Alloys 242.0 and A242.0 are age-hardenable casting alloys with excellent strength at elevated temperatures. This datasheet provides information on key alloy metallurgy, processing effects on physical and mechanical properties, fabrication characteristics, and application characteristics of these 2xxx series alloys.

This datasheet provides information on composition limits, key metallurgy, fabrication characteristics, processing effects on physical, tensile, and creep-rupture properties, and applications of Al-Cu-Mg-Ni alloys 2618 and 2618A. The influence of prolonged holding at elevated temperature on tensile properties and the influence of temperature on compressive yield strength of alloy 2618-T61 hand-forged billets are illustrated.

Alloy 2219 is typically used in elevated temperature applications and for welded structures where post-weld heat treatment can be used. This datasheet provides information on key alloy metallurgy, processing effects on physical and tensile properties, fabrication characteristics, and applications of this 2xxx series alloy.

Alloy 2040 is a forging alloy with a significant improvement in elevated temperature properties over alloys 2014 and 2219. This datasheet provides information on composition limits of 2040 and provides a comparison of design mechanical properties of 2040 and 2014.

Metallic matrices are essential constituents for the fabrication of metal-matrix composites (MMCs). This article describes three different classes of aluminum alloys, namely, commercial aluminum alloys, low-density and high-modulus alloys, and high temperature alloys. It presents typical tensile properties and fracture toughness of the selected heat treatable aluminum alloys in a table. Titanium alloys are very attractive for MMC applications, due to their higher strength and temperature capability compared to aluminum alloys. The article tabulates the effect of heat treatment on room-temperature properties and tensile properties of Ti-25Al-17Nb alloy sheet.

Cobalt finds its use in various applications owing to its magnetic properties, corrosion resistance, wear resistance, and its strength at elevated temperatures. This article discusses the mining and processing of cobalt and cobalt alloys. It describes the types of cobalt alloys, including wear-resistant alloys, high-temperature alloys, corrosion-resistant alloys, and special-purpose alloys. The article provides data on the chemical composition, mechanical properties, and physical properties of these alloys. Further, it provides information on the uses of cobalt in superalloys, cemented carbides, magnetic materials, low-expansion alloys, and high-speed tool steels.

This article addresses the general welding characteristics common to both solid-solution-strengthened and precipitation-hardened nickel-, iron-, and cobalt alloys.

This article provides a general overview of physical and mechanical properties, alloy compositions, applications, and product forms of cobalt-base alloys as wear-resistant, corrosion-resistant, and/or heat-resistant materials. The discussion is largely focused on cobalt-base alloys for wear resistance, as this is the single largest application area of cobalt-base alloys.

Both surface finish and surface integrity must be defined, measured, and maintained within specified limits in the processing of any product. Surface texture is defined in terms of roughness, waviness, lay, and flaws. This article illustrates some of the designations of surface roughness and the symbols for defining lay and its direction. In addition, it describes the applications of surface integrity, typical surface integrity problems created in metal removal operations, and principal causes of surface alterations produced by machining processes. The article tabulates the effect of some machining methods on fatigue strength, and low-stress grinding procedures for steels, nickel-base high-temperature alloys, and titanium alloys.

Structural alloys are commonly subjected to a variety of thermal and thermomechanical loads. This article provides an overview of the experimental methods in thermal fatigue (TF) and thermomechanical fatigue (TMF) and presents experimental results on the structural materials that have been considered in TF and TMF research. Life prediction models and constitutive equations suited for TF and TMF are covered. The structural materials discussed include carbon steels, low-alloy steels, stainless steels, aluminum alloys, and nickel-base high-temperature alloys. The article explains crack initiation and crack propagation in TF and TMF. It describes thermal ratcheting and thermal shock behavior of structural metallic materials. The article concludes with information on life prediction of structural materials under TF and TMF.

This article provides an overview of the types of postweld heat treatment processes carried out in solid-solution-strengthened and precipitation-strengthened nonferrous high-temperature nickel and cobalt alloys.

Macroetching is a procedure for revealing the large-scale structure of a metallic specimen, that is, the structure visible with the unaided eye, by etching an appropriately prepared surface. This article provides information on the basic procedures for macroetching as well as the apparatus used. It discusses selected etchants for efficient macroetching of various metals and their alloys, including iron, steel, high-alloy steels, stainless steels, high-temperature alloys, titanium, titanium alloys, aluminum, aluminum alloys, copper, and copper alloys. The article also describes various conditions that are revealed by the macroetching of aluminum.

The measurement of thermophysical properties of metal alloys, especially at high temperatures, is difficult because of the reactivity of some alloys. This article reviews the methods available for measurement of thermal and other physical properties for liquid, semi-solid, and solid commercial alloys, including adiabatic calorimetry, modulated calorimetry, Calvet calorimetry, single-pan calorimetry, and drop calorimetry. It describes differential scanning calorimetry and differential temperature analysis for measuring transition temperatures such as phase transformation or glass transition temperatures. The article schematically illustrates the laser flash apparatus for measuring the thermal diffusivity of solids and oscillation viscometer for measurements of the viscosity of metals. A summary of the measurement methods is presented in tables.