Search Results for metrology

This article presents the basic principle, characteristics, advantages, and disadvantages of resonant ultrasound spectroscopy (RUS) methods in additive manufacturing. It focuses on the two types of RUS methods: the swept-sine method and the impulse excitation method. Representative significant results for additively manufactured complex parts obtained with the different RUS systems are also shown. The article also presents the basic principle and examples of nonlinear RUS methods.

This article reviews nondestructive testing (NDT) and inspection techniques, namely liquid penetrant, magnetic particle, ultrasonics, X-ray, eddy current, visual and radiography that are commonly used to detect and evaluate flaws or leaks in an engineering system. This article compares the merits and limitations of these techniques and describes the various uses of NDT, including leak detection, metrology, structure or microstructure characterization, stress-strain response determination, and rapid identification of metals and alloys.

Microjoining with high energy density beams is a new subject in the sense that the progress of miniaturization in industry has made the desire to make microjoints rapidly and reliably a current and exciting topic. This article summarizes the current state of microjoining with both electron and laser beams. It considers the elementary physical processes such as heat and fluid flow to introduce the reader to the phenomena that affect melting, coalescence, and solidification needed for a successful microweld. The various forces driving (and resisting) fluid flow are analyzed. The article discusses the equipment suitable for microjoining and the metallurgical consequences and postweld metrology of the process. It also provides examples of developmental welds employing laser and electron beam microwelding techniques.

This article addresses electrochemical methods for instantaneous rate determination and threshold determination as well as nonelectrochemical methods that can determine incremental or cumulative rates of corrosion. Electrochemical methods for the study of galvanic corrosion rates and localized corrosion and evaluation of corrosion rates under paints are also discussed. The article describes nonelectrochemical methods that can determine incremental or cumulative rates of corrosion. Methods presented include polarization methods, polarization resistance methods, electrochemical impedance methods, frequency modulation methods, electrochemical noise resistance, potential probe methods, cyclic potentiodynamic polarization methods, potentiostatic and galvanostatic methods, electrochemical noise (EN) methods, scratch-repassivation method, and electrochemical impedance spectroscopy (EIS) techniques. Gravimetric determination of mass loss, electrical-resistance methods, magnetic methods, quartz crystal microbalance method, solution analysis methods, and metrological methods are nonelectrochemical methods. The article presents an electrochemical test that examines the susceptibility of stainless steel alloys to intergranular corrosion.

Nondestructive testing (NDT), also known as nondestructive evaluation (NDE), includes various techniques to characterize materials without damage. This article focuses on the typical NDE techniques that may be considered when conducting a failure investigation. The article begins with discussion about the concept of the probability of detection (POD), on which the statistical reliability of crack detection is based. The coverage includes the various methods of surface inspection, including visual-examination tools, scanning technology in dimensional metrology, and the common methods of detecting surface discontinuities by magnetic-particle inspection, liquid penetrant inspection, and eddy-current testing. The major NDE methods for internal (volumetric) inspection in failure analysis also are described.

Hardness characterizes the resistance of the ceramic to deformation, densification, displacement, and fracture. It is usually measured with conventional microindentation hardness machines using the Knoop or the Vickers diamond indenters. This article discusses the metrology issues of the Knoop and the Vickers hardness in ceramics. It explicates how to estimate fracture toughness from Vickers indentation cracking. The article also provides information on instrumented hardness testing and the Meyer law.

This article provides readers with a brief review of the applications of thermography in additive manufacturing (AM), which still is largely a research and development (R&D) effort. There is a particular focus on metals-based laser powder-bed fusion (L-PBF), although applications in directed-energy deposition (DED) and electron beam PBF (E-PBF) also are mentioned. The metrological basis of thermography is discussed in the article. Background information on radiation thermometry is provided, including how the various equations are applied. Finally, specific examples and lessons learned from various AM thermographic studies at the National Institute of Standards and Technology (NIST) are provided.

As additive manufacturing (AM) gains maturity as a manufacturing technique for production in many industrial sectors, inspection as a tool for quality control gains importance. This article is focused on the field of dimensional metrology, which is typically concerned with the verification of size, location, form, and surface topography of geometric features. This is split into two categories: geometric (size, location, form) and surface measurement (topography). The article also focuses on applicable inspection technologies, and it discusses the context within digital thread manufacturing. A case study on the Digital Inspection Requirements Enhancing Coverage and Traceability (DIRECT) is also presented.

