Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2006: Proceedings from the International Thermal Spray Conference

Biomedical Coatings

Advanced Statistical Optimization of Parameters at Plasma Spraying of Hydroxyapatite Coatings

S. Dyshlovenko; C. Pierlot; R. Tomaszek; L. Pawlowski; P. Roussel

ITSC 2006; 1-4https://doi.org/10.31399/asm.cp.itsc2006p0001

View Articletitled, Advanced Statistical Optimization of Parameters at Plasma Spraying of Hydroxyapatite Coatings

Effect of Steam Treatment during Plasma Spraying on the Microstructure of Hydroxyapatite (HA) Splats and Coatings

H. Li; K.A. Khor; P. Cheang

ITSC 2006; 5-10https://doi.org/10.31399/asm.cp.itsc2006p0005

View Articletitled, Effect of Steam Treatment during Plasma Spraying on the Microstructure of Hydroxyapatite (HA) Splats and Coatings

The Influence of Thermal Treatment on Hydroxyapatite Coatings Obtained by HVOF

J. Fernández; M. Gaona; J.M. Guilemany

ITSC 2006; 11-16https://doi.org/10.31399/asm.cp.itsc2006p0011

View Articletitled, The Influence of Thermal Treatment on Hydroxyapatite Coatings Obtained by HVOF

Plasma Spraying of Hydroxyapatite Coatings Obtained from Two different Precursors

E. Garcia; Z.B. Zhang; T.W. Coyle; L. Gan; R. Pilliar

ITSC 2006; 17-22https://doi.org/10.31399/asm.cp.itsc2006p0017

View Articletitled, Plasma Spraying of Hydroxyapatite Coatings Obtained from Two different Precursors

Gas Tunnel Type Plasma Spraying of Hydroxyapatite Coatings

M.F. Marks; A. Kobayashi

ITSC 2006; 23-28https://doi.org/10.31399/asm.cp.itsc2006p0023

View Articletitled, Gas Tunnel Type Plasma Spraying of Hydroxyapatite Coatings

Effect of Microplasma Spray Conditions on Structure, Phase Composition and Texture of Hydroxyapatite Coatings

Y. Borisov; S. Voynarovych; A. Kislitsa; A. Borisova; M. Karpetz; A. Tunik

ITSC 2006; 29-34https://doi.org/10.31399/asm.cp.itsc2006p0029

View Articletitled, Effect of Microplasma Spray Conditions on Structure, Phase Composition and Texture of Hydroxyapatite Coatings

The Role of Hydroxylapatite Coating Characteristics in Bone Integration after Two Decades of Follow-up in Human Beings

Patrick Frayssinet; Dominique Hardy; Nicole Rouquet

ITSC 2006; 35-40https://doi.org/10.31399/asm.cp.itsc2006p0035

View Articletitled, The Role of Hydroxylapatite Coating Characteristics in Bone Integration after Two Decades of Follow-up in Human Beings

Biocompatible Nanostructured High Velocity Oxy-Fuel (HVOF) Sprayed Titania Coating

R.S. Lima; B.R. Marple; H. Li; K.A. Khor

ITSC 2006; 41-46https://doi.org/10.31399/asm.cp.itsc2006p0041

View Articletitled, Biocompatible Nanostructured High Velocity Oxy-Fuel (HVOF) Sprayed Titania Coating

Proliferation of the Osteoblast Cells on Nanostructured Hydroxyapatite Coatings: a Study through 2-D Electrophoresis Assay

H. Li; K.A. Khor; W.N. Chen; T.L. Tan; H. Pan; P. Cheang

ITSC 2006; 47-52https://doi.org/10.31399/asm.cp.itsc2006p0047

View Articletitled, Proliferation of the Osteoblast Cells on Nanostructured Hydroxyapatite Coatings: a Study through 2-D Electrophoresis Assay

Introduction of Bioactivity to Plasma Sprayed TiO₂ Coating with Nanostructured Surface by Post-Treatment

X.Y. Liu; X.B. Zhao; C.X. Ding

ITSC 2006; 53-58https://doi.org/10.31399/asm.cp.itsc2006p0053

View Articletitled, Introduction of Bioactivity to Plasma Sprayed TiO<sub>2</sub> Coating with Nanostructured Surface by Post-Treatment

Development of Osteoblast Colonies on New Bioactive Coatings

J.-G. Legoux; F. Chellat; R.S. Lima; B.R. Marple; M.N. Bureau; H. Shen; G.A. Candeliere

ITSC 2006; 59-64https://doi.org/10.31399/asm.cp.itsc2006p0059

View Articletitled, Development of Osteoblast Colonies on New Bioactive Coatings

Investigation of the Interface Strength of Hydroxyapatite Coating by the LASAT (Laser Shock Adhesion Test) Method

S. Bansard; K.A. Khor; F. Borit; V. Guipont; M. Jeandin; M. Nivard; L. Berthe

ITSC 2006; 65-70https://doi.org/10.31399/asm.cp.itsc2006p0065

View Articletitled, Investigation of the Interface Strength of Hydroxyapatite Coating by the LASAT (Laser Shock Adhesion Test) Method

Bonding Strength Investigation of Plasma-sprayed HA Coatings on Alumina Substrate with Porcelain Intermediate Layer

Y.C. Yang; C.S. Choun; E. Chang

ITSC 2006; 71-76https://doi.org/10.31399/asm.cp.itsc2006p0071

View Articletitled, Bonding Strength Investigation of Plasma-sprayed HA Coatings on Alumina Substrate with Porcelain Intermediate Layer

Investigation of Plasma Sprayed Hydroxyapatite Coatings

T.J. Levingstone; J. Stokes; L. Looney

ITSC 2006; 77-82https://doi.org/10.31399/asm.cp.itsc2006p0077

View Articletitled, Investigation of Plasma Sprayed Hydroxyapatite Coatings

Cold Spray

The Cold Spray Process and Its Optimization

H. Kreye; T. Schmidt; F. Gärtner; T. Stoltenhoff

ITSC 2006; 83-88https://doi.org/10.31399/asm.cp.itsc2006p0083

View Articletitled, The Cold Spray Process and Its Optimization

New Developments in Cold Spray Based on Higher Gas- and Particle Temperatures

T. Schmidt; F. Gaertner; H. Kreye

ITSC 2006; 89-96https://doi.org/10.31399/asm.cp.itsc2006p0089

View Articletitled, New Developments in Cold Spray Based on Higher Gas- and Particle Temperatures

The Influence of Particle Morphology on In-flight Particle Velocity in Cold Spray

H. Fukanuma; N. Ohno; B. Sun; R. Huang

ITSC 2006; 97-102https://doi.org/10.31399/asm.cp.itsc2006p0097

View Articletitled, The Influence of Particle Morphology on In-flight Particle Velocity in Cold Spray

Optimal Particle Size for the Cold Spray Process

D. Helfritch; V. Champagne

ITSC 2006; 103-108https://doi.org/10.31399/asm.cp.itsc2006p0103

View Articletitled, Optimal Particle Size for the Cold Spray Process

Cold Gas Dynamic Spraying of Fe-based Amorphous Alloy

L. Ajdelsztajn; E.J. Lavernia; B. Jodoin; P. Richer; E. Sansoucy

ITSC 2006; 109-114https://doi.org/10.31399/asm.cp.itsc2006p0109

View Articletitled, Cold Gas Dynamic Spraying of Fe-based Amorphous Alloy

Cold Sprayed Discontinuously Reinforced Aluminum (DRA)

J. Haynes; A. Pandey; J. Karthikeyan; A. Kay

ITSC 2006; 115-120https://doi.org/10.31399/asm.cp.itsc2006p0115

View Articletitled, Cold Sprayed Discontinuously Reinforced Aluminum (DRA)

Structure Formation of Ni-based Composite Coatings during Low Pressure Gas Dynamic Spraying

R.Gr. Maev; V. Leshchynsky; A. Papyrin

ITSC 2006; 121-126https://doi.org/10.31399/asm.cp.itsc2006p0121

View Articletitled, Structure Formation of Ni-based Composite Coatings during Low Pressure Gas Dynamic Spraying

Gas Dynamic Spray Composite Coatings for Iron and Steel Castings

M. Beneteau; W. Birtch; J. Villafuerte; J. Paille; M. Petrocik; R.Gr. Maev; E. Strumban; V. Leshchynsky

ITSC 2006; 127-132https://doi.org/10.31399/asm.cp.itsc2006p0127

View Articletitled, Gas Dynamic Spray Composite Coatings for Iron and Steel Castings

Low Pressure Gas Dynamic Spray Forming Near-net Shape Parts

H. Weinert; E. Maeva; V. Leshchynsky

ITSC 2006; 133-138https://doi.org/10.31399/asm.cp.itsc2006p0133

View Articletitled, Low Pressure Gas Dynamic Spray Forming Near-net Shape Parts

Kinetic Sprayed Rare Earth Iron Alloy Composite Coatings

T. Van Steenkiste

ITSC 2006; 139-144https://doi.org/10.31399/asm.cp.itsc2006p0139

View Articletitled, Kinetic Sprayed Rare Earth Iron Alloy Composite Coatings

Effect of Spraying Parameters on the Microstructure and Bond Strength of Cold Spray Aluminum Alloy Coatings

E. Sansoucy; B. Jodoin; P. Richer; L. Ajdelsztajn

ITSC 2006; 145-150https://doi.org/10.31399/asm.cp.itsc2006p0145

View Articletitled, Effect of Spraying Parameters on the Microstructure and Bond Strength of Cold Spray Aluminum Alloy Coatings

The Effect of Cold Spray Deposition of a Titanium Coating on the Fatigue Behaviour of a Titanium Alloy

T.S. Price; P.H. Shipway; D.G. McCartney

ITSC 2006; 151-156https://doi.org/10.31399/asm.cp.itsc2006p0151

View Articletitled, The Effect of Cold Spray Deposition of a Titanium Coating on the Fatigue Behaviour of a Titanium Alloy

Formation of Fe-Al Intermetallic Compound Coating Through Cold Spraying

H.-T. Wang; C.-J. Li; G.-J. Yang; C.-X. Li

ITSC 2006; 157-162https://doi.org/10.31399/asm.cp.itsc2006p0157

View Articletitled, Formation of Fe-Al Intermetallic Compound Coating Through Cold Spraying

Mechanical Properties and Corrosion Resistance of Cold Sprayed Coatings

H. Mäkinen; J. Lagerbom; P. Vuoristo

ITSC 2006; 163-168https://doi.org/10.31399/asm.cp.itsc2006p0163

View Articletitled, Mechanical Properties and Corrosion Resistance of Cold Sprayed Coatings

Comparison Between Coatings from two Different Copper Powders: Mechanical Properties, Hardness and Bond Strength

T. Kairet; G. Di Stefano; M. Degrez; F. Campana; J-P Janssen

ITSC 2006; 169-174https://doi.org/10.31399/asm.cp.itsc2006p0169

View Articletitled, Comparison Between Coatings from two Different Copper Powders: Mechanical Properties, Hardness and Bond Strength

Cold Spraying – Potential and New Application Ideas

W. Kroemmer; P. Heinrich

ITSC 2006; 175-178https://doi.org/10.31399/asm.cp.itsc2006p0175

View Articletitled, Cold Spraying – Potential and New Application Ideas

Depositing Titanium Alloy Additive Features to Forgings and Extrusions Using the Cold Spray Process

R.E. Blose; B.H. Walker; R.M. Walker; S.H. Froes

ITSC 2006; 179-184https://doi.org/10.31399/asm.cp.itsc2006p0179

View Articletitled, Depositing Titanium Alloy Additive Features to Forgings and Extrusions Using the Cold Spray Process

SIMAT Application for Aerospace Corrosion Protection and Structural Repair

B. Boro Djordjevic; R. Gr. Maev

ITSC 2006; 185-190https://doi.org/10.31399/asm.cp.itsc2006p0185

View Articletitled, SIMAT Application for Aerospace Corrosion Protection and Structural Repair

