Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Proceedings Volume Cover

ITSC2018

May 7–10, 2018

Orlando, Florida, USA

Conference Sponsors:

Thermal Spray 2018: Proceedings from the International Thermal Spray Conference

Issue navigation

Advanced Coatings for Aerospace Components
Research and Development
Poster Session
Thermal Spray Applications
Volume Information

Thermal Spray 2018: Proceedings from the International Thermal Spray Conference

Advanced Coatings for Aerospace Components

Abradable Coatings for Small Turboprop Engines: A Case Study of Nickel-Graphite Coating

J. Ziegelheim; L. Lombardi; Z. Pala; Z. Cesanek; S. Houdkova; J. Schubert; D. Jech; L. Celko

ITSC 2018; 1-7https://doi.org/10.31399/asm.cp.itsc2018p0001

View Articletitled, Abradable Coatings for Small Turboprop Engines: A Case Study of Nickel-Graphite Coating

Failure of Multi-Layer Suspension Plasma Sprayed Thermal Barrier Coatings in the Presence of Na2SO4 and NaCl at 900° C

Krishna Praveen Jonnalagadda; Stephanie Kramer; Pimin Zhang; Ru Lin Peng; Satyapal Mahade; Nicholas Curry; Xin-Hai Li

ITSC 2018; 8-15https://doi.org/10.31399/asm.cp.itsc2018p0008

View Articletitled, Failure of Multi-Layer Suspension Plasma Sprayed Thermal Barrier Coatings in the Presence of Na2SO4 and NaCl at 900° C

HVOF Thermal Sprayed MCrAlY-Alumina Composite Coatings for High Temperature Applications

Mingwen Bai; Bo Song; Liam Reddy; Tanvir Hussain

ITSC 2018; 16-23https://doi.org/10.31399/asm.cp.itsc2018p0016

View Articletitled, HVOF Thermal Sprayed MCrAlY-Alumina Composite Coatings for High Temperature Applications

In-Flight Analysis and Microstructural Evaluation of CoNiCrAlY Coatings Deposited by HVPS

F.R. Caliari; F.S. Miranda; G.P. Filho; A. Essiptchouk; D.A.P. Reis

ITSC 2018; 24-27https://doi.org/10.31399/asm.cp.itsc2018p0024

View Articletitled, In-Flight Analysis and Microstructural Evaluation of CoNiCrAlY Coatings Deposited by HVPS

Segmented Thermal Barrier Coatings for ID and OD Components Using the SinplexPro Plasma Torch

Dianying Chen; Riston Rocchio-Heller; Christopher Dambra; Oerlikon Metco

ITSC 2018; 28-34https://doi.org/10.31399/asm.cp.itsc2018p0028

View Articletitled, Segmented Thermal Barrier Coatings for ID and OD Components Using the SinplexPro Plasma Torch

Thermal Cyclic Life of Functionally-Graded Gadolinium Zirconate/Yttria Stabilized Zirconia Thermal Barrier Coating

Azril Dahari Johari; Abreeza Manap; Salmi Mohd Yunus

ITSC 2018; 35-41https://doi.org/10.31399/asm.cp.itsc2018p0035

View Articletitled, Thermal Cyclic Life of Functionally-Graded Gadolinium Zirconate/Yttria Stabilized Zirconia Thermal Barrier Coating

Fabrication of Ceramic Coatings by Cold-Spray in Agglomerated Y₂O₃ Particles

Yang Yang; Rifei Han; Lingyan Kong; Tianying Xiong; Tiefan Li

ITSC 2018; 42-46https://doi.org/10.31399/asm.cp.itsc2018p0042

View Articletitled, Fabrication of Ceramic Coatings by Cold-Spray in Agglomerated Y<sub>2</sub>O<sub>3</sub> Particles

Nanostructured CVD Tungsten Carbide Coating on Aircraft Actuators and Gearbox Shafts Reduces Oil Leakage and Improves Durability

Yuri Zhuk

ITSC 2018; 47-53https://doi.org/10.31399/asm.cp.itsc2018p0047

View Articletitled, Nanostructured CVD Tungsten Carbide Coating on Aircraft Actuators and Gearbox Shafts Reduces Oil Leakage and Improves Durability

Nondestructive Evaluation and Analyses of Thermal Spray Coatings: Latest Technology Progresses and Case Studies

Xinqing Ma; Peter Ruggiero

ITSC 2018; 54-61https://doi.org/10.31399/asm.cp.itsc2018p0054

View Articletitled, Nondestructive Evaluation and Analyses of Thermal Spray Coatings: Latest Technology Progresses and Case Studies

Study of Mechanical Performance and Residual Stress in Kinetic Metallization WC-Co Coatings

Andrew S.M. Ang; Christopher C. Berndt; Vladimir Luzin; Travis Crowe; Howard Gabel

ITSC 2018; 62-68https://doi.org/10.31399/asm.cp.itsc2018p0062

View Articletitled, Study of Mechanical Performance and Residual Stress in Kinetic Metallization WC-Co Coatings

Influence of Spray Process Parameters on Microstructure and Properties of AlSi–Hexagonal Boron Nitride Abradable Seal Coating

Tong Liu; Yueguang Yu; Jianming Liu; Xuying Cheng; Deming Zhang; Suyuan Yang

ITSC 2018; 69-74https://doi.org/10.31399/asm.cp.itsc2018p0069

View Articletitled, Influence of Spray Process Parameters on Microstructure and Properties of AlSi–Hexagonal Boron Nitride Abradable Seal Coating

Mechanical Properties and CMAS Corrosion Resistance of La₂Ce₂O₇/YSZ Composite Thermal Barrier Coatings

Y.X. Kang; Y. Bai; C.G. Bao; W. Fan; L. Zhang

ITSC 2018; 75-78https://doi.org/10.31399/asm.cp.itsc2018p0075

View Articletitled, Mechanical Properties and CMAS Corrosion Resistance of La<sub>2</sub>Ce<sub>2</sub>O<sub>7</sub>/YSZ Composite Thermal Barrier Coatings

Effect of YSZ Thickness on the Thermal Cyclic Fatigue Performance of Gadolinium Zirconate/YSZ Double Layered TBCs

Satyapal Mahade; Nicolaie Markocsan; Nicholas Curry

ITSC 2018; 79-83https://doi.org/10.31399/asm.cp.itsc2018p0079

View Articletitled, Effect of YSZ Thickness on the Thermal Cyclic Fatigue Performance of Gadolinium Zirconate/YSZ Double Layered TBCs

Effect of Spray Parameters on Porosity and Lifetime of Suspension Plasma Sprayed Thermal Barrier Coatings

Omkar Aranke; Mohit Gupta; Nicolaie Markocsan; Björn Kjellman; Xin-Hai Li

ITSC 2018; 84-91https://doi.org/10.31399/asm.cp.itsc2018p0084

View Articletitled, Effect of Spray Parameters on Porosity and Lifetime of Suspension Plasma Sprayed Thermal Barrier Coatings

