Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2007: Proceedings from the International Thermal Spray Conference

Cold Spray

Realization of an Internal Cold Spray Coating of Stainless Steel in an Aluminum Cylinder

S. Alexandre; T. Laguionie; B. Baccuad

ITSC 2007; 1-6https://doi.org/10.31399/asm.cp.itsc2007p0001

View Articletitled, Realization of an Internal Cold Spray Coating of Stainless Steel in an Aluminum Cylinder

Process Development of Brazed Aluminum Heat Exchanger Using a Kinetic Spraying Process

S.H. Yoon; C. Lee; H.J. Kim

ITSC 2007; 7-12https://doi.org/10.31399/asm.cp.itsc2007p0007

View Articletitled, Process Development of Brazed Aluminum Heat Exchanger Using a Kinetic Spraying Process

Investigation of Spray Conditions and Performances of Cold-sprayed Pure Silicon Anodes for Lithium Secondary Batteries

K. Sakaki; S. Shinkai; Y. Shimizu

ITSC 2007; 13-18https://doi.org/10.31399/asm.cp.itsc2007p0013

View Articletitled, Investigation of Spray Conditions and Performances of Cold-sprayed Pure Silicon Anodes for Lithium Secondary Batteries

Pulsed-Cold Gas Dynamic Spraying Process: Development and Capabilities

B. Jodoin; P. Richer; G. Bérubé; L. Ajdelsztajn; M. Yandouzi; A. Erdi

ITSC 2007; 19-24https://doi.org/10.31399/asm.cp.itsc2007p0019

View Articletitled, Pulsed-Cold Gas Dynamic Spraying Process: Development and Capabilities

Influence of the Powder Size Distribution on the Microstructure of Cold Sprayed Copper Coatings Studied by X-ray Diffraction

T. Kairet; M. Degrez; F. Campana; J.-P. Janssen

ITSC 2007; 25-30https://doi.org/10.31399/asm.cp.itsc2007p0025

View Articletitled, Influence of the Powder Size Distribution on the Microstructure of Cold Sprayed Copper Coatings Studied by X-ray Diffraction

Adhesion of Cold Sprayed Coatings: Effect of Powder, Substrate, and Heat Treatment

H. Mäkinen; J. Lagerbom; P. Vuoristo

ITSC 2007; 31-36https://doi.org/10.31399/asm.cp.itsc2007p0031

View Articletitled, Adhesion of Cold Sprayed Coatings: Effect of Powder, Substrate, and Heat Treatment

Properties of SiC-Reinforced Aluminum Alloy Coatings Produced by the Cold Spray Deposition Process

E. Sansoucy; L. Ajdelsztajn; B. Jodoin; P. Marcoux

ITSC 2007; 37-42https://doi.org/10.31399/asm.cp.itsc2007p0037

View Articletitled, Properties of SiC-Reinforced Aluminum Alloy Coatings Produced by the Cold Spray Deposition Process

Densification of Ti Coatings by Bi-modal Size Distribution of Feedstock Powder During Warm Spraying

J. Kawakita; M. Watanabe; S. Kuroda; H. Katanoda

ITSC 2007; 43-47https://doi.org/10.31399/asm.cp.itsc2007p0043

View Articletitled, Densification of Ti Coatings by Bi-modal Size Distribution of Feedstock Powder During Warm Spraying

Effect of Substrate Temperature on the Formation Mechanism of Cold Sprayed Aluminum, Zinc, and Tin Coatings

J.G. Legoux; E. Irissou; C. Moreau

ITSC 2007; 48-53https://doi.org/10.31399/asm.cp.itsc2007p0048

View Articletitled, Effect of Substrate Temperature on the Formation Mechanism of Cold Sprayed Aluminum, Zinc, and Tin Coatings

Deposition Mechanisms of Cold Gas Dynamic Sprayed MCrAIY Coatings

Y. Ichikawa; K. Sakaguchi; K. Ogawa; T. Shoji; S. Barradas; M. Jeandin; M. Boustie

ITSC 2007; 54-59https://doi.org/10.31399/asm.cp.itsc2007p0054

View Articletitled, Deposition Mechanisms of Cold Gas Dynamic Sprayed MCrAIY Coatings

Impact Fusion of Particle Interfaces in Cold Spraying and Its Effect on Coating Microstructure

W.-Y. Li; C. Zhang; X.P. Guo; L. Dembinski; H. Liao; C. Coddet; C.-J. Li

ITSC 2007; 60-65https://doi.org/10.31399/asm.cp.itsc2007p0060

View Articletitled, Impact Fusion of Particle Interfaces in Cold Spraying and Its Effect on Coating Microstructure

Oxidation Effects on the Critical Velocity of Pure Al Feedstock Deposition in the Kinetic Spraying Process

K.C. Kang; S.H. Yoon; Y.G. Ji; C. Lee

ITSC 2007; 66-71https://doi.org/10.31399/asm.cp.itsc2007p0066

View Articletitled, Oxidation Effects on the Critical Velocity of Pure Al Feedstock Deposition in the Kinetic Spraying Process

Numerical Study of Combination Parameters for Particle Impact Velocity and Temperature in Cold Spray

H. Katanoda; M. Fukuhara; N. Iino

ITSC 2007; 72-77https://doi.org/10.31399/asm.cp.itsc2007p0072

View Articletitled, Numerical Study of Combination Parameters for Particle Impact Velocity and Temperature in Cold Spray

Deposition Characteristics of Al-12Si Alloy Coating Fabricated by Cold Spraying with Relatively Large Powder Particles

W.-Y. Li; C. Zhang; X.P. Guo; H.L. Liao; C. Coddet

ITSC 2007; 78-83https://doi.org/10.31399/asm.cp.itsc2007p0078

View Articletitled, Deposition Characteristics of Al-12Si Alloy Coating Fabricated by Cold Spraying with Relatively Large Powder Particles

A Three-Dimensional Analysis of the Cold Spray Process: Effect of Substrate Location and Shape

B. Samareh; A. Dolatabadi

ITSC 2007; 84-89https://doi.org/10.31399/asm.cp.itsc2007p0084

View Articletitled, A Three-Dimensional Analysis of the Cold Spray Process: Effect of Substrate Location and Shape

Electrostatic Assist on a Cold Spray Process by Computational Simulation

H. Takana; K. Ogawa; T. Shoji; H. Nishiyama

ITSC 2007; 90-95https://doi.org/10.31399/asm.cp.itsc2007p0090

View Articletitled, Electrostatic Assist on a Cold Spray Process by Computational Simulation

Deposition Behavior of Sprayed Metallic Particle on Substrate Surface in Cold Spray Process

M. Fukumoto; H. Wada; K. Tanabe; M. Yamada

ITSC 2007; 96-101https://doi.org/10.31399/asm.cp.itsc2007p0096

View Articletitled, Deposition Behavior of Sprayed Metallic Particle on Substrate Surface in Cold Spray Process

Mechanical Characteristics of Al-Co-Ce Coatings Produced by the Cold Spray Process

E. Sansoucy; B. Jodoin; G.E. Kim; A.L. Moran

ITSC 2007; 102-107https://doi.org/10.31399/asm.cp.itsc2007p0102

View Articletitled, Mechanical Characteristics of Al-Co-Ce Coatings Produced by the Cold Spray Process

Investigation of Al-Al₂O₃ Cold Spray Coating Formation and Properties

E. Irissou; J.G. Legoux; B. Arsenault; C. Moreau

ITSC 2007; 108-113https://doi.org/10.31399/asm.cp.itsc2007p0108

View Articletitled, Investigation of Al-Al<sub>2</sub>O<sub>3</sub> Cold Spray Coating Formation and Properties

Deformation Behavior and Properties of a CuZrTiNi BMG Kinetic Spray Coating

J.S. Kim; Y.M. Xiong; C. Lee; H.S. Choi; H.J. Kim

ITSC 2007; 114-117https://doi.org/10.31399/asm.cp.itsc2007p0114

View Articletitled, Deformation Behavior and Properties of a CuZrTiNi BMG Kinetic Spray Coating

Development of Coatings and the Influence of Industrial Gases on the Thermal Spray Process

W. Kroemmer; P. Heinrich

ITSC 2007; 118-122https://doi.org/10.31399/asm.cp.itsc2007p0118

View Articletitled, Development of Coatings and the Influence of Industrial Gases on the Thermal Spray Process

Effect of Process Parameters on the Deposition Characteristics of a Bronze-20 vol.% Diamond Composite in Kinetic Spraying

S. Shin; C. Lee; K.T. Han; H.J. Kim

ITSC 2007; 123-127https://doi.org/10.31399/asm.cp.itsc2007p0123

View Articletitled, Effect of Process Parameters on the Deposition Characteristics of a Bronze-20 vol.% Diamond Composite in Kinetic Spraying

Examination of the Estimating Approaches for the Critical Velocity in Cold Spraying

C.-J. Li; G.-J. Yang; C.-X. Li; H.S. Bang; H.S. Bang; W.-Y. Li

ITSC 2007; 128-134https://doi.org/10.31399/asm.cp.itsc2007p0128

View Articletitled, Examination of the Estimating Approaches for the Critical Velocity in Cold Spraying

Microstructural Characterization of Cold-Sprayed Nanostructured FeAl Intermetallic Compound Coating and its Ball-Milled Feedstock Powder

H.-T. Wang; C.-J. Li; G.-J. Yang; C.-X Li; Q. Zhang; W.-Y. Li

ITSC 2007; 135-140https://doi.org/10.31399/asm.cp.itsc2007p0135

View Articletitled, Microstructural Characterization of Cold-Sprayed Nanostructured FeAl Intermetallic Compound Coating and its Ball-Milled Feedstock Powder

DYMET Technology Evolution and Application

A. Kashirin; O. Klyuev; T. Buzdygar; A. Shkodkin

ITSC 2007; 141-145https://doi.org/10.31399/asm.cp.itsc2007p0141

View Articletitled, DYMET Technology Evolution and Application

Process Modeling and Simulation

Improvement of Plasma Gun Performance using Comprehensive Fluid Element Modeling: Part 1

F. Muggli; R. Molz; R. McCullough; D. Hawley

ITSC 2007; 146-151https://doi.org/10.31399/asm.cp.itsc2007p0146

View Articletitled, Improvement of Plasma Gun Performance using Comprehensive Fluid Element Modeling: Part 1

Improvement of Plasma Gun Performance using Comprehensive Fluid Element Modeling: Part 2

