Volumes | Heat Treating Conference Proceedings | ASM International

Skip to Main Content

Skip Nav Destination

Heat Treat 2017: Proceedings from the 29th Heat Treating Society Conference and Exposition

Additive Manufacturing/3D Processing

High Pressure Heat Treatment—Optimized Material Properties by HIP

Johan Hjarne; Magnus Ahlfors; Anders Eklund

heat-treating 2017; 1-3https://doi.org/10.31399/asm.cp.ht2017p0001

View Articletitled, High Pressure Heat Treatment—Optimized Material Properties by HIP

Heat Treatment of IN 718 Produced by Laser Powder Bed Fusion Process—Effect of Thickness on the Microstructure Characteristics

Alber Sadek; Ray Xu; Rajiv S. Mishra

heat-treating 2017; 4-11https://doi.org/10.31399/asm.cp.ht2017p0004

View Articletitled, Heat Treatment of IN 718 Produced by Laser Powder Bed Fusion Process—Effect of Thickness on the Microstructure Characteristics

Advances in Heat Treating

Applicability of Modified T5 Temper for Aluminum Forged Parts

Ömer Sürmen; Mehmet Tarakçı; Yücel Gençer; Sakin Zeytin

heat-treating 2017; 12-18https://doi.org/10.31399/asm.cp.ht2017p0012

View Articletitled, Applicability of Modified T5 Temper for Aluminum Forged Parts

On Predicting Quenched and Tempered Hardness of Mixed Microstructures using Steel Chemistry

Viraj A. Athavale; David C. Van Aken

heat-treating 2017; 19-26https://doi.org/10.31399/asm.cp.ht2017p0019

View Articletitled, On Predicting Quenched and Tempered Hardness of Mixed Microstructures using Steel Chemistry

Developing Aluminized Coatings on Stainless Steels by Hot Dipping

Farzaneh Farhadi; Carl Soderhjelm; Richard D. Sisson

heat-treating 2017; 27-32https://doi.org/10.31399/asm.cp.ht2017p0027

View Articletitled, Developing Aluminized Coatings on Stainless Steels by Hot Dipping

Impact of Various Heat Treatments on the Microstructure Evolution and Mechanical Properties of Hot Forged 18CrNiMo7-6 Steel

Paranjayee Mandal; Abdullah Al Mamun; Laurie Da Silva; Himanshu Lalvani; Marcos Perez; Lisa Muir

heat-treating 2017; 33-38https://doi.org/10.31399/asm.cp.ht2017p0033

View Articletitled, Impact of Various Heat Treatments on the Microstructure Evolution and Mechanical Properties of Hot Forged 18CrNiMo7-6 Steel

The Use of Low Pressure Carburizing and High Pressure Gas Quenching for In-Line Heat Treat Processing

Dennis Beauchesne

heat-treating 2017; 39-43https://doi.org/10.31399/asm.cp.ht2017p0039

View Articletitled, The Use of Low Pressure Carburizing and High Pressure Gas Quenching for In-Line Heat Treat Processing

Low Drift Type K and N Mineral Insulated Thermocouple Cable for Aerospace Applications

Trevor D Ford; Michele Scervini

heat-treating 2017; 44-53https://doi.org/10.31399/asm.cp.ht2017p0044

View Articletitled, Low Drift Type K and N Mineral Insulated Thermocouple Cable for Aerospace Applications

Everything Matters to Reach ASM HTS’s Vision 2020 Goals

Joseph A. Powell

heat-treating 2017; 54-64https://doi.org/10.31399/asm.cp.ht2017p0054

View Articletitled, Everything Matters to Reach ASM HTS’s Vision 2020 Goals

Induction Heating Nonferrous Metals—Physical Characteristics and Process Optimization

Collin Russell; Yulia Pleshivtseva

heat-treating 2017; 65-69https://doi.org/10.31399/asm.cp.ht2017p0065

View Articletitled, Induction Heating Nonferrous Metals—Physical Characteristics and Process Optimization

Applied Technology

RSM Optimization of Laser Processing Parameters to Improve Biowettability of Ti-6Al-4V Alloys

