Volumes | International Thermal Spray Conference | ASM International

Skip to Main Content

Skip Nav Destination

Proceedings Volume Cover

ITSC2002

March 4–6, 2002

Essen, Germany

Conference Sponsors:

Thermal Spray 2002: Proceedings from the International Thermal Spray Conference

Issue navigation

Case Studies
Replacement of Electroplating and Corrosion Protection
Modeling and Simulation of Particles
Diagnostic Systems
Process Diagnostics
Structure
Thermal Barrier Coatings
Nanostructured Materials
Thermal Spraying of Iron Aluminides
Toolmaking
Industry and Applications
Thermal Barrier and Ceramic Coating Processes
Thermal Spray Gases
Hardcoating by Welding and Laser Processing
Thermal Spraying of Tungsten Carbides and Cermets
Modeling and Simulation of Substrates and Coatings
High- and Low-Power Plasma Spraying Processes
Low-Pressure and Reactive Plasma Spraying Processes
Cold Spraying Processes
Metallurgical Analysis and Preparation
Corrosion and Wear Properties
Analytical Tools and Methods
High Velocity Oxy-Fuel Spraying of Superalloys
High Velocity Oxy-Fuel Processes
Atmospheric Plasma Spraying Processes
Emerging Thermal Spray Processes
Arc Wire Spraying Processes
Quality Control and Assurance
Coating Properties—Test, Measurement, and Characterization
Pre- and Post-Process Treatments
Characterization of Thermal Barrier Coatings
Surface Engineering via High Velocity Oxy-Fuel Spraying
Modeling and Simulation of Plasma Spray Processes and Laser Treatments
Materials and Powders
Applied Industrial Research
Novel Processes and Analytical Techniques
Poster Session: Equipment and Processes
Poster Session: Case Studies
Poster Session: Coating Properties—Test, Measurement, and Characterization
Poster Session: Process Modeling and Simulation
Poster Session: Plasma Transferred Arc Surfacing
Poster Session: Process Diagnostics
Poster Session: Quality Control and Assurance
Poster Session: Pre- and Post-Process Treatments
Poster Session: Influence of Gases and Powders
Volume Information

Thermal Spray 2002: Proceedings from the International Thermal Spray Conference

Case Studies

WSP-Sprayed Boron Carbide Coatings for Fusion Applications

J. Matějíček; K. Neufuss; P. Ctibor; P. Rohan; J. Dubský; P. Chráska; V. Brožek

ITSC 2002; 1-5doi:https://doi.org/10.31399/asm.cp.itsc2002p0001

Composite Functional Thermal Sprayed Coatings for Parabolic Antennas

Y. Borisov; V. Korzhyk; I. Kozjakov; I. Sviridova; A. Murashov; A. Borisova; V. Chub; N. Datzenko

ITSC 2002; 6-11doi:https://doi.org/10.31399/asm.cp.itsc2002p0006

Replacement of Electroplating and Corrosion Protection

HVOF Sprayed WC-Co-Cr as a Generic Coating Type for Replacement of Hard Chrome Plating

C. Reignier; A. Sturgeon; D. Lee; D. De Wet

ITSC 2002; 12-16doi:https://doi.org/10.31399/asm.cp.itsc2002p0012

HVOF Facility Qualification at an Airline – Importance and Benefits for Landing Gear Applications

J. Randolph

ITSC 2002; 17-22doi:https://doi.org/10.31399/asm.cp.itsc2002p0017

Thermisch gespritzte Korrosionsschutzschichten für sulfidierende Atmosphären (Thermal Sprayed Coatings for Reducing Sulfidizing Atmospheres at High Temperatures)

B. Aumüller; T. Weber; M. Schütze

ITSC 2002; 23-26doi:https://doi.org/10.31399/asm.cp.itsc2002p0023

Wire Arc Spraying of Zinc as Effective Method to Produce Anodes for the Corrosion Protection of Reinforced Concrete Structures

M. Knepper; A. Melzer

ITSC 2002; 27-31doi:https://doi.org/10.31399/asm.cp.itsc2002p0027

Modeling and Simulation of Particles

Heating of Porous Particles in the Plasma Flame

V. Hurevich; L. Pawlowski; I. Smurov

ITSC 2002; 32-36doi:https://doi.org/10.31399/asm.cp.itsc2002p0032

Effect of Surface Morphology of Substrate on Flattening Behavior of Freely Fallen Metal Droplet

M. Fukumoto; T. Nishiyama; E. Nishioka

ITSC 2002; 37-41doi:https://doi.org/10.31399/asm.cp.itsc2002p0037

Simulation of the Influence of Spray Parameters on Particle Properties in APS

E. Lugscheider; N. Papenfuß-Janzen

ITSC 2002; 42-46doi:https://doi.org/10.31399/asm.cp.itsc2002p0042

Diagnostic Systems

Particle Flux Imaging (PFI) and Particle Shape Imaging (PSI) – Two Innovative Diagnostics for Thermal Coating

K.D. Landes; T.V. Streibl; J. Zierhut

ITSC 2002; 47-51doi:https://doi.org/10.31399/asm.cp.itsc2002p0047

Optisches Prozessanalysesystem für das thermische Spritzen (Optical Process Analysis System for Thermal Spraying)

K. Schutte; B. Aumüller

ITSC 2002; 52-55doi:https://doi.org/10.31399/asm.cp.itsc2002p0052

Preliminary Study on Closed-Loop Control for APS Processes

C. Bossoutrot; F. Braillard; T. Renault; M. Vardelle; P. Fauchais

ITSC 2002; 56-61doi:https://doi.org/10.31399/asm.cp.itsc2002p0056

The Industrial Use of Diagnostic Technology for Plasma Spraying

A. Refke; G. Barbezat; H. Wernli

ITSC 2002; 62-65doi:https://doi.org/10.31399/asm.cp.itsc2002p0062

Low Cost Industrial Type Diagnostic System for Powder Jet Visualisation, Particle-Substrate Interaction and Coating Growth

P. Bertrand; I. Smurov; M. Ignatiev

ITSC 2002; 66-71doi:https://doi.org/10.31399/asm.cp.itsc2002p0066

Process Diagnostics

Application of Digital CCD Camera for Monitoring of Particle-In-Flight Parameters in Plasma and HVOF Spraying

M. Ignatiev; I. Smurov; P. Bertrand

ITSC 2002; 72-77doi:https://doi.org/10.31399/asm.cp.itsc2002p0072

Prozessdiagnostik an thermischen Beschichtungsverfahren – Neue Erkenntnisse aus den laufenden Arbeiten der DFG-geförderten Forschungsgruppe (Process Diagnostics at Thermal Spraying Processes – New Experiences from Current Projects of the DFG-Sponsored Research Groups)

Fr.-W. Bach; R. Henne; V. Borck; K. Landes; T. Streibl; E. Lugscheider; A. Fischer; K. Seemann; T. Copitzky; J. Prehm

ITSC 2002; 78-85doi:https://doi.org/10.31399/asm.cp.itsc2002p0078

On-Line-Monitoring Control of Stainless Steel Coatings Obtained by APS Processes

J.M. Guilemany; J. Nin; J. Delgado; C. Lorenzana

ITSC 2002; 86-90doi:https://doi.org/10.31399/asm.cp.itsc2002p0086

Structure

Volumetric and Size Characterization of Void Morphologies in Thermally Sprayed Metallic Deposits using Scattering Techniques

T. Keller; W. Wagner; J. Ilavsky; A.J. Allen; N. Margadant; S. Siegmann; G. Barbezat; J. Pisacka; R. Enzl

ITSC 2002; 91-95doi:https://doi.org/10.31399/asm.cp.itsc2002p0091

Zusammenhänge zwischen dem Gefüge und den Eigenschaften der TiC-haltigen Spritzschichten (Correlations in the Microstructure and Properties of TiC-Containing Thermal Spray Coatings)

