This article begins with a discussion on the components and importance of flue gas desulfurization (FGD) technology used in power plant for pollution control. It further discusses the corrosion problems encountered in different operating zones of FGD system and the major forms of corrosive attack encountered in those zones, including crevice corrosion, pitting corrosion, and acid attack. The article concludes with information on the materials selection and design features for minimizing the possibility of corrosion.

Corrosion problems and materials selection for emissions control equipment can be difficult because of varied corrosive compounds present and the severe environments encountered. This article discusses the selection of materials for construction of flue gas desulfurization systems. It addresses the problems associated with materials for incinerator off-gas treatment equipment. The off-gases can be classified according to their corrosiveness as: industrial chemical, hospital, municipal solid, and sewage sludge. The article provides information on the selection of materials for the three most common types of dust collection equipment used in bulk solids processing, namely, fabric filters, electrostatic precipitators, and wet scrubbers. It also discusses a wide variety of corrosion problems encountered in chemical and pharmaceutical industries.

This article describes selected U.S. environmental statutes and regulations that are pertinent to material surface finishers. It provides information on the applicability, requirements, and permitting conditions of the Clean Air Act, the Resources Conservation and Recovery Act, the Superfund Amendments and Reauthorization Act, and the Clean Water Act.

This article discusses coating products available for use in the aerospace industry that are compliant with regulations requiring reductions in emissions from organic solvents. The coating products addressed include primers, topcoats, and chemical milling maskants. It describes their characteristics and limitations compared to conventional noncompliant materials. The article addresses the methods and products commonly used achieve regulatory compliance: waterborne coatings, exempt-solvent-based coatings, high-solids coatings, powder coating, and electro-deposition.

This article discusses Allenby's two streams for environmental aspects of design: generic and specific concerns. Generic concerns include guidelines that provide the structure in which specific techniques can be developed and used. Specific methods are environmentally responsible for design and specific information that engineers can use. These methods include life cycle assessment, environmental impact assessment, quality function deployment, design for “X”, failure modes and effects analysis, and design for disassembly.

This article describes the principal cladding processes and methods for calculating properties of clad metals. It reviews the designing processes of clad metals to achieve specific requirements. The article discusses six categories of clad metal systems designed for corrosion control: noble metal clad systems, corrosion barrier systems, sacrificial metal systems, transition metal systems, complex multilayer systems, and clad diffusion alloys.

Environmental and worker health regulations have increased the costs associated with cadmium coating application and cadmium-beating waste disposal, thus creating economic incentives for industrial users to seek cadmium plating replacements. This article presents a cadmium replacement identification matrix that includes information on the specifications, corrosion control performance, environment-assisted cracking, coating lubricity, environmental and worker health regulations, and cost and performance factors for various replacement processes.

This article presents a general survey of corrosive agents and processes that exist within what are usually considered the protective environments of museums and historic collections. It reviews the corrosion influencing factors, such as humidity, temperature, and light. The article provides a list of pollutants and their sources in museums and collections. It discusses the sources of corrosion, including plastic and wood, sulfur, and carbonyl compounds. The article describes the preservation steps for materials in museum to eliminate the corrosive sources acting on the objects and to avoid other potentially damaging materials.

This article presents a background of green chemistry and green coatings, and a summary of the key concerns of the green coating procurement process. It includes a discussion on green marketing and the seven sins of greenwashing, an overview of the environmental certification standards and regulatory environments, and the importance of performance during the duty cycle.

Simulated service testing is the most reliable predictor of corrosion behavior that is important for specific objectives. These include materials selection, predicting the probable service life of a product or structure, evaluating new commercial alloys and processes, and calibrating laboratory corrosion tests in short of in-plant tests and actual service experience. This article provides a detailed discussion on the types of atmospheres used in simulated service testing. It describes the specifics of atmospheric-corrosion test that include equipment, test arrangement, and test specimen; factors affecting atmospheric corrosion; and evaluation of exposed atmospheric-corrosion panels. The article concludes with a discussion on the empirical model used for analyzing the atmospheric-corrosion measurements for estimating the service life of the part being evaluated.

This article discusses the general properties of ocean water and their effects on corrosion. It describes the major and minor features of the ocean water on corrosion, including the effects of variability, pollutants, and fouling organisms. Effects of water flow velocity on marine corrosion are also reviewed.