Ashwin Kumar

heat-treating 2017; 70-77https://doi.org/10.31399/asm.cp.ht2017p0070

View Articletitled, RSM Optimization of Laser Processing Parameters to Improve Biowettability of Ti-6Al-4V Alloys

Heat Treatment with a Turbulent Twist

Akin Malas

heat-treating 2017; 78-81https://doi.org/10.31399/asm.cp.ht2017p0078

View Articletitled, Heat Treatment with a Turbulent Twist

The State of the Art in Heat Treat Simulation

Greg Petrus; James Miller; John Walters; Ravi Shankar

heat-treating 2017; 82-86https://doi.org/10.31399/asm.cp.ht2017p0082

View Articletitled, The State of the Art in Heat Treat Simulation

Process Prediction and Control by an Empirical Model Based on Equivalent Diffusion for Carburizing or Carbonitriding Processes

R. W. Simons

heat-treating 2017; 87-90https://doi.org/10.31399/asm.cp.ht2017p0087

View Articletitled, Process Prediction and Control by an Empirical Model Based on Equivalent Diffusion for Carburizing or Carbonitriding Processes

Hydrogen Generation Makes Switching from Dissociated Ammonia Attractive

David E. Wolff

heat-treating 2017; 91-98https://doi.org/10.31399/asm.cp.ht2017p0091

View Articletitled, Hydrogen Generation Makes Switching from Dissociated Ammonia Attractive

Nikrothal PM 58 and Kanthal APMT – Alumina Forming High Temperature Steels Offering New Opportunities in Heat Treatment

Dilip Chandrasekaran; Thomas Helander; Johanna Nockert Olovsjö

heat-treating 2017; 99-105https://doi.org/10.31399/asm.cp.ht2017p0099

View Articletitled, Nikrothal PM 58 and Kanthal APMT – Alumina Forming High Temperature Steels Offering New Opportunities in Heat Treatment

3D Multiphysics Modelling Applied to Parametric Analysis on Inductors Design

D. Ciscato; M. Cesano

heat-treating 2017; 106-111https://doi.org/10.31399/asm.cp.ht2017p0106

View Articletitled, 3D Multiphysics Modelling Applied to Parametric Analysis on Inductors Design

Key Considerations When Planning to Upgrade Existing Vacuum Furnaces

Pete Kerbel

heat-treating 2017; 112-117https://doi.org/10.31399/asm.cp.ht2017p0112

View Articletitled, Key Considerations When Planning to Upgrade Existing Vacuum Furnaces

FNC and Post-Oxidation—Comparisons of Corrosion Resistance Performance

Jim Oakes; Chuck Thomas

heat-treating 2017; 118-125https://doi.org/10.31399/asm.cp.ht2017p0118

View Articletitled, FNC and Post-Oxidation—Comparisons of Corrosion Resistance Performance

Aqueous Quenchants for Induction Hardening

Chuck Faulkner

heat-treating 2017; 126-128https://doi.org/10.31399/asm.cp.ht2017p0126

View Articletitled, Aqueous Quenchants for Induction Hardening

Solving Critical Heat Treatment Challenges with Practical Process Modeling

J. Sims; T. Yu; Z. Charlie Li; B. L. Ferguson

heat-treating 2017; 129-137https://doi.org/10.31399/asm.cp.ht2017p0129

View Articletitled, Solving Critical Heat Treatment Challenges with Practical Process Modeling

Considerations for Induction Quench and Temper of Tubular Products with Upset Ends—A Case Study of API 5CT L80 and P110 Casing and Tubing

Olexandra Tupalo; Mike Abbas; Lesley D. Frame

heat-treating 2017; 138-145https://doi.org/10.31399/asm.cp.ht2017p0138

View Articletitled, Considerations for Induction Quench and Temper of Tubular Products with Upset Ends—A Case Study of API 5CT L80 and P110 Casing and Tubing

Atmosphere Technology

Improved Reliability of Dew Point Measurements of Furnace Atmosphere on a Continuous Basis

Liang He; Donald Bowe; Philips Thomas; Ranajit Ghosh

heat-treating 2017; 146-148https://doi.org/10.31399/asm.cp.ht2017p0146

View Articletitled, Improved Reliability of Dew Point Measurements of Furnace Atmosphere on a Continuous Basis

