Nickel-base alloy castings are widely used in corrosive-media and high-temperature applications. This article begins with a discussion on the compositions of corrosion-resistant nickel-base casting alloys and heat-resistant nickel-base casting alloys. It describes the effects of aluminum and titanium on the structure and properties of nickel-base alloys. The article provides information on the melting, foundry, and pouring practices for nickel-base alloys. It explains the welding and heat treatment of the nickel-base casting alloys. The article concludes with an overview of the numerous applications of cast heat-resistant nickel-base alloys.

This article focuses on the internal corrosion of iron and copper in potable water. It tabulates the corrosion and water-quality problems caused by materials in contact with drinking water. The article provides a theoretical description of the reduction-oxidation reactions in water to analyze the causes of corrosion of metals in contact with water. It discusses the Langelier saturation index and the Larson index for determining corrosion in potable water systems. The article describes the two major ways of mitigation against corrosion in potable water systems. The first is to line the pipe surface physically such that water and dissolved oxygen cannot reach the metal surface and the second is to add chemical inhibitors to alter water chemistry.

This article provides a summary of the concepts discussed in the Section “Corrosion in Specific Industries” in the ASM Handbook, Volume 13C:Corrosion: Environments and Industries. This Section applies the fundamental understanding of corrosion and knowledge of materials of construction to practical applications. The industries addressed are nuclear power, fossil and alternative fuel, land transportation, air transportation, microelectronics, chemical processing, pulp and paper, food and beverage, pharmaceutical and medical technology, petroleum and petrochemical, building, and mining and metal processing.

This article provides a detailed discussion on the corrosion of steel and stainless steel under insulation. Stress corrosion cracking mechanism, types of alloys susceptible to corrosion, factors influencing corrosion, and corrosion prevention methods, are also discussed.

This article describes the classification of organic solvents, namely, aprotic and protic solvents and one-component and multi-component systems. It discusses the corrosion behavior in aprotic and protic solvents. The article contains a table that presents the relationship among solution conductivity, acidity, and the corrosion rates of type 304 stainless steel in protic and aprotic solvents. The article reviews important environmental variables that influence corrosion testing in organic liquids.

Nitric acid is a strongly oxidizing acid that is aggressively corrosive to many metals. Its oxidizing nature is affected by acid temperature and concentration, and composition of the alloy exposed to it. This article focuses on the corrosion behavior of various ferrous and nonferrous metals and alloys when exposed to a nitric acid environment. The ferrous and nonferrous metals and alloys discussed are carbon and alloy steels, stainless steels, aluminum alloys, titanium, zirconium alloys, niobium and tantalum, and nonmetallic materials.

This article focuses on the specimen preparation procedures of austenitic manganese steels: sectioning, mounting, and grinding. It provides information on macroexamination and microexamination of a fracture surface, the microstructure and special features of austenitic manganese steels, and the alloying elements used.

This article discusses the forging processes and equipment and forging practice associated with the forging of magnesium alloys. It describes the workability of magnesium alloys. The article concludes with a discussion on the inspection of magnesium alloy forgings.

This article begins with an overview of the various types of damage that take place in advanced composite components. These include holes and punctures, delaminations, disbonds, core and resin damage, and water intrusion. The article describes various damage detection techniques, such as visual inspection, tap testing, and ultrasonic inspection, in field conditions. Designing for repair involves various considerations including structure types and repair types. The types of repairs together with other issues surrounding advanced composite repair technology are discussed. The article also provides a discussion on the design considerations, instructions, and materials for repair. It explains various paint-removal methods for composites. The article concludes with a discussion on curing equipment such as portable repair systems, vacuum bags, and ovens and autoclaves.

Composite tooling is the making of tools from composite materials. This article focuses on wet lay-up methods and techniques that are used to fabricate prepreg tooling. It discusses the advantages and disadvantages of composite tools. The article describes the process considerations for composite tool design, such as master model or pattern design selection, fiber and fabric selection, resins, and surface coat and ply. Various tool laminate construction techniques, such as curing and demolding, and cutting and trimming, are reviewed. The article also describes the substructure design for the construction of tool laminates.

Precious metals are of inestimable value to modern civilization. This article discusses the resources and consumption, trade practices, and special properties of precious metals and its alloys, including ruthenium, rhodium, palladium, silver, osmium, iridium, platinum, and gold, and tabulates the industrial applications of precious metals. It provides information on the commercial forms (wire, rod, sheet, strip, ribbon, and foil) and uses of precious metals, including semifinished products, precious metal powders, industrial uses, coatings, and jewelry.

