Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2013: Proceedings from the International Thermal Spray Conference

Advanced Thermal Spray Coatings

Vapor Deposition of Metallic Coatings by Very Low Pressure Plasma Spraying

B. Vautherin; M.-P. Planche; R. Bolot; G. Montavon; A. Quet; L. Bianchi

ITSC 2013; 1-7https://doi.org/10.31399/asm.cp.itsc2013p0001

View Articletitled, Vapor Deposition of Metallic Coatings by Very Low Pressure Plasma Spraying

Comparative Investigation of Standard WC-Co and a New WC-FeCrAl Feedstock Powder

B. Hussong; J. Pfeiffer; B. Lehmert; L. Wojarski; W. Tillmann

ITSC 2013; 8-15https://doi.org/10.31399/asm.cp.itsc2013p0008

View Articletitled, Comparative Investigation of Standard WC-Co and a New WC-FeCrAl Feedstock Powder

Deposition and Oxidation of Oxide-Dispersed CoNiCrAlY Bondcoats

M. Okada; R. Vaßen; M. Karger; D. Sebold; D.E. Mack; M.O. Jarligo; F. Bozza

ITSC 2013; 16-21https://doi.org/10.31399/asm.cp.itsc2013p0016

View Articletitled, Deposition and Oxidation of Oxide-Dispersed CoNiCrAlY Bondcoats

Effects of Dry-Ice Blasting On Plasma-Sprayed Thermal Barrier Coatings

S.-J. Dong; B. Song; H.-L. Liao; C. Coddet; B. Hansz

ITSC 2013; 22-28https://doi.org/10.31399/asm.cp.itsc2013p0022

View Articletitled, Effects of Dry-Ice Blasting On Plasma-Sprayed Thermal Barrier Coatings

Mechanical Properties of Plasma Sprayed YSZ Coatings Measured Using TAT and TCT Test

Andrew Siao Ming Ang; Christopher C. Berndt

ITSC 2013; 29-34https://doi.org/10.31399/asm.cp.itsc2013p0029

View Articletitled, Mechanical Properties of Plasma Sprayed YSZ Coatings Measured Using TAT and TCT Test

Y₂O₃ and Yb₂O₃ Co-Doped Strontium Hafnate as a New Thermal Barrier Coating Material

W. Ma; P. Li; H.-Y. Dong; Y. Bai; J.-L. Zhao; X.-Z. Fan

ITSC 2013; 35-40https://doi.org/10.31399/asm.cp.itsc2013p0035

View Articletitled, Y<sub>2</sub>O<sub>3</sub> and Yb<sub>2</sub>O<sub>3</sub> Co-Doped Strontium Hafnate as a New Thermal Barrier Coating Material

A Novel Modification for Twin Wire Arc Spraying to Improve the Variety of Application

W. Tillmann; M. Abdulgader; L. Hagen

ITSC 2013; 41-46https://doi.org/10.31399/asm.cp.itsc2013p0041

View Articletitled, A Novel Modification for Twin Wire Arc Spraying to Improve the Variety of Application

High-Temperature Oxidation-Resistant Thermal Spray Coatings Based on MoSi₂ for Furnace Applications

S. Schuberth; T. Uhlig; H. Pokhmurska; C. Rupprecht; T. Lampke

ITSC 2013; 47-50https://doi.org/10.31399/asm.cp.itsc2013p0047

View Articletitled, High-Temperature Oxidation-Resistant Thermal Spray Coatings Based on MoSi<sub>2</sub> for Furnace Applications

Friction and Wear Properties of (Ti,Mo)(C,N) Hardmetal Coatings Prepared by Gas and Liquid Fuel HVOF Processes

L.-M. Berger; J. Kitamura; F. Kasahara; J. Yamada; K. Sato; P. Vuoristo; A. Milanti; K. Niemi; Š. Houdková; J. Savková

ITSC 2013; 51-56https://doi.org/10.31399/asm.cp.itsc2013p0051

View Articletitled, Friction and Wear Properties of (Ti,Mo)(C,N) Hardmetal Coatings Prepared by Gas and Liquid Fuel HVOF Processes

Dense MoB/CoCr Coatings to Apply to Pot-Roll of Galvanizing Lines in Steel Industries

J. Kitamura; T. Tosaki; H. Mizuno

ITSC 2013; 57-62https://doi.org/10.31399/asm.cp.itsc2013p0057

View Articletitled, Dense MoB/CoCr Coatings to Apply to Pot-Roll of Galvanizing Lines in Steel Industries

Effect of WC-Co-Cr Powder Properties on Coating Characteristics by Recent HVAF Spraying

Kazuto Sato; Hidenori Miyajima; Masami Kato; Junya Kitamura; Kazuhiko Sakaki

ITSC 2013; 63-67https://doi.org/10.31399/asm.cp.itsc2013p0063

View Articletitled, Effect of WC-Co-Cr Powder Properties on Coating Characteristics by Recent HVAF Spraying

Investigation of HVOF-Sprayed Hardmetal Coatings for Static Friction Applications

L.-M. Berger; J. Spatzier; M. Gräfensteiner; J. Vidner; E. Leidich; S. Schiefer; S. Gröger; M. Gerlach

ITSC 2013; 68-73https://doi.org/10.31399/asm.cp.itsc2013p0068

View Articletitled, Investigation of HVOF-Sprayed Hardmetal Coatings for Static Friction Applications

Thermally Sprayed Ti₃SiC₂ and Ti₂AlC MAX-Phase Coatings

R. Trache; R. Puschmann; C. Leyens; L.-M. Berger; B. Matthey; M. Herrmann

ITSC 2013; 74-78https://doi.org/10.31399/asm.cp.itsc2013p0074

View Articletitled, Thermally Sprayed Ti<sub>3</sub>SiC<sub>2</sub> and Ti<sub>2</sub>AlC MAX-Phase Coatings

Development of Thermal Spray Coating Solution for Ceramic Substrates

F.-L. Toma; L.-M. Berger; T. Hoffmann; U. Klotzbach; S. Scheitz; S. Thiele; M. Fries

ITSC 2013; 79-84https://doi.org/10.31399/asm.cp.itsc2013p0079

View Articletitled, Development of Thermal Spray Coating Solution for Ceramic Substrates

Applications and Case Studies

Corrosion Properties of Selected Coatings Produced by Atmospheric Plasma Spraying, HVOF, and Laser Remelt Methods

