Fig. 4 Creep strength (0.01% 1000 h) and rupture strength (100,000 h) of 1Cr-0.5Mo and 1.25Cr-0.5Mo steel. Source: Ref 1 More

Fig. 3 Rupture strength in 100 h for selected polycrystalline cast nickel-base superalloys versus temperature More

Fig. 8 Effect of aluminum + titanium content on the stress-rupture strength of wrought and cast nickel-base superalloys More

Fig. 11 100 h stress rupture strength as a function of near-net-shape die temperature for selected nickel-base alloys More

Fig. 25 Comparison of the transverse rupture strength of uncoated and coated carbide tools. Measured by a three-point bend test on 5 × 5 × 19 mm (0.2 × 0.2 × 0.75 in.) specimens of 73WC-19(Ti,Ta,Nb)C-8Co More

Fig. 4 Effect of cobalt content and grain size on the transverse rupture strength of WC-Co cemented carbides More

Fig. 8 Effect of temperature on the 1000-h specific rupture strength of MA 760, MA 6000, DS MAR-M 200, and TD nickel More

Fig. 25 Comparison of the transverse rupture strength of uncoated and coated carbide tools. Measured by a three-point bend test on 5 × 5 × 19 mm (0.2 × 0.2 × 0.75 in.) specimens of 73WC-19(Ti,Ta,Nb) C-8Co More

Fig. 27 Effect of binder metal composition on the transverse rupture strength of a titanium carbonitride cermet. Source: Ref 64 More

Fig. 82 Rupture strength of molybdenum More

Fig. 122 Temperature dependence of the 1-h rupture strength of tungsten. Sources: Ref 502 , 520 , 521 , 522 , 523 , 524 , 525 More

Fig. 5 Variation of 10 5 -h creep-rupture strength as a function of temperature for 2 1 4 Cr-1Mo steel, standard 9Cr-1Mo, modified 9Cr-1Mo, and 304 stainless steel. Source: Ref 7 More

Fig. 39 Variation in stress-rupture strength of 2 1 4 Cr-1Mo steel under different heat treatments. QT, quenched and tempered; NT, normalized and tempered; A, annealed; UTS, ultimate tensile strength. Source: Ref 63 More

Fig. 40 Influence of heat treatment on 10 5 −h creep-rupture strength of 2 1 4 Cr-1Mo steel. Source: Ref 66 More

Fig. 44 Effect of spheroidization on the rupture strength of carbon-molybdenum steel (0.17C-0.88Mn-0.20Si-0.42Mo). Source: Ref 73 More

Fig. 11 Effect of infiltration on transverse rupture strength of iron-carbon alloys sintered to a density of 6.4 Mg/m 3 . Combined carbon in the alloys was about 80% of the amount of graphite added to the iron powder. The amount of copper infiltrant was adjusted to fill various fractions More

Fig. 16 100,000-h creep-rupture strength of various steels used in boiler tubes. TB12 steel has as much as five times the 100,000-h creep-rupture strength of conventional ferritic steels at 600 °C (1110 °F). This allows an increase in boiler tube operating temperature of 120 to 130 °C (215 More