ueno; Y.L. Nava

ITSC 1997; 191-197https://doi.org/10.31399/asm.cp.itsc1997p0191

View Articletitled, Coating Protection Against Atmospheric Corrosion for Iron and Steel Structural Components: Status of Metallization in Japan

New Fusible Alloys with Enhanced Corrosion Resistance

I. Kretschmer; P. Heimgartner; R. Polak; P.A. Kammer

ITSC 1997; 199-202https://doi.org/10.31399/asm.cp.itsc1997p0199

View Articletitled, New Fusible Alloys with Enhanced Corrosion Resistance

Corrosion Resistance of Thermal Sprayed Titanium Coating with Resin Seal in Chloride Solution

K. Ishikawa; T. Suzuki; Y. Kitamura; S. Tobe

ITSC 1997; 203-208https://doi.org/10.31399/asm.cp.itsc1997p0203

View Articletitled, Corrosion Resistance of Thermal Sprayed Titanium Coating with Resin Seal in Chloride Solution

Polymer-Based Thermal Spray Coatings

Effect of Thermal Spray Parameters on the Adhesion of Polymer-Based Coatings on Steel

Y. Bao; D.T. Gawne; T. Zhang

ITSC 1997; 209-213https://doi.org/10.31399/asm.cp.itsc1997p0209

View Articletitled, Effect of Thermal Spray Parameters on the Adhesion of Polymer-Based Coatings on Steel

Production of Recycled Polyethylene Terephthalate Coatings by HVOF and Plasma Spray

R.S. Lima; A.S. Takimi; M.D. Lima; C.P. Bergmann

ITSC 1997; 215-221https://doi.org/10.31399/asm.cp.itsc1997p0215

View Articletitled, Production of Recycled Polyethylene Terephthalate Coatings by HVOF and Plasma Spray

DC Plasma Polymer Composite Coatings for Abrasion Resistant Protective Surfaces

K.Y. Tufa; F. Gitzhofer

ITSC 1997; 223-229https://doi.org/10.31399/asm.cp.itsc1997p0223

View Articletitled, DC Plasma Polymer Composite Coatings for Abrasion Resistant Protective Surfaces

Flame Spraying of Polymers

D.J. Varacalle, Jr.; D.P. Zeek; K.W. Couch; D.M. Benson; S.M. Kirk

ITSC 1997; 231-238https://doi.org/10.31399/asm.cp.itsc1997p0231

View Articletitled, Flame Spraying of Polymers

Influence of a Filler Composition and Conditions of Flame Spraying on a Structure and Mechanical Properties of Composite Polymer Coatings

Yu. Borisov; V. Korzhik; I. Sviridova; A. Skorokhod

ITSC 1997; 239-242https://doi.org/10.31399/asm.cp.itsc1997p0239

View Articletitled, Influence of a Filler Composition and Conditions of Flame Spraying on a Structure and Mechanical Properties of Composite Polymer Coatings

Thermal Barrier Coatings

The Effect of Tungsten Contamination from the Spray Gun on the Performance of a Thermal Barrier Coating

J. Wigren; L. Pejryd; H. Karlsson

ITSC 1997; 243-249https://doi.org/10.31399/asm.cp.itsc1997p0243

View Articletitled, The Effect of Tungsten Contamination from the Spray Gun on the Performance of a Thermal Barrier Coating

The Effects of Silica Content and Thermal Cycles on Young’s Modulus and Residual Stresses in Yttria Stabilized Zirconia Thermal Barrier Coatings

R.T.R. McGrann; E.F. Rybicki; J.R. Shadley; R.E. Sanchez; W.J. Brindley

ITSC 1997; 251-257https://doi.org/10.31399/asm.cp.itsc1997p0251

View Articletitled, The Effects of Silica Content and Thermal Cycles on Young’s Modulus and Residual Stresses in Yttria Stabilized Zirconia Thermal Barrier Coatings

Plasma Spraying of Functionally Graded NiCrAIY/Yttria Stabilized Zirconia Coatings Using Pre-Alloyed Powders

K.A. Khor; Y.W. Gu

ITSC 1997; 259-266https://doi.org/10.31399/asm.cp.itsc1997p0259

View Articletitled, Plasma Spraying of Functionally Graded NiCrAIY/Yttria Stabilized Zirconia Coatings Using Pre-Alloyed Powders

On the Change in Stress State Associated with Bond Coat Oxidation during Heat Treatment of a Thermal Barrier Coating System

Y.C. Tsui; T.W. Clyne; R.C. Reed

ITSC 1997; 267-276https://doi.org/10.31399/asm.cp.itsc1997p0267

View Articletitled, On the Change in Stress State Associated with Bond Coat Oxidation during Heat Treatment of a Thermal Barrier Coating System

Properties of ZrO₂-7wt%Y₂O₃ Thermal Barrier Coatings in Relation to Plasma Spraying Conditions

C. Funke; B. Siebert; D. Stöver; R. Vaßen

ITSC 1997; 277-284https://doi.org/10.31399/asm.cp.itsc1997p0277

View Articletitled, Properties of ZrO<sub>2</sub>-7wt%Y<sub>2</sub>O<sub>3</sub> Thermal Barrier Coatings in Relation to Plasma Spraying Conditions

Processing and Thermal Cycling Effects on the Erosion Behavior of Thermal Barrier Coatings