Numerical Simulation of the Cold Gas Dynamic Spray Process

M. Karimi; A. Fartaj; G.W. Rankin; D. Vanderzwet; J. Villafuerte; W. Birtch

ITSC 2006; 191-196https://doi.org/10.31399/asm.cp.itsc2006p0191

View Articletitled, Numerical Simulation of the Cold Gas Dynamic Spray Process

Assessment of Metal/Diamond Composite Coatings by Cold Spray Deposition

H.J. Kim; D.H. Jung; J.H. Jang; C.H. Lee

ITSC 2006; 197-202https://doi.org/10.31399/asm.cp.itsc2006p0197

View Articletitled, Assessment of Metal/Diamond Composite Coatings by Cold Spray Deposition

Effect of the Coating Erosion on the Cold Spray Process

A.N. Papyrin; V.F. Kosarev; S.V. Klinkov

ITSC 2006; 203-208https://doi.org/10.31399/asm.cp.itsc2006p0203

View Articletitled, Effect of the Coating Erosion on the Cold Spray Process

Effect of Spraying Parameters on Stainless Steel Particle Velocity and Deposition Efficiency in Cold Spraying

B. Sun; R.-Z. Huang; N. Ohno; H. Fukanuma

ITSC 2006; 209-214https://doi.org/10.31399/asm.cp.itsc2006p0209

View Articletitled, Effect of Spraying Parameters on Stainless Steel Particle Velocity and Deposition Efficiency in Cold Spraying

Influence of Powder Type and Properties on Ceramic Layer Deposition by Cold Spraying

S. Veräjänkorva; J. Lagerbom; P. Vuoristo

ITSC 2006; 215-220https://doi.org/10.31399/asm.cp.itsc2006p0215

View Articletitled, Influence of Powder Type and Properties on Ceramic Layer Deposition by Cold Spraying

Low Pressure Gas Dynamic Spray: Shear Localization during Particle Shock Consolidation

R. Gr. Maev; Ev. Leshchinsky

ITSC 2006; 221-226https://doi.org/10.31399/asm.cp.itsc2006p0221

View Articletitled, Low Pressure Gas Dynamic Spray: Shear Localization during Particle Shock Consolidation

Properties of Cold Spray Nickel Based Coatings

P. Richer; B. Jodoin; E. Sansoucy; L. Ajdelsztajn; G.E. Kim

ITSC 2006; 227-232https://doi.org/10.31399/asm.cp.itsc2006p0227

View Articletitled, Properties of Cold Spray Nickel Based Coatings

Effect of Particle Temperature on the Critical Velocity for Particle Deposition by Kinetic Spraying

J.H. Lee; J.S. Kim; S.M. Shin; C.H. Lee; H.J. Kim

ITSC 2006; 233-238https://doi.org/10.31399/asm.cp.itsc2006p0233

View Articletitled, Effect of Particle Temperature on the Critical Velocity for Particle Deposition by Kinetic Spraying

Critical and Maximum Velocities in Kinetic Spraying

J.W. Wu; H.Y. Fang; C.H. Lee; S.H. Yoon; H.J. Kim

ITSC 2006; 239-246https://doi.org/10.31399/asm.cp.itsc2006p0239

View Articletitled, Critical and Maximum Velocities in Kinetic Spraying

Characterization of Microstructure of TiO₂ Coating Deposited by Vacuum Cold Spraying

S.-Q. Fan; G.-J. Yang; G.-J. Liu; C.-X. Li; C.-J. Li; L.-Z. Zhang

ITSC 2006; 247-252https://doi.org/10.31399/asm.cp.itsc2006p0247

View Articletitled, Characterization of Microstructure of TiO<sub>2</sub> Coating Deposited by Vacuum Cold Spraying

Measurement and Numerical Simulation of Particle Velocity in Cold Spraying

W.-Y. Li; C.-J. Li; H.-T. Wang; C.-X. Li

ITSC 2006; 253-258https://doi.org/10.31399/asm.cp.itsc2006p0253

View Articletitled, Measurement and Numerical Simulation of Particle Velocity in Cold Spraying

Optimal Design of a Convergent-Barrel Cold Spray Nozzle by Numerical Method

W.-Y. Li; H.L. Liao; G. Zhang; C. Coddet; H.-T. Wang; C.-J. Li

ITSC 2006; 259-264https://doi.org/10.31399/asm.cp.itsc2006p0259

View Articletitled, Optimal Design of a Convergent-Barrel Cold Spray Nozzle by Numerical Method

Comparison of the Microstructure of Cold Sprayed and Thermally Sprayed IN718 Coatings

T. Marrocco; D.G. McCartney; P.H. Shipway; A.J. Sturgeon

ITSC 2006; 265-270https://doi.org/10.31399/asm.cp.itsc2006p0265

View Articletitled, Comparison of the Microstructure of Cold Sprayed and Thermally Sprayed IN718 Coatings

Cold Spray Deposition of Metastable Alloys

B. Jodoin; L. Ajdelsztajn; G. Berube; J. Villafuerte

ITSC 2006; 271-276https://doi.org/10.31399/asm.cp.itsc2006p0271

View Articletitled, Cold Spray Deposition of Metastable Alloys

Mechanisms Resulting in Improved Ductility of Cold Spray Coatings after Annealing

A.C. Hall; R.L. Williamson; D.A. Hirschfeld; T.J. Roemer

ITSC 2006; 277-282https://doi.org/10.31399/asm.cp.itsc2006p0277

View Articletitled, Mechanisms Resulting in Improved Ductility of Cold Spray Coatings after Annealing

Process Modeling and Simulation

Computational Modeling of Cold Spray Process: Effect of Substrate and Particle Size on Gas-particle Flow

Q. Zhu; A. Dolatabadi

ITSC 2006; 283-288https://doi.org/10.31399/asm.cp.itsc2006p0283

View Articletitled, Computational Modeling of Cold Spray Process: Effect of Substrate and Particle Size on Gas-particle Flow

Simulation of Particle-Shock Interaction in a HVOF Process

V.R. Srivatsan; A. Dolatabadi

ITSC 2006; 289-294https://doi.org/10.31399/asm.cp.itsc2006p0289

View Articletitled, Simulation of Particle-Shock Interaction in a HVOF Process

Physical Bonding of Spray Particles to the Substrate for High Impact Velocity Droplet

H. Yang

ITSC 2006; 295-300https://doi.org/10.31399/asm.cp.itsc2006p0295

View Articletitled, Physical Bonding of Spray Particles to the Substrate for High Impact Velocity Droplet

Modelling a Plasma Torch for Atmospheric Plasma Spraying (APS): Optimization of Particle Injection Near the Torch Outlet According to the Gas Flow within the Torch

J.-L. Marqués; K. Ramachandran; R. Vaßen; D. Stöver

ITSC 2006; 301-308https://doi.org/10.31399/asm.cp.itsc2006p0301

View Articletitled, Modelling a Plasma Torch for Atmospheric Plasma Spraying (APS): Optimization of Particle Injection Near the Torch Outlet According to the Gas Flow within the Torch

Modeling the Restrike Mode Operation of a DC Plasma Spray Torch

E. Moreau; C. Chazelas; G. Mariaux; A. Vardelle

ITSC 2006; 309-316https://doi.org/10.31399/asm.cp.itsc2006p0309

View Articletitled, Modeling the Restrike Mode Operation of a DC Plasma Spray Torch

Modeling and Validation of Substrate Heat Transfer Coefficient Distribution in Vacuum Plasma Spraying

E.S. Davis; S.R. Duncan; P.S. Grant

ITSC 2006; 317-322https://doi.org/10.31399/asm.cp.itsc2006p0317

View Articletitled, Modeling and Validation of Substrate Heat Transfer Coefficient Distribution in Vacuum Plasma Spraying

Investigation of Splat Curling up in Thermal Spray Coatings

M. Xue; J. Mostaghimi; S. Chandra

ITSC 2006; 323-328https://doi.org/10.31399/asm.cp.itsc2006p0323

View Articletitled, Investigation of Splat Curling up in Thermal Spray Coatings

Monte Carlo Simulation of Thermal Sprayed Coatings

T. Steinke; M. Bäker

ITSC 2006; 329-334https://doi.org/10.31399/asm.cp.itsc2006p0329

View Articletitled, Monte Carlo Simulation of Thermal Sprayed Coatings

Application of Multiscale Modeling in the Coating Formation Simulation of APS-PYSZ-TBCs

E. Lugscheider; K. Bobzin; R. Nickel

ITSC 2006; 335-340https://doi.org/10.31399/asm.cp.itsc2006p0335

View Articletitled, Application of Multiscale Modeling in the Coating Formation Simulation of APS-PYSZ-TBCs

Modeling Thermal Conductivity of Thermal Spray Coatings: Comparing Predictions to Experiments

Y. Tan; J.P. Longtin; S. Sampath

ITSC 2006; 341-346https://doi.org/10.31399/asm.cp.itsc2006p0341

View Articletitled, Modeling Thermal Conductivity of Thermal Spray Coatings: Comparing Predictions to Experiments

Computer Simulation of Particle Velocity in HVO/AF

Bailin Zha; Hangong Wang

ITSC 2006; 347-350https://doi.org/10.31399/asm.cp.itsc2006p0347

View Articletitled, Computer Simulation of Particle Velocity in HVO/AF

Modelling of Motion and Heating of Powder Particles in Laser, Plasma and Hybrid Spraying

Yu. Borisov; A. Bushma; I. Krivtsun

ITSC 2006; 351-356https://doi.org/10.31399/asm.cp.itsc2006p0351

View Articletitled, Modelling of Motion and Heating of Powder Particles in Laser, Plasma and Hybrid Spraying

Applications and Case Studies

SOFC Interconnector Coating using HVOF Process

S.Y. Hwang; J.H. Kim; B.G. Seong; H. Yang

ITSC 2006; 357-360https://doi.org/10.31399/asm.cp.itsc2006p0357

View Articletitled, SOFC Interconnector Coating using HVOF Process

Application of Plasma Sprayed Coatings in a Novel Integrated Composite Seal for SOFCs

X. Huang; K. Ridgeway; S. Narasimhan; K. Reifsnider; X. Ma

ITSC 2006; 361-366https://doi.org/10.31399/asm.cp.itsc2006p0361

View Articletitled, Application of Plasma Sprayed Coatings in a Novel Integrated Composite Seal for SOFCs

Material and Process Considerations for Developing and Qualifying Repair Coatings for Nickel / Chrome Replacement

S. Fitzgerald; C. Edwards; J. Randolph

ITSC 2006; 367-372https://doi.org/10.31399/asm.cp.itsc2006p0367

View Articletitled, Material and Process Considerations for Developing and Qualifying Repair Coatings for Nickel / Chrome Replacement

RF Plasma Deposition of Refractory Metals Case Study for Tungsten

Ondřej Kovářík; Siwen Xue; Xiaobao Fan; Maher Boulos

ITSC 2006; 373-378https://doi.org/10.31399/asm.cp.itsc2006p0373

View Articletitled, RF Plasma Deposition of Refractory Metals Case Study for Tungsten

Advanced Coatings on Furnace Wall Tubes

Y. Matsubara; Y. Sochi; M. Tanabe; A. Takeya

ITSC 2006; 379-384https://doi.org/10.31399/asm.cp.itsc2006p0379

View Articletitled, Advanced Coatings on Furnace Wall Tubes

Simulation Results of Arc Behavior in Different Plasma Spray Torches

J.P. Trelles; J. V. R. Heberlein

ITSC 2006; 385-390https://doi.org/10.31399/asm.cp.itsc2006p0385

View Articletitled, Simulation Results of Arc Behavior in Different Plasma Spray Torches

Comparison of the Photocatalytic Behavior of TiO₂ Coatings Elaborated by Different Thermal Spraying Processes

F.L. Toma; D. Sokolov; G. Bertrand; D. Klein; C. Coddet; C. Meunier

ITSC 2006; 391-396https://doi.org/10.31399/asm.cp.itsc2006p0391

View Articletitled, Comparison of the Photocatalytic Behavior of TiO<sub>2</sub> Coatings Elaborated by Different Thermal Spraying Processes