Nickel in elemental form or alloyed with other metals and materials has made significant contributions to our present-day society and promises to continue to supply materials for a demanding future. This article provides a historical overview and physical metallurgy of nickel and nickel alloys. It lists and describes the compositions, mechanical and physical properties, and applications of commercial nickel and its alloys. The article briefly explains the forms of corrosion resulting from the exposure of nickel alloys to aqueous environments. It provides valuable information on the commercial forms of nickel alloys, namely, nickel-copper alloys, nickel-chromium and nickel-chromium-iron series, iron-nickel-chromium alloys, controlled-expansion alloys, nickel-iron low-expansion alloys, soft magnetic alloys, and welding alloys.

In high-iron-tonnage operations, the cupola remains the most efficient source of continuous high volumes of iron needed to satisfy high production foundries or the multiple casting machines of centrifugal pipe producers. This article explores successful improvement technologies in cupola equipment, including preheated air blast, recuperative hot blast systems, and duplex electric holders. It discusses the shell, intermittent or continuous tapping, tuyere and blower systems, refractory lining, water-cooled cupolas, emission-control systems, and storage and handling of the charge materials. The article provides a discussion on the control tests for cupola, including the chill test and mechanical test. It concludes with information on specialized cupolas such as the cokeless cupola and the plasma-fired cupola.

Various types of furnaces have been used for cast iron melting. In terms of tonnage, the primary melting methods used by iron casting facilities are cupola and induction furnaces. This article describes the operation and control principles of cupola furnace. It discusses the advantages of specialized cupolas such as cokeless cupola and plasma-fired cupola. Melting in iron foundries is a major application of induction furnaces. The article describes the operations of two induction furnaces: the channel induction furnace and the induction crucible furnace. It explains the teapot principle of pressure-actuated pouring furnaces and provides information on the effect of pouring magnesium-treated melts.

Ceramic and glass manufacturers take environmental regulations into consideration during all stages of the product cycle, from research and development to purchasing, processing, end use, and disposal. Ceramic and glass products are finding application in the construction industry and as raw materials for other processes. This article describes the recycling of in-process scrap and industrial wastes (fly ash, red mud, metallurgical waste, and other waste products), and applications of these recycled products. It focuses on environmental regulations such as Resource Conservation and Recovery Act and Clean Air Act. The Clean Air Act requires all states to meet minimum emissions standards for nitrogen-oxygen compounds, volatile organic compounds, and carbon monoxide.

Nickel and nickel-base alloys are vitally important to modern industry because of their ability to withstand a wide variety of severe operating conditions involving corrosive environments, high temperatures, high stresses, and combinations of these factors. This article discusses the mining and extraction of nickel and describes the uses of nickel. It discusses the categories of nickel-base alloys, including wrought corrosion-resistant alloys, cast corrosion-resistant alloys, heat-resistant alloys (superalloys), and special-purpose alloys. The article covers the corrosion resistance of nickel with the inclusion of varying alloying elements. It provides useful information on the behavior of nickel and nickel alloys in specific environments describes its corrosion resistance in certain acids, alkalis, and salts.

This article discusses the elements necessary for a galvanic cell operation. Detailed information on the possible corrosion reaction as a function of aqueous electrolyte concentration and pH, in the presence of certain ions, are provided using Pourbaix diagrams. A variety of atmospheric factors, climatic conditions, and air-chemical pollutants that determine the corrosiveness of the atmosphere and contribute to the metal corrosion process are discussed. The article reviews the phenomenon of precipitation runoff on the corroded metal surface and the corrosive microbial effect on metals. It describes the thermodynamics of atmospheric corrosion and models for predicting the corrosion damage of metals. The article concludes with information on the various trends in atmospheric corrosion research and methods for the corrosion processes.

This article describes the various environmental factors that cause corrosion on metal artifacts, which include water, temperature fluctuations, pollutants, local conditions of acidity or alkalinity, vegetation, and animals. The corrosion processes experienced by five common metals, such as copper alloys, iron alloys, lead, zinc, and aluminum, used in outdoor artifacts are discussed. Finally, the article reviews conservation and preservation strategies for these five as well as gilded metals.

Wipe solvents are used to remove contaminants from a workpiece before it undergoes manufacturing operations that require clean surfaces, such as bonding, sealing, painting, welding, plating, specialized surface treatment procedures, and others. This article describes the evaluation parameters for wipe solvent cleaners, including methyl ethyl ketone, methyl isobutyl ketone, trichloroethene, tetrachloroethylene, acetone, toluene, dichloromethane, benzene, xylene, and other alternate wipe solvent cleaners. It contains a table that lists the compositions and properties of wipe solvent cleaners.