J. Gutleber; S. Sampath; S. Usmani

ITSC 1997; 285-289https://doi.org/10.31399/asm.cp.itsc1997p0285

View Articletitled, Processing and Thermal Cycling Effects on the Erosion Behavior of Thermal Barrier Coatings

Assessment of Thermal Barrier Coatings by Plasma Deposition

K.S. Ravichandran; K. An; R. Taylor

ITSC 1997; 291-298https://doi.org/10.31399/asm.cp.itsc1997p0291

View Articletitled, Assessment of Thermal Barrier Coatings by Plasma Deposition

Field Evaluation of 2CaO-SiO₂-CaO-ZrO₂ Thermal Barrier Coating on Gas Turbine Vanes

N. Mifune; Y. Harada; H. Taira; S. Mishima

ITSC 1997; 299-303https://doi.org/10.31399/asm.cp.itsc1997p0299

View Articletitled, Field Evaluation of 2CaO-SiO<sub>2</sub>-CaO-ZrO<sub>2</sub> Thermal Barrier Coating on Gas Turbine Vanes

Highly Porous Thick Thermal Barrier Coatings Produced by Air Plasma Spraying of a Plastic-Ceramic Mixed Powder

G. Gualco; S. Corcoruto; A. Campora; R. Taylor; D. Schwingel; S. Oswald

ITSC 1997; 305-313https://doi.org/10.31399/asm.cp.itsc1997p0305

View Articletitled, Highly Porous Thick Thermal Barrier Coatings Produced by Air Plasma Spraying of a Plastic-Ceramic Mixed Powder

Microstructure Control of Zirconia Thermal Barrier Coatings by Using YAG Laser Combined Plasma Spraying Technique

Z. Zhou; N. Eguch; A. Ohmori

ITSC 1997; 315-321https://doi.org/10.31399/asm.cp.itsc1997p0315

View Articletitled, Microstructure Control of Zirconia Thermal Barrier Coatings by Using YAG Laser Combined Plasma Spraying Technique

Multi-Layered Thermal Barrier Coating for Land-Based Gas Turbines

M. Tamura; M. Takahashi; J. Ishii; K. Suzuki; M. Sato; K. Shimomura

ITSC 1997; 323-328https://doi.org/10.31399/asm.cp.itsc1997p0323

View Articletitled, Multi-Layered Thermal Barrier Coating for Land-Based Gas Turbines

Emerging Processing Systems

Thermal Spraying of Nanostructured Coatings by Hypersonic Plasma Particle Deposition

J. Heberlein; N.P. Rao; A. Neuman; J. Blum; N. Tymiak; P.H. McMurry; S.L. Girshick

ITSC 1997; 329-333https://doi.org/10.31399/asm.cp.itsc1997p0329

View Articletitled, Thermal Spraying of Nanostructured Coatings by Hypersonic Plasma Particle Deposition

The Influence of Injector Geometry and Carrier Gas Flow Rate on Spray Pattern

J.R. Fincke; W.D. Swank; D.C. Haggard

ITSC 1997; 335-342https://doi.org/10.31399/asm.cp.itsc1997p0335

View Articletitled, The Influence of Injector Geometry and Carrier Gas Flow Rate on Spray Pattern

Suspension Plasma Spraying (SPS) of Cobalt Spinel

G. Schiller; M. Müller; F. Gitzhofer; M.I. Boulos; R.B. Heimann

ITSC 1997; 343-347https://doi.org/10.31399/asm.cp.itsc1997p0343

View Articletitled, Suspension Plasma Spraying (SPS) of Cobalt Spinel

Suspension Plasma Spraying for the Preparation of Perovskite Powders and Coatings

G. Schiller; M. Müller; F. Gitzhofer

ITSC 1997; 349-352https://doi.org/10.31399/asm.cp.itsc1997p0349

View Articletitled, Suspension Plasma Spraying for the Preparation of Perovskite Powders and Coatings

Powder Processing by Suspension Plasma Spraying

E. Bouyer; F. Gitzhofer; M.I. Boulos

ITSC 1997; 353-359https://doi.org/10.31399/asm.cp.itsc1997p0353

View Articletitled, Powder Processing by Suspension Plasma Spraying

Deposition of Nickel-Aluminum Bronze Powder by Cold Gas-Dynamic Spray Method on 2618 AI for Developing Wear Resistant Coatings

R.B. Bhagat; M.F. Amateau; A. Papyrin; J.C. Conway, Jr.; B. Stutzman; B. Jones

ITSC 1997; 361-367https://doi.org/10.31399/asm.cp.itsc1997p0361

View Articletitled, Deposition of Nickel-Aluminum Bronze Powder by Cold Gas-Dynamic Spray Method on 2618 AI for Developing Wear Resistant Coatings

Process Combination Thermal Spraying/Nitriding—Wear, Corrosion Resistance, and Coating Structure

M.C. Nestler; H.-J. Spies; K. Herrmann

ITSC 1997; 369-375https://doi.org/10.31399/asm.cp.itsc1997p0369

View Articletitled, Process Combination Thermal Spraying/Nitriding—Wear, Corrosion Resistance, and Coating Structure

