Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Thermal Spray 2003: Proceedings from the International Thermal Spray Conference

Cold Spray

Numerical and Microstructural Investigations of the Bonding Mechanisms in Cold Spraying

F. Gärtner; C. Borchers; T. Stoltenhoff; H. Kreye; H. Assadi

ITSC 2003; 1-8https://doi.org/10.31399/asm.cp.itsc2003p0001

View Articletitled, Numerical and Microstructural Investigations of the Bonding Mechanisms in Cold Spraying

High Strain Rate Deformation Phenomena in Explosive Powder Compaction and Cold Gas Spraying

T. Schmidt; F. Gärtner; H. Kreye

ITSC 2003; 9-18https://doi.org/10.31399/asm.cp.itsc2003p0009

View Articletitled, High Strain Rate Deformation Phenomena in Explosive Powder Compaction and Cold Gas Spraying

Optimizing the Cold Spray Process

R.C. Dykhuizen; R.A. Neiser

ITSC 2003; 19-26https://doi.org/10.31399/asm.cp.itsc2003p0019

View Articletitled, Optimizing the Cold Spray Process

Modeling of Particle-Substrate Adhesive Interaction Under the Cold Spray Process

A.N. Papyrin; S.V. Klinkov; V.F. Kosarev

ITSC 2003; 27-35https://doi.org/10.31399/asm.cp.itsc2003p0027

View Articletitled, Modeling of Particle-Substrate Adhesive Interaction Under the Cold Spray Process

A Systematic Approach to Material Eligibility for the Cold Spray Process

J. Vlcek; L. Gimeno; H. Huber; E. Lugscheider

ITSC 2003; 37-44https://doi.org/10.31399/asm.cp.itsc2003p0037

View Articletitled, A Systematic Approach to Material Eligibility for the Cold Spray Process

Particle-Substrate Interactions in Cold Gas Dynamic Spraying

D. Zhang; P.H. Shipway; D.G. McCartney

ITSC 2003; 45-52https://doi.org/10.31399/asm.cp.itsc2003p0045

View Articletitled, Particle-Substrate Interactions in Cold Gas Dynamic Spraying

Evaluation of Coatings Produced Via Kinetic and Cold Spray Processes

T. Van Steenkiste; J.R. Smith

ITSC 2003; 53-61https://doi.org/10.31399/asm.cp.itsc2003p0053

View Articletitled, Evaluation of Coatings Produced Via Kinetic and Cold Spray Processes

Potential Applications of Cold-Spray Technology in Automotive Manufacturing

R.C. McCune

ITSC 2003; 63-70https://doi.org/10.31399/asm.cp.itsc2003p0063

View Articletitled, Potential Applications of Cold-Spray Technology in Automotive Manufacturing

Development of Cold Gas Sprayed Coatings

J. Voyer; T. Stoltenhoff; H. Kreye

ITSC 2003; 71-78https://doi.org/10.31399/asm.cp.itsc2003p0071

View Articletitled, Development of Cold Gas Sprayed Coatings

Cold Spray Copper Application for Upper Stage Rocket Engine Design

J. Haynes; J. Karthikeyan

ITSC 2003; 79-83https://doi.org/10.31399/asm.cp.itsc2003p0079

View Articletitled, Cold Spray Copper Application for Upper Stage Rocket Engine Design

Kinetic Spray of Aluminum Metal Matrix Composites For Thermal Management Applications

Donald T. Morelli; Alaa A. Elmoursi; Thomas H. VanSteenkiste; Daniel W. Gorkiewicz; Bryan Gillispie

ITSC 2003; 85-90https://doi.org/10.31399/asm.cp.itsc2003p0085

View Articletitled, Kinetic Spray of Aluminum Metal Matrix Composites For Thermal Management Applications

Effect of Spray Angle on Deposition Characteristics in Cold Spraying

C.-J. Li; W.-Y. Li; Y.-Y. Wang; H. Fukanuma

ITSC 2003; 91-96https://doi.org/10.31399/asm.cp.itsc2003p0091

View Articletitled, Effect of Spray Angle on Deposition Characteristics in Cold Spraying

Cold Spraying – Equipment and Application Trends

W. Kroemmer; P. Heinrich; P. Richter

ITSC 2003; 97-102https://doi.org/10.31399/asm.cp.itsc2003p0097

View Articletitled, Cold Spraying – Equipment and Application Trends

Automated Cold Spray System: Description of Equipment and Performance Data

R.E. Blose; T.J. Roemer; A.J. Mayer; D.E. Beatty; A.N. Papyrin

ITSC 2003; 103-111https://doi.org/10.31399/asm.cp.itsc2003p0103

View Articletitled, Automated Cold Spray System: Description of Equipment and Performance Data

Helium Recovery: Design Considerations for Cold Spray Systems

Frank Lauricella; Scot Jaynes

ITSC 2003; 113-116https://doi.org/10.31399/asm.cp.itsc2003p0113

View Articletitled, Helium Recovery: Design Considerations for Cold Spray Systems

Cold Spray Technology: An Industrial Perspective

J. Karthikeyan; C.M. Kay

ITSC 2003; 117-121https://doi.org/10.31399/asm.cp.itsc2003p0117

View Articletitled, Cold Spray Technology: An Industrial Perspective

Applications

Production Coating Cost Comparison

P. Meyer; W. Rusch

ITSC 2003; 123-128https://doi.org/10.31399/asm.cp.itsc2003p0123

View Articletitled, Production Coating Cost Comparison

Thermal Spray Solutions For Diesel Engine Piston Rings

C. Herbst-Dederichs

ITSC 2003; 129-138https://doi.org/10.31399/asm.cp.itsc2003p0129

View Articletitled, Thermal Spray Solutions For Diesel Engine Piston Rings

Low-Cost High-Performance Coatings Produced by Internal Plasma Spraying for the Production of High Efficiency Engines

G. Barbezat

ITSC 2003; 139-142https://doi.org/10.31399/asm.cp.itsc2003p0139

View Articletitled, Low-Cost High-Performance Coatings Produced by Internal Plasma Spraying for the Production of High Efficiency Engines

Development of Thermal Spray for Automotive Cylinder Bores

D. Cook; M. Zaluzec; K. Kowalsky

ITSC 2003; 143-147https://doi.org/10.31399/asm.cp.itsc2003p0143

View Articletitled, Development of Thermal Spray for Automotive Cylinder Bores

316L – an Alternative to NiCr Bondcoats for Cr₂O₃-Coatings on Anilox Rolls

R. Winkler; F. Bültmann; S. Hartmann; H. Burkard

ITSC 2003; 149-152https://doi.org/10.31399/asm.cp.itsc2003p0149

View Articletitled, 316L – an Alternative to NiCr Bondcoats for Cr<sub>2</sub>O<sub>3</sub>-Coatings on Anilox Rolls

Plasma-Sprayed Ceramic Coatings for Molten Metal Environments

Kendall J. Hollis; Marla I. Peters; Brian D. Bartram

ITSC 2003; 153-158https://doi.org/10.31399/asm.cp.itsc2003p0153

View Articletitled, Plasma-Sprayed Ceramic Coatings for Molten Metal Environments

Influence of Powder Size in Aluminum Oxide Coatings for Use in the Semiconductor Industry

Robert V. Gansert, Ph.D.

ITSC 2003; 159-161https://doi.org/10.31399/asm.cp.itsc2003p0159

View Articletitled, Influence of Powder Size in Aluminum Oxide Coatings for Use in the Semiconductor Industry

Intermediate Temperature SOFC Based on Fully Integrated Plasma Sprayed Components

X.Q. Ma; S. Hui; H. Zhang; J. Dai; J. Roth; T.D. Xiao; D.E. Reisner

ITSC 2003; 163-168https://doi.org/10.31399/asm.cp.itsc2003p0163

View Articletitled, Intermediate Temperature SOFC Based on Fully Integrated Plasma Sprayed Components

Investigation of the Photocatalytic Efficiencies of Plasma Sprayed TiO₂-Fe₃O₄ Coatings

F.-X. Ye; A. Ohmori; C.-J Li

ITSC 2003; 169-174https://doi.org/10.31399/asm.cp.itsc2003p0169

View Articletitled, Investigation of the Photocatalytic Efficiencies of Plasma Sprayed TiO<sub>2</sub>-Fe<sub>3</sub>O<sub>4</sub> Coatings

Protection of Titanium Alloy Surfaces by Thermal Spraying and Laser Treatment

B. Wielage; H. Podlesak; A. Wank; K.-J. Matthes; G. Kolbe; J. Wilden

ITSC 2003; 175-182https://doi.org/10.31399/asm.cp.itsc2003p0175

View Articletitled, Protection of Titanium Alloy Surfaces by Thermal Spraying and Laser Treatment

Fabrication of TiO₂ Photocatalytic Coatings on PET by Thermal Spraying

T. Kanazawa; A. Ohmori

ITSC 2003; 183-188https://doi.org/10.31399/asm.cp.itsc2003p0183

View Articletitled, Fabrication of TiO<sub>2</sub> Photocatalytic Coatings on PET by Thermal Spraying

Photocatalytic Decomposition of Ammonia by Thermal Sprayed TiO₂ Coatings

A. Ohmori; K. Nakade; Y. Yamamoto

ITSC 2003; 189-193https://doi.org/10.31399/asm.cp.itsc2003p0189

View Articletitled, Photocatalytic Decomposition of Ammonia by Thermal Sprayed TiO<sub>2</sub> Coatings

Optimization of Axial Injection Conditions in a Supersonic Induction Plasma Torch: Application to SOFCs

G. Renouard-Vallet; F. Gitzhofer; M. Boulos; P. Fauchais; M. Vardelle; L. Bianchi

ITSC 2003; 195-202https://doi.org/10.31399/asm.cp.itsc2003p0195

View Articletitled, Optimization of Axial Injection Conditions in a Supersonic Induction Plasma Torch: Application to SOFCs

Methodology for Meeting Standards and Environmental Requirements in Thermal Spraying, Hardfacing and Sand Blasting

Maurice Ducos; Daniel Duchateau

ITSC 2003; 203-209https://doi.org/10.31399/asm.cp.itsc2003p0203

View Articletitled, Methodology for Meeting Standards and Environmental Requirements in Thermal Spraying, Hardfacing and Sand Blasting

Erosion Resistance of Arc Spray Composite Coatings at High Temperature on Boiler Tubes of Pulverized Coal Fired Power Station

Ma Shi-ning; Hu Jun-zhi; Chen Xue-rong; Li Chang-qing; Liu Qian; Jiang Hai

ITSC 2003; 211-215https://doi.org/10.31399/asm.cp.itsc2003p0211

View Articletitled, Erosion Resistance of Arc Spray Composite Coatings at High Temperature on Boiler Tubes of Pulverized Coal Fired Power Station

Corrosion and Wear Protective Coatings

Assessing the Feasibility of using Diamond as a Reinforced Phase in Metal Matrix Composite Coatings

Andrea.F. Richardson; Anne Neville; John I.B. Wilson

ITSC 2003; 217-226https://doi.org/10.31399/asm.cp.itsc2003p0217

View Articletitled, Assessing the Feasibility of using Diamond as a Reinforced Phase in Metal Matrix Composite Coatings

New Carbide Based Materials for HVOF Spraying

S. Zimmermann; H. Keller; G. Schwier

ITSC 2003; 227-232https://doi.org/10.31399/asm.cp.itsc2003p0227

View Articletitled, New Carbide Based Materials for HVOF Spraying

Advanced Oxide Ceramic Coatings for Applications Demanding High Wear Resistance

K. Niemi; S. Rekola; P. Vuoristo; J. Laurila; M. Vippola; T. Mäntylä

ITSC 2003; 233-236https://doi.org/10.31399/asm.cp.itsc2003p0233

View Articletitled, Advanced Oxide Ceramic Coatings for Applications Demanding High Wear Resistance