Microstructural Characterization and Room Temperature Erosion Behaviour of As-Deposited SPS, EB-PVD and APS YSZ-based TBCs

Rogerio S. Lima; Bruno M. H. Guerreiro; Maniya Aghasibeig

ITSC 2018; 92-99https://doi.org/10.31399/asm.cp.itsc2018p0092

View Articletitled, Microstructural Characterization and Room Temperature Erosion Behaviour of As-Deposited SPS, EB-PVD and APS YSZ-based TBCs

Phase Stability, Fracture Toughness and Thermal Cycling Behavior of Supersonic Suspension Plasma Sprayed Scandia-Yttria Co-doped Zirconia Thermal Barrier Coatings

Wei Fan; Yu Bai; Yongxia Kang; Lei Zhang; Benqiang Li

ITSC 2018; 100-104https://doi.org/10.31399/asm.cp.itsc2018p0100

View Articletitled, Phase Stability, Fracture Toughness and Thermal Cycling Behavior of Supersonic Suspension Plasma Sprayed Scandia-Yttria Co-doped Zirconia Thermal Barrier Coatings

Hybrid Suspension/Solution Precursor Plasma Spraying of a Complex Ban (Mg_1/3Ta_2/3)O₃ Perovskite: Effects of Processing Parameters and Precursor Chemistry on Phase Formation and Decomposition

Huidong Hou; Jocelyn Veilleux; François Gitzhofera; Quansheng Wang; Ying Liu

ITSC 2018; 105-112https://doi.org/10.31399/asm.cp.itsc2018p0105

View Articletitled, Hybrid Suspension/Solution Precursor Plasma Spraying of a Complex Ban (Mg<sub>1/3</sub>Ta<sub>2/3</sub>)O<sub>3</sub> Perovskite: Effects of Processing Parameters and Precursor Chemistry on Phase Formation and Decomposition

Suspension Sprayed YSZ Thermal Barrier Coatings: Road to Industrial Application

Maria Barbosa; Filofteia-Laura Toma; Denise Beitelschmidt Fraunhofer; Omar Ligabue; Simone Bursich; Luca Tagliaferri

ITSC 2018; 113-119https://doi.org/10.31399/asm.cp.itsc2018p0113

View Articletitled, Suspension Sprayed YSZ Thermal Barrier Coatings: Road to Industrial Application

Research and Development

Instrumented Strain-Gage Measurement for Coating Adhesion During Four-Point Bending

Derek Landwehr; Jim Watts; Daryl Crawmer; Beth Aperavich

ITSC 2018; 120-125https://doi.org/10.31399/asm.cp.itsc2018p0120

View Articletitled, Instrumented Strain-Gage Measurement for Coating Adhesion During Four-Point Bending

An Investigation into the Mechanism for Enhanced Mechanical Properties in Friction Stir Welded AA2024-T3 Joints Coated with Cold Spraying

Na Li; Wenya Li; Xiawei Yang; Yaxin Xu; Yan Feng; Achilles Vairis

ITSC 2018; 126-133https://doi.org/10.31399/asm.cp.itsc2018p0126

View Articletitled, An Investigation into the Mechanism for Enhanced Mechanical Properties in Friction Stir Welded AA2024-T3 Joints Coated with Cold Spraying

Fabrication and Characterization of ICP Sprayed Boron Carbide Coating On Tungsten Monoblock

Qiujiao Zhou; Peng Zhao; Qijia Guo; Lin Li; Junling Chen; Yuedong Meng

ITSC 2018; 134-139https://doi.org/10.31399/asm.cp.itsc2018p0134

View Articletitled, Fabrication and Characterization of ICP Sprayed Boron Carbide Coating On Tungsten Monoblock

Fatigue Crack Growth in Plasma Sprayed Refractory Materials

Ondrej Kovarik; Ales Materna; Jan Siegl; Jan Cizek; Jakub Klecka

ITSC 2018; 140-147https://doi.org/10.31399/asm.cp.itsc2018p0140

View Articletitled, Fatigue Crack Growth in Plasma Sprayed Refractory Materials

Mechanisms on Vacuum Heat Treatment Promoting the Adhesion Strength of Thermal Sprayed Metallic Coatings

Guo-Hui Meng; Bang-Yan Zhang; Hong Liu; Tong Xu; Guan-Jun Yang; Cheng-Xin Li; Chang-Jiu Li

ITSC 2018; 148-153https://doi.org/10.31399/asm.cp.itsc2018p0148

View Articletitled, Mechanisms on Vacuum Heat Treatment Promoting the Adhesion Strength of Thermal Sprayed Metallic Coatings

Particle In-Flight Behavior and Its Significance in Determining the Microstructure and Mechanical Properties of Zirconia Based Thermal Barrier Coatings

L. Zhang; Y. Bai; Y. Wang; W. Fan; Y.X. Kang

ITSC 2018; 154-158https://doi.org/10.31399/asm.cp.itsc2018p0154

View Articletitled, Particle In-Flight Behavior and Its Significance in Determining the Microstructure and Mechanical Properties of Zirconia Based Thermal Barrier Coatings

Cold Spraying of Metallic Powders Onto Polymeric Substrates: Influence of Gas Preheating Temperature on the Coating Deposition

A. Sabard; A. Albassam; S. Chadha; T. Hussain

ITSC 2018; 159-165https://doi.org/10.31399/asm.cp.itsc2018p0159

View Articletitled, Cold Spraying of Metallic Powders Onto Polymeric Substrates: Influence of Gas Preheating Temperature on the Coating Deposition

Cold Spraying of Mixed Sn-Al Powders onto Carbon Fiber Reinforced Polymers

Andre Liberati; Hanqing Che; Stephen Yue; Phuong Vo

ITSC 2018; 166-172https://doi.org/10.31399/asm.cp.itsc2018p0166

View Articletitled, Cold Spraying of Mixed Sn-Al Powders onto Carbon Fiber Reinforced Polymers

Investigation of Cold Spray on Polymers by Single Particle Impact Experiments

Hanqing Che; Stephen Yue; Phuong Vo

ITSC 2018; 173-178https://doi.org/10.31399/asm.cp.itsc2018p0173

View Articletitled, Investigation of Cold Spray on Polymers by Single Particle Impact Experiments

Pin Fin Array Heat Sinks by Cold Spray Additive Manufacturing: Economics of Powder Recycling

J. Perry; P. Richer; B. Jodoin; E. Matte

ITSC 2018; 179-186https://doi.org/10.31399/asm.cp.itsc2018p0179

View Articletitled, Pin Fin Array Heat Sinks by Cold Spray Additive Manufacturing: Economics of Powder Recycling

Anisotropic Response of Cold Sprayed Copper Deposits

Kang Yang; Wenya Li

ITSC 2018; 187-193https://doi.org/10.31399/asm.cp.itsc2018p0187

View Articletitled, Anisotropic Response of Cold Sprayed Copper Deposits

Microstructure Characterization of Feedstock Ti-6Al-4V Powders and Their Evolution During Cold Spray Deposition and After Heat Treatment