Thermal Spray Coatings for Tribological Applications in the Automotive Industry

G. Barbezat

ITSC 2006; 397-402https://doi.org/10.31399/asm.cp.itsc2006p0397

View Articletitled, Thermal Spray Coatings for Tribological Applications in the Automotive Industry

Thermal Spray Joining—Soldering and Filling of Aluminum Substrates under Atmospheric Conditions by a Combined Thermal Spray-Fusing Technique

Fr.-W. Bach; K. Möhwald; B. Drößler; D. Kolar

ITSC 2006; 403-408https://doi.org/10.31399/asm.cp.itsc2006p0403

View Articletitled, Thermal Spray Joining—Soldering and Filling of Aluminum Substrates under Atmospheric Conditions by a Combined Thermal Spray-Fusing Technique

Thermal Spray Deposition of Fuel Cell Interconnect Material

E. Garcia; T.W. Coyle

ITSC 2006; 409-414https://doi.org/10.31399/asm.cp.itsc2006p0409

View Articletitled, Thermal Spray Deposition of Fuel Cell Interconnect Material

Characterization of YSZ SOFC Electrolyte Deposited by Atmospheric Plasma Spraying and Low Pressure Plasma Spraying

C. Zhang; H. Liao; W.-Y. Li; C. Coddel; C.-J. Li; C.-X. Li; X.-J. Ning

ITSC 2006; 415-420https://doi.org/10.31399/asm.cp.itsc2006p0415

View Articletitled, Characterization of YSZ SOFC Electrolyte Deposited by Atmospheric Plasma Spraying and Low Pressure Plasma Spraying

Comparison of Atmospheric Plasma Sprayed Anode Layers for SOFCs Using Different Feedstock

D. Hathiramani; R. Vaßen; D. Stöver; R.J. Damani

ITSC 2006; 421-426https://doi.org/10.31399/asm.cp.itsc2006p0421

View Articletitled, Comparison of Atmospheric Plasma Sprayed Anode Layers for SOFCs Using Different Feedstock

Development of Porous Anode Layers for the Solid Oxide Fuel Cell by Plasma Spraying

H. Weckmann; A. Syed; Z. Ilhan; J. Arnold

ITSC 2006; 427-432https://doi.org/10.31399/asm.cp.itsc2006p0427

View Articletitled, Development of Porous Anode Layers for the Solid Oxide Fuel Cell by Plasma Spraying

A Novel Method for Twin-Wire Arc Metallization of Plastic Surfaces using High- Melting Temperature Materials

A. Elmoursi; B. Fuller; N. Patel; T. Van Steenkiste; D. Whitehead

ITSC 2006; 433-438https://doi.org/10.31399/asm.cp.itsc2006p0433

View Articletitled, A Novel Method for Twin-Wire Arc Metallization of Plastic Surfaces using High- Melting Temperature Materials

Coating Bores of Light Metal Crankcases

K. Bobzin; E. Lugscheider; F. Ernst; J. Zwick; T. Schlaefer; C. Verpoort; A. Schwenk; F. Schreiber; T. Wenz; D. Cook; K. Kowalsky; J. Conti

ITSC 2006; 439-442https://doi.org/10.31399/asm.cp.itsc2006p0439

View Articletitled, Coating Bores of Light Metal Crankcases

Graded Coatings for Light Gas Gun Flyer Plate Applications

A.C. Hall; C.M. Weyant; J.L. Wise; C.A. Hall; S.C. Jones; D.A. Urrea; J.F. Mccloskey; J.W. Cates; T.J. Roemer; A.J. Mayer; D.E. Beatty; D.A. Hirschfeld

ITSC 2006; 443-446https://doi.org/10.31399/asm.cp.itsc2006p0443

View Articletitled, Graded Coatings for Light Gas Gun Flyer Plate Applications

Ceramics and Thermal Barrier Coatings

Effects of Ce and Si Addition to CoNiCrAlY Bond-Coat Material on Oxidation Behavior and Bonding Strength of Thermal Barrier Coatings

K. Ogawa; K. Ito; T. Shoji; H. Tezuka; H. Kato

ITSC 2006; 447-452https://doi.org/10.31399/asm.cp.itsc2006p0447

View Articletitled, Effects of Ce and Si Addition to CoNiCrAlY Bond-Coat Material on Oxidation Behavior and Bonding Strength of Thermal Barrier Coatings

Nanostructured Partially Stabilized Zirconia as an Interlayer in a Multi Layered Thermal Barrier Coating

D.N. Guru; J.V.R. Heberlein; W.M. Mook; W.W. Gerberich; C.C. Berndt

ITSC 2006; 453-458https://doi.org/10.31399/asm.cp.itsc2006p0453

View Articletitled, Nanostructured Partially Stabilized Zirconia as an Interlayer in a Multi Layered Thermal Barrier Coating

Low Thermal Conductivity Coatings for Gas Turbine Applications

N. Markocsan; P. Nylén; J. Wigren; X.-H. Li

ITSC 2006; 459-464https://doi.org/10.31399/asm.cp.itsc2006p0459

View Articletitled, Low Thermal Conductivity Coatings for Gas Turbine Applications

Microstructure and Oxidation of MCrAlY Coatings Produced by Various Thermal Spray Processes

M. Shibata; S. Kuroda; M. Watanabe; H. Murakami; M. Ode; Y. Sakamoto

ITSC 2006; 465-470https://doi.org/10.31399/asm.cp.itsc2006p0465

View Articletitled, Microstructure and Oxidation of MCrAlY Coatings Produced by Various Thermal Spray Processes

The Recent Thermal Barrier Coating System in Gas Turbine

S. Kasumi; T. Takahashi; T. Kurimura; M. Mega; T. Torigoe; J. Narita

ITSC 2006; 471-476https://doi.org/10.31399/asm.cp.itsc2006p0471

View Articletitled, The Recent Thermal Barrier Coating System in Gas Turbine

Factors Affecting the Appearance of Air Plasma Sprayed Thermal Barrier Coatings

L. Xie; M. Dorfman; A. Patel; I. Aguilar

ITSC 2006; 477-482https://doi.org/10.31399/asm.cp.itsc2006p0477

View Articletitled, Factors Affecting the Appearance of Air Plasma Sprayed Thermal Barrier Coatings

Effect of Substrate Temperature and Droplet Characteristics on Plasma Sprayed Zirconia Splats

H.R. Salimijazi; L. Pershin; T.W. Coyle; J. Mostaghimi; L. Rosenzweig; E. Moran

ITSC 2006; 483-488https://doi.org/10.31399/asm.cp.itsc2006p0483

View Articletitled, Effect of Substrate Temperature and Droplet Characteristics on Plasma Sprayed Zirconia Splats

Metal-Glass Composites for Application in TBC Systems

D.E. Mack; S.-M. Gross; R. Vaßen; D. Stöver

ITSC 2006; 489-494https://doi.org/10.31399/asm.cp.itsc2006p0489

View Articletitled, Metal-Glass Composites for Application in TBC Systems

Development Of Thin And Gastight Ceramic Coatings By Atmospheric Plasma-Spraying

R. Vaßen; D. Stöver

ITSC 2006; 495-500https://doi.org/10.31399/asm.cp.itsc2006p0495

View Articletitled, Development Of Thin And Gastight Ceramic Coatings By Atmospheric Plasma-Spraying

Corrosion Resistance of SS304 Substrate Coated with Al₂O+ZrO₂ Composite Coatings Prepared by Gas Tunnel Type Plasma Spraying

A. Kobayashi; J. Zhang

ITSC 2006; 501-506https://doi.org/10.31399/asm.cp.itsc2006p0501

View Articletitled, Corrosion Resistance of SS304 Substrate Coated with Al<sub>2</sub>O+ZrO<sub>2</sub> Composite Coatings Prepared by Gas Tunnel Type Plasma Spraying

Tailoring of YSZ Powders to Meet Fixed Process Windows, Parameters, and Properties for Land-Based Turbine Applications

F. Ladru; H. Reymann; M. Mensing; S. Zimmermann; J. Fischer

ITSC 2006; 507-512https://doi.org/10.31399/asm.cp.itsc2006p0507

View Articletitled, Tailoring of YSZ Powders to Meet Fixed Process Windows, Parameters, and Properties for Land-Based Turbine Applications

Process Residual Stresses and High Temperature Oxidation Performance of Thermal Barrier Coatings

C. R. C. Lima; J. Nin; J.M. Guilemany

ITSC 2006; 513-518https://doi.org/10.31399/asm.cp.itsc2006p0513

View Articletitled, Process Residual Stresses and High Temperature Oxidation Performance of Thermal Barrier Coatings

Thermo-Mechanical Behavior of Nanostructured Plasma Sprayed Zirconia Coatings

R. Soltani; E. Garcia; T.W. Coyle; J. Mostaghimi; R.S. Lima; B.R. Marple; C. Moreau

ITSC 2006; 519-524https://doi.org/10.31399/asm.cp.itsc2006p0519

View Articletitled, Thermo-Mechanical Behavior of Nanostructured Plasma Sprayed Zirconia Coatings

Optical Properties of Yttria-Stabilized Zirconia Plasma-Sprayed Coatings

V. Debout; A. Vardelle; P. Abélard; P. Fauchais; E. Meillot; E. Bruneton; S. Schelz; N. Branland

ITSC 2006; 525-530https://doi.org/10.31399/asm.cp.itsc2006p0525

View Articletitled, Optical Properties of Yttria-Stabilized Zirconia Plasma-Sprayed Coatings

Improved Mechanical Properties by Nanoreinforced HVOF-Sprayed Ceramic Composite Coatings

E. Neufuss; Turunen Dyshlovenko; T. Varis; J. Keskinen; T. Fäll; S-P. Hannula

ITSC 2006; 531-536https://doi.org/10.31399/asm.cp.itsc2006p0531

View Articletitled, Improved Mechanical Properties by Nanoreinforced HVOF-Sprayed Ceramic Composite Coatings

Microstructure and Properties of Plasma-sprayed Ultrafine Cr₂O₃ Feedstock Powder and Coating

F. Lin; Y. Yu; K. Zeng; X. Ren; X. Song; Z. Li; Y. Cui

ITSC 2006; 537-540https://doi.org/10.31399/asm.cp.itsc2006p0537

View Articletitled, Microstructure and Properties of Plasma-sprayed Ultrafine Cr<sub>2</sub>O<sub>3</sub> Feedstock Powder and Coating

Ceramic Metastable Powder through Plasma Spraying

I.G. Cano; S. Dosta; J.R. Miguel; J.M. Guilemany

ITSC 2006; 541-544https://doi.org/10.31399/asm.cp.itsc2006p0541

View Articletitled, Ceramic Metastable Powder through Plasma Spraying

Microstructure and Mechanical Properties of Yttria Partially Stabilized Zirconia Coatings Deposited by Laser-Assisted Air Plasma Spraying

L. Dubourg; C. Moreau

ITSC 2006; 545-550https://doi.org/10.31399/asm.cp.itsc2006p0545

View Articletitled, Microstructure and Mechanical Properties of Yttria Partially Stabilized Zirconia Coatings Deposited by Laser-Assisted Air Plasma Spraying

Development of Zirconia Coatings by HFPD

I. Fagoaga; M. Parco; G. Barykin; C. Vaquero; J. de Juan

ITSC 2006; 551-556https://doi.org/10.31399/asm.cp.itsc2006p0551

View Articletitled, Development of Zirconia Coatings by HFPD

Ceramic Coatings Prepared by Plasma Spraying for Semiconductor Production Equipment

N. Kato; H. Mizuno; H. Ibe; J. Kitamura

ITSC 2006; 557-562https://doi.org/10.31399/asm.cp.itsc2006p0557

View Articletitled, Ceramic Coatings Prepared by Plasma Spraying for Semiconductor Production Equipment

