Search Results for metal-transfer control

This article provides the basic physics of the two most widely used arc welding processes: gas tungsten arc welding and gas metal arc welding. It describes the various control parameters of these processes such as arc length control, voltage control, heat input control, and metal-transfer control.

Heat and mass transfer in arc welding is normally studied from the standpoint of the weld pool and heat-affected zone. This article examines the heat and mass transfer from the arc to the base metal during the gas metal arc welding process. It also provides information on the selecting parameters for the development of welding procedures.

Sintering atmosphere protects metal parts from the effects of contact with air and provides sufficient conduction and convection for uniform heat transfer to ensure even heating or cooling within various furnace sections, such as preparation, sintering, initial cooling, and final cooling sections. This article provides information on the different zones of these furnace sections. It describes the types of atmospheres used in sintering, namely, endothermic gas, exothermic gas, dissociated ammonia, hydrogen, and vacuum. The article concludes with a discussion on the furnace zoning concept and the problems that arise when these atmospheres are not controlled.

Sputtering is a nonthermal vaporization process in which atoms are ejected from the surface of a solid by momentum transfer from energetic particles of atomic or molecular size. Ionized gases in plasma nitriding chambers often possess enough energy to sputter atoms from workload, fixturing, and racking surfaces that are then redeposited to the benefit or detriment of the nitriding process. This article explains how and why sputtering occurs during plasma nitriding and how to recognize and control its effects. It reviews the factors that influence the intensity of sputtering and its effects, whether positive or negative, on treated parts. It also provides recommendations for improving outcomes when nitriding titanium alloys, ferrous metals, particularly stainless steels, and components with complex geometries.

Plasma arc welding (PAW) can be defined as a gas-shielded arc welding process where the coalescence of metals is achieved via the heat transferred by an arc that is created between a tungsten electrode and a workpiece. This article focuses on the operating principles and procedures, current and operating modes, advantages, disadvantages, and applications of PAW. It discusses the personnel and equipment requirements, as well as the joints used in the process. The power source, plasma control console, water cooler, welding torch, and gas supply system for the plasma and shielding gases are also reviewed.

Plasma arc welding (PAW) can be defined as a gas-shielded arc welding process where the coalescence of metals is achieved via the heat transferred by an arc that is created between a tungsten electrode and a workpiece. This article discusses the melt-in mode and the keyhole mode of the PAW process, as well as the advantages and disadvantages. It describes the components of a basic PAW system, namely the power source, plasma control console, water cooler, welding torch, and gas supply system for the plasma and shielding gases. The article provides information on the applications of the PAW process and discusses the typical components and joints used. It concludes with information on personnel requirements and safety issues.

Gas-metal arc welding (GMAW) is an arc welding process that joins metals together by heating them with an electric arc that is established between a consumable electrode (wire) and a workpiece. This article discusses the advantages and limitations, operating principle, metal transfer mechanisms, and process variables of the GMAW process. The process variables include welding current, polarity, arc voltage, travel speed, electrode extension, electrode orientation, and electrode diameter. The major components of the basic equipment for a typical GMAW installation are discussed. The article also describes two consumable elements, such as electrode and shielding gas, of the GMAW process. It concludes with information on the safety aspects.

This article discusses various molten-metal treatments, namely fluxing, degassing, and molten-metal filtration. It focuses on various molten-metal handling systems for transporting, holding, or delivering molten metal to the mold/die system. These include launders, tundishes, holding furnaces or transport crucibles, molten-metal transfer pumps, teeming ladles, and dosing and pouring furnaces.

This article provides information on heat and mass transfer from the arc to the base metal in the gas-metal arc welding (GMAW) process. It discusses the development of welding procedures and the general operation of the process. The issues described in this article include the: total heat transferred to the base metal; partitioning of heat transfer between the arc and the molten electrode droplets; transfer modes of the droplets; role of the arc in droplet transfer; and simple model for welding procedure development based on an understanding of heat and mass transfer to the base metal.