R. Molz; R. McCullough; D. Hawley; F. Muggli

ITSC 2007; 152-157https://doi.org/10.31399/asm.cp.itsc2007p0152

View Articletitled, Improvement of Plasma Gun Performance using Comprehensive Fluid Element Modeling: Part 2

Numerical Simulations of Cascaded Plasma Torch Using Ar and Molecular Gases

L. Chen; J. Mostaghimi; L. Pershin

ITSC 2007; 158-162https://doi.org/10.31399/asm.cp.itsc2007p0158

View Articletitled, Numerical Simulations of Cascaded Plasma Torch Using Ar and Molecular Gases

Flame Flow Analysis for HVOF/HVAF System by Two-Dimension Computational Fluid Dynamics Method

H. Genliang; X. Kewei

ITSC 2007; 163-166https://doi.org/10.31399/asm.cp.itsc2007p0163

View Articletitled, Flame Flow Analysis for HVOF/HVAF System by Two-Dimension Computational Fluid Dynamics Method

Modeling and Diagnostic Study of a Supersonic Impinging Plasma Flow Near the Surface of a Substrate

S. Xue; Y. Lakaf; D. Gravelle; M.I. Boulos

ITSC 2007; 167-172https://doi.org/10.31399/asm.cp.itsc2007p0167

View Articletitled, Modeling and Diagnostic Study of a Supersonic Impinging Plasma Flow Near the Surface of a Substrate

Modeling of the In-Flight Particles Characteristics Using Neural Networks and Analytical Model

A.F. Kanta; M.P. Planche; G. Montavon; C. Coddet

ITSC 2007; 173-178https://doi.org/10.31399/asm.cp.itsc2007p0173

View Articletitled, Modeling of the In-Flight Particles Characteristics Using Neural Networks and Analytical Model

Modeling of an Inductively Coupled Plasma for the Synthesis of Nanoparticles

R. Bolot; C. Coddet; C. Shreuders; M. Leparoux; S. Siegmann

ITSC 2007; 179-184https://doi.org/10.31399/asm.cp.itsc2007p0179

View Articletitled, Modeling of an Inductively Coupled Plasma for the Synthesis of Nanoparticles

Unsteady 3D Large Eddy Simulation of an Ar-H₂ Plasma Jet: Analysis of Initial Results

G. Balmigere; E. Meillot; S. Vincent; J.-P. Caltagirone

ITSC 2007; 185-189https://doi.org/10.31399/asm.cp.itsc2007p0185

View Articletitled, Unsteady 3D Large Eddy Simulation of an Ar-H<sub>2</sub> Plasma Jet: Analysis of Initial Results

Numerical Simulation of the Solution Precursor Plasma Spraying Process

Y. Shan; T.W. Coyle; J. Mostaghimi

ITSC 2007; 190-195https://doi.org/10.31399/asm.cp.itsc2007p0190

View Articletitled, Numerical Simulation of the Solution Precursor Plasma Spraying Process

Liquid Precursor Plasma Spraying: Modeling the Interactions between the Transient Plasma Jet and the Droplets

C. Marchand; C. Chazelas; G. Mariaux; A. Vardelle

ITSC 2007; 196-201https://doi.org/10.31399/asm.cp.itsc2007p0196

View Articletitled, Liquid Precursor Plasma Spraying: Modeling the Interactions between the Transient Plasma Jet and the Droplets

Mathematical Modeling of Coating Under Shock Loading of Nanopowder Layer

S. Kiselev; V. Kiselev

ITSC 2007; 202-206https://doi.org/10.31399/asm.cp.itsc2007p0202

View Articletitled, Mathematical Modeling of Coating Under Shock Loading of Nanopowder Layer

Predicting Splat Morphology in a Thermal Spray Process

R. Dhiman; S. Chandra

ITSC 2007; 207-212https://doi.org/10.31399/asm.cp.itsc2007p0207

View Articletitled, Predicting Splat Morphology in a Thermal Spray Process

Numerical Simulation of Droplet Impact on Patterned Surfaces

H.B. Parizi; L. Rosenzweig; J. Mostaghimi; S. Chandra; T. Coyle; H. Salimi; L. Pershin; A. McDonald; C. Moreau

ITSC 2007; 213-218https://doi.org/10.31399/asm.cp.itsc2007p0213

View Articletitled, Numerical Simulation of Droplet Impact on Patterned Surfaces

Numerical and Experimental Study of Ni-Particle Impact on a Ti-Surface

M.F. Bahbou; I. Choquet; P. Nylén

ITSC 2007; 219-224https://doi.org/10.31399/asm.cp.itsc2007p0219

View Articletitled, Numerical and Experimental Study of Ni-Particle Impact on a Ti-Surface

Mechanism Underlying Anelastic Properties of Thermal Spray Coating

Y. Liu; T. Nakamura; V. Srinivasan; A. Gouldstone; S. Sampath

ITSC 2007; 225-229https://doi.org/10.31399/asm.cp.itsc2007p0225

View Articletitled, Mechanism Underlying Anelastic Properties of Thermal Spray Coating

Molecular Dynamics Simulation of Flattening Process of a High-Temperature, High-Speed Droplet: Influence of Impact Parameters

J. Shimizu; E. Ohmura; Y. Kobayashi; S. Kiyoshima; H. Eda

ITSC 2007; 230-235https://doi.org/10.31399/asm.cp.itsc2007p0230

View Articletitled, Molecular Dynamics Simulation of Flattening Process of a High-Temperature, High-Speed Droplet: Influence of Impact Parameters

Modeling Vapor Deposition Assisted by Thermal Plasma

S. Cartel; S. Bansard; G. Mariaux; A. Vardelle; M. Vardelle; J. Menuey

ITSC 2007; 236-241https://doi.org/10.31399/asm.cp.itsc2007p0236

View Articletitled, Modeling Vapor Deposition Assisted by Thermal Plasma

A New Concept of the Application of Shock Wave Technology in the Cold Gas Dynamic Spray Process

K. Bobzin; E. Lugscheider; R. Nickel; D. Parkot; W. Varava; H. Olivier; X. Luo

ITSC 2007; 242-247https://doi.org/10.31399/asm.cp.itsc2007p0242

View Articletitled, A New Concept of the Application of Shock Wave Technology in the Cold Gas Dynamic Spray Process

Modeling on Deformation Behavior of Al Particles Impacting on Al Substrate and Effect of Surface Oxide Films on Interfacial Bonding in Cold Spraying

W.-Y. Li; H. Liao; C. Coddet; C.-J. Li; H.-S. Bang

ITSC 2007; 248-253https://doi.org/10.31399/asm.cp.itsc2007p0248

View Articletitled, Modeling on Deformation Behavior of Al Particles Impacting on Al Substrate and Effect of Surface Oxide Films on Interfacial Bonding in Cold Spraying

Simulation on Controllable-Porosity Coating by Plasma Spray

H.O. Zhang; B.Y. Hu; G.L. Wang

ITSC 2007; 254-259https://doi.org/10.31399/asm.cp.itsc2007p0254

View Articletitled, Simulation on Controllable-Porosity Coating by Plasma Spray

Influence of Droplet Breakup and Collision in the Solution Precursor Plasma Spraying Process

Y. Shan; T.W. Coyle; J. Mostaghimi

ITSC 2007; 260-265https://doi.org/10.31399/asm.cp.itsc2007p0260

View Articletitled, Influence of Droplet Breakup and Collision in the Solution Precursor Plasma Spraying Process

Comparison of Molecular and Argon Gases for Plasma Spraying

L. Pershin; L. Chen; J. Mostaghimi

ITSC 2007; 266-269https://doi.org/10.31399/asm.cp.itsc2007p0266

View Articletitled, Comparison of Molecular and Argon Gases for Plasma Spraying

Fast Modeling of Phase Changes in a Particle Injected Within a dc Plasma Jet

F. Ben Ettouil; B. Pateyron; H. Ageorges; M. El Ganaoui; P. Fauchais; O. Mazhorova

ITSC 2007; 270-275https://doi.org/10.31399/asm.cp.itsc2007p0270

View Articletitled, Fast Modeling of Phase Changes in a Particle Injected Within a dc Plasma Jet

Applications and Case Studies

Importance of Surface Preparation Technology Prior to Coating Deposition on Cylinder Bores for High Performance Engines

G. Barbezat

ITSC 2007; 276-280https://doi.org/10.31399/asm.cp.itsc2007p0276

View Articletitled, Importance of Surface Preparation Technology Prior to Coating Deposition on Cylinder Bores for High Performance Engines

Development of Superabrasive Composite Layers through Thermo-Kinetic Coating-Technologies

W. Tillmann; J. Nebel; E. Vogli

ITSC 2007; 281-286https://doi.org/10.31399/asm.cp.itsc2007p0281

View Articletitled, Development of Superabrasive Composite Layers through Thermo-Kinetic Coating-Technologies

Several Application Cases of Thermal Spraying Technology on Industrial Components and Its Considerations

X.O. Huang; R.J. Wang; T.-J. Zhang; H.J. Luo; Y.F. Lű

ITSC 2007; 287-290https://doi.org/10.31399/asm.cp.itsc2007p0287

View Articletitled, Several Application Cases of Thermal Spraying Technology on Industrial Components and Its Considerations

Thermal Spraying Technology and Its Applications in the Iron & Steel Industry in China

R.L. Hao

ITSC 2007; 291-296https://doi.org/10.31399/asm.cp.itsc2007p0291

View Articletitled, Thermal Spraying Technology and Its Applications in the Iron & Steel Industry in China

Effect of Microstructure of HVOF-Sprayed WC-Co Coatings on Their Mechanical Properties

P. Chivavibul; M. Watanabe; S. Kuroda

ITSC 2007; 297-302https://doi.org/10.31399/asm.cp.itsc2007p0297

View Articletitled, Effect of Microstructure of HVOF-Sprayed WC-Co Coatings on Their Mechanical Properties

Study on Cold Spraying of Al-based Brazing Alloys

E. Lugscheider; K. Bobzin; L. Zhao; F. Ernst; J. Zwick

ITSC 2007; 303-308https://doi.org/10.31399/asm.cp.itsc2007p0303

View Articletitled, Study on Cold Spraying of Al-based Brazing Alloys

Manufacturing Solid Oxide Fuel Cells with an Axial-injection Plasma Spray System

Z. Tang; A. Burgess; O. Kesler; B. White; N. Ben-Oved

ITSC 2007; 309-312https://doi.org/10.31399/asm.cp.itsc2007p0309

View Articletitled, Manufacturing Solid Oxide Fuel Cells with an Axial-injection Plasma Spray System

