Search Results for structural quality

This article addresses classifications and designations for carbon and low-alloy steel sheet and strip product forms based on composition, quality descriptors, mechanical properties, and other factors. Carbon steel sheet and strip are available as hot-rolled and as cold-rolled products. Low-alloy steel sheet and strip are used primarily for applications that require the mechanical properties normally obtained by heat treatment. The descriptors of quality used for hot-rolled plain carbon steel sheet and strip and cold-rolled plain carbon steel sheet include structural quality, commercial quality, drawing quality, and drawing quality, special killed. The surface texture of low-carbon cold-rolled steel sheet and strip can be varied between rather wide limits. The modified low-carbon steel grades discussed in the article are designed to provide sheet and strip products having increased strength, formability, and/or corrosion resistance. The article also summarizes the key operations involved in the three alternative direct casting processes: thin slab, thin strip, and spray casting.

Hot-rolled steel bars and other hot-rolled steel shapes are produced from ingots, blooms, or billets converted from ingots or from strand cast blooms or billets and comprise a variety of sizes and cross sections. Most carbon steel and alloy steel hot-rolled bars and shapes contain surface imperfections with varying degrees of severity. Seams, laps, and slivers are probably the most common defects in hot-rolled bars and shapes. Another condition that could be considered a surface defect is decarburization. Hot-rolled steel bars and shapes can be produced to chemical composition ranges or limits, mechanical property requirements, or both. Hot-rolled carbon steel bars are produced to two primary quality levels: merchant quality and special quality. Merchant quality is the least restrictive descriptor for hot-rolled carbon steel bars. Special quality bars are employed when end use, method of fabrication, or subsequent processing treatment requires characteristics not available in merchant quality bars.

The production and use of steel plate is aided by a system of standard designations and associated specifications defining composition, property, and performance ranges. This article contains an extensive amount of information on the designations and grades of plate products and how they are made. Although most steel plate is used in the hot-finished condition, some applications require one or more heat treating steps to mitigate imperfections and/or improve relevant qualities. The article discusses these interconnected factors as well as their impact on mechanical properties and critical fabrication issues, including formability, machinability, and weldability.

Low-carbon steel sheet and strip are used primarily in consumer goods. This article discusses quality descriptors and mechanical properties of low-carbon steel sheet and strip and carbon and low-alloy steel plate. Alloy steel sheet and strip are used primarily for those special applications that require the mechanical properties normally obtained by heat treatment. Steel sheet is coated in coil form before fabrication either by the steel mills or by specialists called coil coaters. Porcelain enamels are glass coatings applied primarily to products or parts made of sheet steel, cast iron, or aluminum to improve appearance and to protect the metal surface.

This article provides an overview of the different classification and designation systems of wrought carbon steel and alloy steel product forms with total alloying element contents not exceeding 5″. It lists the quality descriptors, chemical compositions, cast or heat composition ranges, and product analysis tolerances of carbon and alloy steels. The major designation systems discussed include the Society of Automotive Engineers (SAE)-American Iron and Steel Institute (AISI) designations, Unified Numbering System (UNS) designations, American Society for Testing and Materials (ASTM) designations, Aerospace Material Specification (AMS), and other international designations and specifications.

Hot-rolled steel bars and other hot rolled steel shapes are produced from ingots, blooms, or billets converted from ingots, or from strand cast blooms and billets, and comprise a variety of sizes and cross sections. This article provides a brief discussion on mechanical properties, quality descriptors and chemical compositions of hot-rolled steel bars, cold-finished steel bars, steel wire rod and steel wire. It contains tables that provide size tolerances for cold-finished carbon steel bar and cold-finished alloy steel bar.

Material extrusion systems are the most common types of additive manufacturing systems, also known as three-dimensional (3D) printers. This article focuses on the general 3D printing processes as can be demonstrated and manipulated in desktop printers. The discussion includes details of the components involved in material extrusion as well as the melt extrusion solidification (during cooling) process, the underlying mechanism of road bonding, and the factors affecting good part quality. The discussion also covers support material, postprocessing, and road-quality considerations and the addition of infill in melt extrusion to the hollow spaces inside an object to give it structural strength. Information is also provided on different materials and associated material properties that affect the rate the printer is able to advance and retract material, thereby affecting the quality and rate at which a part is printed. The final section provides information on the mechanism of viscous extrusion 3D printing.