Endothermic Generator Advanced Diagnostics

Alex D. Kominek

heat-treating 2017; 149-152https://doi.org/10.31399/asm.cp.ht2017p0149

View Articletitled, Endothermic Generator Advanced Diagnostics

A Troubleshooting Guide for Brazing Furnace Atmospheres

Thomas Philips; Liang He; Ranajit Ghosh

heat-treating 2017; 153-156https://doi.org/10.31399/asm.cp.ht2017p0153

View Articletitled, A Troubleshooting Guide for Brazing Furnace Atmospheres

Metallurgical Sample Preparation Study for Compound Layer Examination in Nitrided Components

Olga K. Rowan; Zachary S. Birky

heat-treating 2017; 157-162https://doi.org/10.31399/asm.cp.ht2017p0157

View Articletitled, Metallurgical Sample Preparation Study for Compound Layer Examination in Nitrided Components

Automotive Lightweighting

Flash Bainite—Room Temp Stamping 1500 to 1800 MPa Structural and Energy Absorbing Components to <2T Bend Radii

Gary M. Cola

heat-treating 2017; 163-171https://doi.org/10.31399/asm.cp.ht2017p0163

View Articletitled, Flash Bainite—Room Temp Stamping 1500 to 1800 MPa Structural and Energy Absorbing Components to <2T Bend Radii

Role of Thermal Processing in Tailored Forming Technology for Manufacturing Multimaterial Components

Robert Goldstein; Bernd-Arno Behrens; Deniz Duran

heat-treating 2017; 172-179https://doi.org/10.31399/asm.cp.ht2017p0172

View Articletitled, Role of Thermal Processing in Tailored Forming Technology for Manufacturing Multimaterial Components

Automotive Designers and Heat Treaters Have Choices—Pros and Cons of Competing Hardening Processes and Materials

Wallace Tittus; Michal Neumann

heat-treating 2017; 180-184https://doi.org/10.31399/asm.cp.ht2017p0180

View Articletitled, Automotive Designers and Heat Treaters Have Choices—Pros and Cons of Competing Hardening Processes and Materials

Development of Ausferritic Microstructure in a Medium Carbon Steel

Mohamed Alshwigi; Susil K. Putatunda

heat-treating 2017; 185-189https://doi.org/10.31399/asm.cp.ht2017p0185

View Articletitled, Development of Ausferritic Microstructure in a Medium Carbon Steel

Induction Heat Treating

Modeling Short Time Dilatometry Testing of High Carbon Steels

Robert Goldstein; Ethan Buchner; Robert Cryderman

heat-treating 2017; 190-196https://doi.org/10.31399/asm.cp.ht2017p0190

View Articletitled, Modeling Short Time Dilatometry Testing of High Carbon Steels

Induction Hardening Inductors and Process Development

Sandra J. Midea; David Lynch

heat-treating 2017; 197-200https://doi.org/10.31399/asm.cp.ht2017p0197

View Articletitled, Induction Hardening Inductors and Process Development

Influence of Vanadium Microalloying on the Microstructure of Induction Hardened 1045 Steel Shafts

Lee Rothleutner; Chester Van Tyne; Robert Goldstein

heat-treating 2017; 201-210https://doi.org/10.31399/asm.cp.ht2017p0201

View Articletitled, Influence of Vanadium Microalloying on the Microstructure of Induction Hardened 1045 Steel Shafts

Microstructure and Notched Fracture Resistance of 0.56% C Steels After Simulated Induction Hardening

Robert Cryderman; John Speer

heat-treating 2017; 211-218https://doi.org/10.31399/asm.cp.ht2017p0211

View Articletitled, Microstructure and Notched Fracture Resistance of 0.56% C Steels After Simulated Induction Hardening

A Novel Integrated Tool for Parametric Geometry Generation and Simulation for Induction Hardening of Gears

Luigino Capone; Thomas Petzold; Dietmar Hoemberg; Dmitry Ivanov

heat-treating 2017; 219-227https://doi.org/10.31399/asm.cp.ht2017p0219

View Articletitled, A Novel Integrated Tool for Parametric Geometry Generation and Simulation for Induction Hardening of Gears

New Technology Advancing Induction Heat Treatment Quality, Flexibility, and Performance