Flame Spraying of Titania and Magnetite

S.S. Morton; D.A. Hirschfeld; A.C. Hall

ITSC 2006; 563-568https://doi.org/10.31399/asm.cp.itsc2006p0563

View Articletitled, Flame Spraying of Titania and Magnetite

Photocatalytic Function of FeTiO₃ in Composite TiO₂-FeTiO₃ Coatings Prepared by Plasma Spray

F.-X. Ye; A. Ohmori; T. Tsumura; K. Nakata; C.-J. Li

ITSC 2006; 569-574https://doi.org/10.31399/asm.cp.itsc2006p0569

View Articletitled, Photocatalytic Function of FeTiO<sub>3</sub> in Composite TiO<sub>2</sub>-FeTiO<sub>3</sub> Coatings Prepared by Plasma Spray

Corrosion Protection

Hot Salt Corrosion Behavior of High Velocity Arc Sprayed Fe-Al Based Composite Coatings

W. Zhang; W. Xu; B. Xu

ITSC 2006; 575-578https://doi.org/10.31399/asm.cp.itsc2006p0575

View Articletitled, Hot Salt Corrosion Behavior of High Velocity Arc Sprayed Fe-Al Based Composite Coatings

Cyclic Oxidation Behaviour of Plasma Sprayed Stellite-6 Coated Ni-Base Superalloys

H. Singh; D. Puri; S. Prakash

ITSC 2006; 579-584https://doi.org/10.31399/asm.cp.itsc2006p0579

View Articletitled, Cyclic Oxidation Behaviour of Plasma Sprayed Stellite-6 Coated Ni-Base Superalloys

Effect of WC Addition in Ni-Cr Matrix on Performance as Coatings for Corrosion/Erosion Protection of Heat Exchanger Materials

S. Kumari; A.S. Khanna

ITSC 2006; 585-590https://doi.org/10.31399/asm.cp.itsc2006p0585

View Articletitled, Effect of WC Addition in Ni-Cr Matrix on Performance as Coatings for Corrosion/Erosion Protection of Heat Exchanger Materials

Manufacturing of Corrosion Resistant Coatings Using Laser Assisted Thermal Spraying

J. Suutala; J. Tuominen; P. Vuoristo

ITSC 2006; 591-596https://doi.org/10.31399/asm.cp.itsc2006p0591

View Articletitled, Manufacturing of Corrosion Resistant Coatings Using Laser Assisted Thermal Spraying

Corrosion Behaviour of Ni-5Al/WC-12Co HVOF Coating Systems

A. Lekatou; N. Gavrilakis; D. Grimanelis

ITSC 2006; 597-602https://doi.org/10.31399/asm.cp.itsc2006p0597

View Articletitled, Corrosion Behaviour of Ni-5Al/WC-12Co HVOF Coating Systems

Hot Corrosion Behaviour of HVOF Sprayed Coatings on ASTM SA213-T11 Steel

H.S. Sidhu; B.S. Sidhu; S. Prakash

ITSC 2006; 603-608https://doi.org/10.31399/asm.cp.itsc2006p0603

View Articletitled, Hot Corrosion Behaviour of HVOF Sprayed Coatings on ASTM SA213-T11 Steel

High Velocity Oxyfuel Thermal Spraying

Cracking and Spalling Behavior of WC-17% Co Cermet Coatings

J.-G. Legoux; S. Bouaricha; J.P. Sauer

ITSC 2006; 609-614https://doi.org/10.31399/asm.cp.itsc2006p0609

View Articletitled, Cracking and Spalling Behavior of WC-17% Co Cermet Coatings

HVOF-Applied WC-Co-Cr as a Hard Chrome Replacement for Landing Gear

B. Evans; R. Panza-Giosa; E. Cochien Brikaras; S. Maitland

ITSC 2006; 615-618https://doi.org/10.31399/asm.cp.itsc2006p0615

View Articletitled, HVOF-Applied WC-Co-Cr as a Hard Chrome Replacement for Landing Gear

Fatigue Fracture Mechanism of HVAF Sprayed Low Alloy Steel

M. Liu; C. Deng; K. Zhou; J. Song; C. Wu

ITSC 2006; 619-624https://doi.org/10.31399/asm.cp.itsc2006p0619

View Articletitled, Fatigue Fracture Mechanism of HVAF Sprayed Low Alloy Steel

Microstructure and Properties of Thermally Sprayed Al-Sn based Alloys for Plain Bearing Applications

T. Marrocco; L.C. Driver; S.J. Harris; D.G. McCartney

ITSC 2006; 625-630https://doi.org/10.31399/asm.cp.itsc2006p0625

View Articletitled, Microstructure and Properties of Thermally Sprayed Al-Sn based Alloys for Plain Bearing Applications

Processing and Properties of Titanium Coating Produced by Warm Spraying

T. Wu; S. Kuroda; J. Kawakita; H. Katanoda; R. Reed

ITSC 2006; 631-636https://doi.org/10.31399/asm.cp.itsc2006p0631

View Articletitled, Processing and Properties of Titanium Coating Produced by Warm Spraying

Analysis of Potential Improvements of HVOF Based Processes

A. Voronetski; V. Belashchenko

ITSC 2006; 637-642https://doi.org/10.31399/asm.cp.itsc2006p0637

View Articletitled, Analysis of Potential Improvements of HVOF Based Processes

AC-HVAF Sprayed Tungsten Carbide: Properties and Applications

A. Verstak; V. Baranovski

ITSC 2006; 643-648https://doi.org/10.31399/asm.cp.itsc2006p0643

View Articletitled, AC-HVAF Sprayed Tungsten Carbide: Properties and Applications

Roughness Enhancement of HVOF Sprayed MCrAlY Bond Coatings for Adhesion Improvement of Ceramic Top Layers

Fr.-W. Bach; K. Mohwald; L. Engl; T. Duda

ITSC 2006; 649-654https://doi.org/10.31399/asm.cp.itsc2006p0649

View Articletitled, Roughness Enhancement of HVOF Sprayed MCrAlY Bond Coatings for Adhesion Improvement of Ceramic Top Layers

Effect of Particle Impact on Residual Stress Development In HVOF Sprayed Coatings

P. Bansal; P.H. Shipway; S.B. Leen

ITSC 2006; 655-660https://doi.org/10.31399/asm.cp.itsc2006p0655

View Articletitled, Effect of Particle Impact on Residual Stress Development In HVOF Sprayed Coatings

Finite Element Analysis of Residual Stress Generated by the HVOF Process

J. Stokes; L. Looney

ITSC 2006; 661-666https://doi.org/10.31399/asm.cp.itsc2006p0661

View Articletitled, Finite Element Analysis of Residual Stress Generated by the HVOF Process

The Effect of the Substrate Hardness on Particle Morphology in High Velocity Thermal Spray Coatings

W. Neufuss; Trompetter Dyshlovenko; A. Markwitz; M. Hyland; D. McGrouther; P. Munroe

ITSC 2006; 667-672https://doi.org/10.31399/asm.cp.itsc2006p0667

View Articletitled, The Effect of the Substrate Hardness on Particle Morphology in High Velocity Thermal Spray Coatings

Coating Properties of HVOF Sprayed Carbide-based Ultrafine Powders

G. Matthäus; K. Bobzin; E. Lugscheider; J. Zwick

ITSC 2006; 673-678https://doi.org/10.31399/asm.cp.itsc2006p0673

View Articletitled, Coating Properties of HVOF Sprayed Carbide-based Ultrafine Powders

Characterisations and Corrosion Resistance of HVOF Cr₃C₂-NiCr on Ni-Base Superalloys at 900°C in Molten Salt Environment

T.S. Sidhu; S. Prakash; R.D. Agrawal

ITSC 2006; 679-684https://doi.org/10.31399/asm.cp.itsc2006p0679

View Articletitled, Characterisations and Corrosion Resistance of HVOF Cr<sub>3</sub>C<sub>2</sub>-NiCr on Ni-Base Superalloys at 900°C in Molten Salt Environment

The Effects of Ceria Addition to HVOF Thermal Sprayed NiAl Intermetallic Coatings

Y. Wang; G. Liu; W. Tian

ITSC 2006; 685-688https://doi.org/10.31399/asm.cp.itsc2006p0685

View Articletitled, The Effects of Ceria Addition to HVOF Thermal Sprayed NiAl Intermetallic Coatings

HVAF Sprayed Composite Coating with Ni-base Self-Fluxing Alloy and WC on a Copper Substrate

C.Q. Wu; K.S. Zhou; C.G. Deng; C.M. Deng

ITSC 2006; 689-692https://doi.org/10.31399/asm.cp.itsc2006p0689

View Articletitled, HVAF Sprayed Composite Coating with Ni-base Self-Fluxing Alloy and WC on a Copper Substrate

Study of Dynamic Diffusion Bonding of 90MnCrV8 High Strength Steel Coated with WC-Co Obtained by HVOF Thermal Spray

J.M. Gómez de Salazar; M.I. Barrena; L. Matesanz; J.M. Guilemany; S. Dosta; J.R. Miguel

ITSC 2006; 693-696https://doi.org/10.31399/asm.cp.itsc2006p0693

View Articletitled, Study of Dynamic Diffusion Bonding of 90MnCrV8 High Strength Steel Coated with WC-Co Obtained by HVOF Thermal Spray

Nanostructured Materials

Relationship Between the Suspension Properties and Liquid Plasma Sprayed Coating Characteristics

F.L. Toma; G. Bertrand; R. Rampon; D. Klein; C. Coddet

ITSC 2006; 697-702https://doi.org/10.31399/asm.cp.itsc2006p0697

View Articletitled, Relationship Between the Suspension Properties and Liquid Plasma Sprayed Coating Characteristics

A New High Velocity Oxy-Fuel Process for Making Finely Structured and Highly Bonded Alloy Layers from Liquid Precursors

X.Q. Ma; J. Roth; D.W. Gandy; G.J. Frederick

ITSC 2006; 703-708https://doi.org/10.31399/asm.cp.itsc2006p0703

View Articletitled, A New High Velocity Oxy-Fuel Process for Making Finely Structured and Highly Bonded Alloy Layers from Liquid Precursors

Suspension Plasma Spraying of Nanostructured WC-12 Co Coatings

J. Oberste Berghaus; B. Marple; C. Moreau

ITSC 2006; 709-714https://doi.org/10.31399/asm.cp.itsc2006p0709

View Articletitled, Suspension Plasma Spraying of Nanostructured WC-12 Co Coatings

Microstructure and Electronic Emission of Plasma Sprayed TiO₂ Functional Coating with Gradient of Crystal Grain Size

R. Tomaszek; L. Pawlowski; L. Gengembre; J. Laureyns; Z. Znamirowski; J. Zdanowski

ITSC 2006; 715-720https://doi.org/10.31399/asm.cp.itsc2006p0715

View Articletitled, Microstructure and Electronic Emission of Plasma Sprayed TiO<sub>2</sub> Functional Coating with Gradient of Crystal Grain Size

Atmospheric Plasma Spraying of High-Energy Ball-Milled Al₂O₃-TiO₂ Powders

S. Coste; G. Bertrand; C. Coddet; E. Gaffet; H. Hahn; H. Sieger; C. Meunier; S. Vives

ITSC 2006; 721-726https://doi.org/10.31399/asm.cp.itsc2006p0721

View Articletitled, Atmospheric Plasma Spraying of High-Energy Ball-Milled Al<sub>2</sub>O<sub>3</sub>-TiO<sub>2</sub> Powders

Processing Strategies for Tailoring Ceramic-Based Nanostructured Thermal Spray Coatings

B.R. Marple; R.S. Lima

ITSC 2006; 727-732https://doi.org/10.31399/asm.cp.itsc2006p0727

View Articletitled, Processing Strategies for Tailoring Ceramic-Based Nanostructured Thermal Spray Coatings

Wear and Corrosion Resistant Amorphous / Nanostructured Steel Coatings For Replacement of Electrolytic Hard Chromium

D.J. Branagan; M.C. Marshall; B.E. Meacham; L.F. Aprigliano; R. Bayles; E.J. Lemieux; T. Newbauer; F.J. Martin; J.C. Farmer; J.J. Haslam; S.D. Day

