Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 1996: Proceedings from the National Thermal Spray Conference

Industrial Application of Coatings

Tungsten Coatings for Nuclear Fusion Devices

W. Malléner; W. Hohenauer; D. Stöver

ITSC 1996; 1-6https://doi.org/10.31399/asm.cp.itsc1996p0001

View Articletitled, Tungsten Coatings for Nuclear Fusion Devices

Vacuum Plasma Spray Forming of Tungsten Base Functionally Gradient Composites

M.R. Kim; R.W. Smith; D. Kapoor

ITSC 1996; 7-12https://doi.org/10.31399/asm.cp.itsc1996p0007

View Articletitled, Vacuum Plasma Spray Forming of Tungsten Base Functionally Gradient Composites

Thermal Spray Deposition and Evaluation of Low-Z Coatings

R.D. Seals; C.J. Swindeman; R.L. White

ITSC 1996; 13-19https://doi.org/10.31399/asm.cp.itsc1996p0013

View Articletitled, Thermal Spray Deposition and Evaluation of Low-Z Coatings

Development of Reliable Spray and Fuse Coatings for Boiler Protection

G.R. Heath; R. Polak; S. Gustafsson; T. Tsujita

ITSC 1996; 21-28https://doi.org/10.31399/asm.cp.itsc1996p0021

View Articletitled, Development of Reliable Spray and Fuse Coatings for Boiler Protection

The High Temperature Erosion/Corrosion Behavior of Industrial Thermally Sprayed Coatings

G.R. Heath; P.A. Kammer; M.M. Stack

ITSC 1996; 29-37https://doi.org/10.31399/asm.cp.itsc1996p0029

View Articletitled, The High Temperature Erosion/Corrosion Behavior of Industrial Thermally Sprayed Coatings

Thermal Spray Alternatives for Electroplated Chromium

G. Irons; W. Kratochvil; M. Schroeder; C. Brock

ITSC 1996; 39-47https://doi.org/10.31399/asm.cp.itsc1996p0039

View Articletitled, Thermal Spray Alternatives for Electroplated Chromium

A Study on Thermal Spray Coatings of Recuperators

B.G. Seong; S.Y. Hwang

ITSC 1996; 49-54https://doi.org/10.31399/asm.cp.itsc1996p0049

View Articletitled, A Study on Thermal Spray Coatings of Recuperators

Energy Absorption Capacity of Thermally Sprayed Aluminium Friction Damper

S. Ono; Japan K. Nakahira; S. Tsujioka; K. Inoue

ITSC 1996; 55-60https://doi.org/10.31399/asm.cp.itsc1996p0055

View Articletitled, Energy Absorption Capacity of Thermally Sprayed Aluminium Friction Damper

Applying Traction Coating to Steel Mill Rolls

V.C. Mayor

ITSC 1996; 61-64https://doi.org/10.31399/asm.cp.itsc1996p0061

View Articletitled, Applying Traction Coating to Steel Mill Rolls

Ultrasonic Application of Thick Metallic Coatings

J.-G. Legoux; C.-K. Jen

ITSC 1996; 65-72https://doi.org/10.31399/asm.cp.itsc1996p0065

View Articletitled, Ultrasonic Application of Thick Metallic Coatings

The Effect of Spraying Conditions on the Corrosion Resistance of Titanium Coatings for Surgical Implants

B. Normand; F. Renaud; C. Coddet; F. Tourenne

ITSC 1996; 73-78https://doi.org/10.31399/asm.cp.itsc1996p0073

View Articletitled, The Effect of Spraying Conditions on the Corrosion Resistance of Titanium Coatings for Surgical Implants

Hard and Erosion Resistant Coatings

Influence of Ceramic Content and Additives on the Abrasion Resistance of Arc Sprayed Stainless Steel-TiB₂ Coatings

S. Dallaire; H. Levert

ITSC 1996; 79-87https://doi.org/10.31399/asm.cp.itsc1996p0079

View Articletitled, Influence of Ceramic Content and Additives on the Abrasion Resistance of Arc Sprayed Stainless Steel-TiB<sub>2</sub> Coatings

Structure, Properties and Potentials of WC-CO, Cr₃C₂-NiCr and TiC-Ni-Based Hardmetal-like Coatings

L.-M. Berger; W. Hermel; P. Vuoristo; T. Mäntylä; W. Lengauer; P. Ettmayer

ITSC 1996; 89-96https://doi.org/10.31399/asm.cp.itsc1996p0089

View Articletitled, Structure, Properties and Potentials of WC-CO, Cr<sub>3</sub>C<sub>2</sub>-NiCr and TiC-Ni-Based Hardmetal-like Coatings

Microstructure and Properties of WC-CO-Cr Coatings

L.-M. Berger; P. Vuoristo; T. Mäntylä; W. Kunert; W. Lengauer; P. Ettmayer

ITSC 1996; 97-106https://doi.org/10.31399/asm.cp.itsc1996p0097

View Articletitled, Microstructure and Properties of WC-CO-Cr Coatings

Characterization of WC-Co Coatings Using HP/HVOF Process

S.Y. Hwang; B.G. Seong; M.C. Kim

ITSC 1996; 107-112https://doi.org/10.31399/asm.cp.itsc1996p0107

View Articletitled, Characterization of WC-Co Coatings Using HP/HVOF Process

Microstructure and Abrasion Resistance of Plasma Sprayed Cermet Coatings

M.S.A. Khan; T.W. Clyne

ITSC 1996; 113-122https://doi.org/10.31399/asm.cp.itsc1996p0113

View Articletitled, Microstructure and Abrasion Resistance of Plasma Sprayed Cermet Coatings

Characterization of Erosion Resistant Cr₃C₂-NiCr Plasma Sprayed Coatings

D.-Y. Kim; M.-S. Han; J.-G. Youn

ITSC 1996; 123-128https://doi.org/10.31399/asm.cp.itsc1996p0123

View Articletitled, Characterization of Erosion Resistant Cr<sub>3</sub>C<sub>2</sub>-NiCr Plasma Sprayed Coatings