Collin A. Russell; Michael J. Zaharof

heat-treating 2017; 228-231https://doi.org/10.31399/asm.cp.ht2017p0228

View Articletitled, New Technology Advancing Induction Heat Treatment Quality, Flexibility, and Performance

Computer Simulation of Single-Shot Induction Hardening Processes

Collin A. Russell; Valery Rudnev; Zhichao Li; B. Lynn Ferguson

heat-treating 2017; 232-235https://doi.org/10.31399/asm.cp.ht2017p0232

View Articletitled, Computer Simulation of Single-Shot Induction Hardening Processes

Inductors and Coils New Production Solutions using Additive Manufacturing such as EBM 3D Printing and Precision Casting—A Presentation of the Current State-of-the-Art Technologies

Fabien Marquis

heat-treating 2017; 236-241https://doi.org/10.31399/asm.cp.ht2017p0236

View Articletitled, Inductors and Coils New Production Solutions using Additive Manufacturing such as EBM 3D Printing and Precision Casting—A Presentation of the Current State-of-the-Art Technologies

Induction Hardening for Large Bearing Rings—Case Study and Process Optimization

Daniel Munteanu; Tibor Bedo; Daniel Cristea; Camelia Gabor; Mihai Alin Pop; Ioan Milosan; Sorin Ioan Munteanu

heat-treating 2017; 242-249https://doi.org/10.31399/asm.cp.ht2017p0242

View Articletitled, Induction Hardening for Large Bearing Rings—Case Study and Process Optimization

Successful Application of Intensive Quenching, Including the Elimination of Carburizing

Edward Rylicki

heat-treating 2017; 250-254https://doi.org/10.31399/asm.cp.ht2017p0250

View Articletitled, Successful Application of Intensive Quenching, Including the Elimination of Carburizing

A New Standard Guide for Induction Heat Treating – Explanation of ASTM A1100

Lesley D. Frame

heat-treating 2017; 255-257https://doi.org/10.31399/asm.cp.ht2017p0255

View Articletitled, A New Standard Guide for Induction Heat Treating – Explanation of ASTM A1100

Metallurgical Case Studies of Induction Hardening

Sandra J. Midea

heat-treating 2017; 258-263https://doi.org/10.31399/asm.cp.ht2017p0258

View Articletitled, Metallurgical Case Studies of Induction Hardening

Understanding the Induction Hardening Circuit

William I. Stuehr

heat-treating 2017; 264-269https://doi.org/10.31399/asm.cp.ht2017p0264

View Articletitled, Understanding the Induction Hardening Circuit

Internet of Things

Big Data for Heat Treatment — How Data Analytics Can Contribute to Heat Treating Operations

Lesley D. Frame; Brian Vo; Omar Abuzaghleh

heat-treating 2017; 270-273https://doi.org/10.31399/asm.cp.ht2017p0270

View Articletitled, Big Data for Heat Treatment — How Data Analytics Can Contribute to Heat Treating Operations

Achieving Production Flexibility With Automated Multicell Systems

Janusz Kowalewski

heat-treating 2017; 274-279https://doi.org/10.31399/asm.cp.ht2017p0274

View Articletitled, Achieving Production Flexibility With Automated Multicell Systems

Empowered Heat Treat Operators—Using Mobility and Data Analytics to Make Operators More Productive

Peter Sherwin

heat-treating 2017; 280-283https://doi.org/10.31399/asm.cp.ht2017p0280

View Articletitled, Empowered Heat Treat Operators—Using Mobility and Data Analytics to Make Operators More Productive

Software Solutions for Streamlining Furnace Compliance

Nathan K. Wright

heat-treating 2017; 284-287https://doi.org/10.31399/asm.cp.ht2017p0284

View Articletitled, Software Solutions for Streamlining Furnace Compliance

Microstructure Development

Influence of Test Method and Microalloy Additions on Measured Austenite Grain Size of Heat Treated SAE 1045 Steel

Robert Cryderman; Dane Hyer-Petersen; Robert Glodowski

heat-treating 2017; 288-296https://doi.org/10.31399/asm.cp.ht2017p0288

View Articletitled, Influence of Test Method and Microalloy Additions on Measured Austenite Grain Size of Heat Treated SAE 1045 Steel

