Blow molding has emerged as a commercially viable process for manufacturing parts for nonpackaging/industrial markets. This article discusses the machinery required, processing methods, mold types, process parameters, part designs and material distribution of blow molding. It provides an outline of the parison programming system equipped with blow molders to control the parison thickness. The article describes factors that are usually considered to minimize material distribution problems, namely, design, material selection, process control, part performance, and cost.

This article discusses technologies focused on processing plastic materials or producing direct tools used in plastics processing. The article focuses on extrusion and injection molding, covering applications, materials and their properties, equipment, processing details, part design guidelines, and special processes. It also covers the functions of the extruder, webline handling, mixing and compounding operations, and process troubleshooting. Thermoforming and mold design are covered. Various other technologies for polymer processing covered in this article are blow molding, rotational molding, compression molding, transfer molding, hand lay-up process, casting, and additive manufacturing.

This article explores the possibilities and limitations imposed by manufacturing processes and materials. Detailed design rules for the processes are presented. The article lists the main features of process groups in a tabular form. The physical characteristics and ratings of relative cost and production factors are also tabulated. The process groups include casting; deformation; powder processing; machining; noncutting; joining; ceramic, glass, and polymer processing; and composites manufacturing.

This article is a compilation of definitions for terms related to engineering materials, including plastics, elastomers, polymer-matrix composites, adhesives and sealants, ceramics, ceramic-matrix composites, glasses, and carbon-carbon composites.

This article is a compilation of definition of terms related to materials selection and its integration with engineering design processes.

Particle-induced x-ray emission (PIXE) is one of several quantitative analyses based on characteristic x-rays. This article provides a detailed account on the principles of PIXE, discussing the data-reduction codes used to identify, integrate, and reduce x-ray peaks into elemental concentrations. It provides information on the calibration of PIXE analysis, which is mostly performed using gravimetric standards to avoid serious absorption, refluorescence, or ion energy change corrections. A comparative study on PIXE and x-ray fluorescence is also included. Finally, the article discusses the applications of PIXE in three areas, namely, atmospheric physics and chemistry, external proton milliprobes and historical analysis, and PIXE microprobes.

Induction heating for glass melting is an alternative to resistance heating element furnaces. This article provides information on the basics of glass fabrication process. It focuses on crucible melt furnace for small-scale glass melting and the induction melting process. It also describes induction glass forming (forming from the melt) and glass forming by induction heating (post-melt). The article compares the benefits of using induction heating and refractory-lined resistance heating.

This article provides a discussion on probes for laboratory tests and resultant curves of industrial quenching processes. It describes the scope of the tests, and the calculation of heat-transfer coefficient (HTC) based on the tests. The article highlights the differences between the laboratory tests and characterization of industrial quenching processes. It reviews the importance of initial heat-flux density and first critical heat-flux density. The theoretical principle behind and the purpose of the temperature gradient method are discussed. The article provides information on the design of the probe, heat-extraction dynamics, and influence of wetting kinematics. It also includes discussions on the simplified 1-D temperature-distribution model, calculation of the HTC, and the finite-volume method for the heat-conduction equation.

The large majority of the commercially important glasses are processed from a carefully calculated batch of raw materials that is then melted in special furnaces. Providing an introduction to melting practices of glass production, this article focuses on various finishing methods of glass products, including forming, grinding and polishing, and explores the advantages, disadvantages and steps involved in sol-gel process. It also discusses the types, processes and properties of annealed, laminated, and tempered glass, and presents the steps involved in glass decoration. The article gives a detailed account of production, properties and application of fiberglass, optical fibers, glass spheres and ceramic glasses, and describes the forms, classification, compositions and properties of glass/metal and glass-ceramic/metal seals.