The Utilization of Acetylene and Acetylene Based Gas Mixtures for the HVOF Coating of Chromium Oxide

M. Cole; G. Creffield

ITSC 1996; 129-133https://doi.org/10.31399/asm.cp.itsc1996p0129

View Articletitled, The Utilization of Acetylene and Acetylene Based Gas Mixtures for the HVOF Coating of Chromium Oxide

Improved High Temperature Iron Oxide Based Tribological Coatings

A. Kleyman; L. Kamo

ITSC 1996; 135-140https://doi.org/10.31399/asm.cp.itsc1996p0135

View Articletitled, Improved High Temperature Iron Oxide Based Tribological Coatings

Behavior of Some Tungsten Carbide Coatings in Molten Zinc

A.J. Stavros

ITSC 1996; 141-146https://doi.org/10.31399/asm.cp.itsc1996p0141

View Articletitled, Behavior of Some Tungsten Carbide Coatings in Molten Zinc

Chromium Carbide Coatings Produced with Various HVOF Spray Systems

S. Zimmermann; H. Kreye

ITSC 1996; 147-152https://doi.org/10.31399/asm.cp.itsc1996p0147

View Articletitled, Chromium Carbide Coatings Produced with Various HVOF Spray Systems

Cavitation Erosion of HVOF Coatings

R. Schwetzke; H. Kreye

ITSC 1996; 153-158https://doi.org/10.31399/asm.cp.itsc1996p0153

View Articletitled, Cavitation Erosion of HVOF Coatings

Chromium Carbide Coatings for High Temperature Erosion Resistance

D.R. Sielski; P. Sahoo

ITSC 1996; 159-167https://doi.org/10.31399/asm.cp.itsc1996p0159

View Articletitled, Chromium Carbide Coatings for High Temperature Erosion Resistance

Titanium Carbide in Wear Resistant Coatings

P. Vitiaz; A. Verstak; T. Azarova; T. Talako; E. Lugscheider

ITSC 1996; 169-176https://doi.org/10.31399/asm.cp.itsc1996p0169

View Articletitled, Titanium Carbide in Wear Resistant Coatings

Effect of HVOF Gas Velocity and Fuel to Oxygen Ratio on the Wear Properties of Tungsten Carbide Coating

K. Korpiola; P. Vuoristo

ITSC 1996; 177-184https://doi.org/10.31399/asm.cp.itsc1996p0177

View Articletitled, Effect of HVOF Gas Velocity and Fuel to Oxygen Ratio on the Wear Properties of Tungsten Carbide Coating

Coatings for Infrastructure

Electrochemical Aging of Thermal Sprayed Zinc Anodes on Concrete

G.R. Holcomb; S.J. Bullard; B.S. Covino, Jr; S.D. Cramer; C.B. Cryer; G.E. McGill

ITSC 1996; 185-192https://doi.org/10.31399/asm.cp.itsc1996p0185

View Articletitled, Electrochemical Aging of Thermal Sprayed Zinc Anodes on Concrete

Stainless Steel Coatings for Corrosion Protection of Steel Rebars

B. Arsenault; P. Gu; J.G. Legoux; B. Harvey; J. Fournier

ITSC 1996; 193-201https://doi.org/10.31399/asm.cp.itsc1996p0193

View Articletitled, Stainless Steel Coatings for Corrosion Protection of Steel Rebars

International and National Thermal Spray Standards Program with Comment on Those for the Corrosion Protection of Steel and Reinforced Concrete

R.A. Sulit

ITSC 1996; 203-205https://doi.org/10.31399/asm.cp.itsc1996p0203

View Articletitled, International and National Thermal Spray Standards Program with Comment on Those for the Corrosion Protection of Steel and Reinforced Concrete

The Importance of Corrosion on the Erosion-Corrosion Performance of Thermal Spray Ceramic-Metallic Coatings

T. Rogne; M. Bjordal; T. Solem; E. Bardai

ITSC 1996; 207-215https://doi.org/10.31399/asm.cp.itsc1996p0207

View Articletitled, The Importance of Corrosion on the Erosion-Corrosion Performance of Thermal Spray Ceramic-Metallic Coatings

Use of Combined Plasma Cleaning/Coating Process for the Cathodic Protection of Reinforced Concrete Structures

A. Finkelshteyn; A.L. Bimman

ITSC 1996; 217-220https://doi.org/10.31399/asm.cp.itsc1996p0217

View Articletitled, Use of Combined Plasma Cleaning/Coating Process for the Cathodic Protection of Reinforced Concrete Structures

Polymer-Based Thermal Spray Coatings

The Mechanical Properties of Combustion-Sprayed Polymers and Blends

J.A. Brogan; C.C. Berndt; A. Claudon; C. Coddet

ITSC 1996; 221-226https://doi.org/10.31399/asm.cp.itsc1996p0221

View Articletitled, The Mechanical Properties of Combustion-Sprayed Polymers and Blends

Effect of Processing Parameters on the Wear Resistance of Thermally Sprayed Epoxy Coatings

Y. Bao; D.T. Gawne

ITSC 1996; 227-230https://doi.org/10.31399/asm.cp.itsc1996p0227

View Articletitled, Effect of Processing Parameters on the Wear Resistance of Thermally Sprayed Epoxy Coatings

The Effect of Deposition Parameters on the Degradation of Plasma Sprayed Polymer Coatings

T. Zhang; D.T. Gawne; Y. Bao

ITSC 1996; 231-237https://doi.org/10.31399/asm.cp.itsc1996p0231

View Articletitled, The Effect of Deposition Parameters on the Degradation of Plasma Sprayed Polymer Coatings

Experimental Approach to Adhesion between an Alumina Plasma-Sprayed Coating and Polymeric Substrate

P. Lucchese; R. Jeandin; G. Surdon; A. Delavernme

ITSC 1996; 239-244https://doi.org/10.31399/asm.cp.itsc1996p0239

View Articletitled, Experimental Approach to Adhesion between an Alumina Plasma-Sprayed Coating and Polymeric Substrate