Development of 0.2%C Low Alloyed Steel Hardened by Copper Precipitation

Jaromir Dlouhy; Jozef Zrnik

heat-treating 2017; 297-301https://doi.org/10.31399/asm.cp.ht2017p0297

View Articletitled, Development of 0.2%C Low Alloyed Steel Hardened by Copper Precipitation

Solidification and Homogenization Modeling of High Entropy Alloys

Adam T. Hope; Hai-Lin Chen; João Pedro Oliveira; Carolin Fink

heat-treating 2017; 302-304https://doi.org/10.31399/asm.cp.ht2017p0302

View Articletitled, Solidification and Homogenization Modeling of High Entropy Alloys

The Effects of Heating Rates on the Tempering of 4140 Steel

Xiaoqing Cai; Richard Sisson; Lesley D. Frame

heat-treating 2017; 305-310https://doi.org/10.31399/asm.cp.ht2017p0305

View Articletitled, The Effects of Heating Rates on the Tempering of 4140 Steel

Life Extension of High-Temperature Structural Alloys RA602CA in Gas Carburizing Atmosphere

Anbo Wang; Haixuan Yu; R. D. Sisson

heat-treating 2017; 311-320https://doi.org/10.31399/asm.cp.ht2017p0311

View Articletitled, Life Extension of High-Temperature Structural Alloys RA602CA in Gas Carburizing Atmosphere

Processes and Applications

Effects of Forming Route and Heat Treatment on the Distortion Behavior of Case-Hardened Martensitic Steel type S156

David Easton; Marcos Perez; Jianglin Huang; Salaheddin Rahimi

heat-treating 2017; 321-330https://doi.org/10.31399/asm.cp.ht2017p0321

View Articletitled, Effects of Forming Route and Heat Treatment on the Distortion Behavior of Case-Hardened Martensitic Steel type S156

Advancements in Control and Data Management for Heat Treatment

Steve Miller

heat-treating 2017; 331-334https://doi.org/10.31399/asm.cp.ht2017p0331

View Articletitled, Advancements in Control and Data Management for Heat Treatment

A Match of Material and Process—A Slip for Downhole Isolation Tools Made of a Cast Iron by Surface Hardening Treatments

Xiangtong Yang; Hongtao Liu; Lei Wang; Jianhui Xu; Yu Liu

heat-treating 2017; 335-340https://doi.org/10.31399/asm.cp.ht2017p0335

View Articletitled, A Match of Material and Process—A Slip for Downhole Isolation Tools Made of a Cast Iron by Surface Hardening Treatments

Achieving Uniformity through Burner Spacing, Arrangement and Emerging Combustion Technology

Michael Cochran; Scott Brown

heat-treating 2017; 341-349https://doi.org/10.31399/asm.cp.ht2017p0341

View Articletitled, Achieving Uniformity through Burner Spacing, Arrangement and Emerging Combustion Technology

Sources of Distortion During Quench Hardening Studied Using Computer Modeling

Zhichao Li; B. Lynn Ferguson; Justin Sims; Tianyu Yu

heat-treating 2017; 350-356https://doi.org/10.31399/asm.cp.ht2017p0350

View Articletitled, Sources of Distortion During Quench Hardening Studied Using Computer Modeling

Test Piece Representation of Carburized Gear Heat Treatment

Michael A. Pershing; Mohammed Maniruzzaman

heat-treating 2017; 357-362https://doi.org/10.31399/asm.cp.ht2017p0357

View Articletitled, Test Piece Representation of Carburized Gear Heat Treatment

Preventing Plant/Process Shutdowns Related to Momentary Short Circuits in Heat Treat Furnaces

Thomas Bako

heat-treating 2017; 363-366https://doi.org/10.31399/asm.cp.ht2017p0363

View Articletitled, Preventing Plant/Process Shutdowns Related to Momentary Short Circuits in Heat Treat Furnaces

Comparison of Various Methods for Specifying and Determining the Case Depth of Nitrided Components

Zachary Birky; Olga Rowan

heat-treating 2017; 367-373https://doi.org/10.31399/asm.cp.ht2017p0367

View Articletitled, Comparison of Various Methods for Specifying and Determining the Case Depth of Nitrided Components

