Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2010: Proceedings from the International Thermal Spray Conference

Cold Spray

New Industrial Applications for Cold Spraying

S. Hartmann

ITSC 2010; 1-3https://doi.org/10.31399/asm.cp.itsc2010p0001

View Articletitled, New Industrial Applications for Cold Spraying

Transmission Electron Microscopy of Cold Sprayed Titanium

P.C. King; M. Jahedi

ITSC 2010; 4-9https://doi.org/10.31399/asm.cp.itsc2010p0004

View Articletitled, Transmission Electron Microscopy of Cold Sprayed Titanium

Microstructure and Mechanical Properties of Cold Spray Titanium Coatings

S. Gulizia; A. Trentin; S. Vezzù; S. Rech; P. King; M. Jahedi; M. Guagliano

ITSC 2010; 80-83https://doi.org/10.31399/asm.cp.itsc2010p0080

View Articletitled, Microstructure and Mechanical Properties of Cold Spray Titanium Coatings

Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings

W. Wong; E. Irissou; J.-G. Legoux; S. Yue

ITSC 2010; 84-89https://doi.org/10.31399/asm.cp.itsc2010p0084

View Articletitled, Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings

Layer Formation of Cold-Sprayed Ceramic Titanium Dioxide Layers on Metal Surfaces

J.-O. Kliemann; H. Gutzmann; F. Gärtner; T. Klassen; I. Jursic; C. Borchers

ITSC 2010; 90-95https://doi.org/10.31399/asm.cp.itsc2010p0090

View Articletitled, Layer Formation of Cold-Sprayed Ceramic Titanium Dioxide Layers on Metal Surfaces

Portable High Pressure Cold Spray Process – Equipment, Coatings and Applications

J. Karthikeyan; C. M. Kay; H. Hoell

ITSC 2010; 243-246https://doi.org/10.31399/asm.cp.itsc2010p0243

View Articletitled, Portable High Pressure Cold Spray Process – Equipment, Coatings and Applications

Potential of Cold Gas Spraying in Power Electronic Applications

K.-R. Donner; F. Gaertner; T. Klassen

ITSC 2010; 247-252https://doi.org/10.31399/asm.cp.itsc2010p0247

View Articletitled, Potential of Cold Gas Spraying in Power Electronic Applications

Study of the Influence of Pre-Heated Al6061 Substrate Temperature on Al Coatings Deposited by Cold Spray

S. Rech; A. Trentin; S. Vezzù; J.-G. Legoux; E. Irissou; M. Guagliano

ITSC 2010; 253-258https://doi.org/10.31399/asm.cp.itsc2010p0253

View Articletitled, Study of the Influence of Pre-Heated Al6061 Substrate Temperature on Al Coatings Deposited by Cold Spray

Effects of Nanosize Particles on the Intermetallic Compound Formations of Cold Sprayed Coatings

H. Lee; J.O. Choi; K.H. Ko

ITSC 2010; 476-481https://doi.org/10.31399/asm.cp.itsc2010p0476

View Articletitled, Effects of Nanosize Particles on the Intermetallic Compound Formations of Cold Sprayed Coatings

Characterisation of Corrosion Resistant Deposits by Cold Gas Dynamic Spray

T. Marrocco; D. Harvey; T. Hussain

ITSC 2010; 482-486https://doi.org/10.31399/asm.cp.itsc2010p0482

View Articletitled, Characterisation of Corrosion Resistant Deposits by Cold Gas Dynamic Spray

Comparison of Cold Spray and Detonation Coatings Properties

I. Smurov; D. Pervushin; V. Ulianitsky; S. Zlobin; A. Sova

ITSC 2010; 487-490https://doi.org/10.31399/asm.cp.itsc2010p0487

View Articletitled, Comparison of Cold Spray and Detonation Coatings Properties

Effect of Surface Morphology of MCrAlY Bond Coats on the Isothermal Oxidation Behavior

Y. Li; C.-J. Li; Q. Zhang; L.-K. Xing; G.-J. Yang

ITSC 2010; 491-497https://doi.org/10.31399/asm.cp.itsc2010p0491

View Articletitled, Effect of Surface Morphology of MCrAlY Bond Coats on the Isothermal Oxidation Behavior

Effect of The Ceramic Component on Cold Sprayed Metal Ceramic Coatings

A. Sova; V. Kosarev; A. Papyrin; I. Smurov

ITSC 2010; 548-552https://doi.org/10.31399/asm.cp.itsc2010p0548

View Articletitled, Effect of The Ceramic Component on Cold Sprayed Metal Ceramic Coatings

Investigation of Impact Behavior of Cold-Sprayed Large Annealed Copper Particles and Characterizations of Coatings

W.-Y. Li; X.P. Guo; H. L. Liao; C. Coddet

ITSC 2010; 553-559https://doi.org/10.31399/asm.cp.itsc2010p0553

View Articletitled, Investigation of Impact Behavior of Cold-Sprayed Large Annealed Copper Particles and Characterizations of Coatings

Characterization and Performance Evaluation of a Helium Recovery System Designed for Cold Spraying

J.-G. Legoux; E. Irissou; S. Desaulniers; J. Bobyn; B. Harvey; W. Wong; E. Gagnon; S. Yue

ITSC 2010; 560-565https://doi.org/10.31399/asm.cp.itsc2010p0560

View Articletitled, Characterization and Performance Evaluation of a Helium Recovery System Designed for Cold Spraying

Wear Protection

Wear Behaviour and Performance of a Cost-Effective Iron-Based, Carbide-Reinforced, Sintered Coating

M. Lugbauer; E. Badisch; A. Kröll

ITSC 2010; 10-15https://doi.org/10.31399/asm.cp.itsc2010p0010

View Articletitled, Wear Behaviour and Performance of a Cost-Effective Iron-Based, Carbide-Reinforced, Sintered Coating

Structure and Tribological Characteristics of HVOF Coatings Sprayed from Powder Blends of Cr₃C₂-25NiCr and NiCrBSi Alloy

A. Määttä; U. Kanerva; P. Vuoristo

ITSC 2010; 16-20https://doi.org/10.31399/asm.cp.itsc2010p0016

View Articletitled, Structure and Tribological Characteristics of HVOF Coatings Sprayed from Powder Blends of Cr<sub>3</sub>C<sub>2</sub>-25NiCr and NiCrBSi Alloy

Characterization of High-Temperature Abrasive Wear of Cold-Sprayed FeAl Intermetallic Compound Coating

C.-J. Li; H.-T. Wang; G.-J. King; S.-N. Zhao; C.-G. Bao

ITSC 2010; 21-27https://doi.org/10.31399/asm.cp.itsc2010p0021

View Articletitled, Characterization of High-Temperature Abrasive Wear of Cold-Sprayed FeAl Intermetallic Compound Coating

Improved Hardfacing for Drill Bits and Drilling Tools

J.A. Sue; H. Sreshta; B.H. Qiu

ITSC 2010; 314-320https://doi.org/10.31399/asm.cp.itsc2010p0314

View Articletitled, Improved Hardfacing for Drill Bits and Drilling Tools

The Influence of Particle Temperature, Particle Velocity and Coating Surface Temperature on the Sliding Wear Performance of TiO₂-Cr₂O₃ Coatings

R. Trache; L.-M. Berger; S. Saaro; R.S. Lima; B.R. Marple

ITSC 2010; 321-326https://doi.org/10.31399/asm.cp.itsc2010p0321

View Articletitled, The Influence of Particle Temperature, Particle Velocity and Coating Surface Temperature on the Sliding Wear Performance of TiO<sub>2</sub>-Cr<sub>2</sub>O<sub>3</sub> Coatings

Extension of Erosion Life of Turbine Housing for Ship by Thermal Spray

K. Sonoya; M. Nakamura; K. Ishida

ITSC 2010; 327-330https://doi.org/10.31399/asm.cp.itsc2010p0327

View Articletitled, Extension of Erosion Life of Turbine Housing for Ship by Thermal Spray

Wear Properties of Ni-Based Composite Coatings Sprayed by HVAF

C. Wu; K. Zhou; M. Liu; C.M. Deng; C.G. Deng

ITSC 2010; 331-334https://doi.org/10.31399/asm.cp.itsc2010p0331

View Articletitled, Wear Properties of Ni-Based Composite Coatings Sprayed by HVAF