Applying Thermoplastic Powder by Flame Spraying on Various Types of Substrates

R. Dominguez; F. Monerie; A. Vardelle; P. Fauchais

ITSC 1996; 245-250https://doi.org/10.31399/asm.cp.itsc1996p0245

View Articletitled, Applying Thermoplastic Powder by Flame Spraying on Various Types of Substrates

Studies of the Flame Spraying of Polymers

D.J. Varacalle, Jr.; K.W. Couch; V.S. Budinger

ITSC 1996; 251-255https://doi.org/10.31399/asm.cp.itsc1996p0251

View Articletitled, Studies of the Flame Spraying of Polymers

Production of Heat and Corrosion-Resistant Plastic Coatings

R. Kawase; A. Nakano

ITSC 1996; 257-261https://doi.org/10.31399/asm.cp.itsc1996p0257

View Articletitled, Production of Heat and Corrosion-Resistant Plastic Coatings

Thermal Barrier Coatings

Analysis of Zirconia Powder for Thermal Spray: Reference Material for Particle Size Distribution Measurement

P. Pei; J. Kelly; S. Malghan; S. Dapkunas

ITSC 1996; 263-273https://doi.org/10.31399/asm.cp.itsc1996p0263

View Articletitled, Analysis of Zirconia Powder for Thermal Spray: Reference Material for Particle Size Distribution Measurement

Adhesion of Thermal Barrier Coating Systems and Incorporation of an Oxidation Barrier Layer

Y.C. Tsui; T.W. Clyne

ITSC 1996; 275-284https://doi.org/10.31399/asm.cp.itsc1996p0275

View Articletitled, Adhesion of Thermal Barrier Coating Systems and Incorporation of an Oxidation Barrier Layer

An Investigation of Particle Trajectories and Melting in an Air Plasma Sprayed Zirconia

R.A. Neiser; T.J. Roemer

ITSC 1996; 285-293https://doi.org/10.31399/asm.cp.itsc1996p0285

View Articletitled, An Investigation of Particle Trajectories and Melting in an Air Plasma Sprayed Zirconia

Thermal and Mechanical Properties of Plasma Sprayed ZrO₂-CeO₂-Y₂O₃ Coatings

S. Sodeoka; M. Suzuki; T. Inoue; K. Ueno; S. Oki; N. Kamisono

ITSC 1996; 295-302https://doi.org/10.31399/asm.cp.itsc1996p0295

View Articletitled, Thermal and Mechanical Properties of Plasma Sprayed ZrO<sub>2</sub>-CeO<sub>2</sub>-Y<sub>2</sub>O<sub>3</sub> Coatings

Acoustic Emission Studies of Thermal Barrier Coatings during Cyclic Four Point Bend Tests

J. Voyer; F. Gitzhofer; M.L. Boulos; J. Dionne

ITSC 1996; 303-310https://doi.org/10.31399/asm.cp.itsc1996p0303

View Articletitled, Acoustic Emission Studies of Thermal Barrier Coatings during Cyclic Four Point Bend Tests

Thermal Spraying of Composites

The Manufacture of SiC Fiber Reinforced ΑI₂O₃ Coatings by Plasma Spraying

H.-D. Steffens; M. Brune; E. Müller; R. Dittrich

ITSC 1996; 311-316https://doi.org/10.31399/asm.cp.itsc1996p0311

View Articletitled, The Manufacture of SiC Fiber Reinforced ΑI<sub>2</sub>O<sub>3</sub> Coatings by Plasma Spraying

Plasma Processing of Functionally Graded Materials: Diagnostics and Characterization

W. Smith; T.J. Jewett; S. Sampath; C.C. Berndt; H. Herman; J. Fincke; R.N. Wright

ITSC 1996; 317-324https://doi.org/10.31399/asm.cp.itsc1996p0317

View Articletitled, Plasma Processing of Functionally Graded Materials: Diagnostics and Characterization

Thermal Spraying of Silicon Nitride - Based Powders

S. Thiel; R.B. Heimann; M. Herrmann; L.-M. Berger; M. Nebelung; M. Zschunke; B. Wielage

ITSC 1996; 325-331https://doi.org/10.31399/asm.cp.itsc1996p0325

View Articletitled, Thermal Spraying of Silicon Nitride - Based Powders

Manufacture and Characterization of Particle Reinforced Aluminum Coatings

B. Wielage; M. Zschunke; A. Henker; S. Steinhäuser

ITSC 1996; 333-337https://doi.org/10.31399/asm.cp.itsc1996p0333

View Articletitled, Manufacture and Characterization of Particle Reinforced Aluminum Coatings

Al-SiC Metal Matrix Composite Coatings by Plasma Spraying

K. Ghosh; T. Troczynski; A.C.D. Chaklader

ITSC 1996; 339-347https://doi.org/10.31399/asm.cp.itsc1996p0339

View Articletitled, Al-SiC Metal Matrix Composite Coatings by Plasma Spraying

Investigations on Thermal Sprayed Carbon-Short-Fiber-Reinforced Aluminum Composites

B. Wielage; K. Fleisher; G. Zimmerman

ITSC 1996; 349-353https://doi.org/10.31399/asm.cp.itsc1996p0349

View Articletitled, Investigations on Thermal Sprayed Carbon-Short-Fiber-Reinforced Aluminum Composites

Self-Lubricating Composite Plasma Sprayed Coatings

D. Niebuhr; M. Scholl; P. Clayton

ITSC 1996; 355-361https://doi.org/10.31399/asm.cp.itsc1996p0355

View Articletitled, Self-Lubricating Composite Plasma Sprayed Coatings

Emerging Processing Systems

RF-Plasma Technology for Near Net-Shape Deposition

E. Fendler; M. Müller; R. Henne; F. Gitzhofer; M.L. Boulas

ITSC 1996; 363-368https://doi.org/10.31399/asm.cp.itsc1996p0363

View Articletitled, RF-Plasma Technology for Near Net-Shape Deposition

Properties of a Thermal Barrier Coating Fabricated by R.F. Plasma Spraying

F. Crabos; P. Monge-Cadet; P. Lucchese; F. Blein; E. Rigal

ITSC 1996; 369-373https://doi.org/10.31399/asm.cp.itsc1996p0369

View Articletitled, Properties of a Thermal Barrier Coating Fabricated by R.F. Plasma Spraying

