Abstract
Effective heat treatment is essential for optimizing the properties of steels in various applications. Understanding the evolution of steel microstructure during intrinsic or post-heat treatment, along with managing distortions and residual stresses, is crucial for ensuring component usability. In laser-based additive manufacturing, high temperature gradients and cooling rates induce residual stresses, impacting the heat-affected zones. However, there remains a gap in understanding how stress influences precipitation during heat treatment, particularly regarding transformation-induced plasticity (TRIP), where a stress triggers deformation during phase transformation. This study aims to investigate TRIP effects during the aging of maraging steels, commonly employed in laser-based powder bed fusion. During the experiments, the steels were continuously aged under varying compression stresses. By isolating TRIP strain from total strain, the study establishes a relationship between maximum TRIP strain after phase transformation and applied stress, defining specific TRIP constants for each steel. The presence of TRIP strain has been confirmed during short time continuous aging treatments, indicating its significance even in the initial stages of the heat treatment process. While the applied stress level does not affect hardness, significant differences in maximum hardness values after aging were observed among the investigated materials. Furthermore, a comparative analysis of different maraging steels revealed a positive correlation between the TRIP constant and the amount of precipitation, and consequently, hardness. These findings confirm the role of TRIP in precipitate formation in maraging steels and provide a foundation for further understanding and predicting post-heat treatment material states.
