Volumes | Heat Treating Conference Proceedings | ASM International

Skip to Main Content

Skip Nav Destination

Heat Treat 2015: Proceedings from the 28th Heat Treating Society Conference

Advanced Processes

Beyond Larsen Miller

A.R. Ramakrishnan; M. Grenier

heat-treating 2015; 1-5https://doi.org/10.31399/asm.cp.ht2015p0001

View Articletitled, Beyond Larsen Miller

Vacuum Furnaces Were Made for Additive Manufacturing

Robert Hill

heat-treating 2015; 6-14https://doi.org/10.31399/asm.cp.ht2015p0006

View Articletitled, Vacuum Furnaces Were Made for Additive Manufacturing

Advances in Heat Treating

Laser Heat Treatment with the Latest System Components

Steffen Bonss; Jan Hannweber; Udo Karsunke; Stefan Kuehn; Marko Seifert; Dirk Poegen; Eckhard Beyer

heat-treating 2015; 15-20https://doi.org/10.31399/asm.cp.ht2015p0015

View Articletitled, Laser Heat Treatment with the Latest System Components

Replacing Hot Stamped, Boron, and DP1000 Steels with Room Temperature Formable Flash Bainite 1500 Advanced High-Strength Steel

Gary M Cola, Jr.

heat-treating 2015; 21-28https://doi.org/10.31399/asm.cp.ht2015p0021

View Articletitled, Replacing Hot Stamped, Boron, and DP1000 Steels with Room Temperature Formable Flash Bainite 1500 Advanced High-Strength Steel

Residual Stress Distribution in Induction Hardened Gear

Dmitry Ivanov; John Inge Asperheim; Leif Markegård

heat-treating 2015; 29-34https://doi.org/10.31399/asm.cp.ht2015p0029

View Articletitled, Residual Stress Distribution in Induction Hardened Gear

Heat Treating 400-Series Stainless Steel in Air Without Flaking

Susan J. Kerber

heat-treating 2015; 35-40https://doi.org/10.31399/asm.cp.ht2015p0035

View Articletitled, Heat Treating 400-Series Stainless Steel in Air Without Flaking

Austempering Treatment in HIP Improves Ausferritic Steels and Ductile Irons

Richard Larker; Per Rubin

heat-treating 2015; 41-47https://doi.org/10.31399/asm.cp.ht2015p0041

View Articletitled, Austempering Treatment in HIP Improves Ausferritic Steels and Ductile Irons

Behavior of a Complex Steel Part During Hardening Heat Treatment

Vishal R Marje; Srivatsa Kulkarni; G Balachandran; V Balasubramanian

heat-treating 2015; 48-54https://doi.org/10.31399/asm.cp.ht2015p0048

View Articletitled, Behavior of a Complex Steel Part During Hardening Heat Treatment

New Technical Resource for Induction Heat Treating Professionals

Valery Rudnev

heat-treating 2015; 55-59https://doi.org/10.31399/asm.cp.ht2015p0055

View Articletitled, New Technical Resource for Induction Heat Treating Professionals

The Effects of Tempering on the Structure of Martensite in 52100 Steel

Haixuan Yu; Yuan Lu; Xiaoqing Cai; Richard D. Sisson, Jr.

heat-treating 2015; 60-63https://doi.org/10.31399/asm.cp.ht2015p0060

View Articletitled, The Effects of Tempering on the Structure of Martensite in 52100 Steel

High Temperature Austenitizing of Low Alloy Steels: What is Left after 40 Years?

Donato Firrao; Paolo Matteis; Pietro Cornetti; Alberto Sapora

heat-treating 2015; 64-70https://doi.org/10.31399/asm.cp.ht2015p0064

View Articletitled, High Temperature Austenitizing of Low Alloy Steels: What is Left after 40 Years?

Development of Nanostructured Austempered Ductile Cast Iron (ADI)

Susil K. Putatunda; Saranya Panneerselvam; Mohamed Alshwigi

heat-treating 2015; 71-75https://doi.org/10.31399/asm.cp.ht2015p0071

View Articletitled, Development of Nanostructured Austempered Ductile Cast Iron (ADI)

Analysis of Heat Treat Growth on Carburized Ring Gear and Multivariate Regression Model Development

Olga K. Rowan; Thomas J. Yaniak

heat-treating 2015; 76-81https://doi.org/10.31399/asm.cp.ht2015p0076

View Articletitled, Analysis of Heat Treat Growth on Carburized Ring Gear and Multivariate Regression Model Development

Design and Validation of Induction Heat Treatment Processes Utilizing 2D and 3D Computer Simulation

Collin Russell

heat-treating 2015; 82-85https://doi.org/10.31399/asm.cp.ht2015p0082

View Articletitled, Design and Validation of Induction Heat Treatment Processes Utilizing 2D and 3D Computer Simulation

Principles of Heat Treatment Processes Modeling

Emilia Wołowiec-Korecka

heat-treating 2015; 86-93https://doi.org/10.31399/asm.cp.ht2015p0086

View Articletitled, Principles of Heat Treatment Processes Modeling

Nonferrous Alloys

Analyses of Aging in Aluminum Cast Alloys by X-Ray Diffraction

M. Delgado; F.A. Pérez-González; N.F. Garza-Montes-de-Oca; R. Colás; C.S. Cázares; J.A. González; J. Talamantes-Silva; S. Haro

heat-treating 2015; 94-98https://doi.org/10.31399/asm.cp.ht2015p0094

View Articletitled, Analyses of Aging in Aluminum Cast Alloys by X-Ray Diffraction

