Search Results for wear test methods

Wear is mechanically-induced surface damage that results in the progressive removal of material. Because different types of wear occur in machinery, many different types of wear tests have been developed to evaluate its effects on materials and surface treatments. This article provides an explanation on mechanisms, forms (sliding, impact, and rolling) and the causes of wear. It describes the wear measuring methods, including the mass loss method, wear width method, and scar depth method. The units used to report wear vary with type of wear and with the purpose for which the data are to be used. Listing the considerations of tribosystem analysis, the article provides information on selection of ASTM wear test methods grouped by wear type. The article concludes by tabulating the testing geometries and parameters that are commonly controlled and reported when conducting wear tests.

Standardization, repeatability, convenience, short testing time, and simple measuring and ranking techniques are desirable in wear and erosion tests. This article provides a brief review of the wear testing methods and wear and erosion test equipment. General elements of a wear test, namely, simulation, acceleration, specimen preparation, control, measurement, and reporting, are reviewed.

Tribology is the science and technology of interacting surfaces in relative motion or, the study of friction, wear, and lubrication. This article focuses on friction and wear processes that aid in the evaluation and selection of materials, for polymers and some composites used in friction and wear applications. It provides information on friction, types of wear, and lubrication. The article includes a brief description of the friction and wear test methods, laboratory-scale friction, and wear testing, usually performed either to rank the performance of candidate materials for an application or to investigate a particular wear process. It describes the wear tests conducted with/without abrasives and explains the concept of PV limit (where P is contact pressure and V is velocity). The article concludes with references and tables of friction and wear test data for polymeric materials.

This article discusses the tests designed specifically to evaluate the adhesion, friction, and wear behavior of various material systems. It tabulates the characteristics of common types of wear and mechanical surface damage. The article also considers the displaying and analyzing of adhesion, friction, and wear test data. It concludes with a description of devices used for testing adhesion, friction, and wear.

This article describes the two commonly used standardized tests for determining the mechanical properties of thermal spray coatings: hardness testing and tensile adhesion testing. It discusses the destructive and non-destructive methods of residual-stress measurement. Electrochemical testing methodologies include two distinctly different methods: direct and alternating current impedance techniques for assessing the corrosion resistance of coating attributes. The article also reviews the testing methods for determining thermomechanical and environmental stability of thermal barrier coatings. It discusses the wear testing methodologies that are standardized by ASTM, including the pin-on-disk, block-on-ring, dry sand/rubber wheel, erosion, metallographic apparatus abrasion, fretting wear, cavitation, reciprocating ball-on-flat, impact, and rolling contact fatigue test. The article concludes with a discussion on the methods of testing abradability and erosion resistance in abradable coatings.

Radionuclide methods for wear measurement are used to measure wear continuously throughout a tribological experiment at a resolution of nanometers or micrograms per hour. This article presents an overview of radionuclide methods for wear measurement. It discusses complementary wear measurement methods to introduce the advantages of using radioactive isotopes (RI) for wear or corrosion measurements in comparison to other methods. The article provides information on radiation safety regulations and approaches to minimize external radiation exposure. It describes neutron activation, thin layer or surface layer activation, and ultrathin layer or recoil activation that are used to create radioactive isotopes in the samples to be tested. The article reviews the two common types of wear measurement setup configurations: the direct method and the indirect method. It concludes with a discussion on the practical application of wear measurement using radioactive isotopes.

Cemented carbides, best known for their superior wear resistance, have a range of industrial uses more diverse than that of any other powder metallurgy product including metalworking and mining tools and wear-resistant components. This article discusses raw materials and manufacturing methods used in the production of cemented carbides, the physical and mechanical properties of carbides, and wear mechanisms encountered in service. Emphasis is placed on tungsten carbide-cobalt (WC-Co) or tungsten carbide-nickel (WC-Ni) materials as used in nonmachining applications. Nominal composition and properties of representative cemented carbide grades and their applications are listed in a table.

This article provides an overview of two major classes of bearings: rolling bearings and sliding, or plain, bearings. It reviews the experimental data resulted from testing of rolling and sliding bearing materials with illustration. The article presents a table that summarizes rolling contact fatigue test methods that ASTM published in STP 771. It also describes the role of lubrication in the bearings.

Surface damage from sliding contact is related to the adhesion of mating surfaces in contact. This article describes the methods for evaluation of surface damage caused by sliding contact. It defines adhesive wear in terms of asperity, cold welding, galling, scuffing, seizure, and wear coefficient. The article discusses various galling testing methods, such as button-on-block galling test, pin-on-flat galling test, and threaded connection galling test. It provides an overview of fretting wear that occurs between two tight-fitting surfaces subjected to a cyclic, relative motion of extremely small amplitude. The article also reviews the fretting rig for investigating fretting wear.