Arc Initiation for the Electromagnetic Powder Deposition Gun

R.L. Sledge; J.L. Bacon; D.G. Davis; R.J. Polizzi; J.R. Uglum; R.C. Zowarka

ITSC 1997; 377-383https://doi.org/10.31399/asm.cp.itsc1997p0377

View Articletitled, Arc Initiation for the Electromagnetic Powder Deposition Gun

Scaling Analysis of the Electromagnetic Powder Deposition (EPD) Gun

J.R. Uglum; J.L. Bacon; D.G. Davis; R.J. Polizzi; R.L. Sledge; R.C. Zowarka

ITSC 1997; 385-391https://doi.org/10.31399/asm.cp.itsc1997p0385

View Articletitled, Scaling Analysis of the Electromagnetic Powder Deposition (EPD) Gun

A New Electromagnetic Powder Deposition System

J.L. Bacon; D.G. Davis; R.J. Polizzi; R.L. Sledge; J.R. Uglum; R.C. Zowarka

ITSC 1997; 393-397https://doi.org/10.31399/asm.cp.itsc1997p0393

View Articletitled, A New Electromagnetic Powder Deposition System

The Diagnostic History of a New Electromagnetic Powder Deposition System

J.L. Bacon; D.G. Davis; R.L. Sledge; J.R. Uglum; R.C. Zowarka; R.J. Polizzi

ITSC 1997; 399-406https://doi.org/10.31399/asm.cp.itsc1997p0399

View Articletitled, The Diagnostic History of a New Electromagnetic Powder Deposition System

Arc Voltage Fluctuations as an Indication of Spray Torch Anode Condition

Z. Duan; L. Beall; M.P. Planche; J. Heberlein; E. Pfender; M. Stachowicz

ITSC 1997; 407-411https://doi.org/10.31399/asm.cp.itsc1997p0407

View Articletitled, Arc Voltage Fluctuations as an Indication of Spray Torch Anode Condition

Monitoring of Nozzle Wear during Plasma Spray

J. Xi; G. Krishnappa; C. Moreau

ITSC 1997; 413-418https://doi.org/10.31399/asm.cp.itsc1997p0413

View Articletitled, Monitoring of Nozzle Wear during Plasma Spray

Ceramic and Metallic Powder Spheroidization Using Induction Plasma Technology

N.M. Dignard; M.I. Boulos

ITSC 1997; 419-425https://doi.org/10.31399/asm.cp.itsc1997p0419

View Articletitled, Ceramic and Metallic Powder Spheroidization Using Induction Plasma Technology

New Developments in the Plasma Transferred Arc Process

R.J. DuMola; G.R. Heath

ITSC 1997; 427-434https://doi.org/10.31399/asm.cp.itsc1997p0427

View Articletitled, New Developments in the Plasma Transferred Arc Process

Automated Thermal Spray Technology for Rehabilitation and Maintenance of Civil Works Infrastructure

V.F. Hock; R. Senary; R. Ganertz; H. Herman

ITSC 1997; 435-444https://doi.org/10.31399/asm.cp.itsc1997p0435

View Articletitled, Automated Thermal Spray Technology for Rehabilitation and Maintenance of Civil Works Infrastructure

The Ultimate Spray Booth

L. Pejryd; J. Wigren; N. Hanner

ITSC 1997; 445-450https://doi.org/10.31399/asm.cp.itsc1997p0445

View Articletitled, The Ultimate Spray Booth

Processing Effects on Structure

The Influence of Gun Parameters on Co-Injected Particles in the Spraying of Metal-Ceramic Functionally Graded Materials

W.D. Swank; J.R. Fincke; D.C. Haggard; S. Sampath; W. Smith

ITSC 1997; 451-458https://doi.org/10.31399/asm.cp.itsc1997p0451

View Articletitled, The Influence of Gun Parameters on Co-Injected Particles in the Spraying of Metal-Ceramic Functionally Graded Materials

Comparison of Plasma-Sprayed Coatings Produced in Argon or Nitrogen Atmosphere

M. Leylavergne; A. Vardelle; B. Dussoubs; N. Goubot

ITSC 1997; 459-465https://doi.org/10.31399/asm.cp.itsc1997p0459

View Articletitled, Comparison of Plasma-Sprayed Coatings Produced in Argon or Nitrogen Atmosphere

The Effect of Substrate Temperature on the Adhesion of Plasma-Sprayed Borosilicate Glass Coatings

D.T. Gawne; Y. Bao; T. Zhang

ITSC 1997; 467-472https://doi.org/10.31399/asm.cp.itsc1997p0467

View Articletitled, The Effect of Substrate Temperature on the Adhesion of Plasma-Sprayed Borosilicate Glass Coatings

Phase Composition Changes in Annealed Plasma-Sprayed Zircon-Alumina Coatings

J. Dubsky; K. Neufuss; B. Kolman

ITSC 1997; 473-476https://doi.org/10.31399/asm.cp.itsc1997p0473

View Articletitled, Phase Composition Changes in Annealed Plasma-Sprayed Zircon-Alumina Coatings

Plasma Spraying of Silicates

P. Chráska; K. Neufuss; B. Kolman; J. Dubsky

ITSC 1997; 477-481https://doi.org/10.31399/asm.cp.itsc1997p0477

View Articletitled, Plasma Spraying of Silicates

The Gas Permeability of Plasma Sprayed Ceramic Coatings

A.C. Fox; T.W. Clyne

ITSC 1997; 483-490https://doi.org/10.31399/asm.cp.itsc1997p0483

View Articletitled, The Gas Permeability of Plasma Sprayed Ceramic Coatings

Increase in the Reliability of Thermal Sprayed Coatings

S. Steinhäuser; B. Wielage; U. Hofmann; G. Zimmermann

ITSC 1997; 491-497https://doi.org/10.31399/asm.cp.itsc1997p0491

View Articletitled, Increase in the Reliability of Thermal Sprayed Coatings

Post-Processing of Coatings

High Energy Beam Surface and Interface Modification of Thermally Sprayed Coatings

