This article addresses the important variables in erosion, such as particle impact velocity; particle impact angle; particle size, shape, and material; and ambient temperature. It describes four erosion test methods: the gas-blast method, a method using a centrifugal accelerator test rig, the wind-tunnel test, and the whirling arm test. The article also details the various test methods used to measure impact velocity of particle and data analysis and interpretation of these four methods.

This article describes the chemistry of phenolic resins and reviews their characteristics and properties for various composites fabrication processes. The fabrication processes include solution/hot-melt process, pultrusion, vacuum infusion, filament winding, sheet molding, and hand lay-up. The article illustrates the manufacturing process of phenolic honeycomb and provides information on the applications of phenolic composites.

Standardization, repeatability, convenience, short testing time, and simple measuring and ranking techniques are desirable in wear and erosion tests. This article provides a brief review of the wear testing methods and wear and erosion test equipment. General elements of a wear test, namely, simulation, acceleration, specimen preparation, control, measurement, and reporting, are reviewed.

High-temperature-resistant polymers are used in aerospace, electronic, and other applications that demand outstanding elevated-temperature physical and mechanical properties. This article discusses the general characteristics of condensation-type polyimides and polymerization of monomer reactants (PMR) polyimides. It provides information on the applications of PMR-15 with illustrations.

Liquid impingement erosion has been defined as progressive loss of original material from a solid surface due to continued exposure to impacts by liquid drops or jets. This article focuses on the core nature of erosion by liquid impingement, due to the greater appreciation of the distinctions between the different forms of erosion. It discusses steam turbine blade erosion, aircraft rain erosion, and rain erosion of wind turbine blades. The article describes the mechanisms of liquid impact erosion and time dependence of erosion rate. It reviews critical empirical observations regarding both impingement variables (velocity, impact angle, droplet size, and physical properties of liquids) and erosion resistance of materials, including the correlation between erosion resistance and mechanical properties and the effects of alloying elements and microstructure. The article also provides information on the ways to combat erosion.

This article is a compilation of definitions for terms related to engineering materials, including plastics, elastomers, polymer-matrix composites, adhesives and sealants, ceramics, ceramic-matrix composites, glasses, and carbon-carbon composites.

This article reviews the phase diagrams, alloy with third element additions, layer growth, critical current density, and matrix materials of A15 superconductors. It describes the production methods of tape conductors (chloride deposition, and surface diffusion) and multifilamentary wires (rod process, modified jelly roll process, niobium tube process, in-situ process, powder metallurgy process, and jelly roll method). The article focuses on reaction heat treatment, which is required at the end of wire processing to convert the ductile components to the desired, but brittle, superconductor. Finally, it discusses the applications of A15 superconductors in commercial magnets, power generation, power transmission, high-energy physics, and fusion.

Material jetting (MJ) is a classification of additive manufacturing processes that involves the selective jetting and subsequent solidification of liquid droplets onto a substrate in a layerwise manner. This article focuses solely on MJ of polymers, providing a process overview and describing the functional characteristics that distinguish it from other AM technologies. It provides information on the properties and design considerations of both build and support materials. Process-related effects on final part properties and overall quality, as well as corresponding design considerations are also covered. The article also discusses the applications and future scope of polymer MJ systems.

This article provides an overview of the types of weld discontinuities that are characteristic of specialized welding processes. These welding processes include electron-beam welding, plasma arc welding, electroslag welding, friction welding, resistance welding, and diffusion welding. The article also describes the common inspection methods used to detect these discontinuities.

Complete vehicle accelerated corrosion testing on the proving ground is a mandatory testing tool among vehicle manufacturers around the globe. This article focuses on creating some awareness of the difficulty in applying reliable corrosion tests for all corrosion-sensitive automotive systems at once. It describes the various factors for a complete vehicle testing, including wear from road grit, dirt, salt load, elevated temperatures, and mechanical effects such as chafing and fretting. The article discusses the four main test blocks, namely, driving sequence on various proving ground tracks, exposure of the vehicle in one or more ways to road deicing salts, static exposure to forced climatic conditions, and additional elements such as operating the mechanical systems of the vehicle, car washes, and so forth. It concludes with information on the major advantages and drawbacks of a full-service-life test.