Comparison of Two Structure Scales of Plasma Sprayed Al₂O₃-TiO₂ Coatings on Mechanical and Tribological Properties

F. Vargas; H. Ageorges; W. Xin; P. Fauchais; M. Lopez

ITSC 2010; 673-678https://doi.org/10.31399/asm.cp.itsc2010p0673

View Articletitled, Comparison of Two Structure Scales of Plasma Sprayed Al<sub>2</sub>O<sub>3</sub>-TiO<sub>2</sub> Coatings on Mechanical and Tribological Properties

Tribological Analysis of WC Cermet Coatings with Friction Test Under Tensile Stress Condition

K. Nomakuchi; F. Itoigawa; J. Kitamura; K. Sato

ITSC 2010; 679-684https://doi.org/10.31399/asm.cp.itsc2010p0679

View Articletitled, Tribological Analysis of WC Cermet Coatings with Friction Test Under Tensile Stress Condition

Experimental Investigation of Fretting Wear on Nitrided and Thermal Spray Coated Ti-6-4 Parts for Lift Fan Applications

P. Patil; F. Sadeghi; S. Dixit; R. Dixit; M. Chin

ITSC 2010; 685-690https://doi.org/10.31399/asm.cp.itsc2010p0685

View Articletitled, Experimental Investigation of Fretting Wear on Nitrided and Thermal Spray Coated Ti-6-4 Parts for Lift Fan Applications

Plasma Spraying

New Conventional Plasma Gun with High Performance: ProPlasma HP

A. Allimant; D. Billières

ITSC 2010; 28-32https://doi.org/10.31399/asm.cp.itsc2010p0028

View Articletitled, New Conventional Plasma Gun with High Performance: ProPlasma HP

TriplexPro-200 Gun Platform: Impacting All Operational Aspects of Thermal Spraying

D. Hawley; C. Dambra; R. Molz

ITSC 2010; 33-37https://doi.org/10.31399/asm.cp.itsc2010p0033

View Articletitled, TriplexPro-200 Gun Platform: Impacting All Operational Aspects of Thermal Spraying

Yttria Deposition by a Novel Plasma Torch

L. Pershin; J. Mostaghimi

ITSC 2010; 38-41https://doi.org/10.31399/asm.cp.itsc2010p0038

View Articletitled, Yttria Deposition by a Novel Plasma Torch

Investigation of Atmospheric Plasma Sprayed Tungsten Carbide Cobalt Coatings Using Statistical Design of Experiments

W. Tillmann; E. Vogli; B. Krebs

ITSC 2010; 42-48https://doi.org/10.31399/asm.cp.itsc2010p0042

View Articletitled, Investigation of Atmospheric Plasma Sprayed Tungsten Carbide Cobalt Coatings Using Statistical Design of Experiments

Plasma Sprayed NiCr Coatings Using a Gas Shroud System

M. F. Morks; C. C. Berndt

ITSC 2010; 49-54https://doi.org/10.31399/asm.cp.itsc2010p0049

View Articletitled, Plasma Sprayed NiCr Coatings Using a Gas Shroud System

Influence of Feedstock Powder for Fabrication of Aluminum Nitride in Reactive Atmospheric Plasma Spray Process

M. Shahien; M. Yamada; T. Yasui; M. Fukumoto

ITSC 2010; 213-218https://doi.org/10.31399/asm.cp.itsc2010p0213

View Articletitled, Influence of Feedstock Powder for Fabrication of Aluminum Nitride in Reactive Atmospheric Plasma Spray Process

Vapor Phase Deposition Using a Plasma Spray Process

K. von Niessen; M. Gindrat

ITSC 2010; 219-227https://doi.org/10.31399/asm.cp.itsc2010p0219

View Articletitled, Vapor Phase Deposition Using a Plasma Spray Process

Gas Turbines

Composite Coatings with Drag Reduction and Self-Cleaning Properties

J. Wilden; V. E. Drescher; P. Schaaf; S. Günschmann

ITSC 2010; 55-59https://doi.org/10.31399/asm.cp.itsc2010p0055

View Articletitled, Composite Coatings with Drag Reduction and Self-Cleaning Properties

Thermally Sprayed Oxidation Protection Coatings for γ-TiAl Substrates

K. Bobzin; T. Schläfer; T. Warda; M. Brühl

ITSC 2010; 60-65https://doi.org/10.31399/asm.cp.itsc2010p0060

View Articletitled, Thermally Sprayed Oxidation Protection Coatings for γ-TiAl Substrates

Relationships Between Coating Microstructure and Thermal Conductivity in Thermal Barrier Coatings – a Modelling Approach

I. Tano; M. Gupta; N. Curry; P. Nylén; J. Wigren

ITSC 2010; 66-72https://doi.org/10.31399/asm.cp.itsc2010p0066

View Articletitled, Relationships Between Coating Microstructure and Thermal Conductivity in Thermal Barrier Coatings – a Modelling Approach

Oxidation Behaviour of MCrAlY Bond Coats Manufactured by Plasma, HVOF and Cold Gas Dynamic Spraying

P. Richer; M. Yandouzi; L. Beauvais; B. Jodoin

ITSC 2010; 73-79https://doi.org/10.31399/asm.cp.itsc2010p0073

View Articletitled, Oxidation Behaviour of MCrAlY Bond Coats Manufactured by Plasma, HVOF and Cold Gas Dynamic Spraying

A Preliminary Study of the Oxidation Behavior of TBC with Cold Spray CoNiCrAlY Bond Coat

W.R. Chen; E. Irissou; J.-G. Legoux; X. Wu; B.R. Marple

ITSC 2010; 410-415https://doi.org/10.31399/asm.cp.itsc2010p0410

View Articletitled, A Preliminary Study of the Oxidation Behavior of TBC with Cold Spray CoNiCrAlY Bond Coat

Characterization of Thermo-Mechanical Properties for Thermal Sprayed NiCoCrAlY Coatings

A. Fasth; P. Nylén; N. Markocsan; R. Mušálek

ITSC 2010; 416-420https://doi.org/10.31399/asm.cp.itsc2010p0416

View Articletitled, Characterization of Thermo-Mechanical Properties for Thermal Sprayed NiCoCrAlY Coatings

Challenges for Plasma Spray Deposition of Decomposition-Prone Perovskite Coatings

M.O. Jarligo; G. Mauer; D. Mack; R. Vassen; D. Stöver

ITSC 2010; 421-425https://doi.org/10.31399/asm.cp.itsc2010p0421

View Articletitled, Challenges for Plasma Spray Deposition of Decomposition-Prone Perovskite Coatings

TBC Dry Ice Stripping

C. Giolli; B. Allegrini; T. Duda; L. Engl; A. Giorgetti; A. Groppetti; L. Lanzi; S. Pini; M. Spagnoli; A. Scrivani

ITSC 2010; 690-694https://doi.org/10.31399/asm.cp.itsc2010p0690

View Articletitled, TBC Dry Ice Stripping

Thermal Cycle Resistance of Oxidation-Resistant Metallic Coatings

S. Takahashi; M. Hatano; Y. Kojima; Y. Harada; A. Kawasaki; F. Ono

ITSC 2010; 695-700https://doi.org/10.31399/asm.cp.itsc2010p0695

View Articletitled, Thermal Cycle Resistance of Oxidation-Resistant Metallic Coatings

Next Generation Thermal Barrier Coatings for the Gas Turbine Industry

N. Curry; N. Markocsan; X.-H. Li; A. Tricoire; M. Dorfman

ITSC 2010; 701-707https://doi.org/10.31399/asm.cp.itsc2010p0701

View Articletitled, Next Generation Thermal Barrier Coatings for the Gas Turbine Industry

High Velocity Oxyfuel Thermal Spraying

HVOF Spraying of Ultrahigh Boron-High Carbon Tool Steel Coating for Wear Resistance Applications

B. Rajasekaran; G. Mauer; R. Vaßen; A. Röttger; S. Weber; W. Theisen

ITSC 2010; 96-99https://doi.org/10.31399/asm.cp.itsc2010p0096

View Articletitled, HVOF Spraying of Ultrahigh Boron-High Carbon Tool Steel Coating for Wear Resistance Applications