New Heat Treatment Technologies for Aluminum Automotive Body Structures

Tim Donofrio

heat-treating 2015; 99-106https://doi.org/10.31399/asm.cp.ht2015p0099

View Articletitled, New Heat Treatment Technologies for Aluminum Automotive Body Structures

Quenching and Distortion Analyses in Aluminum

L. Espinosa; O. Zapata; F.A. Pérez-González; L.A. Reyes; R. Colás; K. Mariella; A. Cantú

heat-treating 2015; 107-110https://doi.org/10.31399/asm.cp.ht2015p0107

View Articletitled, Quenching and Distortion Analyses in Aluminum

Microstructure Effects on Tensile Brittleness of As-Quenched Zl205A at Elevated Temperature

Wenguang Wang; Guannan Guo; Gang Wang; Yiming Rong

heat-treating 2015; 111-115https://doi.org/10.31399/asm.cp.ht2015p0111

View Articletitled, Microstructure Effects on Tensile Brittleness of As-Quenched Zl205A at Elevated Temperature

Effects of Deformation and Heat Treatment on Microstructure and Mechanical Properties of Ti-6Al-4V Alloy

Ashish Supare; Shital Jadhav; Sandip Patil; Amit Powar; Bhagwan Farane; Rajkumar Singh

heat-treating 2015; 116-122https://doi.org/10.31399/asm.cp.ht2015p0116

View Articletitled, Effects of Deformation and Heat Treatment on Microstructure and Mechanical Properties of Ti-6Al-4V Alloy

Applied Energy

Effect of Steel Hardenability on Stress Formation in an Induction Hardened Axle Shaft

B. Lynn Ferguson; Justin Sims; Z. Charlie Li; Valentin Nemkov; Robert Goldstein; John Jackowski

heat-treating 2015; 123-128https://doi.org/10.31399/asm.cp.ht2015p0123

View Articletitled, Effect of Steel Hardenability on Stress Formation in an Induction Hardened Axle Shaft

Torsional Fatigue Behavior of Through Surface Hardened Low Hardenability Steel Compared to Gas Carburized SAE 8620 Steel

Erin M. Govier; Matthew Glass; James Larsen

heat-treating 2015; 129-132https://doi.org/10.31399/asm.cp.ht2015p0129

View Articletitled, Torsional Fatigue Behavior of Through Surface Hardened Low Hardenability Steel Compared to Gas Carburized SAE 8620 Steel

The Pick-Up-Revolution for Hardening CV-Joints— Combining Multiple Heat Treating Operations into the Same Set-Up for Speed, Process Stability, and Ease of Integration into the Process Chain

Christian Krause; Mark Davis; Dirk Schlesselmann1

heat-treating 2015; 133-135https://doi.org/10.31399/asm.cp.ht2015p0133

View Articletitled, The Pick-Up-Revolution for Hardening CV-Joints— Combining Multiple Heat Treating Operations into the Same Set-Up for Speed, Process Stability, and Ease of Integration into the Process Chain

Effective Ways of Joining Using Induction Heating Technology

Scott R. Larrabee

heat-treating 2015; 136-140https://doi.org/10.31399/asm.cp.ht2015p0136

View Articletitled, Effective Ways of Joining Using Induction Heating Technology

Breakthrough in Induction Hardening Shafts

Valery Rudnev; William West; Aaron Goodwin; Steve Fillip

heat-treating 2015; 141-145https://doi.org/10.31399/asm.cp.ht2015p0141

View Articletitled, Breakthrough in Induction Hardening Shafts

Evaluation of Mechanical Properties and Analysis of Rapidly Heat Treated M-42 High-Speed Steels

R.N. KarthikBabu; R. Sarvesh; Prasad A. Rajendra; G. Swaminathan

heat-treating 2015; 146-153https://doi.org/10.31399/asm.cp.ht2015p0146

View Articletitled, Evaluation of Mechanical Properties and Analysis of Rapidly Heat Treated M-42 High-Speed Steels

Applied Technology

Advances in Power Supplies for Efficient Electric Heating

Souheil Benzerrouk

heat-treating 2015; 154-158https://doi.org/10.31399/asm.cp.ht2015p0154

View Articletitled, Advances in Power Supplies for Efficient Electric Heating

Multiple Chamber Vacuum Furnace Designs Improve Efficiency, Part Appearance, and Hot Zone Maintenance

Benjamin T. Bernard

heat-treating 2015; 159-161https://doi.org/10.31399/asm.cp.ht2015p0159

View Articletitled, Multiple Chamber Vacuum Furnace Designs Improve Efficiency, Part Appearance, and Hot Zone Maintenance

The 1:1 Rule for Quench Tanks— A Suboptimal and Misapplied Design Criterion

William J. Bernard, III

heat-treating 2015; 162-166https://doi.org/10.31399/asm.cp.ht2015p0162

View Articletitled, The 1:1 Rule for Quench Tanks— A Suboptimal and Misapplied Design Criterion