Development and Application of WC-Cr₃C₂-Ni Coating with High Impact Resistance

T. Itsukaichi; S. Osawa

ITSC 2003; 237-242https://doi.org/10.31399/asm.cp.itsc2003p0237

View Articletitled, Development and Application of WC-Cr<sub>3</sub>C<sub>2</sub>-Ni Coating with High Impact Resistance

Preparation and Characterization of Powders and Coatings Containing Solid Lubricants

U. Männikkö; A. Määttä; P. Vuoristo; T. Mäntylä

ITSC 2003; 243-248https://doi.org/10.31399/asm.cp.itsc2003p0243

View Articletitled, Preparation and Characterization of Powders and Coatings Containing Solid Lubricants

Properties of Plasma and D-Gun Sprayed Metal-Matrix-Composite (MMC) Coatings Based on Ceramic Hard Particle Reinforced Fe-, Ni-aluminide Matrix

Fr.-W. Bach; Z. Babiak; T. Rothardt; B. Formanek

ITSC 2003; 249-253https://doi.org/10.31399/asm.cp.itsc2003p0249

View Articletitled, Properties of Plasma and D-Gun Sprayed Metal-Matrix-Composite (MMC) Coatings Based on Ceramic Hard Particle Reinforced Fe-, Ni-aluminide Matrix

Ceramic Coating of Alloy 625 using Controlled Atmosphere Plasma Spraying for Sea Water Corrosion Protection

V. Guipont; J-P. Fauvarque; S. Beauvais; M. Jeandin; H. Le Guyader; H. Lepresle; A-M. Grolleau

ITSC 2003; 255-261https://doi.org/10.31399/asm.cp.itsc2003p0255

View Articletitled, Ceramic Coating of Alloy 625 using Controlled Atmosphere Plasma Spraying for Sea Water Corrosion Protection

The Influence of Matrix Phase Viscosity on the Plasma-Spray Deposition of Silicon-Nitride Composite Coatings

Y. Bao; D.T. Gawne; T. Zhang

ITSC 2003; 263-268https://doi.org/10.31399/asm.cp.itsc2003p0263

View Articletitled, The Influence of Matrix Phase Viscosity on the Plasma-Spray Deposition of Silicon-Nitride Composite Coatings

Influence of Rare Earth Elements on the Corrosion Resistance of Fe-Cr-Ni Thermal Sprayed Coatings

D.Y. He; J.M. Jiang; Y.Q. Yan; D.J. Xiong

ITSC 2003; 269-271https://doi.org/10.31399/asm.cp.itsc2003p0269

View Articletitled, Influence of Rare Earth Elements on the Corrosion Resistance of Fe-Cr-Ni Thermal Sprayed Coatings

Process Temperature-Hardness-Wear Relationships for HVOF-Sprayed Nanostructured and Conventional Cermet Coatings

B.R. Marple; R.S. Lima

ITSC 2003; 273-282https://doi.org/10.31399/asm.cp.itsc2003p0273

View Articletitled, Process Temperature-Hardness-Wear Relationships for HVOF-Sprayed Nanostructured and Conventional Cermet Coatings

A Parametric Study of an HVOF Process for the Deposition of Nanostructured WC-Co Coatings

C. Bartuli; T. Valente; F. Cipri; E. Bemporad; M. Tului

ITSC 2003; 283-289https://doi.org/10.31399/asm.cp.itsc2003p0283

View Articletitled, A Parametric Study of an HVOF Process for the Deposition of Nanostructured WC-Co Coatings

Abrasion and Sliding Wear of Nanostructured Ceramic Coatings

L. Leblanc

ITSC 2003; 291-299https://doi.org/10.31399/asm.cp.itsc2003p0291

View Articletitled, Abrasion and Sliding Wear of Nanostructured Ceramic Coatings

Fatigue and Fracture Resistance of Nanostructured Composite System: Chrome Carbide – Hard Oxide Aluminum – Aluminum

M. Kireitseu

ITSC 2003; 301-309https://doi.org/10.31399/asm.cp.itsc2003p0301

View Articletitled, Fatigue and Fracture Resistance of Nanostructured Composite System: Chrome Carbide – Hard Oxide Aluminum – Aluminum

Abrasion Wear Behaviour of Plasma and HVOF Sprayed Al₂O₃ SiC Nanocomposite Coatings

P.A. Dearnley; K. Panagopoulos

ITSC 2003; 311-315https://doi.org/10.31399/asm.cp.itsc2003p0311

View Articletitled, Abrasion Wear Behaviour of Plasma and HVOF Sprayed Al<sub>2</sub>O<sub>3</sub> SiC Nanocomposite Coatings

Effect of Powder Composition on the Microstructure and Wear Properties of Sprayed Cast Iron Coatings

M.F. Morks; M.A. Shoeib; Y. Tsunekawa; M. Okumiya

ITSC 2003; 317-322https://doi.org/10.31399/asm.cp.itsc2003p0317

View Articletitled, Effect of Powder Composition on the Microstructure and Wear Properties of Sprayed Cast Iron Coatings

Influence of Thermal Spray Process on the Corrosion Behavior of High-Density 316 Stainless Steel Coatings in Simulated Marine Environment

S. Simard; B. Arsenault

ITSC 2003; 323-327https://doi.org/10.31399/asm.cp.itsc2003p0323

View Articletitled, Influence of Thermal Spray Process on the Corrosion Behavior of High-Density 316 Stainless Steel Coatings in Simulated Marine Environment

A New Spray Coating Process for Manufacture of Stainless Steel Clad Construction Steel with Resistance to Corrosion by De-icing Salts & Seawater

Peter Chesney

ITSC 2003; 329-333https://doi.org/10.31399/asm.cp.itsc2003p0329

View Articletitled, A New Spray Coating Process for Manufacture of Stainless Steel Clad Construction Steel with Resistance to Corrosion by De-icing Salts & Seawater

HVOF Reactive Spraying of Mechanically Alloyed Ni-Ti-C Powders

A.J. Horlock; Z. Sadeghian; D.G. McCartney; P.H. Shipway

ITSC 2003; 335-342https://doi.org/10.31399/asm.cp.itsc2003p0335

View Articletitled, HVOF Reactive Spraying of Mechanically Alloyed Ni-Ti-C Powders

Marine Exposure Tests of Thermal Sprayed Coatings in Japan

S. Kuroda; J. Kawakita; M. Takemoto; Thermal Spray Committee

ITSC 2003; 343-352https://doi.org/10.31399/asm.cp.itsc2003p0343

View Articletitled, Marine Exposure Tests of Thermal Sprayed Coatings in Japan

Development of Dense Corrosion Resistant Coatings By an Improved HVOF Spraying Process

J. Kawakita; S. Kuroda; T. Fukushima; T. Kodama

ITSC 2003; 353-359https://doi.org/10.31399/asm.cp.itsc2003p0353

View Articletitled, Development of Dense Corrosion Resistant Coatings By an Improved HVOF Spraying Process

Protection of Steel Components Against Marine Corrosion by Thermally Sprayed Anodic Coatings

M.F.O. Schiefler; F. Gärtner; J. Voyer; A. Kirsten; H. Kreye; A.J.A. Buschinelli

ITSC 2003; 361-370https://doi.org/10.31399/asm.cp.itsc2003p0361

View Articletitled, Protection of Steel Components Against Marine Corrosion by Thermally Sprayed Anodic Coatings

Development and Implementation of HVOF WC/Co/Cr Coating as Alternative to Electrolytic Hard Chrome Plate in Landing Gear Applications Using Natural Gas as Fuel

D. Lee; R. Eybel; R. Evans

ITSC 2003; 371-376https://doi.org/10.31399/asm.cp.itsc2003p0371

View Articletitled, Development and Implementation of HVOF WC/Co/Cr Coating as Alternative to Electrolytic Hard Chrome Plate in Landing Gear Applications Using Natural Gas as Fuel

Fatigue and Deformations of HVOF Sprayed WC-Co Coatings vs. Hard Chrome Plating

A. Ibrahim; C.C. Berndt

ITSC 2003; 377-380https://doi.org/10.31399/asm.cp.itsc2003p0377

View Articletitled, Fatigue and Deformations of HVOF Sprayed WC-Co Coatings vs. Hard Chrome Plating

Optimization of Heat Transferring Components under Severe Wear Stress Conditions

B. Wielage; A. Wank; G. Reisel; U. Gross; G. Barth

ITSC 2003; 381-388https://doi.org/10.31399/asm.cp.itsc2003p0381

View Articletitled, Optimization of Heat Transferring Components under Severe Wear Stress Conditions

Studies of Cavitation Resistant Thermally Sprayed and Welded Coatings

P.V. Marques; C.R.C. Lima

ITSC 2003; 389-393https://doi.org/10.31399/asm.cp.itsc2003p0389

View Articletitled, Studies of Cavitation Resistant Thermally Sprayed and Welded Coatings

Corrosion of WC-Co-Cr Cermet Coatings using In-Situ Atomic Force Microscopy

V.A.D. Souza; A. Neville

ITSC 2003; 395-403https://doi.org/10.31399/asm.cp.itsc2003p0395

View Articletitled, Corrosion of WC-Co-Cr Cermet Coatings using In-Situ Atomic Force Microscopy

Erosion Behavior of WC-10Co-4Cr HVOF Coatings

J-G Legoux; B. Arsenault; H. Hawthorne; J-P Immarigeon

ITSC 2003; 405-410https://doi.org/10.31399/asm.cp.itsc2003p0405

View Articletitled, Erosion Behavior of WC-10Co-4Cr HVOF Coatings

Surface Changes of Several Thermal Spray Coatings Abraded by a TiO₂ Slurry

A.J. Stavros

ITSC 2003; 411-419https://doi.org/10.31399/asm.cp.itsc2003p0411

View Articletitled, Surface Changes of Several Thermal Spray Coatings Abraded by a TiO<sub>2</sub> Slurry

Erosion and Abrasion Resistance of Boride and Carbide-Based Weld Overlays

F. Lapointe; S. Dallaire

ITSC 2003; 421-426https://doi.org/10.31399/asm.cp.itsc2003p0421

View Articletitled, Erosion and Abrasion Resistance of Boride and Carbide-Based Weld Overlays

Tribological Testing of High Velocity Oxy Fuel (HVOF) Sprayed Composite Cermet Coatings Using Ball on Disk Configuration

P.K. Aw; B.H. Tan

ITSC 2003; 427-433https://doi.org/10.31399/asm.cp.itsc2003p0427

View Articletitled, Tribological Testing of High Velocity Oxy Fuel (HVOF) Sprayed Composite Cermet Coatings Using Ball on Disk Configuration

Relation Between Abrasive Wear and Microstructure of HVOF Cermet Coatings

C.-J. Li; Y.-Y. Wang; G.-C. Ji; A. Ohmori

ITSC 2003; 435-441https://doi.org/10.31399/asm.cp.itsc2003p0435

View Articletitled, Relation Between Abrasive Wear and Microstructure of HVOF Cermet Coatings

Design of HVOF Sprayed Tungsten Carbide Coatings for Best Sliding Wear and Fatigue Life Characteristics

R.V. Isaac; J. Savarimuthu; J.R. Shadley; E.F. Rybicki; W.A. Emery; W. Kalivas

ITSC 2003; 443-447https://doi.org/10.31399/asm.cp.itsc2003p0443

View Articletitled, Design of HVOF Sprayed Tungsten Carbide Coatings for Best Sliding Wear and Fatigue Life Characteristics

Plasma Sprayed Stainless Steel Coatings Doped with Graphite Particles : Study of their Dry Friction Coefficient Against 100C6 Steel Using a Pin on Disk Test