This article discusses the operation principles, advantages, limitations, process parameters, consumables or electrodes, the equipment used, process variations, and safety considerations of gas metal arc welding (GMAW). It reviews the important variables of the GMAW process that affect weld penetration, bead shape, arc stability, productivity, and overall weld quality. These include welding consumables, equipment settings, and gun manipulation. The major components of a GMAW installation such as a welding gun, shielding gas supply, electrode feed unit, power source, and associated controls are discussed.

This article provides an overview of the methods used to control aspects of the arc welding process and research associated with the development of closed-loop feedback control of the process. Successful implementation of a closed-loop feedback control system requires sensing, modeling, and control. The article describes the commonly applied sensing techniques for arc welding control: arc sensing and nonimaging and imaging optics. It reviews the physics-based, empirically-derived, and neural network models for arc welding control. The article also discusses the research and development activities that attempt to extend the commercial, welding process controllers, namely, adaptive control, intelligent control, multivariable control, and distributed, hierarchical control.

This article examines a type of corrosion that occurs when solids (primarily metals) are exposed to liquid metal environments. It describes the principle mechanisms of liquid metal corrosion, including dissolution, impurity and interstitial reactions, alloying, and compound reduction. It also provides guidelines for materials selection and alloy development based on liquid metal corrosion reactions.

Electrochemical, or electrode, reactions occur with charge transfer between neutral or ionic reactants and a conducting material called the electrode. This article discusses cathodic reactions that result in reduction and anodic reactions that result in oxidation. It reviews the effects of an electric field near an electrode and illustrates the solvation of ions in metal-aqueous solution.

The shielding gas used in an arc welding process has a significant influence on the overall performance of the welding system. These gases are argon, helium, oxygen, hydrogen, nitrogen, and carbon dioxide. This article discusses the shielding gas selection criteria for plasma arc welding, gas metal arc welding, and flux cored arc welding. It describes the basic properties of shielding gases, namely, dissociation, recombination, reactivity potential, oxidation potential, and gas purity. The article also provides information on the influence of the shielding gas on weld mechanical properties and self-shielded flux cored arc welding.

The shielding gas used in a welding process has a significant influence on the overall performance of the welding system. This article discusses the basic properties of a shielding gas in terms of ionization potential, thermal conductivity, dissociation and recombination, reactivity/oxidation potential, surface tension, gas purity, and gas density. It describes the characteristics of the components of a shielding gas blend. The article discusses the selection of shielding gas for gas-metal arc welding (GMAW), gas-tungsten arc welding (GTAW), and plasma arc welding (PAW), as well as the influence of shielding gas on weld mechanical properties. It concludes with a discussion on flux-cored arc welding.

This article discusses the design parameters, operation, characteristics, properties, and advantages of various types of crucible furnaces, such as stationary, tilting, and movable furnaces. It also provides information on the application of the crucible furnaces.

Curing is the irreversible change in the physical properties of a thermosetting resin brought about by a chemical reaction, condensation, ring closure, or addition. This article discusses the material types and functions of various components considered in the preparation for curing. It presents a discussion on the major elements of an autoclave system, namely, pressure vessel, gas stream heating and circulation sources, gas stream pressurizing systems, loading systems, and vacuum systems. The article describes a computerized approach to the simultaneous control of materials reaction behavior and consolidation dynamics, using an autoclave as the reaction vessel.

Dross, which is the oxide-rich surface that forms on melts due to exposure to air, is a term that is usually applied to nonferrous melts, specifically the lighter alloys such as aluminum or magnesium. This article describes dross formation and ways to reduce it, the economic implications of dross, and in-plant enhancement or recovery of dross. It discusses the influence of the melter type on dross generation and the influence of charge materials and operating practices on melt loss. Fluxing is a word applied in a broad sense to a number of melt-treating methods. The article also discusses the in-furnace treatment with chemical fluxes.

Electropolishing is an electrochemical process that involves anodic dissolution of a metal specimen (anode electrode) in an electrolytic cell. This article reviews the two-electrode and three-electrode systems for electropolishing. It presents the equations of anodic reactions and the selection criteria of electrolyte for electropolishing. The article also describes the mechanism of electropolishing and the effect of electropolishing on properties of metals.