Venkata Satish Bhattiprolu; Grant A. Crawford

ITSC 2018; 194-201https://doi.org/10.31399/asm.cp.itsc2018p0194

View Articletitled, Microstructure Characterization of Feedstock Ti-6Al-4V Powders and Their Evolution During Cold Spray Deposition and After Heat Treatment

Cold Spray Additive Manufacturing of Al/Diamond Composites Using Core-Shell-Structured Diamond

Shuo Yin; Rocco Lupoi; Chaoyue Chen

ITSC 2018; 202-209https://doi.org/10.31399/asm.cp.itsc2018p0202

View Articletitled, Cold Spray Additive Manufacturing of Al/Diamond Composites Using Core-Shell-Structured Diamond

Depositing Metallic Coatings on Polymer Substrates by Cold Spray Process

M.R. Rokni; S.R. Nutt; M.C. Gill; C.A. Widener; R.H. Hrabe

ITSC 2018; 210-218https://doi.org/10.31399/asm.cp.itsc2018p0210

View Articletitled, Depositing Metallic Coatings on Polymer Substrates by Cold Spray Process

New Insights Into the Formation Mechanism of Intertwining Interfaces in Cold Spray

Shuo Yin; Rocco Lupoi; Jan Cizek

ITSC 2018; 219-226https://doi.org/10.31399/asm.cp.itsc2018p0219

View Articletitled, New Insights Into the Formation Mechanism of Intertwining Interfaces in Cold Spray

Fundamental Investigation Into the Effects of In-process Heat Treatment in Cold Spray

Barry Aldwell; Ben Hunter; Richard Jenkins; Rocco Lupoi

ITSC 2018; 227-232https://doi.org/10.31399/asm.cp.itsc2018p0227

View Articletitled, Fundamental Investigation Into the Effects of In-process Heat Treatment in Cold Spray

Grain Refinement of Pure Al Coating via In-Situ Shot-Peening-Assisted Cold Spray

Ying-Kang Wei; Xiao-Tao Luo; Chang-Jiu Li

ITSC 2018; 233-237https://doi.org/10.31399/asm.cp.itsc2018p0233

View Articletitled, Grain Refinement of Pure Al Coating via In-Situ Shot-Peening-Assisted Cold Spray

Investigation of Cold Spray Bonding Mechanism Focusing on the Thin Oxide Film Present in the Deposition Interface

Yuji Ichikawa; Ryotaro Tokoro

ITSC 2018; 238-241https://doi.org/10.31399/asm.cp.itsc2018p0238

View Articletitled, Investigation of Cold Spray Bonding Mechanism Focusing on the Thin Oxide Film Present in the Deposition Interface

Organic Composite Metallization Using Low Pressure Cold Spraying

S. Costil; E. Aubignat; C. Langlade; V. Gillet; B. Courant; P. Casari; W. Knapp

ITSC 2018; 242-247https://doi.org/10.31399/asm.cp.itsc2018p0242

View Articletitled, Organic Composite Metallization Using Low Pressure Cold Spraying

Characterization of Cold Sprayed Ni Alloy 718 Coatings

Mike Walker; Paul Howes; Phil McNutt; Dave Harvey; Hong Dong; Fernando Cacho-Nerin; Paul Quinn

ITSC 2018; 248-255https://doi.org/10.31399/asm.cp.itsc2018p0248

View Articletitled, Characterization of Cold Sprayed Ni Alloy 718 Coatings

Effects of Feedstock Mixing Composition on the Cold Sprayability of Bimodal Size 316L/Fe Powder Mixtures

Xin Chu; Hanqing Che; Stephen Yue; Phuong Vo

ITSC 2018; 256-261https://doi.org/10.31399/asm.cp.itsc2018p0256

View Articletitled, Effects of Feedstock Mixing Composition on the Cold Sprayability of Bimodal Size 316L/Fe Powder Mixtures

Investigation of Particle/Substrate Bonding Between Copper Powder and Different Substrates in Cold Spray

Chaoyue Chen; Yingchun Xie; Xinliang Xie; Sihao Deng; Hanlin Liao; Renzhong Huang; Zhongming Ren

ITSC 2018; 262-269https://doi.org/10.31399/asm.cp.itsc2018p0262

View Articletitled, Investigation of Particle/Substrate Bonding Between Copper Powder and Different Substrates in Cold Spray

Modeling the Continuous Heat Generation in the Cold Spray Coating Process

Ozan C. Ozdemir; Qiyong Chen; Sinan Muftu; Victor K. Champagne, Jr.

ITSC 2018; 270-277https://doi.org/10.31399/asm.cp.itsc2018p0270

View Articletitled, Modeling the Continuous Heat Generation in the Cold Spray Coating Process

Effects of Interface Bonding on the Residual Stresses in Cold Sprayed Al-6061: A Numerical Investigation

Enqiang Lin; Qiyong Chen; Ozan C. Ozdemir; Sinan Müftü; Victor K. Champagne

ITSC 2018; 278-285https://doi.org/10.31399/asm.cp.itsc2018p0278

View Articletitled, Effects of Interface Bonding on the Residual Stresses in Cold Sprayed Al-6061: A Numerical Investigation

Numerical Study Using Nano-Particles by Varying the Expansion Ratio and Height of Cold Spray Nozzle to Predict Deposition Efficiency

Chirag Singhal; Qasim Murtaza

ITSC 2018; 286-293https://doi.org/10.31399/asm.cp.itsc2018p0286

View Articletitled, Numerical Study Using Nano-Particles by Varying the Expansion Ratio and Height of Cold Spray Nozzle to Predict Deposition Efficiency

An Optical Emission Spectroscopy Study of Plasma-Precursor Interactions in Solution Precursor Plasma Spray

Jérôme Menneveux; Jocelyn Veilleux

ITSC 2018; 294-298https://doi.org/10.31399/asm.cp.itsc2018p0294

View Articletitled, An Optical Emission Spectroscopy Study of Plasma-Precursor Interactions in Solution Precursor Plasma Spray

Characterization of Plasma Sprayed Zirconium Coatings on Uranium Alloy Using Neutron Diffraction

Kendall J. Hollis; Dustin R. Cummins; Sven C. Vogel; Donald W. Brown; David E. Dombrowski

ITSC 2018; 299-306https://doi.org/10.31399/asm.cp.itsc2018p0299

View Articletitled, Characterization of Plasma Sprayed Zirconium Coatings on Uranium Alloy Using Neutron Diffraction

Thermal Stability of Thermophysical Properties of Multiphase Fe-Al Intermetallic/ Oxide Ceramics Coatings Deposited by Gas Detonation Spraying 307

Andrzej J. Panas; Cezary Senderowski; Bartosz Fikus; Waldemar Wołczyński

ITSC 2018; 307-312https://doi.org/10.31399/asm.cp.itsc2018p0307

View Articletitled, Thermal Stability of Thermophysical Properties of Multiphase Fe-Al Intermetallic/ Oxide Ceramics Coatings Deposited by Gas Detonation Spraying 307

Influence of Grain Size on the Corrosion and Wear Behaviour of HVAF-Sprayed Fe-Based Coatings