A. Harir; H. Ageorges; A. Grimaud; P. Fauchais; F. Platon

ITSC 2003; 449-454https://doi.org/10.31399/asm.cp.itsc2003p0449

View Articletitled, Plasma Sprayed Stainless Steel Coatings Doped with Graphite Particles : Study of their Dry Friction Coefficient Against 100C6 Steel Using a Pin on Disk Test

Plasma Sprayed Nanostructured Zirconia Coatings for Wear Resistance

Chuanxian Ding; Huang Chen; Xuanyong Liu; Yi Zeng

ITSC 2003; 455-458https://doi.org/10.31399/asm.cp.itsc2003p0455

View Articletitled, Plasma Sprayed Nanostructured Zirconia Coatings for Wear Resistance

Sliding Wear Evaluation of Hot Isostatically Pressed (HIPed) Thermal Spray Cermet Coatings

V. Stoica; R. Ahmed; T. Itsukaichi; S. Tobe; M. Escribano

ITSC 2003; 459-466https://doi.org/10.31399/asm.cp.itsc2003p0459

View Articletitled, Sliding Wear Evaluation of Hot Isostatically Pressed (HIPed) Thermal Spray Cermet Coatings

Effect of Post-Treatment on the Corrosion Behaviour of HVOF-Stellite 6 Coatings

U. Malayoglu; A. Neville; D. De Wet

ITSC 2003; 467-473https://doi.org/10.31399/asm.cp.itsc2003p0467

View Articletitled, Effect of Post-Treatment on the Corrosion Behaviour of HVOF-Stellite 6 Coatings

Formation of Intermetallic Phases by Laser Alloying of Thermally Sprayed Ti and Al Coatings for Enhanced Wear Resistance of Lightweight Materials

J. Wilden; H. Frank

ITSC 2003; 475-483https://doi.org/10.31399/asm.cp.itsc2003p0475

View Articletitled, Formation of Intermetallic Phases by Laser Alloying of Thermally Sprayed Ti and Al Coatings for Enhanced Wear Resistance of Lightweight Materials

The Effect of Chlorine on Degradation Mechanisms of Thermal Sprayed Coatings at Elevated Temperatures

M. Uusitalo; P. Vuoristo; T. Mäntylä; L-M Berger; R. Backman

ITSC 2003; 485-494https://doi.org/10.31399/asm.cp.itsc2003p0485

View Articletitled, The Effect of Chlorine on Degradation Mechanisms of Thermal Sprayed Coatings at Elevated Temperatures

Steam Oxidation Resistance of HVOF Thermal Sprayed Ni-Cr Coatings

T. Sundararaian; S. Kuroda; T. Itagaki; F. Abe

ITSC 2003; 495-502https://doi.org/10.31399/asm.cp.itsc2003p0495

View Articletitled, Steam Oxidation Resistance of HVOF Thermal Sprayed Ni-Cr Coatings

Effect of Thermal Sprayed Al on the Steam Oxidation Resistance of 9Cr-1Mo Steel

T. Sundararajan; S. Kuroda; T. Itagaki; F. Abe

ITSC 2003; 503-508https://doi.org/10.31399/asm.cp.itsc2003p0503

View Articletitled, Effect of Thermal Sprayed Al on the Steam Oxidation Resistance of 9Cr-1Mo Steel

The Use of Tungsten Carbide Materials for Oil Sand Wear Applications

M. Anderson; S. Chiovelli; R. Llewellyn

ITSC 2003; 509-518https://doi.org/10.31399/asm.cp.itsc2003p0509

View Articletitled, The Use of Tungsten Carbide Materials for Oil Sand Wear Applications

Evaluation of Modern HVOF Systems Concerning the Application of Hot Corrosion Protective Coatings

Fr.-W. Bach; L. Engl; C. Bach; E. Lugscheider; M. Parco; T. Duda

ITSC 2003; 519-527https://doi.org/10.31399/asm.cp.itsc2003p0519

View Articletitled, Evaluation of Modern HVOF Systems Concerning the Application of Hot Corrosion Protective Coatings

Low Friction Metallic Coatings for Reducing Railroad Squeal

W. Wei; P.A.A. Kootwijk

ITSC 2003; 529-534https://doi.org/10.31399/asm.cp.itsc2003p0529

View Articletitled, Low Friction Metallic Coatings for Reducing Railroad Squeal

Activated Combustion HVAF Coatings for Protection against Wear and High Temperature Corrosion

A. Verstak; V. Baranovski

ITSC 2003; 535-541https://doi.org/10.31399/asm.cp.itsc2003p0535

View Articletitled, Activated Combustion HVAF Coatings for Protection against Wear and High Temperature Corrosion

Microstructure and Wear Performance of Spray & Fused NiCrBSiC/WC Composite Coatings

H.J. Kim; S.Y. Hwang; C.H. Lee

ITSC 2003; 543-548https://doi.org/10.31399/asm.cp.itsc2003p0543

View Articletitled, Microstructure and Wear Performance of Spray & Fused NiCrBSiC/WC Composite Coatings

New Thermal Spray Coating Technology for Corrosion/Erosion Protection

Bill Ferree

ITSC 2003; 549-551https://doi.org/10.31399/asm.cp.itsc2003p0549

View Articletitled, New Thermal Spray Coating Technology for Corrosion/Erosion Protection

Equipment and Processes

Microplasma Spraying of Bioceramic Coatings

Yu. Borisov; S. Vojnarovich; V. Bobric; N. Ulianchich; J. Jansen; J.G. Wolke; Y. Botisov

ITSC 2003; 553-558https://doi.org/10.31399/asm.cp.itsc2003p0553

View Articletitled, Microplasma Spraying of Bioceramic Coatings

Improved Heat Transfer by RF Plasma Produced Structured Surfaces

E. Bouyer; R. Henne; H. Müller-Steinhagen; D. Schäfer; H. Asano

ITSC 2003; 559-566https://doi.org/10.31399/asm.cp.itsc2003p0559

View Articletitled, Improved Heat Transfer by RF Plasma Produced Structured Surfaces

Characterization of Coatings Deposited by Laser-Assisted Atmospheric Plasma Spraying

R. Zieris; S. Nowotny; L.-M. Berger; L. Haubold; E. Beyer

ITSC 2003; 567-572https://doi.org/10.31399/asm.cp.itsc2003p0567

View Articletitled, Characterization of Coatings Deposited by Laser-Assisted Atmospheric Plasma Spraying

Modified Nozzle for the Atmospheric Plasma Spraying

A. Schwenk; G. Nutsch; H. Gruner

ITSC 2003; 573-579https://doi.org/10.31399/asm.cp.itsc2003p0573

View Articletitled, Modified Nozzle for the Atmospheric Plasma Spraying

Characterization of LPPS Processes Under Various Spray Conditions for Potential Applications

A. Refke; G. Barbezat; J.L. Dorier; M. Gindrat; Ch. Hollenstein

ITSC 2003; 581-588https://doi.org/10.31399/asm.cp.itsc2003p0581

View Articletitled, Characterization of LPPS Processes Under Various Spray Conditions for Potential Applications

Low Pressure Wire Arc and Vacuum Plasma Spraying of NiTi Shape Memory Alloys

K. Halter; A. Sickinger; L. Zysset; St. Siegmann

ITSC 2003; 589-595https://doi.org/10.31399/asm.cp.itsc2003p0589

View Articletitled, Low Pressure Wire Arc and Vacuum Plasma Spraying of NiTi Shape Memory Alloys

Effect of Chamber Pressure and Spray Distance on the Plasma Sprayed Alumina Deposition

S. Sodeoka; M. Suzuki; T. Inoue

ITSC 2003; 597-601https://doi.org/10.31399/asm.cp.itsc2003p0597

View Articletitled, Effect of Chamber Pressure and Spray Distance on the Plasma Sprayed Alumina Deposition

On Vacuum Plasma Spray Forming of Ti-6Al-4V

L. Leblanc; P. Tsantrizos; H.R. Salimijazi; T.W. Coyle; J. Mostaghimi

ITSC 2003; 603-609https://doi.org/10.31399/asm.cp.itsc2003p0603

View Articletitled, On Vacuum Plasma Spray Forming of Ti-6Al-4V

Microstructural Formation of Vacuum Plasma Sprayed Ti-6Al-4V Alloy

H.R. Salimijazi; T.W. Coyle; J. Mostaghimi; L. Leblanc; P. Tsantrizos

ITSC 2003; 611-616https://doi.org/10.31399/asm.cp.itsc2003p0611

View Articletitled, Microstructural Formation of Vacuum Plasma Sprayed Ti-6Al-4V Alloy

Effect of Aluminum Phosphate Sealing on the Elastic Properties of Plasma Sprayed Ceramic Coatings

J. Dubský; P. Chráska; S. Ahmaniemi; M. Vippola; P. Vuoristo; T. Mäntylä

ITSC 2003; 617-622https://doi.org/10.31399/asm.cp.itsc2003p0617

View Articletitled, Effect of Aluminum Phosphate Sealing on the Elastic Properties of Plasma Sprayed Ceramic Coatings

Investigation of the Influence of Post-Treatments on the Mechanical Properties of Coated Aluminium Foams

Matthias Maurer; Lidong Zhao; Erich Lugscheider

ITSC 2003; 623-628https://doi.org/10.31399/asm.cp.itsc2003p0623

View Articletitled, Investigation of the Influence of Post-Treatments on the Mechanical Properties of Coated Aluminium Foams

Integrated Machine Tool for Laser Beam Cladding and Freeforming

St. Nowotny; S. Scharek; T. Naumann

ITSC 2003; 629-631https://doi.org/10.31399/asm.cp.itsc2003p0629

View Articletitled, Integrated Machine Tool for Laser Beam Cladding and Freeforming

Determination of the Moving Velocity of Preheating Gun During Preheating/Spraying/Cooling Process by a Function Specification Method

Hanlin Liao; Hao Deng; Christophe Verdy; Christian Coddet

ITSC 2003; 633-640https://doi.org/10.31399/asm.cp.itsc2003p0633

View Articletitled, Determination of the Moving Velocity of Preheating Gun During Preheating/Spraying/Cooling Process by a Function Specification Method

Influence of Carrier Gas Flow and Liquid Injection in the Plasma Jet on Plasma Characteristics During the Atmospheric Plasma Spray Process

J.-E. Döring; R. Vaßen; D. Stöver

ITSC 2003; 641-647https://doi.org/10.31399/asm.cp.itsc2003p0641

View Articletitled, Influence of Carrier Gas Flow and Liquid Injection in the Plasma Jet on Plasma Characteristics During the Atmospheric Plasma Spray Process

Plasma Spraying with Low Power Consumption and High Efficiency

Yang Gao

ITSC 2003; 649-651https://doi.org/10.31399/asm.cp.itsc2003p0649

View Articletitled, Plasma Spraying with Low Power Consumption and High Efficiency

High-Pressure, Non-Pulsing Powder Feeder for Cold Spray and Thermal Spray Processes

Timothy J. Roemer; D.E. Beatty; A.J. Mayer; A.N. Papyrin; R.E. Blose; R.T. Nichols

ITSC 2003; 653-655https://doi.org/10.31399/asm.cp.itsc2003p0653

View Articletitled, High-Pressure, Non-Pulsing Powder Feeder for Cold Spray and Thermal Spray Processes

High Velocity Continuous Combustion A Review of the Technology and Performance History

H.A. Hill

ITSC 2003; 657-659https://doi.org/10.31399/asm.cp.itsc2003p0657

View Articletitled, High Velocity Continuous Combustion A Review of the Technology and Performance History

