Abstract Semiconductor devices are sensitive to contamination that can cause product defects and product rejects. There are many possible types and sources of contamination. Root cause resolution of the contamination source can improve yield. The purpose of contamination troubleshooting is to identify and eliminate major yield limiters. This requires the use of a variety of analytical techniques[1]. Most important, it requires an understanding of the principle of contamination troubleshooting and general knowledge of analytical tests. This paper describes a contamination troubleshooting approach with case studies as examples of its application.

Abstract This paper introduces our effort in failure analysis of a 200 nm thick metal interconnection on a glass substrate and covered with a passivation layer. Structural damage in localized areas of the metal interconnections was observed with the aid of focused ion beam (FIB) cross-sectioning. Laser ablation inductively coupled plasma mass spectroscopy (LA ICP-MS) was then applied to the problematic areas on the interconnection for chemical survey. LA ICP-MS showed direct evidence of localized chemical contamination, which has likely led to corrosion (or over-etching) of the metal interconnection and the assembly failure. Due to the high detection sensitivity of LA ICP-MS and its compatibility with insulating material analysis, minimal sample preparation is required. As a result, the combination of FIB and LA ICP-MS enabled successful meso-scale failure analysis with fast turnaround and reasonable cost.