This article describes high-performance liquid chromatography and ultra-high-performance liquid chromatography that are used to separate and quantify the chemical components in any sample that can be dissolved in a liquid. This includes pharmaceutical drugs, medicinal plant extracts, food constituents, flavors, fragrances, industrial chemicals, pesticides, and pollutants. Readers are introduced to the most commonly employed mode, reverse-phase chromatography, with examples and an exclusive focus on commercially available instruments and consumables. The discussion covers the various processes involved in liquid chromatography, including assessing a separation of sample components, adjusting the mobile phase, choosing the stationary phase, optimizing a separation, preparing real samples, and analyzing complex samples.

Gas chromatography/mass spectrometry (GC/MS) is useful in analyzing mixtures of organic compounds. This article commences with a description of the principles of mass spectrometry and gas chromatography. It provides information on the procedures of mass spectrum interpretation, and describes the experimental procedure of and sample preparation for GC/MS. The article also discusses complementary techniques, such as high-performance liquid chromatography/mass spectrometry and mass spectrometry/mass spectrometry, and concludes with the applications of GC/MS.

This article focuses on epoxy because this resin category has widespread use and because it is tested using quality control measures typical of most resin systems. It explains that a typical resin system will consist of one or more epoxy resins, a curing agent, and a catalyst to control the rate of reaction. The article describes the component material tests, mixed resin system tests, and prepreg tests for the resin system. These tests include high-performance liquid chromatography, infrared spectroscopy, and gel permeation chromatography. The article contains a table that lists typical resin and prepreg property tests.

This article introduces the fundamental concepts and the essential components of liquid chromatography (LC). It discusses the different modes of LC, such as liquid-solid chromatography, liquid-liquid chromatography, bonded-phase chromatograph, normal-phase chromatography, reversed-phase chromatography, ion-exchange chromatography, ion-pair chromatography, and size-exclusion chromatography. The article also includes a discussion on the qualitative and quantitative analyses and the applications of LC.

This article provides an overview of common analytical tools used as part of the process of providing practical information regarding the causes of a coating problem or failure. The common analytical tools include Fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy-energy dispersive X-ray spectroscopy, chromatography, and electrochemical impedance spectroscopy. Test cabinets and standard test environments for laboratory analysis are reviewed. The article describes non-standard simulation testing and case studies of simulated environments for coating failure analysis.

This article is a compilation of abbreviations of terms, techniques, standards, compounds, and properties of materials that are relevant to the characterization and failure analysis of plastics.

This article addresses some established protocols for characterizing thermoplastics and whether they are homogeneous resins, alloyed, or blended compositions or highly modified thermoplastic composites. It begins with a discussion on characterizing mechanical, rheological, and thermal properties of polymer. This is followed by a section describing molecular weight determination using viscosity measurements. Next, the article discusses the use of cone and plate and parallel plate geometries in melt rheology. It then reviews the processes involved in the analysis of thermoplastic resins by chromatography. Finally, the article covers three operations of thermoanalysis, namely differential scanning calorimetry, thermogravimetric analysis, and thermomechanical testing.

This article introduces various analytical techniques commonly used in the characterization of organic solids and liquids and discusses the challenges in performing the analysis, with examples. Some general advice in approaching a material analysis is also provided.

This article is dedicated to gas chromatography (GC), covering the chromatographic method and primary components of a modern GC apparatus. The components include the carrier gas cylinder, flow controller and pressure regulator, sample inlet and injection port, column oven, and detector. Common GC detectors are the thermal conductivity cell detector, flame ionization detector, electron capture detector, sulfur chemiluminescence detector, and nitrogen-phosphorus detector.

Ion chromatography (IC) is an analytical technique that uses columns packed with ion exchange resins to separate ions in aqueous solutions and dynamically elute them to a detector. This article provides information on the different modes of detection, namely, eluent-suppressed conductivity detection, single-column ion chromatography with conductivity detection, ion chromatography with spectrophotometric detection, and amperometric electrochemical detection. It describes the modes of separation techniques in IC and reversed-phase IC. The article discusses the detection capabilities of IC, the procedures for preparing solid and liquid samples, as well as the applications of IC.

This article presents a detailed account of ion chromatography (IC). It begins by describing the principles of common separation modes in IC. This is followed by a section on the different modes of detection, namely suppressed conductivity detection, nonsuppressed conductivity detection, spectrophotometric detection, and electrochemical detection. Various separation modes in IC are then described. The article further provides information on various eluents species, analyte range, and sample preparation techniques in IC. It ends by providing information on the instrumentation and applications and future directions of IC.

This article is a compilation of abbreviations, symbols, and tradenames for terms related to the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials.

This article discusses the major methods of elemental analysis, namely, the combustion method for carbon, hydrogen, and nitrogen; the Kjeldahl method for nitrogen; and the Schoniger flask method for other common elements. It also discusses the methods of functional group analysis for acids, alcohols, aldehydes and ketones, amines, esters, aromatic hydrocarbons, peroxides, phenols, water (Karl Fischer method), and alkenes.

This article describes the most significant tests to characterize the properties of constituent materials. It discusses the chemical, physical, and mechanical tests for determining the properties of reinforcement fibers and fabrics. The article provides information on some of the basic materials used for thermoset and thermoplastic resin matrices. It reviews the identification of the individual characteristics of thermoset and thermoplastic resin along with the test methods normally used for their determination. The article contains a table that lists properties and tests for uncured and cured thermoset-matrix resins and prepregs.

This article briefly discusses popular techniques for metals characterization. It begins with a description of the most common techniques for determining chemical composition of metals, namely X-ray fluorescence, optical emission spectroscopy, inductively coupled plasma optical emission spectroscopy, high-temperature combustion, and inert gas fusion. This is followed by a section on techniques for determining the atomic structure of crystals, namely X-ray diffraction, neutron diffraction, and electron diffraction. Types of electron microscopies most commonly used for microstructural analysis of metals, such as scanning electron microscopy, electron probe microanalysis, and transmission electron microscopy, are then reviewed. The article contains tables listing analytical methods used for characterization of metals and alloys and surface analysis techniques. It ends by discussing the objective of metallography.