Search Results for resin transfer molding interface

Continuous fiber composite materials offer dramatic opportunities for producing lightweight laminates with tremendous performance capabilities. This article describes the kinematics of fabric deformation and explains the algorithms used in draping simulation. It discusses the basic components, such as laminate and ply, of continuous fiber composite. The article provides information on the core sample and ply analysis. It details producibility, flat-pattern evaluations, and laminate surface offset. The article discusses various interfaces, such as the structural analysis interface, the resin transfer molding interface, the fiber placement and tape-laying interface, and the laser projection interface.

This article provides information on the classification of various composites manufacturing processes based on similar transport processes. The composites manufacturing processes can be grouped into three categories: short-fiber suspension methods, squeeze flow methods, and porous media methods. The article presents an overview of the modeling philosophy and approach that is useful in describing composite manufacturing processes.

This article presents the basic guidelines considered in designing a composite structure, and the basic definitions of terms that apply to composites. It describes the analysis of a composite laminate based on stress-strain relationships, stress-strain load relationships, general load displacement case, and general load case solution. Factors affecting the composite materials properties and allowables of fiber-reinforced polymers are reviewed. The article discusses the process considerations for mold design, such as master model, metal tooling, composite tooling, and tool care. It explains the resin selection in designing the composite for use in a particular application. The article illustrates the various methods that are used to process a composite component, namely, wet lay-up, autoclave, resin transfer molding, and vacuum-assisted resin transfer molding. It provides a discussion on electromagnetic interference shielding, electrostatic discharge protection, metal plating, fire resistance, and corrosion resistance on composite materials.

The compression molding process is most commonly called the sheet molding compound (SMC) process in reference to the precursor sheet molding compound material it uses. This article discusses the types of materials used for sheet manufacture, and describes the manufacturing and processing parameters of SMC components, providing details on tooling and process advantages and limitations. The article provides a general overview of the types of compression molding processes, including structural compression molding and thermoplastic compression molding.

Shell molding is used for making production quantities of castings that range in weight from a few ounces to approximately 180 kg (400 lb), in both ferrous and nonferrous metals. This article lists the limitations or disadvantages of shell mold casting. It describes the two methods for preparation of resin-sand mixture for shell molding, namely, mixing resin and sand according to conventional dry mixing techniques, and coating the sand with resin. Shaping of shell molds and cores from resin sand mixtures is accomplished in machines. The article discusses the major steps in producing a mold or core and describes the problems most frequently encountered in shell-mold casting. The problems include mold cracking, soft molds, low hot tensile strength of molds, peelback, and mold shift. The article concludes with information on examples that provide some relative cost comparisons between shell molding and green sand molding.

This article presents a comprehensive collection of the definition of terms related to metallurgy.

Modeling of gas evolution during sand mold castings is one of the most important technical and environmental issues facing the metal casting industry. This article focuses on describing the capability of numerically predicting gas evolution for the furan binder/silica sand system. It illustrates numerical modeling to study the gas evolution from furan binder/silica sand mold aggregate for aluminum, cast iron, and steel alloy cast components. The article discusses simulation results and experimental validation for aluminum alloys, cast iron castings, and steel alloys, as well as a parametric study that investigated the effects of various variables. It concludes with information on the application of 3-D modeling methodology to investigate gas emissions in furan binder/silica sand castings for steel 4140 and aluminum A356 alloys.

Molding compounds are plastic materials in varying stages of pellets or granulation that consist of resin, filler, pigments, reinforcement, plasticizers, and other ingredients ready for use in a molding operation. This article describes the material components and physical properties of sheet molding compounds (SMC). The three types of resin paste mixing techniques, such as batch, batch/continuous, and continuous, for an SMC operation are reviewed. The article discusses the design features and functional operations of the two types of SMC machines, namely, continuous-belt and beltless machines. It explains the formulation and processing of bulk molding compounds and reviews molding methods for bulk molding compounds, including compression, transfer, and injection molding. The effects of the fiber type and length and the matrix type on thermoset bulk molding compounds are discussed. It describes the four injection molding processes of injection molding compounds such as feeding, transporting, injecting, and flowing.

