This article contains a table that lists the values of nominal compositions and composition limits of wrought aluminum alloys.

This article contains a table that lists the values of nominal compositions and composition limits of aluminum alloy castings.

Wrought 4xxx alloys (extrusions and forgings) exhibit high surface hardness, wear resistance, and a low coefficient of thermal expansion. This article provides a summary of brazing filler metals used to join brazeable aluminum-base metals. It contains tables that list the nominal composition and filler-metal alloys of 4xxx series used in structural forms.

Rolling-element bearings, whether ball bearings or roller bearings with spherical, straight, or tapered rollers, are fabricated from a wide variety of steels. This article discusses the production process, characteristics, nominal compositions, and types of bearing steels. These include standard bearing steels, such as high-carbon bearing steels and carburizing bearing steels; and special-purpose bearing steels, such as high-temperature service bearing steels and corrosion-resistant bearing steels.

Directionally solidified (DS) and single-crystal (SX) superalloys and process technology are contributing to significant advances in turbine engine efficiency and durability. These gains are expected to arise from the development of higher creep strength and improved oxidation-resistant SX alloy compositions as well as from the development of SX casting and fabrication technology to utilize advanced transpiration-cooling schemes. This article provides a detailed discussion on the chemistry and castability of first- and second-generation DS and SX superalloys. It summarizes the chemistry modifications applied to MAR-M 247 to develop CMSX-2 with respect to function and objectives. The article also lists the nominal compositions of first- and second-generation DS and SX superalloys.

Oxide dispersion-strengthened (ODS) alloys are produced by mechanical alloying, a process by which base metals and alloying particles are powdered together forming a metal-matrix composite. This article discusses the production of ODS superalloy powders and subsequent processing steps, including consolidation, hot rolling, heat treating, and the fabrication of mill products. It also discusses the nominal composition and microstructure of commercial ODS alloys, including nickel, iron, and aluminum-base systems, and provides detailed information on their mechanical, physical, oxidation, and hot-corrosion properties.

This article provides a discussion on cutting tools, their materials and design; cutting fluids; and various aspects of machining operations of heat-resistant alloys, with several examples. Operations such as turning, planing and shaping, broaching, drilling, reaming, counterboring and spotfacing, tapping and thread milling, milling, sawing, and grinding are discussed. Nominal compositions of wrought heat-resistant alloys and nickel-base heat-resistant casting alloys, as well as compositions of cobalt-base heat-resistant casting, iron-base heat-resistant casting, and mechanically alloyed (oxide dispersion strengthened) products are also listed.

Blending of powders is defined as the thorough intermingling of powders of the same nominal composition. Premixing is the preparation of a uniform mixture of two or more components. This article provides information on the blending and premixing variables required to produce adequate results in the powder mixture. It describes the effects of metal powder characteristics on blending and mixing: particle size, shape, density, and surface features. The article also provides information on the equipment, tumble-type blenders, and low-shear agitated-type blenders used for blending and premixing solids.

Copper alloy castings are used in applications that require superior corrosion resistance, high thermal or electrical conductivity, good bearing surface qualities, or other special properties. This article discusses the nominal composition and mechanical properties of copper casting alloys, designated in the Unified Numbering System. It also describes the selection factors of copper casting alloys, including castability, machinability, dimensional tolerances, bearing and wear properties, and cost considerations. The article provides information on the relative corrosion resistance of 14 different classes of copper casting alloys in a wide variety of liquids and gases which helps in selecting alloys for corrosion service.

This article discusses the chief magnetic characteristics of permanent magnet materials. It provides a detailed description on nominal compositions; principal magnet designations; magnetic, physical, and mechanical properties; selection criteria; and applications of the permanent magnet materials, which include magnet steels, magnet alloys, alnico alloys, platinum-cobalt alloys, cobalt and rare-earth alloys, hard ferrites, iron-chromium-cobalt alloys, and neodymium-iron-boron alloys.

Mixtures of acids or acids and salts are of great importance to the chemical process industry (CPI) for use in digestion of solids, as a promoter in reactions, as a scale remover, and as a complexant. This article emphasizes the assessment of the performance of Ni-Fe-Cr-Mo alloys in mixed acids and salts in an objective manner. It tabulates the nominal compositions of pertinent Ni-Fe-Cr-Mo corrosion-resistant alloys. The article describes the acid and acid-plus-salt mixtures classified into the following general categories: nonoxidizing acid mixtures (H 2 SO 4 +H 3 PO 4 ), nonoxidizing acids with halides (H 2 SO 4 +HCl), oxidizing acid mixtures without halides (H 2 SO 4 +HNO 3 ), and oxidizing acid mixtures with halides (HNO 3 +HF). It also illustrates the effect of alloying elements on the corrosion rate in the nonoxidizing mixtures and oxidizing acid mixtures.

This article tabulates the nominal compositions for nickel and cobalt alloys. It illustrates the comparison of strain-hardening rates of a number of alloys in terms of the increase in hardness with increasing cold reduction. The forming practice for age-hardenable alloys and the lubricants used in the forming processes of nickel and cobalt alloys are also discussed. The article summarizes the modification of tools and dies used for cold forming other metals, as the physical and mechanical properties of nickel and cobalt alloys frequently necessitate it. It discusses forming techniques for these alloys and provides several examples of these techniques, which include shearing, blanking, piercing, deep drawing, spinning, explosive forming, bending, and expanding/tube forming.

This article provides information on the nominal compositions of high-carbon bearing steels and carburizing bearing steels. It discusses the bearing fundamentals with emphasis on surface contact, stresses, and fatigue life of bearings. The article describes bearing life prediction using three factors, namely, reliability, material, and application. It analyzes the bearing damage modes and concludes with information on fatigue failure considerations.

The most widely accepted alloy and temper designation system for aluminum and its alloys is maintained by the Aluminum Association and recognized by the American National Standards Institute (ANSI) as the American National Standard Alloy and Temper Designation Systems for Aluminum (ANSI H35.1). This article provides a detailed discussion on the alloy and temper designation system for aluminum and its alloys. The Aluminum Association alloy designations are grouped as wrought and cast alloys. Lengthy tables provide information on alloying elements in wrought aluminum and aluminum alloys; nominal composition of aluminum alloy castings; typical mechanical properties of wrought and cast aluminum alloys in various temper conditions; and cross references to former and current cast aluminum alloy designations.

This article focuses on various heat-treating practices, namely, normalizing, annealing, stress relieving, preheating, austenitizing, quenching, tempering, and nitriding for cold-work tool steels. The cold-work tool steels include medium-alloy air-hardening tool steels, high-carbon high-chromium tool steels, and high-vanadium-powder metallurgy tool steels. The article also describes the properties, types, nominal compositions and designations of these cold-work tool steels.

This article focuses on the tribological behavior of group 1, 2, and 3 cobalt-base alloys, namely, carbide-type wear-resistant alloys and laves-type wear-resistant alloys. The behavior includes hardness, yield strength and ductility, and fracture toughness. The article contains a table that lists the nominal compositions and typical applications of cobalt-base alloys. It discusses the properties and relative performance of specific alloys when subjected to the more common types of wear. These include abrasive wear, high-temperature sliding wear, rolling-contact fatigue wear, and erosive wear.