Search Results for equipment tools

This article provides a detailed discussion on the heating equipment used for austenitizing, quenching, and tempering tool steels. These include salt bath furnaces, controlled atmosphere furnaces, fluidized-bed furnaces, and vacuum furnaces. The article discusses the types of nitriding and nitrocarburizing processes and the equipment required for heat treating tool steels to improve hardness, wear resistance, and thermal fatigue. The various nitriding and nitrocarburizing processes covered are salt bath nitrocarburizing, gas nitriding and nitrocarburizing, and plasma nitriding and nitrocarburizing.

This article describes the effect of temperature, composition, strain rate, and fabrication history on the results obtained in the forming of beryllium as well as the safety measures required. It provides information on the equipment, tooling, dies, and workpieces used for forming beryllium. The article discusses the role of lubrication, blank development, tool designs, and strain rates, in deep drawing. It also provides information on the tooling and applications of three-roll bending, stretch forming, and spinning.

The central approach of human factors engineering is the systemic application of relevant information about human characteristics and behavior to the design of human-made objects, facilities, and environments that people use. This article focuses on the elements that are considered for an acceptable level of human performance. These include the state or condition of the human being; the activity, including equipment and required tools; and the context in which the activity is performed.

Contour roll forming is a continuous process for forming metal from sheet, strip, or coiled stock into desired shapes of uniform cross section by feeding the stock through a series of roll stations equipped with contoured rolls. This article discusses the materials, roll-forming machines, tooling, and auxiliary equipment used in contour roll forming and its process variables. Tooling used in roll forming includes forming rolls and dies for punching and cutting off the material. The article discusses the additional tooling required in tube mills to weld, size, and straighten the tubes as they are produced on the machine. It describes the roll design for tube rolling and reviews the seam welding operations of pipe and tubing. The article discusses cross-sectional tolerances, the reshaping of round tubing, and factors that affect the quality, accuracy, and surface finish.

This article discusses the general formability considerations of aluminum alloys. To conduct a complete analysis of a formed part, the required mechanical properties, as determined by several standard tests, must be considered. The article describes tension testing and other tests designed to simulate various production forming processes, including cup tests and bend tests, which help in determining these properties. It provides information on the equipment and tools, which are used in the forming of aluminum alloys. The article presents a list of lubricants that are most widely used in the forming. It also analyzes the various forming processes of aluminum alloys. The processes include blanking and piercing, bending, press-brake forming, contour roll forming, deep drawing, spinning, stretch forming, rubber-pad forming, warm forming, superplastic forming, explosive forming, electrohydraulic forming, electromagnetic forming, hydraulic forming, shot peening, and drop hammer forming.

Turning is a machining process for generating external surfaces of revolution by the action of a cutting tool on a rotating workpiece, usually in a lathe. This article discusses the process capabilities of turning over other machining operations and describes the classification, controlling methods, attachments, and accessories of a lathe machine. It reviews the design and various operations of single-point cutting tools in turning. In addition, the article discusses the influence of various factors on selection of equipment and machining procedure for a specific part. These include the size and configuration of the workpiece, equipment capacity, production quantity, dimensional accuracy, number of operations, and the surface finish. It presents examples that describe or compare equipment and techniques for production applications. Finally, the article provides a discussion on the classification and compatibility of cutting fluids.

Boring is a machining process in which internal diameters are generated in true relation to the centerline of the spindle by means of single-point cutting tools. This article provides a discussion on boring machines and boring tools and presents a comprehensive discussion on the various elements of boring. The elements are composition and hardness of workpiece metal, cutting fluid, speeds and feeds, and methods for piloting and supporting tools in boring applications. The article explains the role of workpiece size in selecting the equipment and processing procedure and the use of techniques to overcome difficulties presented by workpiece configuration. It describes the factors related to accuracy of boring and factors affecting them. The article also presents a discussion on close-tolerance boring and methods of controlling vibration and chatter. It concludes with a section presenting information on the use of boring equipment for machining operations other than boring.

This article provides information on the factors influencing the selection of the proper corrosion-resistant coating system. It focuses on the proper execution of surface preparation and the available surface preparation methods. The preparation process includes the removal of visible contaminants, removal of invisible contaminants, and roughening of the surface. Solvent or chemical washing, steam cleaning, hand tool cleaning, power tool cleaning, water blasting, and abrasive blast cleaning, are some preparation methods discussed. The article describes the most common application techniques of coating as well as the equipment used. An overview of some of the most common coating inspection points and inspection equipment is also provided.