Sheet molding compounds (SMCs) refers to both material and process for producing glass-fiber-reinforced polyester resin items. This article discusses the material components incorporated into the resin paste for desirable processing and molding characteristics and optimum physical and mechanical properties, including catalyst, fillers, thickeners, pigments, thermoplastic polymers, flame retardants, and ultraviolet absorbers. It talks about the mixing techniques available for SMC resin pastes, including batch, batch/continuous, and continuous mixing. The article also outlines the design features and the operations of continuous-belt and beltless machine type SMCs.

This article describes common design criteria and identifies the design considerations that have a significant effect on the end product. The design criteria include cost, size, mechanical properties, repeatability and precision of parts, damage tolerance and durability, and environmental constraints.

This article discusses the attempts made by the industry to create sensing approaches for modeling a process, part, and chemistry and kinetics. It reviews microwave curing of thick-section composites and the resin cure sensors that are used for resin cure monitoring. These include dielectric cure sensors, fiberoptics-based resin cure sensors, ultrasonics-based resin cure sensors, and dosimetry-based resin cure sensors. The article provides information on the resin cure control flow sensing, flow modeling, flow mapping, and resin flow. It addresses some practical issues in sensing resin cure and flow.

Composite tooling is the making of tools from composite materials. This article focuses on wet lay-up methods and techniques that are used to fabricate prepreg tooling. It discusses the advantages and disadvantages of composite tools. The article describes the process considerations for composite tool design, such as master model or pattern design selection, fiber and fabric selection, resins, and surface coat and ply. Various tool laminate construction techniques, such as curing and demolding, and cutting and trimming, are reviewed. The article also describes the substructure design for the construction of tool laminates.

Mounting of the specimen is often desirable or necessary for handling and metallographic polishing after the specimen is cut into an appropriate size. This article illustrates the different mechanical clamps used in mounting small specimens. It provides useful information on compression molded mounts, which are molded with thermoplastic and thermosetting resins. The article reviews several resins and their key factors, which help in the selection of the most appropriate mounting method and resin. It also discusses the characteristics of plastic mounting materials. The article provides information on the molds and resins used for castable mounts, vacuum treatment of mounts, special mount arrangements, and mount marking and storage.

This article discusses technologies focused on processing plastic materials or producing direct tools used in plastics processing. The article focuses on extrusion and injection molding, covering applications, materials and their properties, equipment, processing details, part design guidelines, and special processes. It also covers the functions of the extruder, webline handling, mixing and compounding operations, and process troubleshooting. Thermoforming and mold design are covered. Various other technologies for polymer processing covered in this article are blow molding, rotational molding, compression molding, transfer molding, hand lay-up process, casting, and additive manufacturing.

This article discusses classification of foundry processes based on the molding medium, such as sand molds, ceramic molds, and metallic molds. Sand molds can be briefly classified into two types: bonded sand molds, and unbonded sand molds. Bonded sand molds include green sand molds, dry sand molds, resin-bonded sand molds, and sodium silicate bonded sand. The article describes the casting processes that use these molds, including the no-bake process, cold box process, hot box process, the CO2 process, lost foam casting process and vacuum molding process. The casting processes that use ceramic molds include investment casting, and plaster casting. Metallic molds are used in permanent mold casting, die casting, semisolid casting, and centrifugal casting.

Elastomeric tooling uses rubber details to generate required molding pressure or to serve as a pressure intensifier during composite part curing cycles. This article discusses the various aspects of the forms of commercially available bag-side elastomeric caul systems. It describes the two basic methods, such as the trapped or fixed-volume rubber method and the variable-volume rubber method, of elastomeric tooling, which use the principles of thermal expansion molding. The significant properties and controlling equations that are required to characterize elastomeric tooling material are also discussed.

The design and analysis of aerospace and industrial composite components and assemblies requires a detailed knowledge of materials properties, which, in turn, depend on the manufacturing, machining, and assembly methods used. This article, through several tables and graphs, provides the mechanical properties, physical properties, and service characteristics of representative composite fiber-resin combinations, including thermoplastic matrix composites such as thermoplastic polyester resins, thermoplastic polyamide resins, and thermoplastic polysulfone resins, and thermoset matrix composites such as thermoset polyester resins, thermoset phenolic resins, thermoset epoxy resins, thermoset polyimide resins, and thermoset bismaleimide resins.

This article is a compilation of definitions for terms related to engineering materials, including plastics, elastomers, polymer-matrix composites, adhesives and sealants, ceramics, ceramic-matrix composites, glasses, and carbon-carbon composites.