Computational Investigation of Warm Spray

H. Tabbara; S. Gu; G. McCartney

ITSC 2010; 100-104https://doi.org/10.31399/asm.cp.itsc2010p0100

View Articletitled, Computational Investigation of Warm Spray

Correlation of Wear Resistant Functions of HVOF and Warm Sprayed WC-Co Coatings with In-Flight Particle Characteristics

K. Sato; J. Kitamura; G. Raman; M. Watanabe; M. Komatsu; S. Kuroda

ITSC 2010; 105-107https://doi.org/10.31399/asm.cp.itsc2010p0105

View Articletitled, Correlation of Wear Resistant Functions of HVOF and Warm Sprayed WC-Co Coatings with In-Flight Particle Characteristics

Expansion of the Applicable Range of HVOF Process Conditions

A. Wank; A. Schwenk; M. Liu; K.S. Zhou; C.M. Deng; C.G. Deng

ITSC 2010; 455-460https://doi.org/10.31399/asm.cp.itsc2010p0455

View Articletitled, Expansion of the Applicable Range of HVOF Process Conditions

Relationships Between Process Parameters, Microstructure and Adhesion Strength of HVOF Sprayed IN718 Coatings

C. Lyphout; P. Nylén; L. Östergren

ITSC 2010; 461-466https://doi.org/10.31399/asm.cp.itsc2010p0461

View Articletitled, Relationships Between Process Parameters, Microstructure and Adhesion Strength of HVOF Sprayed IN718 Coatings

Development of a Low-Temperature, Oxy-Fuel (LTOF) Thermal Spray Gun

R. Dhiman; F. Farhadi; L. Pershin; S. Chandra; J. Mostaghimi

ITSC 2010; 467-471https://doi.org/10.31399/asm.cp.itsc2010p0467

View Articletitled, Development of a Low-Temperature, Oxy-Fuel (LTOF) Thermal Spray Gun

Evaluation of Boron Carbide Based Thermal Sprayed Coatings for Tribological Applications

C.R.C. Lima; M.J. Rosales; F. Camargo

ITSC 2010; 472-475https://doi.org/10.31399/asm.cp.itsc2010p0472

View Articletitled, Evaluation of Boron Carbide Based Thermal Sprayed Coatings for Tribological Applications

Power Engineering and Solid Oxide Fuel Cells

Plasma Sprayed LSCF Oxygen Electrode for SOFC

A. Ansar; D. Soysal; Z. Ilhan; N. Wagner

ITSC 2010; 108-113https://doi.org/10.31399/asm.cp.itsc2010p0108

View Articletitled, Plasma Sprayed LSCF Oxygen Electrode for SOFC

Plasma Spraying of Lanthanum Silicate Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells (ITSOFCs)

S. Dru; E. Meillot; K. Wittmann-Teneze; M.-L. Saboungi; R. Benoit

ITSC 2010; 114-119https://doi.org/10.31399/asm.cp.itsc2010p0114

View Articletitled, Plasma Spraying of Lanthanum Silicate Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells (ITSOFCs)

Microstructure of Thermal Sprayed Silicon Coatings using Various Particle Sizes and Spray Conditions

D.D. Jackson; M. Sereda; R. Gansert

ITSC 2010; 426-430https://doi.org/10.31399/asm.cp.itsc2010p0426

View Articletitled, Microstructure of Thermal Sprayed Silicon Coatings using Various Particle Sizes and Spray Conditions

Deposition of NiO/YSZ Composite and YSZ by Suspension Plasma Spray on Porous Metal

Y. Wang; J.-G. Legoux; R. Neagu; R. Hui; R. Maric; B.R. Marple

ITSC 2010; 431-438https://doi.org/10.31399/asm.cp.itsc2010p0431

View Articletitled, Deposition of NiO/YSZ Composite and YSZ by Suspension Plasma Spray on Porous Metal

Plasma Sprayed and Electrospark Deposited Zirconium Metal Diffusion Barrier Coatings

K.J. Hollis; M.I. Pena

ITSC 2010; 439-444https://doi.org/10.31399/asm.cp.itsc2010p0439

View Articletitled, Plasma Sprayed and Electrospark Deposited Zirconium Metal Diffusion Barrier Coatings

Study on Microstructure and Electrochemical Performance of Ni/YSZ Anode Deposited by APS

C.-X. Li; R.-T. Li; G.-J Yang; C.-J Li

ITSC 2010; 445-449https://doi.org/10.31399/asm.cp.itsc2010p0445

View Articletitled, Study on Microstructure and Electrochemical Performance of Ni/YSZ Anode Deposited by APS

The Structure and Properties of Plasma Sprayed Fe Doped Manganese Cobalt Oxide Spinel Coatings for SOFC Metallic Interconnectors

J. Puranen; L. Lagerbom; L. Hyvärinen; M. Kylmälahti; P. Vuoristo

ITSC 2010; 450-454https://doi.org/10.31399/asm.cp.itsc2010p0450

View Articletitled, The Structure and Properties of Plasma Sprayed Fe Doped Manganese Cobalt Oxide Spinel Coatings for SOFC Metallic Interconnectors

Process Diagnostics

NIR (Near-Infra-Red) Sensor – An Alternative Diagnostic Tool for the Online Process Control of Thermal Spray Processes

A. Schwenk; A. Wank; T. Wallendorf; S. Marke

ITSC 2010; 120-123https://doi.org/10.31399/asm.cp.itsc2010p0120

View Articletitled, NIR (Near-Infra-Red) Sensor – An Alternative Diagnostic Tool for the Online Process Control of Thermal Spray Processes

The Next Step in Intelligent Gun Technology – EvoLink for Plasma Spraying

M. Koller; A. Kilchenmann

ITSC 2010; 124-129https://doi.org/10.31399/asm.cp.itsc2010p0124

View Articletitled, The Next Step in Intelligent Gun Technology – EvoLink for Plasma Spraying

Measurement of Particle Parameters in Detonation Spraying

I. Smurov; D. Pervushin; Yu. Chivel; B. Laget; V. Ulianitsky; S. Zlobin

ITSC 2010; 130-134https://doi.org/10.31399/asm.cp.itsc2010p0130

View Articletitled, Measurement of Particle Parameters in Detonation Spraying

Correlations Between the Oscillation Modes of Arc Voltage and Pressure in Cathode Cavity of Dc Plasma Torches

V. Rat; J.-F. Coudert

ITSC 2010; 498-503https://doi.org/10.31399/asm.cp.itsc2010p0498

View Articletitled, Correlations Between the Oscillation Modes of Arc Voltage and Pressure in Cathode Cavity of Dc Plasma Torches

Loading Effect in Plasma Spraying: from In-Flight Particle State Distributions to Diagnostic Reliability

K. Shinoda; Y. Tan; S. Sampath

ITSC 2010; 504-509https://doi.org/10.31399/asm.cp.itsc2010p0504

View Articletitled, Loading Effect in Plasma Spraying: from In-Flight Particle State Distributions to Diagnostic Reliability

Improving Powder Injection in Plasma Spraying by Optical Diagnostics of the Plasma and Particle Characterization

G. Mauer; R. Vaßen; D. Stöver; S. Kirner; J.-L. Marqués; S. Zimmermann; G. Forster; J. Schein

ITSC 2010; 510-515https://doi.org/10.31399/asm.cp.itsc2010p0510

View Articletitled, Improving Powder Injection in Plasma Spraying by Optical Diagnostics of the Plasma and Particle Characterization

Quality and Qualification

Education, Training and Certification in Thermal Spraying

R. Huber; A. Ohliger-Volmer; F. Zech

ITSC 2010; 135-139https://doi.org/10.31399/asm.cp.itsc2010p0135

View Articletitled, Education, Training and Certification in Thermal Spraying

GTS – An Important Regulator for Thermal Spray Technology

P. Heinrich; C. Penszior

ITSC 2010; 140-148https://doi.org/10.31399/asm.cp.itsc2010p0140

View Articletitled, GTS – An Important Regulator for Thermal Spray Technology

The Shear Test for Thermally Sprayed Coatings in Quality Management

R. Winkler; S. Hartmann; F. Deuerler

ITSC 2010; 149-152https://doi.org/10.31399/asm.cp.itsc2010p0149

View Articletitled, The Shear Test for Thermally Sprayed Coatings in Quality Management