This article presents the importance of progressing from post-manufacturing inspection/verification to in-process inspection/verification methods. It lists the various quality assurance factors considered for typical composite laminate lay-up process. The article provides information on composite cure tooling that is fabricated from steel, aluminum, or high-temperature composite materials. The quality assurance for commercial applications is reviewed. The article concludes with a discussion on data fusion systems designed to provide nondestructive analysis data from fabrication and assembly processes for each individual composite part.

Steel sheet is often coated in coil form prior to fabrication to save time, reduce production costs, and streamline operations. This article examines the most common precoating methods and provides a metallurgical understanding of how they impact the manufacturability, performance, and service life of the host material. The article covers metallic coatings, including zinc, aluminum, zinc-aluminum alloys, tin, and terne; pretreatment or phosphate coatings; and preprimed and painted finishes based on organic coatings.

When a heat of steel is melted and refined, it is necessary to solidify it into useful forms for further processing or final use. Ingot casting remains the preferred method for certain specialty, tool, forging, and remelted steels. This article discusses the methods, equipment, and theory for pouring, solidifying, and stripping steel ingots. It describes two basic types of pouring methods, top pouring and bottom pouring, and provides information on equipment such as hot tops, ingot molds, and stools. The design of the ingot is dictated by the application and type of steel involved. The article concludes with information on the applications of solidification simulation.

This article presents the structural attributes and internal characteristics of spot welds as well as the commonly inspected imperfections in resistance welds. It describes the industrial requirements for weld quality. Commonly performed destructive evaluations, namely, manual testing, quasi-static mechanical tests, dynamic mechanical tests, and metallographic examination, are reviewed. The article reviews weld-quality monitoring using various process signals and provides a discussion on the on-line and off-line nondestructive evaluation methods of spot weld quality.

Maintainability is a function of the durability, damage tolerance, and repairability of a structure. This article discusses the configurations of composite structures, such as sandwich, stiffened-skin, and monolithic structures, used in commercial aircraft composites. It describes the considerations for maintainability of the composite structures during the conceptual design phase. Sources of the defects and damage, such as manufacturing defects and in-service defects, are reviewed. The article describes the nondestructive inspection methods that are used in the repair of composite structures to locate damage, characterize the extent of damage, and ensure post-repair quality. It lists suggestions that can be used as design guidelines for adhesive bonding, general composite structure, sandwich structure, material selection, and lightning-strike protection. The article also provides the basic considerations for personnel, facilities, and equipment during maintenance.

This article provides a summary of the concepts discussed in the articles under the Section “Product Reliability, Maintainability, and Repair” in ASM Handbook, Volume 21: Composites. The Section covers a range of topics that include the general issues for reliability, maintenance, and repair of composite structures. Specific structural applications, including marine, infrastructure, and aircraft related issues, are discussed. Operators of equipment employing composite structures in primary load applications must understand the issues with respect to maintenance and repair action. The Section also provides information on these requirements.

This article addresses classifications and designations for carbon steels and low-alloy steels, particularly high-strength low-alloy (HSLA) steels, based on chemical composition, manufacturing methods, finishing method, product form, deoxidation practice, microstructure, required strength level, heat treatment and quality descriptors. It describes the effects of alloying elements on the properties and characteristics of steels. The article provides extensive tabular data pertaining to domestic and international designations of steels.

Selection of the process steps used, powder chosen, and lubricant choice have marked effects on the quality of a sintered component. This article describes the alloy composition, mechanical and structural properties, processing routes, and advantages of the common members of the copper alloy family, namely, pure copper, brass, and bronze, which all aid in the selection of the suitable material for structural and bearing applications. It outlines the structural applications of nickel silver alloys.

The structural efficiency of a composite structure is established by its joints and assembly. Adhesive bonding, mechanical fastening, and fusion bonding are three types of joining methods for polymer-matrix composites. This article provides information on surface treatment and the applications of adhesive bonding. It discusses the types of adhesives, namely, epoxy adhesives, epoxy-phenolic adhesives, condensation-reaction PI adhesives, addition-reaction PI adhesives, bismaleimide adhesives, and structural adhesives. The article provides information on fastener selection considerations, including corrosion compatibility, fastener materials and strength, head configurations, importance of clamp-up, interference fit fasteners, lightning strike protection, blind fastening, and sensitivity to hole quality. Types of fusion bonding are presented, namely, thermal welding, friction welding, electromagnetic welding, and polymer-coated material welding.