Composite tooling is the making of tools from composite materials. This article focuses on wet lay-up methods and techniques that are used to fabricate prepreg tooling. It discusses the advantages and disadvantages of composite tools. The article describes the process considerations for composite tool design, such as master model or pattern design selection, fiber and fabric selection, resins, and surface coat and ply. Various tool laminate construction techniques, such as curing and demolding, and cutting and trimming, are reviewed. The article also describes the substructure design for the construction of tool laminates.

This article focuses on the design process, materials, and manufacturing techniques for one-off and low-volume production sailing craft. These include racing yachts of typically 10-20 m length for short coastal events, 20-25 m ocean racers, 24 m America's Cup racing craft, multihull racers of 35 m or more, and large luxury cruising craft. The article discusses the tooling, laminating practice, curing, mold removal, and quality control, for manufacturing hulls, decks, masts, and appendages using composites.

This article describes common design criteria and identifies the design considerations that have a significant effect on the end product. The design criteria include cost, size, mechanical properties, repeatability and precision of parts, damage tolerance and durability, and environmental constraints.

This article presents the basic guidelines considered in designing a composite structure, and the basic definitions of terms that apply to composites. It describes the analysis of a composite laminate based on stress-strain relationships, stress-strain load relationships, general load displacement case, and general load case solution. Factors affecting the composite materials properties and allowables of fiber-reinforced polymers are reviewed. The article discusses the process considerations for mold design, such as master model, metal tooling, composite tooling, and tool care. It explains the resin selection in designing the composite for use in a particular application. The article illustrates the various methods that are used to process a composite component, namely, wet lay-up, autoclave, resin transfer molding, and vacuum-assisted resin transfer molding. It provides a discussion on electromagnetic interference shielding, electrostatic discharge protection, metal plating, fire resistance, and corrosion resistance on composite materials.

The prepreg hand lay-up process is a versatile, reliable, cost-effective, and high quality process for fabricating large or small components. This article discusses the technique characteristics and applications of the process. It describes the stages involved in the process of lay-up, namely, lay-up definition, ply-kit cutting, layup, debulking, and preparation for curing. The article concludes with a discussion on the component properties and design guidelines of the prepreg hand lay-up process.

This article discusses the presses, auxiliary equipment, and dies used in the blanking and piercing of commonly used magnetically soft materials, namely, low-carbon electrical steels and oriented and nonoriented silicon electrical steels. It describes the effect of stock thickness and work metal composition and condition on blanking and piercing. The article provides an overview of the influence of burr height on stacking factors and presents a discussion on the lubrication and core plating of electrical steels that ease the process.

Continuous fiber composite materials offer dramatic opportunities for producing lightweight laminates with tremendous performance capabilities. This article describes the kinematics of fabric deformation and explains the algorithms used in draping simulation. It discusses the basic components, such as laminate and ply, of continuous fiber composite. The article provides information on the core sample and ply analysis. It details producibility, flat-pattern evaluations, and laminate surface offset. The article discusses various interfaces, such as the structural analysis interface, the resin transfer molding interface, the fiber placement and tape-laying interface, and the laser projection interface.

Composite materials offer amazing opportunities for delivering structures that are optimized to meet design requirements. This article provides a summary of the concepts discussed in the articles under the section “Engineering Mechanics, Analysis, and Design” in ASM Handbook, Volume 21: Composites. The section introduces many of the engineering approaches used in composite industry.

Autoclave molding is a process used to impart a controlled heat and pressure cycle cure to a layup. This article describes the materials used for preparing a layup, including peel ply, separator, bleeder, barrier, breather, dam, and vacuum bag. It describes the major elements and functions of an autoclave system, including pressure vessel, gas stream heating and circulation sources, gas stream pressurizing systems, vacuum systems, control systems, and loading systems. The article includes information about modified autoclaves for specialized applications and safety practices in autoclave molding. It also describes the tooling configuration and type of tooling which includes aluminum and steel tooling, electroformed nickel tooling, graphite-epoxy tooling, and elastomeric tooling.

This article reviews the steps involved in presurface-preparation inspection: substrate replacement; removal of weld spatter, rounding of sharp edges, and grinding of slivers/laminations; and removal of rust scale, grease, oil, and chemical (soluble salt) contamination. It focuses on surface preparation methods that range from simple solvent cleaning to hand and power tool cleaning, dry and wet abrasive blast cleaning, centrifugal wheel blast cleaning, chemical stripping, and waterjetting for the application of the coating system. In addition, the article provides a description of the Society for Protective Coatings' (SSPC) standards and NACE International standards as well as the International Organization for Standardization (ISO) standards and International Concrete Repair Institute (ICRI) guidelines for surface cleanliness.