ITSC 2006; 733-738https://doi.org/10.31399/asm.cp.itsc2006p0733

View Articletitled, Wear and Corrosion Resistant Amorphous / Nanostructured Steel Coatings For Replacement of Electrolytic Hard Chromium

Development and Characterization of Nanostructured Iron-Based Coatings by HFPD and HVOF

M. Parco; I. Fagoaga; K. Bobzin; E. Lugscheider; J. Zwick; G. Hidalgo

ITSC 2006; 739-744https://doi.org/10.31399/asm.cp.itsc2006p0739

View Articletitled, Development and Characterization of Nanostructured Iron-Based Coatings by HFPD and HVOF

A Novel Nano-Composite Wire Material: The Low Cost and Enhanced Properties Coating Design

P. Georgieva; R. Thorpe; A. Yanski; S. Seal

ITSC 2006; 745-750https://doi.org/10.31399/asm.cp.itsc2006p0745

View Articletitled, A Novel Nano-Composite Wire Material: The Low Cost and Enhanced Properties Coating Design

Liquid Plasma Sprayed Coatings of Yttria Stabilized Zirconia for SOFC Electrolytes

R. Rampon; G. Bertrand; F.-L. Toma; C. Coddet

ITSC 2006; 751-756https://doi.org/10.31399/asm.cp.itsc2006p0751

View Articletitled, Liquid Plasma Sprayed Coatings of Yttria Stabilized Zirconia for SOFC Electrolytes

Nanostructured Photocatalytic Titania Coatings Elaborated by Suspension Plasma Spraying

F.-L. Toma; G. Bertrand; S. Lamy; D. Klein; C. Coddet; C. Meunier

ITSC 2006; 757-762https://doi.org/10.31399/asm.cp.itsc2006p0757

View Articletitled, Nanostructured Photocatalytic Titania Coatings Elaborated by Suspension Plasma Spraying

Mechanical Properties of Plasma Sprayed Alumina-Zirconia Nano-composite Film

S. Sodeoka; M. Suzuki; T. Inoue

ITSC 2006; 763-768https://doi.org/10.31399/asm.cp.itsc2006p0763

View Articletitled, Mechanical Properties of Plasma Sprayed Alumina-Zirconia Nano-composite Film

Proven and Promising Applications of Thermal Sprayed Nanostructured Coatings

G.E. Kim

ITSC 2006; 769-774https://doi.org/10.31399/asm.cp.itsc2006p0769

View Articletitled, Proven and Promising Applications of Thermal Sprayed Nanostructured Coatings

Nanostructured Abradable Coatings for High Temperature Applications

R.S. Lima; B.R. Marple; A. Dadouche; W. Dmochowski; B. Liko

ITSC 2006; 775-780https://doi.org/10.31399/asm.cp.itsc2006p0775

View Articletitled, Nanostructured Abradable Coatings for High Temperature Applications

Study on Properties and Microstructure of Nanostructured Ceramic Composite Coatings Prepared by High-Velocity Arc Spraying

Z.x. Li; J.P. Wang; L. Cui

ITSC 2006; 781-786https://doi.org/10.31399/asm.cp.itsc2006p0781

View Articletitled, Study on Properties and Microstructure of Nanostructured Ceramic Composite Coatings Prepared by High-Velocity Arc Spraying

Fabrication of Nanostructured TiO₂ Fibers on TiO₂ Coatings Produced from a Nanostructured Feedstock

R.S. Lima; B.R. Marple; H. Lee; S.A. Akbar

ITSC 2006; 787-790https://doi.org/10.31399/asm.cp.itsc2006p0787

View Articletitled, Fabrication of Nanostructured TiO<sub>2</sub> Fibers on TiO<sub>2</sub> Coatings Produced from a Nanostructured Feedstock

Nanophased WC-12Co Thermal Spray Coatings for Wear Resistant Applications

N. Petsas; G. Papapanos; M. Vardavoulias; A. Moutsatsou; J.P. Celis; P. Matteazzi

ITSC 2006; 791-796https://doi.org/10.31399/asm.cp.itsc2006p0791

View Articletitled, Nanophased WC-12Co Thermal Spray Coatings for Wear Resistant Applications

Plasma Spraying

Effects of Powder Injection on Deposit Efficiency in Plasma Spraying

S. Abukawa; T. Takabatake; K. Tani

ITSC 2006; 797-802https://doi.org/10.31399/asm.cp.itsc2006p0797

View Articletitled, Effects of Powder Injection on Deposit Efficiency in Plasma Spraying

Instabilities in Plasma Spray Jets

D. Outcalt; M. Hallberg; G. Yang; J. Heberlein; E. Pfender; P. Strykowski

ITSC 2006; 803-808https://doi.org/10.31399/asm.cp.itsc2006p0803

View Articletitled, Instabilities in Plasma Spray Jets

Effect of Powder Gas on Low Pressure Plasma Sprayed Yttria Coatings

S. Young; A.C. Hall; D. Huskisson; D.A. Hirschfeld; E. Muehlberger; D. Barbash

ITSC 2006; 809-814https://doi.org/10.31399/asm.cp.itsc2006p0809

View Articletitled, Effect of Powder Gas on Low Pressure Plasma Sprayed Yttria Coatings

Vacuum Plasma Spraying of Thick W Coatings onto Surface Sculptures for Fusion Armour Applications

G. Thomas; P.S. Grant; P. Coad; G. Matthews; R. Castro

ITSC 2006; 815-820https://doi.org/10.31399/asm.cp.itsc2006p0815

View Articletitled, Vacuum Plasma Spraying of Thick W Coatings onto Surface Sculptures for Fusion Armour Applications

Mechanical Properties of Plasma Sprayed Titania Coatings

P. Ctibor; K. Neufuss; P. Chraska

ITSC 2006; 821-826https://doi.org/10.31399/asm.cp.itsc2006p0821

View Articletitled, Mechanical Properties of Plasma Sprayed Titania Coatings

Preparation of an SOFC LSM/YSZ Composite Cathode by Air Plasma Spraying

B.D. White; O. Kesler; N. Ben-Oved; A. Burgess

ITSC 2006; 827-832https://doi.org/10.31399/asm.cp.itsc2006p0827

View Articletitled, Preparation of an SOFC LSM/YSZ Composite Cathode by Air Plasma Spraying

Improving Plasma Sprayed YSZ Coatings for SOFC Electrolytes

A.A. Syed; Z. Ilhan; J. Arnold; G. Schiller; H. Weckmann

ITSC 2006; 833-840https://doi.org/10.31399/asm.cp.itsc2006p0833

View Articletitled, Improving Plasma Sprayed YSZ Coatings for SOFC Electrolytes

Improvement of Plasma Spraying Conditions for SOFC Applications: Effect of Nozzle Geometry and Gas Shrouds

T. Kavka; R. Henne; J. Arnold

ITSC 2006; 841-846https://doi.org/10.31399/asm.cp.itsc2006p0841

View Articletitled, Improvement of Plasma Spraying Conditions for SOFC Applications: Effect of Nozzle Geometry and Gas Shrouds

High Velocity DC-VPS for Diffusion and Protecting Barrier Layers in SOFCs

R.H. Henne; T. Franco; R. Ruckdäschel

ITSC 2006; 847-852https://doi.org/10.31399/asm.cp.itsc2006p0847

View Articletitled, High Velocity DC-VPS for Diffusion and Protecting Barrier Layers in SOFCs

Effect of Copper Ion Doping on Photocatalytic Performance of Liquid Flame Sprayed TiO₂ Coatings

G.-J. Yang; C.-J. Li; C.-X. Li; Y.-Y. Wang; X.-C. Huang

ITSC 2006; 853-858https://doi.org/10.31399/asm.cp.itsc2006p0853

View Articletitled, Effect of Copper Ion Doping on Photocatalytic Performance of Liquid Flame Sprayed TiO<sub>2</sub> Coatings

Spraying of Agglomerated TiO₂ Nanopowder by Water-Stabilized Plasma

P. Ctibor; K. Neufuss; J. Dubsky; B. Kolman; P. Rohan; P. Chraska

ITSC 2006; 859-864https://doi.org/10.31399/asm.cp.itsc2006p0859

View Articletitled, Spraying of Agglomerated TiO<sub>2</sub> Nanopowder by Water-Stabilized Plasma

Influence of Feedstock Powder in Reactive Plasma Spraying for Fabrication of Aluminum Nitride Coatings

M. Yamada; C.C. Lee; Y. Kouzaki; T. Yasui; M. Fukumoto; K. Takahashi

ITSC 2006; 865-870https://doi.org/10.31399/asm.cp.itsc2006p0865

View Articletitled, Influence of Feedstock Powder in Reactive Plasma Spraying for Fabrication of Aluminum Nitride Coatings

Plasma Spray Synthesis from Precursors: Progress, Issues and Considerations

B.G. Ravi; S. Sampath; R. Gambino; P.S. Devi; J.B. Parise

ITSC 2006; 871-876https://doi.org/10.31399/asm.cp.itsc2006p0871

View Articletitled, Plasma Spray Synthesis from Precursors: Progress, Issues and Considerations

Examination of Substrate Surface Melting-Induced Splashing During Splat Formation in Plasma Spraying

C.-J. Li; C.-X. Li; G.-J. Yang; Y.-Y. Wang

ITSC 2006; 877-882https://doi.org/10.31399/asm.cp.itsc2006p0877

View Articletitled, Examination of Substrate Surface Melting-Induced Splashing During Splat Formation in Plasma Spraying

Photographing Impact of Plasma-Sprayed Particles on Metal Substrates

A. McDonald; S. Chandra; M. Lamontagne; C. Moreau

ITSC 2006; 883-888https://doi.org/10.31399/asm.cp.itsc2006p0883

View Articletitled, Photographing Impact of Plasma-Sprayed Particles on Metal Substrates

Impact of Partially Molten Plasma-Sprayed Zirconia Particles on Glass Surfaces

A. McDonald; S. Chandra; C. Moreau

ITSC 2006; 889-894https://doi.org/10.31399/asm.cp.itsc2006p0889

View Articletitled, Impact of Partially Molten Plasma-Sprayed Zirconia Particles on Glass Surfaces

Fragmentation of Plasma-Sprayed Molybdenum Particles on Glass Surfaces

A. McDonald; M. Raessi; S. Chandra; J. Mostaghimi; C. Moreau

ITSC 2006; 895-900https://doi.org/10.31399/asm.cp.itsc2006p0895

View Articletitled, Fragmentation of Plasma-Sprayed Molybdenum Particles on Glass Surfaces

Phase Transformation of Al-Cu-Cr Quasicrystalline Coatings in the Plasma Spray Processes

Y.Q. Fu; Y. Gao; Z.K. Hei

ITSC 2006; 901-904https://doi.org/10.31399/asm.cp.itsc2006p0901

View Articletitled, Phase Transformation of Al-Cu-Cr Quasicrystalline Coatings in the Plasma Spray Processes

Mapping Deposition Parameters and Microstructures of Plasma Sprayed Spinel

H. Samadi; T.W. Coyle

ITSC 2006; 905-910https://doi.org/10.31399/asm.cp.itsc2006p0905

View Articletitled, Mapping Deposition Parameters and Microstructures of Plasma Sprayed Spinel

Shrouded Plasma Processing of Solution Precursors

R.K. Sadangi; V. Shukla; B.H. Kear

ITSC 2006; 911-916https://doi.org/10.31399/asm.cp.itsc2006p0911

View Articletitled, Shrouded Plasma Processing of Solution Precursors

Thermal Spraying of Polymers

Polyamide-11 Powder Coatings by Flame Spraying

T.P. McAndrew; F. Céré

ITSC 2006; 917-922https://doi.org/10.31399/asm.cp.itsc2006p0917

View Articletitled, Polyamide-11 Powder Coatings by Flame Spraying

Effect of Substrate Surface Topography and Temperature on Millimeter and Micrometer Sized Splat Formation and on Thermal Contact Resistance