P.T. Nielsen; T. Mathiesen; S.E. Nielsen

ITSC 2013; 85-90https://doi.org/10.31399/asm.cp.itsc2013p0085

View Articletitled, Corrosion Properties of Selected Coatings Produced by Atmospheric Plasma Spraying, HVOF, and Laser Remelt Methods

Macroporous Titanium Coatings by Thermal Plasma Spray

P. Robotti; A. Sabbioni; L. Glass; B. George

ITSC 2013; 91-96https://doi.org/10.31399/asm.cp.itsc2013p0091

View Articletitled, Macroporous Titanium Coatings by Thermal Plasma Spray

High Performance Arc Sprayed Coatings for Active Corrosion Protection in Offshore Applications

Werner Kroemmer

ITSC 2013; 97-102https://doi.org/10.31399/asm.cp.itsc2013p0097

View Articletitled, High Performance Arc Sprayed Coatings for Active Corrosion Protection in Offshore Applications

Fabrication of Wire Mesh Heat Exchangers for Waste Heat Recovery Using Wire-Arc Spraying

R. Rezaey; S. Salavati; L. Pershin; T. Coyle; S. Chandra; J. Mostaghimi

ITSC 2013; 103-108https://doi.org/10.31399/asm.cp.itsc2013p0103

View Articletitled, Fabrication of Wire Mesh Heat Exchangers for Waste Heat Recovery Using Wire-Arc Spraying

The Definition of Power in Plasma Spraying: Kilowatts or Powder Melting Capacity?

J. Colmenares-Angulo; O. Sabouni; C. Ibanez

ITSC 2013; 109-112https://doi.org/10.31399/asm.cp.itsc2013p0109

View Articletitled, The Definition of Power in Plasma Spraying: Kilowatts or Powder Melting Capacity?

Superhydrophobicity and Water Repelling Characteristics of Thermally Sprayed Coatings

N. Sharifi; F. Ben Ettouil; M. Mousavi; M. Pugh; A. Dolatabadi; C. Moreau

ITSC 2013; 113-119https://doi.org/10.31399/asm.cp.itsc2013p0113

View Articletitled, Superhydrophobicity and Water Repelling Characteristics of Thermally Sprayed Coatings

High Temperature Oxidation Behavior of a Novel Ni-20Cr Alloy Powder Coating on T22 Steel

Manoj Kumar; Harpreet Singh; Narinder Singh

ITSC 2013; 120-125https://doi.org/10.31399/asm.cp.itsc2013p0120

View Articletitled, High Temperature Oxidation Behavior of a Novel Ni-20Cr Alloy Powder Coating on T22 Steel

Cold Spray

Corrosion Protection of a 5xxx Series Aluminum Alloy by Cold Spray Process

K. Sridharan; B. Maier; B. Hauch; D. Devan

ITSC 2013; 126-131https://doi.org/10.31399/asm.cp.itsc2013p0126

View Articletitled, Corrosion Protection of a 5xxx Series Aluminum Alloy by Cold Spray Process

Characterization of Cold-Sprayed Copper Coatings with New Evaluation Parameter of EBSD Method

Yusuke Watanabe; Yuji Ichikawa; Isamu Nonaka; Hideo Miura

ITSC 2013; 132-137https://doi.org/10.31399/asm.cp.itsc2013p0132

View Articletitled, Characterization of Cold-Sprayed Copper Coatings with New Evaluation Parameter of EBSD Method

Comparison of the Mechanical and Electrochemical Properties of WC-25Co Coatings Obtained by High-Velocity Oxyfuel and Cold Gas Spraying onto Al7075-T6

M. Couto; S. Dosta; J. Fernández; J.M. Guilemany

ITSC 2013; 138-142https://doi.org/10.31399/asm.cp.itsc2013p0138

View Articletitled, Comparison of the Mechanical and Electrochemical Properties of WC-25Co Coatings Obtained by High-Velocity Oxyfuel and Cold Gas Spraying onto Al7075-T6

Effects of Spark Plasma Sintering Treatment for Cold-Sprayed Metallic Coatings

K. Ito; K. Ogawa

ITSC 2013; 143-148https://doi.org/10.31399/asm.cp.itsc2013p0143

View Articletitled, Effects of Spark Plasma Sintering Treatment for Cold-Sprayed Metallic Coatings

Investigation on Microstructural & Mechanical Properties of Cold Sprayed & P/M Processed Composites

T. Chandanayaka; F. Azarmi

ITSC 2013; 149-154https://doi.org/10.31399/asm.cp.itsc2013p0149

View Articletitled, Investigation on Microstructural & Mechanical Properties of Cold Sprayed & P/M Processed Composites

Mechanical Properties of Cold-Sprayed Ti-6Al-4V Coatings

A. List; C. Lyphout; M. Villa; F. Gärtner; T. Klassen

ITSC 2013; 155-160https://doi.org/10.31399/asm.cp.itsc2013p0155

View Articletitled, Mechanical Properties of Cold-Sprayed Ti-6Al-4V Coatings

Study on the Restoration of Aluminum Aerospace IVD Coatings Using Cold Gas Dynamic Spray

D. MacDonald; B. Jodoin; S. Gaydos; M. Pollack; J. Falkowski

ITSC 2013; 161-165https://doi.org/10.31399/asm.cp.itsc2013p0161

View Articletitled, Study on the Restoration of Aluminum Aerospace IVD Coatings Using Cold Gas Dynamic Spray

Near-Net Shape Fins for Compact Heat Exchanger Produced by Cold Spray

Y. Cormier; P. Dupuis; B. Jodoin; A. Corbeil

ITSC 2013; 166-171https://doi.org/10.31399/asm.cp.itsc2013p0166

View Articletitled, Near-Net Shape Fins for Compact Heat Exchanger Produced by Cold Spray

Comparison of Microstructures and Mechanical Properties between Thermal and Kinetic Sprayed Thick Fe Deposits on Fe-Si Alloy Sheets

Jaeick Kim; Gyuyeol Bae; Juyeon Won; Changhee Lee; Teasung Jun; Jongkyo Choi

ITSC 2013; 172-177https://doi.org/10.31399/asm.cp.itsc2013p0172

View Articletitled, Comparison of Microstructures and Mechanical Properties between Thermal and Kinetic Sprayed Thick Fe Deposits on Fe-Si Alloy Sheets