Shot peen forming is a manufacturing process in which local compressive residual stresses form thin sheet metals and structural components in one or more dimensions. This article discusses the principle of the process with an emphasis on fundamental mechanisms. It presents the basic considerations in the simulation of shot peen forming and provides information on single impact and multiple-impact peening simulations. The article describes the equipment and tooling used in the process. It also analyzes the influence of process parameters on shot peen forming and illustrates possible shapes and contours, which are producible by shot peen forming. The article concludes with a table that presents typical peen forming applications in the aircraft and aerospace industries.

This article describes the general concepts and practices related to manufacturing and design. It discusses the activities of design and manufacturing by placing it in the context of the business system that they support. The article presents an overview of the manufacturing technology field from a design and material selection perspective. It provides an insight to the complex relationship among design, material selection, and manufacturing. The article offers information on modern design for manufacturing practices that are widely used in the industry.

Machining or material removal processes are secondary manufacturing operations that are used to achieve precise tolerances or to impart controlled surface finishes to a part. This article summarizes rules for designing parts to improve machined part quality and reduce machining costs in mass and batch production environments. It discusses the factors affecting the total cost of a machining operation, including raw material costs, labor costs, and equipment costs. The article describes three types of machining systems, namely, general-purpose machine tools, production machining systems, and computer numerically controlled (CNC) machining systems. It reviews general design-for-machining rules that are applicable to all parts, regardless of the type of equipment used to produce them. Special considerations for production machining systems and CNC machining systems are discussed. The article describes the structure and typical uses of computer-aided process planning and design-for-manufacturing programs.

When a heat of steel is melted and refined, it is necessary to solidify it into useful forms for further processing or final use. Ingot casting remains the preferred method for certain specialty, tool, forging, and remelted steels. This article discusses the methods, equipment, and theory for pouring, solidifying, and stripping steel ingots. It describes two basic types of pouring methods, top pouring and bottom pouring, and provides information on equipment such as hot tops, ingot molds, and stools. The design of the ingot is dictated by the application and type of steel involved. The article concludes with information on the applications of solidification simulation.

This article provides a detailed account on forming operations (blanking, piercing, press-brake forming, contour rolling, deep drawing, cold forming, and hot forming) of various nonferrous metals, including aluminum alloys, beryllium, copper and its alloys, magnesium alloys, nickel alloys, titanium alloys, and platinum metals. It discusses the formability, equipment and tooling, and lubricants used in the forming operations of these nonferrous metals.

This article suggests procedures to increase the availability and function of patterns and tooling. It discusses the common expected failure mechanisms, such as erosion and fatigue, for dies and patterns. A successful maintenance program requires good record keeping for each tool. The article lists information required for the maintenance tooling record and preventive maintenance (PM) items from the North American Die Casting Association's publication E501. It concludes with information on objectives for proper storage of tools and patterns. The objectives are preventing tool degradation, safe workplace, easy location, proximity, and cataloging and tracking.

Machining is a term that covers a large collection of manufacturing processes designed to remove unwanted material, usually in the form of chips, from a workpiece. This article discusses the basic classes of machining operations, including conventional, abrasive, and nontraditional, and outlines the type of costs incurred by the process. It describes the types of machining equipment, including general-purpose machine tools, production machining systems, and computer numerically controlled machining systems. The article lists the common classes of metallic work materials, in order of decreasing machinability. It also shows the range of dimensional and surface finish tolerances in graphical form that can be achieved using various machining processes under general machining conditions.

Good hole-drilling processes are key to joining composite parts with other composite parts or with metal parts. This article discusses the considerations for drilling polymer-matrix composites. It describes the use of power-feed drill motors and automated drilling/fastener installation equipment. The article provides a discussion on reaming, countersinking, and three recommended choices of cutting tools for producing a countersink in carbon/epoxy structure. The cutting tools include: standard carbide insert cutters, solid carbide cutters, or polycrystalline diamond (PCD) insert cutters. The article concludes with a discussion on inspection of hole quality.

Tubing of any cross-sectional shape can be straightened by using various equipment and techniques. This article provides a discussion on principal factors that influence the procedures and tooling of tube straightening. It describes the tooling and application of different types of tube straightening techniques, namely, press straightening, parallel-roll straightening, two-roll rotary straightening, multiple-roll rotary straightening, and ovalizing in rotary straighteners.