This article provides a discussion on heat treating practices, namely, carburizing, normalizing, annealing, stress relieving, preheating, austenitizing, quenching, tempering, and nitriding for various grades of mold and corrosion-resistant tool steels. It details the characteristics of various grades of mold and corrosion-resistant tool steels, including type P20, type P20Mod, AISI type 420, and AISI type 440B.

This article focuses primarily on the various steps involved in the brazing of heat-resistant alloys (nickel- and cobalt-base alloys). The major steps include the selection of brazing filler metals, surface cleaning and preparation, brazing processes and their corresponding atmospheres, and fixturing. The article also provides an overview of the brazing of blow-alloy steels and tool steels and oxide dispersion-strengthened alloys.

Heat treating of stainless steel produces changes in physical condition, mechanical properties, and residual stress level and restores maximum corrosion resistance when that property has been adversely affected by previous fabrication or heating. This article focuses on annealing of different types of stainless steels such as austenitic, ferritic, duplex, martensitic, and precipitation-hardening, and on the heat treatment of superalloys and refractory metals. It discusses the recommended procedures for solution annealing, austenite conditioning, transformation cooling, and age tempering of precipitation-hardening stainless steels. The article also lists general recommendations for the annealing temperatures of tantalum, niobium, molybdenum, tungsten, and their alloys.

Although stainless steel is naturally passivated by exposure to air and other oxidizers, additional surface treatments are needed to prevent corrosion. Passivation, pickling, electropolishing, and mechanical cleaning are important surface treatments for the successful performance of stainless steel. This article describes the surface treatment of stainless steels including abrasive blast cleaning, acid pickling, salt bath descaling, passivation treatments, electropolishing, and the necessary coating processes involved. It also describes the surface treatment of heat-resistant alloys including metallic contaminant removal, tarnish removal, oxide and scale removal, finishing, and coating processes.

Cr-Mo steels are preferred in the construction of high-temperature components because they possess excellent strength, toughness, and corrosion resistance relative to carbon steels and most low-alloy steels. This article discusses the composition and metallurgy of the heat-resistant Cr-Mo steels. It details the Charpy V-notch (CVN) toughness properties of Cr-Mo steels relevant to fatigue and fracture resistance. The fracture mechanics of Cr-Mo steels are reviewed. The article analyzes the characterization of low-cycle fatigue based on fatigue damage calculations. It concludes with information on fatigue crack growth and fatigue behavior of weldments.

Characteristics of stainless steel that affect its formability include yield strength, tensile strength, and ductility, in addition to the effect of work hardening on these properties. This article discusses the forming process of stainless steel, heat-resistant alloys and refractory metals, detailing the major aspects of forming, including formability, lubrication, and forming methods and tools. The effect of factors such as alloy condition, cold reduction, forming direction (in the case of heat-resistant alloys) and temperature (in the case of refractory metals) on formability is also discussed.

Cast stainless steels are widely used for their corrosion resistance in aqueous media at or near room temperature and for service in hot gases and liquids at elevated temperatures. This article provides a comparison between cast and wrought stainless steels in terms of composition, microstructure and properties. It discusses the grade designations and compositions of cast stainless steels. The article describes the mechanical properties, applications, and corrosion characteristics of corrosion-resistant steel castings and heat-resistant steel castings.

This article discusses the mechanical properties of carbon steels, low-alloy steels, wear-resistant steels, corrosion-resistant steels, heat-resistant steels, and common alloys at both room and elevated temperature. It also provides information on the corrosion-resistant and heat-resistant applications of the common alloys.

This article presents a detailed account on the process flow, composition, alternative sources, and the advancement of ironmaking, steelmaking and secondary steelmaking practices. Some steels, such as bearing steels, heat-resistant steels, ultrahigh strength missile and aircraft steels, and rotor steels have higher quality requirements and tighter composition control than plain carbon or ordinary low-alloy steels. The production of special-quality steels requires vacuum-based induction or electric remelting and refining capabilities. The article explores the types and characteristics of various steel manufacturing processes, such as ingot casting, continuous casting, and hot rolling. It provides an outline of specialized processing routes of producing ultralow plain carbon steels, interstitial-free steels, high strength low-alloy steels, ultrahigh strength steels, stainless steels, and cold-rolled products, and briefly explains the analytical techniques for liquid steels.