Shockwave Induced Spraying Process: Effect of Parameters on Coating Performance

M. Karimi; G.W. Rankin; B. Jodoin

ITSC 2013; 178-183https://doi.org/10.31399/asm.cp.itsc2013p0178

View Articletitled, Shockwave Induced Spraying Process: Effect of Parameters on Coating Performance

Preparation and Characterization of TiO₂ Scattering Layer for Plastic Dye-Sensitized Solar Cells by Vacuum Cold Spray

X.-L. He; G.-J. Yang; C.-X. Li; C.-J. Li; S.-Q. Fan

ITSC 2013; 184-189https://doi.org/10.31399/asm.cp.itsc2013p0184

View Articletitled, Preparation and Characterization of TiO<sub>2</sub> Scattering Layer for Plastic Dye-Sensitized Solar Cells by Vacuum Cold Spray

Dust Explosion Properties of Aluminum, Titanium, Zinc and Iron Based Alloy Powders Used for Cold Spray

K. Sakata; K. Tagomori; N. Sugiyama; S. Sasaki; Y. Shinya; T. Nanbu; Y. Kawashita; I. Narita; H. Miyahara

ITSC 2013; 190-195https://doi.org/10.31399/asm.cp.itsc2013p0190

View Articletitled, Dust Explosion Properties of Aluminum, Titanium, Zinc and Iron Based Alloy Powders Used for Cold Spray

Design and Development of High-Pressure Warm Spray Gun

H. Katanoda; B. Sun; N. Ohno; H. Fukanuma; S. Kuroda; M. Watanabe; O. Ohashi

ITSC 2013; 196-199https://doi.org/10.31399/asm.cp.itsc2013p0196

View Articletitled, Design and Development of High-Pressure Warm Spray Gun

Mechanical Properties of Cold Sprayed Al Coatings Reinforced by Ceramics

K.H. Ko; J.O. Choi; H. Lee

ITSC 2013; 200-204https://doi.org/10.31399/asm.cp.itsc2013p0200

View Articletitled, Mechanical Properties of Cold Sprayed Al Coatings Reinforced by Ceramics

Influence of Carrier Gas Composition on Microstructures and Mechanical Properties of Cold-Sprayed Titanium Coatings

Y. Ichikawa; K. Ogawa; N. Nose; Y. Nomura; M. Takahashi; H. Amano

ITSC 2013; 205-209https://doi.org/10.31399/asm.cp.itsc2013p0205

View Articletitled, Influence of Carrier Gas Composition on Microstructures and Mechanical Properties of Cold-Sprayed Titanium Coatings

Anisotropic Mechanical Properties of Cold Sprayed Copper Coatings

Y. Watanabe; K. Atsumi; M. Yamada; M. Fukumoto

ITSC 2013; 210-214https://doi.org/10.31399/asm.cp.itsc2013p0210

View Articletitled, Anisotropic Mechanical Properties of Cold Sprayed Copper Coatings

High-Pressure Cold-Sprayed Ni and Ni-Cu Coatings - Improved Structures and Corrosion Properties

H. Koivuluoto; A. Milanti; P. Vuoristo; G. Bolelli; L. Lusvarghi

ITSC 2013; 215-220https://doi.org/10.31399/asm.cp.itsc2013p0215

View Articletitled, High-Pressure Cold-Sprayed Ni and Ni-Cu Coatings - Improved Structures and Corrosion Properties

Fundamental Cost Analysis of Cold Spray

O. Stier; AG Siemens

ITSC 2013; 221-226https://doi.org/10.31399/asm.cp.itsc2013p0221

View Articletitled, Fundamental Cost Analysis of Cold Spray

High Temperature Oxidation Behavior of Cold Sprayed Ni-Al₂O₃ Composite Coating

C.J. Huang; W.Y. Li; M. Yu; H. Liao

ITSC 2013; 227-234https://doi.org/10.31399/asm.cp.itsc2013p0227

View Articletitled, High Temperature Oxidation Behavior of Cold Sprayed Ni-Al<sub>2</sub>O<sub>3</sub> Composite Coating

Strength and Wear Properties of Stainless Steel Coatings Produced by Cold Spray with Various Powder Sizes

P. Vo; E. Irissou; S. Kudapa; M. Nestler

ITSC 2013; 235-240https://doi.org/10.31399/asm.cp.itsc2013p0235

View Articletitled, Strength and Wear Properties of Stainless Steel Coatings Produced by Cold Spray with Various Powder Sizes

Super Hard WC Cermet Coating by Low Pressure Cold Spray Based on Optimization of Powder Properties

T. Sonoda; T. Kuwashima; T. Saito; K. Sato; H. Furukawa; J. Kitamura; D. Ito

ITSC 2013; 241-245https://doi.org/10.31399/asm.cp.itsc2013p0241

View Articletitled, Super Hard WC Cermet Coating by Low Pressure Cold Spray Based on Optimization of Powder Properties

Multi-Response Optimization of Process Parameters for Low-Pressure Cold Spray Coating Process Using Taguchi and Utility Concept

Tarun Goyal; T.S. Sidhu; R.S. Walia

ITSC 2013; 246-251https://doi.org/10.31399/asm.cp.itsc2013p0246

View Articletitled, Multi-Response Optimization of Process Parameters for Low-Pressure Cold Spray Coating Process Using Taguchi and Utility Concept

Coating Performance and Durability of Zn-Based Composite Materials Prepared by Using Low-Pressure Cold Spraying

H. Koivuluoto; J. Ketola; A. Milanti; P. Vuoristo; L.-L. Descurninges; N. De Dave-Fabregue; M. Jeandin

ITSC 2013; 252-257https://doi.org/10.31399/asm.cp.itsc2013p0252

View Articletitled, Coating Performance and Durability of Zn-Based Composite Materials Prepared by Using Low-Pressure Cold Spraying

Splat Formation and Adhesion Mechanisms of Cold Gas Sprayed Al Coatings on Al₂O₃

B. Wielage; R. Drehmann; T. Grund; D. Rafaja; T. Schucknecht; K. Manygoats

ITSC 2013; 258-262https://doi.org/10.31399/asm.cp.itsc2013p0258

View Articletitled, Splat Formation and Adhesion Mechanisms of Cold Gas Sprayed Al Coatings on Al<sub>2</sub>O<sub>3</sub>

