Search Results for sliding adhesive wear

This article provides a broad overview of sliding and adhesive wear, its processes, and its control, with special attention to three general classes of materials: metals, ceramics, and polymers. It discusses the ways in which materials can be damaged and removed during sliding contact. The article explains the physical and chemical nature of sliding surfaces. It presents wear equations, design criteria, and criteria for selection of materials. The article also describes the factors that affect wear performance of hybrid sliding systems. It concludes by providing general guidelines to prevent the sliding and adhesive wear in metals, polymers, and ceramics.

This article reviews friction and wear of various dental materials that have been studied by fundamental wear measurements, simulated service wear measurements, and clinical measurements. The materials include dental amalgam, composite restorative materials, pit and fissure sealants, dental cements, porcelain and plastic denture teeth, dental feldspathic porcelain and ceramics, endodontic instruments, periodontal instruments, and orthodontic wires. The article describes the correlations of properties such as the hardness, fracture toughness, and wear. It provides information on wear mechanism such as the sliding adhesive wear, two-body abrasion, three-body abrasion, erosion, and fatigue.

Friction and wear are important when considering the operation and efficiency of components and mechanical systems. Among the different types and mechanisms of wear, adhesive wear is very serious. Adhesion results in a high coefficient of friction as well as in serious damage to the contacting surfaces. In extreme cases, it may lead to complete prevention of sliding; as such, adhesive wear represents one of the fundamental causes of failure for most metal sliding contacts, accounting for approximately 70% of typical component failures. This article discusses the mechanism and failure modes of adhesive wear including scoring, scuffing, seizure, and galling, and describes the processes involved in classic laboratory-type and standardized tests for the evaluation of adhesive wear. It includes information on standardized galling tests, twist compression, slider-on-flat-surface, load-scanning, and scratch tests. After a discussion on gear scuffing, information on the material-dependent adhesive wear and factors preventing adhesive wear is provided.

This article considers the main characteristics of wear mechanisms and how they can be identified. Some identification examples are reported, with the warning that this task can be difficult because of the presence of disturbing factors such as contaminants or possible additional damage of the worn products after the tribological process. Then, the article describes some examples of wear processes, considering possible transitions and/or interactions of the mechanism of fretting wear, rolling-sliding wear, abrasive wear, and solid-particle erosion wear. The role of tribological parameters on the material response is presented using the wear map concept, which is very useful and informative in several respects. The article concludes with guidelines for the selection of suitable surface treatments to avoid wear failures.

This article discusses the adhesion behavior of materials in low-pressure and vacuum environments and provides a schematic illustration of an apparatus for measuring adhesion and friction in ultrahigh vacuum. It describes the effects of low-oxygen pressures and vacuum environments on adhesion and friction, as well as the effects of defined exposure to oxygen on friction. The article discusses the wear of various metals in contact with ceramics, and alloying element effects on friction, wear, and transfer of materials. It also describes studies that characterize the contributions of surface contamination and chemical changes to tribology in low-pressure and vacuum environments.

This article discusses the tests designed specifically to evaluate the adhesion, friction, and wear behavior of various material systems. It tabulates the characteristics of common types of wear and mechanical surface damage. The article also considers the displaying and analyzing of adhesion, friction, and wear test data. It concludes with a description of devices used for testing adhesion, friction, and wear.

This article reviews the abrasive and adhesive wear failure of several types of reinforced polymers, including particulate-reinforced polymers, short-fiber reinforced polymers (SFRP), continuous unidirectional fiber reinforced polymers (FRP), particulate-filled composites, mixed composites (SFRP and particulate-filled), unidirectional FRP composites, and fabric reinforced composites. Friction and wear performance of the composites, correlation of performance with various materials properties, and studies on wear-of failure mechanisms by scanning electron microscopy are discussed for each of these types.

Reinforced polymers (RPs) are widely used in structural, industrial, automotive, and engineering applications due to their ecofriendly nature and the potential to manipulate their properties. This article addresses the technical synthesis of RPs, referring to their tribological behavior, to provide insights into the contribution and interaction of influential parameters on the wear behavior of polymers. It provides a brief discussion on the effects of significant parameters on RP tribology. The article describes abrasive and adhesive wear and provides a theoretical synthesis of the literature regarding the wear mechanisms of RPs. It also describes the synthesis of abrasive wear failure of different types of RPs and highlights the contribution of these influential parameters. The article addresses the synthesis of adhesive wear failure of different types of RPs.