K. Bobzin; M. Öte; M.A. Knoch; J. Sommer

ITSC 2018; 313-320https://doi.org/10.31399/asm.cp.itsc2018p0313

View Articletitled, Influence of Grain Size on the Corrosion and Wear Behaviour of HVAF-Sprayed Fe-Based Coatings

Porous Stainless-Steel Coatings Produced by HVOF and Chemical Leaching

A. R. C. Nascimento; S. Devaraj; C. Moreau; S. Savoie; R. Schulz

ITSC 2018; 321-329https://doi.org/10.31399/asm.cp.itsc2018p0321

View Articletitled, Porous Stainless-Steel Coatings Produced by HVOF and Chemical Leaching

Analysis and Optimization of the HVOF Process by Artificial Neural Networks Model

Liu Meimei; Yu Zexin; Chen Chaoyue; Liao Hanlin; Deng Sihao

ITSC 2018; 330-336https://doi.org/10.31399/asm.cp.itsc2018p0330

View Articletitled, Analysis and Optimization of the HVOF Process by Artificial Neural Networks Model

Chemical Composition Changes of Composite Abradable Powders During the Deposition Process

Yueguang Yu; Jianming Liu; Xiaoliang Lu; Deming Zhang; Xuying Cheng; Beijing General

ITSC 2018; 337-342https://doi.org/10.31399/asm.cp.itsc2018p0337

View Articletitled, Chemical Composition Changes of Composite Abradable Powders During the Deposition Process

Cost Effective Iron Based Alloys for Abrasive Wear

Barbara Maroli; Robert Frykholm; Sven Bengtsson; Sweden Höganäs

ITSC 2018; 343-348https://doi.org/10.31399/asm.cp.itsc2018p0343

View Articletitled, Cost Effective Iron Based Alloys for Abrasive Wear

Deposition of Lamellae Well Bonded Dense Ceramic Coatings by Plasma Spraying Through Materials Design

Chang-Jiu Li; Qi-Lan Zhang; Shu-Wei Yao; Guan-Jun Yang; Cheng-Xin Li

ITSC 2018; 349-354https://doi.org/10.31399/asm.cp.itsc2018p0349

View Articletitled, Deposition of Lamellae Well Bonded Dense Ceramic Coatings by Plasma Spraying Through Materials Design

Investigation of High Temperature Compressor Abradable Coatings for Gas Turbine Applications

Winnie Tan; Dimitrios Zois; Scott Wilson; Mitchell R. Dorfman

ITSC 2018; 355-360https://doi.org/10.31399/asm.cp.itsc2018p0355

View Articletitled, Investigation of High Temperature Compressor Abradable Coatings for Gas Turbine Applications

The Effect of Electromechanical Treatment on Structure and Properties of Plasma Sprayed Fe–30Cr-0.6C Coating

A.Yu. Ivannikov; V. I. Kalita; D. I. Komlev; A. A. Radyuk

ITSC 2018; 361-365https://doi.org/10.31399/asm.cp.itsc2018p0361

View Articletitled, The Effect of Electromechanical Treatment on Structure and Properties of Plasma Sprayed Fe–30Cr-0.6C Coating

On the Premise of Polymer Coating Modelling for Cold-Spray Process

C.A. Bernard; K. Ogawa; J.-Y. Cavaillé; O. Lame; K. Ravi; T. Deplancke

ITSC 2018; 366-370https://doi.org/10.31399/asm.cp.itsc2018p0366

View Articletitled, On the Premise of Polymer Coating Modelling for Cold-Spray Process

High Strain Rate Sensitivity of Ultra-High Molecular Weight Polyethylene and Its Consequence on Cold-Spray Deposition Behavior

Kesavan Ravi; Kazuhiro Ogawa; Tiana Deplancke; Olivier Lame; Jean-Yves Cavaillé

ITSC 2018; 371-374https://doi.org/10.31399/asm.cp.itsc2018p0371

View Articletitled, High Strain Rate Sensitivity of Ultra-High Molecular Weight Polyethylene and Its Consequence on Cold-Spray Deposition Behavior

TEM Studies of a Nano-Crystalline Cold Sprayed Ni-20Cr Coating

M. Kumar; H. Singh; N. Singh

ITSC 2018; 375-379https://doi.org/10.31399/asm.cp.itsc2018p0375

View Articletitled, TEM Studies of a Nano-Crystalline Cold Sprayed Ni-20Cr Coating

Thermally Sprayed Slippery and Icephobic Surfaces

H. Niemelä-Anttonen; H. Koivuluoto; M. Kylmälahti; J. Laakso; P. Vuoristo

ITSC 2018; 380-384https://doi.org/10.31399/asm.cp.itsc2018p0380

View Articletitled, Thermally Sprayed Slippery and Icephobic Surfaces

Characterization of Powder-Precursor HVOF-Sprayed Al₂O₃-ZrO₂ Coatings

Jarkko Kiilakoski; Jouni Puranen; Heli Koivuluoto; Petri Vuoristo

ITSC 2018; 385-389https://doi.org/10.31399/asm.cp.itsc2018p0385

View Articletitled, Characterization of Powder-Precursor HVOF-Sprayed Al<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub> Coatings

Effect of Molten Particle Temperature on the Bonding Formation During Plasma Spraying of Metal Alloy Coatings

Jun Wang; Jia-jia Tian; Chang-Jiu Li

ITSC 2018; 390-396https://doi.org/10.31399/asm.cp.itsc2018p0390

View Articletitled, Effect of Molten Particle Temperature on the Bonding Formation During Plasma Spraying of Metal Alloy Coatings

Investigation of a Pulsed DC Arc Spray Process

Dirk Landgrebe; Stefan Brumm; Sven Kunze; Jonas Kimme; Sebastian Weis; Jan Morgenschweis

ITSC 2018; 397-402https://doi.org/10.31399/asm.cp.itsc2018p0397

View Articletitled, Investigation of a Pulsed DC Arc Spray Process

Variation of Vaporized Coating Material in Free Plasma Jet of Plasma Spray-Physical Vapor Deposition Process

Mei-Jun Liu; Meng Zhang; Qiang Zhang; Guan-Jun Yang; Cheng-Xin Li; Chang-Jiu Li

ITSC 2018; 403-409https://doi.org/10.31399/asm.cp.itsc2018p0403

View Articletitled, Variation of Vaporized Coating Material in Free Plasma Jet of Plasma Spray-Physical Vapor Deposition Process

Determination of the Temperature Distribution of a Substrate Exposed to a Moving Cold or Thermal Spray Heat Source

Amirhossein Mahdavi; André McDonald

ITSC 2018; 410-416https://doi.org/10.31399/asm.cp.itsc2018p0410

View Articletitled, Determination of the Temperature Distribution of a Substrate Exposed to a Moving Cold or Thermal Spray Heat Source

Evaluation of Dynamic Wetting in the Flattening Behavior of Thermal Sprayed Particles

Masahiro Fukumoto; Natsuki Maeda

ITSC 2018; 417-421https://doi.org/10.31399/asm.cp.itsc2018p0417

View Articletitled, Evaluation of Dynamic Wetting in the Flattening Behavior of Thermal Sprayed Particles

Numerical Study on Particle Trajectories Close to the Substrates in Thermal Spray Processes with High-Kinetic and Low-Pressure Conditions

Georg Mauer; Robert Vaßen

ITSC 2018; 422-429https://doi.org/10.31399/asm.cp.itsc2018p0422

View Articletitled, Numerical Study on Particle Trajectories Close to the Substrates in Thermal Spray Processes with High-Kinetic and Low-Pressure Conditions

Utilizing Big Data Informatics for Thermal Spray Materials Design

Justin Cheney, Ph.D.