Paper and Printing Applications

Colferoloy—an Iron-Based Alternative for Wear Resistance Applications

G. C. Stratford; A. J. Battenbough; P. J. Allnatt; H. Burkard

ITSC 2010; 153-157https://doi.org/10.31399/asm.cp.itsc2010p0153

View Articletitled, Colferoloy—an Iron-Based Alternative for Wear Resistance Applications

Thermally Sprayed Fine Fe-Based Materials for Wear Protection Applications in the Printing Industry

K. Bobzin; T. Schlaefer; T. Warda; M. Schaefer

ITSC 2010; 158-162https://doi.org/10.31399/asm.cp.itsc2010p0158

View Articletitled, Thermally Sprayed Fine Fe-Based Materials for Wear Protection Applications in the Printing Industry

Cold Spraying of Zn and Zn-Alloy Coatings for Print

K. Onizawa; J. Jansen; M. Schulze; F. Gärtner; T. Klassen

ITSC 2010; 163-166https://doi.org/10.31399/asm.cp.itsc2010p0163

View Articletitled, Cold Spraying of Zn and Zn-Alloy Coatings for Print

Biomedical Coating Applications

Evaluation of the Photocatalytic Activity of TiO₂-Coatings Prepared by Different Thermal Spray Techniques

H. Gutzmann; J.-O. Kliemann; R. Albrecht; F. Gärtner; T. Klassen; F.-L. Toma; L.-M. Berger; B. Leupolt

ITSC 2010; 167-171https://doi.org/10.31399/asm.cp.itsc2010p0167

View Articletitled, Evaluation of the Photocatalytic Activity of TiO<sub>2</sub>-Coatings Prepared by Different Thermal Spray Techniques

Deposition of TiO₂ Ceramic Particles on Cold Spray Process

M. Yamada; H. Isago; K. Shima; H. Nakano; M. Fukumoto

ITSC 2010; 172-176https://doi.org/10.31399/asm.cp.itsc2010p0172

View Articletitled, Deposition of TiO<sub>2</sub> Ceramic Particles on Cold Spray Process

Off-Shore Applications

The Performance of Different WC-Based Cermet Coatings in Oil and Gas Applications – A Comparison

H. Meng; A. Neville; P. Gourdji; X. Hu

ITSC 2010; 177-182https://doi.org/10.31399/asm.cp.itsc2010p0177

View Articletitled, The Performance of Different WC-Based Cermet Coatings in Oil and Gas Applications – A Comparison

Cavitation Erosion Properties and Fracture Morphology of Thermal Spray Coatings

A. Kanno; T. Takabatake; Y. Namba; K. Tani; S. Uematsu; S. Sugasawa; M. Yoshioka; Y. Ishihara

ITSC 2010; 183-188https://doi.org/10.31399/asm.cp.itsc2010p0183

View Articletitled, Cavitation Erosion Properties and Fracture Morphology of Thermal Spray Coatings

The Advancement and Positioning of Laser Cladding in the Surface Engineering Industry

T. Marchione; D. Dezert; A. Choong

ITSC 2010; 189-196https://doi.org/10.31399/asm.cp.itsc2010p0189

View Articletitled, The Advancement and Positioning of Laser Cladding in the Surface Engineering Industry

Nanomaterial Coatings

Comparison of Al₂O₃ and Al₂O₃-TiO₂ Coatings Manufactured by Aqueous and Alcoholic Suspension Plasma Spraying

G. Darut; S. Valette; G. Montavon; H. Ageorges; A. Denoirjean; P. Fauchais; E. Klyatskina; F. Segova; M. D. Salvador

ITSC 2010; 197-202https://doi.org/10.31399/asm.cp.itsc2010p0197

View Articletitled, Comparison of Al<sub>2</sub>O<sub>3</sub> and Al<sub>2</sub>O<sub>3</sub>-TiO<sub>2</sub> Coatings Manufactured by Aqueous and Alcoholic Suspension Plasma Spraying

Duration and Reliability of Axial Suspension Plasma Spray Process

Z. Tang; P. Hartell; G. Masindo; N. Bogdanovic; I. Yaroslavski; H. Kim; J. Restrepo; D. Ellsworth; A. Burgess

ITSC 2010; 203-206https://doi.org/10.31399/asm.cp.itsc2010p0203

View Articletitled, Duration and Reliability of Axial Suspension Plasma Spray Process

Crystal and Micro Structures of Plasma Sprayed Yttrium Oxide Coatings by Axial Injection of Fine Powder Slurries

J. Kitamura; H. Mizuno; K. Sato; Z. Tang; A. Burgess

ITSC 2010; 207-212https://doi.org/10.31399/asm.cp.itsc2010p0207

View Articletitled, Crystal and Micro Structures of Plasma Sprayed Yttrium Oxide Coatings by Axial Injection of Fine Powder Slurries

Improved Mechanical Properties of Coatings and Bulk Components as a Function of Grain Size

C. Melnyk; S. Schroeder; D. Grant; R. Gansert; M. Watson

ITSC 2010; 539-543https://doi.org/10.31399/asm.cp.itsc2010p0539

View Articletitled, Improved Mechanical Properties of Coatings and Bulk Components as a Function of Grain Size

Effect of Stand-Off Distance on EMAA Splats Deposited onto Glass and Mild Steel Substrates

W. Xie; S. Saber-Samandari; M. F. Morks; K. Alamara; J. Wang; C. Berndt

ITSC 2010; 544-547https://doi.org/10.31399/asm.cp.itsc2010p0544

View Articletitled, Effect of Stand-Off Distance on EMAA Splats Deposited onto Glass and Mild Steel Substrates

Economic and Environmental Aspects

Selective Impact of Industrial Gases on the Thermal Spray Process

W. Krömmer; P. Heinrich

ITSC 2010; 228-231https://doi.org/10.31399/asm.cp.itsc2010p0228

View Articletitled, Selective Impact of Industrial Gases on the Thermal Spray Process

The Use of National and EC Public Funds for Financing R&D Activities: The Case of a Thermal Spray Shop

S. Meneghetti; C. Giolli; A. Giorgetti; A. Scrivani

ITSC 2010; 232-237https://doi.org/10.31399/asm.cp.itsc2010p0232

View Articletitled, The Use of National and EC Public Funds for Financing R&D Activities: The Case of a Thermal Spray Shop

Measurement of Particle Emissions Generated by Arc Spray and Flame Spray Processes

D. Billières; D. Bémer; I. Subra; M. Lecler; R. Régnier; Y. Morele; J. Gutha

ITSC 2010; 238-242https://doi.org/10.31399/asm.cp.itsc2010p0238

View Articletitled, Measurement of Particle Emissions Generated by Arc Spray and Flame Spray Processes

Thermal Spray Coating Properties

Influence of Substrate Surface Temperature on the Microstructure and Properties of Plasma-Sprayed Al₂O₃ Coatings

S. Hao; C.-J. Li; G.-J. Yang; Y.-Z. Xing

ITSC 2010; 259-265https://doi.org/10.31399/asm.cp.itsc2010p0259

View Articletitled, Influence of Substrate Surface Temperature on the Microstructure and Properties of Plasma-Sprayed Al<sub>2</sub>O<sub>3</sub> Coatings

Thermophysical Studies on Thermally Sprayed Tungsten Carbide-Cobalt Coatings

S. Thiele; K. Sempf; K. Jaenicke-Roessler; L.-M. Berger; J. Spatzier

ITSC 2010; 266-271https://doi.org/10.31399/asm.cp.itsc2010p0266

View Articletitled, Thermophysical Studies on Thermally Sprayed Tungsten Carbide-Cobalt Coatings

Comparative Study of the Electrical Properties and Microstructures of Thermally Sprayed Alumina and Spinel Coatings

F.-L. Toma; S. Scheitz; L.-M. Berger; V. Sauchuk; M. Kusnezoff

ITSC 2010; 272-277https://doi.org/10.31399/asm.cp.itsc2010p0272

View Articletitled, Comparative Study of the Electrical Properties and Microstructures of Thermally Sprayed Alumina and Spinel Coatings

Arc Spraying of WC-FeCSiMn Cored Wires – Part 1: Bending, Compression and Tension Behavior

J. Nebel; E. Vogli; W. Tillmann

ITSC 2010; 592-600https://doi.org/10.31399/asm.cp.itsc2010p0592

View Articletitled, Arc Spraying of WC-FeCSiMn Cored Wires – Part 1: Bending, Compression and Tension Behavior

