Search Results for inorganic compounds

This article reviews the basic types of mold aggregates and bonding methods for expendable molds and coremaking. It provides an overview of mold media and the basic types of sands and their properties. The most significant clays used in green sand operations, such as bentonites, are discussed. The article describes the methods of sand bonding with inorganic compounds. It provides a description of resin-bonded sand systems: no-bake binder systems, heat-cured binder systems, and cold box binder systems. The article concludes with a discussion on the media used for expendable molds, namely, ceramic shells and rammed graphite, for casting reactive metals such as titanium or zirconium.

Ion-beam-assisted deposition (IBAD) refers to the process wherein evaporated atoms produced by physical vapor deposition are simultaneously struck by an independently generated flux of ions. This article discusses the energy utilization of this process. It describes the physical and chemical processes occurring at the film-vacuum interface during IBAD and dual-ion-beam sputtering with illustrations. The article also reviews the methods used for large-area, high-volume implementation of IBAD and the modes of film formation for IBAD. It contains a table that presents information on deposition and synthesis of inorganic compounds by IBAD and concludes with a discussion on the improved coating properties, advantages, limitations, and applications of IBAD.

This article briefly describes the capabilities of gas chromatography/mass spectrometry, which is used to qualitatively and quantitatively determine organic (and some inorganic) compound purity and stability and to identify components in a mixture. The discussion covers in more detail gas chromatography/mass spectrometry (GC/MS) instrumentation, interpreting mass spectra, GC/MS methodology, and GC/MS advances. Sample preparation, which is very important in GC/MS to avoid erroneous data and to minimize maintenance and troubleshooting of the instrument, is also discussed. Further, the article highlights the state of the art in the MS detector technology.

Germanium is a semiconducting metalloid element found in Group IV A. Germanium is used in the field of electronics, infrared optics, and in the fields of gamma ray spectroscopy, catalysis, and fiber optics. This article discusses the sources, manufacturing, and processing of germanium, and focuses on the chemical properties of various germanium compounds, including germanium halides, germanates, germanides, germanes, inorganic, and organogermanium compounds. It also tabulates the physical, thermal, electronic, and optical properties of germanium, and explains the economical aspects and specifications of germanium. The article describes the analytical and test methods of germanium, including gravimetric method, titrimetric method, and spectral method. It provides a short note on toxicology, and concludes with the uses of germanium in different fields.

This article reviews the fundamental relationships between microstructure and mechanical properties for major classes of nonmetallic engineering materials: metals, ceramics and glasses, intermetallic compounds, polymers, and composites. It details the structures of inorganic crystalline solids, inorganic noncrystalline solids, and polymers. The article describes the various strengthening mechanisms of crystalline solids, namely, work hardening, solid-solution hardening, particle/precipitation hardening, and grain size hardening. Deformation and strengthening of composite materials, polymers, and glasses are reviewed. The article concludes with information on the two important aspects of the mechanical behavior of any class of engineering material: fatigue response and fracture resistance.

X-ray diffraction (XRD) is the most extensively used method for identifying and characterizing various aspects of metals related to the arrangements and spacings of their atoms for bulk structural analysis. XRD techniques are also applicable to ceramics, geologic materials, and most inorganic chemical compounds. This article describes the operating principles and types of XRD analyses, along with information about the threshold sensitivity and precision, limitations, sample requirements, and capabilities of related techniques. The necessary instrumentation for XRD analyses include the Debye-Scherrer camera and the X-ray diffractometer. The article also describes the uses of XRD analyses, such as the identification of phases or compounds in metals and ceramics; detection of order and disorder transformation; determination of lattice parameters and changes in lattice parameters due to alloying and temperature effects; measurement of residual stresses; characterization of crystallite size and perfection; characterization of preferred orientations; and determination of single crystal orientations.

This article provides an introduction to the molecular fluorescence spectroscopy, and discusses the theory of fluorescence and its application to chemical analysis. It provides information on fluorescence that occurs in organic compounds and inorganic atoms and molecules. The article describes the instruments used in the spectroscopy, namely, radiation sources, sample holders, wavelength selectors, detectors, computers, and ratiometric instruments. The practical considerations include solvent effects, corrected spectra, wavelength calibration, temperature, and scattered light. The article also discusses the uses of some special techniques used in molecular fluorescence spectroscopy.

X-ray diffraction techniques are useful for characterizing crystalline materials, such as metals, intermetallics, ceramics, minerals, polymers, plastics, and other inorganic or organic compounds. This article discusses the theory of x-rays and how they are generated and detected. It also describes the crystalline nature of certain materials and how the geometry of a unit cell, and hence crystal lattice, affects the direction and intensity of diffracted x-ray beams. The article concludes with several application examples involving measurements on single and polycrystalline materials.