T. Azarova; P. Vityaz; B. Wielage; S. Steinhäuser; H. Podlesak

ITSC 2002; 96-101doi:https://doi.org/10.31399/asm.cp.itsc2002p0096

Microstructures and Properties of Nanocrystalline Composite Coatings

F. Gärtner; C. Borchers; H. Kreye; N. Eigen; T. Klassen; R. Bormann; W. Krömmer; V. Borck

ITSC 2002; 102-106doi:https://doi.org/10.31399/asm.cp.itsc2002p0102

Evaluation of Plasma Deposited Alumina-Titania Ceramic Composite Coatings

A.K. Sharma; K. Vijayakumar; R. Krishnamurthy

ITSC 2002; 107-111doi:https://doi.org/10.31399/asm.cp.itsc2002p0107

Thermal Barrier Coatings

YSZ Film Deposition by Thermal Plasma Assisted Chemical Vapor Deposition in Open Air

Y. Ando; S. Tobe; H. Tahara; T. Yoshikawa

ITSC 2002; 112-115doi:https://doi.org/10.31399/asm.cp.itsc2002p0112

Vacuum Plasma Sprayed YSZ Electrolyte for Solid Oxide Fuel Cell Application

X.Q. Ma; F. Borit; V. Guipont; M. Jeandin

ITSC 2002; 116-121doi:https://doi.org/10.31399/asm.cp.itsc2002p0116

Nanostructured Materials

High Energy Ball Milling Prepared Al₂O₃-NiCr Dispersion Powders for Thermal Spray Coatings

E. Lugscheider; A. Fischer; M. Parco; H. Zhang

ITSC 2002; 122-126doi:https://doi.org/10.31399/asm.cp.itsc2002p0122

Nanostructured Ceramic Coatings Obtained by Thermal Spraying

L. Segers; P. Vernin; B. Hansz; C. Malavolta

ITSC 2002; 127-129doi:https://doi.org/10.31399/asm.cp.itsc2002p0127

Plasma Sprayed Nano-Structured Oxide Ceramic Coatings

Y. Zeng; S.W. Lee; C.X. Ding

ITSC 2002; 130-135doi:https://doi.org/10.31399/asm.cp.itsc2002p0130

Thermal Spraying of Iron Aluminides

Coatings of Powders Based on Iron Aluminides

A.P. Ilyuschenko; T.L. Talako; A.V. Beliaev; A.I. Letsko; B. Formanek

ITSC 2002; 136-138doi:https://doi.org/10.31399/asm.cp.itsc2002p0136

Erosion Behavior of WC_P-Fe₃Al Composite Coating Produced by High Velocity Arc Spray at Elevated Temperature

X. Binshi; M. Shining; T. Baohong; L. Xiubing

ITSC 2002; 139-143doi:https://doi.org/10.31399/asm.cp.itsc2002p0139

Toolmaking

Thermal Spray Moulding – Production of Microcomponents

J. Wilden; T. Schnick; A. Wank

ITSC 2002; 144-148doi:https://doi.org/10.31399/asm.cp.itsc2002p0144

Herstellung von Kleinserienwerkzeugen für die Blechumformung durch gespritzte Schichten in Schalenbauweise (Production of Sheet Metal Forming Tools for Short Production Runs by Thermal Sprayed Shells)

B. Aumüller; W. Schneider; K. Elsnegg; H. Krauss; W. Krömmer

ITSC 2002; 149-152doi:https://doi.org/10.31399/asm.cp.itsc2002p0149

Thermal Sprayed Coatings for Thixoforming Tools

A. Abdel-Samad; S.A. Rassoul; A. Fischer; T. Hornig; E. Lugscheider

ITSC 2002; 153-157doi:https://doi.org/10.31399/asm.cp.itsc2002p0153

Industry and Applications

Internal Plasma Spraying for New Generation of Automotive Engine

G. Barbezat

ITSC 2002; 158-160doi:https://doi.org/10.31399/asm.cp.itsc2002p0158

Die Welt des thermischen Spritzens – Anwendungsbeispiele aus der Praxis (The World of Thermal Spraying – Some Practical Applications)

M. Wewel; G. Langer; C. Wasserman

ITSC 2002; 161-164doi:https://doi.org/10.31399/asm.cp.itsc2002p0161

Influence of Additives on the Photocatalytic Properties of Plasma Sprayed TiO₂ Coatings

A. Ohmori; F.-X. Ye; C.-J. Li

ITSC 2002; 165-169doi:https://doi.org/10.31399/asm.cp.itsc2002p0165

Low Energy Arc Spraying for Applications in the Capacitor Industry

F. van Rodijnen; M. Knepper

ITSC 2002; 170-174doi:https://doi.org/10.31399/asm.cp.itsc2002p0170

Extension of Service Life of Gas Turbine Blade by Ternary TBC Coating

Y. Makida; S. Tobe; M. Ando; K. Sonoya; T. Wakabayashi

ITSC 2002; 175-179doi:https://doi.org/10.31399/asm.cp.itsc2002p0175

On the Economical and Environmental Aspects of TSA Coatings

A.J. de Munter; A. Bult; J.A. de Jong

ITSC 2002; 180-185doi:https://doi.org/10.31399/asm.cp.itsc2002p0180

Synthesis of Ceramic Layers for Solid Oxide Fuel Cells by Means of TPCVD

M. Müller; E. Bouyer; M. von Bradke; R. Henne; G. Schiller; R.B. Heimann; G. Lins

ITSC 2002; 186-192doi:https://doi.org/10.31399/asm.cp.itsc2002p0186

New Coating Solutions for Biomedical Applications

G. Langer; J. Kwo; D. Murano

ITSC 2002; 192-195doi:https://doi.org/10.31399/asm.cp.itsc2002p0192

Thermal Barrier and Ceramic Coating Processes

An Improved Deposition Process for Very Thick Porous Thermal Barrier Coatings

G.C. Gualco; E. Cordano; F. Fignino; C. Gambaro; S. Ahmaniemi; S. Tuurna; T. Mäntylä; P. Vuoristo

ITSC 2002; 196-201doi:https://doi.org/10.31399/asm.cp.itsc2002p0196

New Thermal Barrier Coating Systems with a Graded Ceramic Coating

R. Vaßen; G. Pracht; D. Stöver

ITSC 2002; 202-207doi:https://doi.org/10.31399/asm.cp.itsc2002p0202

Optimisation of the Robot Controlled Plasma Spraying of Thermal Barrier Coating for Gas Turbine Transition Duct

S. Ahmaniemi; P. Vuoristo; T. Mäntylä; J. Latokartano; I. Salonen

ITSC 2002; 208-212doi:https://doi.org/10.31399/asm.cp.itsc2002p0208

Plasma Sprayed Ceramic Coatings for Electrical Insulation on Glass Ceramic Components

R. Gadow; A. Killinger; C. Li

ITSC 2002; 213-219doi:https://doi.org/10.31399/asm.cp.itsc2002p0213

Thermally Sprayed Ceramic Coatings on Flexible Fiber Woven Fabrics

K.v. Niessen; R. Gadow

ITSC 2002; 220-224doi:https://doi.org/10.31399/asm.cp.itsc2002p0220

Plasma-Spray Deposition of Silicon Nitride-Based Coatings

D.T. Gawne; Y. Bao; T. Zhang

ITSC 2002; 225-230doi:https://doi.org/10.31399/asm.cp.itsc2002p0225

Thick Thermal Barrier Coatings Applied by Plasma Spray Processing Methods for Increased Production