Feedstocks and Novel Materials

Plasma Spray Elaboration of Finely Structured YSZ Thin Coating by Liquid Suspension Injection

C. Delbos; J. Fazilleau; J.F. Coudert; P. Fauchais; L. Bianchi; K. Wittmann-Ténèze

ITSC 2003; 661-669https://doi.org/10.31399/asm.cp.itsc2003p0661

View Articletitled, Plasma Spray Elaboration of Finely Structured YSZ Thin Coating by Liquid Suspension Injection

Plasma Sprayed Coatings Using Different Nanosize Alumina Powders

Yi Zeng; Chuanxian Ding; Soowohn Lee

ITSC 2003; 671-674https://doi.org/10.31399/asm.cp.itsc2003p0671

View Articletitled, Plasma Sprayed Coatings Using Different Nanosize Alumina Powders

Preparation of TiO₂ Photocatalyst by Thermal Spraying with Liquid Feedstock

G.-J. Yang; C.-J. Li; F. Han; S.-F. Mao

ITSC 2003; 675-680https://doi.org/10.31399/asm.cp.itsc2003p0675

View Articletitled, Preparation of TiO<sub>2</sub> Photocatalyst by Thermal Spraying with Liquid Feedstock

New Composite Coatings on the Base of Recycled Hardmetals

Sergei Zimakov; Riho Tarbe; Priit Kulu

ITSC 2003; 681-685https://doi.org/10.31399/asm.cp.itsc2003p0681

View Articletitled, New Composite Coatings on the Base of Recycled Hardmetals

Plasma Spraying of a Perovskite Suspension for SOFC Cathodes

C. Monterrubio-Badillo; H. Ageorges; T. Chartier; J.F. Coudert; P. Fauchais

ITSC 2003; 687-692https://doi.org/10.31399/asm.cp.itsc2003p0687

View Articletitled, Plasma Spraying of a Perovskite Suspension for SOFC Cathodes

Study on Finishing Wear Resistant Thermally Sprayed Coatings: Influence of Feed Stock Material, Spraying Parameters and Machining Parameters

J. Widen; D. Szczesny; S. Jahn

ITSC 2003; 693-700https://doi.org/10.31399/asm.cp.itsc2003p0693

View Articletitled, Study on Finishing Wear Resistant Thermally Sprayed Coatings: Influence of Feed Stock Material, Spraying Parameters and Machining Parameters

Study on Alumina-based Nano Composite Coating Prepared by Plasma Spray

M. Suzuki; S. Sodeoka; T. Inoue

ITSC 2003; 701-705https://doi.org/10.31399/asm.cp.itsc2003p0701

View Articletitled, Study on Alumina-based Nano Composite Coating Prepared by Plasma Spray

Stainless Steel Coatings Alumina Reinforced by Plasma Spraying Mechanofused Particles

R. Cuenca-Alvarez; H. Ageorges; P. Fauchais

ITSC 2003; 707-712https://doi.org/10.31399/asm.cp.itsc2003p0707

View Articletitled, Stainless Steel Coatings Alumina Reinforced by Plasma Spraying Mechanofused Particles

Peculiarities of Structure of Quasicrystalline Al-Cu-Fe System Coatings Produced By Thermal Spraying Methods

A. Borisova; Y. Borisov; M. Panko; L. Adeeva; M. Kolomytsev; A. Shakhraj; V. Sladkova

ITSC 2003; 713-717https://doi.org/10.31399/asm.cp.itsc2003p0713

View Articletitled, Peculiarities of Structure of Quasicrystalline Al-Cu-Fe System Coatings Produced By Thermal Spraying Methods

Sialon Coating from Sintered Mixtures of Silicon Nitride and Oxides

B.G. Seong; S.Y. Hwang; J.M. Park

ITSC 2003; 719-723https://doi.org/10.31399/asm.cp.itsc2003p0719

View Articletitled, Sialon Coating from Sintered Mixtures of Silicon Nitride and Oxides

Standardization in Quality Control of Thermal Spray Coatings

M. van Wonderen; J.P. Sauer

ITSC 2003; 725-730https://doi.org/10.31399/asm.cp.itsc2003p0725

View Articletitled, Standardization in Quality Control of Thermal Spray Coatings

“RECAST” The Repair of Airfoils When Welding is Unacceptable

J. Burke

ITSC 2003; 731-733https://doi.org/10.31399/asm.cp.itsc2003p0731

View Articletitled, “RECAST” The Repair of Airfoils When Welding is Unacceptable

New Abradable Seals for Industrial Gas Turbines

K. Hajmrle; P. Fiala; A.P. Chilkowich; L. Shiembob

ITSC 2003; 735-740https://doi.org/10.31399/asm.cp.itsc2003p0735

View Articletitled, New Abradable Seals for Industrial Gas Turbines

Oxidation Behavior of Electroplated MCrAlY Coatings

Abdus Khan; Thomas Duda; Alan Taylor; Peter Moore; Peter Rutter; John Foster

ITSC 2003; 741-744https://doi.org/10.31399/asm.cp.itsc2003p0741

View Articletitled, Oxidation Behavior of Electroplated MCrAlY Coatings

On the Stripping of Turbine Blades and Vanes: Mechanisms and Performances of Chemical Stripping for the Removal of NiCrAlY Thermal Spray Coatings

A. Scrivani; M. Soranzo; G. Rizzi; U. Bardi; L. Carafiello

ITSC 2003; 745-748https://doi.org/10.31399/asm.cp.itsc2003p0745

View Articletitled, On the Stripping of Turbine Blades and Vanes: Mechanisms and Performances of Chemical Stripping for the Removal of NiCrAlY Thermal Spray Coatings

HVOF

HVOF Coatings of Ball-Milled Al₂O₃/NiCr Dispersion-Strengthened Powders

E. Lugscheider; J. Zwick; H. Zhang

ITSC 2003; 749-754https://doi.org/10.31399/asm.cp.itsc2003p0749

View Articletitled, HVOF Coatings of Ball-Milled Al<sub>2</sub>O<sub>3</sub>/NiCr Dispersion-Strengthened Powders

Key Factors for Dense Copper Coating by HVOF Spraying

K. Isoyama; J. Kawakita; S. Kuroda; H. Yumoto

ITSC 2003; 755-762https://doi.org/10.31399/asm.cp.itsc2003p0755

View Articletitled, Key Factors for Dense Copper Coating by HVOF Spraying

Evaluation of HVOF Coatings for Wear Applications

C.R.C. Lima; F. Camargo

ITSC 2003; 763-767https://doi.org/10.31399/asm.cp.itsc2003p0763

View Articletitled, Evaluation of HVOF Coatings for Wear Applications

Development of Light Metal Matrix Composite Coatings Using High Velocity Thermal Spray Processes

Fr.-W. Bach; L. Engl; L.A. Josefiak

ITSC 2003; 769-777https://doi.org/10.31399/asm.cp.itsc2003p0769

View Articletitled, Development of Light Metal Matrix Composite Coatings Using High Velocity Thermal Spray Processes

Modelling and Design of an Attachment to the HVOF Gun

A. Dolatabadi; V. Pershin; J. Mostaghimi

ITSC 2003; 779-787https://doi.org/10.31399/asm.cp.itsc2003p0779

View Articletitled, Modelling and Design of an Attachment to the HVOF Gun

High Velocity Oxygen/Air Fuel Spray

Hangong Wang; Bailin Zha; Xunjia Su

ITSC 2003; 789-791https://doi.org/10.31399/asm.cp.itsc2003p0789

View Articletitled, High Velocity Oxygen/Air Fuel Spray

Microstructure and Properties of HVOF-Sprayed TiC-Based Coatings

L.-M. Berger; S. Zimmermann; H. Keller; G. Schwier; R. Scholl; S. Thiele; M. Nebelung; R. Enžl

ITSC 2003; 793-799https://doi.org/10.31399/asm.cp.itsc2003p0793

View Articletitled, Microstructure and Properties of HVOF-Sprayed TiC-Based Coatings

Acoustic Emission as a Tool for Characterising HVOF-Sprayed WC-Co Coatings

L.C. Driver; P.H. Shipway; D.G. McCartney; L.A. Donohue; D.S. Rickerby

ITSC 2003; 801-807https://doi.org/10.31399/asm.cp.itsc2003p0801

View Articletitled, Acoustic Emission as a Tool for Characterising HVOF-Sprayed WC-Co Coatings

HVOF Coating Characterization by Acoustic Emission Using Four-Point Bending Test

S. Bouaricha; J.-G. Legoux; P. Marcoux

ITSC 2003; 809-817https://doi.org/10.31399/asm.cp.itsc2003p0809

View Articletitled, HVOF Coating Characterization by Acoustic Emission Using Four-Point Bending Test

Influence of Powder Size and Strength on HVOF Spraying – Mapping the Onset of Spitting

T. Itsukaichi; S. Osawa; R. Ahmed

ITSC 2003; 819-824https://doi.org/10.31399/asm.cp.itsc2003p0819

View Articletitled, Influence of Powder Size and Strength on HVOF Spraying – Mapping the Onset of Spitting

Development of HVOF Sprayed Aluminium Alloy Engine Bearings

A.J. Sturgeon; C. Reignier; I. Laing; C. Perrin

ITSC 2003; 825-828https://doi.org/10.31399/asm.cp.itsc2003p0825

View Articletitled, Development of HVOF Sprayed Aluminium Alloy Engine Bearings

Mechanical Properties and Microstructure of HVOF Sprayed Co and Ni Alloy Coatings

D. Zhang; S.J. Harris; D.G. McCartney

ITSC 2003; 829-836https://doi.org/10.31399/asm.cp.itsc2003p0829

View Articletitled, Mechanical Properties and Microstructure of HVOF Sprayed Co and Ni Alloy Coatings

Structure and Property of WC-17Co Coatings Sprayed by HVO/AF

Bailin Zha; Hangong Wang; Xunjia Su

ITSC 2003; 837-839https://doi.org/10.31399/asm.cp.itsc2003p0837

View Articletitled, Structure and Property of WC-17Co Coatings Sprayed by HVO/AF

Property Evaluation of HVOF-Sprayed Magnetic Thick Films

X. Ma; S. Ge; T. Zhang; Y. Zhang

ITSC 2003; 841-845https://doi.org/10.31399/asm.cp.itsc2003p0841

View Articletitled, Property Evaluation of HVOF-Sprayed Magnetic Thick Films

Science and Applications of Thermal Spray

Coating Formation by Impact of Molten Metal Droplets with Uniform Size and Velocity

Rajeev Dhiman; Sanjeev Chandra

ITSC 2003; 847-855https://doi.org/10.31399/asm.cp.itsc2003p0847

View Articletitled, Coating Formation by Impact of Molten Metal Droplets with Uniform Size and Velocity

Splat Profile of Impinging Droplets on Rough Substrates

S. Amada; I. Imakawa; S. Aoki

ITSC 2003; 857-861https://doi.org/10.31399/asm.cp.itsc2003p0857

View Articletitled, Splat Profile of Impinging Droplets on Rough Substrates

Experimental Correlation between Flattening Degree and Reynolds Number of Spray Particles

C.-J. Li; H.-L. Liao; P. Gougeon; G. Montavon; C. Coddet

ITSC 2003; 863-869https://doi.org/10.31399/asm.cp.itsc2003p0863

View Articletitled, Experimental Correlation between Flattening Degree and Reynolds Number of Spray Particles

Evaluation of Sn and Al₂O₃ Splats by Fractal Geometry

R. Hikari; S. Amada; S. Uematsu

ITSC 2003; 871-874https://doi.org/10.31399/asm.cp.itsc2003p0871

View Articletitled, Evaluation of Sn and Al<sub>2</sub>O<sub>3</sub> Splats by Fractal Geometry

