This article presents the following characteristics of pure metals : structure, chemical composition, mass characteristics, thermal properties, electrical properties, chemical properties, magnetic properties, optical properties, fabrication characteristics, nuclear properties, and mechanical properties.

Material properties are the link between the basic structure and composition of the material and the service performance of a part or component. This article describes the most significant properties that must be considered when choosing a metal for a given application, namely physical properties (mass characteristics and thermal, electrical, magnetic, radiation, and optical properties), chemical properties (corrosion and oxidation resistance) and mechanical properties (tensile and yield strength, elongation, toughness, hardness, creep, and fatigue). The article also contains tables that list room-temperature physical properties, vapor pressures, and mechanical properties for various metals.

This article addresses electrochemical methods for instantaneous rate determination and threshold determination as well as nonelectrochemical methods that can determine incremental or cumulative rates of corrosion. Electrochemical methods for the study of galvanic corrosion rates and localized corrosion and evaluation of corrosion rates under paints are also discussed. The article describes nonelectrochemical methods that can determine incremental or cumulative rates of corrosion. Methods presented include polarization methods, polarization resistance methods, electrochemical impedance methods, frequency modulation methods, electrochemical noise resistance, potential probe methods, cyclic potentiodynamic polarization methods, potentiostatic and galvanostatic methods, electrochemical noise (EN) methods, scratch-repassivation method, and electrochemical impedance spectroscopy (EIS) techniques. Gravimetric determination of mass loss, electrical-resistance methods, magnetic methods, quartz crystal microbalance method, solution analysis methods, and metrological methods are nonelectrochemical methods. The article presents an electrochemical test that examines the susceptibility of stainless steel alloys to intergranular corrosion.

This article is a compilation of property data for standard grades of cast copper alloys. Data are provided for mechanical, physical, thermal, electrical, chemical, nuclear, optical, and magnetic properties. The list for each alloy includes its common name, chemical composition, applications, mass characteristics, and fabrication characteristics.

Hyperthermia is a type of cancer treatment that requires directing a carefully controlled dose of heated nanoparticles to the cancerous tumor that leads to the destruction of cancer cells. Nanoparticles are used as the heat generating sources within the cancer cells and the tumors. The problem in controlling the temperature of nanoparticles is solved by the use of induction heating, which uses a high-frequency alternating magnetic field localized in the area of interest. This article provides an overview of this technique along with the description of its major components, namely, nanoparticles, induction heating setup, and magnetic field strength.

This article focuses on different aspects of wear particle analysis. It discusses the different wear regimes in the wear rate versus time (bathtub) curve. The article explains the essence of condition monitoring and how to properly sample lubricants for condition monitoring. It also discusses in-service lubricant analysis for condition monitoring, focusing on the spectrometric oil analysis program. The article describes the characteristics of wear particles and analytical techniques for characterizing them. It also describes the characteristics of different types of wear particles and the mechanisms by which they are generated. The article concludes with a summary of the major applications of wear particle analysis.

In an induction heating system, thermal and electromagnetic properties of heated materials make the greatest impact on the heat transfer and performance of induction heating process. This article focuses on major thermal properties, namely, thermal conductivity, heat capacity, and specific heat. It describes the two important electromagnetic properties, electrical resistivity (electrical conductivity) and magnetic permeability, which posses the most pronounced effect on the performance of the induction heating system, its efficiency, and selection of main design parameters. The article also discusses the magnetic properties of diamagnetic, paramagnetic, ferromagnetic, ferrimagnetic, antiferromagnetic, and metamagnetic materials.

Nuclear magnetic resonance (NMR) is a form of radio frequency spectroscopy based on interactions between nuclear magnetic dipole or electric quadrupole moments and an applied magnetic field or electric-field gradient. This article provides an overview of the fundamental principles of nuclear magnetic resonance with emphasis on nuclei properties, the basic equation of nuclear magnetic resonance, the classical theory of nuclear magnetization, line broadening, and measurement sensitivity. It describes the pulse-echo method for observing NMR. The article provides useful information on ferromagnetic nuclear resonance and nuclear quadrupole resonance, and illustrates the experimental arrangement of NMR with a block diagram. It also presents several application examples.