C. Dambra; M. Dorfman; U. Erning; W. Mannsmann; B. Guide

ITSC 2002; 231-235doi:https://doi.org/10.31399/asm.cp.itsc2002p0231

Thermal Spray Gases

Modern Gas Supply Systems for Thermal Spraying

C. Rickfält; W. Krömmer; P. Heinrich

ITSC 2002; 236-241doi:https://doi.org/10.31399/asm.cp.itsc2002p0236

Safety Hazards Associated with the Usage of Compressed Gases in Thermal Spraying

D.L. Hale; K. Dobler; D. Gifford

ITSC 2002; 242-246doi:https://doi.org/10.31399/asm.cp.itsc2002p0242

Plasma-Sprayed Ti-6Al-4V Coatings in a Reactive Nitrogen Atmosphere up to 250 kPa

V. Guipont; R. Molins; M. Jeandin; G. Barbezat

ITSC 2002; 247-252doi:https://doi.org/10.31399/asm.cp.itsc2002p0247

Hardcoating by Welding and Laser Processing

Observation of Microstructure in Thermal Barrier Coatings Prepared by Laser Hybrid Spraying Process Using Fluorescent Dye Infiltration Technique

S.O. Chwa; A. Ohmori

ITSC 2002; 253-257doi:https://doi.org/10.31399/asm.cp.itsc2002p0253

Characterization of Laser Formed Superalloys

S.K. Mahapatra; A.S. Khanna; A. Gasser

ITSC 2002; 258-261doi:https://doi.org/10.31399/asm.cp.itsc2002p0258

Laserstrahlbeschichten mit hoher Prozessgeschwindigkeit (Laser Beam Cladding at High Processing Speed)

C. Theiler; T. Seefeld; G. Sepold

ITSC 2002; 262-267doi:https://doi.org/10.31399/asm.cp.itsc2002p0262

Verschleiß- und Korrosionsschutz bei Leichtmetallen mittels schweißtechnischer Verfahren (Wear and Corrosion Prevention for Light Metals by Means of Welding Methods)

A. Gebert; D. Wocilka; B. Bouaifi; M. Schütz

ITSC 2002; 268-272doi:https://doi.org/10.31399/asm.cp.itsc2002p0268

Mobiles Plasma-Pulver-Handauftragschweißen: Erfahrungen aus der Praxis (Mobile Plasma Powder Manual Overlay Welding: Practical Experience)

F. Schreiber

ITSC 2002; 273-277doi:https://doi.org/10.31399/asm.cp.itsc2002p0273

Plasma Transferred Arc Overlays Reduce Operating Costs in Oil Sand Processing

D. Harper; M. Gill; K.W.D. Hart; M. Anderson

ITSC 2002; 278-283doi:https://doi.org/10.31399/asm.cp.itsc2002p0278

Aufbau gerichtet erstarrter Titanaluminidstrukturen mit dem Laserstrahlbeschichten (Deposition of Epitaxially Grown Titanium Aluminide Structures by Laser Beam Cladding)

C. Theiler; T. Seefeld; G. Sepold; J. Wilden; H. Frank

ITSC 2002; 284-288doi:https://doi.org/10.31399/asm.cp.itsc2002p0284

Thermal Spraying of Tungsten Carbides and Cermets

Evaluation of Starting Material and Process Parameters for HVOF WC-10Co-4Cr Coatings

J.-G. Legoux; S. Bouaricha

ITSC 2002; 289-294doi:https://doi.org/10.31399/asm.cp.itsc2002p0289

Controlling the Degradation Phenomena During HVOF Spraying of WC-10Co-4Cr Cermet

S. Bouaricha; J.-G. Legoux

ITSC 2002; 295-299doi:https://doi.org/10.31399/asm.cp.itsc2002p0295

Structure-Wear Resistance Relationship for JP-5000 Cermet Coatings

T. Shmyreva; D. Wang

ITSC 2002; 300-305doi:https://doi.org/10.31399/asm.cp.itsc2002p0300

Hochtemperatur-Verschleißverhalten von thermisch gespritzten Hartmetallschichten für Ventilspindeln in Dampfturbinen (High-Temperature Wear Behavior of Thermally Sprayed Cemented Carbide Coatings for Valve Spindles in Steam Turbines)

P. Schneider; S. Siegmann; R. Hitzek

ITSC 2002; 306-311doi:https://doi.org/10.31399/asm.cp.itsc2002p0306

Modeling and Simulation of Substrates and Coatings

Characterization of Roughened Substrate Surface on Bond Strength of Thermal Spray Deposits

H. Fukanuma; R. Xie; N. Ohno; Y. Fujiwara; S. Kuroda

ITSC 2002; 312-317doi:https://doi.org/10.31399/asm.cp.itsc2002p0312

Simulation of Coating Profile Under Plasma Spraying Conditions

V. Hurevich; A. Gusarov; I. Smurov

ITSC 2002; 318-323doi:https://doi.org/10.31399/asm.cp.itsc2002p0318

Residual Stress Determination in Near-Net Shape Formed Specimens Obtained by Thermal Spraying

N. Markocsan; P. Fogarassy; D. Dehelean; A. Manescu; F. Rustichelli

ITSC 2002; 324-329doi:https://doi.org/10.31399/asm.cp.itsc2002p0324

High- and Low-Power Plasma Spraying Processes

Internal Powder Feed Plasma Spray and Formation of the Ceramic Coating

Y. Gao; X. Xu; Y. Kang; G. Xin

ITSC 2002; 330-334doi:https://doi.org/10.31399/asm.cp.itsc2002p0330

Investigation of the Microplasma Spraying Processes

Y. Borisov; I. Sviridova; S. Voynarovich; E. Lugscheider; A. Fischer; L. Zhao

ITSC 2002; 335-338doi:https://doi.org/10.31399/asm.cp.itsc2002p0335

High-Enthalpy Plasma Spraying

L.C. George; L. Pollard; D. Snyder; K. Young; L.B. Delcea

ITSC 2002; 339-343doi:https://doi.org/10.31399/asm.cp.itsc2002p0339

The Relationship Between Tungsten Carbide Coatings and Spray Conditions in Low-Power Plasma Spraying with Internal Powder Injection

Y. Gao; L.T. An; C. Peng; Y. Shi

ITSC 2002; 343-346doi:https://doi.org/10.31399/asm.cp.itsc2002p0343

Low-Pressure and Reactive Plasma Spraying Processes

Progress in the Area of Low Pressure Plasma Spraying

M. Loch; G. Barbezat; P. Meyer

ITSC 2002; 347-350doi:https://doi.org/10.31399/asm.cp.itsc2002p0347

On the Influence of Spraying Conditions and Powder Feed Structure on Wear Properties of Atmospheric and Vacuum Plasma Sprayed Al₂O₃-13TiO₂ Coatings

L. Leblanc; E. Kharlanova

ITSC 2002; 351-356doi:https://doi.org/10.31399/asm.cp.itsc2002p0351

Vacuum Plasma Sprayed Coatings and Freestanding Parts of Ni-Ti Shape Memory Alloys

K. Halter; S. Siegmann; B. Wielage

ITSC 2002; 357-361doi:https://doi.org/10.31399/asm.cp.itsc2002p0357

Analytical Characterization of Various Titanium Nitride Based Coatings Obtained by Reactive Plasma Spraying