A Comparative Study of the Splat Morphology and the Splat-Substrate Interaction for NiCr Sprayed Onto Stainless Steel by Both Plasma and HVOF Spraying

S. Brossard; P. R. Munroe

ITSC 2010; 601-606https://doi.org/10.31399/asm.cp.itsc2010p0601

View Articletitled, A Comparative Study of the Splat Morphology and the Splat-Substrate Interaction for NiCr Sprayed Onto Stainless Steel by Both Plasma and HVOF Spraying

Observation of Microstructures in Thermal Sprayed Coatings and Single Deposited Splats using Ion Beam Milling

K. H. Kim; M. Watanabe; S. Kuroda; N. Kawano

ITSC 2010; 607-612https://doi.org/10.31399/asm.cp.itsc2010p0607

View Articletitled, Observation of Microstructures in Thermal Sprayed Coatings and Single Deposited Splats using Ion Beam Milling

Functionally Graded Coatings Produced by Means of Twin Wire Arc Spraying

W. Tillmann; E. Vogli; M. Abdulgader

ITSC 2010; 613-618https://doi.org/10.31399/asm.cp.itsc2010p0613

View Articletitled, Functionally Graded Coatings Produced by Means of Twin Wire Arc Spraying

Influence of Pores and Cracks Morphology on Mechanical Behavior of Thermally Sprayed Ceramics

R Mušálek; J. Matìjíèek; V. Pejchal; E. Mari; A. Valarezo; S. Sampath

ITSC 2010; 708-713https://doi.org/10.31399/asm.cp.itsc2010p0708

View Articletitled, Influence of Pores and Cracks Morphology on Mechanical Behavior of Thermally Sprayed Ceramics

Hard Chrome Replacement

APS-Al₂O₃ Coatings Versus Arc-Sprayed and Plasma-Anodised Al Layers

T. Lampke; D. Meyer; H. Pokhmurska; B. Wielage

ITSC 2010; 278-282https://doi.org/10.31399/asm.cp.itsc2010p0278

View Articletitled, APS-Al<sub>2</sub>O<sub>3</sub> Coatings Versus Arc-Sprayed and Plasma-Anodised Al Layers

Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Plasma Spray Process

N. Serres; F. Hlawka; S. Costil; C. Langlade; F. Machi

ITSC 2010; 283-288https://doi.org/10.31399/asm.cp.itsc2010p0283

View Articletitled, Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Plasma Spray Process

Microstructure and Enhanced Mechanical Properties of WC-Co Coatings Obtained by Warm Spraying

S. Kuroda; G. Raman; M. Watanabe; M. Komatsu; K. Sato; J. Kitamura

ITSC 2010; 289-293https://doi.org/10.31399/asm.cp.itsc2010p0289

View Articletitled, Microstructure and Enhanced Mechanical Properties of WC-Co Coatings Obtained by Warm Spraying

Industrial Applications

Wire Arc Sprayed Iron-Based Anti-Corrosion Coatings for Waste Incineration Plants

J. Wilden; V. Drescher; M. Djahanbakhsh; R. Durham; M. Schütze

ITSC 2010; 294-297https://doi.org/10.31399/asm.cp.itsc2010p0294

View Articletitled, Wire Arc Sprayed Iron-Based Anti-Corrosion Coatings for Waste Incineration Plants

Effect of M-CrAlY Coating for Corrosion Resistance in Specific High Temperature Atmosphere

A. Niwa; K. Hamashima

ITSC 2010; 298-301https://doi.org/10.31399/asm.cp.itsc2010p0298

View Articletitled, Effect of M-CrAlY Coating for Corrosion Resistance in Specific High Temperature Atmosphere

Microstructure and NO₂ Sensing Performance of APS ZnO Coatings

C. Zhang; M. Debliquy; H. Liao

ITSC 2010; 302-308https://doi.org/10.31399/asm.cp.itsc2010p0302

View Articletitled, Microstructure and NO<sub>2</sub> Sensing Performance of APS ZnO Coatings

Tungsten-Based Coatings to Increase the Lifetime of Permanent-Mold Casting Molds

J. Wilden; V.E. Drescher

ITSC 2010; 309-313https://doi.org/10.31399/asm.cp.itsc2010p0309

View Articletitled, Tungsten-Based Coatings to Increase the Lifetime of Permanent-Mold Casting Molds

Young Scientists

Mathematical Modelling and Simulation of a Kerosene Driven HVOF-Process

K. Bobzin; N. Bagcivan; M. Schäfer

ITSC 2010; 335-340https://doi.org/10.31399/asm.cp.itsc2010p0335

View Articletitled, Mathematical Modelling and Simulation of a Kerosene Driven HVOF-Process

Cold Spraying for Titanium Dioxide Coatings with High Photocatalytic Bactericidal Activity

J.-O. Kliemann; H. Gutzmann; F. Gärtner; T. Klassen; H. Gabriel

ITSC 2010; 341-344https://doi.org/10.31399/asm.cp.itsc2010p0341

View Articletitled, Cold Spraying for Titanium Dioxide Coatings with High Photocatalytic Bactericidal Activity

Flattening and Cooling of Millimeter- and Micrometer-Sized Alumina Drops

S. Goutier; M. Vardelle; J.C. Labbe; P. Fauchais

ITSC 2010; 345-351https://doi.org/10.31399/asm.cp.itsc2010p0345

View Articletitled, Flattening and Cooling of Millimeter- and Micrometer-Sized Alumina Drops

Effect of Annealing on Microstructure of Cold Sprayed C-BNp/NiCrAl Composite Coating

X.-T. Luo; C.-J. Li; G.-J. Yang

ITSC 2010; 352-357https://doi.org/10.31399/asm.cp.itsc2010p0352

View Articletitled, Effect of Annealing on Microstructure of Cold Sprayed C-BNp/NiCrAl Composite Coating

Coating of Aluminum Components with Iron-Based Nanocrystalline Solidifying Materials to Improve Wear Resistance

J. Wilden; V.E. Drescher; O. Lehmann

ITSC 2010; 358-363https://doi.org/10.31399/asm.cp.itsc2010p0358

View Articletitled, Coating of Aluminum Components with Iron-Based Nanocrystalline Solidifying Materials to Improve Wear Resistance

PIV Measurements of Metallic Powders Produced by Liquid Metal Atomization Using de Laval Nozzle

O. Khatim; M.P. Planche; L. Dembinsky; C. Coddet; Y. Bailly; F. Guermeur; L. Girardot

ITSC 2010; 364-369https://doi.org/10.31399/asm.cp.itsc2010p0364

View Articletitled, PIV Measurements of Metallic Powders Produced by Liquid Metal Atomization Using de Laval Nozzle

Columnar Structured Thermal Barrier Coatings (TBCs) by Thin Film Low Pressure Plasma Spraying (LPPS-TF^TM)

A. Hospach; G. Mauer; R. Vaßen; D. Stöver

ITSC 2010; 370-373https://doi.org/10.31399/asm.cp.itsc2010p0370

View Articletitled, Columnar Structured Thermal Barrier Coatings (TBCs) by Thin Film Low Pressure Plasma Spraying (LPPS-TF<sup>TM</sup>)

Velocity Diagnostics for Gas Velocity Distributions in Cold Gas and Plasma Spraying Using Non-Resonant Laser Scattering

S. Lange; M. Sieber; G. Forster; J.L. Marqués; J. Schein

ITSC 2010; 374-378https://doi.org/10.31399/asm.cp.itsc2010p0374

View Articletitled, Velocity Diagnostics for Gas Velocity Distributions in Cold Gas and Plasma Spraying Using Non-Resonant Laser Scattering

Effect of Heat Treatment on Porosity and Corrosion Performance of Cold Sprayed Titanium Deposits

T. Hussain; D.G. McCartney; P.H. Shipway; T. Marrocco

ITSC 2010; 379-384https://doi.org/10.31399/asm.cp.itsc2010p0379

View Articletitled, Effect of Heat Treatment on Porosity and Corrosion Performance of Cold Sprayed Titanium Deposits

Relations between in Flight Particle Characteristics and Coating Properties by HVOF-Spraying