Gallium-base components can be found in a variety of products ranging from compact disk players to advanced military electronic warfare systems, owing to the factor that it can emit light, has a greater resistance to radiation and operates at faster speeds and higher temperatures. This article discusses the uses of gallium in optoelectronic devices and integrated circuits and applications of gallium. The article discusses the properties and grades of gallium arsenide and also provides information on resources of gallium. The article talks about the recovery techniques, including recovery from bauxite, zinc ore and secondary recovery process and purification. The article briefly describes the fabrication process of gallium arsenide crystals. Furthermore, the article gives a short note on world supply and demand of gallium and concludes with research and development on gallium arsenide integrated circuits.

This article reviews some of the trends in superalloy development as they relate to U.S. strategic materials availability and the aerospace industry. It discusses the supply sources and availability of strategic materials and summarizes the status of U.S. resources and reserves. The article presents a list of several superalloys that have been used in gas turbine engines or that are emerging as replacements because of the promise of increased operating temperatures and higher efficiencies for the aircraft of the future. It concentrates on the objectives, results, and methodology of the NASA Conservation of Strategic Aerospace Materials (COSAM) program.

Ceramic and glass manufacturers take environmental regulations into consideration during all stages of the product cycle, from research and development to purchasing, processing, end use, and disposal. Ceramic and glass products are finding application in the construction industry and as raw materials for other processes. This article describes the recycling of in-process scrap and industrial wastes (fly ash, red mud, metallurgical waste, and other waste products), and applications of these recycled products. It focuses on environmental regulations such as Resource Conservation and Recovery Act and Clean Air Act. The Clean Air Act requires all states to meet minimum emissions standards for nitrogen-oxygen compounds, volatile organic compounds, and carbon monoxide.

This article describes selected U.S. environmental statutes and regulations that are pertinent to material surface finishers. It provides information on the applicability, requirements, and permitting conditions of the Clean Air Act, the Resources Conservation and Recovery Act, the Superfund Amendments and Reauthorization Act, and the Clean Water Act.

Grinding is an extremely complex process that requires the consideration of a number of elements in order to make a reasonably adroit initial selection of a fluid or fluids for a manufacturing plant. In addition, the disposal of grinding wastes must meet the minimum requirements as recommended by the federal Environmental Protection Agency (EPA) and Resource Conservation and Recovery Act (RCRA) regulations. This article explains the selection considerations of such fluids, as well as the applications and environmental issues related to the grinding processes.

This article primarily considers the problem of sampling bulk materials, including minerals, metals, environmentally important substances, and industrial raw materials and waste products. It provides useful information on sample types, sampling plan, optimizing sampling resources, practical aspects of sampling, and how to ensure the quality of sampling.

A corrosionist refers to a corrosion engineer, a corrosion technician, a corrosion scientist, a chemist, a physicist, an electrical engineer, a mechanical engineer, a coatings or plastics salesperson, a corrosion consultant, or a plant operator. This article presents an overview of statistical inference and addresses the commonly used statistical tools and tests. It describes the science and engineering of materials, including metals, polymers, and ceramics. The article explores the principles of various surface-sensitive techniques and the usefulness and limitations of these techniques. The techniques are divided into those that provide insight into surface topography and surface structure, and those that provide understanding of chemical nature and identity. The article presents a list of web sites and print media addressing corrosion and related topics in five different areas: societies and associations; corrosion standards, specifications, and recommended practices; sources of corrosion information; corrosion databases and data compilations; and other web resources.

Remarkable changes in information technology have occurred, and information and data are now routinely available by way of the World Wide Web. This article lists selected information sources and databases and demonstrates the way they are accessed. It presents information for a corrosionist in five areas: societies and associations addressing corrosion and related topics; corrosion standards, specifications, recommended practices, and related topics; sources of corrosion information; corrosion databases and data compilations; and other web resources.

Risk and hazard analysis can be effectively used during design reviews to provide valuable feedback to the design to avoid failures. This article discusses the types of risks, namely, real risk, statistical risk, predicted risk, and perceived risk. It describes the principle and technical methods of risk/hazard analysis practiced in the industry to identify possible hazards and the resources necessary to avoid or reduce risks. These methods include the failure mode and effect analysis, fault tree analysis, event tree analysis, risk/benefit analysis, safety analysis, and probabilistic estimates.