M. Tului; C. Borgia; F. Casadei; E. Severini; T. Valente

ITSC 2002; 362-365doi:https://doi.org/10.31399/asm.cp.itsc2002p0362

Cold Spraying Processes

Cold Spraying – State of the Art and Applicability

T. Stoltenhoff; J. Voyer; H. Kreye

ITSC 2002; 366-375doi:https://doi.org/10.31399/asm.cp.itsc2002p0366

Equipment Engineering and Process Control for Cold Spraying

P. Richter; W. Krömmer; P. Heinrich

ITSC 2002; 375-379doi:https://doi.org/10.31399/asm.cp.itsc2002p0375

Interactions Between High-Velocity Particles and Substrates During Cold Spraying

A.N. Papyrin; V.F. Kosarev; S.V. Klinkov; A.P. Alkhimov

ITSC 2002; 380-384doi:https://doi.org/10.31399/asm.cp.itsc2002p0380

Effect of Nozzle Geometry on Cold Spray Process

K. Sakaki; N. Huruhashi; K. Tamaki; Y. Shimizu

ITSC 2002; 385-389doi:https://doi.org/10.31399/asm.cp.itsc2002p0385

Metallurgical Analysis and Preparation

A Study of the Influence of Mounting Media on Quantitative Measurements of Thermal Spray Coatings

P.A. Didier

ITSC 2002; 390-396doi:https://doi.org/10.31399/asm.cp.itsc2002p0390

Optimization of Metallographic Preparation for Thermally Sprayed Coatings using the Taguchi Method

E. Kharlanova; I. Grigore

ITSC 2002; 397-401doi:https://doi.org/10.31399/asm.cp.itsc2002p0397

Determination of the Integrity of Thermally Sprayed Coatings with a New Laterally Resolving Electrochemical Technique

M. Büchler; N. Margadant; S. Siegmann; J. Ilavsky; G. Barbezat; J. Pisacka; R. Enzl

ITSC 2002; 402-407doi:https://doi.org/10.31399/asm.cp.itsc2002p0402

Corrosion and Wear Properties

Particulate Erosion Resistance of Thermally Sprayed Coatings at Elevated Temperature

M. Yoshida; M. Yomogizawa; N. Endo

ITSC 2002; 408-414doi:https://doi.org/10.31399/asm.cp.itsc2002p0408

Tribotechnical Characteristics of Plasma Sprayed Alloyed Cast Iron-NiCrSiB Coatings

Y.A. Kharlamov; N.A. Budagyunchz; S.A. Yudichki; A.V. Shevchenko

ITSC 2002; 414-418doi:https://doi.org/10.31399/asm.cp.itsc2002p0414

Characterization of Tribological Quasicrystalline Composite Coatings

A. Román; A. Agüero; C. de Miguel; F.J. García de Blas; F. Longo; R. Muelas; A. Sánchez

ITSC 2002; 419-423doi:https://doi.org/10.31399/asm.cp.itsc2002p0419

Tribological and Corrosion Behaviour of Thermal-Sprayed Polymer-Ceramic Composite Coatings

J.M. Guilemany; D. Fernández; C. Lorenzana; J. Delgado; J.M. Miguel

ITSC 2002; 424-428doi:https://doi.org/10.31399/asm.cp.itsc2002p0424

Chlorine Corrosion of Thermally Sprayed Coatings at Elevated Temperatures

M.A. Uusitalo; P.M.J. Vuoristo; T.A. Mäntylä

ITSC 2002; 429-434doi:https://doi.org/10.31399/asm.cp.itsc2002p0429

Analytical Tools and Methods

On the Neural Network Concept to Describe the Thermal Spray Deposition Process: An Introduction

S. Guessasma; G. Montavon; C. Coddet

ITSC 2002; 435-439doi:https://doi.org/10.31399/asm.cp.itsc2002p0435

The Influence of Spray Parameters on Particle Properties

J.-E. Döring; R. Vaßen; D. Stöver

ITSC 2002; 440-445doi:https://doi.org/10.31399/asm.cp.itsc2002p0440

Analysis of the Wire Melting Behavior Depending on Wire Design and Process Characteristics

J. Wilden; B. Wielage; T. Schnick; A. Wank; P. Fronteddu

ITSC 2002; 446-449doi:https://doi.org/10.31399/asm.cp.itsc2002p0446

Einsatz der PIV-Technik zum Bestimmen des Einflusses unterschiedlicher Düsengeo- metrien auf den Lichtbogenspritzprozess (Particle Image Velocimetry (PIV) as a Tool to Investigate the Influence of Nozzle Configuration and Spray Parameters on the Arc Spray Process)

Fr.-W. Bach; T. Copitzky; G. Tegeder; J. Prehm

ITSC 2002; 450-452doi:https://doi.org/10.31399/asm.cp.itsc2002p0450

On the Neural Network Concept to Describe the Thermal Spray Deposition Process: Correlation Between In-Flight Particles Characteristics and Processing Parameters

S. Guessasma; G. Montavon; P. Gougeon; C. Coddet

ITSC 2002; 453-458doi:https://doi.org/10.31399/asm.cp.itsc2002p0453

Effect of Specific Operating Conditions on the Properties of LPPS Plasma Jets Expanding at Low Pressure

M. Gindrat; J.-L. Dorier; C. Hollenstein; M. Loch; A. Refke; A. Salito; G. Barbezat

ITSC 2002; 459-464doi:https://doi.org/10.31399/asm.cp.itsc2002p0459

High Velocity Oxy-Fuel Spraying of Superalloys

Oxygen in Atomized MCrAlY Powder and Its Effect on HVOF Coatings

M. Dunlap; G. Meng

ITSC 2002; 465-469doi:https://doi.org/10.31399/asm.cp.itsc2002p0465

Development of HVOF Sprayed NiCoCrAlYRe Coatings for use as Bond Coats of Plasma Sprayed Thermal Barrier Coatings

P. Vuoristo; S. Ahmaniemi; S. Tuurna; T. Mäntylä; E. Cordano; F. Fignino; G.C. Gualco

ITSC 2002; 470-475doi:https://doi.org/10.31399/asm.cp.itsc2002p0470

Self-Strengthening of the Adhesion of HVOF Sprayed MCrAlY Coatings

C.-J. Li; W.-Y. Li; Y. Matsunaga; K. Nakagawa

ITSC 2002; 476-482doi:https://doi.org/10.31399/asm.cp.itsc2002p0476

High Velocity Oxy-Fuel Processes

A Modified HVOF Thermal Spray System for Producing Alumina Coating

Y. Shimizu; K. Yamashita; K. Sakaki

ITSC 2002; 483-487doi:https://doi.org/10.31399/asm.cp.itsc2002p0483

Properties of Ceramic Coatings Prepared by HVOF and Plasma Spraying of Titanium Suboxide Powders

P. Vuoristo; A. Määttä; T. Mäntylä; L.-M. Berger; S. Thiele

ITSC 2002; 488-493doi:https://doi.org/10.31399/asm.cp.itsc2002p0488

Role of Spray System and Powder Feedstock on the Sliding Wear Behaviour of WC-Co HVOF Sprayed Coatings

T. Sudaprasert; D.G. McCartney; P.H. Shipway

ITSC 2002; 494-499doi:https://doi.org/10.31399/asm.cp.itsc2002p0494

An Investigation of the Corrosion Behaviour of Ni- and Co-Based Alloys Sprayed with Gas and Liquid Fuel HVOF Guns

D. Zhang; S.J. Harris; D.G. McCartney

ITSC 2002; 500-505doi:https://doi.org/10.31399/asm.cp.itsc2002p0500

Improved Corrosion Resistant Coatings Prepared Using a Modified Diamond Jet HVOF Spraying System

A.J. Sturgeon

ITSC 2002; 506-509doi:https://doi.org/10.31399/asm.cp.itsc2002p0506

Atmospheric Plasma Spraying Processes

Einfluss der Düsenkontour auf atmosphärisch DC-plasmagespritzte AL₂O₃-Schichten (Nozzle-Design Effects on the Quality of APS-Alumina Coatings)