Specifying Nitriding Process Requirements

Madhu S. Chatterjee; Roxana Ruxanda

heat-treating 2015; 167-177https://doi.org/10.31399/asm.cp.ht2015p0167

View Articletitled, Specifying Nitriding Process Requirements

Obtaining Nadcap Accreditation— Helping You Pass Your Audit

Nathan Durham

heat-treating 2015; 178-185https://doi.org/10.31399/asm.cp.ht2015p0178

View Articletitled, Obtaining Nadcap Accreditation— Helping You Pass Your Audit

Choosing the Proper Heat Resistant Alloy Based on Application Criteria

Marc Glasser

heat-treating 2015; 186-195https://doi.org/10.31399/asm.cp.ht2015p0186

View Articletitled, Choosing the Proper Heat Resistant Alloy Based on Application Criteria

RA 602 CA— An Alloy for the Highest Temperature Processes

Marc Glasser

heat-treating 2015; 196-203https://doi.org/10.31399/asm.cp.ht2015p0196

View Articletitled, RA 602 CA— An Alloy for the Highest Temperature Processes

The Growth of Predictive Maintenance and Its Effect on Future Furnace Performance

Aymeric Goldsteinas

heat-treating 2015; 204-209https://doi.org/10.31399/asm.cp.ht2015p0204

View Articletitled, The Growth of Predictive Maintenance and Its Effect on Future Furnace Performance

Retiring Paper-Based Maintenance Systems in Commercial Heat Treating Shops

Roger A Jones

heat-treating 2015; 210-213https://doi.org/10.31399/asm.cp.ht2015p0210

View Articletitled, Retiring Paper-Based Maintenance Systems in Commercial Heat Treating Shops

Heat Treating in the Digital Age

Bill Klick

heat-treating 2015; 214-218https://doi.org/10.31399/asm.cp.ht2015p0214

View Articletitled, Heat Treating in the Digital Age

Maximizing the Work Zone with Creative Fixtures

Robert E. Kornfeld

heat-treating 2015; 219-222https://doi.org/10.31399/asm.cp.ht2015p0219

View Articletitled, Maximizing the Work Zone with Creative Fixtures

Reducing Ammonia Consumption and Emissions Using Zeroflow Gas Nitriding

Leszek Małdzinski; Mark K. Hemsath

heat-treating 2015; 223-228https://doi.org/10.31399/asm.cp.ht2015p0223

View Articletitled, Reducing Ammonia Consumption and Emissions Using Zeroflow Gas Nitriding

Understanding Furnace Atmosphere Composition for Neutral and Gas Carburizing Applications

Jim Oakes

heat-treating 2015; 229-232https://doi.org/10.31399/asm.cp.ht2015p0229

View Articletitled, Understanding Furnace Atmosphere Composition for Neutral and Gas Carburizing Applications

Understanding Process Sensitivities in Press Quenching— An Integrated Approach

Arthur C. Reardon; Andrew Freborg; Z. Charlie Li; B. Lynn Ferguson

heat-treating 2015; 233-251https://doi.org/10.31399/asm.cp.ht2015p0233

View Articletitled, Understanding Process Sensitivities in Press Quenching— An Integrated Approach

Effects of Polymer Concentration in Quenchant Bath

Justin Schlitzer; John Hollenbeck

heat-treating 2015; 252-257https://doi.org/10.31399/asm.cp.ht2015p0252

View Articletitled, Effects of Polymer Concentration in Quenchant Bath

Everything You Wanted To Know About AMS2750E but Were Afraid To Ask

Jason Schulze

heat-treating 2015; 258https://doi.org/10.31399/asm.cp.ht2015p0258

View Articletitled, Everything You Wanted To Know About AMS2750E but Were Afraid To Ask

Hydroprime Modular Plants Provide Low Cost, Reliable Hydrogen for Heat Treating

Goutam H. Shahani; Kyle Finley; Larry Lyda; Grzegorz Moroz; Nick Onelli

heat-treating 2015; 259-261https://doi.org/10.31399/asm.cp.ht2015p0259

View Articletitled, Hydroprime Modular Plants Provide Low Cost, Reliable Hydrogen for Heat Treating

Next Gen Technology—Wearables and Predictive Maintenance in Heat Treatment

Peter Sherwin

heat-treating 2015; 262-265https://doi.org/10.31399/asm.cp.ht2015p0262

View Articletitled, Next Gen Technology—Wearables and Predictive Maintenance in Heat Treatment

Prediction of Mechanical Properties and Microstructure Composition of Quenched and Tempered Steel

Božo Smoljan; Dario Iljkić; Neven Tomaši

heat-treating 2015; 266-273https://doi.org/10.31399/asm.cp.ht2015p0266

View Articletitled, Prediction of Mechanical Properties and Microstructure Composition of Quenched and Tempered Steel

Furnace Atmosphere Troubleshooting—Producing the Highest Quality Stainless Steel Cutlery

Richard F. Speaker

heat-treating 2015; 274-276https://doi.org/10.31399/asm.cp.ht2015p0274

View Articletitled, Furnace Atmosphere Troubleshooting—Producing the Highest Quality Stainless Steel Cutlery