Effect of Reynolds Number of Molten Spray Particles on Splat Formation in Plasma Spraying

C.-J. Li; H.-L. Liao; P. Gougeon; G. Montavon; C. Coddet

ITSC 2003; 875-882https://doi.org/10.31399/asm.cp.itsc2003p0875

View Articletitled, Effect of Reynolds Number of Molten Spray Particles on Splat Formation in Plasma Spraying

Influence of Surface Laser Cleaning Combined with Substrate Preheating on the Splat Morphology

H. Liao; A. Gammoudi; S. Costil; C. Coddet

ITSC 2003; 883-888https://doi.org/10.31399/asm.cp.itsc2003p0883

View Articletitled, Influence of Surface Laser Cleaning Combined with Substrate Preheating on the Splat Morphology

Influence of Substrate Temperature on Formation of Micrometric Splats Obtained by Plasma Spraying Liquid Suspension

J. Fazilleau; C. Delbos; M. Violier; J-F. Coudert; P. Fauchais; L. Bianchi; K. Wittmann-Ténèze

ITSC 2003; 889-893https://doi.org/10.31399/asm.cp.itsc2003p0889

View Articletitled, Influence of Substrate Temperature on Formation of Micrometric Splats Obtained by Plasma Spraying Liquid Suspension

Modeling of Coating Formation and Heat Flux to Substrate by Particles and Plasma Jet in Plasma Spraying

G. Mariaux; E. Legros; A. Vardelle

ITSC 2003; 895-903https://doi.org/10.31399/asm.cp.itsc2003p0895

View Articletitled, Modeling of Coating Formation and Heat Flux to Substrate by Particles and Plasma Jet in Plasma Spraying

Partially Melted Particle and Its Splat Morphology

H. Zhang; H.B. Xiong; L.L. Zheng; A. Vaidya; L. Li

ITSC 2003; 905-911https://doi.org/10.31399/asm.cp.itsc2003p0905

View Articletitled, Partially Melted Particle and Its Splat Morphology

Synthesis of BCN Coatings in Thermal Plasma Jets

A. Wank; B. Wielage

ITSC 2003; 913-920https://doi.org/10.31399/asm.cp.itsc2003p0913

View Articletitled, Synthesis of BCN Coatings in Thermal Plasma Jets

Research on Fluid Properties of Low Energy, High Efficiency and Non-transferred Arc Plasma Jet

Zhijun Yan; Liantong An; Yang Gao; XiaoOu Huang

ITSC 2003; 921-925https://doi.org/10.31399/asm.cp.itsc2003p0921

View Articletitled, Research on Fluid Properties of Low Energy, High Efficiency and Non-transferred Arc Plasma Jet

Modeling Residual Stress Build-Up in the Coating Microstructure

R. Ghafouri-Azar; S. Chandra; J. Mostaghimi

ITSC 2003; 927-930https://doi.org/10.31399/asm.cp.itsc2003p0927

View Articletitled, Modeling Residual Stress Build-Up in the Coating Microstructure

Model of Thermal Spraying Using a Monte-Carlo Approach

T. Zhang; B. Liu; Y. Bao; D.T. Gawne

ITSC 2003; 931-938https://doi.org/10.31399/asm.cp.itsc2003p0931

View Articletitled, Model of Thermal Spraying Using a Monte-Carlo Approach

Neural Networks, Design of Experiments and Other Optimization Methodologies to Quantify Parameter Dependence of Atmospheric Plasma Spraying

S. Guessasma; G. Montavon; C. Coddet

ITSC 2003; 939-948https://doi.org/10.31399/asm.cp.itsc2003p0939

View Articletitled, Neural Networks, Design of Experiments and Other Optimization Methodologies to Quantify Parameter Dependence of Atmospheric Plasma Spraying

Modeling of the Substrate Temperature Evolution during the APS Thermal Spray Process

R. Bolot; J. Li; R. Bonnet; C. Mateus; C. Coddet

ITSC 2003; 949-954https://doi.org/10.31399/asm.cp.itsc2003p0949

View Articletitled, Modeling of the Substrate Temperature Evolution during the APS Thermal Spray Process

Plasma Spraying Flow Modeling: Generation of the Plasma Column and Turbulent Flow into a Dense Atmosphere

D. Guenadou; E. Meillot

ITSC 2003; 955-963https://doi.org/10.31399/asm.cp.itsc2003p0955

View Articletitled, Plasma Spraying Flow Modeling: Generation of the Plasma Column and Turbulent Flow into a Dense Atmosphere

On the Study of the Thermal Fluxes Transferred during the HEATCOOL Process

R. Bolot; H. Deng; H. Liao; C. Coddet

ITSC 2003; 965-970https://doi.org/10.31399/asm.cp.itsc2003p0965

View Articletitled, On the Study of the Thermal Fluxes Transferred during the HEATCOOL Process

On the use of SYSWELD and PHOENICS for the Computation of Heat Transfer in a Substrate Exposed to an Impinging Plasma Jet

J. Li; R. Bolot; H. Liao; C. Coddet

ITSC 2003; 971-976https://doi.org/10.31399/asm.cp.itsc2003p0971

View Articletitled, On the use of SYSWELD and PHOENICS for the Computation of Heat Transfer in a Substrate Exposed to an Impinging Plasma Jet

Application of CFD for Wire-Arc Nozzle Geometry Improvement

I. Gedzevicius; R. Bolot; H. Liao; C. Coddet; A.V. Valiulis

ITSC 2003; 977-980https://doi.org/10.31399/asm.cp.itsc2003p0977

View Articletitled, Application of CFD for Wire-Arc Nozzle Geometry Improvement

Conjugated Gradient Method for Estimating Inversely the Flux Distribution of Cooling Jets

Hanlin Liao; Hao Deng; Christian Coddet

ITSC 2003; 981-984https://doi.org/10.31399/asm.cp.itsc2003p0981

View Articletitled, Conjugated Gradient Method for Estimating Inversely the Flux Distribution of Cooling Jets

In-Flight Oxidation of Metallic Particles in Plasma Spraying

A.A. Syed; A. Denoirjean; P. Deniorjean; J.C. Labbe; P. Fauchais

ITSC 2003; 985-992https://doi.org/10.31399/asm.cp.itsc2003p0985

View Articletitled, In-Flight Oxidation of Metallic Particles in Plasma Spraying

Turbulence Modeling of Inductively Coupled Plasma Flows

S. Xue; P. Proulx; M.I. Boulos

ITSC 2003; 993-999https://doi.org/10.31399/asm.cp.itsc2003p0993

View Articletitled, Turbulence Modeling of Inductively Coupled Plasma Flows

Computer Modelling of the Plasma Spraying Process

Yu. Borisov; I. Krivtsun; A. Muzhichenko

ITSC 2003; 1001-1009https://doi.org/10.31399/asm.cp.itsc2003p1001

View Articletitled, Computer Modelling of the Plasma Spraying Process

Diagnostic of Supersonic High Frequency (HF) Plasma Flow

V. Léveillé; M.I. Boulos; D.A. Gravelle

ITSC 2003; 1011-1016https://doi.org/10.31399/asm.cp.itsc2003p1011

View Articletitled, Diagnostic of Supersonic High Frequency (HF) Plasma Flow

Modeling of Transport and Evaporation of Liquid Droplets Sprayed into RF-ICPs

Y. Shan; J. Mostaghimi

ITSC 2003; 1017-1022https://doi.org/10.31399/asm.cp.itsc2003p1017

View Articletitled, Modeling of Transport and Evaporation of Liquid Droplets Sprayed into RF-ICPs

Primary Breakup of Metal in the Wire Arc Spray Process

N.A. Hussary; J.V.R. Heberlein

ITSC 2003; 1023-1032https://doi.org/10.31399/asm.cp.itsc2003p1023

View Articletitled, Primary Breakup of Metal in the Wire Arc Spray Process

Oxidation of Ni-Based Alloys Sprayed by a Water-Stabilized Plasma Gun (WSP)

K. Voleník; P. Chráska; J. Dubský; J. Had; J. Leitner; O. Schneeweiss

ITSC 2003; 1033-1040https://doi.org/10.31399/asm.cp.itsc2003p1033

View Articletitled, Oxidation of Ni-Based Alloys Sprayed by a Water-Stabilized Plasma Gun (WSP)

Substrate Melting During Thermal Spray Splat Quenching: Case Study for Molybdenum Droplets on Various Substrates

L. Li; X.Y. Wang; A. Vaidya; S. Sampath; G. Wei; H. Zhang

ITSC 2003; 1041-1046https://doi.org/10.31399/asm.cp.itsc2003p1041

View Articletitled, Substrate Melting During Thermal Spray Splat Quenching: Case Study for Molybdenum Droplets on Various Substrates

Dependence of Thermal Sprayed Particle/Substrate Interface Microstructure on Substrate Temperature

M. Fukumoto; K. Hamada; M. Shiiba

ITSC 2003; 1047-1052https://doi.org/10.31399/asm.cp.itsc2003p1047

View Articletitled, Dependence of Thermal Sprayed Particle/Substrate Interface Microstructure on Substrate Temperature

Insights to Spraying Conditions, Microstructure and Properties and Their Statistical Correlation for Different Thermal Spraying Processes Using Complementary Characterization Methods

N. Margadant; S. Siegmann; T. Keller; W. Wagner; A. Kulkarni

ITSC 2003; 1053-1061https://doi.org/10.31399/asm.cp.itsc2003p1053

View Articletitled, Insights to Spraying Conditions, Microstructure and Properties and Their Statistical Correlation for Different Thermal Spraying Processes Using Complementary Characterization Methods

Polymerlike C:H Thin Film Coating of Nanopowders in Capacitively Coupled RF Discharge

A. Kouprine; F. Gitzhofer; M. Boulos; A. Fridman

ITSC 2003; 1063-1067https://doi.org/10.31399/asm.cp.itsc2003p1063

View Articletitled, Polymerlike <em>C:H</em> Thin Film Coating of Nanopowders in Capacitively Coupled RF Discharge

Field Electron Emission from Surface of Plasma Sprayed and Laser Engraved AI₂O₃+13TiO₂ and Al₂O₃+40TiO₂ Coatings

Z. Znamirowski; W. Czarczynski; F. Campana; J.-P. Janssen; M. Rivenet; R.-N. Vannier; L. Pawlowski

ITSC 2003; 1069-1073https://doi.org/10.31399/asm.cp.itsc2003p1069

View Articletitled, Field Electron Emission from Surface of Plasma Sprayed and Laser Engraved AI<sub>2</sub>O<sub>3</sub>+13TiO<sub>2</sub> and Al<sub>2</sub>O<sub>3</sub>+40TiO<sub>2</sub> Coatings

Powder Densification and Spheroidization Using Induction Plasma Technology

X. Fan; J. Guo; N. Dignard; C. Normand

ITSC 2003; 1075-1079https://doi.org/10.31399/asm.cp.itsc2003p1075

View Articletitled, Powder Densification and Spheroidization Using Induction Plasma Technology

Effect of Particle Size and Spray Distance on the Features of Plasma Sprayed Cast Iron

M.F. Morks; M.A. Shoeib; Y. Tsunekawa; M. Okumiya

ITSC 2003; 1081-1085https://doi.org/10.31399/asm.cp.itsc2003p1081

View Articletitled, Effect of Particle Size and Spray Distance on the Features of Plasma Sprayed Cast Iron

Effect of the Chamber Pressure on the Structure of a Plasma Jet

R. Bolot; D. Klein; C. Coddet

ITSC 2003; 1087-1092https://doi.org/10.31399/asm.cp.itsc2003p1087

View Articletitled, Effect of the Chamber Pressure on the Structure of a Plasma Jet

Sensors and Controls

Control of Particle Temperature, Velocity, and Trajectory in the Thermal Spray Process