W. Tillmann; E. Vogli; B. Hussong; S. Kuhnt; N. Rudak

ITSC 2010; 385-390https://doi.org/10.31399/asm.cp.itsc2010p0385

View Articletitled, Relations between in Flight Particle Characteristics and Coating Properties by HVOF-Spraying

Consolidation of Al²O³/Al Nanocomposite Powder by Cold Spray

D. Poirier; J.-G. Legoux; R. A. L. Drew; R. Gauvin

ITSC 2010; 391-397https://doi.org/10.31399/asm.cp.itsc2010p0391

View Articletitled, Consolidation of Al<sup>2</sup>O<sup>3</sup>/Al Nanocomposite Powder by Cold Spray

Adhesion of YSZ Nanostructured Coating on Haynes 230 Substrate

R. Vert; E. Meillot; A. Vardelle; G. Mariaux; C. Dublanche-Tixier; D. Chicot

ITSC 2010; 398-403https://doi.org/10.31399/asm.cp.itsc2010p0398

View Articletitled, Adhesion of YSZ Nanostructured Coating on Haynes 230 Substrate

Thermal Spray Forming of High-Efficiency, Metal-Foam Heat Exchanger Tubes

N. Tsolas; S. Chandra; H. Salimjazi; V.I. Pershin; J. Mostaghimi

ITSC 2010; 404-409https://doi.org/10.31399/asm.cp.itsc2010p0404

View Articletitled, Thermal Spray Forming of High-Efficiency, Metal-Foam Heat Exchanger Tubes

Process Modeling and Simulation

Microstructural Modelling and Performance Simulation of Engineered Bio-Composites

U. Tietz; C.C. Berndt; K.-P. Schmitz

ITSC 2010; 516-521https://doi.org/10.31399/asm.cp.itsc2010p0516

View Articletitled, Microstructural Modelling and Performance Simulation of Engineered Bio-Composites

The Improvements of Thermal Spray Toolkit, Extended Software for Robotic Off-Line Programming

D. Fang; S. Deng; H. Liao; C. Coddet

ITSC 2010; 522-526https://doi.org/10.31399/asm.cp.itsc2010p0522

View Articletitled, The Improvements of Thermal Spray Toolkit, Extended Software for Robotic Off-Line Programming

Effect of Ambient Pressure and Substrate Temperature on Heat Transfer at Interface Between Molten Droplet and Substrate Surface

M. Fukumoto; K. Tanaka; K. Yang; T. Usami; T. Yasui; M. Yamada

ITSC 2010; 527-532https://doi.org/10.31399/asm.cp.itsc2010p0527

View Articletitled, Effect of Ambient Pressure and Substrate Temperature on Heat Transfer at Interface Between Molten Droplet and Substrate Surface

Homogenization of Coating Properties in Atmospheric Plasma Spraying – Current Results of a DFG (German Research Foundation)-Funded Research Group

K. Bobzin; N. Bagcivan; I. Petković; J. Schein; K. Landes; G. Forster; K. Hartz-Behrend; S. Kirner; J.-L. Marqués; S. Zimmermann; Fr.-W. Bach; K. Möhwald; J. Prehm; L. Xin

ITSC 2010; 533-538https://doi.org/10.31399/asm.cp.itsc2010p0533

View Articletitled, Homogenization of Coating Properties in Atmospheric Plasma Spraying – Current Results of a DFG (German Research Foundation)-Funded Research Group

Effects of Fluid/Solid Couplings on the Plasma Flow Inside a Direct Current Plasma Gun

R. Bolot; C. Coddet; A. Allimant; D. Billières

ITSC 2010; 619-624https://doi.org/10.31399/asm.cp.itsc2010p0619

View Articletitled, Effects of Fluid/Solid Couplings on the Plasma Flow Inside a Direct Current Plasma Gun

Effect of Using Liquid Feedstock in a High Pressure Cold Spray Nozzle

E. Farvardin; O. Stier; V. Luthen; A. Dolatabadi

ITSC 2010; 625-630https://doi.org/10.31399/asm.cp.itsc2010p0625

View Articletitled, Effect of Using Liquid Feedstock in a High Pressure Cold Spray Nozzle

Metastable Austenite Type Core Wire for Arc Spraying – Modeling of Heat Transfer in End Face and Coating Structure Analysis

Yu. Korobov; M. Filippov; A. Belozertsev; S. Neveszin; V. Shymiakov

ITSC 2010; 631-635https://doi.org/10.31399/asm.cp.itsc2010p0631

View Articletitled, Metastable Austenite Type Core Wire for Arc Spraying – Modeling of Heat Transfer in End Face and Coating Structure Analysis

Predicting the Thermal Conductivity of AlSi/Polyester Abradable Coatings: Effects of the Numerical Method

R. Bolot; J. L. Seichepine; J. H. Qiao; C. Coddet

ITSC 2010; 636-641https://doi.org/10.31399/asm.cp.itsc2010p0636

View Articletitled, Predicting the Thermal Conductivity of AlSi/Polyester Abradable Coatings: Effects of the Numerical Method

In Situ Observation of Impact Phenomena of Zirconia Molten Drops in Millimeter Scale Via Aerodynamic Levitator

K. Shinoda; K. Nagashio; H. Murakami; S. Kuroda; K. Kuribayashi

ITSC 2010; 642-647https://doi.org/10.31399/asm.cp.itsc2010p0642

View Articletitled, In Situ Observation of Impact Phenomena of Zirconia Molten Drops in Millimeter Scale Via Aerodynamic Levitator

Aerospace Applications

Mechanical Properties and Behaviour of BSAS/Mullite-Based Environmental Barrier Coatings Exposed to High Temperature in Water Vapour Environment

C.V. Cojocaru; S.E. Kruger; R.S. Lima; C. Moreau

ITSC 2010; 566-571https://doi.org/10.31399/asm.cp.itsc2010p0566

View Articletitled, Mechanical Properties and Behaviour of BSAS/Mullite-Based Environmental Barrier Coatings Exposed to High Temperature in Water Vapour Environment

Ti-Parts for Aviation Industry Produced by Cold Spraying

K. Binder; F. Gärtner; T. Klassen

ITSC 2010; 572-577https://doi.org/10.31399/asm.cp.itsc2010p0572

View Articletitled, Ti-Parts for Aviation Industry Produced by Cold Spraying

High Temperature Mechanical Behaviour of UHTC Coatings for Thermal Protection of Re-Entry Vehicles

G. Pulci; M. Tului; J. Tirillò; F. Marra; J. Lionetti; T. Valente

ITSC 2010; 578-583https://doi.org/10.31399/asm.cp.itsc2010p0578

View Articletitled, High Temperature Mechanical Behaviour of UHTC Coatings for Thermal Protection of Re-Entry Vehicles

Near-Net-Shape HVOF Coating and Finishing Techniques for Highly Stressed Components in Aircraft Industry

G. Matthäus; J. Wolf; D. Ackermann

ITSC 2010; 584-586https://doi.org/10.31399/asm.cp.itsc2010p0584

View Articletitled, Near-Net-Shape HVOF Coating and Finishing Techniques for Highly Stressed Components in Aircraft Industry

Influence of the Surface State on the Adherence of the Coating: Case of an Alumina Coating Plasma Sprayed on SiC Composites

S. Costil; S. Lukat; C. Verdy; C. Coddet

ITSC 2010; 587-591https://doi.org/10.31399/asm.cp.itsc2010p0587

View Articletitled, Influence of the Surface State on the Adherence of the Coating: Case of an Alumina Coating Plasma Sprayed on SiC Composites

Corrosion Protection

Assessment of Flame-Sprayed Glaze Layers as Diffusion Barriers on Refractory Materials

O. Preziosa; A. Denoirjean; G. Montavon; P. Denoirjean; P. Fauchais; T. Chartier; C. Barthhelemy; V. Laurent; D. Lombard

ITSC 2010; 648-653https://doi.org/10.31399/asm.cp.itsc2010p0648

View Articletitled, Assessment of Flame-Sprayed Glaze Layers as Diffusion Barriers on Refractory Materials

Phase Composition and Microstructural Responses of Crystalline Mullite/YSZ Coating Under Water Vapor Environments