Thermoelectric Device Fabricated by Plasma Spray

S. Sodeoka; M. Suzuki; T. Inoue; J. Rückriem

ITSC 2007; 313-318https://doi.org/10.31399/asm.cp.itsc2007p0313

View Articletitled, Thermoelectric Device Fabricated by Plasma Spray

Investigation about the Chrome Steel Wire Arc Spray Process and the Resulting Coating Properties

J. Wilden; J.P. Bergmann; S. Jahn; S. Knapp; F. van Rodijnen; G. Fisher

ITSC 2007; 319-323https://doi.org/10.31399/asm.cp.itsc2007p0319

View Articletitled, Investigation about the Chrome Steel Wire Arc Spray Process and the Resulting Coating Properties

Thermal Spray Technology Trends for Patent Applications in Japan

K. Tani; Y. Namba; A. Nakahira

ITSC 2007; 324-328https://doi.org/10.31399/asm.cp.itsc2007p0324

View Articletitled, Thermal Spray Technology Trends for Patent Applications in Japan

Digital Fabrication of Functionally Graded PEN for SOFC by APS

H.O. Zhang; Y.Z. Yang; G.L. Wang; D.W. Sun

ITSC 2007; 329-334https://doi.org/10.31399/asm.cp.itsc2007p0329

View Articletitled, Digital Fabrication of Functionally Graded PEN for SOFC by APS

Study of Aluminium Oxidation Induced by a Q-switched Nd:YAG Laser Treatment and Its Influence on the Adhesion Properties of a Plasma-Sprayed Alumina Coating

V. Barnier; S. Costil; H. Li; C. Coddet; R. Oltra

ITSC 2007; 335-340https://doi.org/10.31399/asm.cp.itsc2007p0335

View Articletitled, Study of Aluminium Oxidation Induced by a Q-switched Nd:YAG Laser Treatment and Its Influence on the Adhesion Properties of a Plasma-Sprayed Alumina Coating

Microstructures and Compositions of Photocatalytic Plasma-Sprayed Titania-Hydroxyapatite Coatings

F.-X. Ye; A. Ohmori; T. Tsumura; K. Nakata; C.-J. Li

ITSC 2007; 341-346https://doi.org/10.31399/asm.cp.itsc2007p0341

View Articletitled, Microstructures and Compositions of Photocatalytic Plasma-Sprayed Titania-Hydroxyapatite Coatings

Arc Spraying

Optimization of a Rotating Twin Wire-Arc Spray Gun

R. Bolot; H. Liao; C. Mateus; C. Coddet; J.M. Bordes

ITSC 2007; 347-352https://doi.org/10.31399/asm.cp.itsc2007p0347

View Articletitled, Optimization of a Rotating Twin Wire-Arc Spray Gun

New Process Adapted Power Supplies for Wire Arc Spraying

S. Knapp; F. van Rodijnen; G. Fischer

ITSC 2007; 353-358https://doi.org/10.31399/asm.cp.itsc2007p0353

View Articletitled, New Process Adapted Power Supplies for Wire Arc Spraying

A New Method for the Production of Particle Reinforced Coatings

J. Wilden; J.P. Bergmann; S. Jahn; S. Reich; S. Knapp; F. van Rodijnen; G. Fischer

ITSC 2007; 359-364https://doi.org/10.31399/asm.cp.itsc2007p0359

View Articletitled, A New Method for the Production of Particle Reinforced Coatings

Effects of Powder Size in Cored Wire on Arc-Sprayed Metal-Ceramic Coatings

J.J. Fang; Z.X. Li; M. Qian; C.L. Ren; Y.W. Shi

ITSC 2007; 365-370https://doi.org/10.31399/asm.cp.itsc2007p0365

View Articletitled, Effects of Powder Size in Cored Wire on Arc-Sprayed Metal-Ceramic Coatings

Biomedical Coatings

Plasma Sprayed Biocompatible Coatings on PEEK Implants

S. Beauvais; O. Decaux

ITSC 2007; 371-376https://doi.org/10.31399/asm.cp.itsc2007p0371

View Articletitled, Plasma Sprayed Biocompatible Coatings on PEEK Implants

Plasma-Sprayed Calcium Oxide Stabilized Zirconia Coatings for Biomedical Application

G.C. Wang; X.Y. Liu; C.X. Ding

ITSC 2007; 377-380https://doi.org/10.31399/asm.cp.itsc2007p0377

View Articletitled, Plasma-Sprayed Calcium Oxide Stabilized Zirconia Coatings for Biomedical Application

Apatite Formation on Vacuum Plasma Sprayed Titanium Coating after Chemical Modification

Y.K. Chen; H. Ji; X.B. Zheng

ITSC 2007; 381-384https://doi.org/10.31399/asm.cp.itsc2007p0381

View Articletitled, Apatite Formation on Vacuum Plasma Sprayed Titanium Coating after Chemical Modification

Influence of H₂SO₄ Treatment on Biological Properties of Plasma Sprayed Titania Coatings

B. Li; X. Li; X. Zhao; C. Ding

ITSC 2007; 385-388https://doi.org/10.31399/asm.cp.itsc2007p0385

View Articletitled, Influence of H<sub>2</sub>SO<sub>4</sub> Treatment on Biological Properties of Plasma Sprayed Titania Coatings

In Vitro Durability of Titanium/Dicalcium Silicate Composite Coatings

Y.T. Xie; X.B. Zheng; X.Y. Liu; C.X. Ding

ITSC 2007; 389-392https://doi.org/10.31399/asm.cp.itsc2007p0389

View Articletitled, In Vitro Durability of Titanium/Dicalcium Silicate Composite Coatings

Bioactivity of Plasma Sprayed Calcium Silicate/ZrO₂ Composite Coatings

X. Liu; Y. Xie; C. Ding

ITSC 2007; 393-396https://doi.org/10.31399/asm.cp.itsc2007p0393

View Articletitled, Bioactivity of Plasma Sprayed Calcium Silicate/ZrO<sub>2</sub> Composite Coatings

Preparation, Microstructure and Bioactivity of Plasma-Sprayed TiO₂ Coating

X. Zhao; Z. Chen; X. Liu; C. Ding

ITSC 2007; 397-400https://doi.org/10.31399/asm.cp.itsc2007p0397

View Articletitled, Preparation, Microstructure and Bioactivity of Plasma-Sprayed TiO<sub>2</sub> Coating

Progress in Plasma Sprayed Bioceramic Coatings

C. Ding

ITSC 2007; 401-404https://doi.org/10.31399/asm.cp.itsc2007p0401

View Articletitled, Progress in Plasma Sprayed Bioceramic Coatings

Ceramics and Thermal Barrier Coatings

Processing and Properties of Yttria-Stabilized Zirconia TBCs Produced Using Nitrogen as Primary Plasma Gas

B.R. Marple; R.S. Lima; C. Moreau; S.E. Kruger; L. Xie; M. Dorfman

ITSC 2007; 405-410https://doi.org/10.31399/asm.cp.itsc2007p0405

View Articletitled, Processing and Properties of Yttria-Stabilized Zirconia TBCs Produced Using Nitrogen as Primary Plasma Gas

Effect of Heat Treatment on Pore Architecture and Associated Property Changes in Plasma Sprayed TBCs

S. Paul; I.O. Golosnoy; A. Cipitria; T.W. Clyne; L. Xie; M.R. Dorfman

ITSC 2007; 411-416https://doi.org/10.31399/asm.cp.itsc2007p0411

View Articletitled, Effect of Heat Treatment on Pore Architecture and Associated Property Changes in Plasma Sprayed TBCs

Influence of Microstructure on the Thermal Cycling Performance of Thermal Barrier Coatings

R. Vaßen; D. Stöver

ITSC 2007; 417-422https://doi.org/10.31399/asm.cp.itsc2007p0417

View Articletitled, Influence of Microstructure on the Thermal Cycling Performance of Thermal Barrier Coatings

Properties and Performance of High Purity Thermal Barrier Coatings

L. Xie; M.R. Dorfman; A. Cipitria; S. Paul; I.O. Golosnoy; T.W. Clyne

ITSC 2007; 423-427https://doi.org/10.31399/asm.cp.itsc2007p0423

View Articletitled, Properties and Performance of High Purity Thermal Barrier Coatings

Effect of Thermal Spray Condition on Characterization of Thermal Barrier Coating

M. Arai; E. Wada; K. Kishimoto; N. Ohno

ITSC 2007; 428-433https://doi.org/10.31399/asm.cp.itsc2007p0428

View Articletitled, Effect of Thermal Spray Condition on Characterization of Thermal Barrier Coating

Sintering Kinetics of Plasma-Sprayed Zirconia TBCs

A. Cipitria; I.O. Golosnoy; T.W. Clyne

ITSC 2007; 434-439https://doi.org/10.31399/asm.cp.itsc2007p0434

View Articletitled, Sintering Kinetics of Plasma-Sprayed Zirconia TBCs

Thermal Fatigue Behaviour of Thick and Porous Thermal Barrier Coatings Systems

A. Scrivani; G. Rizzi; U. Bardi; C. Giolli; M. Muniz Miranda; S. Ciattini; A. Fossati; F. Borgioli

ITSC 2007; 440-445https://doi.org/10.31399/asm.cp.itsc2007p0440

View Articletitled, Thermal Fatigue Behaviour of Thick and Porous Thermal Barrier Coatings Systems

The Growth and Influence of Thermally Grown Oxide in a Thermal Barrier Coating

X.J. Wu; W.R. Chen; P.C. Patnaik

ITSC 2007; 446-451https://doi.org/10.31399/asm.cp.itsc2007p0446

View Articletitled, The Growth and Influence of Thermally Grown Oxide in a Thermal Barrier Coating

Microstructure and Thermal Cycling Behaviors of Thermal Barrier Coatings on Near-α Titanium Alloy

B. He; F. Li; H. Zhou; Y. Dai; B. Sun

ITSC 2007; 452-456https://doi.org/10.31399/asm.cp.itsc2007p0452

View Articletitled, Microstructure and Thermal Cycling Behaviors of Thermal Barrier Coatings on Near-α Titanium Alloy

Preliminary Study of Oxidation Behavior of Cold Sprayed Nanostructured NiCrAlY Bond Coatings

