Search Results for iron plating equipment

Iron has been electroplated from a variety of electrolytes, whose bath parameters result in coatings that have widely divergent characteristics according to the specific characteristics desired in the finished product. This article provides an overview of the process description and processing equipment and discusses the properties, advantages, limitations, and principal applications of iron plating. It also describes the environmental, health, and safety considerations of iron plating.

Electrodeposits of cadmium are used to protect steel and cast iron against corrosion. This article provides an overview of the surface preparation of, and brighteners used in, cyanide baths. It focuses on the anode system, current density, deposition rates, and bath temperature of cadmium plating with attention to the materials of construction and equipment used. The article provides a description of the selection of plating method with examples, applications, and several postplating processes of cadmium plating.

This article provides information on soldering iron and the most common soldering iron tip. It describes the classifications of hand soldering equipment based on its temperature control method. These are constant-voltage, variable temperature, and tip-temperature-controlled soldering irons. The article also reviews the selection criteria of the soldering iron.

Ferrous metals are metals that contain primarily iron and may have small amounts of other elements added to give the desired properties. This article discuses the characteristics of steel products used in most industries, including construction, automotive, energy, shipping, and agriculture. These products include bars, rods, wires, hot and cold rolled sheets, strip plates, tin mill products, steel tubes, castings, and forgings. The article also provides information on the methods used to prevent or control the rusting of ferrous materials, namely, alloying, coating, and covering.

Selective plating, also known as brush plating, differs from traditional tank or bath plating in that the workpiece is not immersed in a plating solution (electrolyte). Instead, the electrolyte is brought to the part and applied by a handheld anode or stylus, which incorporates an absorbent wrapping for applying the solution to the workpiece (cathode). This article focuses on the selective plating systems that include a power pack, plating tools, anode covers, specially formulated plating solutions, and any auxiliary equipment required for the particular application. It provides a detailed account of the applications of selective plating, with examples. The article describes the advantages, limitations, key process elements, and health and safety considerations of selective plating. It also includes the most important industrial, government, and military specifications.

This article provides a brief review of the classification and characteristics of cast irons. It describes the processes used to clean iron castings, including mechanical cleaning and finishing and nonmechanical cleaning. The article discusses surface treatments used to extend casting life when resistance to corrosion, wear, and erosion is required. The common methods include electroplating, electroless plating, hardfacing, weld cladding, surface hardening, porcelain enameling, and organic coatings.

Shot peening is a method of cold working in which compressive stresses are induced in the exposed surface layers of metallic parts by the impingement of a stream of shot, directed at the metal surface at high velocity under controlled conditions. This article focuses on the major variables, applications, and limitations of shot peening and provides information on peening action, surface coverage, and peening intensity. It discusses the equipment used for shot recycling and shot propelling as well as the types and sizes of media used for peening. The article describes the problems in shot peening of production parts. It concludes with information on the SAE standard J442 that describes the test strips, strip holder, and gage used in measuring shot peening intensity.

This article discusses the types of patterns used for a specific application such as loose patterns, match plate patterns, cope and drag patterns, and special patterns. It describes the principles of the patternmaking techniques used to make expendable molds and for metal casting processes such as die casting and permanent mold casting. The article reviews the pattern features and mold production considerations used in the pattern design, namely, parting line considerations, addition of gates and risers, core prints, and locating points. It examines the pattern allowances for ensuring a dimensionally correct final pattern. A variety of materials and advanced composite materials used in the manufacture of patterns are discussed. The article evaluates the factors influencing the selection of type of patterns for specific castings.

Copper can be electrodeposited from numerous electrolytes. Cyanide and pyrophosphate alkalines, along with sulfate and fluoborate acid baths, are the primary electrolytes used in copper plating. This article provides information on the chemical composition, plating baths, and operating conditions of electrodeposition processes for chromium plating, nickel plating, iron plating, cadmium plating, zinc plating, indium plating, lead plating, tin plating, silver plating, gold plating, brass plating, bronze plating, tin-lead plating, zinc-iron plating, and zinc-nickel plating. The article also discusses selective plating, electroforming, and other processes and where they are typically used.

Coating of cast irons is done to improve appearance and resistance to degradation due to corrosion, erosion, and wear. This article describes inorganic coating methods commonly applied to cast irons. The coating methods include plating, hot dip coating, conversion coating, diffusion coating, cladding, porcelain enameling, and thermal spray. Organic coatings have a wide variety of properties, but their primary use is for corrosion resistance combined with a pleasing colored appearance. The article discusses the various types of organic coatings applied to cast irons. Practically any degree of smoothness or roughness and requirement for color and gloss can be filled by organic coatings. The article describes abrasive blast cleaning, abrasive waterjet cleaning and finishing, vibratory finishing, barrel finishing, and shot peening for processing iron castings.