Velocity Measurement of Sprayed Particles and Coatings Fabrication of Titanium Alloys by High-Pressure Warm Spray

S. Kuroda; R.M. Molak; M. Watanabe; H. Araki; H. Katanoda; B. Sun; N. Ohno; H. Fukanuma

ITSC 2013; 263-268https://doi.org/10.31399/asm.cp.itsc2013p0263

View Articletitled, Velocity Measurement of Sprayed Particles and Coatings Fabrication of Titanium Alloys by High-Pressure Warm Spray

Analysis of Thermal History and Residual Stress in Cold Sprayed Coatings

Z. Arabgol; H. Assadi; T. Schmidt; F. Gärtner; T. Klassen

ITSC 2013; 269-274https://doi.org/10.31399/asm.cp.itsc2013p0269

View Articletitled, Analysis of Thermal History and Residual Stress in Cold Sprayed Coatings

Optional Facilities for Low Pressure Cold Spray

A. Shkodkin; A. Kashirin; O. Klyuev; T. Buzdygar

ITSC 2013; 275-278https://doi.org/10.31399/asm.cp.itsc2013p0275

View Articletitled, Optional Facilities for Low Pressure Cold Spray

The Effect of Shock-Induced Plastic Deformation on Alumina Deposition during Vacuum Kinetic Spraying

Hyungkwon Park; Fei Cao; Juhyuk Kwon; Changhee Lee

ITSC 2013; 279-291https://doi.org/10.31399/asm.cp.itsc2013p0279

View Articletitled, The Effect of Shock-Induced Plastic Deformation on Alumina Deposition during Vacuum Kinetic Spraying

Effect of Liquid Feedstock on Downstream Cold Spray Nozzle

E. Farvardin; M. Karimi; J. Villafuerte; A. Dolatabadi

ITSC 2013; 292-296https://doi.org/10.31399/asm.cp.itsc2013p0292

View Articletitled, Effect of Liquid Feedstock on Downstream Cold Spray Nozzle

Deformation and Adherence of Fe40Al Particles in Cold Gas Spraying

N. Cinca; A. List; F. Gärtner; J. Fernández; J.M. Guilemany; T. Klassen

ITSC 2013; 297-301https://doi.org/10.31399/asm.cp.itsc2013p0297

View Articletitled, Deformation and Adherence of Fe40Al Particles in Cold Gas Spraying

Electronic and Semiconductor Applications

Microstructure Influence on Electromagnetic Properties of Thermal Sprayed Ferromagnetic Composites

E. Brousse-Pereira; J. Neige; S. Pereira; K. Wittmann-Teneze; A.L. Adenot-Engelvin; L. Bianchi

ITSC 2013; 302-306https://doi.org/10.31399/asm.cp.itsc2013p0302

View Articletitled, Microstructure Influence on Electromagnetic Properties of Thermal Sprayed Ferromagnetic Composites

Dense and High Purity Yttria Coatings by APS with a New Yttria Powder

A. Allimant; D. Billières; H. Wallar

ITSC 2013; 307-311https://doi.org/10.31399/asm.cp.itsc2013p0307

View Articletitled, Dense and High Purity Yttria Coatings by APS with a New Yttria Powder

Comparable Study of Electrical and Mechanical Properties in Plasma Sprayed Alumina Coatings

T. Tosaki; Y. Kobayashi; K. Ohta; J. Kitamura

ITSC 2013; 312-317https://doi.org/10.31399/asm.cp.itsc2013p0312

View Articletitled, Comparable Study of Electrical and Mechanical Properties in Plasma Sprayed Alumina Coatings

Multi-Scale Analysis between Microstructure and Absorbing Performance of Thermal Sprayed Fe-(β-SiC/SiO₂) Coatings

Xiaojing Yuan; Bailin Zha; Hangong Wang

ITSC 2013; 318-328https://doi.org/10.31399/asm.cp.itsc2013p0318

View Articletitled, Multi-Scale Analysis between Microstructure and Absorbing Performance of Thermal Sprayed Fe-(β-SiC/SiO<sub>2</sub>) Coatings

Manufacturing and Processing

A Coupled Model between Robot Trajectories and Thermal History of the Workpiece during Thermal Spray Operation

R. Bolot; S. Deng; Z. Cai; H. Liao; G. Montavon

ITSC 2013; 329-334https://doi.org/10.31399/asm.cp.itsc2013p0329

View Articletitled, A Coupled Model between Robot Trajectories and Thermal History of the Workpiece during Thermal Spray Operation

High Productivity PS-PVD Process

A. Barth; M. Gindrat; S. Usai

ITSC 2013; 335-338https://doi.org/10.31399/asm.cp.itsc2013p0335

View Articletitled, High Productivity PS-PVD Process

Influence of Surface Contamination on the Adhesion Strength of HVOF Coatings

J. Barr; C. Estrada; B. White

ITSC 2013; 339-344https://doi.org/10.31399/asm.cp.itsc2013p0339

View Articletitled, Influence of Surface Contamination on the Adhesion Strength of HVOF Coatings

Development of High Density Twin Wire Arc Sprayed Coatings on Metallic Foam Substrates

S. Salavati; R. Rezaey; L. Pershin; T.W. Coyle; J. Mostaghimi

ITSC 2013; 345-350https://doi.org/10.31399/asm.cp.itsc2013p0345

View Articletitled, Development of High Density Twin Wire Arc Sprayed Coatings on Metallic Foam Substrates

Research and Development

Development and Characterization of B₄C Reinforced Detonation Sprayed Al Coatings

W. Tillmann; P.S. Hollingsworth; G. Fischer; J. Nellesen

ITSC 2013; 351-356https://doi.org/10.31399/asm.cp.itsc2013p0351

View Articletitled, Development and Characterization of B<sub>4</sub>C Reinforced Detonation Sprayed Al Coatings

Sliding Wear Behavior and Wear Effects of HVOF Sprayed Coatings Derived from Conventional, Fine and Nanostructured WC-12Co Powders

W. Tillmann; I. Baumann; P. Hollingsworth; L. Hagen

ITSC 2013; 357-364https://doi.org/10.31399/asm.cp.itsc2013p0357

View Articletitled, Sliding Wear Behavior and Wear Effects of HVOF Sprayed Coatings Derived from Conventional, Fine and Nanostructured WC-12Co Powders