Q. Zhang; C.-J. Li; C.-X. Li; G.-J. Yang; X.-R. Wang; H.-T. Wang; S.-C. Lui

ITSC 2007; 457-462https://doi.org/10.31399/asm.cp.itsc2007p0457

View Articletitled, Preliminary Study of Oxidation Behavior of Cold Sprayed Nanostructured NiCrAlY Bond Coatings

Making Dense Coatings with the Solution Precursor Plasma Spray Process

E.H. Jordan; M. Gell; P. Bonzani; D. Chen; S. Basu; B. Cetegen; F. Wu; X. Ma

ITSC 2007; 463-467https://doi.org/10.31399/asm.cp.itsc2007p0463

View Articletitled, Making Dense Coatings with the Solution Precursor Plasma Spray Process

The Effect of Nanostructured YPSZ Coating Microstructure on the Thermal Conductivity

Q.S. Wang; F.C. Wang; Y.B. Liu; Z. Ma

ITSC 2007; 468-471https://doi.org/10.31399/asm.cp.itsc2007p0468

View Articletitled, The Effect of Nanostructured YPSZ Coating Microstructure on the Thermal Conductivity

Evaluation of Adhesion/Cohesion of Plasma Sprayed Ceramic Coatings by Scratch Testing

C.X. Ding

ITSC 2007; 472-477https://doi.org/10.31399/asm.cp.itsc2007p0472

View Articletitled, Evaluation of Adhesion/Cohesion of Plasma Sprayed Ceramic Coatings by Scratch Testing

Improvement of Plasma Sprayed Yttria Stabilized Zirconia (YSZ) Electrolytes for Solid Oxide Fuel Cells by Spin Coated Sol Gel Solutions

L. Rose; Z. Tang; A. Burgess; O. Kesler

ITSC 2007; 478-483https://doi.org/10.31399/asm.cp.itsc2007p0478

View Articletitled, Improvement of Plasma Sprayed Yttria Stabilized Zirconia (YSZ) Electrolytes for Solid Oxide Fuel Cells by Spin Coated Sol Gel Solutions

Nanostructured Ceramic HVOF Coatings for Improved Protection

E. Turunen; U. Kanerva; T. Varis; J. Knuuttila; J. Leivo; J. Silvonen

ITSC 2007; 484-488https://doi.org/10.31399/asm.cp.itsc2007p0484

View Articletitled, Nanostructured Ceramic HVOF Coatings for Improved Protection

About the Dependence of the Stabilization of α-Alumina on the Spray Process

C.C. Stahr; S. Saaro; L.-M. Berger; J. Dubský; K. Neufuss

ITSC 2007; 489-494https://doi.org/10.31399/asm.cp.itsc2007p0489

View Articletitled, About the Dependence of the Stabilization of α-Alumina on the Spray Process

Processing and Properties of Advanced Ceramic Abradable Coatings

D. Sporer; M. Dorfman; L. Xie; A. Refke; I. Giovannetti; M. Giannozzi

ITSC 2007; 495-500https://doi.org/10.31399/asm.cp.itsc2007p0495

View Articletitled, Processing and Properties of Advanced Ceramic Abradable Coatings

Evaluation of APS YPSZ Powder and Coating Homogeneity: XRD and Raman Spectroscopy Studies

K.J. Lawson; L.J. Ritchie; L. Xie; M.R. Dorfman

ITSC 2007; 501-506https://doi.org/10.31399/asm.cp.itsc2007p0501

View Articletitled, Evaluation of APS YPSZ Powder and Coating Homogeneity: XRD and Raman Spectroscopy Studies

Electromagnetic and Mechanical Properties of Silica - Aluminosilicates Plasma Sprayed Composite Coatings

F. Cipri; C. Bartuli; T. Valente; F. Casadei

ITSC 2007; 507-512https://doi.org/10.31399/asm.cp.itsc2007p0507

View Articletitled, Electromagnetic and Mechanical Properties of Silica - Aluminosilicates Plasma Sprayed Composite Coatings

Durability of HVOF Sprayed MoB/CoCr Coating on the 316L Stainless Substrate in Molten 55%Al-Zn-1.5%Si Bath

H.P. Lv; J. Wang; C.S. Zhai; F. Li; B.D. Sun

ITSC 2007; 513-517https://doi.org/10.31399/asm.cp.itsc2007p0513

View Articletitled, Durability of HVOF Sprayed MoB/CoCr Coating on the 316L Stainless Substrate in Molten 55%Al-Zn-1.5%Si Bath

Thermal Shock Behavior of the Supersonic Plasma Sprayed CeO₂-Y₂O₃-ZrO₂ Functionally Graded TBC

Z.H. Han; H.J. Wang; Y.B. Guo

ITSC 2007; 518-522https://doi.org/10.31399/asm.cp.itsc2007p0518

View Articletitled, Thermal Shock Behavior of the Supersonic Plasma Sprayed CeO<sub>2</sub>-Y<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub> Functionally Graded TBC

Zircon-Based Ceramics Composite Coating for Environmental Barrier Coating

M. Suzuki; S. Sodeoka; T. Inoue

ITSC 2007; 523-527https://doi.org/10.31399/asm.cp.itsc2007p0523

View Articletitled, Zircon-Based Ceramics Composite Coating for Environmental Barrier Coating

Study of Microstructure, Vickers Microindentation and Microhardness Distribution of HVOF Sprayed Composite MoB/CoCr Coating

H.P. Lv; J. Wang; C.S. Zhai; F. Li; B.D. Sun

ITSC 2007; 528-532https://doi.org/10.31399/asm.cp.itsc2007p0528

View Articletitled, Study of Microstructure, Vickers Microindentation and Microhardness Distribution of HVOF Sprayed Composite MoB/CoCr Coating

On the Role of Spraying Process on Microstructural, Mechanical and Thermal Response of Alumina Coatings

S. Costil; C. Verdy; R. Bolot; C. Coddet

ITSC 2007; 533-537https://doi.org/10.31399/asm.cp.itsc2007p0533

View Articletitled, On the Role of Spraying Process on Microstructural, Mechanical and Thermal Response of Alumina Coatings

Corrosion Protection

Oxidation and Hot Corrosion Resistance of HVOF Wc-NiCrFeSiB Coating on Ni- and Fe-based Superalloys at 800 °C

T.S. Sidhu; A. Malik; S. Prakash; R.D. Agrawal

ITSC 2007; 538-542https://doi.org/10.31399/asm.cp.itsc2007p0538

View Articletitled, Oxidation and Hot Corrosion Resistance of HVOF Wc-NiCrFeSiB Coating on Ni- and Fe-based Superalloys at 800 °C

Study on Corrosion Resistance Properties of Al-based Coating Prepared by Arc Spraying

C.L. Ren; Q. Wei; J.Y. Fang; Z.X. Li; X.J. Zhou

ITSC 2007; 543-548https://doi.org/10.31399/asm.cp.itsc2007p0543

View Articletitled, Study on Corrosion Resistance Properties of Al-based Coating Prepared by Arc Spraying

Corrosion Study of Cold Sprayed Aluminum Coatings onto Al 7075 Alloy

E. Irissou; B. Arsenault

ITSC 2007; 549-554https://doi.org/10.31399/asm.cp.itsc2007p0549

View Articletitled, Corrosion Study of Cold Sprayed Aluminum Coatings onto Al 7075 Alloy

Properties of HVOF Sprayed Ferrous Coatings for Corrosion Protection

K. Bobzin; E. Lugscheider; F. Ernst; G. Hidalgo; J. Zwick

ITSC 2007; 555-560https://doi.org/10.31399/asm.cp.itsc2007p0555

View Articletitled, Properties of HVOF Sprayed Ferrous Coatings for Corrosion Protection

Corrosion Behavior of Arc Spraying Nickel Based Coating

D.-Y. He; N. Dong; J.-M. Jiang

ITSC 2007; 561-566https://doi.org/10.31399/asm.cp.itsc2007p0561

View Articletitled, Corrosion Behavior of Arc Spraying Nickel Based Coating

HVOF Coatings of MoB/CoCr Against Erosion by Molten Al-Zn Alloy

H. Mizuno; S. Tawada; I. Aoki; J. Kitamura

ITSC 2007; 567-571https://doi.org/10.31399/asm.cp.itsc2007p0567

View Articletitled, HVOF Coatings of MoB/CoCr Against Erosion by Molten Al-Zn Alloy

High Velocity Oxyfuel Thermal Spraying

Comparison of Operating Characteristics for Gas and Liquid Fuel HVOF Torches

W. Rusch

ITSC 2007; 572-576https://doi.org/10.31399/asm.cp.itsc2007p0572

View Articletitled, Comparison of Operating Characteristics for Gas and Liquid Fuel HVOF Torches

Development and Application of DZ9000E Portable HVOF System

R.J. Wang; L. Xu; T.J. Zhang; X.O. Huang; H.J. Luo

ITSC 2007; 577-581https://doi.org/10.31399/asm.cp.itsc2007p0577

View Articletitled, Development and Application of DZ9000E Portable HVOF System

Analysis of In-Flight Particle Properties of Ultrafine Powders

K. Bobzin; F. Ernst; J. Zwick; M. Brühl; G. Matthäus

ITSC 2007; 582-587https://doi.org/10.31399/asm.cp.itsc2007p0582

View Articletitled, Analysis of In-Flight Particle Properties of Ultrafine Powders

Characterization of Adhesion Strength and Residual Stresses of HVOF Sprayed Inconel 718 for Aerospace Repair Applications

C. Lyphout; P. Nylén; J. Wigren

ITSC 2007; 588-593https://doi.org/10.31399/asm.cp.itsc2007p0588

View Articletitled, Characterization of Adhesion Strength and Residual Stresses of HVOF Sprayed Inconel 718 for Aerospace Repair Applications

The Oxy-Fuel Ionisation (OFI) Spray Processes

G. Barykin; M. Parco

ITSC 2007; 594-599https://doi.org/10.31399/asm.cp.itsc2007p0594

View Articletitled, The Oxy-Fuel Ionisation (OFI) Spray Processes

Repeatability of Measuring Method for HVOF Application

C. Malavolta; H. Liao; Ga Zhang; C. Coddet; S. Keller; B. Hansz

ITSC 2007; 600-603https://doi.org/10.31399/asm.cp.itsc2007p0600

View Articletitled, Repeatability of Measuring Method for HVOF Application

Nanostructured Materials

Characterization and Evaluation of Nanostructured Bond Coats from Noncryogenically Milled Feedstock