RF-Plasma Technology to Enhance Spray Materials

G. Paskalov

ITSC 1996; 375-378https://doi.org/10.31399/asm.cp.itsc1996p0375

View Articletitled, RF-Plasma Technology to Enhance Spray Materials

Phase Formation during In-Flight Treatment of MoSi₂ Powders in an R.F. Induction Plasma

X. Fan; T. Ishigaki

ITSC 1996; 379-385https://doi.org/10.31399/asm.cp.itsc1996p0379

View Articletitled, Phase Formation during In-Flight Treatment of MoSi<sub>2</sub> Powders in an R.F. Induction Plasma

The 5S Thermal Spray Systems

J.A. Browning

ITSC 1996; 387-390https://doi.org/10.31399/asm.cp.itsc1996p0387

View Articletitled, The 5S Thermal Spray Systems

The Characteristics of Diamond Film Deposited by Magnet-Enhanced Plasma Jet CVD

K. Zhou; M. Dair; D. Wang; P. Han; B. Feng

ITSC 1996; 391-395https://doi.org/10.31399/asm.cp.itsc1996p0391

View Articletitled, The Characteristics of Diamond Film Deposited by Magnet-Enhanced Plasma Jet CVD

Characterization of Copper and Steel Coatings Made by the Cold Gas-Dynamic Spray Method

R.C. McCune; W.T. Donlon; E.L. Cartwright; A.N. Papyrin; E.F. Rybicki; J.R. Shadley

ITSC 1996; 397-403https://doi.org/10.31399/asm.cp.itsc1996p0397

View Articletitled, Characterization of Copper and Steel Coatings Made by the Cold Gas-Dynamic Spray Method

Effect on Reverse Transferred Arc Treating on Bonding Strength in Low Pressure Plasma Spraying

K. Honda; I. Chida; T. Fuse; T. Murakami; K.F. Kobayashi

ITSC 1996; 405-411https://doi.org/10.31399/asm.cp.itsc1996p0405

View Articletitled, Effect on Reverse Transferred Arc Treating on Bonding Strength in Low Pressure Plasma Spraying

Iron-Based Deposits Produced by High-Throughput Water Stabilized Plasma

K. Dobler; J.R.T. Branco; S. Sampath; C.C. Berndt; H. Herman; P.J. Chráska

ITSC 1996; 413-418https://doi.org/10.31399/asm.cp.itsc1996p0413

View Articletitled, Iron-Based Deposits Produced by High-Throughput Water Stabilized Plasma

Processing Effects on Structure

Particle Size Effects on Chemistry and Structure of Al-Cu-Fe Quasicrystalline Plasma Sprayed Coatings

D. Sordelet; M. Besser

ITSC 1996; 419-428https://doi.org/10.31399/asm.cp.itsc1996p0419

View Articletitled, Particle Size Effects on Chemistry and Structure of Al-Cu-Fe Quasicrystalline Plasma Sprayed Coatings

Investigation of the Silicon Loss in APS MoSi₂ under Typical Spray Conditions

K.J. Hollis; A. Bartlett; R.G. Castro; R.A. Neiser

ITSC 1996; 429-437https://doi.org/10.31399/asm.cp.itsc1996p0429

View Articletitled, Investigation of the Silicon Loss in APS MoSi<sub>2</sub> under Typical Spray Conditions

Characteristics of High Hardness Zirconia Coatings Formed by Gas Tunnel Type Plasma Spraying

A. Kobayashi; T. Kitamura

ITSC 1996; 439-444https://doi.org/10.31399/asm.cp.itsc1996p0439

View Articletitled, Characteristics of High Hardness Zirconia Coatings Formed by Gas Tunnel Type Plasma Spraying

Peculiarities of the Structure and Phase Composition of Hydroxy Apatite Coatings Sprayed by Laminar Plasma Jet and Treated by Electron Beam

V.A. Klimenov; Yu. F. Ivanov; A.V. Karlov; V.V. Trophimov; L.B. Bataeva

ITSC 1996; 445-450https://doi.org/10.31399/asm.cp.itsc1996p0445

View Articletitled, Peculiarities of the Structure and Phase Composition of Hydroxy Apatite Coatings Sprayed by Laminar Plasma Jet and Treated by Electron Beam

High Velocity Oxy-Fuel Flame Spraying-Process and Coating Characteristics

H. Kreye; R. Schwetzke; S. Zimmermann

ITSC 1996; 451-456https://doi.org/10.31399/asm.cp.itsc1996p0451

View Articletitled, High Velocity Oxy-Fuel Flame Spraying-Process and Coating Characteristics

Thick Coatings(>1.5 mm) of CoNiCrAlY Sprayed by HVOF

N. Mingotaud; A. Bertoli; P. Fauchais

ITSC 1996; 457-462https://doi.org/10.31399/asm.cp.itsc1996p0457

View Articletitled, Thick Coatings(>1.5 mm) of CoNiCrAlY Sprayed by HVOF

Effects of Pressure Deposition on Plasma Jet and Coatings Microstructure

T. Valente; L. Bertamini; M. Tului

ITSC 1996; 463-470https://doi.org/10.31399/asm.cp.itsc1996p0463

View Articletitled, Effects of Pressure Deposition on Plasma Jet and Coatings Microstructure

Oxygen Partial Pressure Measurement in the Plasma Gun Jet

K. Korpiola; H. Jalkanen; T. Kinos; P. Siitonten; P. Vuoristo

ITSC 1996; 471-476https://doi.org/10.31399/asm.cp.itsc1996p0471

View Articletitled, Oxygen Partial Pressure Measurement in the Plasma Gun Jet

Post-Processing of Coatings

Ceramic Impregnation of Plasma Sprayed Thermal Barrier Coatings

J. Kathikeyan; C.C. Berndt; A. Ristorucci; H. Herman

ITSC 1996; 477-482https://doi.org/10.31399/asm.cp.itsc1996p0477

View Articletitled, Ceramic Impregnation of Plasma Sprayed Thermal Barrier Coatings