Depicting the Behavior of a Mono-Cathode Plasma Spray Torch with an Emulator

T. Liu; S. Deng; M.-P. Planche; G. Montavon

ITSC 2013; 365-376https://doi.org/10.31399/asm.cp.itsc2013p0365

View Articletitled, Depicting the Behavior of a Mono-Cathode Plasma Spray Torch with an Emulator

Infiltration Bonding of a Hot Isostatic Press Clad Aluminum Layer to Plasma Sprayed Zirconium Coatings

K. Hollis; P. Dickerson

ITSC 2013; 377-382https://doi.org/10.31399/asm.cp.itsc2013p0377

View Articletitled, Infiltration Bonding of a Hot Isostatic Press Clad Aluminum Layer to Plasma Sprayed Zirconium Coatings

Investigation of a Pulsed Current Wire Arc Spray Process

S. Kirner; J. Schein; G. Forster

ITSC 2013; 383-388https://doi.org/10.31399/asm.cp.itsc2013p0383

View Articletitled, Investigation of a Pulsed Current Wire Arc Spray Process

Investigation and Characterization of HVAF WC-Co-Cr Coatings and Comparison to Galvanic Hard Chrome Coatings

K. Bobzin; N. Kopp; T. Warda; M. Schäfer; A. Verstak

ITSC 2013; 389-394https://doi.org/10.31399/asm.cp.itsc2013p0389

View Articletitled, Investigation and Characterization of HVAF WC-Co-Cr Coatings and Comparison to Galvanic Hard Chrome Coatings

Behavior of Ceramic Thermal Spray Coatings under Plasma Exposure

H. Yokota; M. Inaba

ITSC 2013; 395-399https://doi.org/10.31399/asm.cp.itsc2013p0395

View Articletitled, Behavior of Ceramic Thermal Spray Coatings under Plasma Exposure

A Numerical Investigation: Influence of the Operating Gas on the Flow Characteristics of a Three-Cathode Air Plasma Spraying System

K. Bobzin; N. Kopp; T. Warda; M. Schäfer; M. Öte

ITSC 2013; 400-405https://doi.org/10.31399/asm.cp.itsc2013p0400

View Articletitled, A Numerical Investigation: Influence of the Operating Gas on the Flow Characteristics of a Three-Cathode Air Plasma Spraying System

Microscopic Characteristics and Mechanical Properties of Plasma Sprayed Al₂O₃ Coatings

T. Sakoda; M. Inaba; K. Taguchi

ITSC 2013; 406-411https://doi.org/10.31399/asm.cp.itsc2013p0406

View Articletitled, Microscopic Characteristics and Mechanical Properties of Plasma Sprayed Al<sub>2</sub>O<sub>3</sub> Coatings

TEM Characterization of the Coating-Substrate Interface in Vacuum Cold-Sprayed Nano-TiO₂ Coating

Hai-Long Yao; Guan-Jun Yang; Xue-Long He; Cheng-Xin Li; Chang-Jiu Li

ITSC 2013; 412-417https://doi.org/10.31399/asm.cp.itsc2013p0412

View Articletitled, TEM Characterization of the Coating-Substrate Interface in Vacuum Cold-Sprayed Nano-TiO<sub>2</sub> Coating

Analysis of Liquid Feedstock Behavior in High Velocity Suspension Flame Spraying for the Development of Nanostructured Coatings

Ebrahim Gozali; Spyros Kamnis; Sai Gu

ITSC 2013; 418-423https://doi.org/10.31399/asm.cp.itsc2013p0418

View Articletitled, Analysis of Liquid Feedstock Behavior in High Velocity Suspension Flame Spraying for the Development of Nanostructured Coatings

Wear Performance of Thermally Sprayed and Welded Coatings Using Conventional and Nanostructured Materials

C.R.C. Lima; B.V. Bette; F. Camargo; H.C. Fals; V.A. Ferraresi

ITSC 2013; 424-428https://doi.org/10.31399/asm.cp.itsc2013p0424

View Articletitled, Wear Performance of Thermally Sprayed and Welded Coatings Using Conventional and Nanostructured Materials

Fabrication of Dense Ceramic Coatings by Using HVOF Spraying

Jin-Hong Kim; Byeong-Geun Seong; Hyung-Jun Kim

ITSC 2013; 429-432https://doi.org/10.31399/asm.cp.itsc2013p0429

View Articletitled, Fabrication of Dense Ceramic Coatings by Using HVOF Spraying

Development of Low Power Plasma Spray Process Using Atmospheric Pressure Microwave Plasma

T. Yasui; A. Redza; M. Fukumoto

ITSC 2013; 433-436https://doi.org/10.31399/asm.cp.itsc2013p0433

View Articletitled, Development of Low Power Plasma Spray Process Using Atmospheric Pressure Microwave Plasma

Characterization of the Flow Regimes in the Jet Spray for Different Twin-Wire Arc Spraying Nozzles by Adapting the Background Oriented Schlieren Technique

W. Tillmann; A. Mohamed; A. Nassir; L. Hagen; H.G. Rademacher

ITSC 2013; 437-450https://doi.org/10.31399/asm.cp.itsc2013p0437

View Articletitled, Characterization of the Flow Regimes in the Jet Spray for Different Twin-Wire Arc Spraying Nozzles by Adapting the Background Oriented Schlieren Technique

Current Activities for Standardization on Indentation Method to Evaluate Adhesion Strength of Thermal Spray Coatings in Japan

Y. Yamazaki; M. Suzuki; M. Arai; Y. Miyashita; H. Waki

ITSC 2013; 451-456https://doi.org/10.31399/asm.cp.itsc2013p0451

View Articletitled, Current Activities for Standardization on Indentation Method to Evaluate Adhesion Strength of Thermal Spray Coatings in Japan

Friction Evolution of WC-CoCr Thermally Sprayed Coatings during Dry Sliding in Different Environments

J.A. Wesmann; R. Johnsen; N. Espallargas; J. Herland; D. Twist

ITSC 2013; 457-459https://doi.org/10.31399/asm.cp.itsc2013p0457

View Articletitled, Friction Evolution of WC-CoCr Thermally Sprayed Coatings during Dry Sliding in Different Environments