The purity of aluminum is generally characterized in one of two ways, by terminology or by the Aluminum Association designation system. This article reviews the properties of pure aluminum in purities from 99.99 percent through commercial purity, 99.00 percent. The mechanical properties of aluminum are discussed in terms of tensile properties, stress-strain relationships, and creep. The article also reviews the physical properties of aluminum, such as atomic structure and nuclear properties, atomic spectrum, crystal structure, density, thermal expansion, and thermal conductivity. It discusses the chemical properties of aluminum and presents a summary tabulation of the mechanical strength, ductility, and hardness of pure aluminum.

This article focuses on the temperature requirements of typical nonferrous metals and their alloys of commercial importance. These include aluminum, copper, magnesium, and titanium. The article describes the thermoelectricity, photoelectricity, and capacity of aluminum alloys. In addition, it provides information on the electrical properties of copper and its alloys. The article also lists typical physical and mechanical properties of aluminum alloys at ambient temperature.

Electromagnetic problem solutions are based on the macroscopic theory of the continuous model for the electromagnetic field (EMF). It is described by a system of integral or partial differential equations for five vector quantities, namely, electric field strength, electric flux density, current density, magnetic field strength, and magnetic flux density. This article describes the behavior of the EMF by Maxwell's equations in integral or differential forms. It discusses the definition of potentials; methods of mathematical modeling; boundary conditions; and energy, power density, and electromagnetic forces.

This article describes the chemical composition, physical properties, thermal properties, mechanical properties, electrical properties, optical properties, magnetic properties, and chemical properties of glasses, glass-matrix composites, and glass-ceramics.

Grain boundaries are interfaces between crystallites of the same phase but different crystallographic orientation. They can be characterized as being low angle or high angle. This article discusses the measurements of grain-boundary energy with a brief summary of different schemes for measuring grain-boundary surface tension. The atomistic simulations of grain-boundary energy, measurement of grain-boundary migration and the techniques used to monitor grain-boundary migration are reviewed. Several considerations and effects influencing the computation of grain-boundary mobility are also discussed.

This article discusses the key factors that influence the selection of engineered materials for a particular application. Materials properties such as ultimate tensile strength, yield strength, hardness, and ductility, which chiefly define the performance or functional characteristics, are covered. This is followed by manufacturing process considerations such as material factors, shape factors, process factors, and the characteristics of fabricability, namely formability, workability, castability, machinability, and weldability.

Addition of beryllium, up to about 2 wt″, produces dramatic effects in copper, nickel, aluminum, magnesium, gold, zinc, and other base metal alloys. This article provides information on the chemical composition, microstructure, heat treatment, fabrication characteristics, production steps and physical metallurgy of beryllium-copper, beryllium-nickel, and beryllium-aluminum alloy, and tabulates their mechanical, electrical and physical properties, and temper designations. It describes the important features of this alloy group, including information on safe handling. Additionally, the article presents examples of the beneficial properties of beryllium-copper alloys and quantifies some of the major reasons for their selection for particular applications.

The potential for introducing defects during processing becomes greater as the relative density of pressed and sintered powder metallurgy (PM) parts increases and more multilevel parts with complex geometric shapes are produced. This article discusses the potential defects in pressed and sintered PM parts: density variations, compaction and ejection cracks, microlaminations, poor degree of sintering, and voids from prior lubricant agglomerates. It describes the various methods applicable to green compacts: direct-current resistivity testing, radiographic techniques, computed tomography, and gamma-ray density determination. The article also discusses the methods for automated nondestructive testing of pressed and sintered PM parts: acoustic methods-resonance testing, eddy current testing, magnetic bridge comparator testing, ultrasonic techniques, radiographic techniques, gamma-ray density determination, and visual inspection.

This article reviews network models and their applications for the simulation of various physical phenomena related to grain-boundary migration. It discusses the steps involved in the implementation of two and three-dimensional network models, namely, acquisition and discretization of the microstructure, formulation of the equation of motion, and implementation of the topological transformations. The article presents examples that illustrate the simulation of physical phenomena to demonstrate the predictive power and flexibility of network models.

This article reviews the generator industry experience with stress-corrosion cracking of 18Mn-5Cr alloy retaining rings. It provides a description of corrosion of magnetic retaining rings. The article also discusses the primary repair alternatives to address crevice-corrosion cracking in water-cooled generators.

This article focuses on the various types of corrosion-related failure mechanisms and their effects on passive electrical components. The types include halide-induced corrosion, organic-acid-induced corrosion, electrochemical metal migration, silver tarnish, fretting, and metal whiskers. The passive electrical components include resistors, capacitors, wound components, sensors, transducers, relays, switches, connectors, printed circuit boards, and hardware.