Rockwell Hardness Bench Testing of Induction Heat Treated Work Pieces

F. R. Specht

heat-treating 2015; 277-286https://doi.org/10.31399/asm.cp.ht2015p0277

View Articletitled, Rockwell Hardness Bench Testing of Induction Heat Treated Work Pieces

Controlled Gas Nitriding/Nitrocarburizing Process Control and Precalculation Possibilities

S. Heineck; Frank Theisen

heat-treating 2015; 287-291https://doi.org/10.31399/asm.cp.ht2015p0287

View Articletitled, Controlled Gas Nitriding/Nitrocarburizing Process Control and Precalculation Possibilities

How It’s Done and Why— Transitioning Parts from Atmosphere Carburizing to Low-Pressure Vacuum Carburizing

Vincent Lelong; Amberlee Welch

heat-treating 2015; 292-298https://doi.org/10.31399/asm.cp.ht2015p0292

View Articletitled, How It’s Done and Why— Transitioning Parts from Atmosphere Carburizing to Low-Pressure Vacuum Carburizing

Temperature Processing Evolves Atmosphere Practices to Meet Community Needs— At a Profit

David Wolff; Will Engelhard; Richard Brennan

heat-treating 2015; 299-301https://doi.org/10.31399/asm.cp.ht2015p0299

View Articletitled, Temperature Processing Evolves Atmosphere Practices to Meet Community Needs— At a Profit

Best Practice for Design and Manufacturing of Heat Treating Inductors

C. Yakey; V. Nemkov; R. Goldstein; J. Jackowski

heat-treating 2015; 302-307https://doi.org/10.31399/asm.cp.ht2015p0302

View Articletitled, Best Practice for Design and Manufacturing of Heat Treating Inductors

Enhancement of Carbonitride Tool— Retained Austenite and Microhardness Prediction

Lei Zhang; Liang He; R.D. Sisson, Jr.

heat-treating 2015; 308-312https://doi.org/10.31399/asm.cp.ht2015p0308

View Articletitled, Enhancement of Carbonitride Tool— Retained Austenite and Microhardness Prediction

Technology and Advancements in Analog and Digital Control

Steve Miller

heat-treating 2015; 313-316https://doi.org/10.31399/asm.cp.ht2015p0313

View Articletitled, Technology and Advancements in Analog and Digital Control

Atmosphere Technology

Optimization of Protective Atmospheres for Annealing and Hardening Operations in Continuous Furnaces

Liang He; Zbigniew Zurecki

heat-treating 2015; 317-324https://doi.org/10.31399/asm.cp.ht2015p0317

View Articletitled, Optimization of Protective Atmospheres for Annealing and Hardening Operations in Continuous Furnaces

Plasma Nitriding Potential and a New Modeling Approach for Plasma Nitriding Process Control

Marian Georg Skalecki; Heinrich Klümper-Westkamp; Franz Hoffmann; Hans-Werner Zoch; Sebastian Bischoff; Jörn Rohde

heat-treating 2015; 325-334https://doi.org/10.31399/asm.cp.ht2015p0325

View Articletitled, Plasma Nitriding Potential and a New Modeling Approach for Plasma Nitriding Process Control

Microstructure Development

Improvement in Mechanical Properties of 13Cr Martensitic Stainless Steels Using Modified Heat Treatments

Srivatsa Kulkarni; Perla Srinivas; P.K. Biswal; G. Balachandran; V. Balasubramanian

heat-treating 2015; 335-341https://doi.org/10.31399/asm.cp.ht2015p0335

View Articletitled, Improvement in Mechanical Properties of 13Cr Martensitic Stainless Steels Using Modified Heat Treatments

Determination of the Cause of Low Temperature Charpy Toughness Values in ASTM A350 LF2 Flanges

Andrew B. Nissan; Kirk C. Baker

heat-treating 2015; 342-349https://doi.org/10.31399/asm.cp.ht2015p0342

View Articletitled, Determination of the Cause of Low Temperature Charpy Toughness Values in ASTM A350 LF2 Flanges

Microstructure and Failure Analysis of Austenitic Fe-Ni Alloys and Ni-Cr-Fe Alloys for Furnace Alloys and Fixtures

Anbo Wang; R.D. Sisson, Jr.

heat-treating 2015; 350-357https://doi.org/10.31399/asm.cp.ht2015p0350

View Articletitled, Microstructure and Failure Analysis of Austenitic Fe-Ni Alloys and Ni-Cr-Fe Alloys for Furnace Alloys and Fixtures

Effect of Heat Treatment on the Microstructure, Mechanical Properties, and Corrosion Behavior of Ti-6Al-4V via Direct Metal Laser Sintering

Yangzi Xu; Yuan Lu; R.D. Sisson, Jr.

heat-treating 2015; 358-364https://doi.org/10.31399/asm.cp.ht2015p0358

View Articletitled, Effect of Heat Treatment on the Microstructure, Mechanical Properties, and Corrosion Behavior of Ti-6Al-4V via Direct Metal Laser Sintering

Meandering Winding Magnetometers for the Evaluation of Surface Hardness on Carburized Steel

Lei Zhang; Richard D. Sisson, Jr.

heat-treating 2015; 365-367https://doi.org/10.31399/asm.cp.ht2015p0365

View Articletitled, Meandering Winding Magnetometers for the Evaluation of Surface Hardness on Carburized Steel

