The role of a mixer/agitator in quenching applications is to control the mixing environment in order to meet the process criteria. This article provides the basic fundamentals of the sizing of agitators, tank geometry importance, and other considerations for the application of agitators in quench tanks. It also discusses the differing methods for the sizing and selection of agitators for quench tank applications.

Quenchant agitation can be obtained by circulating quenchant in a quench tank through pumps and impellers. The selection of the agitation method depends on the tank design, type and volume of the quenchant, part design, and the severity of quench required. This article describes flow measurement methods, temperature control, materials handling, and filtration processes during the agitation process. The maintenance of quenching installations is also discussed.

Computational fluid dynamics (CFD) provides an efficient, alternate, virtual approach for simulating and analyzing quenching processes with an impact on component design, manufacturing process, and quality. This article provides domain insights for quenching researchers and CFD practitioners for the modeling of the industrial quenching process and for supporting the diverse multifunctional needs in an industry, ranging from primary metallurgical companies (steel, aluminum, and other alloys), original equipment manufacturers, engineering companies, captive and commercial heat treating facilities, quench system manufacturers, and quench fluid suppliers. It describes the governing differential equations for the fluid flow and heat-transfer phenomena during quenching. The article also discusses different modeling categories to determine a CFD methodology for quenching.

Agitation is one of the most critical areas of quench system design. This article provides an overview of the impact of agitation on quench uniformity, followed by a general discussion of the selection and use of various types of agitators, including recirculation pumps, jet mixers, forced air (sparging), and impellers. A brief overview of heat-exchanger types and their selection criteria is also provided, along with simplified calculations for approximating heat-exchange requirements. The methods of selecting a quenchant are provided. Recommendations for system maintenance are also described. Much effort is placed on the proper design of the furnace for temperature and atmosphere uniformity, proper temperature control, and exact carbon potential. However, the design of the quench tank can have a drastic effect on the overall system performance, with proper design ensuring proper mechanical properties (hardness, strength, and fracture toughness) as well as distortion control.

Quenching severity is agitation-dependent and therefore, magnitude and turbulence of fluid flow around a part in the quench zone are critically important relative to the uniformity of heat transfer throughout the quenching process. This article provides an overview of the measurement principles for different types of flow devices used in production quench tanks, namely, vane sensors, fluid-quench sensors, caterpillar quench-evaluation sensors, and thermal probes. Various methods of flow measurement in commercial quench tanks may be acceptable for adequate control to ensure a high-quality production process.

This article presents the fundamentals of induction hardening (IH). It focuses on liquid quenching technology, but some specifics and brief comments are provided regarding alternative quenching media as well. The article provides a discussion on the following quench modes that can be applied in IH using liquid media: conventional immersion quenching, open spray quenching, flood quenching, and submerged quench or submerged spray quench. It also focuses on four primary methods of IH: scan hardening, progressive hardening, single-shot hardening, and static hardening.

Intensive quenching (IQ) is an alternative method of hardening steel parts, providing extremely high cooling rates within the martensite-phase formation temperature range. This article begins with the description on the general correlation between steel mechanical properties and cooling rate during IQ. It presents a review of batch intensive quenching (IQ-2) methods and single-part intensive quenching (IQ-3) methods as well as practical applications of these methods. The article provides useful information on the effect of heat flow on cooling in these methods, and discusses the improvements achieved in part microstructure, mechanical properties, and stress conditions of steel, after intensive quenching. It also describes the reasons for part distortion in IQ, and reviews the types of quench systems used in IQ-2 and IQ-3 processes.

Intensive quenching (IQ) is an alternative method of hardening steel parts. Two types of IQ methods are used in heat treating practice: IQ-2 and IQ-3. IQ-2 is implemented in IQ water tanks, which are usually used for batch quenching of steel parts. IQ-3 is conducted in single-part processing using high-velocity water flow IQ units. This article presents a detailed description of IQ technology, related equipment, and IQ applications. A review of intensive quench system design and processing is provided, including numerical design criteria, steel selection, quenchants, properties (especially optimal residual stress profiles). Several specific applications of intensive quenching are also provided.

This article provides information on the various stages of quenching, sources of distortion, and factors that affect the creation of thermal gradients. It reviews the various determinations of heat-transfer coefficients by the thermal conductivity and diffusivity method, analytical and empirical methods, application of cooling curves, computational fluid dynamics, and the inverse conduction calculation and measurement of parts. Suitable examples are also provided.

Induction heating for hardening of steels has advantages from the standpoint of quenching because parts are individually processed in a controlled manner. This article provides information on the effect of agitation, temperature, hardening, residual stresses, and quenching media, on quenching. It also describes various quenching methods for steel induction heat treating, namely, spray quenching, immersion quenching, self or mass quenching, and forced air quenching. The article also reviews quench system design and quenchants and their maintenance.