G. Zhang; H. Liao; M. Cherigui; C. Coddet

ITSC 2006; 923-928https://doi.org/10.31399/asm.cp.itsc2006p0923

View Articletitled, Effect of Substrate Surface Topography and Temperature on Millimeter and Micrometer Sized Splat Formation and on Thermal Contact Resistance

HVOF Sprayed Multi-Scale Polymer/Ceramic Composite Coatings

V. Gupta; S. Niezgoda; R. Knight; T.E. Twardowski; R.A. Cairncross

ITSC 2006; 929-934https://doi.org/10.31399/asm.cp.itsc2006p0929

View Articletitled, HVOF Sprayed Multi-Scale Polymer/Ceramic Composite Coatings

Wetting and Spreading of PEEK Single Splats on Aluminium

B.P. Withy; M.M. Hyland; B.J. James

ITSC 2006; 935-940https://doi.org/10.31399/asm.cp.itsc2006p0935

View Articletitled, Wetting and Spreading of PEEK Single Splats on Aluminium

Effect of Reinforcement Size on the Scratch Resistance and Crystallinity of HVOF Sprayed Nylon-11/Ceramic Composite Coatings

S. Niezgoda; V. Gupta; R. Knight; R.A. Cairncross; T.E. Twardowski

ITSC 2006; 941-946https://doi.org/10.31399/asm.cp.itsc2006p0941

View Articletitled, Effect of Reinforcement Size on the Scratch Resistance and Crystallinity of HVOF Sprayed Nylon-11/Ceramic Composite Coatings

Effect of Substrate Roughness on Splatting Behavior of HVOF Sprayed Polymer Particles: Modeling and Experiments

M. Ivosevic; V. Gupta; R.A. Cairncross; T.E. Twardowski; R. Knight; J.A. Baldoni

ITSC 2006; 947-952https://doi.org/10.31399/asm.cp.itsc2006p0947

View Articletitled, Effect of Substrate Roughness on Splatting Behavior of HVOF Sprayed Polymer Particles: Modeling and Experiments

Properties of Polymer Coatings Fabricated by Low Temperature High Velocity Air Fuel Spraying

Xiaojing Yuan; Hangong Wang; Genliang Hou; Bailin Zha

ITSC 2006; 953-958https://doi.org/10.31399/asm.cp.itsc2006p0953

View Articletitled, Properties of Polymer Coatings Fabricated by Low Temperature High Velocity Air Fuel Spraying

Process Diagnostics and Control

On the Reproducibility of Air Plasma Spray Process and Control of Particle State

V. Srinivasan; A. Vaidya; T. Streibl; M. Friis; S. Sampath

ITSC 2006; 959-964https://doi.org/10.31399/asm.cp.itsc2006p0959

View Articletitled, On the Reproducibility of Air Plasma Spray Process and Control of Particle State

Implementation of Neural Networks into Modern Process Control Equipment

R. Schmitt; J. Doeren; F. Bobzin; E. Lugscheider; F. Ernst

ITSC 2006; 965-970https://doi.org/10.31399/asm.cp.itsc2006p0965

View Articletitled, Implementation of Neural Networks into Modern Process Control Equipment

Influence and Significance of Noise Factors in Plasma Sprayed Surface Coatings

K. Bobzin; E. Lugscheider; F. Ernst; J. Zwick; K. Richardt; K. Landes; G. Forster

ITSC 2006; 971-974https://doi.org/10.31399/asm.cp.itsc2006p0971

View Articletitled, Influence and Significance of Noise Factors in Plasma Sprayed Surface Coatings

Sensing, Control, and Insitu Extraction of Coating Properties: An Integrated Approach towards Establishing Process Maps

S. Sampath; V. Srinivasan; A. Vaidya; A. Gouldstone; Y. Liu; T. Nakamura

ITSC 2006; 975-980https://doi.org/10.31399/asm.cp.itsc2006p0975

View Articletitled, Sensing, Control, and <em>Insitu</em> Extraction of Coating Properties: An Integrated Approach towards Establishing Process Maps

A New Approach to Online Thickness Measurement of Thermal Spray Coatings

A. Nadeau; L. Pouliot; F. Nadeau; J. Blain; S.A. Berube; C. Moreau; M. Lamontagne

ITSC 2006; 981-986https://doi.org/10.31399/asm.cp.itsc2006p0981

View Articletitled, A New Approach to Online Thickness Measurement of Thermal Spray Coatings

Investigation of Time-Dependent Instabilities of Plasma Spraying Process Using Online Diagnostic Systems

H. Weckmann; S. Fiebig; A. Syed; J. Arnold

ITSC 2006; 987-992https://doi.org/10.31399/asm.cp.itsc2006p0987

View Articletitled, Investigation of Time-Dependent Instabilities of Plasma Spraying Process Using Online Diagnostic Systems

Effect of Substrate Surface Topography and Temperature, on Millimeter and Micrometer Sized Splat Formation and on Thermal Contact Resistance

J. Cedelle; M. Vardelle; P. Fauchais; Y. Tanaka

ITSC 2006; 993-998https://doi.org/10.31399/asm.cp.itsc2006p0993

View Articletitled, Effect of Substrate Surface Topography and Temperature, on Millimeter and Micrometer Sized Splat Formation and on Thermal Contact Resistance

Study on the Influences of DPV-2000 Software Parameters on the Measured Results in Cold Spray

R.Z. Huang; B. Sun; N. Ohno; H. Fukanuma

ITSC 2006; 999-1004https://doi.org/10.31399/asm.cp.itsc2006p0999

View Articletitled, Study on the Influences of DPV-2000 Software Parameters on the Measured Results in Cold Spray

Effective Spectral Emissivity Measurement of Thermally Sprayed YSZ Thermal Barrier Coating at High Temperature Using a Wide-Band Single Wavelength Pyrometer

L. Moulla; M.P. Planche; C. Coddet

ITSC 2006; 1005-1008https://doi.org/10.31399/asm.cp.itsc2006p1005

View Articletitled, Effective Spectral Emissivity Measurement of Thermally Sprayed YSZ Thermal Barrier Coating at High Temperature Using a Wide-Band Single Wavelength Pyrometer

Tailoring of Wire Feedstock and Processing Conditions in High Velocity Combustion Wire Spraying

B. Wielage; A. Wank; C. Rupprecht

ITSC 2006; 1009-1014https://doi.org/10.31399/asm.cp.itsc2006p1009

View Articletitled, Tailoring of Wire Feedstock and Processing Conditions in High Velocity Combustion Wire Spraying

Effect of Torch Hardware and Operating Parameters on Oxy-Acetylene Powder Flame Spray Heat Flux

J.W. Cates; D.A. Urrea; A.C. Hall; R.A. Neiser; M.F. Smith; D.E. Beatty; A.J. Mayer; T.J. Roemer; D.A. Hirschfeld; D.J. Cook

ITSC 2006; 1015-1020https://doi.org/10.31399/asm.cp.itsc2006p1015

View Articletitled, Effect of Torch Hardware and Operating Parameters on Oxy-Acetylene Powder Flame Spray Heat Flux

High Speed Visualization and Plume Characterization of Hybrid Spray Process

J. Stanisic; D. Kosikowski; P.S. Mohanty

ITSC 2006; 1021-1026https://doi.org/10.31399/asm.cp.itsc2006p1021

View Articletitled, High Speed Visualization and Plume Characterization of Hybrid Spray Process

Prospect for Plasma Spray Process On-Line Control Via Artificial Intelligence (Neural Networks and Fuzzy Logic)

A.F. Kanta; G. Montavon; M.P. Planche; C. Coddet

ITSC 2006; 1027-1034https://doi.org/10.31399/asm.cp.itsc2006p1027

View Articletitled, Prospect for Plasma Spray Process On-Line Control Via Artificial Intelligence (Neural Networks and Fuzzy Logic)

Properties, Characterization, and Testing

Simulations of Curvature Evolution Splat-Substrate Systems under Thermal Cycling

M. Qu; Y. Wu; A. Gouldstone

ITSC 2006; 1035-1038https://doi.org/10.31399/asm.cp.itsc2006p1035

View Articletitled, Simulations of Curvature Evolution Splat-Substrate Systems under Thermal Cycling

Ultrasonic Testing of the Splat-Substrate Interface

M. Ducos; B. Bossuat; H. Walaszek; S. Barradas; M. Jeandin

ITSC 2006; 1039-1044https://doi.org/10.31399/asm.cp.itsc2006p1039

View Articletitled, Ultrasonic Testing of the Splat-Substrate Interface

Influence of Surface Character Change of Substrate due to Heating on Flattening Behavior of Thermal Sprayed Particle

M. Fukumoto; H. Nagai; T. Yasui

ITSC 2006; 1045-1050https://doi.org/10.31399/asm.cp.itsc2006p1045

View Articletitled, Influence of Surface Character Change of Substrate due to Heating on Flattening Behavior of Thermal Sprayed Particle

Method for Quantitative Evaluation of Carbon and Carbide Loss during HVOF Spraying of Cr₃C₂-NiCr Coating

G.-C. Ji; C.-J. Li; Y.-Y. Wang; W.-Y. Li; G.-J. Yang

ITSC 2006; 1051-1054https://doi.org/10.31399/asm.cp.itsc2006p1051

View Articletitled, Method for Quantitative Evaluation of Carbon and Carbide Loss during HVOF Spraying of Cr<sub>3</sub>C<sub>2</sub>-NiCr Coating

Reactively Thermal Sprayed Composite Coatings with Different Particle Temperature and Velocity

Y. Tsunekawa; I. Hamanaka; M. Hirose; M. Okumiya; I. Ozdemir

ITSC 2006; 1055-1060https://doi.org/10.31399/asm.cp.itsc2006p1055

View Articletitled, Reactively Thermal Sprayed Composite Coatings with Different Particle Temperature and Velocity

Deposition of Nickel-Aluminide Coatings by Gaseous Detonation Spraying

Y.A. Kharlamov; M.Y. Kharlamov

ITSC 2006; 1061-1066https://doi.org/10.31399/asm.cp.itsc2006p1061

View Articletitled, Deposition of Nickel-Aluminide Coatings by Gaseous Detonation Spraying

Evaluation of Adhesion Strength and Residual Stress of HVOF Sprayed Metallic Coatings

K. Yokoyama; M. Watanabe; S. Kuroda; Y. Gotoh

ITSC 2006; 1067-1072https://doi.org/10.31399/asm.cp.itsc2006p1067

View Articletitled, Evaluation of Adhesion Strength and Residual Stress of HVOF Sprayed Metallic Coatings

Effects of Coating-Substrate Properties and Adhesion on Indentation Results

J.H. Kim; A. Gouldstone; N. Chollacoop

ITSC 2006; 1073-1076https://doi.org/10.31399/asm.cp.itsc2006p1073

View Articletitled, Effects of Coating-Substrate Properties and Adhesion on Indentation Results

Optical Coherence Tomography for the Inspection of Plasma-Sprayed Ceramic Coatings

J. Veilleux; M. Boulos; C. Moreau; D. Lévesque; M. Dufour

ITSC 2006; 1077-1082https://doi.org/10.31399/asm.cp.itsc2006p1077

View Articletitled, Optical Coherence Tomography for the Inspection of Plasma-Sprayed Ceramic Coatings

Microstructure and Properties of New Abradable Seal Coatings for Compressor Applications

K. Bobzin; E. Lugscheider; J. Zwick; F. Ernst; D. Sporer; N. Hopkins; M. Hertter; J. Matejicek

ITSC 2006; 1083-1088https://doi.org/10.31399/asm.cp.itsc2006p1083

View Articletitled, Microstructure and Properties of New Abradable Seal Coatings for Compressor Applications

Characterization of AlCuFeB Quasicrystalline Coatings Sprayed by APS

A. Stihle; H. Liao; P. Bertrand; N. Allain; C. Coddet; S. Kenzari

ITSC 2006; 1089-1092https://doi.org/10.31399/asm.cp.itsc2006p1089

View Articletitled, Characterization of AlCuFeB Quasicrystalline Coatings Sprayed by APS