Surface Modification of Thermal Sprayed Coatings

G. John; T. Troczynski

ITSC 1996; 483-488https://doi.org/10.31399/asm.cp.itsc1996p0483

View Articletitled, Surface Modification of Thermal Sprayed Coatings

Characteristics of Phosphoric Acid Sealed Ceramic Oxide Coatings

E. Kumpulainen; M. Vippola; P. Vuoristo; P. Sorsa; T. Mäntylä

ITSC 1996; 489-491https://doi.org/10.31399/asm.cp.itsc1996p0489

View Articletitled, Characteristics of Phosphoric Acid Sealed Ceramic Oxide Coatings

Effect of Grinding Mechanisms on Surface Finish and Hardness of Thermally Sprayed WC-Co

A. Ibrahim; S. Sampath

ITSC 1996; 493-499https://doi.org/10.31399/asm.cp.itsc1996p0493

View Articletitled, Effect of Grinding Mechanisms on Surface Finish and Hardness of Thermally Sprayed WC-Co

Microfinishing Behavior of Chrome Oxide Coatings on Anilox Print Rolls: High Power vs. Conventional Plasma Spray

E. Sampson; R. Miller; S. Lacourse

ITSC 1996; 501-509https://doi.org/10.31399/asm.cp.itsc1996p0501

View Articletitled, Microfinishing Behavior of Chrome Oxide Coatings on Anilox Print Rolls: High Power vs. Conventional Plasma Spray

Diagnostic Measurements

Particle Velocity and Temperature influences on the Microstructure of Plasma Sprayed Nickel

R.N. Wright; J.R. Fincke; W.D. Swank; D.C. Haggard

ITSC 1996; 511-516https://doi.org/10.31399/asm.cp.itsc1996p0511

View Articletitled, Particle Velocity and Temperature influences on the Microstructure of Plasma Sprayed Nickel

Correlation between Particle Temperature and Velocity and the Structure of Plasma Sprayed Zirconia Coatings

M. Prystay; P. Gougeon; C. Moreau

ITSC 1996; 517-523https://doi.org/10.31399/asm.cp.itsc1996p0517

View Articletitled, Correlation between Particle Temperature and Velocity and the Structure of Plasma Sprayed Zirconia Coatings

Correlations Between In-Flight Particle Concentrations and Coating Properties in Atmospheric Plasma Spraying of Alumina

T. Lehtinen; J. Knuuttila; J. Vattulainen; T. Mäntylä; R. Hernberg

ITSC 1996; 525-530https://doi.org/10.31399/asm.cp.itsc1996p0525

View Articletitled, Correlations Between In-Flight Particle Concentrations and Coating Properties in Atmospheric Plasma Spraying of Alumina

Computational Fluid Dynamics Analysis of a Wire-Feed, High-Velocity Oxygen-Fuel (HVOF) Thermal Spray Torch

A.R. Lopez; B. Hassan; W.L. Oberkampf; R.A. Neiser; T.J. Roemer

ITSC 1996; 531-540https://doi.org/10.31399/asm.cp.itsc1996p0531

View Articletitled, Computational Fluid Dynamics Analysis of a Wire-Feed, High-Velocity Oxygen-Fuel (HVOF) Thermal Spray Torch

Process Modeling

Measured and Simulated Particle Flow Field Parameters in a High Power Plasma Spray

W.D. Swank; C.H. Chang; J.R. Fincke; D.C. Haggard

ITSC 1996; 541-546https://doi.org/10.31399/asm.cp.itsc1996p0541

View Articletitled, Measured and Simulated Particle Flow Field Parameters in a High Power Plasma Spray

Vaporization of Metal Powders in Plasma Sprays

K.-I. Li; M. Vardelle; A. Vardelle; P. Fauchais; C. Trassy

ITSC 1996; 547-552https://doi.org/10.31399/asm.cp.itsc1996p0547

View Articletitled, Vaporization of Metal Powders in Plasma Sprays

Influence of Shroud Gas Flow and Swirl Magnitude on Arc Jet Stability and Coating Quality in Plasma Spray

H.C. Chen; Z. Duan; J. Heberlein; E. Pfender

ITSC 1996; 553-561https://doi.org/10.31399/asm.cp.itsc1996p0553

View Articletitled, Influence of Shroud Gas Flow and Swirl Magnitude on Arc Jet Stability and Coating Quality in Plasma Spray

On the Modeling Approach of DC Arc Plasma Flows by Implementation of the CFD Phoenics Code

P. Eichert; C. Coddet; M. Imbed

ITSC 1996; 563-568https://doi.org/10.31399/asm.cp.itsc1996p0563

View Articletitled, On the Modeling Approach of DC Arc Plasma Flows by Implementation of the CFD Phoenics Code

Mathematical Model for Process Thermal Spraying Coating Formation

A. Ilyuchenko; P. Vityaz; V. Okovity; V. Abrashin; G. Gromyko; T. Veremeinko; G. Zajac

ITSC 1996; 569-576https://doi.org/10.31399/asm.cp.itsc1996p0569

View Articletitled, Mathematical Model for Process Thermal Spraying Coating Formation

Voltage and Current Fluctuations in Wire Arc Spraying as Indications for Coating Properties

T. Watanabe; X. Wang; J. Heberlein; E. Pfender; W. Herwig

ITSC 1996; 577-583https://doi.org/10.31399/asm.cp.itsc1996p0577

View Articletitled, Voltage and Current Fluctuations in Wire Arc Spraying as Indications for Coating Properties

Gas Dynamical Parameters of Detonation Powder Spraying

E. Kadyrov

ITSC 1996; 585-593https://doi.org/10.31399/asm.cp.itsc1996p0585

View Articletitled, Gas Dynamical Parameters of Detonation Powder Spraying

Numerical Simulation of a Multi-Component Reacting Flow in a Supersonic DC Torch Nozzle

C. George; E. Pfender; H.-D. Steffens

ITSC 1996; 595-602https://doi.org/10.31399/asm.cp.itsc1996p0595

View Articletitled, Numerical Simulation of a Multi-Component Reacting Flow in a Supersonic DC Torch Nozzle