This article presents the importance of progressing from post-manufacturing inspection/verification to in-process inspection/verification methods. It lists the various quality assurance factors considered for typical composite laminate lay-up process. The article provides information on composite cure tooling that is fabricated from steel, aluminum, or high-temperature composite materials. The quality assurance for commercial applications is reviewed. The article concludes with a discussion on data fusion systems designed to provide nondestructive analysis data from fabrication and assembly processes for each individual composite part.

Curing is the irreversible change in the physical properties of a thermosetting resin brought about by a chemical reaction, condensation, ring closure, or addition. This article discusses the material types and functions of various components considered in the preparation for curing. It presents a discussion on the major elements of an autoclave system, namely, pressure vessel, gas stream heating and circulation sources, gas stream pressurizing systems, loading systems, and vacuum systems. The article describes a computerized approach to the simultaneous control of materials reaction behavior and consolidation dynamics, using an autoclave as the reaction vessel.

Successful adhesive bonding of organic-matrix composites is dependent on the nature of the adherend surfaces. This article emphasizes the critical importance of proper surface preparation in both thermoset and thermoplastic composites. It provides information on surface preparation for thermoset composite adherends along with a standard technique (water-break test) for verifying the adequacy of surface preparation for metal bonding. In addition, the article provides examples of good and bad adhesive bonds and describes some important process variables that are considered and controlled in bonding process for thermoset adhesives. The article concludes with a discussion on three different approaches for bonding thermoplastic composite composite panels together.

Automated tape laying is a mature process used in both commercial and military aircraft applications. This article provides a brief history of the process and describes the use of commercially available flat and contour tape-laying equipment. It discusses the advantages and disadvantages of the tape laying. The article describes the various components of a ten-axis gantry-type tape laying machine and the tape laying process. It provides a discussion on typical material types and forms for tape laying and provides information on design guidelines for tape laying.

This article reviews various rapid prototyping (RP) processes such as stereolithography, powder sintering, hot melt extrusion, sheet lamination, solid ground curing, and three-dimensional printing. It discusses the various material prototypes produced by RP technology. The list of materials includes particulate and fiber-reinforced polymers, ceramic-matrix composites, and metal-matrix composites. The article also provides information on freeform-fabrication techniques for composite part lay-up.

Resin transfer molding and structural reaction injection molding belong to a family, sometimes denoted as liquid composite molding. This article provides information on the characteristics and automotive and aerospace applications of liquid composite molding. It reviews techniques that use hard tooling and positive (superatmospheric) pressures to produce structures. The techniques include vacuum-assisted resin injection, vacuum infusion, resin-film infusion, and injection-compression molding. The article provides an overview of the materials that are commonly used together with some of processing characteristics that are important to processing speed and part quality. It concludes with a discussion on design guidelines for the liquid composite molding.

This article discusses the attempts made by the industry to create sensing approaches for modeling a process, part, and chemistry and kinetics. It reviews microwave curing of thick-section composites and the resin cure sensors that are used for resin cure monitoring. These include dielectric cure sensors, fiberoptics-based resin cure sensors, ultrasonics-based resin cure sensors, and dosimetry-based resin cure sensors. The article provides information on the resin cure control flow sensing, flow modeling, flow mapping, and resin flow. It addresses some practical issues in sensing resin cure and flow.

This article discusses the requirements for designing repairable composite structures such as a honeycomb sandwich panel construction and integrally stiffened co-cured composite structures. It reviews the general and specific design guidelines for bolted or riveted repairs and adhesively bonded repairs of the composite structures. The article presents several examples to illustrate how these repairs can be achieved.

Elastomeric tooling uses rubber details to generate required molding pressure or to serve as a pressure intensifier during composite part curing cycles. This article discusses the various aspects of the forms of commercially available bag-side elastomeric caul systems. It describes the two basic methods, such as the trapped or fixed-volume rubber method and the variable-volume rubber method, of elastomeric tooling, which use the principles of thermal expansion molding. The significant properties and controlling equations that are required to characterize elastomeric tooling material are also discussed.