A. Schwenk; G. Nutsch; H. Gruner

ITSC 2002; 510-513doi:https://doi.org/10.31399/asm.cp.itsc2002p0510

Entwicklung eines neuen Drei-Kathoden Plasmabrenners (Development of a New Three-Cathode Plasma Gun)

K. Nassenstein; W. Peschka

ITSC 2002; 514-515doi:https://doi.org/10.31399/asm.cp.itsc2002p0514

Hastelloy C-276 Parameter Study using the Axial III Plasma Spray System

A.W. Burgess

ITSC 2002; 516-518doi:https://doi.org/10.31399/asm.cp.itsc2002p0516

A New Process to Deposit Thin Coatings by Injecting Nanoparticle Suspensions in a dc Plasma Jet

K. Wittmann; F. Blein; J. Fazilleau; J.-F. Coudert; P. Fauchais

ITSC 2002; 519-522doi:https://doi.org/10.31399/asm.cp.itsc2002p0519

A New Technique to Plasma Spray Composite Stainless Steel-Graphite Coating with Low Friction Coefficient on 100C6 Steel

A. Harir; H. Ageorges; A. Grimaud; P. Fauchais; F. Platon

ITSC 2002; 523-528doi:https://doi.org/10.31399/asm.cp.itsc2002p0523

Emerging Thermal Spray Processes

Warm Spray: A New Promising Technology of the Coating Deposition

V.V. Sobolev; I. Fagoaga

ITSC 2002; 529-533doi:https://doi.org/10.31399/asm.cp.itsc2002p0529

Innere Zentrifugalprojektionsbeschichtung (iCPC) – ein neuartiges Beschichtungs-verfahren (Inner Centrifugal Projection Coating (iCPC) – a Novel Coating Process)

Th. Krüssel; Fr.-W. Bach; P. Stoll

ITSC 2002; 534-538doi:https://doi.org/10.31399/asm.cp.itsc2002p0534

Suspension Plasma Spraying of Ceramics by Using an Ink Jet Printer

S. Kuroda; P. Blazdell

ITSC 2002; 539-544doi:https://doi.org/10.31399/asm.cp.itsc2002p0539

Effect of Spray Parameters on the Structure of Nano-TiO₂ Deposits Produced by Liquid Flame Spraying

C.-J. Li; G.-J. Yang; Z. Wang

ITSC 2002; 544-549doi:https://doi.org/10.31399/asm.cp.itsc2002p0544

Arc Wire Spraying Processes

Effect of Nozzle Design and Atomization Gas on the Properties of Electric Arc Sprayed Ni18Cr6Al2Mn Coatings

T. Varis; E. Rajamäki

ITSC 2002; 550-552doi:https://doi.org/10.31399/asm.cp.itsc2002p0550

Corrosion Behaviour of High Velocity Combustion Wire Sprayed Coatings

M.F.O. Schiefler; J. Voyer; F. Gärtner; X. Qi

ITSC 2002; 553-558doi:https://doi.org/10.31399/asm.cp.itsc2002p0553

Wear Resistance of Arc-Sprayed Coatings from Powder Wires

V. Pokhmurskii; M. Student; V. Dovhunyk; I. Sydorak; H. Pokhmurska

ITSC 2002; 559-562doi:https://doi.org/10.31399/asm.cp.itsc2002p0559

Quality Control and Assurance

Mechanische Bruchuntersuchungen zur Ermittlung der Haftfestigkeiten von WC-Co-Schichten auf Metallsubstraten (Fracture Mechanics Testing to Determine the Adhesion Strength of WC-Co Coatings on Metal Substrates)

H. Sauer; H. Weiß; E. Kern; O. Schwabe

ITSC 2002; 563-566doi:https://doi.org/10.31399/asm.cp.itsc2002p0563

In-Situ Measurement and FEM Simulation of the Local Thermographic Heat Load on SOFC Components During Vacuum Plasma Spraying

O. Finkenwirth; S. Hoferer

ITSC 2002; 567-572doi:https://doi.org/10.31399/asm.cp.itsc2002p0567

On Line Process Control of Plasma Sprayed Ceramic Coatings with IR Thermographic Imaging

R. Gadow; A. Killinger; C. Li

ITSC 2002; 573-579doi:https://doi.org/10.31399/asm.cp.itsc2002p0573

Fast Quality Control of Spray Powders

M. Dvorak; H.G. Schmid; F. Fischer

ITSC 2002; 580-583doi:https://doi.org/10.31399/asm.cp.itsc2002p0580

Erfahrungen beim Umsetzen der neuen ISO-Normen und EWF-Ausbildungen zu Qualitätsmanagement und Personalqualifikation (Experiences in Application of the New ISO Standards and EWF Education and Training for Quality Management and Qualification of Personnel)

R. Huber; D.G.F. Böhme

ITSC 2002; 584-586doi:https://doi.org/10.31399/asm.cp.itsc2002p0584

Coating Properties—Test, Measurement, and Characterization

Developments in Laser Shock Adhesion Test (LASAT)

L. Berthe; E. Bartnicki; C. Bolis; M. Boustie; M. Arrigoni; S. Barradas; M. Jeandin; G. Barbezat; B. Dumont; Y. Desalos

ITSC 2002; 587-591doi:https://doi.org/10.31399/asm.cp.itsc2002p0587

Study of the Role of Cu-Al Intermetallics on the Adhesion of Plasma-Sprayed Copper on Aluminum using Laser Shock Adhesion Testing (LASAT)

S. Barradas; F. Borit; V. Guipont; M. Jeandin; C. Bolis; M. Boustie; L. Berthe

ITSC 2002; 592-597doi:https://doi.org/10.31399/asm.cp.itsc2002p0592

On the Elastic Mechanical Properties of Thermally Sprayed Coatings

M. Buchmann; M. Escribano; R. Gadow; G. Bürkle; M. Mahlich; H.J. Fecht

ITSC 2002; 598-605doi:https://doi.org/10.31399/asm.cp.itsc2002p0598

Residual and Applied Stresses in Thermally Sprayed Metallic and Ceramic Coatings

J. Dubský; J. Matějíček

ITSC 2002; 606-609doi:https://doi.org/10.31399/asm.cp.itsc2002p0606

Towards Fracture Mechanics of Thermally Sprayed Metallic Coatings using Indentation Technique for Edge Chipping on a Micron Scale

N. Margadant; G. Bürki; S. Siegmann

ITSC 2002; 610-616doi:https://doi.org/10.31399/asm.cp.itsc2002p0610

Study of Dielectric Properties of Plasma Sprayed Silicates at Low Voltage

P. Ctibor; J. Sedláček; K. Neufuss; J. Dubský; P. Chráska

ITSC 2002; 617-621doi:https://doi.org/10.31399/asm.cp.itsc2002p0617

Parameter Optimization of HVOF Sprayed Alumina and Effect of the Spray Parameters on the Electrical Properties of the Coatings

E. Rajamäki; T. Varis; A. Kulkarni; J. Gutleber; A. Vaidya; M. Karadge; S. Sampath; H. Herman

ITSC 2002; 622-626doi:https://doi.org/10.31399/asm.cp.itsc2002p0622

Eigenschaften von feinkristallinen Al₂O₃-SiC-Spritzschichten (characteristics of fine-crystalline Al₂O₃-SiC spray coatings)

