This article provides an introduction to the additive manufacturing (AM) terminology. The article describes the input and output of the AM process. It explains AM process categories, providing comments on the international standard on AM terminology, ISO/ASTM 52900.

This article is a compilation of terms related to analysis and prevention of engineering failures.

This article is a compilation of terms related to friction, lubrication, and wear technology.

This glossary is a compilation of terms related to the analysis and prevention of component and equipment failures. It is intended to help promote clear thinking and useful failure analysis. The definitions presented are those used in this Volume and reflect a common and modern understanding of these terms as used in the literature and in reports by practicing failure analysts.

This article is a compilation of terms and definitions related to failure analysis and prevention. This glossary is intended to help promote clear thinking and useful failure analysis. The definitions presented are those used in this volume and reflect common and modern understanding of these terms as used in the literature and in reports by practicing failure analysts.

This article presents a glossary of terms related to welding. The terms are arranged in the conventional dictionary letter-by-letter alphabetical sequence.

To improve the performance of additive manufacturing (AM) systems, a critical need exists for collaborative generation, acquisition, curation, and analysis of digital AM data across the product life cycle. This article discusses the history, development, and potential benefits of the AM Common Data Dictionary (AM-CDD), along with future directions.

This article details findability, accessibility, interoperability, and reusability (FAIR) additive manufacturing data management principles and examines related motivations, benefits, and challenges. It explains opportunities to advance the state of the AM community efforts in fostering FAIR data management practices/principles and outlines the consequence of such efforts on technology maturation and industrialization for AM technologies.

This article presents the history of standardization in additive manufacturing (AM). It explains the need and structure for standardization in AM, including the application of AM standards by the industry sector. It also presents the primary purposes of these standards to create AM qualification and certification frameworks.

Failure analysis is a process of acquiring specified information regarding the appropriateness of the design of a part, the competence with which the various steps of its manufacture have been performed, any abuse suffered by it in packing and transportation, or the severity of service under which failure has occurred. Beginning with a discussion of the various stages of failure analysis of glass and ceramic materials, this article focuses on descriptive and quantitative fracture surface analysis techniques that are used in the examination of glass and surfaces created by fracture and the interpretation of the fracture markings seen on these surfaces. Details are provided for the procedures for locating fracture origins, determining direction of crack propagation, learning the sequence of crack propagation, deducing the stress state at the time of fracture, and observing interactions between crack fronts and inclusions, etc. A separate fractography terminology is provided in this article.

Additive manufacturing, as the first fully digital manufacturing process, is critically dependent on data, including the input materials, the process parameters guiding the three-dimensional printing process execution, any postprocessing steps, and any inspections performed on the printed coupons and/or parts, to name just a few examples. This article presents the standards to enable findable, accessible, interoperable, and reusable (FAIR) data. It then discusses three main types of data models that are used to capture different levels of detail and granularity of data: conceptual, logical, and physical. Different approaches and techniques with their own strengths and weaknesses are developed to model data. Four of the major types of data models include hierarchical, relational, object-oriented, and network/graph-based. The article also presents the evolution of data management approaches. It then describes the characteristics of effective logical data models.

This article explains the key features of the manufacturing techniques for polymer composites. It describes the selection of a technically and economically feasible manufacturing technique for a composite design. The article discusses widely accepted and emerging techniques to manufacture polymer composites such as open-mold techniques.

The organizations that are most active in the development of standards for powder metallurgy (PM) are the American Society for Testing and Materials (ASTM), Metal Powder Industries Federation (MPIF), and International Standards Organization (ISO). This article presents the test method standards, materials standards, and material designation codes for PM materials. It provides information on the codes for structural parts, PM soft magnetic materials, PM self-lubricating bearings, metal injection molded materials, and powder forged materials.

Thermal analysis is used to analyze solidification processes by recording the temperature as a function of time during cooling or heating of a metal or alloy to or from a temperature above its melting point. This article describes the use of cooling curves for analyzing a solidification process, such as the solidification temperature, structure analysis, fraction of phases and heat of fusion with focus on solidification of cast iron, and the use of cooling curves to control and adjust the casting conditions. It discusses deviations from equilibrium that occur due to kinetic effects during solidification. The article also illustrates the evaluation of fraction of solid formed during the precipitation of austenite from heat balance.

This article describes the methodology for performing a failure modes and effects analysis (FMEA). It explains the methodology with the help of a hot water heater and provides a discussion on the role of FMEA in the design process. The article presents the analysis procedures and shows how proper planning, along with functional, interface, and detailed fault analyses, makes FMEA a process that facilitates the design throughout the product development cycle. It also discusses the use of fault equivalence to reduce the amount of labor required by the analysis. The article shows how fault trees are used to unify the analysis of failure modes caused by design errors, manufacturing and maintenance processes, materials, and so on, and to assess the probability of failure mode occurrence. It concludes with information on some of the approaches to automating the FMEA.

This article is a comprehensive collection of terms related to corrosion fundamentals, testing, and protection.

This article presents a comprehensive collection of the definition of terms related to metallurgy.

This article is a brief guide to information sources on thermal spray technology. The sources provided by ASM International and the Thermal Spray Society (TSS) include magazines and journals as well as reference books, including the ASM Handbook series, conference proceedings, newsletters, education courses, and videos. The article provides information on the specifications, standards, and quality control for coatings.

Additive manufacturing (AM) processes fabricate parts in a layer-by-layer manner by which materials are added and processed repeatedly. This article introduces the general concepts and approaches to design for AM (DFAM) and outlines important implications for part characteristics, design opportunities, manufacturing practices, supply chains, and even business models. It presents contrasting perspectives on DFAM, followed by a discussion on more general and overarching opportunistic design methods and on design for constraints, similar to conventional DFM. It concludes with a presentation of a design approach to the AM process chain, acknowledging that AM-fabricated parts typically undergo several postprocessing steps and that it is important to design taking into account these steps.

This article briefly introduces the concepts of failure analysis and root cause analysis (RCA), and the role of failure analysis as a general engineering tool for enhancing product quality and failure prevention. It reviews four fundamental categories of physical root causes, namely, design deficiencies, material defects, manufacturing/installation defects, and service life anomalies, with examples. The article describes several common charting methods that may be useful in performing an RCA. It also discusses other failure analysis tools, including review of all sources of input and information, people interviews, laboratory investigations, stress analysis, and fracture mechanics analysis. The article concludes with information on the categories of failure and failure prevention.