Exploring Thermal Spray Grey Alumina Coating Pore Network Architecture by Combining Stereological Protocols and Impedance Electrochemical Spectroscopy

G. Antou; G. Montavon; F. Hlawka; A. Cornet; C. Coddet

ITSC 2006; 1093-1100https://doi.org/10.31399/asm.cp.itsc2006p1093

View Articletitled, Exploring Thermal Spray Grey Alumina Coating Pore Network Architecture by Combining Stereological Protocols and Impedance Electrochemical Spectroscopy

Advanced Particle Characterization for Improved Understanding of Spray Coating Quality

E. Pirard; F. Campana; J.P. Janssen

ITSC 2006; 1101-1106https://doi.org/10.31399/asm.cp.itsc2006p1101

View Articletitled, Advanced Particle Characterization for Improved Understanding of Spray Coating Quality

Vanadium-Rich Iron-Based Thermal Spray Coatings for Combined Wear and Corrosion Protection

B. Wielage; H. Pokhmurska; T. Grund; S. Ahrens; A. Wank; G. Reisel; T.M. Schnick; E. Deppe

ITSC 2006; 1107-1112https://doi.org/10.31399/asm.cp.itsc2006p1107

View Articletitled, Vanadium-Rich Iron-Based Thermal Spray Coatings for Combined Wear and Corrosion Protection

Design and Characterization of a Simulated Environment Erosion Test Bed

D. Kosikowski; J. Stanisic; T. Ostrom; P.S. Mohanty

ITSC 2006; 1113-1118https://doi.org/10.31399/asm.cp.itsc2006p1113

View Articletitled, Design and Characterization of a Simulated Environment Erosion Test Bed

MoB/CoCr Spray Coating with Higher Durability in Molten Al and Al-Zn Alloys

H. Mizuno; I. Aoki; S. Tawada; J. Kitamura

ITSC 2006; 1119-1124https://doi.org/10.31399/asm.cp.itsc2006p1119

View Articletitled, MoB/CoCr Spray Coating with Higher Durability in Molten Al and Al-Zn Alloys

TBC Characterization Using Capacitive and Inductive Sensors with Multivariate Inversion Methods

Y. Sheiretov; V. Zilberstein; D. Schlicker; N. Goldfine; R. Sikorski

ITSC 2006; 1125-1132https://doi.org/10.31399/asm.cp.itsc2006p1125

View Articletitled, TBC Characterization Using Capacitive and Inductive Sensors with Multivariate Inversion Methods

Inelastic Deformation of Metallic Coatings: Measurement and Analysis

W. Choi; S. Sampath; A. Gouldstone

ITSC 2006; 1133-1136https://doi.org/10.31399/asm.cp.itsc2006p1133

View Articletitled, Inelastic Deformation of Metallic Coatings: Measurement and Analysis

Evaluation of Thermal Stresses in Thermo-abrasive Blasting Nozzles

I.A. Gorlach

ITSC 2006; 1137-1142https://doi.org/10.31399/asm.cp.itsc2006p1137

View Articletitled, Evaluation of Thermal Stresses in Thermo-abrasive Blasting Nozzles

Formation of Pores in Thermal Spray Coatings due to Incomplete Filling of Voids under Solid Particles

M. Xue; J. Mostaghimi; S. Chandra

ITSC 2006; 1143-1148https://doi.org/10.31399/asm.cp.itsc2006p1143

View Articletitled, Formation of Pores in Thermal Spray Coatings due to Incomplete Filling of Voids under Solid Particles

Nanomechanical Properties of Zirconia- Alumina Plasma Sprayed Nanocomposite Coatings

W.M. Zhao; J. Wang; C.S. Zhai; B.D. Sun

ITSC 2006; 1149-1154https://doi.org/10.31399/asm.cp.itsc2006p1149

View Articletitled, Nanomechanical Properties of Zirconia- Alumina Plasma Sprayed Nanocomposite Coatings

Ambient and High Temperature Thermal Conductivity of Thermal Sprayed Coatings

W. Chi; S. Sampath; H. Wang

ITSC 2006; 1155-1160https://doi.org/10.31399/asm.cp.itsc2006p1155

View Articletitled, Ambient and High Temperature Thermal Conductivity of Thermal Sprayed Coatings

Evaluation of Fatigue Properties of Various Thermal Spray Coatings

J. Siegl; J. Adámek; O. Kovářík; J. Dubský; P. Chráska

ITSC 2006; 1161-1166https://doi.org/10.31399/asm.cp.itsc2006p1161

View Articletitled, Evaluation of Fatigue Properties of Various Thermal Spray Coatings

Plasma Transferred Arc and Laser Surfacing

PTA Welding – Modeling and Experimental Optimization

J. Wilden; J.P. Bergmann; H. Frank

ITSC 2006; 1167-1172https://doi.org/10.31399/asm.cp.itsc2006p1167

View Articletitled, PTA Welding – Modeling and Experimental Optimization

PTA Hardfacing Material for Earthmoving Equipment Applications

X. Jiang; M.B. Beardsley

ITSC 2006; 1173-1176https://doi.org/10.31399/asm.cp.itsc2006p1173

View Articletitled, PTA Hardfacing Material for Earthmoving Equipment Applications

Plasma Transferred Arc Deposition of Beryllium

K. Hollis; B. Bartram; J. Withers; R. Storm; J. Massarello

ITSC 2006; 1177-1182https://doi.org/10.31399/asm.cp.itsc2006p1177

View Articletitled, Plasma Transferred Arc Deposition of Beryllium

Laser and PTA Surfacing with TiC-based Materials

A. Techel; L.-M. Berger; J. Bretschneider; S. Thiele

ITSC 2006; 1183-1188https://doi.org/10.31399/asm.cp.itsc2006p1183

View Articletitled, Laser and PTA Surfacing with TiC-based Materials

Deposition of Thick Wear and Corrosion Resistant Coatings by High Power Diode Laser

J. Tuominen; J. Latokartano; J. Vihinen; P. Vuoristo; T. Mäntylä; T. Naumann; S. Scharek; L-M. Berger; S. Nowotny

ITSC 2006; 1189-1192https://doi.org/10.31399/asm.cp.itsc2006p1189

View Articletitled, Deposition of Thick Wear and Corrosion Resistant Coatings by High Power Diode Laser

Optimisation of Laser Cladding Process Using Taguchi and EM Methods for MMC Coating Production

L. Dubourg; L. St-Georges

ITSC 2006; 1193-1198https://doi.org/10.31399/asm.cp.itsc2006p1193

View Articletitled, Optimisation of Laser Cladding Process Using Taguchi and EM Methods for MMC Coating Production

Laser Cladding of M2 Steel on a Steel Substrate

D.T. Levcovici; R. Boiciuc; S.M. Levcovici; C. Gheorghieş

ITSC 2006; 1199-1204https://doi.org/10.31399/asm.cp.itsc2006p1199

View Articletitled, Laser Cladding of M2 Steel on a Steel Substrate

Laser Cladding of Ni-Cr-B-Fe-Al Alloy on a Steel Support

S.M. Levcovici; C. Gheorghies; S. Boiciuc; D.T. Levcovici

ITSC 2006; 1205-1210https://doi.org/10.31399/asm.cp.itsc2006p1205

View Articletitled, Laser Cladding of Ni-Cr-B-Fe-Al Alloy on a Steel Support

Spray Forming and Rapid Prototyping

Scientific, Technological and Economic Aspects of Rapid Tooling by Electric Arc Spray Forming

P.S. Grant; S.R. Duncan; A. Roche; C.F. Johnson

ITSC 2006; 1211-1216https://doi.org/10.31399/asm.cp.itsc2006p1211

View Articletitled, Scientific, Technological and Economic Aspects of Rapid Tooling by Electric Arc Spray Forming

Nozzle Modification for Property Improvement of Arc Spray-formed Steel Tools

J.-H. Kim; B.-G. Seong; J.-H. Ahn; K.-H. Baik

ITSC 2006; 1217-1222https://doi.org/10.31399/asm.cp.itsc2006p1217

View Articletitled, Nozzle Modification for Property Improvement of Arc Spray-formed Steel Tools

Functional Prototyping of PEM Fuel Cell Bi-Polar Plates by Hybrid Thermal Spray Deposition and 3D Printing Process

B. Lyons; P. Mohanty; S. Das

ITSC 2006; 1223-1230https://doi.org/10.31399/asm.cp.itsc2006p1223

View Articletitled, Functional Prototyping of PEM Fuel Cell Bi-Polar Plates by Hybrid Thermal Spray Deposition and 3D Printing Process

Functionally Graded Net-shape Component Fabrication by Hybrid Spray Process

D. Kosikowski; T. Ostrom; P.S. Mohanty

ITSC 2006; 1231-1236https://doi.org/10.31399/asm.cp.itsc2006p1231

View Articletitled, Functionally Graded Net-shape Component Fabrication by Hybrid Spray Process

Plasma Spray Formed Yttrium Oxide Crucibles

K. Hollis; B. Bartram

ITSC 2006; 1237-1242https://doi.org/10.31399/asm.cp.itsc2006p1237

View Articletitled, Plasma Spray Formed Yttrium Oxide Crucibles

Aspects of Thermal Spray Molding of Micro Components

J. Wilden; J.P. Bergmann; T. Luhn

ITSC 2006; 1243-1246https://doi.org/10.31399/asm.cp.itsc2006p1243

View Articletitled, Aspects of Thermal Spray Molding of Micro Components

Surface and Coating Treatments

Improved Surface Preparation of Nickel-Superalloys for MCrAlY Coatings on Gas Turbine

A. Scrivani; G. Rizzi; C. Giolli

ITSC 2006; 1247-1252https://doi.org/10.31399/asm.cp.itsc2006p1247

View Articletitled, Improved Surface Preparation of Nickel-Superalloys for MCrAlY Coatings on Gas Turbine

Ni-Cr Coatings Deposited on a Magnesium Alloy Substrate Using the PROTAL Process

H. Li; S. Costil; S-H. Deng; C. Coddet; H-L. Liao; K. Richardt; E. Lugscheider; K. Bobzin

ITSC 2006; 1253-1258https://doi.org/10.31399/asm.cp.itsc2006p1253

View Articletitled, Ni-Cr Coatings Deposited on a Magnesium Alloy Substrate Using the PROTAL Process

Heat Treatment Effects on the Tribological Performance of HVOF-Sprayed Co-Mo-Cr-Si Coatings

G. Bolelli; L. Lusvarghi

ITSC 2006; 1259-1264https://doi.org/10.31399/asm.cp.itsc2006p1259

View Articletitled, Heat Treatment Effects on the Tribological Performance of HVOF-Sprayed Co-Mo-Cr-Si Coatings

Benefit of Surface Oxide Removal on Thermal Spray Coating Adhesion Using the PROTAL Process

H. Li; S. Costil; S-H. Deng; H-L. Liao; C. Coddet; V. Ji; W-J. Huang

ITSC 2006; 1265-1270https://doi.org/10.31399/asm.cp.itsc2006p1265

View Articletitled, Benefit of Surface Oxide Removal on Thermal Spray Coating Adhesion Using the PROTAL Process

Effects of Blasting Parameters on Removability of Residual Grit

T. Maruyama; K. Akagi; T. Kobayashi

ITSC 2006; 1271-1276https://doi.org/10.31399/asm.cp.itsc2006p1271

View Articletitled, Effects of Blasting Parameters on Removability of Residual Grit

Influence of Substrate Surface Roughness on Adhesive Strength

H. Yang; H.G. Wang; X.P. Cao; L. Wang

ITSC 2006; 1277-1282https://doi.org/10.31399/asm.cp.itsc2006p1277

View Articletitled, Influence of Substrate Surface Roughness on Adhesive Strength

Laser Post-Treatment of Plasma Sprayed Al₂O₃-Cr₂O₃ Coatings

J. Dubský; B. Kolman; P. Chráska; A. Jančárek

ITSC 2006; 1283-1288https://doi.org/10.31399/asm.cp.itsc2006p1283

View Articletitled, Laser Post-Treatment of Plasma Sprayed Al<sub>2</sub>O<sub>3</sub>-Cr<sub>2</sub>O<sub>3</sub> Coatings