Quenching and Cooling

Quenchant Characterization using the TENSI Probe

Rosa L. Simencio Otero; Jônatas M. Viscaino; Lauralice C.F. Canale; George E. Totten; Lemmy Meekisho

heat-treating 2017; 374-379https://doi.org/10.31399/asm.cp.ht2017p0374

View Articletitled, Quenchant Characterization using the TENSI Probe

Developing Rotary-Arm Type Test System with a Small Platinum Ball Probe for Determination of Cooling Characteristics of Quenchants

Kyozo Arimoto; Mitsuyoshi Shimaoka; Fumiaki Ikuta

heat-treating 2017; 380-386https://doi.org/10.31399/asm.cp.ht2017p0380

View Articletitled, Developing Rotary-Arm Type Test System with a Small Platinum Ball Probe for Determination of Cooling Characteristics of Quenchants

A New Test Method to Characterize Heat Transfer Coefficient Distribution in Industrial Gas Quenching Systems

Yuan Lu; Haixuan Yu; Richard D. Sisson

heat-treating 2017; 387-388https://doi.org/10.31399/asm.cp.ht2017p0387

View Articletitled, A New Test Method to Characterize Heat Transfer Coefficient Distribution in Industrial Gas Quenching Systems

The Effect of Contamination on Cooling Curve Behavior of Polymer Quenchants

D. Scott MacKenzie

heat-treating 2017; 389-393https://doi.org/10.31399/asm.cp.ht2017p0389

View Articletitled, The Effect of Contamination on Cooling Curve Behavior of Polymer Quenchants

Comparative Study of the Effect of Section Thickness of Steel during Quenching in Neem and Mineral Oil

U. Vignesh Nayak; K. Narayan Prabhu

heat-treating 2017; 394-402https://doi.org/10.31399/asm.cp.ht2017p0394

View Articletitled, Comparative Study of the Effect of Section Thickness of Steel during Quenching in Neem and Mineral Oil

Identification of the Important Process Parameters to Control Distortion and Residual Stress During Heat Treating

Haixuan Yu; Yuan Lu; Tianyi Zhou; Richard D. Sisson

heat-treating 2017; 403-406https://doi.org/10.31399/asm.cp.ht2017p0403

View Articletitled, Identification of the Important Process Parameters to Control Distortion and Residual Stress During Heat Treating

An Inverse Method for Determining Steel Properties for Simulation of Phase Transformations During Quenching

N.V. Biba; A.A. Shitikov; A.I. Alimov

heat-treating 2017; 407-410https://doi.org/10.31399/asm.cp.ht2017p0407

View Articletitled, An Inverse Method for Determining Steel Properties for Simulation of Phase Transformations During Quenching

CFD Investigation of Quench Media and Orientation Effects on Structural Stress Induced in the Intense Quenching Processes for Aluminum Cylinder Heads

James Jan; Madhusudhan Nannapuraju

heat-treating 2017; 411-421https://doi.org/10.31399/asm.cp.ht2017p0411

View Articletitled, CFD Investigation of Quench Media and Orientation Effects on Structural Stress Induced in the Intense Quenching Processes for Aluminum Cylinder Heads

Numerical Model of Controlled Cooling of Steel Hot Rolled Bars

Božo Smoljan; Dario Iljkić; Bojan Senčić; Robert Vertnik

heat-treating 2017; 422-429https://doi.org/10.31399/asm.cp.ht2017p0422

View Articletitled, Numerical Model of Controlled Cooling of Steel Hot Rolled Bars

An Experimental Study on Blade Curving due to Quenching in the Japanese Sword

Kyozo Arimoto; Muneyoshi Iyota

heat-treating 2017; 430-435https://doi.org/10.31399/asm.cp.ht2017p0430

View Articletitled, An Experimental Study on Blade Curving due to Quenching in the Japanese Sword

Re-Wetting Behavior and Heat Extraction during Laboratory-Scale Quenching Experiments using Two Probe Geometries

R. Cruces-Reséndez; B. Hernández-Morales; E.I. Durán García

heat-treating 2017; 436-443https://doi.org/10.31399/asm.cp.ht2017p0436

View Articletitled, Re-Wetting Behavior and Heat Extraction during Laboratory-Scale Quenching Experiments using Two Probe Geometries

