Abstract
Austempering heat treatments of steels and cast irons are usually performed using salt bath quenching followed by isothermal transformation of austenite to bainite or ausferrite. High Pressure Gas Quenching (HPGQ) at 1-4 MPa gas pressures is increasingly used to replace oil quenching, but may also be used for austempering. However, to obtain sufficient heat transfer high gas speeds >25 m/s are required. Hot Isostatic Pressing (HIP) is widely used for densifying castings and powder-based materials. Recent equipment developments enable Uniform Rapid Quenching (URQ) under 200 MPa pressure and 0.3 m/s speed, providing uniform cooling. Superplastic conditions during austenitization and initially during URQ reduce residual stresses and eliminate internal porosity in castings and PM materials. Hardenability is increased due to stabilization of the close-packed austenite. The inherent freedom provided by HIP to select optimum levels and rates for temperatures and pressures has been shown to improve mechanical properties and reduce process duration.