A coating can be defined as a substance spread over a surface to provide protection or to serve decorative purposes. This article discusses two industrial coating components, namely, nonvolatile components such as the resin or binder, pigments, and any additives that may be incorporated into the formulation; and volatile components such as solvents, or water in emulsions and their composition. It provides general information on volatile organic compounds. The article describes the film-forming mechanisms of various coating types, namely, lacquers, chemically converting coatings, latex coatings, alkyds and other resins, which cure by oxidation, moisture-curing polyurethanes and inorganic zinc primers, and powder coatings. The article concludes with a discussion on the functions of the primer, intermediate coat, and topcoat in coating systems.

Physical vapor deposition (PVD) coatings are harder than any metal and are used in applications that cannot tolerate even microscopic wear losses. This article describes the three most common PVD processes: thermal evaporation, sputtering, and ion plating. It also discusses ion implantation in the context of research and development applications.

Alkaline cleaning is a commonly used method for removing a wide variety of soils from the surface of metals. This article focuses on the composition, operating conditions, and test and control of alkaline cleaners, as well as equipment used and their application methods. It describes the mechanisms of alkaline cleaning, such as saponification, displacement, emulsification and dispersion, and metal oxide dissolution. The article concludes with information of the safety and environmental considerations in the usage of alkaline cleaners.

Metal contamination of the environment reflects both natural sources and industrial activity, affecting human health. This article begins with a discussion on the level of metal exposure resulting in toxicological effects, the factors influencing toxicity of metals, and carcinogenicity of metal compounds. It discusses some commonly used chelating agents for treating metal intoxication, and clinical effectiveness in treating poisoning by different metals. The metals discussed are grouped into four categories: (1) major toxic metals with multiple effects, including arsenic, beryllium, cadmium, chromium, lead, mercury, and nickel; (2) essential metals with potential for toxicity, including cobalt, copper, iron, manganese, molybdenum, selenium, and zinc; (3) metals with toxicity related to medical therapy, including aluminum, bismuth, gallium, gold, lithium, and platinum; and (4) minor toxic metals, including antimony, barium, indium, magnesium, silver, tellurium, thallium, tin, titanium, uranium, and vanadium. The main factors included in the discussion are their disposition, toxicity, biological factors and treatment.

This article describes the characteristics of zinc-rich coatings that can be subcategorized according to the type of binder material used. It discusses the formulations of zinc-rich coatings with organic binders. The three major groups of inorganic zinc-rich coatings categorized by the Society for Protective Coatings are also discussed. These include postcured water-based alkali metal silicates, self-cured water-based alkali metal silicates, and self-cured solvent-based alkyl silicates. The article concludes with information on comparisons of inorganic with organic zinc-rich coatings.

Additives for plastics and elastomers are used to increase the ease of processing and to improve the properties of the final product. Additives improve processing characteristics by increasing lubricity and by stabilizing the polymer. Additives that improve properties include those that decrease static charge development and microbial activity and those that improve flame retardation characteristics, color, light stability, impact resistance, density and mechanical properties. This article focuses on the additives for polymers and elastomers that are used for improving processing--blowing agents, mold-release agents, lubricants, plasticizers, and heat stabilizers--and for improving properties antimicrobials, antioxidants, antistatic agents, colorants, fillers and fiber reinforcements, flame retardants, impact modifiers, light stabilizers, plasticizers, and heat stabilizers. Furthermore, it discusses the method for addition of these additives and the problems faced during compounding.

This article introduces the fundamental concepts and the essential components of liquid chromatography (LC). It discusses the different modes of LC, such as liquid-solid chromatography, liquid-liquid chromatography, bonded-phase chromatograph, normal-phase chromatography, reversed-phase chromatography, ion-exchange chromatography, ion-pair chromatography, and size-exclusion chromatography. The article also includes a discussion on the qualitative and quantitative analyses and the applications of LC.

Organic coatings are the principal means of corrosion control for the hulls and topsides of ships and for the splash zones on permanent offshore structures. This article describes surface preparation which is the most important consideration in determining the performance of organic coating systems. It contains a table that lists the uses and applicable standards for various surface preparation techniques. The article provides information on organic coatings in topside coating systems and reviews the importance of primers in the protection of steel substrates. It also explains the property requirements and the common types of immersion coatings.

This article presents an overview of resistance brazing (RB) used for many applications involving small workpieces, for small joints that are part of very large equipment, or for low-volume production runs. It lists the advantages and limitations of RB and outlines the factors that contribute to high quality in an RB joint. The article discusses the classification of RB such as manual RB or automatic RB. It describes the selection of metal electrodes and filler metals for RB. The filler metals include silver alloys, aluminum-silicon alloys, and copper-phosphorus alloys.