The liquid nitriding process has several proprietary modifications and is applied to a wide variety of carbon steels, low-alloy steels, tool steels, stainless steels, and cast irons. This article discusses the applications, subclassifications, operating procedures, and maintenance procedures, as well as the equipment used (salt bath furnaces) and safety precautions to be undertaken during the liquid nitriding process. It describes the different types of liquid nitriding process, namely, liquid pressure nitriding, aerated bath nitriding, and liquid nitrocarburizing. Environmental considerations and the increased cost of detoxification of cyanide-containing effluents have led to the development of low-cyanide salt bath nitrocarburizing treatments. The article reviews the wear and antiscuffing characteristics of the compound zone produced in salt baths with the help of Falex scuff test.

This article reviews the properties of cast steels that are specified for liquid corrosion service at temperatures above and below 650 deg C. Stainless steel castings are usually classified based on their resistance to corrosion and heat and generally fall into one category or the other. The article describes alternate methods for classifying cast stainless steels, one is based on grade designations, the other on microstructural analysis. It also addresses heat treatment, pointing out its similarities with the thermal processing of wrought materials, and establishes the importance of mechanical properties in material selection. The article presents information on the selection process and provides a detailed list of heat-resistant cast steels and alloys. It also includes key manufacturing characteristics to aid in foundry and welding-related decisions.

This article describes the control of water chemistry in the steam cycle of a power plant for achieving corrosion control, deposition prevention, and higher cycle efficiency. It discusses the materials requirements of the components exposed to supercritical water in supercritical (SC) and ultrasupercritical (USC) power plants. These components include high-pressure steam piping and headers, superheater and reheater tubing, water wall tubing in the boiler, high-and intermediate-pressure rotors, rotating blades, and bolts in the turbine section. The article reviews the boiler alloys, used in SC and USC boilers, such as ferritic steels, austenitic steels, and nickel-base alloys. It provides information on the materials used in turbine applications such as ferritic rotor steels, turbine blade alloys, and bolting materials. The article explains various factors influencing steamside corrosion in SC power plants. It also deals with the role of overall efficiency in the USC power generation.

Stainless steels are widely used at elevated temperatures when carbon and low-alloy steels do not provide adequate corrosion resistance and/or sufficient strength at these temperatures. This article deals with the wrought stainless steels used for high temperature applications. It gives some typical compositions of wrought heat-resistant stainless steels, which are grouped into ferritic, martensitic, austenitic, and precipitation-hardening (PH) grades. Quenched and tempered martensitic stainless steels are essentially martensitic and harden when air cooled from the austenitizing temperature. These alloys offer good combinations of mechanical properties. The article focuses on mechanical property considerations and corrosion resistance considerations of stainless steels. The corrosion and oxidation resistance of wrought stainless steels is similar to that of cast stainless steels with comparable compositions.

This article provides information on the base material properties of wrought duplex stainless steels (DSS). These properties include microstructure, alloy grades, mechanical and physical properties, and corrosion resistance. The article reviews the applications and microstructural development of DSS. It describes the factors influencing welding and weldability of the DSS. These factors include preheating, postweld heat treatment, interpass temperature control, welding practices, welding procedure qualification, filler metal requirements, cracking behavior, and loss of properties. The article examines the applicable welding processes such as fusion welding and solid-state welding processes.

This article describes the applications, advantages, and disadvantages of three centrifugal casting processes as well as the equipment used. These processes are true centrifugal casting, semicentrifugal casting, and centrifuge mold casting. The article discusses the cooling, inoculation, fluxing, and extraction of castings. It reviews mold heating and coating techniques as well as the various molds used. The three most common defects observed in centrifugal castings are also discussed. The article concludes with information on the applications of centrifugal casting in investment casting and combustion synthesis as well as spin casting.

This article discusses the requirements that are typically considered in designing a steel casting. It describes the materials selection that forms a part of process of meeting the design criteria. The article provides information on the material selection guide for five major design applications. It examines the attributes that are specific to the manufacturing of steel castings. The article concludes with information on the various nondestructive examination methods available for ensuring manufacturing quality and part performance in steel castings.