The Influence of Temperature on the Austenite Grain Size and Microstructure of 4140 Steel

Rui Zhang; Richard D. Sisson, Jr.

heat-treating 2015; 368-372https://doi.org/10.31399/asm.cp.ht2015p0368

View Articletitled, The Influence of Temperature on the Austenite Grain Size and Microstructure of 4140 Steel

Processes and Applications

Induction Coupled Thermo-Magnetic-Processing (ITMP)

Aquil Ahmad; George Pfaffmann

heat-treating 2015; 373-378https://doi.org/10.31399/asm.cp.ht2015p0373

View Articletitled, Induction Coupled Thermo-Magnetic-Processing (ITMP)

How Mass Imbalance and Cold-Sink Effects Influence Induction Hardened Case Depth

Andrew Bernhard

heat-treating 2015; 379-382https://doi.org/10.31399/asm.cp.ht2015p0379

View Articletitled, How Mass Imbalance and Cold-Sink Effects Influence Induction Hardened Case Depth

Effect of Deep Cryogenic Treatment on AISI H13 Tool Steel

Valmik Bhavar; Shreyans Khot; Prakash Kattire; Mohan Mehta; R.K.P. Singh

heat-treating 2015; 383-389https://doi.org/10.31399/asm.cp.ht2015p0383

View Articletitled, Effect of Deep Cryogenic Treatment on AISI H13 Tool Steel

Advanced Robotics in Heat Treat Verification Using Eddy Current

Dan DeVries

heat-treating 2015; 390-393https://doi.org/10.31399/asm.cp.ht2015p0390

View Articletitled, Advanced Robotics in Heat Treat Verification Using Eddy Current

Torsional Fatigue Behavior of 8620 Steel Subjected to High-Magnetic Field Thermal Processing

James M. Larsen; Erin M. Govier; Matthew J. Glass

heat-treating 2015; 394-397https://doi.org/10.31399/asm.cp.ht2015p0394

View Articletitled, Torsional Fatigue Behavior of 8620 Steel Subjected to High-Magnetic Field Thermal Processing

Applying and Specifying Metallurgical Engineering in the Production of Heavy Truck Axle Shafts

Steven C. Heifner

heat-treating 2015; 398-404https://doi.org/10.31399/asm.cp.ht2015p0398

View Articletitled, Applying and Specifying Metallurgical Engineering in the Production of Heavy Truck Axle Shafts

Ten New Trends in Heat Treatment— Global Prospective

Janusz Kowalewski

heat-treating 2015; 405-414https://doi.org/10.31399/asm.cp.ht2015p0405

View Articletitled, Ten New Trends in Heat Treatment— Global Prospective

Mechanical Properties and Microstructure of AISI 41B30 Forgings in As-Forged and Normalized Condition

Dusan Milicevic

heat-treating 2015; 415-424https://doi.org/10.31399/asm.cp.ht2015p0415

View Articletitled, Mechanical Properties and Microstructure of AISI 41B30 Forgings in As-Forged and Normalized Condition

Energy Savings through Steady State Control

Chris Mooney

heat-treating 2015; 425-427https://doi.org/10.31399/asm.cp.ht2015p0425

View Articletitled, Energy Savings through Steady State Control

Austempering: Process, Applications, and Equipment

Wallace John Titus; Michael E. Neumann

heat-treating 2015; 428-430https://doi.org/10.31399/asm.cp.ht2015p0428

View Articletitled, Austempering: Process, Applications, and Equipment

The Sub-Zero Celsius Treatment of Precipitation Hardenable Semi-Austenitic Stainless Steels

Matteo Villa; Mikkel F. Hansen; Marcel A.J. Somers

heat-treating 2015; 431-435https://doi.org/10.31399/asm.cp.ht2015p0431

View Articletitled, The Sub-Zero Celsius Treatment of Precipitation Hardenable Semi-Austenitic Stainless Steels

Sustainable Energy Efficiency in Industry

Michael L. Stowe

heat-treating 2015; 436-441https://doi.org/10.31399/asm.cp.ht2015p0436

View Articletitled, Sustainable Energy Efficiency in Industry

Overview of Computational Fluid Dynamics Modeling for Furnace Design and Improvements

Ronald E. Waligora

heat-treating 2015; 442-445https://doi.org/10.31399/asm.cp.ht2015p0442

View Articletitled, Overview of Computational Fluid Dynamics Modeling for Furnace Design and Improvements

Simulation of Nitriding Processes

Karl-Michael Winter

heat-treating 2015; 446-455https://doi.org/10.31399/asm.cp.ht2015p0446

View Articletitled, Simulation of Nitriding Processes

Quenching and Cooling

Countermeasures for Various Defective Phenomenon in the Heat Treatment Process

Katsumi Ichitani; Yuji Arita

heat-treating 2015; 456-462https://doi.org/10.31399/asm.cp.ht2015p0456

View Articletitled, Countermeasures for Various Defective Phenomenon in the Heat Treatment Process

Controlled Cooling as an Alternative to Normalizing/Isoannealing Heat Treatment of Case Carburizing Grade Steel Forgings