H. Weiß; E. Kern; H. Sauer; B. Aumüller

ITSC 2002; 627-630doi:https://doi.org/10.31399/asm.cp.itsc2002p0627

Standardization in Coating Evaluation: A Universal System for Repair Coatings

J. Sauer; M. van Wonderen

ITSC 2002; 631-634doi:https://doi.org/10.31399/asm.cp.itsc2002p0631

Pre- and Post-Process Treatments

Structure and Fretting Wear Resistance of Electron Beam Remelting CoCrW Coating

X. Binshi; L. Shican; X. Xiangyang; Z. Meiling

ITSC 2002; 635-638doi:https://doi.org/10.31399/asm.cp.itsc2002p0635

Densification of Thermal Sprayed Coatings with Spark Plasma Sintering (SPS)

B. Prawara; H. Yara; Y. Miyagi; T. Fukushima

ITSC 2002; 639-643doi:https://doi.org/10.31399/asm.cp.itsc2002p0639

Spark Plasma Sintering (SPS) of Plasma Sprayed YSZ Electrolyte for Solid Oxide Fuel Cell (SOFC) Application

K.A. Khor; L.-G. Yu; S.H. Chan; X.J. Chen

ITSC 2002; 644-647doi:https://doi.org/10.31399/asm.cp.itsc2002p0644

Characterization of Thermal Barrier Coatings

Innovative Methods for the Characterization of Thermal Barrier Coatings

F. Niccolai; U. Bardi; L. Carrafiello; M. Placidi; G. Rizzi; A. Scrivani

ITSC 2002; 648-654doi:https://doi.org/10.31399/asm.cp.itsc2002p0648

Production and Characterization of Surface Preparation of Ni-base Alloy Substrates for Plasma-Sprayed Thermal Barrier Coatings

A. Scrivani; R. Groppetti; A. Rossi; F. Tedeschi; G. Rizzi; U. Bardi; F. Niccolai

ITSC 2002; 654-659doi:https://doi.org/10.31399/asm.cp.itsc2002p0654

Performance of Graded, Duplex and Triplex Thermal Barrier Coatings Exposed to Cyclic Oxidation

A. Waheed; A.H. Azzam; G. El-Awadi; A. Abdel-Sammad; E.-S.A. Rassoul

ITSC 2002; 660-665doi:https://doi.org/10.31399/asm.cp.itsc2002p0660

Effect of DC Plasma Fluctuations on In-Flight Particle Parameters – Part II

J.F. Bisson; C. Moreau

ITSC 2002; 666-671doi:https://doi.org/10.31399/asm.cp.itsc2002p0666

Surface Engineering via High Velocity Oxy-Fuel Spraying

Study and Characterization of High-Velocity Oxyfuel (HVOF) Sprayed Wear Coatings

C.R.C. Lima

ITSC 2002; 672-675doi:https://doi.org/10.31399/asm.cp.itsc2002p0672

Preparation of Powders and HVOF Sprayed Coatings for Improved Sliding Properties by Addition of Solid Lubricants

U. Männikkö; A. Määttä; P. Vuoristo; T. Mäntylä

ITSC 2002; 676-680doi:https://doi.org/10.31399/asm.cp.itsc2002p0676

Evaluation on Through-Porosity of HVOF Sprayed Coatings

J. Kawakita; S. Kuroda; T. Kodama

ITSC 2002; 681-685doi:https://doi.org/10.31399/asm.cp.itsc2002p0681

Salt Fog Corrosion Resistance of HVOF WC-10Co-4Cr Coated and Electrolytic Hard Chrome Plated AerMet 100 and 300M Steel Alloys

D. Dudzinski; P. Au; J.-G. Legoux; S. Simard

ITSC 2002; 686-691doi:https://doi.org/10.31399/asm.cp.itsc2002p0686

The Corrosion Behavior of High-Velocity Oxyfuel (HVOF) Sprayed NiCrSiB Coatings

S. Shrestha; A. Sturgeon; T. Hodgkiess; A. Neville

ITSC 2002; 692-697doi:https://doi.org/10.31399/asm.cp.itsc2002p0692

Isothermal Oxidation of Cr₃C₂-NiCr Coatings Sprayed by High Velocity Techniques

S. Matthews; M. Hyland; B. James; T. Levi

ITSC 2002; 698-704doi:https://doi.org/10.31399/asm.cp.itsc2002p0698

Development of Functionally Graded Thermal Spray Coatings for Polymer Substrates

M. Ivosevic; R. Knight; T.E. Twardowski; S.R. Kalidindi; D.Y. Kim; J.K. Sutter

ITSC 2002; 705-709doi:https://doi.org/10.31399/asm.cp.itsc2002p0705

Modeling and Simulation of Plasma Spray Processes and Laser Treatments

A Comparative Study Between Two Different Process Models of Atmospheric Plasma Spraying

A. Boussagol; P. Nylén

ITSC 2002; 710-715doi:https://doi.org/10.31399/asm.cp.itsc2002p0710

Modelling and Diagnostics of a Supersonic DC Plasma Jet Expanding at Low Pressure

B. Jodoin; M. Gindrat; J.-L. Dorier; C. Hollenstein; M. Loch; G. Barbezat

ITSC 2002; 716-720doi:https://doi.org/10.31399/asm.cp.itsc2002p0716

Laser Treatment of Thermally Sprayed Coatings

L. Pawlowski

ITSC 2002; 721-726doi:https://doi.org/10.31399/asm.cp.itsc2002p0721

Materials and Powders

Titanium Carbide-Based Powders and Coatings – Compositions, Processability and Properties

L.-M. Berger; S. Thiele; P. Vuoristo; T. Mäntylä; H. Keller; E. Proß; R. Scholl

ITSC 2002; 727-732doi:https://doi.org/10.31399/asm.cp.itsc2002p0727

AlSi-BN Abradable Materials for Aerospace Applications

S. Purdie; M.R. Dorfman; C. Britton; K. Harrison

ITSC 2002; 733-738doi:https://doi.org/10.31399/asm.cp.itsc2002p0733

Applied Industrial Research

Advanced Metal Foam Composites

M. Maurer; E. Lugscheider

ITSC 2002; 739-742doi:https://doi.org/10.31399/asm.cp.itsc2002p0739

Removal of Thermal Sprayed Layers

C.F. Redeker; Fr.-W. Bach; S. Brandt; H. Louis; R. Versemann

ITSC 2002; 743-748doi:https://doi.org/10.31399/asm.cp.itsc2002p0743

Development of SiC-Composite Feedstock for HVOF Applications

B. Wielage; J. Wilden; T. Schnick; A. Wank

ITSC 2002; 749-754doi:https://doi.org/10.31399/asm.cp.itsc2002p0749

Novel Processes and Analytical Techniques

Analytical Transmission Electron Microscopy of Phosphate Sealed Plasma Sprayed Oxide Coatings

M. Vippola; S. Ahmaniemi; P. Vuoristo; T. Lepistö; T. Mäntylä

ITSC 2002; 755-759doi:https://doi.org/10.31399/asm.cp.itsc2002p0755

Tribological Features of Self-Lubricated Coatings Obtained by Atmospheric Plasma Spraying (APS)

J.M. Guilemany; J. Navarro; C. Lorenzana; J.M. Miguel

ITSC 2002; 760-764doi:https://doi.org/10.31399/asm.cp.itsc2002p0760

Simulation of Crack Formation and Delamination of Plasma Sprayed Coating with MSC-MARC

S. Kundas; T. Kashko; V. Hurevich; E. Lugscheider; N. Papenfuß-Janzen

ITSC 2002; 765-770doi:https://doi.org/10.31399/asm.cp.itsc2002p0765

Interaction Between Near-Substrate Plasma Characteristics and Heat Flux into the Substrate by a Supersonic dc Plasma Jet of Ammonia and Nitrogen Under for Low-Pressure Nitriding

H. Tahara; K. Onoe; T. Yoshikawa; Y. Ando

ITSC 2002; 771-776doi:https://doi.org/10.31399/asm.cp.itsc2002p0771

Damage Mechanism of Functionally Graded Thermal Barrier Coatings in Thermal Cycling