G.E. Kim; T. Addona; P. Richer; B. Jodoin; A. Al-Mathami; M. Brochu

ITSC 2007; 604-609https://doi.org/10.31399/asm.cp.itsc2007p0604

View Articletitled, Characterization and Evaluation of Nanostructured Bond Coats from Noncryogenically Milled Feedstock

Microstructure Characterization and Property of Plasma Sprayed Nanostructured TBCs

Q. Li; S. Li; W. Yang

ITSC 2007; 610-614https://doi.org/10.31399/asm.cp.itsc2007p0610

View Articletitled, Microstructure Characterization and Property of Plasma Sprayed Nanostructured TBCs

Development of Nanostructured Thermal Barrier Coatings

X.L. Jiang; C.B. Liu; F. Lin

ITSC 2007; 615-620https://doi.org/10.31399/asm.cp.itsc2007p0615

View Articletitled, Development of Nanostructured Thermal Barrier Coatings

Influence of Plasma Instabilities in Ceramic Suspension Plasma Spraying

R. Etchart-Salas; V. Rat; J.F. Coudert; P. Fauchais

ITSC 2007; 621-626https://doi.org/10.31399/asm.cp.itsc2007p0621

View Articletitled, Influence of Plasma Instabilities in Ceramic Suspension Plasma Spraying

Mechanical and Thermal Transport Properties of Suspension Thermal Sprayed Alumina-Zirconia Composite Coatings

J. Oberste Berghaus; J.-G. Legoux; C. Moreau; F. Tarasi; T. Chráska

ITSC 2007; 627-632https://doi.org/10.31399/asm.cp.itsc2007p0627

View Articletitled, Mechanical and Thermal Transport Properties of Suspension Thermal Sprayed Alumina-Zirconia Composite Coatings

Resistance of HVOF Nanostructured WC-12Co Coatings to Cavitation Erosion

Z. Ding; Y. Zhang; H. Zhao

ITSC 2007; 633-637https://doi.org/10.31399/asm.cp.itsc2007p0633

View Articletitled, Resistance of HVOF Nanostructured WC-12Co Coatings to Cavitation Erosion

HVOF-Sprayed Al₂O₃-TiO₂ Coatings Using Hybrid (Nano+Submicron) Powders: An Enhanced Wear Performance

R.S. Lima; C. Moreau; B.R. Marple

ITSC 2007; 638-643https://doi.org/10.31399/asm.cp.itsc2007p0638

View Articletitled, HVOF-Sprayed Al<sub>2</sub>O<sub>3</sub>-TiO<sub>2</sub> Coatings Using Hybrid (Nano+Submicron) Powders: An Enhanced Wear Performance

Influence of Annealing Treatment on the Photocatalytic Performance of the Nanostructured TiO₂ Coating Deposited by Vacuum Cold Spray

G.-J. Yang; C.-J. Li; S.-Q. Fan; L.-Z. Zhang; C.-X. Li; Y.-Y. Wang

ITSC 2007; 644-649https://doi.org/10.31399/asm.cp.itsc2007p0644

View Articletitled, Influence of Annealing Treatment on the Photocatalytic Performance of the Nanostructured TiO<sub>2</sub> Coating Deposited by Vacuum Cold Spray

Liquid Precursors Plasma Spraying of TiO₂ and Ce- Doped Ba(Zr_0.2Ti_0.8)O₃ Coatings

E. García; Z.B. Zhang; T.W. Coyle; S.E. Hao; S.L. Mu

ITSC 2007; 650-654https://doi.org/10.31399/asm.cp.itsc2007p0650

View Articletitled, Liquid Precursors Plasma Spraying of TiO<sub>2</sub> and Ce- Doped Ba(Zr<sub>0.2</sub>Ti<sub>0.8</sub>)O<sub>3</sub> Coatings

Influence of Silver Doping on Photocatalytic Activity of Liquid Flame Sprayed Nanostructured TiO₂ Coating

G.-J. Yang; C.-J. Li; X.-C. Huang; Y.-Y. Wang; C.-X. Li

ITSC 2007; 655-659https://doi.org/10.31399/asm.cp.itsc2007p0655

View Articletitled, Influence of Silver Doping on Photocatalytic Activity of Liquid Flame Sprayed Nanostructured TiO<sub>2</sub> Coating

Deposition and Characterization of WC–Co Coatings Prepared by Continuous- and Pulsed-Cold Spray Processes

M. Yandouzi; E. Sansoucy; P. Richer; B. Jodoin; L. Ajdelsztajn

ITSC 2007; 660-665https://doi.org/10.31399/asm.cp.itsc2007p0660

View Articletitled, Deposition and Characterization of WC–Co Coatings Prepared by Continuous- and Pulsed-Cold Spray Processes

Rapid and Continuous Deposition of Porous Nanocrystalline SnO₂ Coating with Interpenetrating Pores for Gas Sensor Applications

K. Chien; T. Coyle

ITSC 2007; 666-670https://doi.org/10.31399/asm.cp.itsc2007p0666

View Articletitled, Rapid and Continuous Deposition of Porous Nanocrystalline SnO<sub>2</sub> Coating with Interpenetrating Pores for Gas Sensor Applications

Nanostructured Plasma Sprayed Anodes for Solid Oxide Fuel Cells

A.A. Syed; Z. Ilhan

ITSC 2007; 671-676https://doi.org/10.31399/asm.cp.itsc2007p0671

View Articletitled, Nanostructured Plasma Sprayed Anodes for Solid Oxide Fuel Cells

Suspension Plasma Spraying of Solid Oxide Fuel Cell Electrolytes

D. Waldbillig; O. Kesler; Z. Tang; A. Burgess

ITSC 2007; 677-682https://doi.org/10.31399/asm.cp.itsc2007p0677

View Articletitled, Suspension Plasma Spraying of Solid Oxide Fuel Cell Electrolytes

Fabrication of Nano-TiO₂ Coating for Dye-sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

S.-Q. Fan; C.-J Li; G.-J. Yang; L.-Z. Zhang; J.-C. Gao; Y.-X. Xi

ITSC 2007; 683-687https://doi.org/10.31399/asm.cp.itsc2007p0683

View Articletitled, Fabrication of Nano-TiO<sub>2</sub> Coating for Dye-sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

Plasma Spraying

Development of Process Maps for Coating Evaluation for High Velocity Plasma

R. Molz; R. McCullough; D. Hawley

ITSC 2007; 688-693https://doi.org/10.31399/asm.cp.itsc2007p0688

View Articletitled, Development of Process Maps for Coating Evaluation for High Velocity Plasma

Reactive Plasma Spraying of Fine Feedstock Powders for Fabrication of Nitride Ceramic Coatings

M. Yamada; Y. Kouzaki; T. Yasui; M. Fukumoto; K. Takahashi

ITSC 2007; 694-698https://doi.org/10.31399/asm.cp.itsc2007p0694

View Articletitled, Reactive Plasma Spraying of Fine Feedstock Powders for Fabrication of Nitride Ceramic Coatings

Solution Precursor Plasma Spray (SPPS) of Ni-YSZ SOFC Anode Coatings

T.W. Coyle; Y. Wang

ITSC 2007; 699-704https://doi.org/10.31399/asm.cp.itsc2007p0699

View Articletitled, Solution Precursor Plasma Spray (SPPS) of Ni-YSZ SOFC Anode Coatings

LPPS Thin Film: A Hybrid Coating Technology Between Thermal Spray and PVD for Functional Thin Coatings and Large Area Applications

A. Refke; M. Gindrat; K. von Niessen; R. Damani

ITSC 2007; 705-710https://doi.org/10.31399/asm.cp.itsc2007p0705

View Articletitled, LPPS Thin Film: A Hybrid Coating Technology Between Thermal Spray and PVD for Functional Thin Coatings and Large Area Applications

Effect of In-Flight Particle Velocity on the Performance of APS YSZ Electrolyte

C. Zhang; C.-J. Li; C.-X. Li; W. Gao; M. Planche; H. Liao; C. Coddet

ITSC 2007; 711-716https://doi.org/10.31399/asm.cp.itsc2007p0711

View Articletitled, Effect of In-Flight Particle Velocity on the Performance of APS YSZ Electrolyte

Experimental and Numerical Studies of Plasma Forming Process Parameters Effect on Optimum Particle Impact Locations

W. Zhang; S. Sampath; L.L. Zheng

ITSC 2007; 717-722https://doi.org/10.31399/asm.cp.itsc2007p0717

View Articletitled, Experimental and Numerical Studies of Plasma Forming Process Parameters Effect on Optimum Particle Impact Locations

Triplex Pro 200 – Potential and Advanced Applications

K. Bobzin; F. Ernst; J. Zwick; K. Richardt; D. Sporer; R.J. Molz

ITSC 2007; 723-726https://doi.org/10.31399/asm.cp.itsc2007p0723

View Articletitled, Triplex Pro 200 – Potential and Advanced Applications

Induction Plasma Deposition of Refractory Metal: Processing Parameters Optimization

X. Fan; M. Boulos; G. Masini; O. Kovářík; J. Bensch

ITSC 2007; 727-732https://doi.org/10.31399/asm.cp.itsc2007p0727

View Articletitled, Induction Plasma Deposition of Refractory Metal: Processing Parameters Optimization

Fe-base Metal Glass Coating Produced by Gas Tunnel Type Plasma Spraying

A. Kobayashi; S. Yano; H. Kimura; A. Inoue

ITSC 2007; 733-737https://doi.org/10.31399/asm.cp.itsc2007p0733

View Articletitled, Fe-base Metal Glass Coating Produced by Gas Tunnel Type Plasma Spraying

To Achieve Epitaxy Thermal Spraying by Substrate Melting

G. Wei; M. Zhang; W. Zhang; H. Zhang; L. Zhang; S. Sampath

ITSC 2007; 738-743https://doi.org/10.31399/asm.cp.itsc2007p0738

View Articletitled, To Achieve Epitaxy Thermal Spraying by Substrate Melting

Fragmentation and Splashing of Plasma-Sprayed Nickel on Oxidized Metals

A. McDonald; S. Chandra; M. Lamontagne; C. Moreau

ITSC 2007; 744-749https://doi.org/10.31399/asm.cp.itsc2007p0744

View Articletitled, Fragmentation and Splashing of Plasma-Sprayed Nickel on Oxidized Metals

Microstructure Control of NiO(Graphite)/8YSZ SOFC Anode Coatings by Atmospheric Plasma (APS)