Nucleation and Growth Transformations in Vacuum Plasma Sprayed Ti-6Al-4V Alloy

H.R. Salimijazi; Z.A. Mousavi; M.A. Golozar; J. Mostaghimi; T. Coyle

ITSC 2013; 460-464https://doi.org/10.31399/asm.cp.itsc2013p0460

View Articletitled, Nucleation and Growth Transformations in Vacuum Plasma Sprayed Ti-6Al-4V Alloy

Structure and Properties of HVOF and Plasma Sprayed Ceramic Alumina-Chromia Coatings Deposited from Fused and Crushed Powders

P. Vuoristo; K. Niemi; V. Matikainen; L. Hyvärinen; H. Koivuluoto; L.-M. Berger; S. Scheitz; I. Shakhverdova

ITSC 2013; 465-470https://doi.org/10.31399/asm.cp.itsc2013p0465

View Articletitled, Structure and Properties of HVOF and Plasma Sprayed Ceramic Alumina-Chromia Coatings Deposited from Fused and Crushed Powders

Suspension and Solution Plasma Spray

Structural Modifications on Material Surfaces by Thermal Nanoparticle Spraying and Microline Patterning

S. Kirihara

ITSC 2013; 471-474https://doi.org/10.31399/asm.cp.itsc2013p0471

View Articletitled, Structural Modifications on Material Surfaces by Thermal Nanoparticle Spraying and Microline Patterning

Electro-Catalytically Active Porous Nickel-Based Electrode Coatings Formed by Atmospheric and by Suspension Plasma Spraying

M. Aghasibeig; M. Mousavi; F. Ben Ettouill; R. Wuthrich; A. Dolatabadi; C. Moreau

ITSC 2013; 475-480https://doi.org/10.31399/asm.cp.itsc2013p0475

View Articletitled, Electro-Catalytically Active Porous Nickel-Based Electrode Coatings Formed by Atmospheric and by Suspension Plasma Spraying

A Numerical Study of Suspension Injection in Plasma Spraying Process

F. Jabbari; M. Jadidi; R. Wuthrich; A. Dolatabadi

ITSC 2013; 481-486https://doi.org/10.31399/asm.cp.itsc2013p0481

View Articletitled, A Numerical Study of Suspension Injection in Plasma Spraying Process

Surface Engineering

3D Wear Analysis of Thermal Spray Coatings

W. Tillmann; W. Luo; U. Selvadurai

ITSC 2013; 487-492https://doi.org/10.31399/asm.cp.itsc2013p0487

View Articletitled, 3D Wear Analysis of Thermal Spray Coatings

Plasma Spray-Physical Vapor Deposition of La_1-xSr_xCo_yFe_1-yO_3-δ Thin Film Oxygen Transport Membrane on Porous Metallic Supports

M.O. Jarligo; G. Mauer; M. Bram; S. Baumann; R. Vaßen

ITSC 2013; 493-498https://doi.org/10.31399/asm.cp.itsc2013p0493

View Articletitled, Plasma Spray-Physical Vapor Deposition of La<sub>1-<em>x</em></sub>Sr<em><sub>x</sub></em>Co<em><sub>y</sub></em>Fe<sub>1-<em>y</em></sub>O<sub>3-δ</sub> Thin Film Oxygen Transport Membrane on Porous Metallic Supports

Influence of Surface Pre-Treatment on Aluminum Alloy Mechanical Behavior

A. Lamraoui; S. Costil; C. Langlade

ITSC 2013; 499-505https://doi.org/10.31399/asm.cp.itsc2013p0499

View Articletitled, Influence of Surface Pre-Treatment on Aluminum Alloy Mechanical Behavior

Tungsten Carbide Deposition Processes for Hard Chrome Alternative: Preliminary Study of HVAF vs. HVOF Thermal Spray Processes

C. Lyphout; J. Kitamura; K. Sato; J. Yamada; S. Dizdar

ITSC 2013; 506-511https://doi.org/10.31399/asm.cp.itsc2013p0506

View Articletitled, Tungsten Carbide Deposition Processes for Hard Chrome Alternative: Preliminary Study of HVAF vs. HVOF Thermal Spray Processes

Microstructure and Mechanical Properties of Plasma Sprayed Nanostructured and Conventional Al₂O₃-13TiO₂ Coatings

Wojciech Żórawski; Anna Góral; Otakar Bokuvka; Katarzyna Berent

ITSC 2013; 512-515https://doi.org/10.31399/asm.cp.itsc2013p0512

View Articletitled, Microstructure and Mechanical Properties of Plasma Sprayed Nanostructured and Conventional Al<sub>2</sub>O<sub>3</sub>-13TiO<sub>2</sub> Coatings

Adhesion/Cohesion Strength of Plasma Sprayed Ceramic Coatings by Scratch Testing On Cross-Section

Eungsun Byon; Soo-Wohn Lee; Junya Kitamura; Kenneth Holmberg

ITSC 2013; 516-519https://doi.org/10.31399/asm.cp.itsc2013p0516

View Articletitled, Adhesion/Cohesion Strength of Plasma Sprayed Ceramic Coatings by Scratch Testing On Cross-Section

Biofilm Formation and Evaluation for Spray Coated Metal Films on Laboratory Scale

H. Kanematsu; T. Kogo; D. Kuroda; H. Itoh; S. Kirihara

ITSC 2013; 520-525https://doi.org/10.31399/asm.cp.itsc2013p0520

View Articletitled, Biofilm Formation and Evaluation for Spray Coated Metal Films on Laboratory Scale

The Effect of CFRP Surface Treatment on the Splat Morphology and Coating Adhesion Strength

Amirthan Ganesan; Mohammed Shahien; Motohiro Yamada; Masahiro Fukumoto

ITSC 2013; 526-531https://doi.org/10.31399/asm.cp.itsc2013p0526

View Articletitled, The Effect of CFRP Surface Treatment on the Splat Morphology and Coating Adhesion Strength

External Powder Injection in Twin Wire Arc Spraying to Control the Coating Composition

W. Tillmann; M. Abdulgader; L. Hagen

ITSC 2013; 532-537https://doi.org/10.31399/asm.cp.itsc2013p0532

View Articletitled, External Powder Injection in Twin Wire Arc Spraying to Control the Coating Composition

Surface Hardening of HVOF Sprayed Stainless Steel Coatings by Plasma Nitriding and Nitrocarburizing