J. Wilden; M. Brune; Y. Kruzhanov; H.-D. Steffens

ITSC 1997; 499-505https://doi.org/10.31399/asm.cp.itsc1997p0499

View Articletitled, High Energy Beam Surface and Interface Modification of Thermally Sprayed Coatings

Laser Processing of Sprayed Powder and Compact Materials

P. Vityaz; V. Ivashko; A. Ilyuschenko

ITSC 1997; 507-510https://doi.org/10.31399/asm.cp.itsc1997p0507

View Articletitled, Laser Processing of Sprayed Powder and Compact Materials

High Performance Super-Austenitic Surface Alloy Using Plasma Coating and Laser Treatment

A.S. Khanna; K. Sridhar; M.B. Deshmukh

ITSC 1997; 511-518https://doi.org/10.31399/asm.cp.itsc1997p0511

View Articletitled, High Performance Super-Austenitic Surface Alloy Using Plasma Coating and Laser Treatment

The Effects of Post Heating an HVOF Sprayed Fusible Coating

L. Moskowitz

ITSC 1997; 519-525https://doi.org/10.31399/asm.cp.itsc1997p0519

View Articletitled, The Effects of Post Heating an HVOF Sprayed Fusible Coating

Diagnostic Measurements and Process Modeling

Inflight Behavior of Dissimilar Co-Injected Particles in the Spraying of Metal-Ceramic Functionally Graded Materials

J.R. Fincke; W.D. Swank; D.C. Haggard

ITSC 1997; 527-534https://doi.org/10.31399/asm.cp.itsc1997p0527

View Articletitled, Inflight Behavior of Dissimilar Co-Injected Particles in the Spraying of Metal-Ceramic Functionally Graded Materials

Influence of the Variation of Plasma Torch Parameters on Particle Melting and Solidification

M. Vardelle; P. Fauchais; A. Vardelle; A.C. Léger

ITSC 1997; 535-542https://doi.org/10.31399/asm.cp.itsc1997p0535

View Articletitled, Influence of the Variation of Plasma Torch Parameters on Particle Melting and Solidification

Vaporization and Ultra-Fine Particle Generation during the Plasma Spraying Process

K.A. Gross; P. Fauchais; M. Vardelle; J. Tikkanen; J. Keskinen

ITSC 1997; 543-548https://doi.org/10.31399/asm.cp.itsc1997p0543

View Articletitled, Vaporization and Ultra-Fine Particle Generation during the Plasma Spraying Process

Mathematical Modeling of a Free Plasma Jet Discharging into Air and Comparison with Probe Measurements

R. Bolot; M. Imbert; C. Coddet

ITSC 1997; 549-555https://doi.org/10.31399/asm.cp.itsc1997p0549

View Articletitled, Mathematical Modeling of a Free Plasma Jet Discharging into Air and Comparison with Probe Measurements

Computational Analysis of a Three-Dimensional Plasma Spray Jet

B. Dussoubs; P. Fauchais; A. Vardelle; M. Vardelle; N.J. Themelis

ITSC 1997; 557-565https://doi.org/10.31399/asm.cp.itsc1997p0557

View Articletitled, Computational Analysis of a Three-Dimensional Plasma Spray Jet

Investigation of the Long-Term Stability of Plasma Spraying by Monitoring Characteristics of the Sprayed Particles

L. Leblanc; P. Gougeon; C. Moreau

ITSC 1997; 567-575https://doi.org/10.31399/asm.cp.itsc1997p0567

View Articletitled, Investigation of the Long-Term Stability of Plasma Spraying by Monitoring Characteristics of the Sprayed Particles

In-Situ Measurement of Particle Concentration and Velocity Using a Non-lntensified CCD Camera

J. Knuuttila; P. Saarenrinne; R. Hernberg; T. Lehtinen; T. Mäntylä

ITSC 1997; 577-582https://doi.org/10.31399/asm.cp.itsc1997p0577

View Articletitled, In-Situ Measurement of Particle Concentration and Velocity Using a Non-lntensified CCD Camera

Robot Trajectory Generation and Coating Temperature Prediction of Plasma Sprayed Coatings

P. Nylén; M. Edberg

ITSC 1997; 583-592https://doi.org/10.31399/asm.cp.itsc1997p0583

View Articletitled, Robot Trajectory Generation and Coating Temperature Prediction of Plasma Sprayed Coatings

Measurement Technology for Inflight Particle Diagnosis in Plasma Spraying

M. Schütz; G. Barbezat

ITSC 1997; 593-597https://doi.org/10.31399/asm.cp.itsc1997p0593

View Articletitled, Measurement Technology for Inflight Particle Diagnosis in Plasma Spraying

Plasma Processing of Functionally Graded Materials Part I: Process Diagnostics

W.C. Smith; T.J. Jewett; S. Sampath; W.D. Swank; J.R. Fincke

ITSC 1997; 599-605https://doi.org/10.31399/asm.cp.itsc1997p0599

View Articletitled, Plasma Processing of Functionally Graded Materials Part I: Process Diagnostics