E. Garcia; J. Mesquita-Guimarães; P. Miranz; M. I. Osendi; C. V. Cojocaru; Y. Wang; C. Moreau; R. S. Lima

ITSC 2010; 654-657https://doi.org/10.31399/asm.cp.itsc2010p0654

View Articletitled, Phase Composition and Microstructural Responses of Crystalline Mullite/YSZ Coating Under Water Vapor Environments

Corrosion of Ti Coating Prepared by Modified HVOF Process

C. M. Deng; C. G. Deng; M. Liu; J. Huang; K. S. Zhou; Z. K. Chen; A. Wank; A. Schwenk

ITSC 2010; 658-662https://doi.org/10.31399/asm.cp.itsc2010p0658

View Articletitled, Corrosion of Ti Coating Prepared by Modified HVOF Process

Corrosion Behavior of NiCrBSi Alloy Coatings Manufactured Via in Situ Plasma Spray – Laser Re-Melting Process

N. Serres; F. Hlawka; S. Costil; C. Langlade; F. Machi

ITSC 2010; 662-668https://doi.org/10.31399/asm.cp.itsc2010p0662

View Articletitled, Corrosion Behavior of NiCrBSi Alloy Coatings Manufactured Via in Situ Plasma Spray – Laser Re-Melting Process

Cyclic Oxidation Behavior of HVOF-Sprayed Ni-20Cr Coating on ASTM-SA213-T22 Boiler Steel at 900 °C

G. Kaushal; H. Singh; S. Prakash

ITSC 2010; 668-672https://doi.org/10.31399/asm.cp.itsc2010p0668

View Articletitled, Cyclic Oxidation Behavior of HVOF-Sprayed Ni-20Cr Coating on ASTM-SA213-T22 Boiler Steel at 900 °C

Biomedical and Polymer Coatings

Feasibility of Polycarbonate Coatings by Cold Spray Process

D. Seo; N. Mahiou; K. Ogawa; T. Shoji; K. Ito; I. Tirtom

ITSC 2010; 714-721https://doi.org/10.31399/asm.cp.itsc2010p0714

View Articletitled, Feasibility of Polycarbonate Coatings by Cold Spray Process

Microstructures and Adhesive Bonding Strength Analysis of Plasma Sprayed Silica Modified Hydroxyapatite Coatings on Ti-6Al-4V substrates

J. L. Xu; K. A. Khor; J. Cizek

ITSC 2010; 721-724https://doi.org/10.31399/asm.cp.itsc2010p0721

View Articletitled, Microstructures and Adhesive Bonding Strength Analysis of Plasma Sprayed Silica Modified Hydroxyapatite Coatings on Ti-6Al-4V substrates

Design of Experiment Analysis of the Sulzer Metco DJ High Velocity Oxy-Fuel Coating of Hydroxyapatite for Orthopaedic Applications

S. Hasan; J. Stokes

ITSC 2010; 725-729https://doi.org/10.31399/asm.cp.itsc2010p0725

View Articletitled, Design of Experiment Analysis of the Sulzer Metco DJ High Velocity Oxy-Fuel Coating of Hydroxyapatite for Orthopaedic Applications

Poster Session: Aerospace Applications

Mechanical Behaviour of Air-Plasma Sprayed Functionally Graded YSZ-Mullite Environmental Barrier Coatings: A Study Via Instrumented Indentation

C. V. Cojocaru; Y. Wang; R. S. Lima; C. Moreau; J. Mesquita-Guimarães; E. Garcia; P. Miranzo; M. I. Osendi

ITSC 2010; 730-735https://doi.org/10.31399/asm.cp.itsc2010p0730

View Articletitled, Mechanical Behaviour of Air-Plasma Sprayed Functionally Graded YSZ-Mullite Environmental Barrier Coatings: A Study Via Instrumented Indentation

Research of Plasma Spraying Process of Nanostructured Zirconia Thermal Barrier Coating

H. Sun; C. Wang; X. Liu; Z. Qu; J. Bi

ITSC 2010; 736-740https://doi.org/10.31399/asm.cp.itsc2010p0736

View Articletitled, Research of Plasma Spraying Process of Nanostructured Zirconia Thermal Barrier Coating

Poster Session: Corrosion and Wear Protection

Effect of Temperature on Wear Characteristic of Cast Iron

S. K. Shaha; M. M. Haque; S. Dyuti

ITSC 2010; 741-745https://doi.org/10.31399/asm.cp.itsc2010p0741

View Articletitled, Effect of Temperature on Wear Characteristic of Cast Iron

Microstructure and Electrochemical Behavior of Fe-Based Amorphous Metallic Coatings Fabricated by Atmospheric Plasma Spraying

Z. Zhou; L. Wang; D. He; F. Wang; Y. Liu

ITSC 2010; 745-750https://doi.org/10.31399/asm.cp.itsc2010p0745

View Articletitled, Microstructure and Electrochemical Behavior of Fe-Based Amorphous Metallic Coatings Fabricated by Atmospheric Plasma Spraying

Analysis of Fe-base Materials and Evaluation of their Suitability for Wear Protection Coatings

A. Pelz

ITSC 2010; 751-757https://doi.org/10.31399/asm.cp.itsc2010p0751

View Articletitled, Analysis of Fe-base Materials and Evaluation of their Suitability for Wear Protection Coatings

Comparative Analysis of Anti-Cavitation and Abrasion Resistance Properties of two Different Detonation Coatings

K.-F Huang; J.-P. Fang; S.-H. Wu; B. Xu; L. Ye; Z.-K. Liu

ITSC 2010; 758-761https://doi.org/10.31399/asm.cp.itsc2010p0758

View Articletitled, Comparative Analysis of Anti-Cavitation and Abrasion Resistance Properties of two Different Detonation Coatings

Degradation Mechanisms of Thermally Sprayed Coatings in Chloride Containing Electrolytes

J. Laurila; K. Niemi; P. Vuoristo

ITSC 2010; 762-767https://doi.org/10.31399/asm.cp.itsc2010p0762

View Articletitled, Degradation Mechanisms of Thermally Sprayed Coatings in Chloride Containing Electrolytes

Poster Session: HVOF, Cold, and Kinetic Spraying

Effects of WC Particle Size on Deposition of Cold Spray WC-Co Coatings

C. C. Berndt; S. M. Ang; P. Cheang; J. Wang

ITSC 2010; 768-773https://doi.org/10.31399/asm.cp.itsc2010p0768

View Articletitled, Effects of WC Particle Size on Deposition of Cold Spray WC-Co Coatings

Modeling of Particle Consolidation by Cold Spray

J. Kocimski; R.Gr. Maev; V. Leshchynsky; A. Ambroziak

ITSC 2010; 774-779https://doi.org/10.31399/asm.cp.itsc2010p0774

View Articletitled, Modeling of Particle Consolidation by Cold Spray

Effect of Powder Preheating Temperature on the Properties of Cu-Based Amorphous Coating Layer by Cold Spray Deposition

J. Cho; D. Park; J. Kim; J. Lee; K. Lee

ITSC 2010; 780-785https://doi.org/10.31399/asm.cp.itsc2010p0780

View Articletitled, Effect of Powder Preheating Temperature on the Properties of Cu-Based Amorphous Coating Layer by Cold Spray Deposition

Location of the Powder Injection as Independent Parameter to Control Particle Velocity and Temperature in Cold Spray

A. Sova; V. Kosarev; S. Klinkov; I. Smurov

ITSC 2010; 786-790https://doi.org/10.31399/asm.cp.itsc2010p0786

View Articletitled, Location of the Powder Injection as Independent Parameter to Control Particle Velocity and Temperature in Cold Spray

Poster Session: Industrial Applications

Oxide Ion Conductivity in Dense Apatite-Type Lanthanum Silicate

W. Gao; H.-L. Liao; C. Coddet

ITSC 2010; 791-796https://doi.org/10.31399/asm.cp.itsc2010p0791

View Articletitled, Oxide Ion Conductivity in Dense Apatite-Type Lanthanum Silicate

Poster Session: Process Modeling and Simulation

Computer-Aided Cooling Curve Used to Predict the Solidification Behavior of Cast Iron

S. K. Shaha; M. M. Haque

ITSC 2010; 797-801https://doi.org/10.31399/asm.cp.itsc2010p0797

View Articletitled, Computer-Aided Cooling Curve Used to Predict the Solidification Behavior of Cast Iron