Thermal Spray and Other Surface Engineering Technologies

On the Surface Engineering Technologies Available to Today's Engineer

R.C. Tucker, Jr.; J. Treglio

ITSC 2006; 1289-1294https://doi.org/10.31399/asm.cp.itsc2006p1289

View Articletitled, On the Surface Engineering Technologies Available to Today's Engineer

Choosing the Right Coating Technology for the Application

K. Legg

ITSC 2006; 1295-1300https://doi.org/10.31399/asm.cp.itsc2006p1295

View Articletitled, Choosing the Right Coating Technology for the Application

Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD—A Technical and Economic Comparison

A. Feuerstein; J. Knapp; T. Taylor; A. Ashary; A. Bolcavage; N. Hitchman

ITSC 2006; 1301-1316https://doi.org/10.31399/asm.cp.itsc2006p1301

View Articletitled, Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD—A Technical and Economic Comparison

Micro and Nanomanufacturing Technologies – A Case for Using Thermal and Cold Spray Techniques

M.J. Jackson; W. Ahmed

ITSC 2006; 1317-1322https://doi.org/10.31399/asm.cp.itsc2006p1317

View Articletitled, Micro and Nanomanufacturing Technologies – A Case for Using Thermal and Cold Spray Techniques

Hypersonic Plasma Particle Deposition – A Hybrid between Plasma Spraying and Vapor Deposition

J. Hafiz; R. Mukherjee; X. Wang; P.H. McMurry; J. V. R. Heberlein; S.L. Girshick

ITSC 2006; 1323-1328https://doi.org/10.31399/asm.cp.itsc2006p1323

View Articletitled, Hypersonic Plasma Particle Deposition – A Hybrid between Plasma Spraying and Vapor Deposition

Hybrid Plasma Spray – PVD Coatings in Triple Torch Plasma Reactor

J. Heberlein; D. Kolman; H. Chen'

ITSC 2006; 1329-1332https://doi.org/10.31399/asm.cp.itsc2006p1329

View Articletitled, Hybrid Plasma Spray – PVD Coatings in Triple Torch Plasma Reactor

Development of Composite Nano-Coatings by Comprehensive Thermal Plasma Deposition

H.J. Huang; J.Q. Li; T. Ma; K. Eguchi; T. Yoshida

ITSC 2006; 1333-1338https://doi.org/10.31399/asm.cp.itsc2006p1333

View Articletitled, Development of Composite Nano-Coatings by Comprehensive Thermal Plasma Deposition

Environmentally Safe Alternative Chrome Application Technology for the Automotive Industry

M. Sunthankar

ITSC 2006; 1339-1344https://doi.org/10.31399/asm.cp.itsc2006p1339

View Articletitled, Environmentally Safe Alternative Chrome Application Technology for the Automotive Industry

Wear Protection

Thermal Sprayed Coatings in High-Performance Agricultural Machinery: Properties and Wear-Behaviour Test Routine

M. Lugbauer; A. Kroll; E. Badisch; R. Polak; F. Franek

ITSC 2006; 1345-1350https://doi.org/10.31399/asm.cp.itsc2006p1345

View Articletitled, Thermal Sprayed Coatings in High-Performance Agricultural Machinery: Properties and Wear-Behaviour Test Routine

Fretting Wear Behavior of Plasma Sprayed Cu-Ni-In Coating and Cu-Ni-In+MoS₂ Composite Coatings

S.N. Paul; N.S. More; J.K.N. Murthy; M. Roy; B. Venkataraman

ITSC 2006; 1351-1356https://doi.org/10.31399/asm.cp.itsc2006p1351

View Articletitled, Fretting Wear Behavior of Plasma Sprayed Cu-Ni-In Coating and Cu-Ni-In+MoS<sub>2</sub> Composite Coatings

Novel Nickel-Cermet Hardcoatings

A. Sherman; W. Garrett; M. Conklin

ITSC 2006; 1357-1362https://doi.org/10.31399/asm.cp.itsc2006p1357

View Articletitled, Novel Nickel-Cermet Hardcoatings

Frictional Properties of M₃B₂ Boride Cermet Coating

K. Hamashima; N. Tomita

ITSC 2006; 1363-1368https://doi.org/10.31399/asm.cp.itsc2006p1363

View Articletitled, Frictional Properties of M<sub>3</sub>B<sub>2</sub> Boride Cermet Coating

Wear Behaviour of APS and HVOF Sprayed Ceramic Coatings

G. Bolelli; V. Cannillo; L. Lusvarghi; E. Turunen; T. Varis; T. Fält; S.-P. Hannula

ITSC 2006; 1369-1374https://doi.org/10.31399/asm.cp.itsc2006p1369

View Articletitled, Wear Behaviour of APS and HVOF Sprayed Ceramic Coatings

Development of Self-Lubricating Coatings for Ti-6Al-4V Dovetails using a High- Velocity-Particle-Consolidation (HVPC) Process

G. Aggarwal; P. Walia; A.E. Segall; I. Smid; T. Eden

ITSC 2006; 1375-1380https://doi.org/10.31399/asm.cp.itsc2006p1375

View Articletitled, Development of Self-Lubricating Coatings for Ti-6Al-4V Dovetails using a High- Velocity-Particle-Consolidation (HVPC) Process

Properties of WC-10Co-4Cr Powders and Coatings Made of Recycled Hard Metal

U. Kanerva; K. Kosme; J. Lagerbom; P. Vuoristo; T. Karhumaa

ITSC 2006; 1381-1386https://doi.org/10.31399/asm.cp.itsc2006p1381

View Articletitled, Properties of WC-10Co-4Cr Powders and Coatings Made of Recycled Hard Metal

Thermal Spray Coatings from WC-Co Powders Produced by Mechanically Activated Synthesis

S. Zimakov; P. Peetsalu; J. Pirso; P. Kulu; V. Mikli

ITSC 2006; 1387-1392https://doi.org/10.31399/asm.cp.itsc2006p1387

View Articletitled, Thermal Spray Coatings from WC-Co Powders Produced by Mechanically Activated Synthesis

Wear Resistance of Cermet Coating Stainless Steel/ Chromium Oxide Plasma Sprayed

Z. Medarhri; H. Ageorges; S. Touimi; P. Fauchais; P. Ctibor

ITSC 2006; 1393-1398https://doi.org/10.31399/asm.cp.itsc2006p1393

View Articletitled, Wear Resistance of Cermet Coating Stainless Steel/ Chromium Oxide Plasma Sprayed

Life Cycle Assessment (LCA) of Thermal-Sprayed and Chromium Electroplated Coatings

G. Montavon; A. Vardelle; N. Krishnan; P. Ulloa; S. Costil; H. Liao

ITSC 2006; 1399-1406https://doi.org/10.31399/asm.cp.itsc2006p1399

View Articletitled, Life Cycle Assessment (LCA) of Thermal-Sprayed and Chromium Electroplated Coatings

Correlation between Process Maps of HVOF-Sprayed WC-Co Coatings and Wear Resistance

A. Valarezo; W.B. Choi; A. Gouldstone; S. Sampath

ITSC 2006; 1407-1412https://doi.org/10.31399/asm.cp.itsc2006p1407

View Articletitled, Correlation between Process Maps of HVOF-Sprayed WC-Co Coatings and Wear Resistance

Equipment and Processes

Cladding with New Short Arc Devices

J. Wilden; J.P. Bergmann; M. Dyshlovenko; Dolles; R. Muether; S.F. Goecke

ITSC 2006; 1413-1418https://doi.org/10.31399/asm.cp.itsc2006p1413

View Articletitled, Cladding with New Short Arc Devices

Effect of Torch Hardware on Oxy-Acetylene Powder Flame Spray Performance

D.A. Urrea; J.W. Cates; A.C. Hall; R.A. Neiser; M.F. Smith; D.A. Hirschfeld; A.J. Mayer; D.E. Beatty; T.J. Roemer

ITSC 2006; 1419-1424https://doi.org/10.31399/asm.cp.itsc2006p1419

View Articletitled, Effect of Torch Hardware on Oxy-Acetylene Powder Flame Spray Performance

Zinc Oxide Film Deposition by Atmospheric TPCVD

Y. Ando; S. Tobe; H. Tahara

ITSC 2006; 1425-1430https://doi.org/10.31399/asm.cp.itsc2006p1425

View Articletitled, Zinc Oxide Film Deposition by Atmospheric TPCVD

Nozzle Developments for Thermal Spraying at Very Low Pressure

R. Bolot; D. Sokolov; D. Klein; C. Coddet

ITSC 2006; 1431-1436https://doi.org/10.31399/asm.cp.itsc2006p1431

View Articletitled, Nozzle Developments for Thermal Spraying at Very Low Pressure

New Functions of Thermal Spray Toolkit—A Software Developed for Offline and Rapid Robot Programming

S. Deng; H. Li; H. Liao; C. Coddet; C. Zeng; P. Charles; P. Uriot

ITSC 2006; 1437-1442https://doi.org/10.31399/asm.cp.itsc2006p1437

View Articletitled, New Functions of Thermal Spray Toolkit—A Software Developed for Offline and Rapid Robot Programming

The Basic Principles of DYMET Technology

A. Shkodkin; A. Kashirin; O. Klyuev; T. Buzdygar

ITSC 2006; 1443-1446https://doi.org/10.31399/asm.cp.itsc2006p1443

View Articletitled, The Basic Principles of DYMET Technology

Latest Technology for Commercially Available Cold Spray Systems

P. Richter; H. Hoell

ITSC 2006; 1447-1450https://doi.org/10.31399/asm.cp.itsc2006p1447

View Articletitled, Latest Technology for Commercially Available Cold Spray Systems

Unique Thermal Spray Cabinet with High Enthalpy Plasma

M. van Wonderen

ITSC 2006; 1451-1456https://doi.org/10.31399/asm.cp.itsc2006p1451

View Articletitled, Unique Thermal Spray Cabinet with High Enthalpy Plasma

Health, Safety, Standards, and Training

The Way to CE Conformity for Equipment in Thermal Spray

H. Wernli; F. Kammermann; R. Moll; W. Windler

ITSC 2006; 1457-1462https://doi.org/10.31399/asm.cp.itsc2006p1457

View Articletitled, The Way to CE Conformity for Equipment in Thermal Spray

Metallic Fume Emission and Operator Exposure During WC-10%Co-4%Cr Spraying by HVOF

J.-G. Legoux; J. Oberste Berghaus; C. Moreau

ITSC 2006; 1463-1466https://doi.org/10.31399/asm.cp.itsc2006p1463

View Articletitled, Metallic Fume Emission and Operator Exposure During WC-10%Co-4%Cr Spraying by HVOF

What Do You Need for a Good Training Program?

D. Puerta; J.P. Sauer

ITSC 2006; 1467-1470https://doi.org/10.31399/asm.cp.itsc2006p1467

View Articletitled, What Do You Need for a Good Training Program?

Influence of Industrial Gases on the Thermal Spray Process

W. Kroemmer; P. Heinrich

ITSC 2006; 1471-1474https://doi.org/10.31399/asm.cp.itsc2006p1471

View Articletitled, Influence of Industrial Gases on the Thermal Spray Process

GTS Certificate—A Successful Means of Benefiting Its Members

D. Böhme; R. Huber; D. Grasme; P. Heinrich

ITSC 2006; 1475-1480https://doi.org/10.31399/asm.cp.itsc2006p1475

View Articletitled, GTS Certificate—A Successful Means of Benefiting Its Members

Volume Information

Preface

ITSC 2006; iii-vhttps://doi.org/10.31399/asm.cp.itsc2006fm01

View Articletitled, Preface

Organizing Committees

ITSC 2006; vihttps://doi.org/10.31399/asm.cp.itsc2006fm02

View Articletitled, Organizing Committees

Thermal Spray Hall of Fame

ITSC 2006; viihttps://doi.org/10.31399/asm.cp.itsc2006fm03

View Articletitled, Thermal Spray Hall of Fame