Evaluation and Control Technique of Cooling Unevenness by Quenching Oil

Rikki Homma; Katsumi Ichitani; Mika Matsumoto; Greg Steiger

heat-treating 2017; 444-450https://doi.org/10.31399/asm.cp.ht2017p0444

View Articletitled, Evaluation and Control Technique of Cooling Unevenness by Quenching Oil

Quenching and Partitioning in Hot Stamped Steels

Claudia Ramón-Reyna; Ignacio Álvarez-Elcoro; Rafael Mercado-Solís; Luis Leduc-Lezama; Armando Salinas-Rodríguez; Omar García Rincón

heat-treating 2017; 451-456https://doi.org/10.31399/asm.cp.ht2017p0451

View Articletitled, Quenching and Partitioning in Hot Stamped Steels

Surface Engineering

Thermal Fatigue in Hot Work Tool Steels - A Review

Ruy Ribeiro da Silva Junior; George E. Totten; João Carmo Vendramim; Lauralice de Campos Franceschini Canale

heat-treating 2017; 457-468https://doi.org/10.31399/asm.cp.ht2017p0457

View Articletitled, Thermal Fatigue in Hot Work Tool Steels - A Review

Boriding of AISI 440B Stainless Steel and Coating Characterization

Pedro Gabriel Bonella de Oliveira; Ricardo Tadeu Junior Aureliano; Fábio Edson Mariani; George Edward Totten; Luiz Carlos Casteletti

heat-treating 2017; 469-473https://doi.org/10.31399/asm.cp.ht2017p0469

View Articletitled, Boriding of AISI 440B Stainless Steel and Coating Characterization

Corrosion Resistance of Niobium and Vanadium Carbide Layers Produced by Thermoreactive Diffusion Treatments on Spheroidal Cast Iron

Carolina Soares; Fábio Edson Mariani; Galtiere Corrêa Rêgo; Gustavo Satoru Takeya; George Edward Totten; Luiz Carlos Casteletti

heat-treating 2017; 474-479https://doi.org/10.31399/asm.cp.ht2017p0474

View Articletitled, Corrosion Resistance of Niobium and Vanadium Carbide Layers Produced by Thermoreactive Diffusion Treatments on Spheroidal Cast Iron

Nitriding

Nitriding and Ferritic Nitrocarburizing Atmospheres - Prediction and Control

William J. Bernard, III

heat-treating 2017; 480-482https://doi.org/10.31399/asm.cp.ht2017p0480

View Articletitled, Nitriding and Ferritic Nitrocarburizing Atmospheres - Prediction and Control

Alternative Surface Activation Techniques When Nitriding Stainless Steels

Saadia Nousir; Jack A. Kalucki

heat-treating 2017; 483-492https://doi.org/10.31399/asm.cp.ht2017p0483

View Articletitled, Alternative Surface Activation Techniques When Nitriding Stainless Steels

Effects of Composition, Starting Microstructure, and Tempering Conditions on the Changes in Core Properties after a Simulated Nitride Thermal Cycle

Jonah Klemm-Toole; Kip Findley; Robert Cryderman; Michael Burnett

heat-treating 2017; 493-501https://doi.org/10.31399/asm.cp.ht2017p0493

View Articletitled, Effects of Composition, Starting Microstructure, and Tempering Conditions on the Changes in Core Properties after a Simulated Nitride Thermal Cycle

Thermal Mechanical Processing and Welding

Uphill Quenching of Aluminum Alloys—A Progress Report

Wellington da S. Mattos; Thiago Ferreira; George E. Totten; Lauralice de Campos F. Canale

heat-treating 2017; 502-510https://doi.org/10.31399/asm.cp.ht2017p0502

View Articletitled, Uphill Quenching of Aluminum Alloys—A Progress Report

Effect of Post Weld Heat Treatments on Electron Beam Welded SAE 5137 Steel

Valmik Bhavar; Prakash Kattire; Sandeep Thakare; Santosh Mane; Sachin Patil; Vinayak Pawar; RKP Singh

heat-treating 2017; 511-518https://doi.org/10.31399/asm.cp.ht2017p0511

View Articletitled, Effect of Post Weld Heat Treatments on Electron Beam Welded SAE 5137 Steel