M. Ohki; Y. Mutoh; M. Takahashi; T. Ishibashi

ITSC 2002; 777-781doi:https://doi.org/10.31399/asm.cp.itsc2002p0777

Investigation of Atmospheric Plasma Spray Process by In-flight Particle Pyrometry and Thermography

A. Fischer; K. Seemann; E. Lugscheider

ITSC 2002; 782-787doi:https://doi.org/10.31399/asm.cp.itsc2002p0782

Laser Processing of ZrO₂ Coatings

A.Ph. Ilyuschenko; V.A. Okovity; N.K. Tolochko; A.F. Shevtsov

ITSC 2002; 788-792doi:https://doi.org/10.31399/asm.cp.itsc2002p0788

A Novel Method for Manufacturing of Micro-Discharge Devices

T. Paul; R. Hartmann; J. Heberlein; K.H. Schoenbach; W. Shi; R. Stark

ITSC 2002; 793-796doi:https://doi.org/10.31399/asm.cp.itsc2002p0793

Laser Treatment of Flame and Plasma Sprayed Nickel Alloys

W. Żórawski; D. Gontarski; N. Radek

ITSC 2002; 797-801doi:https://doi.org/10.31399/asm.cp.itsc2002p0797

Poster Session: Equipment and Processes

Thermisch gespritzte Al-Al₂O₃-Schichten von Fülldrähten mit „self propagating high temperature synthesis” (SHS) (Thermal Sprayed Al-Al₂O₃-Coatings from Cored Wires with Self Propagating High Temperature Synthesis)

Fr.-W. Bach; T. Rothardt; Z. Babiak; B. Formanek

ITSC 2002; 802-806doi:https://doi.org/10.31399/asm.cp.itsc2002p0802

Vacuum Plasma Spraying of Thin-Film Planar Solid Oxide Fuel Cells (SOFC) – Development and Investigation of the YSZ Electrolyte Layer

M. Lang; R. Henne; S.E. Pohl; G. Schiller; E. Hubig

ITSC 2002; 807-811doi:https://doi.org/10.31399/asm.cp.itsc2002p0807

Poster Session: Case Studies

Qualifikation einer Spritzschicht aus Alumiumbronze für ein Gleitlager (Qualification of a Thermal Spray Aluminum Bronze Coating for Plain Bearings)

P. Harmathy; H. Dreger; K. Kießling; A. Volz

ITSC 2002; 813-817doi:https://doi.org/10.31399/asm.cp.itsc2002p0813

Marine Corrosion Performance of HVOF Sprayed Alloy Coatings: Comparison of Field Exposure Test and Laboratory Test

S. Kuroda; T. Fukushima; J. Kawakita; T. Kodama

ITSC 2002; 819-824doi:https://doi.org/10.31399/asm.cp.itsc2002p0819

Arc Sprayed Coatings for Industrial Applications

J. Krüger; M. Knepper

ITSC 2002; 825-829doi:https://doi.org/10.31399/asm.cp.itsc2002p0825

Effect of Substrate Temperature and Roughness on Coating Formation

N.Z. Mehdizadeh; S. Chandra; J. Mostaghimi

ITSC 2002; 830-837doi:https://doi.org/10.31399/asm.cp.itsc2002p0830

Poster Session: Coating Properties—Test, Measurement, and Characterization

Thermal Spraying of High Nitrogen Steels

L. Zhao; E. Lugscheider; A. Fischer

ITSC 2002; 838-842doi:https://doi.org/10.31399/asm.cp.itsc2002p0838

Study on Tribological Properties of Non-Skid Coating Made by Arc Spraying

M. Shining; L. Changqing; Y. Chunhai; L. Xin

ITSC 2002; 843-846doi:https://doi.org/10.31399/asm.cp.itsc2002p0843

Microstructure of FeAl Binary Alloy Coatings from Detonation Gun Spraying

G. Xin; Y. Gao; Y.G. Yan

ITSC 2002; 847-849doi:https://doi.org/10.31399/asm.cp.itsc2002p0847

Research on the Properties of NiCr-Based Cermet Coatings for Boiler Tube Protection

Z. Ding; C. Lu; B. Huang; W. Zhan

ITSC 2002; 850-854doi:https://doi.org/10.31399/asm.cp.itsc2002p0850

Relationship Between Splat Morphology and Cohesion-Adhesion Strength of Coatings

S. Oki

ITSC 2002; 855-857doi:https://doi.org/10.31399/asm.cp.itsc2002p0855

Microstructure Investigation of HVOF Sprayed WC-Co Coatings

E. Colin; M. Leaute; T. Roger; A. Le Maguer; L. Pawlowski; J.-P. Janssen

ITSC 2002; 858-862doi:https://doi.org/10.31399/asm.cp.itsc2002p0858

Tribological Properties of Carbide Coatings by Plasma and HVOF Spraying

W. Żórawski

ITSC 2002; 863-866doi:https://doi.org/10.31399/asm.cp.itsc2002p0863

Auffüllen von Defekten und Verbinden durch thermisches Spritzen (Filling of Defects and Bonding via Thermal Spraying)

Fr.-W. Bach; Z. Babiak; G. Tegeder

ITSC 2002; 867-872doi:https://doi.org/10.31399/asm.cp.itsc2002p0867

Effect of Powder Size on the Oxidation of MCrAlY Particles During HVOF Spraying

C.-J. Li; W.-Y. Li

ITSC 2002; 873-878doi:https://doi.org/10.31399/asm.cp.itsc2002p0873

The Influence of the Microstructure of Thermal Barrier Coating Systems on Sintering and Other Properties

R. Vaßen; M. Ahrens; A.F. Waheed; D. Stöver

ITSC 2002; 879-883doi:https://doi.org/10.31399/asm.cp.itsc2002p0879

A Study of the Microstructure, Wear, and Corrosion Behavior of HVOF Layers and Self-Standing Forms Obtained with Blends of Cr₃C₂-NiCr-NiCrBSi

J.M. Guilemany; C. Lorenzana; J.M. Miguel; J. Delgado

ITSC 2002; 884-889doi:https://doi.org/10.31399/asm.cp.itsc2002p0884

Structural Characterization of Plasma Sprayed and Spray-and-Fused NiCrBSi Coatings

J.M. Guilemany; J.M. Miguel; S. Vizcaino; S. Armada

ITSC 2002; 890-893doi:https://doi.org/10.31399/asm.cp.itsc2002p0890

Drawbacks in Corrosion Resistance of Thermal Spray Coatings in Aggressive Aqueous Media

J.M. Guilemany; J. Fernández; J. Delgado; A.V. Benedetti

ITSC 2002; 894-899doi:https://doi.org/10.31399/asm.cp.itsc2002p0894

Improvement of Interface Bond Strength Between Ceramic Thermal Barrier Coatings and Metallic Bond Coatings

K. Ogawa; T. Kato; T. Shoji

ITSC 2002; 900-904doi:https://doi.org/10.31399/asm.cp.itsc2002p0900

Structure and Tribological Characteristics of HVOF Coatings Sprayed from Powder Blends of Cr₃C₂-25NiCr and Metallic Alloys

A. Määttä; U. Männikkö; P. Vuoristo; T. Mäntylä; K. Laitinen

ITSC 2002; 905-907doi:https://doi.org/10.31399/asm.cp.itsc2002p0905

Thermogravimetric Analysis for Aluminum Phosphate Sealed Alumina and Chromia Coatings

M. Vippola; J. Vuorinen; P. Vuoristo; T. Lepistö; T. Mäntylä

ITSC 2002; 908-911doi:https://doi.org/10.31399/asm.cp.itsc2002p0908

Correlation of In-Flight Particle Properties and Layer Structure in HVOF Spraying