Plasma Processing of Functionally Graded Materials Part II: Deposit Formation

T.J. Jewett; W.C. Smith; H. Herman; J. Margolies; S. Sampath

ITSC 1997; 607-612https://doi.org/10.31399/asm.cp.itsc1997p0607

View Articletitled, Plasma Processing of Functionally Graded Materials Part II: Deposit Formation

Diagnostic Development for Control of Wire-Arc Spraying

J. Sheard; J. Heberlein; K. Stelson; E. Pfender

ITSC 1997; 613-618https://doi.org/10.31399/asm.cp.itsc1997p0613

View Articletitled, Diagnostic Development for Control of Wire-Arc Spraying

Modeling and Measurement of Splat Phenomenon

Simultaneous Independent Measurement of Splat Diameter and Cooling Time during Impact on a Substrate of Plasma Sprayed Molybdenum Particles

P. Gougeon; C. Moreau

ITSC 1997; 619-626https://doi.org/10.31399/asm.cp.itsc1997p0619

View Articletitled, Simultaneous Independent Measurement of Splat Diameter and Cooling Time during Impact on a Substrate of Plasma Sprayed Molybdenum Particles

Influence of the Spray Parameters on the Transient Pressure within a Molten Particle Impacting onto a Flat Substrate

G. Montavon; Z.G. Feng; C. Coddet; Z.Q. Feng; M. Domaszewski

ITSC 1997; 627-633https://doi.org/10.31399/asm.cp.itsc1997p0627

View Articletitled, Influence of the Spray Parameters on the Transient Pressure within a Molten Particle Impacting onto a Flat Substrate

Analysis of Nucleation, Phase Selection and Rapid Solidification of an Alumina Splat

A. Vardelle; C. Robert; G.X. Wang; S. Sampath

ITSC 1997; 635-643https://doi.org/10.31399/asm.cp.itsc1997p0635

View Articletitled, Analysis of Nucleation, Phase Selection and Rapid Solidification of an Alumina Splat

Dynamic Simulations of Multiple-Splat Spreading and Solidification

V. Prasad; H. Zhang; S. Sampath

ITSC 1997; 645-652https://doi.org/10.31399/asm.cp.itsc1997p0645

View Articletitled, Dynamic Simulations of Multiple-Splat Spreading and Solidification

Engineering Formulas for Flattening of Composite Powder Particles during Thermal Spraying

V.V. Sobolev; J.M. Guilemany; A.J. Martín

ITSC 1997; 653-656https://doi.org/10.31399/asm.cp.itsc1997p0653

View Articletitled, Engineering Formulas for Flattening of Composite Powder Particles during Thermal Spraying

Modeling and Experimental Studies of Particles Velocity and Temperature in Plasma Spraying Processes

A.Ph. Ilyuschenko; V.A. Okovity; S.P. Kundas; A.N. Kuz’menkov

ITSC 1997; 657-663https://doi.org/10.31399/asm.cp.itsc1997p0657

View Articletitled, Modeling and Experimental Studies of Particles Velocity and Temperature in Plasma Spraying Processes

Microstructural Characterization and Properties

Scale-Sensitive Fractal Analysis for Understanding the Influence of Substrate Roughness in Thermal Spraying

S.D. Siegmann; C.A. Brown

ITSC 1997; 665-670https://doi.org/10.31399/asm.cp.itsc1997p0665

View Articletitled, Scale-Sensitive Fractal Analysis for Understanding the Influence of Substrate Roughness in Thermal Spraying

Influence of Substrate and Coating Temperature on Columnar Growth within Plasma Sprayed Zirconia and Alumina Coatings

A. Haddadi; F. Nardou; P. Fauchais; A. Grimaud; A.C. Leger

ITSC 1997; 671-680https://doi.org/10.31399/asm.cp.itsc1997p0671

View Articletitled, Influence of Substrate and Coating Temperature on Columnar Growth within Plasma Sprayed Zirconia and Alumina Coatings

Microstructure and Abrasion Resistance of WC-Co Coatings Produced by High Velocity Oxy-Fuel Spraying

M.S.A. Khan; T.W. Clyne; A.J. Sturgeon

ITSC 1997; 681-690https://doi.org/10.31399/asm.cp.itsc1997p0681

View Articletitled, Microstructure and Abrasion Resistance of WC-Co Coatings Produced by High Velocity Oxy-Fuel Spraying

Phase Composition of Plasma-Sprayed Yttria Stabilized Zirconia

J. Ilavsky; J.K. Stalick

ITSC 1997; 691-695https://doi.org/10.31399/asm.cp.itsc1997p0691

View Articletitled, Phase Composition of Plasma-Sprayed Yttria Stabilized Zirconia

Changes in the Microstructure of Plasma-Sprayed Yttria-Stabilized Zirconia Deposits during Simulated Operating Conditions

J. Ilavsky; G.G. Long; A.J. Allen; C.C. Berndt; H. Herman

ITSC 1997; 697-702https://doi.org/10.31399/asm.cp.itsc1997p0697

View Articletitled, Changes in the Microstructure of Plasma-Sprayed Yttria-Stabilized Zirconia Deposits during Simulated Operating Conditions

