Search Results for pharmaceutical ingredient

The application of three-dimensional printers can be revolutionary as a tool for the customization and personalization of pharmaceutical dosage forms. The areas of 3D printing applicable to pharmaceutical manufacturing can be segregated into three categories: extrusion technologies, powder-bed fusion, and stereolithography. Common extrusion-based technologies are fused deposition modeling and pressure-assisted microsyringe; powder-bed fusion is separated by binder jet and selective laser sintering. The synergies between pharmaceutical, or active pharmaceutical ingredient (API), and polymer printing are discussed in this article, with particular attention to how the incorporation of small-molecule APIs changes the material selection, design considerations, processing parameters, and challenges associated with each technology.

This article discusses the corrosion characteristics of superaustenitic stainless and duplex stainless steels, which are used in pharmaceutical industry. It describes passivation treatments and the electropolishing of stainless steels. The article informs that electropolishing is not a passivation treatment, although the proper execution of the process will result in a passive surface. The article concludes with a discussion on roughing, which is a phenomenon of particular interest to the pharmaceutical industry.

This article describes high-performance liquid chromatography and ultra-high-performance liquid chromatography that are used to separate and quantify the chemical components in any sample that can be dissolved in a liquid. This includes pharmaceutical drugs, medicinal plant extracts, food constituents, flavors, fragrances, industrial chemicals, pesticides, and pollutants. Readers are introduced to the most commonly employed mode, reverse-phase chromatography, with examples and an exclusive focus on commercially available instruments and consumables. The discussion covers the various processes involved in liquid chromatography, including assessing a separation of sample components, adjusting the mobile phase, choosing the stationary phase, optimizing a separation, preparing real samples, and analyzing complex samples.

This article discusses the materials of construction found in pharmaceutical production facilities. The materials discussed are different stainless steels, nickel and nickel-base alloys, titanium, zirconium, impervious graphite, fluoropolymers, and glass-lined steel. The article describes the three primary causes of failure in the manufacture of pharmaceuticals: embedded iron, failures of glass linings, and corrosion under thermal insulation.

This article discusses slurry molding that encompasses two distinct processes: plaster molding and ceramic molding. Plaster mold casting is a specialized casting process used to produce nonferrous castings that have greater dimensional accuracy, smoother surfaces, and more finely reproduced detail. The article describes three generally recognized plaster mold processes, namely, conventional plaster mold casting, the Antioch process, and the foamed plaster process. Ceramic molding techniques are based on processes that employ permanent patterns and fine-grained zircon and calcined, high-alumina mullite slurries for molding. The Shaw process and the proprietary Unicast processes are also discussed.

The primary market for metal powder is the production of powder metallurgy (PM) parts, which are dominated primarily by iron and copper powders. This article reviews the chemical and pyrotechnics applications of ferrous and nonferrous powders. It describes the characteristics of iron powder used in oxygen scavengers and chemical reactive warmers and heaters. Metal powders used as fuels in solid propellants, pyrotechnic devices, explosives, and similar applications are reviewed. Atomized aluminum, magnesium, tungsten, and zirconium powders are also discussed.

Phosphoric acid is less corrosive than sulfuric and hydrochloric acids. This article discusses the corrosion rates of metal alloys in phosphoric acid, including aluminum, carbon steel and cast irons, stainless steels, nickel-rich G-type alloys, copper and copper alloys, nickel alloys, lead, titanium alloys, and zirconium alloys. Nonmetallic materials may be chemically attacked in some corrosive environments, which can result in swelling, hardening, or softening phenomena; extraction of ingredients; chemical conversion of the nonmetallic constituents; cross-linking oxidation; and/or substitution reactions. The article also describes the corrosion resistance of nonmetallic materials such as rubber and elastomeric materials, plastics, carbon and graphite, and ceramic materials.

This article provides an overview of curing techniques, adhesive chemistries, surface preparation, adhesive selection, and medical applications of adhesives. The curing techniques are classified into moisture, irradiation, heat, and anaerobic. The article highlights the common types of curable adhesives used for medical device assemblies, including acrylics, cyanoacrylates, epoxies, urethanes, and silicones. Other forms of adhesives, such as hot melts, bioadhesives, and pressure-sensitive adhesives, are also discussed. The typical characteristics and applications of biocompatible medical device adhesives are listed in a table. The article concludes with a section on the selection of materials for medical adhesives.

Powder-bed fusion (PBF) is a group of additive manufacturing (AM) processes that includes selective laser sintering, selective laser melting, and electron beam melting. This article explains the processes and parameters of PBF systems that are used for biomedical applications. It also presents the desirable properties of biomedical devices and the advantages of using PBF systems for biomedical applications.