Poster Session: Plasma and Laser Spraying Processes

Characteristics of Cu Film-Like Coating Deposited Using VLPPS

N. Zhang; F. Sun; L. Zhu; C. Verdy; M. P. Planche; H. Liao; C. Coddet

ITSC 2010; 802-807https://doi.org/10.31399/asm.cp.itsc2010p0802

View Articletitled, Characteristics of Cu Film-Like Coating Deposited Using VLPPS

The Bonding Mechanism of WC-12Co Coatings Prepared by Supersonic Plasma Spraying

H. Yang; S. Pan

ITSC 2010; 808-811https://doi.org/10.31399/asm.cp.itsc2010p0808

View Articletitled, The Bonding Mechanism of WC-12Co Coatings Prepared by Supersonic Plasma Spraying

Effect of Nitrogen Flow Rate on the Microstructure and Transformation Rate of TiN Coatings in Reactive Plasma Spraying

H. Yang; H. Chen

ITSC 2010; 812-815https://doi.org/10.31399/asm.cp.itsc2010p0812

View Articletitled, Effect of Nitrogen Flow Rate on the Microstructure and Transformation Rate of TiN Coatings in Reactive Plasma Spraying

Poster Session: Power Engineering

The Role of Parameters on The Hardness of HVOF Sprayed Bond Coats in Thermal Barrier Coatings

M. Minisker; T. Bengi; E. Ciftyurek; O. Keles; I. Y. Taptik

ITSC 2010; 816-820https://doi.org/10.31399/asm.cp.itsc2010p0816

View Articletitled, The Role of Parameters on The Hardness of HVOF Sprayed Bond Coats in Thermal Barrier Coatings

Poster Session: Pre- and Post-Process Treatments

The PROTAL Process Applied on Cold Spraying to Improve Interface Adherence and Coating Cohesion—Case of Titanium and Nickel Based Alloys

S. Costil; E. Irissou; Y. Danlos; J.-G. Legoux; W. Wong; S. Yue; C. Moreau; C. Coddet

ITSC 2010; 821-826https://doi.org/10.31399/asm.cp.itsc2010p0821

View Articletitled, The PROTAL Process Applied on Cold Spraying to Improve Interface Adherence and Coating Cohesion—Case of Titanium and Nickel Based Alloys

Surface Pretreatments Including Laser Texturing for Thermal Spraying

A. Lamraoui; C. Langlade; S. Costil; C. Coddet

ITSC 2010; 827-831https://doi.org/10.31399/asm.cp.itsc2010p0827

View Articletitled, Surface Pretreatments Including Laser Texturing for Thermal Spraying

Poster Session: Process Diagnostics, Sensors, and Controls

Influence of Improved Plasma Gun on the Particle In-Flight Properties of Temperature and Velocity

H. Yang; G. Li; L. Wang

ITSC 2010; 832-834https://doi.org/10.31399/asm.cp.itsc2010p0832

View Articletitled, Influence of Improved Plasma Gun on the Particle In-Flight Properties of Temperature and Velocity

Effects of Radial Liquid Injection on Atmospheric Plasma Characteristics

D. Soysal; T. Kavka; A. Ansar

ITSC 2010; 835-841https://doi.org/10.31399/asm.cp.itsc2010p0835

View Articletitled, Effects of Radial Liquid Injection on Atmospheric Plasma Characteristics

The Oxy-Fuel Ionization (OFI) Process – Experimental Process Analysis

M. Parco; G. Barykin; I. Fagoaga; G. Mariaux; S. Goutier; M. Vardelle

ITSC 2010; 842-847https://doi.org/10.31399/asm.cp.itsc2010p0842

View Articletitled, The Oxy-Fuel Ionization (OFI) Process – Experimental Process Analysis

Poster Session: Properties, Characterization, and Testing

Comparison of the Structure and Wear Properties of Babbitt Layers Produced by Arc Spraying and by Pouring

Yu. Korobov; B. Potechin; L. Gogolev; V. Ilushin; M. Deviatiarov

ITSC 2010; 848-850https://doi.org/10.31399/asm.cp.itsc2010p0848

View Articletitled, Comparison of the Structure and Wear Properties of Babbitt Layers Produced by Arc Spraying and by Pouring

Characterization of Some Electric Arc Sprayed Cored-Wire and Nano Cored-Wire Cermet Coatings

M. Tuiprae; S. Wirojanupatump; S. Jiansirisomboon

ITSC 2010; 851-856https://doi.org/10.31399/asm.cp.itsc2010p0851

View Articletitled, Characterization of Some Electric Arc Sprayed Cored-Wire and Nano Cored-Wire Cermet Coatings

Arc Spraying of WC-FeCSiMn Cored Wires – Part 2: Young's Modulus Measurement and Simulation

J. Nebel; B. Klusemann; E. Vogli; W. Tillmann; B. Svendsen

ITSC 2010; 857-864https://doi.org/10.31399/asm.cp.itsc2010p0857

View Articletitled, Arc Spraying of WC-FeCSiMn Cored Wires – Part 2: Young's Modulus Measurement and Simulation

Effect of Powder Compressive Strength on Deposition Characteristics in Cold Spraying

T. Sonoda; T. Kuwashima; M. Nakamura; T. Saito

ITSC 2010; 865-869https://doi.org/10.31399/asm.cp.itsc2010p0865

View Articletitled, Effect of Powder Compressive Strength on Deposition Characteristics in Cold Spraying

Addition of hBN to NiAl Coatings Deposited using APS and HVOF Thermal Spraying

W.T. Hsiao; C.Y. Su; T.S. Huang; W.H. Liao; M.S. Leu

ITSC 2010; 870-875https://doi.org/10.31399/asm.cp.itsc2010p0870

View Articletitled, Addition of hBN to NiAl Coatings Deposited using APS and HVOF Thermal Spraying

Preparation Process and Property Research of FeCrAl Intermetallic Compound Coating

C. Wang; H. Sun; X. Liu; Z. Qu; J. Bi

ITSC 2010; 876-879https://doi.org/10.31399/asm.cp.itsc2010p0876

View Articletitled, Preparation Process and Property Research of FeCrAl Intermetallic Compound Coating

Poster Session: Solid Oxide Fuel Cell Applications

Plasma Sprayed Electrolyte of Magnesium Doped Lanthanum Silicate with Apatite-Type Structure

F. Sun; H. Liao; N. Zhang; O. Rapaud; C. Coddet

ITSC 2010; 880-883https://doi.org/10.31399/asm.cp.itsc2010p0880

View Articletitled, Plasma Sprayed Electrolyte of Magnesium Doped Lanthanum Silicate with Apatite-Type Structure

Preparation of Nanocomposite GDC/LSCF Cathode Material for IT-SOFC by RF Induction Plasma Spraying

Y. Shen; F. Gitzhofer; V. Almeida

ITSC 2010; 884-889https://doi.org/10.31399/asm.cp.itsc2010p0884

View Articletitled, Preparation of Nanocomposite GDC/LSCF Cathode Material for IT-SOFC by RF Induction Plasma Spraying

Microstructure and Electrochemical Behavior of Sm_0.5Sr_0.5CoO₃ Deposited by Solution Precursor Plasma Spraying

X.-M. Wang; C.-X. Li; C.-J. Li; L.-H. Tian; B. Song; G.-J. Yang

ITSC 2010; 890-894https://doi.org/10.31399/asm.cp.itsc2010p0890

View Articletitled, Microstructure and Electrochemical Behavior of Sm<sub>0.5</sub>Sr<sub>0.5</sub>CoO<sub>3</sub> Deposited by Solution Precursor Plasma Spraying

Poster Session: Thermal Spray and other Surface Engineering Technologies

Effect of Carbide Type on the Properties of Low Vacuum Plasma Sprayed W-Based Composite Coating Layer

K.-A. Lee; Y.-M. Jin; J.-H. Ahn

ITSC 2010; 895-900https://doi.org/10.31399/asm.cp.itsc2010p0895

View Articletitled, Effect of Carbide Type on the Properties of Low Vacuum Plasma Sprayed W-Based Composite Coating Layer

Volume Information

Preface

ITSC 2010; ivhttps://doi.org/10.31399/asm.cp.itsc2010fm01

View Articletitled, Preface

List of Authors

ITSC 2010; v-xiiihttps://doi.org/10.31399/asm.cp.itsc2010fm02

View Articletitled, List of Authors