Measurement of the Crystallinity of Hydroxyapatite Deposited by Plasma Spray

F. Rustichelli; B. Yang; N. Antolotti; S. Bertini; E. Girardin

ITSC 1997; 703-706https://doi.org/10.31399/asm.cp.itsc1997p0703

View Articletitled, Measurement of the Crystallinity of Hydroxyapatite Deposited by Plasma Spray

Influence of CaSi₂ and Si Additions on Properties of Coatings Produced by Plasma Spraying of Composite Powders

Yu. Borisov; A. Borisova; A. Tunik; M. Knyaz; V. Bobrik

ITSC 1997; 707-712https://doi.org/10.31399/asm.cp.itsc1997p0707

View Articletitled, Influence of CaSi<sub>2</sub> and Si Additions on Properties of Coatings Produced by Plasma Spraying of Composite Powders

Characterization of Cr₂O₃-TiO₂-CaF₂ Coatings Using Plasma Spray Process

A.Ph. Ilyuschenko; N.I. Shipica; P.A. Vityaz; A.A. Yerstak; A.Y. Beliaev

ITSC 1997; 713-716https://doi.org/10.31399/asm.cp.itsc1997p0713

View Articletitled, Characterization of Cr<sub>2</sub>O<sub>3</sub>-TiO<sub>2</sub>-CaF<sub>2</sub> Coatings Using Plasma Spray Process

Structural Characterization of Chromium Carbide-Nickel Chromium Coatings Obtained by HVOF-Spraying

J.M. Guilemany; J.A. Calero

ITSC 1997; 717-721https://doi.org/10.31399/asm.cp.itsc1997p0717

View Articletitled, Structural Characterization of Chromium Carbide-Nickel Chromium Coatings Obtained by HVOF-Spraying

Mechanical Properties of Coatings

Nanoindentation Study of Thermal Spray Deposits

S.H. Leigh; C.C. Berndt; M.K. Ferber; L. Riester

ITSC 1997; 723-729https://doi.org/10.31399/asm.cp.itsc1997p0723

View Articletitled, Nanoindentation Study of Thermal Spray Deposits

Fatigue Behavior and Deformation of Aluminum and Steel HVOF Sprayed with WC-Co Coatings

A. Ibrahim; C.C. Berndt

ITSC 1997; 731-736https://doi.org/10.31399/asm.cp.itsc1997p0731

View Articletitled, Fatigue Behavior and Deformation of Aluminum and Steel HVOF Sprayed with WC-Co Coatings

Fatigue Life in Bending and Coatings Residual Stress in Tungsten Carbide Thermal Spray Coatings

R.T.R. McGrann; J.R. Shadley; E.F. Rybicki; D.J. Graving; B.E. Badger; D.A. Somerville; W.A. Emery

ITSC 1997; 737-742https://doi.org/10.31399/asm.cp.itsc1997p0737

View Articletitled, Fatigue Life in Bending and Coatings Residual Stress in Tungsten Carbide Thermal Spray Coatings

Damage in Thermal-Sprayed WC-Co Coatings by Repeated Load

T. Tajiri; N. Sakoda; S. Yamamoto; S. Watanabe

ITSC 1997; 743-750https://doi.org/10.31399/asm.cp.itsc1997p0743

View Articletitled, Damage in Thermal-Sprayed WC-Co Coatings by Repeated Load

Impression Creep Behavior of Atmospheric Plasma-Sprayed and Hot Pressed MoSi₂/Si₃N₄

K.J. Hollis; D.P. Butt; R.G. Castro

ITSC 1997; 751-756https://doi.org/10.31399/asm.cp.itsc1997p0751

View Articletitled, Impression Creep Behavior of Atmospheric Plasma-Sprayed and Hot Pressed MoSi<sub>2</sub>/Si<sub>3</sub>N<sub>4</sub>

Elastic Modulus Measurements in Plasma Sprayed Deposits

J.S. Wallace; J. Ilavsky

ITSC 1997; 757-762https://doi.org/10.31399/asm.cp.itsc1997p0757

View Articletitled, Elastic Modulus Measurements in Plasma Sprayed Deposits

Influence of Surface Condition on the Bonding Strength of Thermal Sprayed Coatings

V.Yu. Ulianitsky; J.A. Nikolaev; T.P. Gavrilenko; M.C. Kim; J.W. Hong

ITSC 1997; 763-767https://doi.org/10.31399/asm.cp.itsc1997p0763

View Articletitled, Influence of Surface Condition on the Bonding Strength of Thermal Sprayed Coatings

Fracture Behavior and Tensile Adhesive Properties of HA Coatings

K.A. Khor; P. Cheang

ITSC 1997; 769-774https://doi.org/10.31399/asm.cp.itsc1997p0769

View Articletitled, Fracture Behavior and Tensile Adhesive Properties of HA Coatings

Study of Oxide Layers Obtained onto 304L Substrate Heated by a DC Plasma Jet

J. Pech; B. Hannoyer; L. Bianchi; P. Fauchais; A. Denoirjean

ITSC 1997; 775-782https://doi.org/10.31399/asm.cp.itsc1997p0775

View Articletitled, Study of Oxide Layers Obtained onto 304L Substrate Heated by a DC Plasma Jet

Influence of WC Particle Size and Matrix Composition on the Behavior of WC-Co-Cr Coatings Sprayed by the HVOF Process

J. Berget; E. Bardal; T. Rogne

ITSC 1997; 783-789https://doi.org/10.31399/asm.cp.itsc1997p0783

View Articletitled, Influence of WC Particle Size and Matrix Composition on the Behavior of WC-Co-Cr Coatings Sprayed by the HVOF Process