ITSC 2018; 430-435https://doi.org/10.31399/asm.cp.itsc2018p0430

View Articletitled, Utilizing Big Data Informatics for Thermal Spray Materials Design

Influence of Process Gas Composition on Laser Cladding Process Characteristics

A. Wank; C. Schmengler; A. Hitzek; W. Kroemmer; M. Runzka; B. Merten

ITSC 2018; 436-442https://doi.org/10.31399/asm.cp.itsc2018p0436

View Articletitled, Influence of Process Gas Composition on Laser Cladding Process Characteristics

Internal Diameter Coating Processes for Bond Coat (HVOF) and Thermal Barrier Coating (APS) Systems

W. Tillmann; C. Schaak; L. Hagen; G. Mauer; G. Matthäus Thermico

ITSC 2018; 443-450https://doi.org/10.31399/asm.cp.itsc2018p0443

View Articletitled, Internal Diameter Coating Processes for Bond Coat (HVOF) and Thermal Barrier Coating (APS) Systems

Ballistic Testing of a Double-Layer Shaped Charge Liner Fabricated by Kinetic Spraying

Seungtae Lee; Jaeick Kim; Changhee Lee; Seong Lee; Sijo Kim

ITSC 2018; 451-455https://doi.org/10.31399/asm.cp.itsc2018p0451

View Articletitled, Ballistic Testing of a Double-Layer Shaped Charge Liner Fabricated by Kinetic Spraying

Deposition of Multiphase Coatings from Liquid Feedstock using Hybrid Water-Stabilized (WSP-H) Plasma Torch

Tomas Tesar; Radek Musalek; Jan Medricky; Jan Cizek; Frantisek Lukac; Tomas Chraska

ITSC 2018; 456-462https://doi.org/10.31399/asm.cp.itsc2018p0456

View Articletitled, Deposition of Multiphase Coatings from Liquid Feedstock using Hybrid Water-Stabilized (WSP-H) Plasma Torch

Preparation of Functional, Compositionally Graded Metal Oxide Films via the Solution Precursor Plasma Spray Process

Zexin Yu; Meimei Liu; Michel Moliere; Hanlin Liao; Hatem Moussa; Raphaël Schneider; Weize Wang

ITSC 2018; 463-469https://doi.org/10.31399/asm.cp.itsc2018p0463

View Articletitled, Preparation of Functional, Compositionally Graded Metal Oxide Films via the Solution Precursor Plasma Spray Process

Electrical Properties of Dense Al₂O₃ Coatings Prepared by SPS Process

Hiroyuki Ibe; Takaya Masuda; Kazuto Sato; Nobuaki Kato

ITSC 2018; 470-474https://doi.org/10.31399/asm.cp.itsc2018p0470

View Articletitled, Electrical Properties of Dense Al<sub>2</sub>O<sub>3</sub> Coatings Prepared by SPS Process

Multivariate Analysis of the Influence of Process Parameters on Suspension Plasma-Sprayed Coatings

Yongli Zhao; François Peyraut; Marie-Pierre Planche; Hanlin Liao; Ghislain Montavon; Jan Ilavsky; Audrey Lasalle; Alain Allimant

ITSC 2018; 475-482https://doi.org/10.31399/asm.cp.itsc2018p0475

View Articletitled, Multivariate Analysis of the Influence of Process Parameters on Suspension Plasma-Sprayed Coatings

Hydrophobicity of Suspension HVOF Sprayed Rare Earth Oxide Coatings

Mingwen Bai; Hafsah Kazi; Xiaoli Zhang; Junpeng Liu; Bo Song; Tanvir Hussain

ITSC 2018; 483-489https://doi.org/10.31399/asm.cp.itsc2018p0483

View Articletitled, Hydrophobicity of Suspension HVOF Sprayed Rare Earth Oxide Coatings

Neutron Diffraction Residual Stress Measurements in Suspension HVOF Sprayed Al₂O₃ and YSZ Coatings

T. Owoseni; M. Bai; T. Hussain; N. H. Faisal; T.L. Lee; J. Kelleher

ITSC 2018; 490-495https://doi.org/10.31399/asm.cp.itsc2018p0490

View Articletitled, Neutron Diffraction Residual Stress Measurements in Suspension HVOF Sprayed Al<sub>2</sub>O<sub>3</sub> and YSZ Coatings

Suspension High Velocity Oxy Fuel (SHVOF) Thermal Spraying of Cr₂O₃ and Cr₂O₃ with Graphene Platelets for Dry Sliding Wear Protection

J. Pulsford; M. Bai; T. Hussain

ITSC 2018; 496-500https://doi.org/10.31399/asm.cp.itsc2018p0496

View Articletitled, Suspension High Velocity Oxy Fuel (SHVOF) Thermal Spraying of Cr<sub>2</sub>O<sub>3</sub> and Cr<sub>2</sub>O<sub>3</sub> with Graphene Platelets for Dry Sliding Wear Protection

High Temperature Corrosion Properties of Thermally Sprayed Ceramic Oxide Coatings

D. Fantozzi; J. Kiilakoski; H. Koivuluoto; P. Vuoristo; M. Uusitalo; G. Bolelli; V. Testa; L. Lusvarghi

ITSC 2018; 501-507https://doi.org/10.31399/asm.cp.itsc2018p0501

View Articletitled, High Temperature Corrosion Properties of Thermally Sprayed Ceramic Oxide Coatings

New Material Concepts for Thermally Sprayed Hydrodynamic Bearings

K. Bobzin; M. Öte; T. Königstein; W. Wietheger; T. Schröder; G. Jacobs; D. Bosse

ITSC 2018; 508-514https://doi.org/10.31399/asm.cp.itsc2018p0508

View Articletitled, New Material Concepts for Thermally Sprayed Hydrodynamic Bearings

Poster Session

Direct Spraying of Fine Ceramic Particles in Thermal Spray

Mohammed Shahien; Masato Suzuki; Kentaro Shinoda Jun Akedo

ITSC 2018; 515-520https://doi.org/10.31399/asm.cp.itsc2018p0515

View Articletitled, Direct Spraying of Fine Ceramic Particles in Thermal Spray

Mechanisms of Structure Formation and Thermo-Physical Properties of Gas Detonation Sprayed Fe-Al Type Coatings