Modeling of the Laser Engraving at Plasma Sprayed Cr₂O₃ Coatings on Anilox Rolls

M. Groc; L. Pawlowski; I. Smurov; G. Clinton; R. Pitt

ITSC 1996; 603-613https://doi.org/10.31399/asm.cp.itsc1996p0603

View Articletitled, Modeling of the Laser Engraving at Plasma Sprayed Cr<sub>2</sub>O<sub>3</sub> Coatings on Anilox Rolls

Crystalline Growth within Alumina and Zirconia Coatings with Coating Temperature Control during Spraying

A. Haddadi; A. Grimaud; A. Denoirjean; F. Nardou; P. Fauchais

ITSC 1996; 615-622https://doi.org/10.31399/asm.cp.itsc1996p0615

View Articletitled, Crystalline Growth within Alumina and Zirconia Coatings with Coating Temperature Control during Spraying

Modeling of Splats

Plasma Sprayed Zirconia: Relationships Between Particle Parameters, Splat Formation and Deposit Generation-Part I: Impact and Solidification

A.C. Léger; M. Vardelle; A. Vardelle; P. Fauchais; S. Sampath; C.C. Berndt; H. Herman

ITSC 1996; 623-628https://doi.org/10.31399/asm.cp.itsc1996p0623

View Articletitled, Plasma Sprayed Zirconia: Relationships Between Particle Parameters, Splat Formation and Deposit Generation-Part I: Impact and Solidification

Plasma Sprayed Zirconia: Relationships among Particle Parameters, Splat Formation, and Deposit Generation - Part II: Microstructure and Properties

S. Sampath; J. Matejicek; C.C. Berndt; H. Herman; A.C. Léger; M. Vardelle; A. Vardelle; P. Fauchais

ITSC 1996; 629-636https://doi.org/10.31399/asm.cp.itsc1996p0629

View Articletitled, Plasma Sprayed Zirconia: Relationships among Particle Parameters, Splat Formation, and Deposit Generation - Part II: Microstructure and Properties

Droplet Impact and Solidification in a Thermal Spray Process: Droplet-Substrate Interactions

M. Pasandideh-Fard; J. Mostaghimi

ITSC 1996; 637-646https://doi.org/10.31399/asm.cp.itsc1996p0637

View Articletitled, Droplet Impact and Solidification in a Thermal Spray Process: Droplet-Substrate Interactions

Mathematical Modeling of Flattening Process on Rough Surfaces in Thermal Spray

H. Fukanuma

ITSC 1996; 647-656https://doi.org/10.31399/asm.cp.itsc1996p0647

View Articletitled, Mathematical Modeling of Flattening Process on Rough Surfaces in Thermal Spray

Splat Solidification of Tin Droplets

R. Bhola; S. Chandra

ITSC 1996; 657-663https://doi.org/10.31399/asm.cp.itsc1996p0657

View Articletitled, Splat Solidification of Tin Droplets

Parameterization and Control

Independent Control of HVOF Particle Velocity and Temperature

C.M. Hackett; G.S. Settles

ITSC 1996; 665-673https://doi.org/10.31399/asm.cp.itsc1996p0665

View Articletitled, Independent Control of HVOF Particle Velocity and Temperature

On-Line Diagnostics of Traditional Flame Spraying as a Tool to Increase Reproducibility

J. Wigren; M.-O. Hansson; P. Gougeon; C. Moreau

ITSC 1996; 675-681https://doi.org/10.31399/asm.cp.itsc1996p0675

View Articletitled, On-Line Diagnostics of Traditional Flame Spraying as a Tool to Increase Reproducibility

Parametric Study of Suspension Plasma Sprayed Hydroxyapatite

E. Boyer; F. Gitzhofer; M. Boulos

ITSC 1996; 683-691https://doi.org/10.31399/asm.cp.itsc1996p0683

View Articletitled, Parametric Study of Suspension Plasma Sprayed Hydroxyapatite

Coating Thickness Prediction and Robot Trajectory Generation of Thermal Sprayed Coatings

P. Nylén; I. Fransson; A. Wretland; N. Mårtensson

ITSC 1996; 693-698https://doi.org/10.31399/asm.cp.itsc1996p0693

View Articletitled, Coating Thickness Prediction and Robot Trajectory Generation of Thermal Sprayed Coatings

Experimental/Analytical Investigations of Air Plasma Spray Tungsten Carbide-Cobalt Coatings at Kelly Air Force Base

D.J. Varacalle, Jr.; E. Acosta; J. Figert; M. Syma; J. Worthington; D. Carrillo

ITSC 1996; 699-707https://doi.org/10.31399/asm.cp.itsc1996p0699

View Articletitled, Experimental/Analytical Investigations of Air Plasma Spray Tungsten Carbide-Cobalt Coatings at Kelly Air Force Base

A Complete Predictor Methodology for the Plasma Spray Process

D.J. Varacalle, Jr.; K. Barnett

ITSC 1996; 709-715https://doi.org/10.31399/asm.cp.itsc1996p0709

View Articletitled, A Complete Predictor Methodology for the Plasma Spray Process

An Experimental Study of Twin-Wire Electric Arc Sprayed Zinc and Aluminum Coatings

D.J. Varacalle, Jr.; D.L. Hagrman; J.R. Fincke; W.D. Swank; V. Zanchuck; E. Sampson

ITSC 1996; 717-723https://doi.org/10.31399/asm.cp.itsc1996p0717

View Articletitled, An Experimental Study of Twin-Wire Electric Arc Sprayed Zinc and Aluminum Coatings

Microstructural Characterization and Properties

The Effect of Spray Distance and Chemistry on Pore and Crack Development in Plasma Sprayed Ceramic Deposits

J. Ilavsky; G.G. Long; A.J. Allen; H. Herman; C.C. Berndt

ITSC 1996; 725-728https://doi.org/10.31399/asm.cp.itsc1996p0725

View Articletitled, The Effect of Spray Distance and Chemistry on Pore and Crack Development in Plasma Sprayed Ceramic Deposits

Microstructure and Properties of Thermally Sprayed TiC-Ni and (Ti,Mo) C-NiCo Coatings