X-ray radiography and computed tomography (CT) are nondestructive testing (NDT) tools particularly well suited to additive manufacturing (AM). A brief overview of NDT for AM is presented in this article, including other NDT methods, followed by identifying the key advantages and requirements for x-ray radiography and CT in AM. Less widely known applications of CT are also presented, including powder characterization, the evaluation of lattice structures, surface roughness measurements, and four-dimensional CT involving interrupted (before-after) CT scans of the same parts, or even in situ scans of the same part subjected to some processing or loading conditions. The article concludes with a discussion on the limits and some guidelines for the use of x-ray and CT for various AM materials.

This article provides a discussion on general nondestructive evaluation (NDE) science and considerations for specific technique selection. It explains the basic concept of flaw detection and evaluation and probability of detection. The article provides an overview of NDE methods with their applications, limitations, and advantages. It includes details on NDE codes, calibration standards, inspection frequency, guidance on how to perform inspections, applicability, and mandatory and nonmandatory practice. The article also provides tips on where to focus inspections in order to align with the likely areas of damage or degradation and a number of other aspects of inspection.

In situ process monitoring includes any technologies that monitor or inspect during an additive manufacturing (AM) process. This article presents the types, process considerations, and challenges of in situ monitoring technologies that can be implemented during an AM process. The types include system health monitoring, melt pool monitoring, and layer monitoring. The article discusses data analysis, and provides an overview of the integration of sensors into AM machines.

This article surveys common additive manufacturing (AM) data-acquisition methods, covering preprocess materials characterization in the lab, machine calibration in the field, in-process monitoring during a build, and the postprocess part inspections and tests. The focus is to identify acquisition-related metadata for AM data sets to improve data usability and reusability. Also included in the article are exemplar metadata definitions for a data set acquired from light-scattering-based particle size analysis.

This article covers defect formation and classification, followed by a brief description of the most common nondestructive testing (NDT) methods used for postbuild inspection. Descriptions of the established and emerging NDT techniques for in-process monitoring (IPM) and in-process inspection (IPI) in additive manufacturing (AM) also are provided, highlighting the advantages and limitations. The article concludes with a list of the main NDT methods and techniques used. As qualification and certification of AM parts is an urgent matter for the AM industry, a description of the current work carried out for developing standards is also included.

This article is an overview of the division Surface Analysis of this volume. The division covers various developed surface-analysis techniques, such as scanning probe and atomic force microscopy. The division focuses on the analysis of surface layers that are less than 100 nm. A quick reference summary of surface-analysis methods is presented in this article.

Computed tomography (CT) is an imaging technique that generates a three-dimensional (3-D) volumetric image of a test piece. This article illustrates the basic principles of CT and provides information on the types, applications, and capabilities of CT systems. A comparison of performance characteristics for film radiography, real-time radiography, and X-ray computed tomography is presented in a table. A functional block diagram of a typical computed tomography system is provided. The article discusses CT scanning geometry that is used to acquire the necessary transmission data. It also provides information on digital radiography, image processing and analysis, dual-energy imaging, and partial angle imaging, of a CT system.

Part quality in additive manufacturing (AM) is highly dependent on process control, but there is a lack of adequate AM control methods and standards. Laser powder-bed fusion (L-PBF) is one of the most-used metal AM techniques. This article focuses on the following laser control parameters: laser focus, laser power, laser position, and laser power-position synchronization. It then provides a discussion on laser scan strategies. The article also provides an overview of the AM control framework, the two major sections of which are software and hardware.

Additive manufacturing (AM) is the process of joining materials to make parts from three-dimensional (3D) model data, usually layer upon layer, as opposed to subtractive manufacturing and formative manufacturing methodologies. This article discusses various defects in AM components, such as porosity, inclusions, cracking, and residual stress, that can be avoided by using vendor recommended process parameters and approved materials. It describes the development of process-structure-property-performance modeling. The article explains the practical considerations in nondestructive evaluation for additively manufactured metallic parts. It also examines nondestructive testing (NDT) inspection and characterization methods for each of the manufacturing stages in their natural order. The article provides information on various inspection techniques for completed AM manufactured parts. The various electromagnetic and eddy current techniques that can be used to detect changes to nearsurface geometric anomalies or other defects are also discussed. These include ultrasonic techniques, radiographic techniques, and neutron imaging.