Cezary Senderowski; Andrzej J. Panas; Bartosz Fikus; Waldemar Wołczyński

ITSC 2018; 521-527https://doi.org/10.31399/asm.cp.itsc2018p0521

View Articletitled, Mechanisms of Structure Formation and Thermo-Physical Properties of Gas Detonation Sprayed Fe-Al Type Coatings

Modeling and Assessment of Dynamic Properties and Thermal History of Powder Particles Under Gas Detonation Spraying Conditions Using a Propane-Air Mixture

Bartosz Fikus; Andrzej J. Panas; Cezary Senderowski; Waldemar Wołczyński

ITSC 2018; 528-534https://doi.org/10.31399/asm.cp.itsc2018p0528

View Articletitled, Modeling and Assessment of Dynamic Properties and Thermal History of Powder Particles Under Gas Detonation Spraying Conditions Using a Propane-Air Mixture

Pulsed Current and Pulsed Powder Operation of the One-Cathode-One-Anode-Plasma-Generator (OCOAPG)-Part II

Stephan Zimmermann; Jochen Schein

ITSC 2018; 535-538https://doi.org/10.31399/asm.cp.itsc2018p0535

View Articletitled, Pulsed Current and Pulsed Powder Operation of the One-Cathode-One-Anode-Plasma-Generator (OCOAPG)-Part II

Influence of Aluminum Oxide Grit Reuse on Surface Preparation and Bond Strength of Thermally Sprayed Coatings

Samantha Mayumi Zanella Odake; Gustavo Bavaresco Sucharski; Ramón Sigifredo Cortés Paredes; Irene Bida de Araujo Siqueira Fernandes; Rodolpho Fernando Vaz

ITSC 2018; 539-546https://doi.org/10.31399/asm.cp.itsc2018p0539

View Articletitled, Influence of Aluminum Oxide Grit Reuse on Surface Preparation and Bond Strength of Thermally Sprayed Coatings

Hot Corrosion Behavior of Selected Thermally Sprayed Alloy Based Coatings

Zdeněk Česánek; Jan Schubert; Šárka Houdková; František Lukáč

ITSC 2018; 547-552https://doi.org/10.31399/asm.cp.itsc2018p0547

View Articletitled, Hot Corrosion Behavior of Selected Thermally Sprayed Alloy Based Coatings

The Effects of Impurities on The Properties of YSZ Thermal Barrier Coatings

Ji Xiaojuan; Yu Yueguang; Zhang Deming; Li Yujie; Peng Haoran; Hou Wei’ao

ITSC 2018; 553-556https://doi.org/10.31399/asm.cp.itsc2018p0553

View Articletitled, The Effects of Impurities on The Properties of YSZ Thermal Barrier Coatings

The Structure and Oxidation Resistance Behavior of Ni-CrAlY Coatings Prepared by Plating Process

Lingfeng Huang; Jianming Liu; Xuying Cheng; Deming Zhang; Yueguang Yu

ITSC 2018; 557-560https://doi.org/10.31399/asm.cp.itsc2018p0557

View Articletitled, The Structure and Oxidation Resistance Behavior of Ni-CrAlY Coatings Prepared by Plating Process

High Temperature Erosion Mechanisms and Erosion Rate of Hard Coatings for Surface Recovery of Heavy-Fuel Engines

Javier Miranda; Lorena Bejarano; Alfredo Valarezo

ITSC 2018; 561-567https://doi.org/10.31399/asm.cp.itsc2018p0561

View Articletitled, High Temperature Erosion Mechanisms and Erosion Rate of Hard Coatings for Surface Recovery of Heavy-Fuel Engines

Thermal Spray Applications

Adhesion of Cold Sprayed Brass Coatings for Lead-Free Bearings

S. Theimer; M. Graunitz; F. Gärtner; T. Klassen

ITSC 2018; 568-573https://doi.org/10.31399/asm.cp.itsc2018p0568

View Articletitled, Adhesion of Cold Sprayed Brass Coatings for Lead-Free Bearings

Manufacture of Reflective Aluminium Surfaces Using Cold Spray

Richard Jenkins; Shuo Yin; Barry Aldwell; Rocco Lupoi

ITSC 2018; 574-580https://doi.org/10.31399/asm.cp.itsc2018p0574

View Articletitled, Manufacture of Reflective Aluminium Surfaces Using Cold Spray

Pretreatment and Coatability of Additive Manufactured Components Made by Means of Selective Laser Melting

W. Tillmann; L. Hagen; C. Schaak; R. Zielke; M. Schaper; M. E. Aydinöz

ITSC 2018; 581-588https://doi.org/10.31399/asm.cp.itsc2018p0581

View Articletitled, Pretreatment and Coatability of Additive Manufactured Components Made by Means of Selective Laser Melting

Synthesis of Carbon Nanotube Reinforced Al Matrix Composites via Cold Spray Deposition

Xinliang Xie; Chaoyue Chen; Yingchun Xie; Hanlin Liao; Zhanqiu Tan; Zhiqiang Li; Gang Ji

ITSC 2018; 589-596https://doi.org/10.31399/asm.cp.itsc2018p0589

View Articletitled, Synthesis of Carbon Nanotube Reinforced Al Matrix Composites via Cold Spray Deposition

Potential New Application for VLPPS Process as an Additive Manufacturing Device

Geoffrey Darut; Aymeric Niederhauser; Bertrand Jaccoud; Martin Sigrist; Elmar Mock; Marie Pierre Planche; Hanlin Liao; Ghislain Montavon

ITSC 2018; 597-603https://doi.org/10.31399/asm.cp.itsc2018p0597

View Articletitled, Potential New Application for VLPPS Process as an Additive Manufacturing Device

Development of Protective Thermal Spray Coatings for Lightweight Al Brake Rotor Discs

Dominique Poirier; Jean-Gabriel Legoux; Eric Irissou; Danick Gallant; Jimmy Jiang

ITSC 2018; 604-610https://doi.org/10.31399/asm.cp.itsc2018p0604

View Articletitled, Development of Protective Thermal Spray Coatings for Lightweight Al Brake Rotor Discs

Effects of Natural Gas Composition Variation On HVOF Coating

Andrew D. Steinmetz

ITSC 2018; 611-614https://doi.org/10.31399/asm.cp.itsc2018p0611

View Articletitled, Effects of Natural Gas Composition Variation On HVOF Coating

GROB Advances in Thermal Spray Technology Development for Cylinder Bore Applications in Mass Production

Bernhard Gand; Andreas Wörfel

ITSC 2018; 615-621https://doi.org/10.31399/asm.cp.itsc2018p0615

View Articletitled, GROB Advances in Thermal Spray Technology Development for Cylinder Bore Applications in Mass Production

Restoring Body of Valuable Historic Vehicles: An Innovative Approach by the Use of Thermal Spray Techniques

Andrea Chierichetti; Walter Cerri; Roberto Meloni; Luigino Barp

ITSC 2018; 622-626https://doi.org/10.31399/asm.cp.itsc2018p0622

View Articletitled, Restoring Body of Valuable Historic Vehicles: An Innovative Approach by the Use of Thermal Spray Techniques

