Search Results for ironing

This article is an atlas of fractographs that helps in understanding the causes and mechanisms of fracture of pearlitic malleable and ferritic malleable white irons, and in identifying and interpreting the morphology of fracture surfaces. The fractographs illustrate the fracture sequence, localized plastic deformation, and microcrack initiation and propagation of these irons.

This article presents a discussion on the melting, pouring, and shakeout practices; composition control; molds, patterns, and casting design; heat treatment; and applications of different classes of nickel-chromium white irons and high-chromium white irons.

ASTM specification A 48 classifies gray irons in terms of tensile strength. The usual microstructure of gray iron is a matrix of pearlite with graphite flakes dispersed throughout. Section sensitivity effects are used in the form of a wedge test in production control to judge the suitability of an iron for pouring a particular casting. Mechanical property values obtained from test bars are sometimes the only available guides to the mechanical properties of the metal in production castings. Gray iron castings are used widely in pressure applications such as cylinder blocks, manifolds, pipe and pipe fittings, compressors, and pumps. Where high impact resistance is needed, gray iron is not recommended. The machinability of most gray cast iron is superior to that of most other cast irons of equivalent hardness, as well as to that of virtually all steel. Gray iron is used widely for machine components that must resist wear.

Malleable iron possesses considerable ductility and toughness because of its combination of nodular graphite and a low-carbon metallic matrix. The desired formation of temper carbon in malleable irons has two basic requirements. First, graphite should not form during the solidification of the white cast iron, and second, graphite must also be readily formed during the annealing heat treatment. These two metallurgical requirements influence the useful compositions of malleable irons and the melting, solidification, and annealing procedures. There are two basic types of malleable iron: blackheart and whiteheart. This article considers only the blackheart type and describes the metallurgical factors of malleable iron. It discusses the mechanical properties of pearlitic and martensitic malleable irons. The article provides additional information on the properties and heat treatment of ferritic, pearlitic, and martensitic malleable irons. The article lists some of the typical applications of malleable iron castings.

This article discusses the compositions, properties, and typical applications for ductile irons that are defined by U.S. and international standards . It describes the various methods used to test and inspect the metallurgical control processes in ductile iron production. The article discusses the effect of composition, graphite shape, and section size on the properties of ductile iron. The article also describes the mechanical properties of ductile iron at elevated temperatures. The heat treatment of ductile iron castings produces a significant difference in mechanical properties from as-cast ductile iron. A ductile iron generally has higher hardenability than a eutectoid steel with comparable alloy content. The article also discusses the physical properties of ductile iron, including density, thermal conductivity, electrical conductivity, electrical resistivity, and magnetic properties. Ductile iron has been chosen in many instances on the basis of significantly lower machining costs, which resulted in lower overall cost of the part.

Iron has been electroplated from a variety of electrolytes, whose bath parameters result in coatings that have widely divergent characteristics according to the specific characteristics desired in the finished product. This article provides an overview of the process description and processing equipment and discusses the properties, advantages, limitations, and principal applications of iron plating. It also describes the environmental, health, and safety considerations of iron plating.

Malleable iron is a type of cast iron that has most of its carbon in the form of irregularly shaped graphite nodules. This article tabulates the typical composition of malleable iron and specifications, and applications of malleable iron castings. It discusses the metallurgical control of malleable irons with emphasis on its composition and heat treatment. The article provides information on the specifications and mechanical properties of different types of malleable irons, such as ferritic, pearlitic, and martensitic malleable irons.

This article provides information on soldering iron and the most common soldering iron tip. It describes the classifications of hand soldering equipment based on its temperature control method. These are constant-voltage, variable temperature, and tip-temperature-controlled soldering irons. The article also reviews the selection criteria of the soldering iron.

This article provides information on the classification, microstructure, castability and section sensitivity of gray iron. It describes properties of the test bar and provides a short note on fatigue limit in reversed bending. Although the ASTM size B test bar is the bar most commonly used for all gray irons from classes 20 to 60, ASTM A 48 provides a series of bar sizes, and the user can select the bar sizes that best approximates the cooling rate in the critical section of the casting.

This article provides information on the general characteristics, composition, uses, applications and specifications for standard grades of ductile iron. It describes the manufacturing and metallurgical process control procedures, including testing and inspection, and heat treatment. The article also talks about the effects of composition, graphite shape, and section size on the mechanical properties of ductile iron. Tables and graphs provide helpful information on the tensile properties, compressive properties, torsional properties, damping capacity, impact properties, fracture toughness, fatigue strength, and elevated-temperature properties of ductile iron.

This article presents fractographs of pure irons that show evidence of overload, fatigue, and embrittlement. Woody fracture, microvoid coalescence, cleavage, and stress rupture are seen in the overload failure images. A large inclusion is seen in the fatigue fractograph. Embrittlement images show an impact fracture with intergranular rupture and transcrystalline cleavage.

Interplays of metallurgical factors, such as dissolved oxygen, carbon, and silicon content, that control the molten metal from melting to pouring, have a decisive influence on the quality of the castings. This article focuses on the magnesium treatment and desulfurization carried out during inoculation and nucleation of molten cast iron, assisting in the formation of cast iron. The different types of cast irons are gray cast iron, nodular cast iron, compacted graphite iron, malleable cast iron, and alloyed cast iron. The article provides an overview of the melt treatment processes carried out in cast steel, wrought and cast aluminum, and copper materials.