Search Results for sulfuric acid process

Anodizing refers to conversion coating of the surface of aluminum and its alloys to porous aluminum oxide. This article provides the reasons for performing anodizing and discusses the three principal types of anodizing processes, namely, chromic acid process, sulfuric acid process, and hard anodic process. It describes the limitations imposed by variables, such as alloy composition, surface finish, prior processing, temper or heat treatment, and the use of inserts, on the anodizing processes. The article explains the causes and means adopted for correcting several specific problems in anodizing aluminum. It also discusses the process control techniques and equipment used for anodizing. The article reviews the sealing processes for anodic coatings and the method for coloring the coatings. It concludes with a discussion on the effects of anodic coatings on the surface and mechanical properties of aluminum and its alloys.

Pickling is the most common of several processes used to remove scale from steel surfaces. This article provides a discussion on pickling solutions, such as sulfuric and hydrochloric acid, and describes the role of inhibitors in acid pickling. It discusses the equipment and processes involved in the batch, continuous, and electrolytic pickling of carbon steel components. The article describes the effects of process variables on scale removal in sulfuric and hydrochloric acid. It concludes with a description of pickling defects, spent pickle liquor disposal, and safety practices.

This article discusses surface engineering of nonferrous metals including aluminum and aluminum alloys, copper and copper alloys, magnesium alloys, nickel and nickel alloys, titanium and titanium alloys, zirconium and hafnium, zinc alloys, and refractory metals and alloys. It describes various techniques to improve functional surface properties and enhance the appearance of product forms. The article discusses various cleaning and finishing techniques such as abrasive blast cleaning, polishing and buffing, barrel burnishing, chemical cleaning, pickling, etching and bright dipping, electrochemical cleaning, mechanical cleaning, and mass finishing. It also examines coating processes such as plating, anodizing, chemical conversion coating, and thermal spray, and concludes with a discussion on oxidation-resistant coatings for refractory metals.

Etching aluminum can be a pretreatment step for anodizing, chemical conversion coating, metal-to-rubber bonding, and a host of other processes. Chemical etching, using either alkaline or acid solutions, produces a matte finish on aluminum products. This article describes the alkaline etching and acid etching of aluminum. Alkaline etching reduces or eliminates surface scratches, nicks, extrusion die lines, and other imperfections. Acid etching can be done without heavy smut problems, particularly on aluminum die castings. Hydrochloric, hydrofluoric, nitric, phosphoric, chromic, and sulfuric acids are used in acid etching. The article presents a flow chart of the operations used in acid etching.

Mixtures of acids or acids and salts are of great importance to the chemical process industry (CPI) for use in digestion of solids, as a promoter in reactions, as a scale remover, and as a complexant. This article emphasizes the assessment of the performance of Ni-Fe-Cr-Mo alloys in mixed acids and salts in an objective manner. It tabulates the nominal compositions of pertinent Ni-Fe-Cr-Mo corrosion-resistant alloys. The article describes the acid and acid-plus-salt mixtures classified into the following general categories: nonoxidizing acid mixtures (H 2 SO 4 +H 3 PO 4 ), nonoxidizing acids with halides (H 2 SO 4 +HCl), oxidizing acid mixtures without halides (H 2 SO 4 +HNO 3 ), and oxidizing acid mixtures with halides (HNO 3 +HF). It also illustrates the effect of alloying elements on the corrosion rate in the nonoxidizing mixtures and oxidizing acid mixtures.

Chemical brightening (bright dipping) and electrolytic brightening (electropolishing) are essentially selective-dissolution processes, in which the high points of a rough surface of aluminum are attacked more rapidly than the depressions, and the peaks and valleys are smoothed to produce a bright and beautiful finish. This article discusses the metallurgical factors, optical factors, and applications of the chemical and electrolytic brightening. It compares the chemical brightening and electrolytic brightening, and presents the advantages of the chemical and electrolytic brightening processes in terms of performance and economy. The article describes the phosphoric-nitric acid baths and phosphoric-sulfuric acid baths used for chemical brightening. Solution compositions and operating conditions for three commercial electropolishing processes, as well as for suitable post-treatments, are presented in a table.

The sealing of the anodized aluminum is a critical process in achieving the durability and extended functionality of anodizing. This article discusses the different methods for sealing the anodic coatings produced by using sulfuric acid, namely, hot deionized water, hot nickel acetate, midtemperature, cold, and dichromate sealing. It reviews the factors that affect seal quality: immersion time, chemistry concentration, temperature, pH, water quality, coating thickness, and contaminants/dye bleeding. The article describes the various tests that are used for determining the quality of the seal, namely, salt spray, modified dye stain, acid dissolution, impedance, copper accelerated acetic acid salt spray, high-alkaline resistance, SO 2 fog, and clorox tests.

This article describes the processes involved in the production of hafnium and its alloys. It discusses the physical, mechanical and chemical properties of hafnium. The aqueous corrosion testing of hafnium and its alloys is detailed. The article reviews the corrosion resistance of hafnium in specific media, namely, water, steam, hydrochloric acid, nitric acid, sulfuric acid, alkalis, organics, molten metals, and gases. Forms of corrosion, namely, galvanic corrosion, crevice corrosion, and pitting corrosion are included. The article explains the corrosion of hafnium alloys such as hafnium-zirconium alloys and hafnium-tantalum alloys. It also deals with the applications of hafnium and its alloys in the nuclear and chemical industries.