T. Fukushima; H. Yamada; J. Kawakita; S. Kuroda

ITSC 2002; 912-917doi:https://doi.org/10.31399/asm.cp.itsc2002p0912

Effect of Flow Regime on Particle Velocity in the HVOF Process

A. Dolatabadi; V. Pershin; J. Mostaghimi

ITSC 2002; 918-925doi:https://doi.org/10.31399/asm.cp.itsc2002p0918

A Comparison of Elevated Temperature Erosion Resistance of Several Carbide Cermet Coatings

B.Q. Wang

ITSC 2002; 926-929doi:https://doi.org/10.31399/asm.cp.itsc2002p0926

Wear Behavior of Hot Isostatically Pressed Thermal Spray Coatings

V. Stoica; R. Ahmed; S. Tobe

ITSC 2002; 930-937doi:https://doi.org/10.31399/asm.cp.itsc2002p0930

Influence of Nozzle Design on the Structure of a Plasma Jet Under Vacuum Conditions

R. Bolot; D. Klein; C. Coddet

ITSC 2002; 938-943doi:https://doi.org/10.31399/asm.cp.itsc2002p0938

Influence of TiO₂ Content on the Behavior of Al₂O₃ Layers Under Cyclic Tribological Loads

S. Costil; B. Normand; C. Coddet; C. Langlade-Bomba; A.B. Vannes

ITSC 2002; 944-948doi:https://doi.org/10.31399/asm.cp.itsc2002p0944

Fractal Dimension as an Indicator of Thermal Spray Coating Roughness

S. Guessasma; G. Montavon; C. Coddet; C. Mancini; C.C. Berndt

ITSC 2002; 949-953doi:https://doi.org/10.31399/asm.cp.itsc2002p0949

Relationships between In-Flight Particle Characteristics and Coating Microstructure for the Twin Wire Arc Spray Process

G. Jandin; M.P. Planche; H. Liao; C. Coddet

ITSC 2002; 954-959doi:https://doi.org/10.31399/asm.cp.itsc2002p0954

Development of a Vacuum Plasma Sprayed Ceramic Coating for Electrostatic Chucks used in Semiconductor Manufacturing

J. Takeuchi; R. Yamasaki; Y. Harada

ITSC 2002; 960-964doi:https://doi.org/10.31399/asm.cp.itsc2002p0960

Poster Session: Process Modeling and Simulation

Bonding Mechanisms of HVOF Sprayed Coatings

C.-J. Li; Y.-Y. Wang

ITSC 2002; 965-971doi:https://doi.org/10.31399/asm.cp.itsc2002p0965

Numerical Simulation of Offset Deposition for Sequential Tin Droplets

R. Ghafouri-Azar; S. Shakeri; S. Chandra; J. Mostaghimi

ITSC 2002; 972-978doi:https://doi.org/10.31399/asm.cp.itsc2002p0972

3D Modeling of Substrate Temperature During Layer Build-up

R. Bolot; M. Imbert; C. Coddet

ITSC 2002; 979-984doi:https://doi.org/10.31399/asm.cp.itsc2002p0979

Poster Session: Plasma Transferred Arc Surfacing

Microstructure and Wear Behavior of Cobalt-base PTA Layers Tested in a Molten Zn-Al Bath

H.-J. Kim; B.-H. Yoon

ITSC 2002; 985-990doi:https://doi.org/10.31399/asm.cp.itsc2002p0985

Plasma-Pulver-Auftragschweißen von Messern für die Lebensmittelindustrie (PTA Powder Cladding of Knives for Food Processing Industry)

A. Gebert; H. Heinze

ITSC 2002; 991-993doi:https://doi.org/10.31399/asm.cp.itsc2002p0991

Poster Session: Process Diagnostics

Effect of System Design on the Characteristics of Thermal Radiation Signals in the Simultaneous Measurement of Spray Particle Parameters

C.-J. Li; T. Wu; C.-X. Li

ITSC 2002; 994-1000doi:https://doi.org/10.31399/asm.cp.itsc2002p0994

Digital Diagnostics Based on CCD Imaging for Monitoring Thermal Spray Processes

M. Ignatiev; V. Senchenko; V. Dozhdikov; I. Smurov; P. Bertrand

ITSC 2002; 1001-1006doi:https://doi.org/10.31399/asm.cp.itsc2002p1001

Influence of Noise Factors on Atmospheric Plasma Spraying

K. Seemann; A. Fischer; E. Lugscheider

ITSC 2002; 1007-1010doi:https://doi.org/10.31399/asm.cp.itsc2002p1007

Poster Session: Quality Control and Assurance

Capability of Emission Spectroscopy for Quality Assurance in Thermal Spraying

J. Wilden; H. Sachs; A. Wank

ITSC 2002; 1011-1015doi:https://doi.org/10.31399/asm.cp.itsc2002p1011

Poster Session: Pre- and Post-Process Treatments

Investigation of the Adhesion Mechanism between Metal Substrates and Thermally Sprayed Ceramic Coatings

B. Wielage; S. Steinhäuser; W. Milewski; H. Pokhmurska

ITSC 2002; 1016-1019doi:https://doi.org/10.31399/asm.cp.itsc2002p1016

Solidification of Detonation Sprayed Ceramic Coating Melted by CO₂ Laser

B. Wielage; S. Steinhäuser; W. Milewski; H. Pokhmurska

ITSC 2002; 1020-1023doi:https://doi.org/10.31399/asm.cp.itsc2002p1020

Spark Plasma Sintering of Plasma Sprayed HA Coatings

K.A. Khor; L.G. Yu; P. Cheang

ITSC 2002; 1024-1028doi:https://doi.org/10.31399/asm.cp.itsc2002p1024

Poster Session: Influence of Gases and Powders

Investigation of Composite Powders with Hard Lubricant Components for Thermal Spraying of Coatings

A. Ilyuschenko; A. Shevtsov; T. Azarova; V. Okovity; V. Smurov; M. Ignatiev; E. Kovalion

ITSC 2002; 1029-1032doi:https://doi.org/10.31399/asm.cp.itsc2002p1029

Performance of HVOF Nanostructured Titanium Diboride Composite Coatings

J. Wilden; T. Schnick; A. Wank; F. Schreiber

ITSC 2002; 1033-1037doi:https://doi.org/10.31399/asm.cp.itsc2002p1033

Influence of Plasma Gas Composition on Coating Properties Produced by Atmospheric Plasma Spraying

T. Duda; T. Rothardt; Z. Babiak; M. Mendelsohn

ITSC 2002; 1038-1041doi:https://doi.org/10.31399/asm.cp.itsc2002p1038

Influence of Atomization Gas on Nitriding Process Under Ti Arc Spraying

N. Sakoda; M. Hida; Y. Sakakibara; T. Tajiri

ITSC 2002; 1042-1046doi:https://doi.org/10.31399/asm.cp.itsc2002p1042

Mechanically Alloyed SiC Composite Powders for HVOF Applications

B. Wielage; J. Wilden; T. Schnick; A. Wank; J. Beczkowiak; R. Schülein; H. Zoz; H. Ren

ITSC 2002; 1047-1051doi:https://doi.org/10.31399/asm.cp.itsc2002p1047

Volume Information

Impressum (Organizing Committees)

ITSC 2002; iidoi:https://doi.org/10.31399/asm.cp.itsc2002fm01

Vorwort (Preface)

ITSC 2002; iii-ivdoi:https://doi.org/10.31399/asm.cp.itsc2002fm02

List of authors

ITSC 2002; v-xivdoi:https://doi.org/10.31399/asm.cp.itsc2002fm03