Effect of Powder Types on Mechanical Properties of D-Gun Coatings

M.C. Kim; S.B. Kim; J.W. Hong

ITSC 1997; 791-795https://doi.org/10.31399/asm.cp.itsc1997p0791

View Articletitled, Effect of Powder Types on Mechanical Properties of D-Gun Coatings

Analysis of Different Mechanisms of Coating-Substrate Adhesion in Thermal Spraying

V.V. Sobolev; J.M. Guilemany; J. Nutting

ITSC 1997; 797-804https://doi.org/10.31399/asm.cp.itsc1997p0797

View Articletitled, Analysis of Different Mechanisms of Coating-Substrate Adhesion in Thermal Spraying

Stress State Considerations of Coatings

Measurement of Stress Development during HVOF Thermal Spray

S. Kuroda; Y. Tashiro; H. Yumoto; S. Taira; H. Fukanuma

ITSC 1997; 805-811https://doi.org/10.31399/asm.cp.itsc1997p0805

View Articletitled, Measurement of Stress Development during HVOF Thermal Spray

An Analytical Model for the Generation of Residual Stresses in Sprayed Coatings Deposited Progressively onto Planar Substrates

Y.C. Tsui; T.W. Clyne

ITSC 1997; 813-822https://doi.org/10.31399/asm.cp.itsc1997p0813

View Articletitled, An Analytical Model for the Generation of Residual Stresses in Sprayed Coatings Deposited Progressively onto Planar Substrates

Influence of the Torch to Substrate Velocity and Resulting Temperature on the Residual Stresses in Alumina Plasma Sprayed Coatings

A.C. Leger; A. Grimaud; P. Fauchais; G. Delluc

ITSC 1997; 823-829https://doi.org/10.31399/asm.cp.itsc1997p0823

View Articletitled, Influence of the Torch to Substrate Velocity and Resulting Temperature on the Residual Stresses in Alumina Plasma Sprayed Coatings

In-Situ Measurements of Residual Stress within Coatings Plasma-Sprayed Under Industrial Conditions

L. Bianchi; F. Blein; N. Baradel; M. Jeandin

ITSC 1997; 831-838https://doi.org/10.31399/asm.cp.itsc1997p0831

View Articletitled, In-Situ Measurements of Residual Stress within Coatings Plasma-Sprayed Under Industrial Conditions

Residual Stress Analysis of Plasma Sprayed Thermal Barrier Coatings

V. Teixeira; M. Andritschky; W. Fischer; D. Stöver; H.P. Buchkremer

ITSC 1997; 839-845https://doi.org/10.31399/asm.cp.itsc1997p0839

View Articletitled, Residual Stress Analysis of Plasma Sprayed Thermal Barrier Coatings

Thermal Residual Stresses in Functionally Gradient Coatings

M. Andritschky; V. Teixeira; D. Stöver

ITSC 1997; 847-853https://doi.org/10.31399/asm.cp.itsc1997p0847

View Articletitled, Thermal Residual Stresses in Functionally Gradient Coatings

Residual Stress Measurement in Plasma Sprayed Coatings by X-Ray Diffraction

J. Matejicek; S. Sampath; J. Dubsky

ITSC 1997; 855-860https://doi.org/10.31399/asm.cp.itsc1997p0855

View Articletitled, Residual Stress Measurement in Plasma Sprayed Coatings by X-Ray Diffraction

Neutron Diffraction Residual Stress Measurement on Thermally Sprayed Coatings

J. Matejicek; S. Sampath; P.C. Brand; H.J. Prask

ITSC 1997; 861-866https://doi.org/10.31399/asm.cp.itsc1997p0861

View Articletitled, Neutron Diffraction Residual Stress Measurement on Thermally Sprayed Coatings

Methods of Determination and Control of Residual Stresses in Plasma Spray Coatings

L. Dekhtyar; A. Kleyman; V. Andreychuk; S. Berman

ITSC 1997; 867-873https://doi.org/10.31399/asm.cp.itsc1997p0867

View Articletitled, Methods of Determination and Control of Residual Stresses in Plasma Spray Coatings

High Velocity Processes

HVOF- and VPS-Coatings Using Nanostructured Iron-Based Alloys

O.C. Brandt; S. Siegmann; H.-P. Isch

ITSC 1997; 875-876https://doi.org/10.31399/asm.cp.itsc1997p0875

View Articletitled, HVOF- and VPS-Coatings Using Nanostructured Iron-Based Alloys

Structure and Properties of HVOF Sprayed Ceramic/Polymer Nanocomposite Coatings

E. Petrovicova; R. Knight; R.W. Smith; L.S. Schadler

ITSC 1997; 877-883https://doi.org/10.31399/asm.cp.itsc1997p0877

View Articletitled, Structure and Properties of HVOF Sprayed Ceramic/Polymer Nanocomposite Coatings

Oxidation in HVOF-Sprayed Steel

M.F. Smith; R.C. Dykhuizen; R.A. Neiser

ITSC 1997; 885-893https://doi.org/10.31399/asm.cp.itsc1997p0885

View Articletitled, Oxidation in HVOF-Sprayed Steel

HVOF-Sprayed Alloy In718 – The Influence of Process Parameters on the Microstructure and Mechanical Properties