Priyanshu Bajaj; Pallav Chatterjee; Udayan B. Pathak

heat-treating 2015; 463-468https://doi.org/10.31399/asm.cp.ht2015p0463

View Articletitled, Controlled Cooling as an Alternative to Normalizing/Isoannealing Heat Treatment of Case Carburizing Grade Steel Forgings

High-Strength Steel Bainitizing Using Controlled In Situ Gas Quenching within Machining Processes

Thibaud Bucquet; Udo Fritsching; Maxim Gulpak; André Wagner

heat-treating 2015; 469-474https://doi.org/10.31399/asm.cp.ht2015p0469

View Articletitled, High-Strength Steel Bainitizing Using Controlled In Situ Gas Quenching within Machining Processes

Quenching Process Analysis of an Aluminum Cylinder Using Computational Fluid Dynamics

Alberto Cantu-Perez; Karlo Mariella; Rafael Colás; Luis Espinosa; Omar Rodriguez; Arturo Keer

heat-treating 2015; 475-478https://doi.org/10.31399/asm.cp.ht2015p0475

View Articletitled, Quenching Process Analysis of an Aluminum Cylinder Using Computational Fluid Dynamics

Role of Staggered-Array Water Jet on Intensive Quenching for Heat Treatment

Jungho Lee; Tae Hoon Kim; Kyu Hyung Do; Sangho Sohn; Seong Hyuk Lee; Chang Kyung Choi

heat-treating 2015; 479-485https://doi.org/10.31399/asm.cp.ht2015p0479

View Articletitled, Role of Staggered-Array Water Jet on Intensive Quenching for Heat Treatment

Coupling CFD and Oil Quench Hardening Analysis of Gear Component

Zhichao (Charlie) Li; B. Lynn Ferguson; David Greif; Zlatko Kovacic; Simon Urbas; Rok Kopun

heat-treating 2015; 486-489https://doi.org/10.31399/asm.cp.ht2015p0486

View Articletitled, Coupling CFD and Oil Quench Hardening Analysis of Gear Component

Critical Heat Transfer Coefficient Test for Gas Quench Steel Hardenability

Yuan Lu; R.D. Sisson, Jr.; Yiming (Kevin) Rong; Jeffrey Mocsari

heat-treating 2015; 490-494https://doi.org/10.31399/asm.cp.ht2015p0490

View Articletitled, Critical Heat Transfer Coefficient Test for Gas Quench Steel Hardenability

Application of Vegetable-Based Quench Oil to Achieve Safety and Environmental Advantages

Jonn Nebbe; D. Scott MacKenzie

heat-treating 2015; 495-498https://doi.org/10.31399/asm.cp.ht2015p0495

View Articletitled, Application of Vegetable-Based Quench Oil to Achieve Safety and Environmental Advantages

Defining the Adequacy of Direct Harden Water Quench Systems

Michael A. Pershing; Christopher A. Barnes; Zachary S. Birky

heat-treating 2015; 499-503https://doi.org/10.31399/asm.cp.ht2015p0499

View Articletitled, Defining the Adequacy of Direct Harden Water Quench Systems

Impact of Internal Oxidation and Quenching Path on Fatigue of Powertrain Components

A. Stormvinter; H. Kristoffersen; E. Troell; J. Senaneuch; S. Haglund

heat-treating 2015; 504-509https://doi.org/10.31399/asm.cp.ht2015p0504

View Articletitled, Impact of Internal Oxidation and Quenching Path on Fatigue of Powertrain Components

Metallurgical Behavior of SAE 1045 Steel Quenched into Chemically Modified Bioquenchants

Rosa L. Simencio Otero; Lauralice C.F. Canale; George E. Totten

heat-treating 2015; 510-517https://doi.org/10.31399/asm.cp.ht2015p0510

View Articletitled, Metallurgical Behavior of SAE 1045 Steel Quenched into Chemically Modified Bioquenchants

Predictive Model of Wire Rod Cooling

Iván Viéitez; Rubén López-Cancelos; Elena B. Martín; Fernando Varas

heat-treating 2015; 518-524https://doi.org/10.31399/asm.cp.ht2015p0518

View Articletitled, Predictive Model of Wire Rod Cooling

Effect of Hardenability on Temperature and Phases of Spiral Bevel Gear in Press Quenching Process

Gang Wang; Yingtao Zhang; Lin Yang; Lei Cui; Zhichao (Charlie) Li

heat-treating 2015; 525-530https://doi.org/10.31399/asm.cp.ht2015p0525

View Articletitled, Effect of Hardenability on Temperature and Phases of Spiral Bevel Gear in Press Quenching Process

Implementation of a Boiling Heat Transfer Model Based on an Experimental Database

Andrew L. Banka; Jeffrey D. Franklin

heat-treating 2015; 531-535https://doi.org/10.31399/asm.cp.ht2015p0531

View Articletitled, Implementation of a Boiling Heat Transfer Model Based on an Experimental Database

Geometry Optimized Quenching

Cato Dybdahl; Fredrik Haakonsen

heat-treating 2015; 536-541https://doi.org/10.31399/asm.cp.ht2015p0536

View Articletitled, Geometry Optimized Quenching

Enhanced Heat Transfer Coefficient Method to Model Air Quench Process— Investigation of Heat Transfer Coefficient Characteristics by CFD Methods