P. Vuoristo; T. Stenberg; T. Mäntylä; L.-M. Berger; M. Nebelung

ITSC 1996; 729-734https://doi.org/10.31399/asm.cp.itsc1996p0729

View Articletitled, Microstructure and Properties of Thermally Sprayed TiC-Ni and (Ti,Mo) C-NiCo Coatings

The Structure and Thermal Properties of Plasma Sprayed Beryllium for the International Thermonuclear Experimental Reactor (ITER)

R.G. Castro; A.H. Bartlett; K.E. Elliot; K.J. Hollis

ITSC 1996; 735-739https://doi.org/10.31399/asm.cp.itsc1996p0735

View Articletitled, The Structure and Thermal Properties of Plasma Sprayed Beryllium for the International Thermonuclear Experimental Reactor (ITER)

Stereological Characterization of the Apparent Void Content of Thermal Spray Deposits

G. Montavon; C. Coddet

ITSC 1996; 741-747https://doi.org/10.31399/asm.cp.itsc1996p0741

View Articletitled, Stereological Characterization of the Apparent Void Content of Thermal Spray Deposits

Generation of Alumina Plasma Sprayed Coatings on Alumina Substances

L. Bianchi; A. Denoirjean; P. Fauchais; O. Postel

ITSC 1996; 749-755https://doi.org/10.31399/asm.cp.itsc1996p0749

View Articletitled, Generation of Alumina Plasma Sprayed Coatings on Alumina Substances

Structure and Properties of Stainless Steels Coatings Produced by Supersonic Plasma Spraying Method

Yu. Borisov; A. Borisova; V. Golnik; A. Murashov; V. Bobrik

ITSC 1996; 757-763https://doi.org/10.31399/asm.cp.itsc1996p0757

View Articletitled, Structure and Properties of Stainless Steels Coatings Produced by Supersonic Plasma Spraying Method

Phase Transformations on Flame Sprayed Alumina

R.S. Lima; C.P. Bergmann

ITSC 1996; 765-771https://doi.org/10.31399/asm.cp.itsc1996p0765

View Articletitled, Phase Transformations on Flame Sprayed Alumina

Training in Coating Evaluation Techniques - A Unique Approach for Discussion

J.P. Sauer

ITSC 1996; 773-776https://doi.org/10.31399/asm.cp.itsc1996p0773

View Articletitled, Training in Coating Evaluation Techniques - A Unique Approach for Discussion

Metallographic Preparation of Thermal Spray Coatings: Coating Sensitivity and the Effect of Polishing Intangibles

J.P. Sauer

ITSC 1996; 777-783https://doi.org/10.31399/asm.cp.itsc1996p0777

View Articletitled, Metallographic Preparation of Thermal Spray Coatings: Coating Sensitivity and the Effect of Polishing Intangibles

A Comprehensive Approach for Advancing Plasma Spray Processing Technology

K. Sampath; E.J. Onesto

ITSC 1996; 785-792https://doi.org/10.31399/asm.cp.itsc1996p0785

View Articletitled, A Comprehensive Approach for Advancing Plasma Spray Processing Technology

An Investigation of the Electrical Behavior of Thermally Sprayed Aluminum Oxide

C.J. Swindeman; R.D. Seals; W.P. Murray; M.H. Cooper; R.L. White

ITSC 1996; 793-797https://doi.org/10.31399/asm.cp.itsc1996p0793

View Articletitled, An Investigation of the Electrical Behavior of Thermally Sprayed Aluminum Oxide

Thermal Measurements of Substrate during Spray Processes

O. Brandt; M. Wandelt

ITSC 1996; 799-802https://doi.org/10.31399/asm.cp.itsc1996p0799

View Articletitled, Thermal Measurements of Substrate during Spray Processes

Mechanical Properties of Coatings

Tensile Bond Strength Variance of Thermally Sprayed Coatings with Respect to Adhesive Type

K.A. Evans

ITSC 1996; 803-806https://doi.org/10.31399/asm.cp.itsc1996p0803

View Articletitled, Tensile Bond Strength Variance of Thermally Sprayed Coatings with Respect to Adhesive Type

Effect of Gas Velocity and Particle Velocity on Coating Adhesion in Wire Arc Spraying

X. Wang; J. Heberlein; E. Pfender; W. Gerberich

ITSC 1996; 807-811https://doi.org/10.31399/asm.cp.itsc1996p0807

View Articletitled, Effect of Gas Velocity and Particle Velocity on Coating Adhesion in Wire Arc Spraying

Elasticity Characteristics of Plasma Spray Coatings

L. Dekhtyar; A. Kleyman; S. Berman; V. Andreychuk

ITSC 1996; 813-818https://doi.org/10.31399/asm.cp.itsc1996p0813

View Articletitled, Elasticity Characteristics of Plasma Spray Coatings

Fatigue Strength of Ceramic-Coated Steel at Elevated Temperature

K. Sonoya; Y. Tomisawa

ITSC 1996; 819-825https://doi.org/10.31399/asm.cp.itsc1996p0819

View Articletitled, Fatigue Strength of Ceramic-Coated Steel at Elevated Temperature

Characterization of the Tensile Properties of Vacuum Plasma Spray Copper Deposits

G. Montavon; B. Robert; C. Verdy; V. Monin; K.E. Atcholi; C. Coddet

ITSC 1996; 827-833https://doi.org/10.31399/asm.cp.itsc1996p0827

View Articletitled, Characterization of the Tensile Properties of Vacuum Plasma Spray Copper Deposits

Mechanical Properties of Water Stabilized Plasma Spray-Formed Alumina-13wt% Titania

S.H. Leigh; C.C. Berndt; S. Sampath; H. Herman

ITSC 1996; 835-840https://doi.org/10.31399/asm.cp.itsc1996p0835

View Articletitled, Mechanical Properties of Water Stabilized Plasma Spray-Formed Alumina-13wt% Titania

Stress State Considerations of Coatings

Residual Stress in Net-Shape Plasma Sprayed Tubes: Measurement, Modeling and Modification

