1-20 of 390 Search Results for

sticking

Sort by
Image
Published: 01 January 1989
Fig. 39 Effect of dressing stick grit size and dressing stick consumption on wheel roughness (as measured by work surface finish) during constant-force dressing. Work material ground was M2 high-speed tool steel using a CBN wheel (CB 220 WBA) measuring 255 × 13 × 3.2 × 32 mm (10 × 1 2 More
Image
Published: 30 September 2015
Fig. 6 After heating, melt sticks or thermocouples measure the pipe temperature. After fusion-bonded epoxy application, infrared measurements are effective. Courtesy of J.A. Kehr More
Image
Published: 30 September 2015
Fig. 10 For patch stick repairs, two steps are critical to obtain good adhesion. First, the surface of the parent coating must be roughened; 80- or 120-mesh sandpaper works well. The sanding residue must be wiped away with a clean cloth. Second, the parent coating surface must be preheated More
Image
Published: 31 October 2011
Fig. 2 The coating on a coated (stick) electrode provides a gaseous shield around the arc and a slag covering on the hot weld deposit. More
Image
Published: 31 August 2017
Fig. 29 Stick anode heads. Courtesy of Anotec Industries Ltd. More
Image
Published: 01 January 1989
Fig. 37 Schematic illustrating abrasive stick dressing. Low coolant flow is required during the stick dressing process. More
Image
Published: 01 January 1989
Fig. 40 Effect of dressing stick parameters on CBN wheels for constant infeed rate dressing More
Image
Published: 31 December 2017
Fig. 9 Friction force recording for a system displaying stick-slip behavior More
Series: ASM Handbook
Volume: 7
Publisher: ASM International
Published: 30 September 2015
DOI: 10.31399/asm.hb.v07.a0006079
EISBN: 978-1-62708-175-7
... Abstract Metals and alloy powders are used in welding, hardfacing, brazing, and soldering applications, which include hardface coatings, the manufacturing of welding stick electrodes and flux-cored wires, and additives in brazing pastes or creams. This article reviews these applications...
Book Chapter

By K. Subramanian
Book: Machining
Series: ASM Handbook
Volume: 16
Publisher: ASM International
Published: 01 January 1989
DOI: 10.31399/asm.hb.v16.a0002152
EISBN: 978-1-62708-188-7
... in production grinding operations, namely, stationary tool, powered, and form truings. It reviews the truing methods, such as truing with abrasive wheels and hard ceramics, for batch production. The article explains practical methods available for dressing CBN wheels, namely, abrasive stick, abrasive-jet...
Series: ASM Handbook
Volume: 6
Publisher: ASM International
Published: 01 January 1993
DOI: 10.31399/asm.hb.v06.a0001353
EISBN: 978-1-62708-173-3
... Abstract Shielded metal arc welding (SMAW), commonly called stick or covered electrode welding, is a manual welding process whereby an arc is generated between a flux-covered consumable electrode and a workpiece. This article discusses the advantages and limitations and applications of the SMAW...
Series: ASM Handbook
Volume: 18
Publisher: ASM International
Published: 31 December 2017
DOI: 10.31399/asm.hb.v18.a0006361
EISBN: 978-1-62708-192-4
... that should be addressed to ensure that valid data are derived from a friction test. The article presents definitions of terms commonly used in tribology such as static friction, kinetic coefficient of friction, stick-slip behavior, and lubricated friction. It provides information on the precautions that must...
Image
Published: 15 December 2019
Fig. 8 Examples of structure visualization in different representations: (a) disordering of nitro moiety; (b) combination of capped-stick and ball-and-sticks representations; (c) octahedral-tetrahedral heptamer shown in ball-and-stick representation; (d) octahedral–-tetrahedral heptamer shown More
Image
Published: 01 January 2006
Fig. 33 Schematic of unconditioned and conditioned burrs. (a) Unconditioned edge with burr sticking down. (b) Conditioned edge with burr rolled 90° to stick out. (c) Conditioned edge with burr rolled 90° and then pressed along the edge More
Image
Published: 12 September 2022
Fig. 2 Overview of the collagen triple helix. (a) First high-resolution crystal structure of a collagen triple helix, formed from (ProHypGly)4–(ProHypAla)–(ProHypGly)5. (b) View down the axis of a (ProProGly)10 triple helix, with the three strands depicted in space-filling, ball-and-stick More
Image
Published: 01 January 1990
of insulation resulting from oxide formation after 3 million operations. Palladium-copper-silver with tungsten failed as a result of sticking. Silver-nickel with silver-palladium failed from metal transfer. 15 V dc, 1.0 A: Life comparison for four contact material combinations intended for use in automotive More
Image
Published: 31 August 2017
Fig. 1 Typical subsurface shrinkage defect with dendrite arms partly covered with graphite sticking out More
Image
Published: 31 October 2011
Fig. 8 Typical tip patterns for ultrasonic welding with good strength and minimum tip sticking when spot welding automotive aluminum More
Image
Published: 01 January 1989
Fig. 38 Variation of relative dressing force with time at a constant infeed rate of the dressing stick. (a) Normal force. (b) Tangential force More
Image
Published: 31 October 2011
Fig. 1 This is typical of constant current welders primarily designed for manual stick electrode welding (shielded metal arc welding). OCV, open-circuit voltage More