James Jan; Eben Prabhu; Xingfu Chen; Ulrich Weiss

heat-treating 2015; 542-549https://doi.org/10.31399/asm.cp.ht2015p0542

View Articletitled, Enhanced Heat Transfer Coefficient Method to Model Air Quench Process— Investigation of Heat Transfer Coefficient Characteristics by CFD Methods

Ring Gear Microstructure and Heat Treat Response

Ying-Liang R. Lee; Olga K. Rowan; Michael A. Pershing

heat-treating 2015; 550-555https://doi.org/10.31399/asm.cp.ht2015p0550

View Articletitled, Ring Gear Microstructure and Heat Treat Response

Evaluation of Ultra-High Gas Pressure Quenching during HIP

Stephen J. Mashl; Anders Eklund; Magnus Ahlfors

heat-treating 2015; 556-562https://doi.org/10.31399/asm.cp.ht2015p0556

View Articletitled, Evaluation of Ultra-High Gas Pressure Quenching during HIP

Quench Tank Agitation Design through CFD Simulation

Andrew L. Banka; John D. Nitz; Chris Desadier; Jianhua Xie; Xiping Zhang

heat-treating 2015; 563-568https://doi.org/10.31399/asm.cp.ht2015p0563

View Articletitled, Quench Tank Agitation Design through CFD Simulation

Direct Forge Quenching of Medium Carbon and Low-Alloy Steel Forgings

Priyanshu Bajaj; Udayan B. Pathak

heat-treating 2015; 569-579https://doi.org/10.31399/asm.cp.ht2015p0569

View Articletitled, Direct Forge Quenching of Medium Carbon and Low-Alloy Steel Forgings

Stabilization of Vegetable Oil-Based Quenchants to Thermal-Oxidative Degradation-Effect of Antioxidants on Quenching Performance

Éder Cícero Adão Simêncio; Rosa L. Simencio Otero; Lauralice C.F. Canale; George E. Totten

heat-treating 2015; 580-587https://doi.org/10.31399/asm.cp.ht2015p0580

View Articletitled, Stabilization of Vegetable Oil-Based Quenchants to Thermal-Oxidative Degradation-Effect of Antioxidants on Quenching Performance

Surface Engineering

Optimizing Surface Activation for Repeatable Compound Layer Growth

Zachary S. Birky

heat-treating 2015; 588-593https://doi.org/10.31399/asm.cp.ht2015p0588

View Articletitled, Optimizing Surface Activation for Repeatable Compound Layer Growth

Evolution of Steel Surface Morphology during Controlled Gaseous Nitriding

D. Koshel; J. Kalucki; M. Ellaya; C. Harnagea

heat-treating 2015; 594-599https://doi.org/10.31399/asm.cp.ht2015p0594

View Articletitled, Evolution of Steel Surface Morphology during Controlled Gaseous Nitriding

Torsional Fatigue Performance of Induction Hardened 1045 and 10V45 Steels

Lee Rothleutner; Robert Cryderman; Chester J. Van Tyne; Jody Burke

heat-treating 2015; 600-605https://doi.org/10.31399/asm.cp.ht2015p0600

View Articletitled, Torsional Fatigue Performance of Induction Hardened 1045 and 10V45 Steels

Modeling of Composition and Stress Profiles in Low-Temperature Surface Engineered Stainless Steel

Freja N. Jespersen; Jesper H. Hattel; Marcel A.J. Somers

heat-treating 2015; 606-611https://doi.org/10.31399/asm.cp.ht2015p0606

View Articletitled, Modeling of Composition and Stress Profiles in Low-Temperature Surface Engineered Stainless Steel

Influence of Plastic Deformation on Low-Temperature Surface Hardening of Stainless Steel by Gaseous Nitriding

Federico Bottoli; Grethe Winther; Thomas L. Christiansen; Marcel A.J. Somers

heat-treating 2015; 612-619https://doi.org/10.31399/asm.cp.ht2015p0612

View Articletitled, Influence of Plastic Deformation on Low-Temperature Surface Hardening of Stainless Steel by Gaseous Nitriding

Internal Nitriding of Fe-Cr-Mo Alloys— Precipitation of Mixed Nitrides and Role of the Cr/Mo-Ratio

Tobias Steiner; Sai Ramudu Meka; Eric J. Mittemeijer; Thomas Waldenmaier

heat-treating 2015; 620-624https://doi.org/10.31399/asm.cp.ht2015p0620

View Articletitled, Internal Nitriding of Fe-Cr-Mo Alloys— Precipitation of Mixed Nitrides and Role of the Cr/Mo-Ratio

Microstructural Evaluation of Salt Nitrocarburizing as a Function of Time

Julio Alberto Juarez-Islas; Mario Fabian Mendez

heat-treating 2015; 625-630https://doi.org/10.31399/asm.cp.ht2015p0625

View Articletitled, Microstructural Evaluation of Salt Nitrocarburizing as a Function of Time