J.R. Fincke; W.D. Swank; R.L. Bewley; D.C. Haggard; M. Gevelber; D. Wroblewski

ITSC 2003; 1093-1099https://doi.org/10.31399/asm.cp.itsc2003p1093

View Articletitled, Control of Particle Temperature, Velocity, and Trajectory in the Thermal Spray Process

Sensitivity Study of Four On-Line Diagnostic Systems for Plasma Spraying

P. Nylén; J. Lemaitre; J. Wigren

ITSC 2003; 1101-1106https://doi.org/10.31399/asm.cp.itsc2003p1101

View Articletitled, Sensitivity Study of Four On-Line Diagnostic Systems for Plasma Spraying

Particle Temperature and Velocity Measurements by Two-Wavelength Streak Imaging

J.E. Craig; R.A. Parker; D.Y. Lee; T. Wakeman; J. Heberlein; D. Guru

ITSC 2003; 1107-1112https://doi.org/10.31399/asm.cp.itsc2003p1107

View Articletitled, Particle Temperature and Velocity Measurements by Two-Wavelength Streak Imaging

In-Flight Particle Imaging in Thermal Spraying with Diode Laser Illumination

J. Larjo; E. Hämäläinen; N. Kriikka

ITSC 2003; 1113-1116https://doi.org/10.31399/asm.cp.itsc2003p1113

View Articletitled, In-Flight Particle Imaging in Thermal Spraying with Diode Laser Illumination

Simple Self-Selective Method of Velocity Measurement for Particles in Spray Coating

M. Lebedev; J. Akedo

ITSC 2003; 1117-1120https://doi.org/10.31399/asm.cp.itsc2003p1117

View Articletitled, Simple Self-Selective Method of Velocity Measurement for Particles in Spray Coating

Real-Time Control for Plasma Spray: Production Issues and Distribution Implications

M. Gevelber; C. Cui; B. Vattiat; D. Wroblewski; J.R. Fincke; W.D. Swank

ITSC 2003; 1121-1130https://doi.org/10.31399/asm.cp.itsc2003p1121

View Articletitled, Real-Time Control for Plasma Spray: Production Issues and Distribution Implications

Integration of a Feedback Controller into a Standard In-Flight Particle Sensor

J. Blain; L. Pouliot; F. Nadeau; J.-F. Bisson; G. Vaudreuil; C. Moreau

ITSC 2003; 1131-1138https://doi.org/10.31399/asm.cp.itsc2003p1131

View Articletitled, Integration of a Feedback Controller into a Standard In-Flight Particle Sensor

Correlations Between Processing Parameters, Coatings Properties and In-Flight Particle Characteristics

S. Guessasma; G. Montavon; C. Coddet

ITSC 2003; 1139-1147https://doi.org/10.31399/asm.cp.itsc2003p1139

View Articletitled, Correlations Between Processing Parameters, Coatings Properties and In-Flight Particle Characteristics

A Numerical Study of the Sources of Variation in In-Flight Particle Characteristics in Atmospheric Plasma Spraying

M. Friis; P. Nylén

ITSC 2003; 1149-1155https://doi.org/10.31399/asm.cp.itsc2003p1149

View Articletitled, A Numerical Study of the Sources of Variation in In-Flight Particle Characteristics in Atmospheric Plasma Spraying

Modern Gas Supply Systems for Thermal Spraying

Dave Park; W. Krömmer; P. Heinrich

ITSC 2003; 1157-1164https://doi.org/10.31399/asm.cp.itsc2003p1157

View Articletitled, Modern Gas Supply Systems for Thermal Spraying

How to Improve the Reliability and Reproducibility of Plasma Sprayed Coatings

P. Fauchais; M. Vardelle

ITSC 2003; 1165-1173https://doi.org/10.31399/asm.cp.itsc2003p1165

View Articletitled, How to Improve the Reliability and Reproducibility of Plasma Sprayed Coatings

Investigations of In-Flight Particle Characteristics Through DPV Measurements and Correlation with Impact Analysis and Coating Properties

M.P. Planche; A. Lakat; H. Liao; C. Coddet

ITSC 2003; 1175-1182https://doi.org/10.31399/asm.cp.itsc2003p1175

View Articletitled, Investigations of In-Flight Particle Characteristics Through DPV Measurements and Correlation with Impact Analysis and Coating Properties

Particle Temperature and Velocity Characterization in Spray Tooling Process by Thermal Imaging Technique

P.S. Mohanty; R. Allor; P. Lechowicz; R. Parker; J. Craig

ITSC 2003; 1183-1190https://doi.org/10.31399/asm.cp.itsc2003p1183

View Articletitled, Particle Temperature and Velocity Characterization in Spray Tooling Process by Thermal Imaging Technique

Influences on the Kinematics of the APS-Process Investigated by Means of Particle Image Velocimetry

Fr.-W. Bach; K. Möhwald; B. Drößler; J. Prehm; T. Rothardt; T. Copitzky

ITSC 2003; 1191-1196https://doi.org/10.31399/asm.cp.itsc2003p1191

View Articletitled, Influences on the Kinematics of the APS-Process Investigated by Means of Particle Image Velocimetry

Particle Properties Tailor Coating Microstructure, Porosity and Phase Composition

J.-E. Döring; R. Vaßen; D. Stöver; R.G. Castro

ITSC 2003; 1197-1204https://doi.org/10.31399/asm.cp.itsc2003p1197

View Articletitled, Particle Properties Tailor Coating Microstructure, Porosity and Phase Composition

The Influence of Spray Parameters on Ni20Cr Coating Properties Using On-line Optimization Process

J.M. Guilemany; J. Nin; J.R. Miguel; J. Navarro; M. Gaona

ITSC 2003; 1205-1212https://doi.org/10.31399/asm.cp.itsc2003p1205

View Articletitled, The Influence of Spray Parameters on Ni20Cr Coating Properties Using On-line Optimization Process

On-Line Monitoring Assisted Spray Process Optimization of Thermal Barrier Coatings

A. Tricoire; E. Legros; A. Vardelle; S. Ahmaniemi; P. Vuoristo; T. Mäntylä

ITSC 2003; 1213-1220https://doi.org/10.31399/asm.cp.itsc2003p1213

View Articletitled, On-Line Monitoring Assisted Spray Process Optimization of Thermal Barrier Coatings

Diagnostics at Thermal Coating Processes – Research Results of the DFG-Founded Project

Fr.-W. Bach; R. Henne; K. Landes; E. Lugscheider; T. Copitzky; J. Prehm; B. Droessler; F. Ernst; A. Fischer; K. Seemann; T. Streibl; S. Zimmermann; E. Bouyer

ITSC 2003; 1221-1227https://doi.org/10.31399/asm.cp.itsc2003p1221

View Articletitled, Diagnostics at Thermal Coating Processes – Research Results of the DFG-Founded Project

Experimental Study of Substrate Thermal Conditions at APS and HVOF

A. Zagorski; F. Szuecs; V. Belashchenko; A. Ivanov; S. Siegmann; N. Margadant

ITSC 2003; 1225-1260https://doi.org/10.31399/asm.cp.itsc2003p1255

View Articletitled, Experimental Study of Substrate Thermal Conditions at APS and HVOF

Influence of Secondary Hydrogen on the Microstructure of Plasma-Sprayed Yttria-Stabilized Zirconia Coatings

J.F. Bisson; C. Moreau; M. Dorfman; C. Dambra; J. Mallon

ITSC 2003; 1229-1235https://doi.org/10.31399/asm.cp.itsc2003p1229

View Articletitled, Influence of Secondary Hydrogen on the Microstructure of Plasma-Sprayed Yttria-Stabilized Zirconia Coatings

Production Experience of On-Line Diagnostic Systems in Plasma and Flame Spraying

J. Wigren; P. Nylén

ITSC 2003; 1237-1242https://doi.org/10.31399/asm.cp.itsc2003p1237

View Articletitled, Production Experience of On-Line Diagnostic Systems in Plasma and Flame Spraying

Industrial On-Line Control of HVOF Spray Process Using SDC System

C. Bossoutrot; F. Braillard; S. Bansard; M. Vardelle; P. Fauchais

ITSC 2003; 1243-1248https://doi.org/10.31399/asm.cp.itsc2003p1243

View Articletitled, Industrial On-Line Control of HVOF Spray Process Using SDC System

On-line Optical Diagnostics of a Rotating Internal Diameter Plasma Spray Gun Used for Coating of Cylinder Bores in Automotive Industry

E. Hämäläinen; N. Kriikka; G. Barbezat

ITSC 2003; 1249-1253https://doi.org/10.31399/asm.cp.itsc2003p1249

View Articletitled, On-line Optical Diagnostics of a Rotating Internal Diameter Plasma Spray Gun Used for Coating of Cylinder Bores in Automotive Industry

Fluid Dynamic Effects on Plasma Torch Anode Erosion

X. Sun; J. Heberlein

ITSC 2003; 1261-1267https://doi.org/10.31399/asm.cp.itsc2003p1261

View Articletitled, Fluid Dynamic Effects on Plasma Torch Anode Erosion

DC Plasma Diagnostics for Improvement of Plasma Spraying Process under Soft Vacuum Conditions

V. Rat; E. Bouyer; R.H. Henne; W. Mayr

ITSC 2003; 1269-1278https://doi.org/10.31399/asm.cp.itsc2003p1269

View Articletitled, DC Plasma Diagnostics for Improvement of Plasma Spraying Process under Soft Vacuum Conditions

Examination of the Dry Ice Removal Process for Thermal Sprayed Coatings by Particle Image Velocimetry

C.F. Redeker; Fr.-W. Bach; T. Copitzky

ITSC 2003; 1279-1284https://doi.org/10.31399/asm.cp.itsc2003p1279

View Articletitled, Examination of the Dry Ice Removal Process for Thermal Sprayed Coatings by Particle Image Velocimetry

Testing and Characterization

Chemical Reactions between Hydroxyapatite (HA) and Titania during HVOF Spraying and In Vitro Response of the HA/Titania Composite Coating

H. Li; K.A. Khor; P. Cheang

ITSC 2003; 1285-1290https://doi.org/10.31399/asm.cp.itsc2003p1285

View Articletitled, Chemical Reactions between Hydroxyapatite (HA) and Titania during HVOF Spraying and In Vitro Response of the HA/Titania Composite Coating

Microstructure and Properties of Micro-Plasma Sprayed Cu Coating

C.-J. Li; B. Sun; M. Wang; F. Han; T. Wu

ITSC 2003; 1291-1296https://doi.org/10.31399/asm.cp.itsc2003p1291

View Articletitled, Microstructure and Properties of Micro-Plasma Sprayed Cu Coating

Residual Stress Analysis in Thermally Sprayed Layer Composites, Using the Microhole Milling and Drilling Method

M. Escribano; R. Gadow; M. Buchmann

ITSC 2003; 1297-1305https://doi.org/10.31399/asm.cp.itsc2003p1297

View Articletitled, Residual Stress Analysis in Thermally Sprayed Layer Composites, Using the Microhole Milling and Drilling Method

Highly Porous Deposits of Cr₂O₃ Prepared by Plasma Co-spraying of Cr₂O₃ and Al

K. Neufuss; B. Kolman; P. Ctibor; P. Chráska; J. Laakso; S. Ahmaniemi; P. Vuoristo; T. Mäntylä

ITSC 2003; 1307-1310https://doi.org/10.31399/asm.cp.itsc2003p1307

View Articletitled, Highly Porous Deposits of Cr<sub>2</sub>O<sub>3</sub> Prepared by Plasma Co-spraying of Cr<sub>2</sub>O<sub>3</sub> and Al