Pumps and compressors are representative fluid machineries, which are indispensably important industrial equipment for water supply systems, chemical processing and reactions, and fluid power systems. This article addresses friction, lubrication, and wear of components in several types of machines such as positive displacement pumps including hydraulic pumps, turbo-pumps including centrifugal pumps, vacuum pumps, and compressors including the positive displacement type and turbo type.

This article explains the applications of continuous electroplated steel. For each category of application, the type of coating needed and the key attributes of the coating are discussed. The bulk of the article describes electrodeposition technology, including plating line components and process classification.

Thermal spray is an important surface-modification process implemented by the steel industry. This article reviews thermal spray materials and equipment used and also provides examples of where typical coated components result in improved performance. It contains a table that lists thermal spray applications in the iron-steel manufacturing industry.

This article focuses on the mineral and organic acid cleaning of iron and steel. It begins with a discussion on the application methods, process selection criteria, solution composition, equipment used, and control of process variables in mineral acid cleaning. The article then describes the advantages and disadvantages of organic acid cleaning. Applications, including boiler cleaning, stainless steel cleaning, and removal of iron- and copper-bearing deposits, are discussed. The article concludes with an overview of acid cleaning of nonferrous alloys.

A significant amount of the worldwide demand for metals is met with recycled materials acquired by metal producers in the form of purchased scrap. This article focuses primarily on the methods and technology used to process and repurpose the vast amounts of purchased scrap that recirculate in the industrial supply chain. It describes the U.S. market for iron and steel scrap, providing information on scrap use by industry, factors influencing demand, and the purchased scrap supply. Iron and steel recycling is discussed separately from stainless steel and superalloy recycling in this article, as the scrap industry treats them differently. The scrap processing of iron involves collection, separation and sorting, size reduction and compaction, detinning, blending, and incineration. The recycling of stainless steels and superalloys follows the same process, but requires several additional steps, including secondary nickel refining, degreasing, and separation of metallurgical wastes.

Oxyfuel gas cutting (OFC) includes a group of cutting processes that use controlled chemical reactions to remove preheated metal by rapid oxidation in a stream of pure oxygen. This article discusses the operation principles and process capabilities of the OFC. It reviews the properties and compositions of fuel types such as acetylene, natural gas, propane, propylene, and methyl-acetylene-propadiene-stabilized gas. The article describes the effects of OFC on base metal, including carbon and low-alloy steels, cast irons, and stainless steels. It provides information on light cutting, medium cutting, heavy cutting, and stack cutting. The article informs that the basic oxyfuel method can be modified to allow gas cutting of metals, such as stainless steel and most nonferrous alloys, that resist continuous oxidation.

The recreation industry covers a huge number of sports, games, and activities that take place in environments as diverse as the activities themselves. This article addresses the corrosive attack on recreational equipment, such as recreational boats, firearms, bicycles, playground equipment, and climbing gear. It discusses the procedures for base materials selection, surface treatments and coatings, and good practice of maintenance to mitigate corrosion while addressing other functional issues for a given piece of equipment.

Finishing refers to a wide variety of processes that generally involve material removal in one form or another to generate surfaces with specific geometries, tolerances, and functional or decorative characteristics. This article discusses four major finishing methods, namely, abrasive machining, electropolishing, mass finishing, and shot peening. In each case, it describes subtypes, process variations, and the associated equipment.

Mechanical cleaning systems are used to remove contaminants of work surface by propelling abrasive materials through any of these three principal methods: airless centrifugal blast blade- or vane-type wheels; compressed air, direct-pressure dry blast nozzle systems; or compressed-air, indirect-suction (induction) wet or dry blast nozzle systems. This article focuses on the abrasive media, equipment, applications, and limitations of dry and wet blast cleaning. It discusses the health and safety precautions to be taken during mechanical cleaning.

The high-temperature corrosion processes that are most frequently responsible for the degradation of furnace accessories are oxidation, carburization, decarburization, sulfidation, molten-salt corrosion, and molten-metal corrosion. This article discusses each corrosion process, along with the corrosion behavior of important engineering alloys. It describes the corrosion of plating, anodizing, and parts of pickling equipment such as tanks, wirings and bus bars, racks, anode splines, pumps, and heaters.