This article describes the techniques for measuring friction, namely, inclined-plane method; friction test methods using weights and pulleys; friction tests of shafts and capstans; other types of friction tests, including standards; microscale friction tests; and friction testing under well-lubricated conditions. The procedural considerations that should be addressed to ensure that valid data are derived from a friction test are discussed. The article explains friction testing geometries, the major considerations implicit in their use as well as friction test parameters, such as speed and load. It also demonstrates how to report friction data and how these data can be entered into a database.

The surface of irons and steels can be hardened by introducing nitrogen (nitriding), nitrogen and carbon (nitrocarburizing), or nitrogen and sulfur (sulfonitriding) into the surface. This article lists the principal reasons for nitriding and nitrocarburizing, and summarizes the typical characteristics of nitriding processes along with a general comparison of carburizing processes in a table. It describes the two most common nitriding methods: gas nitriding and ion (plasma) nitriding. The article discusses the wear behavior of nitrided layers and the wear resistance of selected steels. Rolling-contact fatigue (RCF) occurs in rolling contacts such as bearings, rolls, and gears. The article provides a discussion on rolling-contact fatigue of nitrided steels for aerospace bearing components.

Tribology is the study of contacting materials in relative motion and more specifically the study of friction, wear, and lubrication. This article discusses the classification and the mechanisms of friction, wear, and lubrication of polymers. It describes the tribological applications of polymers and the tribometers and instrumentation used to measure the tribological properties of polymers. The article discusses the processes involved in calculating the wear rate of polymers and the methods of characterization of the sliding interface. It provides information on the pressure and velocity limit of polymer composites and polymer testing best practices.

This article focuses on the types of activities required for the resolution of wear problems. These include examining and characterizing the tribosystem; characterizing and modeling the wear process; obtaining and evaluating wear data; and evaluating and verifying the solution.

The article provides a discussion on the parameters influencing abrasive wear and the elements and standards of abrasion wear tests. It emphasizes the general test procedures, advantages, and limitations of various types of abrasive wear testing. Wear testing for scratch wear, dry abrasion against fixed particles, dry abrasion against loose particles, wet abrasion against fixed or loose particles, gouging-abrasion, small particle erosion, impact abrasion, slurry abrasion, and microabrasion, are also discussed.

This article discusses the factors to be considered in selecting and evaluating machining tests for the purpose of evaluating cutting tool performance and workpiece machinability. It provides a brief description of cutting tool materials, such as high-speed steels, uncoated and coated carbides, cermets, ceramics, cubic boron nitride, and polycrystalline diamond. The article considers the matrices that represent the range of tests performed on candidate cutting tool materials: the workpiece matrix, the property matrix, and the operation matrix. Various machine tests used to evaluate cutting tools, including the impact test, turning test, and facing test, are described. The article lists the factors to be taken into consideration in measuring the machinability of a material. The article presents general recommendations for proper chip groove selection on carbide tools and concludes with information on machining economics.

The influence of friction and wear on the function and structure of tribological systems is determined by various types of tribological tests. This article introduces the general categories of tribological testing and describes the basic objectives of testing. It reviews the results of tribological tests, where the system-dependent characteristics of friction and wear data can be expressed in different forms, such as tribographs, transition diagrams, and tribomaps. A summary of various methods of surface analysis is presented in a table. The article discusses the relationship between wear and reliability in terms of exponential distribution, Weibull distribution, and gamma distribution. It concludes with information on the effects of interaction on failure probability.

This article addresses the important variables in erosion, such as particle impact velocity; particle impact angle; particle size, shape, and material; and ambient temperature. It describes four erosion test methods: the gas-blast method, a method using a centrifugal accelerator test rig, the wind-tunnel test, and the whirling arm test. The article also details the various test methods used to measure impact velocity of particle and data analysis and interpretation of these four methods.

This article describes the determination of wear loss by measuring either mass change or dimensional change of lubricants and materials. It discusses the principles, advantages and disadvantages of mass loss measures and dimensional measures of wear. The article details wear measurement at the nanoscale, such as atomic force microscopy (AFM) measurement and scanning electron microscopy measurement. It reviews the techniques of wear measurement at the atomic level, namely, transmission electron microscopy (TEM) measurement and AFM combined with TEM measurement.