X-ray powder diffraction (XRPD) techniques are used to characterize samples in the form of loose powders, aggregates of finely divided material or polycrystalline specimens. This article provides a detailed account of XRPD. It begins with a discussion on XRPD instrumentation and the techniques used to characterize samples. The article then describes the principles, advantages, and disadvantages of various types of powder diffractometers. A section on the Rietveld method of diffraction analysis is then presented. The article discusses various methods and procedures for qualifying and quantifying phase mixtures in powder samples. It provides information on typical sensitivity and experimental limits on precision of XRPD analysis and other systematic sources of errors that affect accuracy. Some of the factors pertinent to the estimation of crystallite size and defects are also presented. The article ends with a few application examples of XRPD.

This article provides practical information and data on property development in engineering plastics. It discusses the effects of composition on submolecular and higher-order structure and the influence of plasticizers, additives, and blowing agents. It examines stress-strain curves corresponding to soft-and-weak, soft-and-tough, hard-and-brittle, and hard-and-tough plastics and temperature-modulus plots representative of polymers with different degrees of crystallinity, cross-linking, and polarity. It explains how viscosity varies with shear rate in polymer melts and how processes align with various regions of the viscosity curve. It discusses the concept of shear sensitivity, the nature of viscoelastic properties, and the electrical, chemical, and optical properties of different plastics. It also reviews plastic processing operations, including extrusion, injection molding, and thermoforming, and addresses related considerations such as melt viscosity and melt strength, crystallization, orientation, die swell, melt fracture, shrinkage, molded-in stress, and polymer degradation.

Electron probe microanalysis (EPMA) makes it possible to combine structural and compositional analysis in one operation. This article describes the basic concepts of microanalysis and the processing of EPMA that involves the measurement of the characteristic X-rays emitted from a microscopic part of a solid specimen bombarded by a beam of accelerated electrons. It provides information on the various aspects of energy-dispersive spectrometry (EDS) and wavelength-dispersive spectrometry (WDS), and elucidates the qualitative analysis of the major constituents of EDS and WDS. The article includes information on the analog and digital compositional mapping of elemental distribution, and describes the strengths and weaknesses of WDS and EDS spectrometers in X-ray mapping. It also outlines the application of EPMA for solving various problems in materials science.

This article discusses the most fundamental building-block level, atomic level, molecular considerations, intermolecular structures, and supermolecular issues. It contains a table that shows the structures and lists the properties of selected commodity and engineering plastics. The article describes the effects of structure on thermal and mechanical properties. It reviews the chemical, optical, and electrical properties of engineering plastics and commodity plastics. An explanation of important physical properties, many of which are unique to polymers, is also included. The factors that must be considered when processing engineering thermoplastics are discussed. These include melt viscosity and melt strength; crystallization; orientation, die swell, shrinkage, and molded-in stress; polymer degradation; and polymer blends.

Field ion microscopy (FIM) can be used to study the three-dimensional structure of materials, such as metals and semiconductors, because successive atom layers can be ionized and removed from the surface by field evaporation. The ions removed from the surface by field evaporation can be analyzed chemically by coupling to the microscope a time-of-flight mass spectrometer of single-particle sensitivity, known as the atom probe (AP). This article describes the principles, sample preparation, and quantitative analysis of FIM. It also provides information on the principles, instrument design and operation, mass spectra and their interpretation, and applications of AP microanalysis.

Infrared (IR) spectroscopy is a useful technique for characterizing materials and providing information on the molecular structure, dynamics, and environment of a compound. This article provides the basic principles and instrumentation of IR spectroscopy. It discusses the sampling techniques of IR spectroscopy, namely, attenuated total reflectance spectroscopy, diffuse reflectance spectroscopy, infrared reflection-absorption spectroscopy, emission spectroscopy, and photoacoustic spectroscopy, and chromatographic techniques. Explaining the qualitative analysis of IR spectroscopy, the article provides information on spectral absorbance-subtraction, analysis of components in spectral matrix mixture, and determination of exact peak location of broad profiles. It discusses the quantitative analysis that mainly includes Beer's law for single compound in single wave number. The article also exemplifies the applications of IR spectroscopy.