Improvement of the Properties of Thermally Sprayed Ceramic Coating by the Infiltration of the Adhesives

C.-J. Li; G.-J. Yang; A. Ohmori

ITSC 2003; 1311-1316https://doi.org/10.31399/asm.cp.itsc2003p1311

View Articletitled, Improvement of the Properties of Thermally Sprayed Ceramic Coating by the Infiltration of the Adhesives

Interconnected Porosity of Plasma Sprayed Alumina Coatings: Evaluation and Modification

T. Haure; A. Denoirjean; P. Tristant; J. Desmaison; P. Fauchais; A. Maître

ITSC 2003; 1317-1324https://doi.org/10.31399/asm.cp.itsc2003p1317

View Articletitled, Interconnected Porosity of Plasma Sprayed Alumina Coatings: Evaluation and Modification

Evaluation of the Photodecomposition Efficiency of the Nanostructured TiO₂ Sol Precursor Plasma Coatings

Hanshin Choi; Changmin Han; Changhee Lee; Hyungjun Kim

ITSC 2003; 1325-1329https://doi.org/10.31399/asm.cp.itsc2003p1325

View Articletitled, Evaluation of the Photodecomposition Efficiency of the Nanostructured TiO<sub>2</sub> Sol Precursor Plasma Coatings

Photocatalytic Properties of TiO₂ Coatings as a Function of Coating and Substrate Characteristics

F.L. Toma; N. Berger-Keller; G. Bertrand; D. Klein; C. Coddet

ITSC 2003; 1331-1335https://doi.org/10.31399/asm.cp.itsc2003p1331

View Articletitled, Photocatalytic Properties of TiO<sub>2</sub> Coatings as a Function of Coating and Substrate Characteristics

Optical Emission Spectroscopic Diagnostics of Atmospheric Argon Radio Frequency Inductively Coupled Plasma

G. Gao; L. Pershin; J. Mostaghimi

ITSC 2003; 1337-1346https://doi.org/10.31399/asm.cp.itsc2003p1337

View Articletitled, Optical Emission Spectroscopic Diagnostics of Atmospheric Argon Radio Frequency Inductively Coupled Plasma

Analysis of Electronic Properties of TiO₂ (001) Surface Based on Band Calculations

A. Kellou; F-L. Toma; H. Aourag; D. Klein; C. Coddet

ITSC 2003; 1347-1350https://doi.org/10.31399/asm.cp.itsc2003p1347

View Articletitled, Analysis of Electronic Properties of TiO<sub>2</sub> (001) Surface Based on Band Calculations

Rolling Contact Fatigue of Hot Isostatic Pressed WC-NiCrBSi Thermal Spray Coatings

S. Stewart; R. Ahmed; M.Tsuyoshi Itsukaichi; S. Tobe

ITSC 2003; 1351-1359https://doi.org/10.31399/asm.cp.itsc2003p1351

View Articletitled, Rolling Contact Fatigue of Hot Isostatic Pressed WC-NiCrBSi Thermal Spray Coatings

Influences of Substrate Roughness and Temperature on Adhesive Strength in Thermal Spray Coatings

H. Fukanuma; N. Ohno

ITSC 2003; 1361-1368https://doi.org/10.31399/asm.cp.itsc2003p1361

View Articletitled, Influences of Substrate Roughness and Temperature on Adhesive Strength in Thermal Spray Coatings

Elastic Modulus Measurements via Laser-Ultrasonic and Knoop Indentation Techniques

R.S. Lima; S.E. Kruger; G. Lamouche; B.R. Marple

ITSC 2003; 1369-1378https://doi.org/10.31399/asm.cp.itsc2003p1369

View Articletitled, Elastic Modulus Measurements via Laser-Ultrasonic and Knoop Indentation Techniques

Young's Modulus and Fatigue Behavior of Plasma Sprayed Alumina Coatings

O. Kovářík; J. Siegl; J. Nohava; P. Chráska

ITSC 2003; 1379-1386https://doi.org/10.31399/asm.cp.itsc2003p1379

View Articletitled, Young's Modulus and Fatigue Behavior of Plasma Sprayed Alumina Coatings

Microstructure and Electrical Properties of RF and DC Plasma-Sprayed TiO₂ Coatings

N. Branland; E. Meillot; P. Fauchais; A. Vardelle; F. Gitzhofer; M. Boulos

ITSC 2003; 1387-1394https://doi.org/10.31399/asm.cp.itsc2003p1387

View Articletitled, Microstructure and Electrical Properties of RF and DC Plasma-Sprayed TiO<sub>2</sub> Coatings

Quantitative Characterization of the Microstructure of Plasma-sprayed Alumina Coatings Based on Visualization of Infiltrated Element

C.-J. Li; W.-Z. Wang; H.-Y. Wang

ITSC 2003; 1395-1401https://doi.org/10.31399/asm.cp.itsc2003p1395

View Articletitled, Quantitative Characterization of the Microstructure of Plasma-sprayed Alumina Coatings Based on Visualization of Infiltrated Element

Influence of Plasma Spray Parameters on Microstructural Characteristics of TiO₂ Deposits

N. Berger - Keller; G. Bertrand; C. Coddet; C. Meunier

ITSC 2003; 1403-1408https://doi.org/10.31399/asm.cp.itsc2003p1403

View Articletitled, Influence of Plasma Spray Parameters on Microstructural Characteristics of TiO<sub>2</sub> Deposits

Structure and Magnetic Properties of Iron-Based Alloys Obtained by APS Thermal Spraying

N.E. Fenineche; M. Cherigui; A. Kellou; H. Aourag; C. Coddet

ITSC 2003; 1409-1412https://doi.org/10.31399/asm.cp.itsc2003p1409

View Articletitled, Structure and Magnetic Properties of Iron-Based Alloys Obtained by APS Thermal Spraying

Structure and Properties of Plasma Sprayed Wollastonite Coatings

Xuanyong Liu; Yi Zeng; Chuanxian Ding

ITSC 2003; 1413-1417https://doi.org/10.31399/asm.cp.itsc2003p1413

View Articletitled, Structure and Properties of Plasma Sprayed Wollastonite Coatings

Microstructural Characterization Across Length Scales of Thermal Sprayed Ni-5wt%Al Coatings

S. Deshpande; S. Sampath; P.I. Gouma; H. Herman

ITSC 2003; 1419-1428https://doi.org/10.31399/asm.cp.itsc2003p1419

View Articletitled, Microstructural Characterization Across Length Scales of Thermal Sprayed Ni-5wt%Al Coatings

Investigation of Heat Treatment on the Microstructure of Twin Wire Arc Sprayed Copper Alloys

B. Wielage; S. Steinhäuser; G. Reisel; A. Wank; O. Brandt

ITSC 2003; 1429-1432https://doi.org/10.31399/asm.cp.itsc2003p1429

View Articletitled, Investigation of Heat Treatment on the Microstructure of Twin Wire Arc Sprayed Copper Alloys

Microcrystallographic Study of Plasma Sprayed Alumina Deposit by Transmission Electron Microscopy

Nur Ismarrubie Zahari; M. Sugano; T. Satake; A. Ohmori

ITSC 2003; 1433-1440https://doi.org/10.31399/asm.cp.itsc2003p1433

View Articletitled, Microcrystallographic Study of Plasma Sprayed Alumina Deposit by Transmission Electron Microscopy

Titanium Suboxide Coatings Prepared by VPS Spraying

T. Naumann; L.-M. Berger; M. Ingwerth; P. Vuoristo

ITSC 2003; 1441-1445https://doi.org/10.31399/asm.cp.itsc2003p1441

View Articletitled, Titanium Suboxide Coatings Prepared by VPS Spraying

Epoxies Used in Tensile Testing: Film vs. Liquid-Why is There a Difference?

John P. Sauer; Steve Ruoff

ITSC 2003; 1447-1453https://doi.org/10.31399/asm.cp.itsc2003p1447

View Articletitled, Epoxies Used in Tensile Testing: Film vs. Liquid-Why is There a Difference?

Thermal and Environmental Barrier Coatings

New Material Concepts for the Next Generation of Plasma-Sprayed Thermal Barrier Coatings

D. Stöver; G. Pracht; H. Lehmann; M. Dietrich; J.-E. Döring; R. Vaßen

ITSC 2003; 1455-1462https://doi.org/10.31399/asm.cp.itsc2003p1455

View Articletitled, New Material Concepts for the Next Generation of Plasma-Sprayed Thermal Barrier Coatings

Improved Oxidation Life of Segmented Plasma Sprayed 8YSZ Thermal Barrier Coatings

James L. Smialek

ITSC 2003; 1463-1470https://doi.org/10.31399/asm.cp.itsc2003p1463

View Articletitled, Improved Oxidation Life of Segmented Plasma Sprayed 8YSZ Thermal Barrier Coatings

Study of Unique Microstructure in SPS Ceramic NanoCoatings

X.Q. Ma; J. Roth; T.D. Xiao; M. Gell

ITSC 2003; 1471-1476https://doi.org/10.31399/asm.cp.itsc2003p1471

View Articletitled, Study of Unique Microstructure in SPS Ceramic NanoCoatings

Characterization of Modified Thick Thermal Barrier Coatings

S. Ahmaniemi; J. Tuominen; M. Vippola; P. Vuoristo; T. Mäntylä; F. Cernuschi; C. Gualco; A. Bonadei; R. Di Maggio

ITSC 2003; 1477-1486https://doi.org/10.31399/asm.cp.itsc2003p1477

View Articletitled, Characterization of Modified Thick Thermal Barrier Coatings

Non-Destructive Microstructural Evaluation of Thermal Barrier Coatings by Electrochemical Impedance Spectroscopy

S. Vishweswaraiah; B. Jayaraj; T. Du; V.H. Desai; Y.H. Sohn

ITSC 2003; 1487-1493https://doi.org/10.31399/asm.cp.itsc2003p1487

View Articletitled, Non-Destructive Microstructural Evaluation of Thermal Barrier Coatings by Electrochemical Impedance Spectroscopy

Thermally Grown Oxides on Electroplated Bond Coats under APS TBC

Abdus Khan; Thomas Duda; Alan Taylor; Peter Moore; Peter Rutter; John Foster

ITSC 2003; 1495-1498https://doi.org/10.31399/asm.cp.itsc2003p1495

View Articletitled, Thermally Grown Oxides on Electroplated Bond Coats under APS TBC

The Use of Acoustic Emission Techniques for Characterizing Failure Mechanisms of Thermal Barrier Coatings Under Thermal Cycling Conditions

Philippe C. Robin; François Gitzhofer; Maher I. Boulos

ITSC 2003; 1499-1505https://doi.org/10.31399/asm.cp.itsc2003p1499

View Articletitled, The Use of Acoustic Emission Techniques for Characterizing Failure Mechanisms of Thermal Barrier Coatings Under Thermal Cycling Conditions

Analysis of Pore Connectivity Modification and Structure Densification of Y-PSZ Coatings After In Situ Laser Remelting Implementing Electrochemical Test

G. Antou; F. Hlawka; A. Cornet; G. Montavon; C. Coddet; J. Staerck; O. Fréneaux

ITSC 2003; 1507-1511https://doi.org/10.31399/asm.cp.itsc2003p1507

View Articletitled, Analysis of Pore Connectivity Modification and Structure Densification of Y-PSZ Coatings After In Situ Laser Remelting Implementing Electrochemical Test

A Raman Study on Plasma-Sprayed Thermal Barrier Coatings During Thermal Cycling

F. Niccolai; U. Bardi; M. Muniz Miranda; M. Giannozzi

ITSC 2003; 1513-1516https://doi.org/10.31399/asm.cp.itsc2003p1513

View Articletitled, A Raman Study on Plasma-Sprayed Thermal Barrier Coatings During Thermal Cycling