Gayoung Park; Gyuyeol Bae; Changhee Lee

ITSC 2013; 538-542https://doi.org/10.31399/asm.cp.itsc2013p0538

View Articletitled, Surface Hardening of HVOF Sprayed Stainless Steel Coatings by Plasma Nitriding and Nitrocarburizing

Abrasive Wear Resistance of Thermal Surfacing Materials for Soil Tillage Applications

Senad Dizdar; Barbara Maroli

ITSC 2013; 543-549https://doi.org/10.31399/asm.cp.itsc2013p0543

View Articletitled, Abrasive Wear Resistance of Thermal Surfacing Materials for Soil Tillage Applications

Abrasion Wear and Corrosion Resistance in Chlorine Containing Conditions of Iron Based Thermal Spray Coatings

J. Laurila; A. Milanti; K. Niemi; P. Vuoristo

ITSC 2013; 550-556https://doi.org/10.31399/asm.cp.itsc2013p0550

View Articletitled, Abrasion Wear and Corrosion Resistance in Chlorine Containing Conditions of Iron Based Thermal Spray Coatings

Turbine Coatings

Impact of Impurity Content on the Sintering Resistance of Dysprosia and Yttria Stabilized Zirconia Thermal Barrier Coatings

N. Curry; Wyszomir Janikowski; N. Markocsan

ITSC 2013; 557-563https://doi.org/10.31399/asm.cp.itsc2013p0557

View Articletitled, Impact of Impurity Content on the Sintering Resistance of Dysprosia and Yttria Stabilized Zirconia Thermal Barrier Coatings

Increasing Durability of a Multilayer Oxidation Protection System for Gamma-TiAl

K. Bobzin; N. Kopp; T. Warda; T.F. Linke

ITSC 2013; 564-569https://doi.org/10.31399/asm.cp.itsc2013p0564

View Articletitled, Increasing Durability of a Multilayer Oxidation Protection System for Gamma-TiAl

MCrAlY Bondcoats by High Velocity Atmospheric Plasma Spraying

G. Mauer; D. Sebold; R. Vaßen

ITSC 2013; 570-576https://doi.org/10.31399/asm.cp.itsc2013p0570

View Articletitled, MCrAlY Bondcoats by High Velocity Atmospheric Plasma Spraying

Effect of Plasma Spray Parameters on Thermal Barrier Coating Formation and Microstructural Properties

M.L. Sesso; C.C. Berndt; Y.C. Wong

ITSC 2013; 577-582https://doi.org/10.31399/asm.cp.itsc2013p0577

View Articletitled, Effect of Plasma Spray Parameters on Thermal Barrier Coating Formation and Microstructural Properties

Improved Thermal Cycling Durability of Thermal Barrier Coatings Manufactured by PS-PVD

S. Rezanka; G. Mauer; R. Vaßen

ITSC 2013; 583-589https://doi.org/10.31399/asm.cp.itsc2013p0583

View Articletitled, Improved Thermal Cycling Durability of Thermal Barrier Coatings Manufactured by PS-PVD

Comparison Study of Three or Two Dimensional Analytical Model for Simulation of Thermal Conductivity in Thermally Sprayed Ceramic Coatings

G.-J. Yang; Y.-C. Xie; H. Xie; C.-X. Li; C.-J. Li

ITSC 2013; 590-595https://doi.org/10.31399/asm.cp.itsc2013p0590

View Articletitled, Comparison Study of Three or Two Dimensional Analytical Model for Simulation of Thermal Conductivity in Thermally Sprayed Ceramic Coatings

Influence of Topcoat-Bondcoat Interface Roughness on Stresses and Lifetime in Thermal Barrier Coatings

M. Gupta; K. Skogsberg; P. Nylén

ITSC 2013; 596-601https://doi.org/10.31399/asm.cp.itsc2013p0596

View Articletitled, Influence of Topcoat-Bondcoat Interface Roughness on Stresses and Lifetime in Thermal Barrier Coatings

Tribological Characterization of Plasma Sprayed CoNiCrAlY-BN Abradable Coatings

E. Irissou; A. Dadouche; R.S. Lima

ITSC 2013; 602-607https://doi.org/10.31399/asm.cp.itsc2013p0602

View Articletitled, Tribological Characterization of Plasma Sprayed CoNiCrAlY-BN Abradable Coatings

Controlling YSZ Abradable Erosion Performance by Optimizing Spray Parameters

A. Hawkins; R. Wellman; M. Craig; J.R. Nicholls; K. Laul; R. Shankar

ITSC 2013; 608-619https://doi.org/10.31399/asm.cp.itsc2013p0608

View Articletitled, Controlling YSZ Abradable Erosion Performance by Optimizing Spray Parameters

Poster Session

New Method for Carbon Nanofibers-Metal Powder Formation and Their Use in Thermal Spray Coatings

D.R. Vidal; I.G. Cano; J. Fernández; J.M. Guilemany

ITSC 2013; 620-625https://doi.org/10.31399/asm.cp.itsc2013p0620

View Articletitled, New Method for Carbon Nanofibers-Metal Powder Formation and Their Use in Thermal Spray Coatings

A Study on the Metal EDTA Complexes Thermal Spray

Yu Li; Masahiro Noguchi; Hiroki Akasaka; Atsushi Nakamura; Hidetoshi Saitoh

ITSC 2013; 626-630https://doi.org/10.31399/asm.cp.itsc2013p0626

View Articletitled, A Study on the Metal EDTA Complexes Thermal Spray

Friction Coefficient Improvement of Cold Sprayed Al-Al₂O₃ Coatings

K.H. Ko; J.O. Choi; H. Lee

ITSC 2013; 631-635https://doi.org/10.31399/asm.cp.itsc2013p0631

View Articletitled, Friction Coefficient Improvement of Cold Sprayed Al-Al<sub>2</sub>O<sub>3</sub> Coatings

Formation Mechanism of Fe-Al₂O₃-FeAl₂O₄ and FeAl Coatings by Reactive Plasma Spraying under Atmosphere and Low Pressure Conditions

L. Zhu; R. Bolot; H. Liao; C. Coddet; N. Zhang; Q. Zhao

ITSC 2013; 636-641https://doi.org/10.31399/asm.cp.itsc2013p0636

View Articletitled, Formation Mechanism of Fe-Al<sub>2</sub>O<sub>3</sub>-FeAl<sub>2</sub>O<sub>4</sub> and FeAl Coatings by Reactive Plasma Spraying under Atmosphere and Low Pressure Conditions