This article describes various quenchants, namely, water and inorganic salt solutions, polymers (polyvinyl alcohol, polyalkylene glycol, polyethyl oxazoline, polyvinyl pyrrolidone and sodium polyacrylates), quench oils, and molten salts, which are used for heat treatment of ferrous alloys. It also provides information on the steps for controlling quenching performance for polymer quenchants and oils with an emphasis on measuring quenchant performance, safety measures, and oxidation.

This article provides the basics of overall quench process distortion. It describes the influence of quenching processes on the generation of distortion. Examples for the distortion behavior of different types of components are presented. Then, comparisons between different quenching processes are provided. The article presents some possibilities for minimization of shape changes by the quenching process itself. Several suggestions are given for quenching processes in evaporating fluids. An example is provided for out-of-roundness reduction for rings by well-defined inhomogeneous quenching in a gas nozzle field. Another example shows how intensive and high-speed quenching can help to reduce the bending of shafts with an asymmetrical cross-section. The last example shows the result when external loads and nonsymmetric quenching act together. The article also presents test samples for the judgment about distortion potential arising from heat treatment equipment.

The fluidized bed provides a means for exchanging heat between a metal part, the solid particles, and the fluidizing gas and which is viable for quenching. This article briefly considers the design aspects of the gas distributor, plenum, container, immersed cooling tubes and surface air spray cooling system in the quenching fluidized bed. It describes the fundamental factors affecting quenching power of the fluidized beds, namely, particle size, particle material, fluidizing gas composition, fluidizing gas flow rate, bed temperature and pressure, and the arrangement of quenched parts with respect to one another and to the bed. The article discusses the advantages, disadvantages, various applications and processes, including conventional batch quenching, two-step batch quenching, and continuous quenching of fluidized bed quenching, in detail.

Ultrasonic cleaning involves the use of high-frequency sound waves that is above the upper range of human heating, or about 18 kHz, to remove a variety of contaminants from parts immersed in aqueous media. This article describes the process, design considerations and the equipment in ultrasonic cleaning. The components used in the generation of ultrasonic wave include piezoelectric and magnetostrictive transducers that are used in ultrasonic generators and tanks. The effects of solution type and its temperature on the effectiveness of ultrasonic cleaning are also discussed.

In this article, a metallurgical overview of the hardening process is provided. This overview is followed by the methodology involved in obtaining cooling curves, the currently accepted standardized methods of testing, and the use of newer methods of cooling curve data interpretation that describe the quenching process.

This article provides information on single-shot and scanning, the two types of induction heat treating processes that are based on whether the induction coil is moving relative to the part during the heating process. It describes the effect of the frequency of induction heating current on the induction coil and process design, and the control of heating in different areas of the inductor part. The article reviews three main tools for adjustment of coil design and fabrication: coupling gap, coil copper profile, and magnetic flux controllers. It examines the method of holding a part and presenting it to the inductor during the initial inductor design. The article provides information on coil leads/busswork and contacts that mechanically and electrically connect the induction coil head to the power supply. It concludes with a discussion on flux and oxide removal, leak and flow checking, silver plating, and electrical parameter measurement.

Induction heating has many different applications, such as melting, heating stock for forging, and heat treating. This article begins with a discussion on the types of power supplies, namely, solid-state power supplies and oscillator tubes. It provides information on system elements, including cooling systems, power supplies, heat stations, work handling fixtures, induction or work coils, and quench systems. The article discusses the influence of system elements on induction heat treating system design. It also deals with the general theory, types, and applications of induction coils.

This article provides information on the boundary conditions that must be applied to model the heat-transfer coefficient (HTC) in a component being cooled. It describes the historical perspective of various experiments to determine the HTCs. Computational fluid dynamics codes have also been used to predict the HTCs around a part. The article provides information on the various modeling studies used to predict cooling rates in a component. The prediction of residual stresses by validation and optimization of residual stress models is also discussed. Several techniques, such as models neglecting and incorporating material transformation effects, used to predict residual stresses are reviewed. The article also explains the various aspects of models used to prevent cracking during heating and quenching.

Induction heat treating is used in the off-road machinery industry for hardening steel and cast iron components used in a wide range of applications. This article focuses on the usage of induction hardening components in the industry, and discusses the basic requirements of steel and cast iron to undergo induction hardening. It provides a comparison on single-shot and scan hardening methods to select the suitable one for induction heat treating of gears and sprockets. The article describes the effect of microstructure, residual stress, and workpiece position on induction hardening. It concludes with a discussion on the important factors to be considered during the installation of off-road machinery components.