O.C. Kwon; C. Lee; S.Y. Hwang

ITSC 2007; 750-755https://doi.org/10.31399/asm.cp.itsc2007p0750

View Articletitled, Microstructure Control of NiO(Graphite)/8YSZ SOFC Anode Coatings by Atmospheric Plasma (APS)

Synthesis of Lanthanum Silicates with Apatite-type Structure by Atmospheric Plasma Spraying

W. Gao; C. Zhang; F. Lapostolle; H. Liao; C. Coddet; V. Ji

ITSC 2007; 756-759https://doi.org/10.31399/asm.cp.itsc2007p0756

View Articletitled, Synthesis of Lanthanum Silicates with Apatite-type Structure by Atmospheric Plasma Spraying

Operational Limitations of the iPro-90 Plasma Spray Gun

W. Rusch

ITSC 2007; 760-763https://doi.org/10.31399/asm.cp.itsc2007p0760

View Articletitled, Operational Limitations of the iPro-90 Plasma Spray Gun

Comparison of the Microstructures and Tribological Behavior of Blended and Nanostructured Composite Coatings by APS

J.H. Cho; Y.M. Xiong; S. Kumar; Y.G. Ji; C. Lee; S.Y. Hwang

ITSC 2007; 764-769https://doi.org/10.31399/asm.cp.itsc2007p0764

View Articletitled, Comparison of the Microstructures and Tribological Behavior of Blended and Nanostructured Composite Coatings by APS

Transition Curvature in Flattening Behavior of Plasma Sprayed Metallic Materials

M. Fukumoto; T. Yamaguchi; M. Yamada; T. Yasui

ITSC 2007; 770-775https://doi.org/10.31399/asm.cp.itsc2007p0770

View Articletitled, Transition Curvature in Flattening Behavior of Plasma Sprayed Metallic Materials

Evaluation of Tungsten Carbide Coatings Sprayed with High Velocity Plasma Using a Process Map

R. McCullough; R. Molz; D. Hawley

ITSC 2007; 776-781https://doi.org/10.31399/asm.cp.itsc2007p0776

View Articletitled, Evaluation of Tungsten Carbide Coatings Sprayed with High Velocity Plasma Using a Process Map

Titanium Nitride Spraying Using Supersonic Nitrogen and Nitrogen/Hydrogen-Mixture Plasma Jets in Thermodynamic and Chemical Nonequilibrium State

H. Tahara; Y. Ando

ITSC 2007; 782-785https://doi.org/10.31399/asm.cp.itsc2007p0782

View Articletitled, Titanium Nitride Spraying Using Supersonic Nitrogen and Nitrogen/Hydrogen-Mixture Plasma Jets in Thermodynamic and Chemical Nonequilibrium State

Mechanical Properties of Plasma-Sprayed Hydroxyapatite Coating after Post Heat Treatment: Effect of Residual Stress

Y.C. Yang; E. Chang

ITSC 2007; 786-791https://doi.org/10.31399/asm.cp.itsc2007p0786

View Articletitled, Mechanical Properties of Plasma-Sprayed Hydroxyapatite Coating after Post Heat Treatment: Effect of Residual Stress

Fuzzy Logic Analysis of Alumina–Titania Deposition Yield During APS Process

A.F. Kanta; G. Montavon; M.P. Planche; C. Coddet

ITSC 2007; 792-797https://doi.org/10.31399/asm.cp.itsc2007p0792

View Articletitled, Fuzzy Logic Analysis of Alumina–Titania Deposition Yield During APS Process

Spraying Using Magneto-Plasma-Dynamic Arc Jet Generator

H. Tahara; Y. Ando

ITSC 2007; 798-802https://doi.org/10.31399/asm.cp.itsc2007p0798

View Articletitled, Spraying Using Magneto-Plasma-Dynamic Arc Jet Generator

Relation between the Arc Root Fluctuations, the Cold Boundary Layer Thickness and the Particle Thermal Treatment

E. Noguès; P. Fauchais; M. Vardelle; P. Granger

ITSC 2007; 803-808https://doi.org/10.31399/asm.cp.itsc2007p0803

View Articletitled, Relation between the Arc Root Fluctuations, the Cold Boundary Layer Thickness and the Particle Thermal Treatment

Thermal Spraying of Polymers

Submicron α-Fe/Nylon-12 Composite Absorber Coatings Produced by Low Temperature High Velocity Air Fuel Spray Technique

X. Yuan; H. Wang; G. Hou; B. Zha; L. Jiang

ITSC 2007; 809-813https://doi.org/10.31399/asm.cp.itsc2007p0809

View Articletitled, Submicron α-Fe/Nylon-12 Composite Absorber Coatings Produced by Low Temperature High Velocity Air Fuel Spray Technique

Sliding Wear Properties of HVOF Thermally Sprayed Nylon-11 and Nylon-11/Ceramic Composites on Steel

L. Jackson; M. Ivosevic; R. Knight; R.A. Cairncross

ITSC 2007; 814-819https://doi.org/10.31399/asm.cp.itsc2007p0814

View Articletitled, Sliding Wear Properties of HVOF Thermally Sprayed Nylon-11 and Nylon-11/Ceramic Composites on Steel

Melting and Degradation of Nylon-11 Particles During HVOF Combustion Spraying

M. Ivosevic; R.A. Cairncross; R. Knight

ITSC 2007; 820-825https://doi.org/10.31399/asm.cp.itsc2007p0820

View Articletitled, Melting and Degradation of Nylon-11 Particles During HVOF Combustion Spraying

Process Diagnostics, Sensors, and Control

Process Characterization of LPPS Thin Processes with Optical Diagnostics

M. Gindrat; A. Refke; R. Schmid

ITSC 2007; 826-831https://doi.org/10.31399/asm.cp.itsc2007p0826

View Articletitled, Process Characterization of LPPS Thin Processes with Optical Diagnostics

Optimization of Sensor Optics for Industrial Thermal Spray Sensors

J. Blain; L. Pouliot; F. Nadeau; M. Lamontagne; C. Moreau

ITSC 2007; 832-836https://doi.org/10.31399/asm.cp.itsc2007p0832

View Articletitled, Optimization of Sensor Optics for Industrial Thermal Spray Sensors

Influence of Atomization Gas on the Particle Formation During Arc Spraying with Cored Wires

W. Tillmann; E. Vogli; M. Abdulgader

ITSC 2007; 837-842https://doi.org/10.31399/asm.cp.itsc2007p0837

View Articletitled, Influence of Atomization Gas on the Particle Formation During Arc Spraying with Cored Wires

Change in Graphite Carbon Structure of Cast Iron Coatings through Different Spray Flame Situations

Y. Tsunekawa; T. Ueno; T. Kozaki; M. Okumiya; I. Ozdemir

ITSC 2007; 843-848https://doi.org/10.31399/asm.cp.itsc2007p0843

View Articletitled, Change in Graphite Carbon Structure of Cast Iron Coatings through Different Spray Flame Situations

Detection of Wear in One-Cathode Plasma Torch Electrodes and Its Impact on Velocity and Temperature of Injected Particles

G. Mauer; J.-L. Marqués; R. Vaßen; D. Stöver

ITSC 2007; 849-854https://doi.org/10.31399/asm.cp.itsc2007p0849

View Articletitled, Detection of Wear in One-Cathode Plasma Torch Electrodes and Its Impact on Velocity and Temperature of Injected Particles

Increase of Process Robustness through Offline Process Control and Noise Factor Influence Reduction

K. Bobzin; F. Ernst; J. Zwick; K. Richardt; R. Schmitt; J. Doeren

ITSC 2007; 855-859https://doi.org/10.31399/asm.cp.itsc2007p0855

View Articletitled, Increase of Process Robustness through Offline Process Control and Noise Factor Influence Reduction

Online Coating Thickness Monitoring: Conclusive Results from Early Industrial Implementations

A. Nadeau; L. Pouliot; F. Nadeau; J. Blain; S.A. Berube; C. Moreau; M. Lamontagne

ITSC 2007; 860-865https://doi.org/10.31399/asm.cp.itsc2007p0860

View Articletitled, Online Coating Thickness Monitoring: Conclusive Results from Early Industrial Implementations

Excellence in Robot Programming for Coating Applications

D.R. Moody

ITSC 2007; 866-871https://doi.org/10.31399/asm.cp.itsc2007p0866

View Articletitled, Excellence in Robot Programming for Coating Applications

A Novel Intelligent Adaptive Temperature Control Approach of Sprayed Coating for APS Process

W.S. Xia; H.O. Zhang; G.L. Wang

ITSC 2007; 872-877https://doi.org/10.31399/asm.cp.itsc2007p0872

View Articletitled, A Novel Intelligent Adaptive Temperature Control Approach of Sprayed Coating for APS Process

Properties, Characterization, and Testing

3D Visualization of Thermally Sprayed Microstructure

P. Ctibor; P. Hofmann; P. Chraska; R. Lechnerova; V. Benes

ITSC 2007; 878-883https://doi.org/10.31399/asm.cp.itsc2007p0878

View Articletitled, 3D Visualization of Thermally Sprayed Microstructure

Properties of Nanostructured WC-12Co Coatings Sprayed by HVOF

H. Zhao; Z. Ding; Y. Zhang; Q. Wang

ITSC 2007; 884-889https://doi.org/10.31399/asm.cp.itsc2007p0884

View Articletitled, Properties of Nanostructured WC-12Co Coatings Sprayed by HVOF

Spheroidization of Bioceramic Powders in a Radio Frequency Plasma

J.L. Xu; K.A. Khor; R. Kumar

ITSC 2007; 890-893https://doi.org/10.31399/asm.cp.itsc2007p0890

View Articletitled, Spheroidization of Bioceramic Powders in a Radio Frequency Plasma

Evaluation of Residual Stress for Plasma-Sprayed Plate Using Deflection Measurement

Y. Itoh; S. Suyama

ITSC 2007; 894-900https://doi.org/10.31399/asm.cp.itsc2007p0894

View Articletitled, Evaluation of Residual Stress for Plasma-Sprayed Plate Using Deflection Measurement

Evaluation of Strain Field Around Impacted Particles by Applying Electron Moiré Method

M. Watanabe; S. Kishimoto; K. Shinoda; S. Kuroda

ITSC 2007; 901-906https://doi.org/10.31399/asm.cp.itsc2007p0901

View Articletitled, Evaluation of Strain Field Around Impacted Particles by Applying Electron Moiré Method

Study of Thick Tungsten Coatings Deposited on Various Molybdenum and Copper Substrates