H.F. Voggenreiter; H. Huber; H.-J. Spies; H. Baum

ITSC 1997; 895-900https://doi.org/10.31399/asm.cp.itsc1997p0895

View Articletitled, HVOF-Sprayed Alloy In718 – The Influence of Process Parameters on the Microstructure and Mechanical Properties

High Velocity Oxy-Fuel Thermal Sprayed Coatings as Alternates to WC-12Co Coatings and Chromium Plating

Z. Mutasim; V. Banker; C. Rimlinger

ITSC 1997; 901-908https://doi.org/10.31399/asm.cp.itsc1997p0901

View Articletitled, High Velocity Oxy-Fuel Thermal Sprayed Coatings as Alternates to WC-12Co Coatings and Chromium Plating

Sprayability and Properties of TiC-Ni Based Powders in the Detonation Gun and HVOF Processes

P. Vuoristo; T. Mäntylä; L.-M. Berger; M. Nebelung

ITSC 1997; 909-915https://doi.org/10.31399/asm.cp.itsc1997p0909

View Articletitled, Sprayability and Properties of TiC-Ni Based Powders in the Detonation Gun and HVOF Processes

The Structure and Properties of Two Fe-Cr-B-Based Coatings Sprayed Using HVOF

A.H. Dent; A.J. Horlock; D.G. McCartney; S.J. Harris

ITSC 1997; 917-923https://doi.org/10.31399/asm.cp.itsc1997p0917

View Articletitled, The Structure and Properties of Two Fe-Cr-B-Based Coatings Sprayed Using HVOF

WC-Co Detonation Coatings Having a Hybrid Amorphous-Nanocrystalline Structure Display Improved Properties

T. Shmyreva; V. Britun

ITSC 1997; 925-928https://doi.org/10.31399/asm.cp.itsc1997p0925

View Articletitled, WC-Co Detonation Coatings Having a Hybrid Amorphous-Nanocrystalline Structure Display Improved Properties

Thermal Spray Forming Using the HVOF Technique

J.M. Guilemany; J.R. Miguel; M.J. Dougan; J.M. de Paco; Z. Dong; J. Libre

ITSC 1997; 929-933https://doi.org/10.31399/asm.cp.itsc1997p0929

View Articletitled, Thermal Spray Forming Using the HVOF Technique

Structure-Property Relationships of TiC-Ni+Ti and (Ti,W) C-Ni Powders Manufactured by the SHS Process, and the Resultant HVOF-Sprayed Coatings

J.M. de Paco; J. Nutting; J.M. Guilemany; F.J. Sánchez; J.P. Miguel; P. Smith

ITSC 1997; 935-942https://doi.org/10.31399/asm.cp.itsc1997p0935

View Articletitled, Structure-Property Relationships of TiC-Ni+Ti and (Ti,W) C-Ni Powders Manufactured by the SHS Process, and the Resultant HVOF-Sprayed Coatings

Formation of Structure of HVOF Sprayed WC-Co Coating on a Copper Substrate

V.V. Sobolev; J.M. Guilemany; J.A. Calero

ITSC 1997; 943-948https://doi.org/10.31399/asm.cp.itsc1997p0943

View Articletitled, Formation of Structure of HVOF Sprayed WC-Co Coating on a Copper Substrate

Standardization

The Need for Standardization in Evaluating the Effect of Coatings on Substrate Mechanical Properties

J.P. Sauer

ITSC 1997; 949-953https://doi.org/10.31399/asm.cp.itsc1997p0949

View Articletitled, The Need for Standardization in Evaluating the Effect of Coatings on Substrate Mechanical Properties

The Use of Metallographic Standards in Calibration of the Polishing Process

J.P. Sauer

ITSC 1997; 955-957https://doi.org/10.31399/asm.cp.itsc1997p0955

View Articletitled, The Use of Metallographic Standards in Calibration of the Polishing Process

The Effect of Mounting Technique on the Microstructure of Thermal Barrier Coatings

J.P. Sauer; T. Leonhardt; A.R. Geary

ITSC 1997; 959-964https://doi.org/10.31399/asm.cp.itsc1997p0959

View Articletitled, The Effect of Mounting Technique on the Microstructure of Thermal Barrier Coatings

The Effects of Manual vs. Semi-Automatic Metallographic Specimen Preparation of Thermally Sprayed Coatings

G.A. Blann

ITSC 1997; 965-971https://doi.org/10.31399/asm.cp.itsc1997p0965

View Articletitled, The Effects of Manual vs. Semi-Automatic Metallographic Specimen Preparation of Thermally Sprayed Coatings

ISO 14000 Environmental Management System: A New Challenge for Coating Shops

K. Ebert; S. Roelleke; C.M. Verpoort

ITSC 1997; 973-979https://doi.org/10.31399/asm.cp.itsc1997p0973

View Articletitled, ISO 14000 Environmental Management System: A New Challenge for Coating Shops

Volume Information

Preface

ITSC 1997; iii-vihttps://doi.org/10.31399/asm.cp.itsc1997fm01

View Articletitled, Preface

Thermal Spray Hall of Fame

ITSC 1997; ixhttps://doi.org/10.31399/asm.cp.itsc1997fm03

View Articletitled, Thermal Spray Hall of Fame

Organizing Committee

ITSC 1997; viihttps://doi.org/10.31399/asm.cp.itsc1997fm02

View Articletitled, Organizing Committee