This article introduces the fundamental concepts and the essential components of liquid chromatography (LC). It discusses the different modes of LC, such as liquid-solid chromatography, liquid-liquid chromatography, bonded-phase chromatograph, normal-phase chromatography, reversed-phase chromatography, ion-exchange chromatography, ion-pair chromatography, and size-exclusion chromatography. The article also includes a discussion on the qualitative and quantitative analyses and the applications of LC.

Polymeric floor coatings refer to flooring materials composed of multicomponent thermoset resins formulated with various fillers and pigments that are installed in situ, usually over concrete substrates. Polymeric flooring systems, specified for all industrial and commercial environments, use a variety of polymer chemistries and are constructed in a variety of methods and designs. This article provides a description of the service conditions for the polymeric flooring systems. It provides information on polymeric flooring systems, including thin-film coatings, self-leveling systems, membrane systems, broadcast systems, troweled systems, and terrazzo. The article also focuses on properties, applications, testing, and factors and requirements to be considered during the installation of polymeric floor coatings. It concludes with a discussion about coating failures, including bonding, cracking, chemical attack, and moisture that affect the polymeric floor coatings on concrete.

This article provides an overview of the types, properties, and applications of traditional and advanced ceramics and glasses. Principal product areas for traditional ceramics include whitewares, glazes, porcelain enamels, structural clay products, cements, and refractories. Advanced ceramics include electronic ceramics, optical ceramics, magnetic ceramics, and structural ceramics.

Metal powders are used as fuels in solid propellants, fillers in various materials, such as polymers or other binder systems, and for material substitution. They are also used in food enrichment, environmental remediation market, and magnetic, electrical, and medical application areas. This article reviews some of the diverse and emerging applications of ferrous and nonferrous powders. It also discusses the functions of copier powders and the processes used frequently for copier powder coating.

This article discusses several aspects of biocompatibility of polymers, including the selection of a suitable polymer, specific use of a material, contact of polymer on body site, and duration of the contact. It describes the factors influencing the biological response of the polymer from a biocompatibility perspective. These include raw materials, the manufacturing process, cleaning and sterilization processes, and biodegradation and biostability. The article reviews the general testing methods of polymers, such as chemical, mechanical and thermal. It concludes with a section on the guidance, provided by the regulatory authorities, on the biocompatibility testing of polymers and polymer-containing devices that can aid in selecting the right analysis.

This article focuses on the mineral and organic acid cleaning of iron and steel. It begins with a discussion on the application methods, process selection criteria, solution composition, equipment used, and control of process variables in mineral acid cleaning. The article then describes the advantages and disadvantages of organic acid cleaning. Applications, including boiler cleaning, stainless steel cleaning, and removal of iron- and copper-bearing deposits, are discussed. The article concludes with an overview of acid cleaning of nonferrous alloys.

Gas analysis by mass spectrometry, or gas mass spectrometry, is a general technique using a family of instrumentation that creates a charged ion from a gas phase chemical species and measures the mass-to-charge ratio. This article covers gas analysis applications that do not use chromatographic separation to physically isolate components of the sample prior to analysis. It is intended to provide an understanding of gas analysis instrumentation and terminology that will help make informed decisions in choosing an instrument and methodology appropriate for the data needed. Mass-analyzer technologies for gas mass spectrometry, namely quadrupole mass filters, magnetic sector mass filters, and time-of-flight mass analyzers are covered. Common factors to consider in choosing an analyzer for static or continuous gas measurement are also described. In addition, the article presents some examples of applications of gas mass spectrometry.

This article addresses several distinct aspects of corrosion that should be taken into account when solving the corrosion problems in the food and beverage industries. It summarizes the role of international standards in developing food and beverage industries: the American Society of Mechanical Engineers (ASME), American Welding Society (AWS), and Food and Drug Administration (FDA). The article tabulates the approximate pH values of various foods. It describes the contamination of food products by corrosion. A discussion on specific stainless steels, their corrosion resistance, fabrication, and applications is presented and compared to other potential materials of construction. The article also presents case studies of stainless steel corrosion and concludes with a discussion on corrosion in cleaning and sanitizing processes.

This article discusses the family characteristics, commercial forms, applications, resin grades, and mechanical and physical properties of traditional engineering thermoplastics in their neat (unmodified) form and as compounds and composites, namely, acrylonitrile-butadiene-styrenes, acrylics, high-density polyethylenes, reinforced polypropylenes, high-impact polystyrenes, polyvinyl chloride, styrene-acrylonitriles, and styrene-maleic anhydrides.