Simulation of Temperature Profile in Longitudinal Welded Tubes During High-Frequency Induction Welding

Prerana Das; John Inge Asperheim; Bjørnar Grande; Thomas Petzold; Dietmar Hömberg

heat-treating 2017; 519-523https://doi.org/10.31399/asm.cp.ht2017p0519

View Articletitled, Simulation of Temperature Profile in Longitudinal Welded Tubes During High-Frequency Induction Welding

Aspects of Precise Heat Input Control for High-Frequency Welding

Lesley D. Frame; Kevin Davis; Olexandra Tupalo; Tom Ignatowski; Mick Nallen

heat-treating 2017; 524-533https://doi.org/10.31399/asm.cp.ht2017p0524

View Articletitled, Aspects of Precise Heat Input Control for High-Frequency Welding

Vacuum Processes and Technology

True Single-Piece Flow Case Hardening for In-Line Manufacturing

Tom Hart; Maciej Korecki

heat-treating 2017; 534-540https://doi.org/10.31399/asm.cp.ht2017p0534

View Articletitled, True Single-Piece Flow Case Hardening for In-Line Manufacturing

Low-Pressure Carburizing of Powder Metal Components

Volker Heuer; Gunther Schmitt; Philipp Kauffmann; Katharina Faerber; Roger Lawcock; Rohith Shivanath

heat-treating 2017; 541-544https://doi.org/10.31399/asm.cp.ht2017p0541

View Articletitled, Low-Pressure Carburizing of Powder Metal Components

A New, Innovative Approach to Designing a Vacuum Furnace Hot Zone

William R. Jones; Réal J. Fradette

heat-treating 2017; 545-549https://doi.org/10.31399/asm.cp.ht2017p0545

View Articletitled, A New, Innovative Approach to Designing a Vacuum Furnace Hot Zone

Low Pressure Carburizing Distortion Data Comparing Oil and High Pressure Gas Quenching

Vincent Lelong; Dennis Beauchesne

heat-treating 2017; 550-553https://doi.org/10.31399/asm.cp.ht2017p0550

View Articletitled, Low Pressure Carburizing Distortion Data Comparing Oil and High Pressure Gas Quenching

Multiple Chamber Vacuum Furnaces vs. Single-Chamber Vacuum Furnaces—A Review

Benjamin T. Bernard; William J. Bernard, III

heat-treating 2017; 554-556https://doi.org/10.31399/asm.cp.ht2017p0554

View Articletitled, Multiple Chamber Vacuum Furnaces vs. Single-Chamber Vacuum Furnaces—A Review

Advanced Nickel Alloy for High-Temperature Vacuum Baskets

Marc Glasser; Roger Jones

heat-treating 2017; 557-559https://doi.org/10.31399/asm.cp.ht2017p0557

View Articletitled, Advanced Nickel Alloy for High-Temperature Vacuum Baskets

Vacuum Carburizing Steel Alloys Containing Strong Carbide Formers

B. Lynn Ferguson; Zhichao Li; Justin Sims; Tianyu Yu

heat-treating 2017; 560-564https://doi.org/10.31399/asm.cp.ht2017p0560

View Articletitled, Vacuum Carburizing Steel Alloys Containing Strong Carbide Formers

Copper Evaporation During Low Pressure Carburizing

Trevor Jones; Virginia Osterman; Donald Jordan

heat-treating 2017; 565-567https://doi.org/10.31399/asm.cp.ht2017p0565

View Articletitled, Copper Evaporation During Low Pressure Carburizing

Optimizing Cycle Time and Process Flexibility Using Vacuum Sealed Quenching

Don Marteeny; Maciej Korecki

heat-treating 2017; 568-572https://doi.org/10.31399/asm.cp.ht2017p0568

View Articletitled, Optimizing Cycle Time and Process Flexibility Using Vacuum Sealed Quenching

Volume Information

Organizing Committee and Reviewers

heat-treating 2017; iii-ivhttps://doi.org/10.31399/asm.cp.ht2017fm01

View Articletitled, Organizing Committee and Reviewers