Surface damage from sliding contact is related to the adhesion of mating surfaces in contact. This article describes the methods for evaluation of surface damage caused by sliding contact. It defines adhesive wear in terms of asperity, cold welding, galling, scuffing, seizure, and wear coefficient. The article discusses various galling testing methods, such as button-on-block galling test, pin-on-flat galling test, and threaded connection galling test. It provides an overview of fretting wear that occurs between two tight-fitting surfaces subjected to a cyclic, relative motion of extremely small amplitude. The article also reviews the fretting rig for investigating fretting wear.

Friction materials are the components of a mechanism that converts mechanical energy into heat upon sliding contact. This article discusses the selection criteria, manufacturing process, and applications of friction powder metallurgy materials. It provides information on the manufacturing process of powder metallurgy friction materials through a process of mixing/blending, compacting, and sintering. The final machining that they undergo, to ensure that they meet dimensional specifications, is also discussed.

Wear is the damage to a solid surface as a result of relative motion between it and another surface or substance. This article discusses the four general ways by which a material can wear, namely, adhesive wear, abrasive wear, fatigue or fatigue-like wear, and corrosive wear. It tabulates the operational classification of wear situations and describes the relationship between wear or wear rate and design parameters. The article reviews the effect of lubrication on wear behavior and the types of lubricants. It illustrates some fundamental criteria that can be applied in the selection of a material for wear applications. The article explains four elements of wear design, such as system analysis, modeling, data gathering, and verification. It concludes with a discussion on the design approach for low-wear computer peripherals.

Plastics or polymers are used in a variety of engineering and nonengineering applications where they are subjected to surface damage and wear. This article discusses the classification of polymer wear mechanisms based on the methodologies of defining the types of wear. The first classification is based on the two-term model that divides wear mechanisms into interfacial and bulk or cohesive. The second is based on the perceived wear mechanism. The third classification is specific to polymers and draws the distinction based on mechanical properties of polymers. In this classification, wear study is separated as elastomers, thermosets, glassy thermoplastics, and semicrystalline thermoplastics. The article describes the effects of environment and lubricant on the wear failures of polymers. It presents a case study on nylon as a tribological material. The article explains the wear failure of an antifriction bearing, a nylon driving gear, and a polyoxymethylene gear wheel.

This article presents the mechanisms of polymer wear and quantifies wear in terms of wear rate (rate of removal of the material). Interfacial and bulk wear are discussed as well as a discussion on the wear study of "elastomers," "thermosets," "glassy thermoplastics," and "semicrystalline thermoplastics." The article also discusses the effects of environment and lubricant on the wear failures of polymers. It presents a case study on considering nylon as a tribological material and failure examples, explaining wear resistance of polyurethane elastomeric coatings and failure of an acetal gear wheel.

This article focuses on environmental and application factors in solid friction. It covers the tribology of contact between a soft and hard material, including mechanisms and testing. The article describes the tribology of contact between a metal and tool during metalworking processes. It also discusses the tribology of metal friction at elevated temperatures.

This article describes two variations of carbon-base coatings: diamondlike carbon (DLC) coatings and polycrystalline diamond (PCD) coatings. It discusses the basics of a few deposition methods as they apply to industrially relevant coatings. The methods include deposition of tungsten-containing hydrogenated amorphous carbon films, deposition of tetrahedral amorphous carbon films, and deposition of silicon-incorporated hydrogenated amorphous carbon films. The most common deposition technologies for diamond films are also discussed. The article provides information on surface preparation for DLC and diamond deposition. It also provides a discussion on the coating composition and structure, mechanical and tribological properties, and applications of DLC and diamond coatings. The quality control techniques for DLC and diamond coatings are specified to meet customer requirements and ensure repeatable quality.

Polymers and polymer composites have become attractive for tribological applications due to their specific material properties. This article begins by discussing the fundamentals of polymer friction and wear. It summarizes the main polymer materials used in tribological applications. The article explains the effects of load, sliding velocity, and temperature on the friction coefficient. It describes three types of wear modes, namely, abrasive, adhesion, and fatigue. The article discusses the frictional behavior of polymer composites and polymer coatings. It concludes by providing information on tribotesting of polymers and polymer composites.