A.H. Bartlett; R.G. Castro

ITSC 1996; 841-845https://doi.org/10.31399/asm.cp.itsc1996p0841

View Articletitled, Residual Stress in Net-Shape Plasma Sprayed Tubes: Measurement, Modeling and Modification

Process and In-Service Residual Stresses in Thermal Barrier Systems

J. Wigren; L. Pejryd; B. Gudmundsson; R.T.R. McGrann; D.J. Greving; E.F. Rybicki; J.R. Shadley

ITSC 1996; 847-854https://doi.org/10.31399/asm.cp.itsc1996p0847

View Articletitled, Process and In-Service Residual Stresses in Thermal Barrier Systems

Effects of Powder Morphology, Microstructure, and Residual Stresses on Thermal Barrier Coating Thermal Shock Performance

J. Wigren; J.-F. de Vries; D. Greving

ITSC 1996; 855-861https://doi.org/10.31399/asm.cp.itsc1996p0855

View Articletitled, Effects of Powder Morphology, Microstructure, and Residual Stresses on Thermal Barrier Coating Thermal Shock Performance

Residual Stress Development during Thermal Spraying of WC-Co on Titanium

L. Pejyrd; J. Wigren; D.J. Greving; R.T.R. McGrann; J.R. Shadley; E.F. Rybicki

ITSC 1996; 863-868https://doi.org/10.31399/asm.cp.itsc1996p0863

View Articletitled, Residual Stress Development during Thermal Spraying of WC-Co on Titanium

Residual Stress Calculation by Finite Element Methods

H. Gruhn; W. Fischer; C. Funke; W. Malléner; D. Stöver

ITSC 1996; 869-874https://doi.org/10.31399/asm.cp.itsc1996p0869

View Articletitled, Residual Stress Calculation by Finite Element Methods

Residual Stress Analysis in Thermal Spray Coated Rolling Elements

R. Ahmed; M. Hadfield; S. Tobe

ITSC 1996; 875-883https://doi.org/10.31399/asm.cp.itsc1996p0875

View Articletitled, Residual Stress Analysis in Thermal Spray Coated Rolling Elements

Effects of Substrate Temperature and Thermal Cycles on Residual Stresses in Yttria Stabilized Zirconia Thermal Barrier Coatings

R.T.R. McGrann; J.A. Graves; E.F. Rybicki; J.R. Shadley; W.J. Brindley

ITSC 1996; 885-890https://doi.org/10.31399/asm.cp.itsc1996p0885

View Articletitled, Effects of Substrate Temperature and Thermal Cycles on Residual Stresses in Yttria Stabilized Zirconia Thermal Barrier Coatings

New Set-Up to Measure Residual Stresses during Plasma Sprayed Coating Formation and Cooling

A.C. Leger; A. Grimaud; P. Fauchais; C. Catteau

ITSC 1996; 891-896https://doi.org/10.31399/asm.cp.itsc1996p0891

View Articletitled, New Set-Up to Measure Residual Stresses during Plasma Sprayed Coating Formation and Cooling

Analysis of the Stress State in Thermal Barrier Coatings during a Thermal Cycle

G. Jönsson; C. Persson

ITSC 1996; 897-904https://doi.org/10.31399/asm.cp.itsc1996p0897

View Articletitled, Analysis of the Stress State in Thermal Barrier Coatings during a Thermal Cycle

Minimization of the Residual Bending of Plates with Sprayed Coatings

F. Kroupa; K. Neufuss; H. Lauschmann; A. Materna; V. Oliva

ITSC 1996; 905-910https://doi.org/10.31399/asm.cp.itsc1996p0905

View Articletitled, Minimization of the Residual Bending of Plates with Sprayed Coatings

Additional Papers

Repair of Water Turbine Blades by Wire Electric Arc Spraying

J. Musil; V. Dolhof; E. Dvorácek

ITSC 1996; 911-919https://doi.org/10.31399/asm.cp.itsc1996p0911

View Articletitled, Repair of Water Turbine Blades by Wire Electric Arc Spraying

Characterization of Thermally Sprayed Coatings Using Manual vs. Automated Microhardness Testing

G.A. Blann; M. Hoffmann

ITSC 1996; 921-926https://doi.org/10.31399/asm.cp.itsc1996p0921

View Articletitled, Characterization of Thermally Sprayed Coatings Using Manual vs. Automated Microhardness Testing

Reactive Plasma Spraying of Wear Resistant Coatings of Ti Composites

E. Lugscheider; P. Remer; L. Zhao

ITSC 1996; 927-932https://doi.org/10.31399/asm.cp.itsc1996p0927

View Articletitled, Reactive Plasma Spraying of Wear Resistant Coatings of Ti Composites

A Potential NDT Method for Rapid Quality Control of Thermal Sprayed Coatings

E. Lugscheider; P. Remer; C. Herbst; G. Barbezat

ITSC 1996; 933-940https://doi.org/10.31399/asm.cp.itsc1996p0933

View Articletitled, A Potential NDT Method for Rapid Quality Control of Thermal Sprayed Coatings

Modeling and Characterization of Residual Stresses and Microstructure in Thermal Barrier Coatings after Plasma Spraying

C. Persson; P. Bengtsson; J. Wigren; D. Greving

ITSC 1996; 941-946https://doi.org/10.31399/asm.cp.itsc1996p0941

View Articletitled, Modeling and Characterization of Residual Stresses and Microstructure in Thermal Barrier Coatings after Plasma Spraying

Nondestructive Characterization of Plasma Sprayed Coatings by Laser Ultrasonics

M. Viens; D. Drolet; A. Blouin; J.-P. Monchalin; C. Moreau

ITSC 1996; 947-951https://doi.org/10.31399/asm.cp.itsc1996p0947

View Articletitled, Nondestructive Characterization of Plasma Sprayed Coatings by Laser Ultrasonics

Volume Information

Preface

ITSC 1996; iiihttps://doi.org/10.31399/asm.cp.itsc1996fm01

View Articletitled, Preface

Organizing Committee

ITSC 1996; vhttps://doi.org/10.31399/asm.cp.itsc1996fm02

View Articletitled, Organizing Committee