Z.Q. Kuang; M. Liu; C.G. Deng; K.S. Zhou; G.N. Luo

ITSC 2007; 907-910https://doi.org/10.31399/asm.cp.itsc2007p0907

View Articletitled, Study of Thick Tungsten Coatings Deposited on Various Molybdenum and Copper Substrates

Impingement Resistance of HVAF WC-based Coatings

C. Deng; K. Zhou; M. Liu; J. Song; C. Wu

ITSC 2007; 911-915https://doi.org/10.31399/asm.cp.itsc2007p0911

View Articletitled, Impingement Resistance of HVAF WC-based Coatings

Non-Destructive Testing of Coatings by Surface Acoustic Waves

L.-M. Berger; D. Schneider; T. Großer

ITSC 2007; 916-921https://doi.org/10.31399/asm.cp.itsc2007p0916

View Articletitled, Non-Destructive Testing of Coatings by Surface Acoustic Waves

Influence of Oxidation Phenomenon on Tribological Behaviour of Plasma Spray Coating

A. Stihle; H. Liao; M.P. Planche; C. Coddet; S. Kenzari

ITSC 2007; 922-926https://doi.org/10.31399/asm.cp.itsc2007p0922

View Articletitled, Influence of Oxidation Phenomenon on Tribological Behaviour of Plasma Spray Coating

Effect of Aluminum Additive on Friction and Wear Behaviour of Plasma Sprayed Ceramic Coatings

S.Y. Tao; Z.J. Yin; X.M. Zhou; C.X. Ding

ITSC 2007; 927-930https://doi.org/10.31399/asm.cp.itsc2007p0927

View Articletitled, Effect of Aluminum Additive on Friction and Wear Behaviour of Plasma Sprayed Ceramic Coatings

Tribological and Corrosion Behavior of Vacuum Plasma Sprayed Ti-Zr-Ni Quasicrystalline Coatings

S. Siegmann; P. Kern; L. Rohr; P.P. Bandyopadhyay

ITSC 2007; 931-936https://doi.org/10.31399/asm.cp.itsc2007p0931

View Articletitled, Tribological and Corrosion Behavior of Vacuum Plasma Sprayed Ti-Zr-Ni Quasicrystalline Coatings

Investigation of the Corrosion Behavior of HVOF-Sprayed Carbide Cermet Coatings in Molten Al-Zn-Si Alloy Bath

X.H. Tan; Z.H. Jiang; Y.G. Zhang; J.S. Sun

ITSC 2007; 937-942https://doi.org/10.31399/asm.cp.itsc2007p0937

View Articletitled, Investigation of the Corrosion Behavior of HVOF-Sprayed Carbide Cermet Coatings in Molten Al-Zn-Si Alloy Bath

Erosion Properties of Plasma Sprayed Ceramic Coatings Against Process Plasma in Semiconductor Production Equipment

J. Kitamura; H. Ibe; H. Mizuno; I. Aoki

ITSC 2007; 943-947https://doi.org/10.31399/asm.cp.itsc2007p0943

View Articletitled, Erosion Properties of Plasma Sprayed Ceramic Coatings Against Process Plasma in Semiconductor Production Equipment

Effect of Particle Size Range on Thermally Grown Oxide Scale Formation on Vacuum Plasma Sprayed CoNi- and CoCrAIY Coatings

D. Seo; K. Ogawa; T. Shoji; S. Murata

ITSC 2007; 948-953https://doi.org/10.31399/asm.cp.itsc2007p0948

View Articletitled, Effect of Particle Size Range on Thermally Grown Oxide Scale Formation on Vacuum Plasma Sprayed CoNi- and CoCrAIY Coatings

Process Maps of Ni-Cr Coatings by HVOF Spraying

A. Valarezo; W.B. Choi; W. Chi; A. Gouldstone; S. Sampath

ITSC 2007; 954-959https://doi.org/10.31399/asm.cp.itsc2007p0954

View Articletitled, Process Maps of Ni-Cr Coatings by HVOF Spraying

Effect of Powder Injection Location on Ceramic Coatings Properties When Using Plasma Spray

L.T. An; Y. Gao

ITSC 2007; 960-964https://doi.org/10.31399/asm.cp.itsc2007p0960

View Articletitled, Effect of Powder Injection Location on Ceramic Coatings Properties When Using Plasma Spray

Characterization of Coatings Sprayed with AMT200 HVOF System

G. Zhang; H. Liao; C. Coddet; C. Malavolta; B. Hansz; S. Keller

ITSC 2007; 965-970https://doi.org/10.31399/asm.cp.itsc2007p0965

View Articletitled, Characterization of Coatings Sprayed with AMT200 HVOF System

High Temperature Mechanical Properties of Plasma Sprayed Thin YSZ Deposits

A.A. Syed; G. Antou; A. Denoirjean

ITSC 2007; 971-976https://doi.org/10.31399/asm.cp.itsc2007p0971

View Articletitled, High Temperature Mechanical Properties of Plasma Sprayed Thin YSZ Deposits

Effects of Substrate Temperature During Thermal Spray Deposition on Mechanical Properties of Ceramic Coating

H. Yamano; T. Takabatake; K. Tani

ITSC 2007; 977-982https://doi.org/10.31399/asm.cp.itsc2007p0977

View Articletitled, Effects of Substrate Temperature During Thermal Spray Deposition on Mechanical Properties of Ceramic Coating

Effect of Plasma Spraying Process on Microstructure and Microhardness of Titanium Alloy Substrate

H. Zhou; F. Li; B. He; J. Wang; B. Sun

ITSC 2007; 983-987https://doi.org/10.31399/asm.cp.itsc2007p0983

View Articletitled, Effect of Plasma Spraying Process on Microstructure and Microhardness of Titanium Alloy Substrate

Testing Method for Heat Resistance Under Temperature Gradient

K. Takagi; A. Kawasaki; Y. Itoh; Y. Harada; F. Ono

ITSC 2007; 988-991https://doi.org/10.31399/asm.cp.itsc2007p0988

View Articletitled, Testing Method for Heat Resistance Under Temperature Gradient

Microstructure and Properties of Silicon Coating Prepared by Air Plasma Spraying

Y.R. Niu; X.Y. Liu; X.M. Zhou; C.X. Ding

ITSC 2007; 992-995https://doi.org/10.31399/asm.cp.itsc2007p0992

View Articletitled, Microstructure and Properties of Silicon Coating Prepared by Air Plasma Spraying

Influence of Particle Size on Microstructure and Properties of Al₂O₃ Coatings Deposited by Plasma Spraying

Z.J. Yin; S.Y. Tao; X.M. Zhou; C.X. Ding

ITSC 2007; 996-1000https://doi.org/10.31399/asm.cp.itsc2007p0996

View Articletitled, Influence of Particle Size on Microstructure and Properties of Al<sub>2</sub>O<sub>3</sub> Coatings Deposited by Plasma Spraying

Research Progress and Prospects of Thermally Sprayed Functionally Gradient Materials

P.J. Hou; H.G. Wang; B.L. Zha; X.J. Yuan; L. Jiang

ITSC 2007; 1001-1006https://doi.org/10.31399/asm.cp.itsc2007p1001

View Articletitled, Research Progress and Prospects of Thermally Sprayed Functionally Gradient Materials

Properties of Copper Coatings Deposited by Multi-function Micro-plasma Spraying

G. Liu; L.Y. Wang; H.G. Wang; S.C. Hua

ITSC 2007; 1007-1010https://doi.org/10.31399/asm.cp.itsc2007p1007

View Articletitled, Properties of Copper Coatings Deposited by Multi-function Micro-plasma Spraying

Behavior of Thermally Sprayed Wear Protective Coatings Exposed to Different Abrasive Wear Conditions in Comparison to Hard Chromium Platings

A. Wank; A. Schwenk; B. Wielage; T. Grund; E. Friesen; H. Pokhmurska

ITSC 2007; 1011-1016https://doi.org/10.31399/asm.cp.itsc2007p1011

View Articletitled, Behavior of Thermally Sprayed Wear Protective Coatings Exposed to Different Abrasive Wear Conditions in Comparison to Hard Chromium Platings

Flame-Sprayed Glaze Coatings: Structure and Some Properties

A. Arcondéguy; B. Pateyron; A. Grimaud; G. Montavon; A. Denoirjean; G. Gasgnier; C. Huguet

ITSC 2007; 1017-1022https://doi.org/10.31399/asm.cp.itsc2007p1017

View Articletitled, Flame-Sprayed Glaze Coatings: Structure and Some Properties

Surface and Coating Treatments

Microstructure Control of Thermally Sprayed Co-based Self-fluxing Alloy Coatings by Diffusion Treatment

K. Sakata; K. Nakano; H. Miyahara; Y. Matsubara; K. Ogi

ITSC 2007; 1023-1028https://doi.org/10.31399/asm.cp.itsc2007p1023

View Articletitled, Microstructure Control of Thermally Sprayed Co-based Self-fluxing Alloy Coatings by Diffusion Treatment

Plasma Electrolytic Oxidation of Arc Sprayed Aluminium Coatings

V. Pokhmurskii; G. Nykyforchyn; M. Student; M. Klapkiv; G.V. Karpenko; H. Pokhmurska; B. Wielage; T. Grund; A. Wank

ITSC 2007; 1029-1034https://doi.org/10.31399/asm.cp.itsc2007p1029

View Articletitled, Plasma Electrolytic Oxidation of Arc Sprayed Aluminium Coatings

Effects of Laser Irradiation on Plasma Sprayed AI₂O₃ Coatings

Y. Kobayashi; E. Ohmura; S. Ueki

ITSC 2007; 1035-1040https://doi.org/10.31399/asm.cp.itsc2007p1035

View Articletitled, Effects of Laser Irradiation on Plasma Sprayed AI<sub>2</sub>O<sub>3</sub> Coatings

Modeling and Experimental Study of the High Pressure Gas Atomization of Liquid Metals

A. Allimant; M.-P. Planche; L. Dembinski; C. Coddet

ITSC 2007; 1041-1046https://doi.org/10.31399/asm.cp.itsc2007p1041

View Articletitled, Modeling and Experimental Study of the High Pressure Gas Atomization of Liquid Metals

Effect of Laser Irradiation on Micro Structure of Carbide Coatings

T. Kuwashima; T. Saitoh; T. Sonoda; K. Suzuki; M. Fujiwara

ITSC 2007; 1047-1052https://doi.org/10.31399/asm.cp.itsc2007p1047

View Articletitled, Effect of Laser Irradiation on Micro Structure of Carbide Coatings