Natural and synthetic rubber linings are used extensively in many industries for their corrosion and/or abrasion resistance. These industries include transportation, chemical processing, water treatment, power, mineral processing, and mining. This article provides information on soft natural rubber, semihard natural rubber, hard natural rubber, neoprene or polychloroprene, chlorobutyl, three-ply linings, nitrile, and ethylene propylene with a diene monomer. Emphasis is placed on advantages, disadvantages, and common uses of each material discussed.

This article presents a general survey of corrosive agents and processes that exist within what are usually considered the protective environments of museums and historic collections. It reviews the corrosion influencing factors, such as humidity, temperature, and light. The article provides a list of pollutants and their sources in museums and collections. It discusses the sources of corrosion, including plastic and wood, sulfur, and carbonyl compounds. The article describes the preservation steps for materials in museum to eliminate the corrosive sources acting on the objects and to avoid other potentially damaging materials.

This article presents a brief history and the uses of the anodic protection technique. It compares anodic and cathodic protection and describes the design considerations of the anodic protection system. The article discusses the specific requirements of equipment required for anodic protection. It also explains the applications and economic aspects of anodic protection, with examples.

This article provides a description of the classification, industrial applications, microstructures, physical, chemical, corrosion, and mechanical properties of zirconium and its alloys. It discusses the formation of oxide films and the effects of water, temperature, and pH on zirconium. The delayed hydride cracking of zirconium is also described. The article provides information on the resistance of zirconium to various types of corrosion, including pitting corrosion, crevice corrosion, intergranular corrosion, galvanic corrosion, microbiologically induced corrosion, erosion-corrosion, and fretting corrosion. The article explains the effects of tin content in zirconium and effects of fabrication on corrosion. Corrosion control measures for all types of corrosion are also highlighted. The article concludes with information on the safety precautions associated with handling of zirconium.

The selection of surface treatments for copper and copper alloys is generally based on application requirements for appearance and corrosion resistance. This article describes cleaning, finishing, and coating processes for copper and copper alloys. These processes include pickling and bright dipping, abrasive blast cleaning, chemical and electrochemical cleaning, mass finishing, polishing and buffing, electroless plating, immersion plating, electroplating, passivation, coloring, and organic coatings.

Anodizing is one of the most common surface treatments of aluminum and is performed for corrosion protection. This article describes the structure and growth characteristics of the types of anodic oxide films such as a barrier-type oxide film and a porous-type anodic oxide film. It discusses each step involved in the anodizing process of an aluminum or aluminum alloy specimen. The anodizing process includes pretreatments (degreasing, etching, and polishing), anodizing, coloring, and sealing. The article provides an observation of the morphology of the anodic oxide films by transmission electron microscopy and the scanning electron microscopy for testing properties of anodic oxide films.

This article describes the selection of materials for the production and handling equipment of concentrated sulfuric acid, depending on factors such as the allowable corrosion rate, desired mechanical and physical properties, fabrication requirements, availability, and cost. Materials such as carbon steel, cast irons, austenitic stainless steels, higher austenitic stainless steels, higher chromium Fe-Ni-Mo alloys, nickel-base alloys, non-metals, and specific other metals and alloys are also discussed.

This article provides useful information on the occurrence of corrosion in crude oil refinery units, namely, crude unit, catalytic and thermal cracking units, hydroprocessing units, amine sweetening units, and sour water units. Types and applications of corrosion inhibitors, namely, neutralizers, filming inhibitors, scavengers, microbiocides, and anti-foulants and scale inhibitors, are reviewed. The article describes the direct and indirect corrosion monitoring methods used to reduce equipment damage due to corrosion events and to assess the reliability and useful service life of process equipment.

This article presents the primary considerations and mechanisms for corrosion and explains how they are involved in the selection of materials for process equipment in refineries and petrochemical plants. It discusses the material selection criteria for a number of ferrous and nonferrous alloys used in petroleum refining and petrochemical applications. The article reviews the mechanical properties, fabricability, and corrosion resistance of refinery steels. It describes low- and high-temperature corrosion, hydrogen embrittlement, and cracking such as stress-corrosion, sulfide stress, and stress-oriented hydrogen-induced cracking. The article considers hydrogen attack, corrosion fatigue, and liquid metal embrittlement and the methods of combating them. It explains the causes of velocity-accelerated corrosion and erosion-corrosion. The article summarizes some corrective measures that can be implemented to control corrosion. The applicable standards for materials used in corrosive service conditions in upstream and downstream petroleum service are presented in a tabular form.

This article provides information on predesign surveys and the various testing procedures associated with wastewater treatment plants. These include soil testing, atmospheric testing, and hydrogen sulfide testing. The primary parameters that influence the production of sulfides within the piping system that transports the wastewater to the treatment facility are discussed. The article describes the corrosion performance of various materials in the soil, fluid, and atmospheric exposures. These include concrete, steel, ductile iron, aluminum, copper, brass, stainless steel, and coatings used for wastewater facilities.

This article begins with a discussion on the components and importance of flue gas desulfurization (FGD) technology used in power plant for pollution control. It further discusses the corrosion problems encountered in different operating zones of FGD system and the major forms of corrosive attack encountered in those zones, including crevice corrosion, pitting corrosion, and acid attack. The article concludes with information on the materials selection and design features for minimizing the possibility of corrosion.