Vacuum Processes and Technology

New Applications for Synchronized Vacuum Heat Treatment

Volker Heuer; Klaus Löser; Bill Gornicki

heat-treating 2015; 631-638https://doi.org/10.31399/asm.cp.ht2015p0631

View Articletitled, New Applications for Synchronized Vacuum Heat Treatment

Minimizing Alpha Case during Vacuum Furnace Heat Treating

Donald Jordan

heat-treating 2015; 639-643https://doi.org/10.31399/asm.cp.ht2015p0639

View Articletitled, Minimizing Alpha Case during Vacuum Furnace Heat Treating

Dynamic Fluoride Ion Cleaning as a Pre-Braze Process

Robert E. Kornfeld

heat-treating 2015; 644-648https://doi.org/10.31399/asm.cp.ht2015p0644

View Articletitled, Dynamic Fluoride Ion Cleaning as a Pre-Braze Process

Low Pressure Carburizing in a Vacuum Furnace

Thomas Lord

heat-treating 2015; 649-652https://doi.org/10.31399/asm.cp.ht2015p0649

View Articletitled, Low Pressure Carburizing in a Vacuum Furnace

Maximizing Quenching and Cooling in Vacuum Heat Treating

Thomas Wingens

heat-treating 2015; 653-662https://doi.org/10.31399/asm.cp.ht2015p0653

View Articletitled, Maximizing Quenching and Cooling in Vacuum Heat Treating

Poster Session

Comparative Impact Behavior of High C Steel after Conventional Quenching and Tempering and Austempering

Jan Vatavuk; George E. Totten; José E. Nucci; Luigi L.M. Albano; Lauralice de C.F. Canale

heat-treating 2015; 663-669https://doi.org/10.31399/asm.cp.ht2015p0663

View Articletitled, Comparative Impact Behavior of High C Steel after Conventional Quenching and Tempering and Austempering

Modeling and Optimization of Metal Induction Heating before Hot Forming and Heat Treatment

Yuliya Pleshivtseva

heat-treating 2015; 670-675https://doi.org/10.31399/asm.cp.ht2015p0670

View Articletitled, Modeling and Optimization of Metal Induction Heating before Hot Forming and Heat Treatment

Effect of Heating Rate on the Microstructure and Fatigue Properties of 2524 Aluminum Alloy

Cong Tang; Danqing Yia; Bin Wanga; Huiqun Liua; Fanghua Shena; Zhe Tiana

heat-treating 2015; 676-681https://doi.org/10.31399/asm.cp.ht2015p0676

View Articletitled, Effect of Heating Rate on the Microstructure and Fatigue Properties of 2524 Aluminum Alloy

Influence of Sintering Atmosphere in the Hardness and Corrosion Resistance of 17-4 PH Stainless Steel Shaped from Powder Injection Molding Process

Willian Januário de Freitas; Gustavo Satoru Takeya; Luiz Carlos Casteletti; George Edward Totten

heat-treating 2015; 682-685https://doi.org/10.31399/asm.cp.ht2015p0682

View Articletitled, Influence of Sintering Atmosphere in the Hardness and Corrosion Resistance of 17-4 PH Stainless Steel Shaped from Powder Injection Molding Process

Boroaustempering Treatment on Alloyed Ductile Irons

Fábio Edson Mariani; Gustavo Satoru Takeya; Luiz Carlos Casteletti; Amadeu Lombardi Neto; George Edward Totten

heat-treating 2015; 686-691https://doi.org/10.31399/asm.cp.ht2015p0686

View Articletitled, Boroaustempering Treatment on Alloyed Ductile Irons

Wear Properties of a Gray Cast Iron Coated with Niobium Carbide Produced by Pack Process

Fábio Edson Mariani; Gustavo Bortoluci de Assis; Luiz Carlos Casteletti; Amadeu Lombardi Neto; George Edward Totten

heat-treating 2015; 692-695https://doi.org/10.31399/asm.cp.ht2015p0692

View Articletitled, Wear Properties of a Gray Cast Iron Coated with Niobium Carbide Produced by Pack Process

Study of Boriding Kinetics for Alloyed Ductile Irons

Fábio Edson Mariani; Galtiere Correa Rego; Luiz Carlos Casteletti; Amadeu Lombardi Neto; George Edward Totten

heat-treating 2015; 696-701https://doi.org/10.31399/asm.cp.ht2015p0696

View Articletitled, Study of Boriding Kinetics for Alloyed Ductile Irons

Influence of Boriding Treatment on the Oxidation Resistance of the AISI H13 Tool Steel

Stenio Cristaldo Heck; Gustavo Satoru Takeya; Luiz Carlos Casteletti; Amadeu Lombardi Neto; George Edward Totten

heat-treating 2015; 702-705https://doi.org/10.31399/asm.cp.ht2015p0702

View Articletitled, Influence of Boriding Treatment on the Oxidation Resistance of the AISI H13 Tool Steel

Heat Treatment of Precipitation-Hardening Stainless Steels Alloyed with Niobium

Luiz Carlos Casteletti; Fábio Edson Mariani; Amadeu Lombardi Neto; André Itman Filho; George Edward Totten

heat-treating 2015; 706-710https://doi.org/10.31399/asm.cp.ht2015p0706

View Articletitled, Heat Treatment of Precipitation-Hardening Stainless Steels Alloyed with Niobium

Volume Information

Organizing Committee and Reviewers

heat-treating 2015; iii-ivhttps://doi.org/10.31399/asm.cp.ht2015fm01

View Articletitled, Organizing Committee and Reviewers