Investigation on HVOF-Technique for Fabrication of SOFCs (Solid Oxide Fuel Cells) Electrolyte Layers

R. Gadow; A. Killinger; A. Candel Ruiz; H. Weckmann; A. Öllinger; O. Patz

ITSC 2007; 1053-1058https://doi.org/10.31399/asm.cp.itsc2007p1053

View Articletitled, Investigation on HVOF-Technique for Fabrication of SOFCs (Solid Oxide Fuel Cells) Electrolyte Layers

Effect of the Blasting Angle on the Amount of the Residual Grit on Blasted Substrates

T. Maruyama; K. Akagi; T. Kobayashi

ITSC 2007; 1059-1063https://doi.org/10.31399/asm.cp.itsc2007p1059

View Articletitled, Effect of the Blasting Angle on the Amount of the Residual Grit on Blasted Substrates

Microstructure and Electrical Conductivity of Atmospheric Plasma Sprayed LSM-YSZ Composite Cathode Coating

C. Zhang; W.-Y. Li; H. Liao; C. Coddet; C.-J. Li; C.-X. Li

ITSC 2007; 1064-1069https://doi.org/10.31399/asm.cp.itsc2007p1064

View Articletitled, Microstructure and Electrical Conductivity of Atmospheric Plasma Sprayed LSM-YSZ Composite Cathode Coating

Influence of Laser Induced Surface Topography on the Surface Static Wettability in PROTAL

H. Li; Y. Danlos; S. Costil; C. Coddet

ITSC 2007; 1070-1074https://doi.org/10.31399/asm.cp.itsc2007p1070

View Articletitled, Influence of Laser Induced Surface Topography on the Surface Static Wettability in PROTAL

Thermal Spray and Other Surface Engineering Technologies

Cladding of Aluminum Substrates with Nano Crystalline Solidifying Wear Resistant Iron-Based Materials

J. Wilden; J.P. Bergmann; S. Reich; S. Schlichting; Th. Schnick

ITSC 2007; 1075-1079https://doi.org/10.31399/asm.cp.itsc2007p1075

View Articletitled, Cladding of Aluminum Substrates with Nano Crystalline Solidifying Wear Resistant Iron-Based Materials

Novel Hybrid Coatings

R. Bamola; L. Gilpin; A. Sickinger; K. Cano

ITSC 2007; 1080-1083https://doi.org/10.31399/asm.cp.itsc2007p1080

View Articletitled, Novel Hybrid Coatings

Powder Production Technology for Thermal Spraying

N. Toplan; Y. Karakaş; F. Yilmaz

ITSC 2007; 1084-1088https://doi.org/10.31399/asm.cp.itsc2007p1084

View Articletitled, Powder Production Technology for Thermal Spraying

Phase Assemblage of Al-Cu-Cr Quasicrystalline Coatings Sprayed by Low Power Plasma

Y.Q. Fu; F. Zhou; Y. Gao

ITSC 2007; 1089-1092https://doi.org/10.31399/asm.cp.itsc2007p1089

View Articletitled, Phase Assemblage of Al-Cu-Cr Quasicrystalline Coatings Sprayed by Low Power Plasma

Dye Sensitized Solar Cells Using Titanium Oxide Photo Voltaic Devices Fabricated by Different Thermal Plasma Processes

Y. Ando; S. Tobe; H. Tahara

ITSC 2007; 1093-1098https://doi.org/10.31399/asm.cp.itsc2007p1093

View Articletitled, Dye Sensitized Solar Cells Using Titanium Oxide Photo Voltaic Devices Fabricated by Different Thermal Plasma Processes

Hot Corrosion Resistant Laser Coatings in Diesel Engine

J. Touminen; M. Honkanen; M. Uusitalo; S. Ahmaniemi; P. Vuoristo; T. Mäntylä

ITSC 2007; 1099-1104https://doi.org/10.31399/asm.cp.itsc2007p1099

View Articletitled, Hot Corrosion Resistant Laser Coatings in Diesel Engine

Production and Characterization of Metastable ZrO₂-Al₂O₃ Coatings Obtained by APS + Quench

S. Dosta; I.G. Cano; J.R. Miguel; J.M. Guilemany

ITSC 2007; 1105-1108https://doi.org/10.31399/asm.cp.itsc2007p1105

View Articletitled, Production and Characterization of Metastable ZrO<sub>2</sub>-Al<sub>2</sub>O<sub>3</sub> Coatings Obtained by APS + Quench

Oxidation Behavior of HVOF-sprayed ODS-Fe40Al Coatings at 900°C

J.M. Guilemany; N. Cinca; S. Dosta; C.R.C. Lima

ITSC 2007; 1109-1114https://doi.org/10.31399/asm.cp.itsc2007p1109

View Articletitled, Oxidation Behavior of HVOF-sprayed ODS-Fe40Al Coatings at 900°C

Properties of HVOF Coating of Ni Based Alloy for MSWI Boiler Protection

J.M. Guilemany; M. Torrell; J.R. Miguel

ITSC 2007; 1115-1119https://doi.org/10.31399/asm.cp.itsc2007p1115

View Articletitled, Properties of HVOF Coating of Ni Based Alloy for MSWI Boiler Protection

Wear Protection

Laser Cladding: A New Technology for Corrosion and Erosion Protection of Boiler Tubes

V. Fantini

ITSC 2007; 1120-1124https://doi.org/10.31399/asm.cp.itsc2007p1120

View Articletitled, Laser Cladding: A New Technology for Corrosion and Erosion Protection of Boiler Tubes

Formation of WC/12%Co Coatings by High Velocity Oxygen-Fuel Spraying with High Wear Resistance and Lower Surface Roughness

K. Sato; H. Ibe; H. Mizuno; J. Kitamura

ITSC 2007; 1125-1128https://doi.org/10.31399/asm.cp.itsc2007p1125

View Articletitled, Formation of WC/12%Co Coatings by High Velocity Oxygen-Fuel Spraying with High Wear Resistance and Lower Surface Roughness

Characterization of Nano-Structured WC-Co Deposited by Cold Spraying

C.-J. Li; G.-J. Yang; C.-X. Li; Y.-Y. Wang; J. Ma; P.-H. Gao

ITSC 2007; 1129-1134https://doi.org/10.31399/asm.cp.itsc2007p1129

View Articletitled, Characterization of Nano-Structured WC-Co Deposited by Cold Spraying

Study on Abrasive Resistance of Arc Spraying Fe-Based Coatings Containing Cr₃C₂ Hard Phase

D.-Y. He; B.-Y. Fu; J.-M. Jiang; X.-Y. Li

ITSC 2007; 1135-1139https://doi.org/10.31399/asm.cp.itsc2007p1135

View Articletitled, Study on Abrasive Resistance of Arc Spraying Fe-Based Coatings Containing Cr<sub>3</sub>C<sub>2</sub> Hard Phase

Development and Investigation of SiC-based Thermal Spray Powders with Alumina-Yttria Binder Matrix

B. Wielage; T. Grund; M. Nebelung; S. Thiele; A. Wank; A. Schwenk

ITSC 2007; 1140-1144https://doi.org/10.31399/asm.cp.itsc2007p1140

View Articletitled, Development and Investigation of SiC-based Thermal Spray Powders with Alumina-Yttria Binder Matrix

Study on Iron Based Arc Spraying Cored Wire with TiC Ceramic Powders

D.-Y. He; F.-Y. Zhang; J.-M. Jiang; B.-Y. Fu; X.-Y. Li

ITSC 2007; 1145-1148https://doi.org/10.31399/asm.cp.itsc2007p1145

View Articletitled, Study on Iron Based Arc Spraying Cored Wire with TiC Ceramic Powders

Thermal Spraying of FeB Coatings Containing h-BN Solid Lubricant

I. Ozdemir; T. Grund; B. Wielage; Y. Tsunekawa

ITSC 2007; 1149-1154https://doi.org/10.31399/asm.cp.itsc2007p1149

View Articletitled, Thermal Spraying of FeB Coatings Containing h-BN Solid Lubricant

Characterization of ZrO₂-based Coatings by Low Pressure Plasma Spraying Under Different Pressures

Y. Ye; M. Liu; K.-S. Zhou; D.-Q. Yi; Z.-Q. Kuang; C.-G. Deng

ITSC 2007; 1155-1159https://doi.org/10.31399/asm.cp.itsc2007p1155

View Articletitled, Characterization of ZrO<sub>2</sub>-based Coatings by Low Pressure Plasma Spraying Under Different Pressures

Training, Quality, and Safety

Possibilities for Qualification and Certification of Personnel, Companies and QM-Systems in the Field of Thermal Spraying

D. Böhme; R. Huber

ITSC 2007; 1160-1164https://doi.org/10.31399/asm.cp.itsc2007p1160

View Articletitled, Possibilities for Qualification and Certification of Personnel, Companies and QM-Systems in the Field of Thermal Spraying

Workpiece Related Quality Management on High-End Thermal Spray Systems

A. Kilchenmann; M. Haas

ITSC 2007; 1165-1168https://doi.org/10.31399/asm.cp.itsc2007p1165

View Articletitled, Workpiece Related Quality Management on High-End Thermal Spray Systems

A Method of Evaluating Thermal Spray Process Performance

R. Molz; D. Hawley

ITSC 2007; 1169-1174https://doi.org/10.31399/asm.cp.itsc2007p1169

View Articletitled, A Method of Evaluating Thermal Spray Process Performance

Responsibility for Occupational Safety

F. Kammermann; H. Wernli; W. Windler; R. Moll

ITSC 2007; 1175-1177https://doi.org/10.31399/asm.cp.itsc2007p1175

View Articletitled, Responsibility for Occupational Safety

Semantic Technology as a Core Business Activity for Thermal Sprayers

P. Chandler

ITSC 2007; 1178-1180https://doi.org/10.31399/asm.cp.itsc2007p1178

View Articletitled, Semantic Technology as a Core Business Activity for Thermal Sprayers

Volume Information

Preface

ITSC 2007; iii-vhttps://doi.org/10.31399/asm.cp.itsc2007fm01

View Articletitled, Preface

Organizing Committees

ITSC 2007; vihttps://doi.org/10.31399/asm.cp.itsc2007fm02

View Articletitled, Organizing Committees

Thermal Spray Hall of Fame

ITSC 2007; viihttps://doi.org/10.31399/asm.cp.itsc2007fm03

View Articletitled, Thermal Spray Hall of Fame