Spinel Copper Ferrite and Zinc Ferrite Films Synthesized via Solution Precursor Plasma Spray Process for Functional Applications

Zexin Yu; Meimei Liu; Michel Moliere; Hanlin Liao; Hatem Moussa; Raphaël Schneider; Weize Wang

ITSC 2018; 627-634https://doi.org/10.31399/asm.cp.itsc2018p0627

View Articletitled, Spinel Copper Ferrite and Zinc Ferrite Films Synthesized via Solution Precursor Plasma Spray Process for Functional Applications

Development of a Thermal-Sprayed Coating System to Mitigate Ice Accumulation and Freezing Damage in Carbon Steel Pipes

Milad Rezvani Rad; André McDonald

ITSC 2018; 635-642https://doi.org/10.31399/asm.cp.itsc2018p0635

View Articletitled, Development of a Thermal-Sprayed Coating System to Mitigate Ice Accumulation and Freezing Damage in Carbon Steel Pipes

High Velocity Oxygen Fuel Spraying of Nanostructured Hydroxyapatite on Magnesium Alloy Substrate for Biomedical Application

Marzieh Mardali; Hamidreza Salimijazi; Fathallah Karimzadeh; Tom Coyle

ITSC 2018; 643-646https://doi.org/10.31399/asm.cp.itsc2018p0643

View Articletitled, High Velocity Oxygen Fuel Spraying of Nanostructured Hydroxyapatite on Magnesium Alloy Substrate for Biomedical Application

Improvement of Corrosion Resistance of Gray Cast Iron Components by Surfacing with Gas Metal Arc Welding

M. Oechsner; G. Andersohn; J. Ellermeier; B. Heider; U. Reisgen; R. Sharma; S. Wieland; E. Gonzalez

ITSC 2018; 647-654https://doi.org/10.31399/asm.cp.itsc2018p0647

View Articletitled, Improvement of Corrosion Resistance of Gray Cast Iron Components by Surfacing with Gas Metal Arc Welding

Manufacture of Low-Temperature SOFC by APS Coating Technology

Kang Yuan; Yueguang Yu; Xiaojuan Ji; Bin Zhu

ITSC 2018; 655-659https://doi.org/10.31399/asm.cp.itsc2018p0655

View Articletitled, Manufacture of Low-Temperature SOFC by APS Coating Technology

Plasma Sprayed Raney Nickel Coatings for Hydrogen Production by Alkaline Water Electrolysis

T. Liu; R. Reißner; G. Schiller; A. Ansar

ITSC 2018; 660-664https://doi.org/10.31399/asm.cp.itsc2018p0660

View Articletitled, Plasma Sprayed Raney Nickel Coatings for Hydrogen Production by Alkaline Water Electrolysis

Study on the Fabrication and Performance of Very Low Pressure Plasma Sprayed Large-Area Porous Metal Supported Solid Oxide Fuel Cell

Jiu-Tao Gao; Cheng-Xin Li; Yue-Peng Wang; Shan-Lin Zhang; Guan-Jun Yang; Chang-Jiu Li

ITSC 2018; 665-669https://doi.org/10.31399/asm.cp.itsc2018p0665

View Articletitled, Study on the Fabrication and Performance of Very Low Pressure Plasma Sprayed Large-Area Porous Metal Supported Solid Oxide Fuel Cell

The Design of Readable Arc Spray Alloys For Boilers Using Big Data Techniques

Justin Cheney, PhD

ITSC 2018; 670-674https://doi.org/10.31399/asm.cp.itsc2018p0670

View Articletitled, The Design of Readable Arc Spray Alloys For Boilers Using Big Data Techniques

An Economical Approach to Cold Gas Dynamic Spraying Using In-Line Nitrogen- Helium Blending

D. MacDonald; S. Rahmati; B. Jodoin; W. Birtch

ITSC 2018; 675-682https://doi.org/10.31399/asm.cp.itsc2018p0675

View Articletitled, An Economical Approach to Cold Gas Dynamic Spraying Using In-Line Nitrogen- Helium Blending

Cost-Effective Plasma Spraying for Large-Scale Applications

Jan Medricky; Radek Musalek; Marek Janata; Tomas Chraska; Frantisek Lukac

ITSC 2018; 683-689https://doi.org/10.31399/asm.cp.itsc2018p0683

View Articletitled, Cost-Effective Plasma Spraying for Large-Scale Applications

Development and Investigations of Special DC-Plasma Generator “Penta”

Stephan Zimmermann; Michal Szulc; Jochen Schein; Karin Müller-Roden; Christian Schmengler; Andreas Wank; Jochen Zierhut

ITSC 2018; 690-696https://doi.org/10.31399/asm.cp.itsc2018p0690

View Articletitled, Development and Investigations of Special DC-Plasma Generator “Penta”

The Role of Human Factors in the Future of Thermal Spray Processing

Graham Crannell; Stephen Adams; Jianyu Su; Maxwell Patek; Peter A. Beling; Ann Bolcavage; Roy McIntyre

ITSC 2018; 697-704https://doi.org/10.31399/asm.cp.itsc2018p0697

View Articletitled, The Role of Human Factors in the Future of Thermal Spray Processing

Ultrafine Powder Feeding in Cold Spray and FAPS Applications

Sylvain Desaulniers; Eric Bessette; Jessica Breton

ITSC 2018; 705-708https://doi.org/10.31399/asm.cp.itsc2018p0705

View Articletitled, Ultrafine Powder Feeding in Cold Spray and FAPS Applications

Comparison of TiO₂ Targets Manufactured by APS and Sintering Processes for PAPVD Coatings Suitable in Technological and Medical Applications

D. Jaramillo Raquejo; C. C. Palacio; H. Ageorges

ITSC 2018; 709-715https://doi.org/10.31399/asm.cp.itsc2018p0709

View Articletitled, Comparison of TiO<sub>2</sub> Targets Manufactured by APS and Sintering Processes for PAPVD Coatings Suitable in Technological and Medical Applications

Bacillus sp.–Triggered Biocorrosion of Arc Sprayed Aluminum Coatings in Artificial Seawater

Leila Abdoli; Yi Liu; Xiaoyan He; Hua Li

ITSC 2018; 716-720https://doi.org/10.31399/asm.cp.itsc2018p0716

View Articletitled, Bacillus sp.–Triggered Biocorrosion of Arc Sprayed Aluminum Coatings in Artificial Seawater

Corrosion and Algal Behaviors of HVOF Sprayed Fe-based Amorphous Coatings for Marine Applications

Haijun Zhang; Yongfeng Gong; Botao Zhang; Xiuyong Chen; Lijia Fang; Peipeng Jin; Hua Li

ITSC 2018; 721-726https://doi.org/10.31399/asm.cp.itsc2018p0721

View Articletitled, Corrosion and Algal Behaviors of HVOF Sprayed Fe-based Amorphous Coatings for Marine Applications