Synthesis and Oxidation Behavior of Nanocrystalline MCrAlY Bond Coats

Leonardo Ajdelsztajn; Feng Tang; Julie M. Schoenung; Josep Picas; Geoge E. Kim; Virgil Provenzano

ITSC 2003; 1517-1524https://doi.org/10.31399/asm.cp.itsc2003p1517

View Articletitled, Synthesis and Oxidation Behavior of Nanocrystalline MCrAlY Bond Coats

Hot Corrosion Behavior of Graded Thermal Barrier Coatings Formed by Plasma Spraying Process

N. Mifune; Y. Harada; T. Doi; R. Yamasaki

ITSC 2003; 1525-1530https://doi.org/10.31399/asm.cp.itsc2003p1525

View Articletitled, Hot Corrosion Behavior of Graded Thermal Barrier Coatings Formed by Plasma Spraying Process

Functionally Graded HVOF Sprayed NiCr-Al₂O₃ Coatings for Demanding Applications

E. Turunen; T. Varis; K. Ruusuvuori; T.E. Gustafsson; S.-P. Hannula; M. Gasik; E. Antila

ITSC 2003; 1531-1534https://doi.org/10.31399/asm.cp.itsc2003p1531

View Articletitled, Functionally Graded HVOF Sprayed NiCr-Al<sub>2</sub>O<sub>3</sub> Coatings for Demanding Applications

Wear Resistance of Nanostructured Thermal Barrier Coatings

R. Soltani; T.W. Coyle; J. Mostaghimi

ITSC 2003; 1535-1540https://doi.org/10.31399/asm.cp.itsc2003p1535

View Articletitled, Wear Resistance of Nanostructured Thermal Barrier Coatings

Structure and Properties of CaZrO₃ Coatings Prepared by WSP and APS Spraying

K. Neufuss; J. Dubsky; P. Rohan; B. Kolman; P. Chraska; L.-M. Berger; R. Zieris; S. Thiele; M. Nebelung

ITSC 2003; 1541-1546https://doi.org/10.31399/asm.cp.itsc2003p1541

View Articletitled, Structure and Properties of CaZrO<sub>3</sub> Coatings Prepared by WSP and APS Spraying

The Effect of a High Thermal Gradient on Sintering and Stiffening in the Top Coat of a Thermal Barrier Coating (TBC) System

S.A. Tsipas; I.O. Golosnoy; T.W. Clyne

ITSC 2003; 1547-1552https://doi.org/10.31399/asm.cp.itsc2003p1547

View Articletitled, The Effect of a High Thermal Gradient on Sintering and Stiffening in the Top Coat of a Thermal Barrier Coating (TBC) System

Fracture Mechanics Analysis of Microcracks in Thermally Cycled Thermal Barrier Coatings

Y. Liu; C. Persson; S. Melin

ITSC 2003; 1553-1556https://doi.org/10.31399/asm.cp.itsc2003p1553

View Articletitled, Fracture Mechanics Analysis of Microcracks in Thermally Cycled Thermal Barrier Coatings

Micromechanical Analysis of Plasma Sprayed TBC: Anisotropic Elastic and Conductive Properties in Terms of Microstructure and Experimental Verification on YSZ Coatings

I. Sevostianov; M. Kachanov; J. Ruud; P. Lorraine; M. Dubois

ITSC 2003; 1557-1563https://doi.org/10.31399/asm.cp.itsc2003p1557

View Articletitled, Micromechanical Analysis of Plasma Sprayed TBC: Anisotropic Elastic and Conductive Properties in Terms of Microstructure and Experimental Verification on YSZ Coatings

The Influence of Thermal Barrier Top Coating on The Initiation and Growth of Thermally Grown Oxide

K. Ogawa; N. Gotoh; T. Shoji

ITSC 2003; 1565-1571https://doi.org/10.31399/asm.cp.itsc2003p1565

View Articletitled, The Influence of Thermal Barrier Top Coating on The Initiation and Growth of Thermally Grown Oxide

Correlation Between Spraying Conditions and Micro Crack Density and Their Influence on Thermal Cycling Life of Thermal Barrier Coatings

Robert Vaßen; Franziska Traeger; Detlev Stöver

ITSC 2003; 1573-1581https://doi.org/10.31399/asm.cp.itsc2003p1573

View Articletitled, Correlation Between Spraying Conditions and Micro Crack Density and Their Influence on Thermal Cycling Life of Thermal Barrier Coatings

Behavior and Characterization of Two 7-8 wt% Yttria-Stabilized Zirconia Powders and Coatings Produced Using Plasma Spray Deposition

J.F. Bisson; C. Moreau; M. Dorfman; C. Dambra; J. Mallon

ITSC 2003; 1583-1589https://doi.org/10.31399/asm.cp.itsc2003p1583

View Articletitled, Behavior and Characterization of Two 7-8 wt% Yttria-Stabilized Zirconia Powders and Coatings Produced Using Plasma Spray Deposition

Comparison of Particle In-Flight Characteristics and Coating Properties

St. Siegmann; N. Margadant; A. Zagorski; M. Arana-Antelo

ITSC 2003; 1591-1598https://doi.org/10.31399/asm.cp.itsc2003p1591

View Articletitled, Comparison of Particle In-Flight Characteristics and Coating Properties

Plasma Sprayed Coatings with Engineered Microstructures

S.N. Basu; G. Ye; C. Cui; M. Gevelber; D. Wroblewski; J.R. Fincke; W.D. Swank

ITSC 2003; 1599-1608https://doi.org/10.31399/asm.cp.itsc2003p1599

View Articletitled, Plasma Sprayed Coatings with Engineered Microstructures

Processing of Y-PSZ Thermal Barrier Coatings Implementing a High Power Laser Diode: Process Parameters

G. Antou; F. Hlawka; A. Cornet; G. Montavon; C. Coddet; J. Staerck; O. Fréneaux

ITSC 2003; 1609-1615https://doi.org/10.31399/asm.cp.itsc2003p1609

View Articletitled, Processing of Y-PSZ Thermal Barrier Coatings Implementing a High Power Laser Diode: Process Parameters

Influence of Spraying Variables and of a New Zirconia Hollow Powder on the Microstructure of Plasma Sprayed Thermal Barrier Coating

P. Roy; G. Bertrand; C. Coddet

ITSC 2003; 1617-1623https://doi.org/10.31399/asm.cp.itsc2003p1617

View Articletitled, Influence of Spraying Variables and of a New Zirconia Hollow Powder on the Microstructure of Plasma Sprayed Thermal Barrier Coating

A New Environmental Barrier Coating System on Carbon-Fiber Reinforced Silicon Carbide Composites

S. Latzel; R. Vaßen; D. Stöver

ITSC 2003; 1625-1630https://doi.org/10.31399/asm.cp.itsc2003p1625

View Articletitled, A New Environmental Barrier Coating System on Carbon-Fiber Reinforced Silicon Carbide Composites

Phase Precipitation in NiCoCrAlY Bondcoat at High Temperature

T. Koomparkping; S. Damrongrat; P. Niranatlumpong

ITSC 2003; 1631-1634https://doi.org/10.31399/asm.cp.itsc2003p1631

View Articletitled, Phase Precipitation in NiCoCrAlY Bondcoat at High Temperature

Thermal Spraying of Polymers

Thermal Spraying of Polymers: Spraying Processes, Materials and New Trends

R. Winkler; F. Bültmann; S. Hartmann; A. Jerz

ITSC 2003; 1635-1638https://doi.org/10.31399/asm.cp.itsc2003p1635

View Articletitled, Thermal Spraying of Polymers: Spraying Processes, Materials and New Trends

Influence of Polymer Composition on the Deposition of UHMWPE Coatings

D.T. Gawne; Y. Bao; T. Zhang

ITSC 2003; 1639-1644https://doi.org/10.31399/asm.cp.itsc2003p1639

View Articletitled, Influence of Polymer Composition on the Deposition of UHMWPE Coatings

Production of Composite Powder by Fluidized-bed Granulation Process and Evaluation of Sprayed Coating Properties

R. Kawase; A. Mizuma; Y. Tanaka

ITSC 2003; 1645-1649https://doi.org/10.31399/asm.cp.itsc2003p1645

View Articletitled, Production of Composite Powder by Fluidized-bed Granulation Process and Evaluation of Sprayed Coating Properties

Analysis of Deposition Process for Composite Polymer Thermally Sprayed Coatings

Yu. Borisov; I. Sviridova; V. Korzhik; N. Fialko

ITSC 2003; 1651-1657https://doi.org/10.31399/asm.cp.itsc2003p1651

View Articletitled, Analysis of Deposition Process for Composite Polymer Thermally Sprayed Coatings

Ceramic / Fluoropolymer Composite Coatings by Thermal Spraying : Effects of Parameters

C. Mateus; S. Costil; C. Coddet

ITSC 2003; 1659-1665https://doi.org/10.31399/asm.cp.itsc2003p1659

View Articletitled, Ceramic / Fluoropolymer Composite Coatings by Thermal Spraying : Effects of Parameters

Microstructure and Properties of Thermally Sprayed Functionally Graded Coatings for Polymeric Substrates

M. Ivosevic; R. Knight; S.R. Kalidindi; G.R. Palmese; J.K. Sutter

ITSC 2003; 1667-1673https://doi.org/10.31399/asm.cp.itsc2003p1667

View Articletitled, Microstructure and Properties of Thermally Sprayed Functionally Graded Coatings for Polymeric Substrates

Residual Stresses in Inconel 625 Coating of Organic-Based Composites Obtained by Plasma Spraying with Atmosphere and Temperature Control (ATC)

B. Henry; F. Borit; V. Guipont; M. Jeandin; D. Pachoutinsky; J. Lu; E. Welvaert

ITSC 2003; 1675-1681https://doi.org/10.31399/asm.cp.itsc2003p1675

View Articletitled, Residual Stresses in Inconel 625 Coating of Organic-Based Composites Obtained by Plasma Spraying with Atmosphere and Temperature Control (ATC)

Optimal Substrate Preheating Model for Thermal Spray Deposition of Thermosets onto Polymer Matrix Composites

M. Ivosevic; R. Knight; S.R. Kalidindi; G.R. Palmese; A. Tsurikov; J.K. Sutter

ITSC 2003; 1683-1691https://doi.org/10.31399/asm.cp.itsc2003p1683

View Articletitled, Optimal Substrate Preheating Model for Thermal Spray Deposition of Thermosets onto Polymer Matrix Composites

Evaluation of Thermally Sprayed and Other Polymeric Coatings for use in Natural Gas Pipeline Components

P. Vuoristo; E. Leivo; E. Turunen; M. Leino; P. Järvelä; T. Mäntylä

ITSC 2003; 1693-1702https://doi.org/10.31399/asm.cp.itsc2003p1693

View Articletitled, Evaluation of Thermally Sprayed and Other Polymeric Coatings for use in Natural Gas Pipeline Components

Fracture and Rheological Behavior of Oxide Aluminum-Polymer Composite Sliding Bearing

M. Kireitseu

ITSC 2003; 1703-1709https://doi.org/10.31399/asm.cp.itsc2003p1703

View Articletitled, Fracture and Rheological Behavior of Oxide Aluminum-Polymer Composite Sliding Bearing

Volume Information

Preface

ITSC 2003; iii-vihttps://doi.org/10.31399/asm.cp.itsc2003fm01

View Articletitled, Preface

Organizing Committees

ITSC 2003; viihttps://doi.org/10.31399/asm.cp.itsc2003fm02

View Articletitled, Organizing Committees

Thermal Spray Hall of Fame

ITSC 2003; viiihttps://doi.org/10.31399/asm.cp.itsc2003fm03

View Articletitled, Thermal Spray Hall of Fame