Numerical Simulation of Heat Transfer in Thermal Spray-Formed Metal Foam Heat Exchangers

M. Taheri; S. Chandra; J. Mostaghimi

ITSC 2013; 642-647https://doi.org/10.31399/asm.cp.itsc2013p0642

View Articletitled, Numerical Simulation of Heat Transfer in Thermal Spray-Formed Metal Foam Heat Exchangers

Modeling the Influence of Solution Properties on Precipitations of Vaporizing Droplets in Plasma Gases

L.S. Xu; Y.G. Shan

ITSC 2013; 648-653https://doi.org/10.31399/asm.cp.itsc2013p0648

View Articletitled, Modeling the Influence of Solution Properties on Precipitations of Vaporizing Droplets in Plasma Gases

Numerical Simulation of Gas Dynamics and Particle Behavior in Low-Temperature Oxygen Fuel Spray Process

C.H. Shen; Y.G. Shan; L.B. Jia

ITSC 2013; 654-659https://doi.org/10.31399/asm.cp.itsc2013p0654

View Articletitled, Numerical Simulation of Gas Dynamics and Particle Behavior in Low-Temperature Oxygen Fuel Spray Process

Effect of Substrate Hardness and Spray Angle on the Deposition Behavior of Cold Sprayed Ti Particles

S. Yin; X.K. Suo; H.L. Liao; X.F. Wang; W.Y. Li

ITSC 2013; 660-665https://doi.org/10.31399/asm.cp.itsc2013p0660

View Articletitled, Effect of Substrate Hardness and Spray Angle on the Deposition Behavior of Cold Sprayed Ti Particles

Microstructure and Magnetic Properties of Atmospheric Plasma Sprayed Fe-40Al Coatings Obtained from Nanostructured Powders

B. Song; S.-J. Dong; N.-E. Fenineche; H.-L. Liao; C. Coddet; T. Grosdidier

ITSC 2013; 666-671https://doi.org/10.31399/asm.cp.itsc2013p0666

View Articletitled, Microstructure and Magnetic Properties of Atmospheric Plasma Sprayed Fe-40Al Coatings Obtained from Nanostructured Powders

Parameter Optimization of Dry-Ice Blasting during Plasma Spraying Process by Characterizing CoNiCrAlY Coatings

S.-J. Dong; B. Song; H.-L. Liao; C. Coddet; B. Hansz

ITSC 2013; 672-676https://doi.org/10.31399/asm.cp.itsc2013p0672

View Articletitled, Parameter Optimization of Dry-Ice Blasting during Plasma Spraying Process by Characterizing CoNiCrAlY Coatings

Characterization of WC Particle-Reinforced In-Situ FeAl Intermetallic Matrix Composite Coating by Cold Spraying

H.-T. Wang; G.-C. Ji; R.-Y. Wang

ITSC 2013; 677-683https://doi.org/10.31399/asm.cp.itsc2013p0677

View Articletitled, Characterization of WC Particle-Reinforced In-Situ FeAl Intermetallic Matrix Composite Coating by Cold Spraying

Effect of Ceramic Content on the Microstructure and Wear Behavior of Al/SiC Composite Coatings by Cold Spraying

H.-T. Wang; G.-C. Ji; R.-Y. Wang

ITSC 2013; 684-689https://doi.org/10.31399/asm.cp.itsc2013p0684

View Articletitled, Effect of Ceramic Content on the Microstructure and Wear Behavior of Al/SiC Composite Coatings by Cold Spraying

Deposition Behaviors of Fe-Based Amorphous Materials in Vacuum Kinetic Spraying Process

Juhyuk Kwon; Hyungkwon Park; Changhee Lee

ITSC 2013; 690-694https://doi.org/10.31399/asm.cp.itsc2013p0690

View Articletitled, Deposition Behaviors of Fe-Based Amorphous Materials in Vacuum Kinetic Spraying Process

Effect of SiC Particle Size and Volume Fraction on the Microstructure and Properties of Cold-Sprayed AZ91D-SiC Composite Coatings

X.-K. Suo; M. Yu; M.-P. Planche; H.-L. Liao; Q.-L. Suo

ITSC 2013; 695-700https://doi.org/10.31399/asm.cp.itsc2013p0695

View Articletitled, Effect of SiC Particle Size and Volume Fraction on the Microstructure and Properties of Cold-Sprayed AZ91D-SiC Composite Coatings

Prediction of Critical Velocity during Cold Spraying Based on a Coupled Thermomechanical Eulerian Model

F.F. Wang; W.Y. Li; C.J. Huang; M. Yu; H.L. Liao

ITSC 2013; 701-706https://doi.org/10.31399/asm.cp.itsc2013p0701

View Articletitled, Prediction of Critical Velocity during Cold Spraying Based on a Coupled Thermomechanical Eulerian Model

Influence of the Substrate’s Shape Complexity on the Coating Properties Produced by HVOF Spraying of Fine WC-12Co (2-10 µm) Powders

W. Tillmann; P. Hollingsworth; I. Baumann; S. Flossbach; H. Müller; T. Wiederkehr

ITSC 2013; 707-711https://doi.org/10.31399/asm.cp.itsc2013p0707

View Articletitled, Influence of the Substrate’s Shape Complexity on the Coating Properties Produced by HVOF Spraying of Fine WC-12Co (2-10 µm) Powders

Wear Resistant Coatings on Ball Valves for Coal-Slurry Pipelines

L. Pershin; J. Mostaghimi; Afshin Maknoni; Y.S. Ma; Q. Gao; Z.D. Chang; H.B. Liu; Q.M. Wu

ITSC 2013; 712-716https://doi.org/10.31399/asm.cp.itsc2013p0712

View Articletitled, Wear Resistant Coatings on Ball Valves for Coal-Slurry Pipelines

Computational Simulation for Gas Heater of Cold Spray System

Huang Guosheng; Gu Daming; Li Xiangbo; Xing Lukuo

ITSC 2013; 717-722https://doi.org/10.31399/asm.cp.itsc2013p0717

View Articletitled, Computational Simulation for Gas Heater of Cold Spray System

Volume Information

Organizing Committees

ITSC 2013; iiihttps://doi.org/10.31399/asm.cp.itsc2013fm01

View Articletitled, Organizing Committees