This article provides an overview of the various types of unsaturated polyester resins and low-profile additives. The resins include general-purpose resins, isophthalic resins, bisphenol A fumarate resins, chlorendic resins, and vinyl ester resin. The article describes the mechanical and electrical properties, thermal and oxidative stability, and chemical and ultraviolet (UV) resistance of polyester resins. It concludes with a discussion on the flame-retardant polyester resins.

Vat polymerization (VP) is an additive manufacturing (AM), or three-dimensional (3-D) printing process in which 3-D objects are produced by hardening a liquid polymer into the desired shape. With the introduction of new materials and improvements in material properties, VP offers a good alternative for AM for low-volume production. This overview of the VP process begins with an introduction to two main processes of VP, namely stereolithography apparatus and digital light processing, and then moves on to discuss the characteristics of the feedstocks used as well as their selection criteria. The article then covers safety issues associated with feedstock handling and the manufacturing constraints related to part orientation and design, providing some key tips for VP support structures. This is followed by a discussion on postprocessing/finishing of VP parts. A brief concluding section considers some special topics related to AM process.

This article provides information on the thermoplastic resins used as matrix materials for continuous fiber reinforced composites. It focuses on the materials that are suitable for fabrication of structural laminates and used for aerospace applications. The article provides a discussion on the background, categories, characteristics, product forms, properties, cost benefits, and processing techniques of thermoplastic resins. Strategies that have been advanced to deal with impregnation difficulties are also discussed.

This article discusses the elements necessary for a galvanic cell operation. Detailed information on the possible corrosion reaction as a function of aqueous electrolyte concentration and pH, in the presence of certain ions, are provided using Pourbaix diagrams. A variety of atmospheric factors, climatic conditions, and air-chemical pollutants that determine the corrosiveness of the atmosphere and contribute to the metal corrosion process are discussed. The article reviews the phenomenon of precipitation runoff on the corroded metal surface and the corrosive microbial effect on metals. It describes the thermodynamics of atmospheric corrosion and models for predicting the corrosion damage of metals. The article concludes with information on the various trends in atmospheric corrosion research and methods for the corrosion processes.

This article provides the framework for the investigation of bridge failures. It explains the types of bridge loading and presents the regulatory provisions for bridges. Some bridge failures in the U.S. that resulted in significant changes in bridge manufacturing, design, regulation, and/or maintenance are also discussed. In addition, the article provides information on traffic damage and fatigue cracking that result in bridge failures. The need for steels with better fracture toughness in bridge design is also discussed.

In terms of their electrical properties, plastics can be divided into thermosetting and thermoplastic materials, some of which are conductive or semiconductive. This article provides detailed information on factors that affect the property of plastics. It discusses the major test methods used to determine the following dielectric properties of plastics: dielectric breakdown voltage, dielectric strength, dielectric constant, dissipation factor, arc tracking resistance, insulation resistance, volume, and surface resistivity or conductivity. The test specifications and conditions, recommended by several U.S. and foreign testing organizations for characterizing the electrical properties of plastic materials are listed. The article describes the influence of these properties on selection of plastics for insulation application. An outline of the electromagnetic shielding and testing methods of electromagnetic interference are also provided. Designations, electrical properties, and applications of elastomers are tabulated.

A thermosetting resin, or thermoset, is a synthetic organic polymer that cures to a solid, infusible mass by forming a three-dimensional network of covalent chemical bonds. Significant applications include construction and thermoset engineering plastics. This article discusses the general and family characteristics of thermosetting resin families, including allyls, aminos (urea formaldehyde and melamine formaldehyde), cyanates, epoxies, polybenzimidazoles, unsaturated polyesters, thermoset polyimides, phenolics, and vinyl esters. It also explains processing methods, including curing and curing agents. The article provides descriptions of commercial product forms and the wide array of applications of thermosetting resins. It also tabulates the performance properties (mechanical, thermal, electrical and chemical resistance) of some families of unfilled or unreinforced thermosetting resins and reinforced or filled grades.