Search Results for time-temperature cooling curves

The term isomorphous refers to metals that are completely miscible in each other in both the liquid and solid states. This article discusses the construction of simple phase diagrams by using the appropriate points obtained from time-temperature cooling curves. It describes the two methods to determine a phase diagram with equilibrated alloys: the static method and the dynamic method. The article illustrates the construction of phase boundaries according to the Gibbs' phase rule and describes the calculation methods that allow the prediction of the phases present, the chemical compositions of the phases present, and the amounts of phases present. Phase diagrams provide useful information for understanding alloy solidification. The article provides two simple models that can describe the limiting cases of solidification behavior.

Thermal analysis is used to analyze solidification processes by recording the temperature as a function of time during cooling or heating of a metal or alloy to or from a temperature above its melting point. This article describes the use of cooling curves for analyzing a solidification process, such as the solidification temperature, structure analysis, fraction of phases and heat of fusion with focus on solidification of cast iron, and the use of cooling curves to control and adjust the casting conditions. It discusses deviations from equilibrium that occur due to kinetic effects during solidification. The article also illustrates the evaluation of fraction of solid formed during the precipitation of austenite from heat balance.

Successful hardening depends on the hardenability of steel composition, the geometry of parts, the quenching system, and on the heat treating process used. This article provides a brief overview of the computation and use of quench factor analysis (QFA) to quantify as-quenched hardness for carbon and low-alloy steels. As a single-value parameter alternative to Grossmann H-values, QFA is a potential method to qualify a quenching medium or process or to effectively monitor variation of quench severity due to either the quenchant or the system. The article describes the procedures for experimentally determining the quench factors by using a type 304 austenitic stainless steel probe. Typical examples of the utilization of QFA for quenchant characterization are provided. The article also describes the methods for experimentally generating time-temperature-property curves.

In this article, a metallurgical overview of the hardening process is provided. This overview is followed by the methodology involved in obtaining cooling curves, the currently accepted standardized methods of testing, and the use of newer methods of cooling curve data interpretation that describe the quenching process.

This article provides an overview of common quenching media, the factors involved in the mechanism of quenching, and process variables, namely, surface condition, mass and section size of the workpiece, and flow rate of the quenching liquid. It describes the methods of quenchant characterization using hardening-power and cooling-power tests. The article discusses the fundamentals involved in heat-transfer coefficient and heat flux of quenching processes. This discussion is followed by various actual examples of applications of these methods using simplified equations. Quenchant evaluation, classification, selection, and maintenance are reviewed in detail. The article addresses the various reasons for quench oil variability and complications due to aging and contamination.

Thermal analysis is a classical method of determining phase diagrams and can be used to analyze the deviation from solidification under equilibrium conditions. This article discusses the use of thermal analysis in industrial processes and in research. It describes the theoretical basis of simplified and differential thermal analysis. Techniques for determining liquidus and solidus temperatures using cooling curves are also discussed.

Inverse hardening a steel of adequate hardenability requires a workpiece of sufficiently large cross section, an appropriate cooling medium, and the right quenching conditions. This article explains the Temperature Gradient Quenching Analysis System (TGQAS), which can measure, record, and evaluate all quenching processes in common use, describing their heat extraction dynamics by corresponding thermodynamic functions. It discusses the metallurgical aspects of steels with an emphasis on two different processes, namely, heat extraction (a thermodynamic process) and microstructural transformation (a metallurgical process) that are initiated at the moment when the austenitized workpiece is immersed in the quenchant. The article describes the uses of polyalkylene glycol copolymer and the effect of hardness and fatigue resistance on AISI 4140 type steel.

This article focuses on the cooling process and related transformation behavior of steel wires during patenting to identify a physical metallurgical basis for the development of nontoxic alternatives to molten lead for wire patenting. It describes the materials required, the procedures, and the results of cooling curve analysis. The article schematically summarizes the cooling behaviors of the various cooling media and the microstructure of the pearlite transformation in a lead bath.