Evaluation of Two Repair Methods for Duplex-Coatings

Kirsten Bobzin; Mehmet Öte; Martin Andreas Knoch; Frank Prenger; Raphael Jantze

ITSC 2018; 727-731https://doi.org/10.31399/asm.cp.itsc2018p0727

View Articletitled, Evaluation of Two Repair Methods for Duplex-Coatings

Flame Sprayed Environmentally Friendly High Density Polyethylene (PE) and Capsaicin Composite Coatings for Marine Antifouling Applications

Yi Liu; Xiaoqi Shao; Jing Huang; Hua Li

ITSC 2018; 732-735https://doi.org/10.31399/asm.cp.itsc2018p0732

View Articletitled, Flame Sprayed Environmentally Friendly High Density Polyethylene (PE) and Capsaicin Composite Coatings for Marine Antifouling Applications

Influence of Spray Pattern on Residual Stresses and Coating Properties of Arc-Sprayed Aluminum Bronzes Sprayed with Different Gas Mixtures

M. Hauer; R. Banaschik; W. Krömmer; K.-M. Henkel

ITSC 2018; 736-743https://doi.org/10.31399/asm.cp.itsc2018p0736

View Articletitled, Influence of Spray Pattern on Residual Stresses and Coating Properties of Arc-Sprayed Aluminum Bronzes Sprayed with Different Gas Mixtures

Microstructural Analysis of Aluminum Coatings Deposited by HVOF Process on Complex Surfaces

Karen Juliana Vanat; Ramón Sigifredo Cortés Paredes; Anderson Geraldo Marenda Pukasiewicz

ITSC 2018; 744-751https://doi.org/10.31399/asm.cp.itsc2018p0744

View Articletitled, Microstructural Analysis of Aluminum Coatings Deposited by HVOF Process on Complex Surfaces

Evaluation of High Velocity Oxy-Fuel (HVOF) Deposition Process on Erosion and Abrasion Resistance of Tungsten Carbide Coatings

Murilo Sérgio Lamana; Anderson Geraldo Marenda Pukasiewicz

ITSC 2018; 752-758https://doi.org/10.31399/asm.cp.itsc2018p0752

View Articletitled, Evaluation of High Velocity Oxy-Fuel (HVOF) Deposition Process on Erosion and Abrasion Resistance of Tungsten Carbide Coatings

Investigation Into the Suitability of HVOF Nickel Based Cermets in Marine Hydraulic Service Subject to Biofouling

Hugo Howse; Andrew S.M. Ang; Scott A Wade; Christopher C. Berndt; Matthew Leigh; Richard Piola

ITSC 2018; 759-765https://doi.org/10.31399/asm.cp.itsc2018p0759

View Articletitled, Investigation Into the Suitability of HVOF Nickel Based Cermets in Marine Hydraulic Service Subject to Biofouling

Macroline – New Solutions to Improve Abrasive Wear Resistance

Oliver Lanz; Andrea Scrivani

ITSC 2018; 766-773https://doi.org/10.31399/asm.cp.itsc2018p0766

View Articletitled, Macroline – New Solutions to Improve Abrasive Wear Resistance

Wear and Corrosion Behavior of Thermally Sprayed FeCrMnBC Coatings for Pump Parts

Matthias Oechsner; Marius Siebers; Georg Andersohn; Jörg Ellermeier; Kirsten Bobzin; Lidong Zhao; Mehmet Öte; Tim Königstein

ITSC 2018; 774-780https://doi.org/10.31399/asm.cp.itsc2018p0774

View Articletitled, Wear and Corrosion Behavior of Thermally Sprayed FeCrMnBC Coatings for Pump Parts

Analysis of Mechanical and Tribocorrosion Properties of Thermally Sprayed Nb₂O₅ Coatings

Carlos R. C. Lima; Maria J. X. Belém; Flávio Camargo

ITSC 2018; 781-786https://doi.org/10.31399/asm.cp.itsc2018p0781

View Articletitled, Analysis of Mechanical and Tribocorrosion Properties of Thermally Sprayed Nb<sub>2</sub>O<sub>5</sub> Coatings

Characterizations and Properties of Titanium Nitride Composited Coatings Deposited by Very Low Pressure Reactive Plasma-Spraying

Xiujuan Fan; Geoffrey Darut; Marie Pierre Planche; Hanlin Liao; Ghislain Montavon

ITSC 2018; 787-791https://doi.org/10.31399/asm.cp.itsc2018p0787

View Articletitled, Characterizations and Properties of Titanium Nitride Composited Coatings Deposited by Very Low Pressure Reactive Plasma-Spraying

Fabrication of Superhydrophobic Ceramic Coatings via a Novel Solution Precursor Vacuum Plasma Spray Process

Pengyun Xu; Thomas W. Coyle; Javad Mostaghimi; Larry Pershin

ITSC 2018; 792-798https://doi.org/10.31399/asm.cp.itsc2018p0792

View Articletitled, Fabrication of Superhydrophobic Ceramic Coatings via a Novel Solution Precursor Vacuum Plasma Spray Process

Influence of Spraying Parameters on the Diamond Decomposition of HVOF-sprayed Nickel-Diamond Coatings

W. Tillmann; A. Brinkhoff

ITSC 2018; 799-805https://doi.org/10.31399/asm.cp.itsc2018p0799

View Articletitled, Influence of Spraying Parameters on the Diamond Decomposition of HVOF-sprayed Nickel-Diamond Coatings

Characteristics of Stainless Steel Powder of SUS316 Treated by Plasma Spheroidization using DC-Arc Plasma Spray Gun

Hirotomo Itagaki; Kotaro Hanada; Shingo Hirose

ITSC 2018; 806-810https://doi.org/10.31399/asm.cp.itsc2018p0806

View Articletitled, Characteristics of Stainless Steel Powder of SUS316 Treated by Plasma Spheroidization using DC-Arc Plasma Spray Gun

Development of Thermal Sprayed Thin Copper Coatings

Satish Tailor; Ankur Modi; S. C. Modi

ITSC 2018; 811-817https://doi.org/10.31399/asm.cp.itsc2018p0811

View Articletitled, Development of Thermal Sprayed Thin Copper Coatings

Investigations and New Physical Behaviour of Special DC-Plasma Generator Mettech “Axial III”

Stephan Zimmermann; Jochen Schein; Georg Mauer; Karl-Heinz Rauwald

ITSC 2018; 818-824https://doi.org/10.31399/asm.cp.itsc2018p0818

View Articletitled, Investigations and New Physical Behaviour of Special DC-Plasma Generator Mettech “Axial III”

Thermal Aging Fatigue Behavior of Functionally Graded TBCs: Oxidation Failure

Kang Yuan; Yueguang Yu; Xiaojuan Ji; Ru Lin Peng

ITSC 2018; 825-829https://doi.org/10.31399/asm.cp.itsc2018p0825

View Articletitled, Thermal Aging Fatigue Behavior of Functionally Graded TBCs: Oxidation Failure

Volume Information

Organizing Committees

ITSC 2018; iiihttps://doi.org/10.31399/asm.cp.itsc2018fm01

View Articletitled, Organizing Committees